Search Results

Search found 11110 results on 445 pages for 'ebs 12'.

Page 53/445 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Wireless Connected But No Internet Connection (Ubuntu 12.04)

  - by Zxy

  I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

  Read the article

• Is Google tracking our web history even when we do not visit Google or if affiliate websites?

  - by Anoyon-12

  I have recently updated to Google Chrome 29.0.1547.76. And when I click a the new tab button there is a new homepage now. Ok. My current settings forbid from third party cookies being set. And I clear all of my browsing data every time I close or well if its been too long browsing. Ok so there is this help dialog that appears first time you open the new tab page. What I did was Cleared all my browsing settings (From Beginning of time) and then again I went to the new tab, the Help dialog appears. And for the third time I did the same and the Same thing Happened. So For the fourth time I cleared all my Browsing data. Clicked open new tab and then. navigate myself to chrome://settings/cookies. and there were So does this mean google is tracking our web History just for using Chrome. I know Its not Illegal because these cookies only appear when you click the new tab Google Chrome 29.0.1547.76. maybe that was the reason google redesigned the entire New:tab page. From this Google is forcing us to allow them track us. I don't want to set another page as my new:tab page. I just want the old one. Google has a long History of invading Privacy without users consent. There was that Safari incident. I am sure you people remember. So can anyone tell me about this issue? I maybe wrong. So please explain.

  Read the article

• Replication: SQL Server 2008 Publisher with SQL Server Express 2005 Subscriber

  - by Jeremy

  Here is the setup: SQL Server 2008 Enterprise Server with a Merge Publication. SQL Server 2005 Express with pull subscription. There is no web or ftp setup. This is direct merge replication. Using the RMO objects from C#, I get a "class cannot be found." COM Error when accessing the MergePullSubscription.SynchronizationAgent property. I've tried with both the 2008 RMO dll's (version 10 dll's) and the 2005 RMO dll's (version 9 dll's). When trying to use replmerge.exe, I get the following: 2010-04-10 04:12:05.263 Microsoft SQL Server Merge Agent 9.00.1399.06 2010-04-10 04:12:05.294 Copyright (c) 2000 Microsoft Corporation 2010-04-10 04:12:05.294 2010-04-10 04:12:05.294 The timestamps prepended to the output lines are express ed in terms of UTC time. 2010-04-10 04:12:05.294 User-specified agent parameter values: -Publisher SUN -PublisherDB PRIMROSE -PublisherSecurityMode 1 -Publication PRIMROSE -Distributor SUN -DistributorSecurityMode 1 -Subscriber PVILLE\SQLEXPRESS -SubscriberSecurityMode 1 -SubscriberDB PRIMROSE -SubscriptionType 1 -DistributorLogin sa -DistributorPassword ********** -DistributorSecurityMode 0 -PublisherLogin sa -PublisherPassword ********** -PublisherSecurityMode 0 -SubscriberLogin sa -SubscriberPassword ********** -SubscriberSecurityMode 0 2010-04-10 04:12:05.325 Connecting to Subscriber 'PVILLE\SQLEXPRESS' 2010-04-10 04:12:05.481 Connecting to Distributor 'SUN' 2010-04-10 04:12:05.513 The version of SQL Server running at the Distributor(10. 0.2531.??????????????????) is not compatible with the version of SQL Server runn ing at the Subscriber(9.00.1399.???????L?L?LHL?L?L?L?,?). 2010-04-10 04:12:05.513 Category:NULL Source: Merge Process Number: -2147200979 Message: The version of SQL Server running at the Distributor(10.0.2531.???????? ??????????) is not compatible with the version of SQL Server running at the Subs criber(9.00.1399.???????L?L?LHL?L?L?L?,?). Any ideas?

  Read the article

• changing value of a textview while change in other textview by multiplying

  - by sur007

  Here I am getting parsed data from a URL and now I am trying to change the value of parse data to users only dynamically on an text view and my code is package com.mokshya.jsontutorial; import java.text.DecimalFormat; import java.util.ArrayList; import java.util.HashMap; import org.json.JSONArray; import org.json.JSONException; import org.json.JSONObject; import org.w3c.dom.Document; import org.w3c.dom.Element; import org.w3c.dom.NodeList; import com.mokshya.jsontutorialhos.xmltest.R; import android.app.AlertDialog; import android.app.ListActivity; import android.content.DialogInterface; import android.content.Intent; import android.os.Bundle; import android.text.Editable; import android.text.TextWatcher; import android.util.Log; import android.view.View; import android.widget.AdapterView; import android.widget.AdapterView.OnItemClickListener; import android.widget.EditText; import android.widget.ListAdapter; import android.widget.ListView; import android.widget.SimpleAdapter; import android.widget.TextView; import android.widget.Toast; public class Main extends ListActivity { EditText resultTxt; public double C_webuserDouble; public double C_cashDouble; public double C_transferDouble; public double S_webuserDouble; public double S_cashDouble; public double S_transferDouble; TextView cashTxtView; TextView webuserTxtView; TextView transferTxtView; TextView S_cashTxtView; TextView S_webuserTxtView; TextView S_transferTxtView; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.listplaceholder); cashTxtView = (TextView) findViewById(R.id.cashTxtView); webuserTxtView = (TextView) findViewById(R.id.webuserTxtView); transferTxtView = (TextView) findViewById(R.id.transferTxtView); S_cashTxtView = (TextView) findViewById(R.id.S_cashTxtView); S_webuserTxtView = (TextView) findViewById(R.id.S_webuserTxtView); S_transferTxtView = (TextView) findViewById(R.id.S_transferTxtView); ArrayList<HashMap<String, String>> mylist = new ArrayList<HashMap<String, String>>(); JSONObject json = JSONfunctions .getJSONfromURL("http://ldsclient.com/ftp/strtojson.php"); try { JSONArray netfoxlimited = json.getJSONArray("netfoxlimited"); for (inti = 0; i < netfoxlimited.length(); i++) { HashMap<String, String> map = new HashMap<String, String>(); JSONObject e = netfoxlimited.getJSONObject(i); map.put("date", e.getString("date")); map.put("c_web", e.getString("c_web")); map.put("c_bank", e.getString("c_bank")); map.put("c_cash", e.getString("c_cash")); map.put("s_web", e.getString("s_web")); map.put("s_bank", e.getString("s_bank")); map.put("s_cash", e.getString("s_cash")); mylist.add(map); } } catch (JSONException e) { Log.e("log_tag", "Error parsing data " + e.toString()); } ListAdapter adapter = new SimpleAdapter(this, mylist, R.layout.main, new String[] { "date", "c_web", "c_bank", "c_cash", "s_web", "s_bank", "s_cash", }, new int[] { R.id.item_title, R.id.webuserTxtView, R.id.transferTxtView, R.id.cashTxtView, R.id.S_webuserTxtView, R.id.S_transferTxtView, R.id.S_cashTxtView }); setListAdapter(adapter); final ListView lv = getListView(); lv.setTextFilterEnabled(true); lv.setOnItemClickListener(new OnItemClickListener() { public void onItemClick(AdapterView<?> parent, View view, int position, long id) { @SuppressWarnings("unchecked") HashMap<String, String> o = (HashMap<String, String>) lv .getItemAtPosition(position); Toast.makeText(Main.this, "ID '" + o.get("id") + "' was clicked.", Toast.LENGTH_SHORT).show(); } }); resultTxt = (EditText) findViewById(R.id.editText1); resultTxt.setOnClickListener(new View.OnClickListener() { public void onClick(View arg0) { // TODO Auto-generated method stub resultTxt.setText(""); } }); resultTxt.addTextChangedListener(new TextWatcher() { public void afterTextChanged(Editable arg0) { // TODO Auto-generated method stub String text; text = resultTxt.getText().toString(); if (resultTxt.getText().length() > 5) { calculateSum(C_webuserDouble, C_cashDouble, C_transferDouble); calculateSunrise(S_webuserDouble, S_cashDouble, S_transferDouble); } else { } } public void beforeTextChanged(CharSequence s, int start, int count, int after) { // TODO Auto-generated method stub } public void onTextChanged(CharSequence s, int start, int before, int count) { // TODO Auto-generated method stub } }); } private void calculateSum(Double webuserDouble, Double cashDouble, Double transferDouble) { String Qty; Qty = resultTxt.getText().toString(); if (Qty.length() > 0) { double QtyValue = Double.parseDouble(Qty); double cashResult; double webuserResult; double transferResult; cashResult = cashDouble * QtyValue; webuserResult = webuserDouble * QtyValue; transferResult = transferDouble * QtyValue; DecimalFormat df = new DecimalFormat("#.##"); String cashResultStr = df.format(cashResult); String webuserResultStr = df.format(webuserResult); String transferResultStr = df.format(transferResult); cashTxtView.setText(String.valueOf(cashResultStr)); webuserTxtView.setText(String.valueOf(webuserResultStr)); transferTxtView.setText(String.valueOf(transferResultStr)); // cashTxtView.setFilters(new InputFilter[] {new // DecimalDigitsInputFilter(2)}); } if (Qty.length() == 0) { cashTxtView.setText(String.valueOf(cashDouble)); webuserTxtView.setText(String.valueOf(webuserDouble)); transferTxtView.setText(String.valueOf(transferDouble)); } } private void calculateSunrise(Double webuserDouble, Double cashDouble, Double transferDouble) { String Qty; Qty = resultTxt.getText().toString(); if (Qty.length() > 0) { double QtyValue = Double.parseDouble(Qty); double cashResult; double webuserResult; double transferResult; cashResult = cashDouble * QtyValue; webuserResult = webuserDouble * QtyValue; transferResult = transferDouble * QtyValue; DecimalFormat df = new DecimalFormat("#.##"); String cashResultStr = df.format(cashResult); String webuserResultStr = df.format(webuserResult); String transferResultStr = df.format(transferResult); S_cashTxtView.setText(String.valueOf(cashResultStr)); S_webuserTxtView.setText(String.valueOf(webuserResultStr)); S_transferTxtView.setText(String.valueOf(transferResultStr)); } if (Qty.length() == 0) { S_cashTxtView.setText(String.valueOf(cashDouble)); S_webuserTxtView.setText(String.valueOf(webuserDouble)); S_transferTxtView.setText(String.valueOf(transferDouble)); } } } and I am getting following error on logcat 08-28 15:04:12.839: E/AndroidRuntime(584): Uncaught handler: thread main exiting due to uncaught exception 08-28 15:04:12.848: E/AndroidRuntime(584): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.mokshya.jsontutorialhos.xmltest/com.mokshya.jsontutorial.Main}: java.lang.NullPointerException 08-28 15:04:12.848: E/AndroidRuntime(584): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2401) 08-28 15:04:12.848: E/AndroidRuntime(584): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2417) 08-28 15:04:12.848: E/AndroidRuntime(584): at android.app.ActivityThread.access$2100(ActivityThread.java:116) 08-28 15:04:12.848: E/AndroidRuntime(584): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1794) 08-28 15:04:12.848: E/AndroidRuntime(584): at android.os.Handler.dispatchMessage(Handler.java:99) 08-28 15:04:12.848: E/AndroidRuntime(584): at android.os.Looper.loop(Looper.java:123) 08-28 15:04:12.848: E/AndroidRuntime(584): at android.app.ActivityThread.main(ActivityThread.java:4203) 08-28 15:04:12.848: E/AndroidRuntime(584): at java.lang.reflect.Method.invokeNative(Native Method) 08-28 15:04:12.848: E/AndroidRuntime(584): at java.lang.reflect.Method.invoke(Method.java:521) 08-28 15:04:12.848: E/AndroidRuntime(584): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 08-28 15:04:12.848: E/AndroidRuntime(584): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 08-28 15:04:12.848: E/AndroidRuntime(584): at dalvik.system.NativeStart.main(Native Method) 08-28 15:04:12.848: E/AndroidRuntime(584): Caused by: java.lang.NullPointerException 08-28 15:04:12.848: E/AndroidRuntime(584): at com.mokshya.jsontutorial.Main.onCreate(Main.java:111) 08-28 15:04:12.848: E/AndroidRuntime(584): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1123) 08-28 15:04:12.848: E/AndroidRuntime(584): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2364)

  Read the article

• How to style "form" field labels in Windows Phone 7?

  - by Jeremy Bell

  Is there any standards guidance on how to style field labels next to form fields in windows phone 7 silverlight applications? For example, let's say I have a StackPanel with the TextBlock label and a TextBox for data entry. Currently I am using the default TextBlock Margin included in the PhoneTextSubtleStyle ("12,0,12,0"), and using a Margin of "0,-12,0,0" to push the TextBox up closer to the label: <StackPanel HorizontalAlignment="Left"> <TextBlock VerticalAlignment="Center" Text="Name" Style="{StaticResource PhoneTextSubtleStyle}" /> <TextBox Text="{Binding ItemName, Mode=TwoWay}" TextChanged="TextBox_TextChanged" VerticalAlignment="Center" Width="433" Margin="0,-12,0,0" /> </StackPanel> Note that the TextBox seems to have some internal padding of 12 pixels to the left and right, so that the TextBlock label and the TextBox control visually line up perfectly on the left. The problem is, I see existing apps with widely varying conventions for field label styling. Some do not do the negative margin adjustment, like I have above. Some don't. Some appear to override the label TextBlock Margin so that it is indented an additional 12 pixels on the left (i.e. "24,0,12,0" instead of the default "12,0,12,0"). Some apps put the labels to the left of the fields themselves (I hate that). Is there some standard design guidance on field labels in Windows Phone 7? I read through the design template PDF and could only determine that the field labels should be upper case on the first word (preferably only one word labels), and should NOT have a colon at the end. I didn't see anything with regards to margins or alignment between the label and the field.

  Read the article

• Asterisk SIP digest authentication username mismatch

  - by Matt

  I have an asterisk system that I'm attempting to get to work as a backup for our 3com system. We already use it for a conference bridge. Our phones are the 3com 3C10402B, so I don't have the issue of older 3com phones that come without a SIP image. The 3com phones are communicating SIP with the Asterisk, but are unable to register because they present a digest username value that doesn't match what Asterisk thinks it should. As an example, here are the relevant lines from a successful registration from a soft phone: Server sends: WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="1cac3853" Phone responds: Authorization: Digest username="2321", realm="asterisk", nonce="1cac3853", uri="sip:192.168.254.12", algorithm=md5, response="d32df9ec719817282460e7c2625b6120" For the 3com phone, those same lines look like this (and fails): Server sends: WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="6c915c33" Phone responds: Authorization: Digest username="sip:[email protected].12", realm="asterisk", nonce="6c915c33", uri="sip:192.168.254.12", opaque="", algorithm=MD5, response="a89df25f19e4b4598595f919dac9db81" Basically, Asterisk wants to see a username in the Digest username field of 2321, but the 3com phone is sending sip:[email protected].12. Anyone know how to tell asterisk to accept this format of username in the digest authentication? Here is the sip.conf info for that extension: [2321] deny=0.0.0.0/0.0.0.0 disallow=all type=friend secret=1234 qualify=yes port=5060 permit=0.0.0.0/0.0.0.0 nat=yes mailbox=2321@device host=dynamic dtmfmode=rfc2833 dial=SIP/2321 context=from-internal canreinvite=no callerid=device <2321 allow=ulaw, alaw call-limit=50 ... and for those interested in the grit, here is the debug output of the registration attempt: REGISTER sip:192.168.254.12 SIP/2.0 v: SIP/2.0/UDP 192.168.254.157:5060 t: f: i: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER Max-Forwards: 70 m: ;dt=544 Expires: 3600 User-Agent: 3Com-SIP-Phone/V8.0.1.3 X-3Com-PhoneInfo: firstRegistration=no; primaryCallP=192.168.254.12; secondaryCallP=0.0.0.0; --- (11 headers 0 lines) --- Using latest REGISTER request as basis request Sending to 192.168.254.157 : 5060 (no NAT) SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: Content-Length: 0 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: ;tag=as3fb867e2 Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="6c915c33" Content-Length: 0 Scheduling destruction of SIP dialog 'fa4451d8-01d6-1cc2-13e4-00e0bb33beb9' in 32000 ms (Method: REGISTER) confbridge*CLI REGISTER sip:192.168.254.12 SIP/2.0 v: SIP/2.0/UDP 192.168.254.157:5060 t: f: i: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER Max-Forwards: 70 m: ;dt=544 Expires: 3600 User-Agent: 3Com-SIP-Phone/V8.0.1.3 Authorization: Digest username="sip:[email protected].12", realm="asterisk", nonce="6c915c33", uri="sip:192.168.254.12", opaque="", algorithm=MD5, response="a89df25f19e4b4598595f919dac9db81" X-3Com-PhoneInfo: firstRegistration=no; primaryCallP=192.168.254.12; secondaryCallP=0.0.0.0; --- (12 headers 0 lines) --- Using latest REGISTER request as basis request Sending to 192.168.254.157 : 5060 (NAT) SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: Content-Length: 0 SIP/2.0 403 Authentication user name does not match account name Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: ;tag=as3fb867e2 Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Content-Length: 0 Scheduling destruction of SIP dialog 'fa4451d8-01d6-1cc2-13e4-00e0bb33beb9' in 32000 ms (Method: REGISTER) Thanks for your input!

  Read the article

• Asterisk SIP digest authentication username mismatch

  - by Matt

  I have an asterisk system that I'm attempting to get to work as a backup for our 3com system. We already use it for a conference bridge. Our phones are the 3com 3C10402B, so I don't have the issue of older 3com phones that come without a SIP image. The 3com phones are communicating SIP with the Asterisk, but are unable to register because they present a digest username value that doesn't match what Asterisk thinks it should. As an example, here are the relevant lines from a successful registration from a soft phone: Server sends: WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="1cac3853" Phone responds: Authorization: Digest username="2321", realm="asterisk", nonce="1cac3853", uri="sip:192.168.254.12", algorithm=md5, response="d32df9ec719817282460e7c2625b6120" For the 3com phone, those same lines look like this (and fails): Server sends: WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="6c915c33" Phone responds: Authorization: Digest username="sip:[email protected].12", realm="asterisk", nonce="6c915c33", uri="sip:192.168.254.12", opaque="", algorithm=MD5, response="a89df25f19e4b4598595f919dac9db81" Basically, Asterisk wants to see a username in the Digest username field of 2321, but the 3com phone is sending sip:[email protected].12. Anyone know how to tell asterisk to accept this format of username in the digest authentication? Here is the sip.conf info for that extension: [2321] deny=0.0.0.0/0.0.0.0 disallow=all type=friend secret=1234 qualify=yes port=5060 permit=0.0.0.0/0.0.0.0 nat=yes mailbox=2321@device host=dynamic dtmfmode=rfc2833 dial=SIP/2321 context=from-internal canreinvite=no callerid=device <2321 allow=ulaw, alaw call-limit=50 ... and for those interested in the grit, here is the debug output of the registration attempt: REGISTER sip:192.168.254.12 SIP/2.0 v: SIP/2.0/UDP 192.168.254.157:5060 t: f: i: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER Max-Forwards: 70 m: ;dt=544 Expires: 3600 User-Agent: 3Com-SIP-Phone/V8.0.1.3 X-3Com-PhoneInfo: firstRegistration=no; primaryCallP=192.168.254.12; secondaryCallP=0.0.0.0; --- (11 headers 0 lines) --- Using latest REGISTER request as basis request Sending to 192.168.254.157 : 5060 (no NAT) SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: Content-Length: 0 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: ;tag=as3fb867e2 Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18580 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces WWW-Authenticate: Digest algorithm=MD5, realm="asterisk", nonce="6c915c33" Content-Length: 0 Scheduling destruction of SIP dialog 'fa4451d8-01d6-1cc2-13e4-00e0bb33beb9' in 32000 ms (Method: REGISTER) confbridge*CLI REGISTER sip:192.168.254.12 SIP/2.0 v: SIP/2.0/UDP 192.168.254.157:5060 t: f: i: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER Max-Forwards: 70 m: ;dt=544 Expires: 3600 User-Agent: 3Com-SIP-Phone/V8.0.1.3 Authorization: Digest username="sip:[email protected].12", realm="asterisk", nonce="6c915c33", uri="sip:192.168.254.12", opaque="", algorithm=MD5, response="a89df25f19e4b4598595f919dac9db81" X-3Com-PhoneInfo: firstRegistration=no; primaryCallP=192.168.254.12; secondaryCallP=0.0.0.0; --- (12 headers 0 lines) --- Using latest REGISTER request as basis request Sending to 192.168.254.157 : 5060 (NAT) SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: Content-Length: 0 SIP/2.0 403 Authentication user name does not match account name Via: SIP/2.0/UDP 192.168.254.157:5060;received=192.168.254.157 From: To: ;tag=as3fb867e2 Call-ID: fa4451d8-01d6-1cc2-13e4-00e0bb33beb9 CSeq: 18581 REGISTER User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Content-Length: 0 Scheduling destruction of SIP dialog 'fa4451d8-01d6-1cc2-13e4-00e0bb33beb9' in 32000 ms (Method: REGISTER) Thanks for your input!

  Read the article

• Fusion HCM SaaS – Integration

  - by Kiran Mundy

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Fusion HCM SaaS – Integration A typical implementation pattern we’re seeing with Fusion Apps early adopters is implementing a few Fusion HCM applications that bring the most benefit to their company with the least disruption to existing programs and interfaces. Very often this ends up being Fusion Goals & Performance, Talent, Compensation or Benefits, often with Taleo for recruiting. The implementation picture looks like what you see below: Here, you can see that all the “downstream integrations” from the On-Premise Core HR, are unaffected because the master for employee data is still your On-Premise Core HR system – all updates and new hires are made here (although they may be fed in from Taleo to start with). As a second phase when customers migrate Core HR to Fusion HCM, they have to come up with a strategy to manage integrations to all their downstream applications that require employee details. For customers coming from EBS HR, a short term strategy that allows for minimal impact, is to extract employee data from Fusion (Via HCM Extract), and load the shared EBS HR tables (which are part of an EBS Financials install anyways), and let your downstream integrations continue to function based on this data as shown below. If you are not coming from EBS HR and there are license implications, you may want to consider: Creating an On-Premise warehouse for extracting data from Fusion Apps. Leveraging Fusion Apps Web Services (available to SaaS customers starting R7) to directly retrieve/write data to Fusion Apps. Integration Tools File Based Loader This is the primary mechanism for loading HCM data (both initial load and incremental updates) into Fusion HCM. Employee & related data can be uploaded into Fusion HCM using File Based Loader. Note that ability to schedule File Based Loader to run on a pre-defined schedule will be available as a patch on top of Rel 5. Hr2Hr has been deprecated in favor of File Based Loader, but for existing customers using Hr2Hr, here are some sample scripts that show how to get more informative error messages. They can be run by creating data model sql queries in BI Publisher. The scripts currently have hard coded values for request id and loader batch id, which your developer will need to update to the correct values for you. The BI Publisher Training Session recorded on Apr 18th is available here (under "Recordings"). This will enable a somewhat technical resource to create a data model sql query. Links to Documentation & Traning Reference documentation for File Based Loader on docs.oracle.com FBL 1.1 MOS Doc Id 1533860.1 Sample demo data files for File Based Loader HCM SaaS Integrations ppt and recording. EBS api's Loading Information into EBS Full or Shared HCM This could be candidate information being loaded from Taleo into EBS or  Employee information being loaded from Fusion HCM into an EBS shared HR install (for downstream applications & EBS Financials). Oracle HRMS Product Family Publicly Callable Business Process APIs (A Reference Consolidation) [ID 216838.1] This is a guide to the EBS R12 Integration Repository accessible from an EBS instance. EBS HRMS Publicly Callable Business Process APIs in Release 11i & 12 [ID 121964.1] Fusion HCM Extract Fusion HCM Extract is the primary mechanism used to extract employee information from Fusion HCM. Refer to the "Configure Identity Sync" doc on MOS  for additional mechanisms. Additional documentation (you'll need an oracle.com account to access) HCM Extracts User Guides (Rel 4 & 5) HCM Extract Entity/Attributes (Rel 5) HCM Extract User Guide (Rel 5) If you don’t have an oracle.com account, download the zipped HCM Extract Rel 5 Docs (Click on File --> Download on next screen). View Training Recordings on Fusion HCM Extract Benefits Extract To setup the benefits extract, refer to the following guide. Page 2-15 of the User Documentation describes how to use the benefits extract. Benefit enrollments can also be uploaded into Fusion Benefits. Instructions are here along with a sample upload file. However, if the defined benefits extract does not meet your requirements, you can use BI Publisher (Link to BI Publisher presentation recording from Apr 18th) to create your own version of Benefits extract. You can start with the data model query underlying the benefits extract. Payroll Interface Fusion Payroll Interface enables you to capture personal payroll information, such as earnings and deductions, along with other data from Oracle Fusion Human Capital Management, and send that information to a third-party payroll provider. Documentation: Payroll interface guide Sample file DBI's used for the payroll interface.Usage Patterns always accessible @ http://www.finapps.com Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• grub2 loopback booting ubuntu server iso

  - by Thermionix

  I've got usb-keys setup to multi-boot different linux images using grub2 loopback. The standard ubuntu release isos boot fine, however when attempting to use the server iso it will fail to install saying 'unable to detect cd-media for installation'. the grub.cfg entry; menuentry "ubuntu-12.04-server-amd64" { set isofile="/boot/ubuntu-12.04-server-amd64.iso" loopback loop $isofile linux (loop)/install/vmlinuz file=$isofile/preseed/ubuntu-server.seed ro noprompt noeject -- initrd (loop)/install/initrd.gz } I've attempted to add the following parameters as the fromiso works for debian images on the key iso-scan/filename=/boot/ubuntu-12.04-server-amd64.iso iso-scan/filename=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso fromiso=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso

  Read the article

• Iptables on ubuntu Ubuntu 10.04.1 not working

  - by Kevin

  I am trying to block an IP address from accessing my server by using iptables, but didn't succeed. Here are the commands that I used. (after these commands, I still keep seeing 50.18.12.86 sending request to my Apache server). sudo iptables -F sudo iptables -I OUTPUT -s 50.18.12.86 -j REJECT sudo iptables -I INPUT -s 50.18.12.86 -j REJECT sudo iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination REJECT all -- 50.18.12.86 0.0.0.0/0 reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination REJECT all -- 50.18.12.86 0.0.0.0/0 reject-with icmp-port-unreachable I have tried DROP instead of REJECT, but doesn't help.

  Read the article

• Ubuntu missing from the Grub menu

  - by varevarao

  Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

  Read the article

• Forward TCP Connections with Iptables

  - by opc0de

  I receive connections to my server from several ip addresses I want to route these connections just like rinetd does but based on the ip the connection is coming from to connect to a specified host. Just like this: IP 10.10.12.1 => CONNECTS TO MY SERVER => MY SERVER REDIRECTS IT TO 82.12.12.1 IP 10.10.12.2 => CONNECTS TO MY SERVER => MY SERVER REDIRECTS IT TO 81.121.12.10 etc Is it possible or do I need to write my own daemon to achieve this functionality ?

  Read the article

• ?Pick UP!?~Twitter????~ 1?4?????????????????

  - by OTN-J Master

  ????????????Java Magazine Vol.12?????????????????????????????????Java??????????????Twitter??Java?????????????#???????~Twitter??Java ?????(JVM)???????????~2?????????·??????1????4??????????????Twitter?????????????????????????????Twitter??????????Java ?????(JVM)????????????????????????????????????????????????????(Fail Wheel)??????????????????Twitter???????????????????????????????Java????????????Java??????????????????????????????Twitter??????????????????????????????????Twitter??????JVM????????????????????????????????????????????????????????????????????????? (Java Magazine Vol.12??)~??????~Twitter????????????????????Robert Benson????????????????Twitter??????????????????????????????????????????????????????????????????????????Java?????(JVM)??????????????????????Twitter??????????????????????????????????JVM???????????????? (Java Magazine Vol.12??)Twitter????????????????????????????10???????Twitter??????????1????????·????????????????????????????????????????????????????Twitter??????????????????Twitter????????????????????????????????????????????????????Twitter??????????????????Twitter????????Twitter??????????????????(?????????)???????????????????????????????2010?????????????????Twitter????????????????????????????????????????????? ····· ?????Java Magazine Vol.12 ????????????????? (P14???????????) (????????????????????????????????????????)>> Java Magazine????????????????? ????? Twitter?????(Java Magazine Vol.12??) Twitter????1?3???????????????????

  Read the article

• Node.js Adventure - When Node Flying in Wind

  - by Shaun

  In the first post of this series I mentioned some popular modules in the community, such as underscore, async, etc.. I also listed a module named “Wind (zh-CN)”, which is created by one of my friend, Jeff Zhao (zh-CN). Now I would like to use a separated post to introduce this module since I feel it brings a new async programming style in not only Node.js but JavaScript world. If you know or heard about the new feature in C# 5.0 called “async and await”, or you learnt F#, you will find the “Wind” brings the similar async programming experience in JavaScript. By using “Wind”, we can write async code that looks like the sync code. The callbacks, async stats and exceptions will be handled by “Wind” automatically and transparently.   What’s the Problem: Dense “Callback” Phobia Let’s firstly back to my second post in this series. As I mentioned in that post, when we wanted to read some records from SQL Server we need to open the database connection, and then execute the query. In Node.js all IO operation are designed as async callback pattern which means when the operation was done, it will invoke a function which was taken from the last parameter. For example the database connection opening code would be like this. 1: sql.open(connectionString, function(error, conn) { 2: if(error) { 3: // some error handling code 4: } 5: else { 6: // connection opened successfully 7: } 8: }); And then if we need to query the database the code would be like this. It nested in the previous function. 1: sql.open(connectionString, function(error, conn) { 2: if(error) { 3: // some error handling code 4: } 5: else { 6: // connection opened successfully 7: conn.queryRaw(command, function(error, results) { 8: if(error) { 9: // failed to execute this command 10: } 11: else { 12: // records retrieved successfully 13: } 14: }; 15: } 16: }); Assuming if we need to copy some data from this database to another then we need to open another connection and execute the command within the function under the query function. 1: sql.open(connectionString, function(error, conn) { 2: if(error) { 3: // some error handling code 4: } 5: else { 6: // connection opened successfully 7: conn.queryRaw(command, function(error, results) { 8: if(error) { 9: // failed to execute this command 10: } 11: else { 12: // records retrieved successfully 13: target.open(targetConnectionString, function(error, t_conn) { 14: if(error) { 15: // connect failed 16: } 17: else { 18: t_conn.queryRaw(copy_command, function(error, results) { 19: if(error) { 20: // copy failed 21: } 22: else { 23: // and then, what do you want to do now... 24: } 25: }; 26: } 27: }; 28: } 29: }; 30: } 31: }); This is just an example. In the real project the logic would be more complicated. This means our application might be messed up and the business process will be fragged by many callback functions. I would like call this “Dense Callback Phobia”. This might be a challenge how to make code straightforward and easy to read, something like below. 1: try 2: { 3: // open source connection 4: var s_conn = sqlConnect(s_connectionString); 5: // retrieve data 6: var results = sqlExecuteCommand(s_conn, s_command); 7: 8: // open target connection 9: var t_conn = sqlConnect(t_connectionString); 10: // prepare the copy command 11: var t_command = getCopyCommand(results); 12: // execute the copy command 13: sqlExecuteCommand(s_conn, t_command); 14: } 15: catch (ex) 16: { 17: // error handling 18: }   What’s the Problem: Sync-styled Async Programming Similar as the previous problem, the callback-styled async programming model makes the upcoming operation as a part of the current operation, and mixed with the error handling code. So it’s very hard to understand what on earth this code will do. And since Node.js utilizes non-blocking IO mode, we cannot invoke those operations one by one, as they will be executed concurrently. For example, in this post when I tried to copy the records from Windows Azure SQL Database (a.k.a. WASD) to Windows Azure Table Storage, if I just insert the data into table storage one by one and then print the “Finished” message, I will see the message shown before the data had been copied. This is because all operations were executed at the same time. In order to make the copy operation and print operation executed synchronously I introduced a module named “async” and the code was changed as below. 1: async.forEach(results.rows, 2: function (row, callback) { 3: var resource = { 4: "PartitionKey": row[1], 5: "RowKey": row[0], 6: "Value": row[2] 7: }; 8: client.insertEntity(tableName, resource, function (error) { 9: if (error) { 10: callback(error); 11: } 12: else { 13: console.log("entity inserted."); 14: callback(null); 15: } 16: }); 17: }, 18: function (error) { 19: if (error) { 20: error["target"] = "insertEntity"; 21: res.send(500, error); 22: } 23: else { 24: console.log("all done."); 25: res.send(200, "Done!"); 26: } 27: }); It ensured that the “Finished” message will be printed when all table entities had been inserted. But it cannot promise that the records will be inserted in sequence. It might be another challenge to make the code looks like in sync-style? 1: try 2: { 3: forEach(row in rows) { 4: var entity = { /* ... */ }; 5: tableClient.insert(tableName, entity); 6: } 7:  8: console.log("Finished"); 9: } 10: catch (ex) { 11: console.log(ex); 12: }   How “Wind” Helps “Wind” is a JavaScript library which provides the control flow with plain JavaScript for asynchronous programming (and more) without additional pre-compiling steps. It’s available in NPM so that we can install it through “npm install wind”. Now let’s create a very simple Node.js application as the example. This application will take some website URLs from the command arguments and tried to retrieve the body length and print them in console. Then at the end print “Finish”. I’m going to use “request” module to make the HTTP call simple so I also need to install by the command “npm install request”. The code would be like this. 1: var request = require("request"); 2:  3: // get the urls from arguments, the first two arguments are `node.exe` and `fetch.js` 4: var args = process.argv.splice(2); 5:  6: // main function 7: var main = function() { 8: for(var i = 0; i < args.length; i++) { 9: // get the url 10: var url = args[i]; 11: // send the http request and try to get the response and body 12: request(url, function(error, response, body) { 13: if(!error && response.statusCode == 200) { 14: // log the url and the body length 15: console.log( 16: "%s: %d.", 17: response.request.uri.href, 18: body.length); 19: } 20: else { 21: // log error 22: console.log(error); 23: } 24: }); 25: } 26: 27: // finished 28: console.log("Finished"); 29: }; 30:  31: // execute the main function 32: main(); Let’s execute this application. (I made them in multi-lines for better reading.) 1: node fetch.js 2: "http://www.igt.com/us-en.aspx" 3: "http://www.igt.com/us-en/games.aspx" 4: "http://www.igt.com/us-en/cabinets.aspx" 5: "http://www.igt.com/us-en/systems.aspx" 6: "http://www.igt.com/us-en/interactive.aspx" 7: "http://www.igt.com/us-en/social-gaming.aspx" 8: "http://www.igt.com/support.aspx" Below is the output. As you can see the finish message was printed at the beginning, and the pages’ length retrieved in a different order than we specified. This is because in this code the request command, console logging command are executed asynchronously and concurrently. Now let’s introduce “Wind” to make them executed in order, which means it will request the websites one by one, and print the message at the end.   First of all we need to import the “Wind” package and make sure the there’s only one global variant named “Wind”, and ensure it’s “Wind” instead of “wind”. 1: var Wind = require("wind");   Next, we need to tell “Wind” which code will be executed asynchronously so that “Wind” can control the execution process. In this case the “request” operation executed asynchronously so we will create a “Task” by using a build-in helps function in “Wind” named Wind.Async.Task.create. 1: var requestBodyLengthAsync = function(url) { 2: return Wind.Async.Task.create(function(t) { 3: request(url, function(error, response, body) { 4: if(error || response.statusCode != 200) { 5: t.complete("failure", error); 6: } 7: else { 8: var data = 9: { 10: uri: response.request.uri.href, 11: length: body.length 12: }; 13: t.complete("success", data); 14: } 15: }); 16: }); 17: }; The code above created a “Task” from the original request calling code. In “Wind” a “Task” means an operation will be finished in some time in the future. A “Task” can be started by invoke its start() method, but no one knows when it actually will be finished. The Wind.Async.Task.create helped us to create a task. The only parameter is a function where we can put the actual operation in, and then notify the task object it’s finished successfully or failed by using the complete() method. In the code above I invoked the request method. If it retrieved the response successfully I set the status of this task as “success” with the URL and body length. If it failed I set this task as “failure” and pass the error out.   Next, we will change the main() function. In “Wind” if we want a function can be controlled by Wind we need to mark it as “async”. This should be done by using the code below. 1: var main = eval(Wind.compile("async", function() { 2: })); When the application is running, Wind will detect “eval(Wind.compile(“async”, function” and generate an anonymous code from the body of this original function. Then the application will run the anonymous code instead of the original one. In our example the main function will be like this. 1: var main = eval(Wind.compile("async", function() { 2: for(var i = 0; i < args.length; i++) { 3: try 4: { 5: var result = $await(requestBodyLengthAsync(args[i])); 6: console.log( 7: "%s: %d.", 8: result.uri, 9: result.length); 10: } 11: catch (ex) { 12: console.log(ex); 13: } 14: } 15: 16: console.log("Finished"); 17: })); As you can see, when I tried to request the URL I use a new command named “$await”. It tells Wind, the operation next to $await will be executed asynchronously, and the main thread should be paused until it finished (or failed). So in this case, my application will be pause when the first response was received, and then print its body length, then try the next one. At the end, print the finish message.   Finally, execute the main function. The full code would be like this. 1: var request = require("request"); 2: var Wind = require("wind"); 3:  4: var args = process.argv.splice(2); 5:  6: var requestBodyLengthAsync = function(url) { 7: return Wind.Async.Task.create(function(t) { 8: request(url, function(error, response, body) { 9: if(error || response.statusCode != 200) { 10: t.complete("failure", error); 11: } 12: else { 13: var data = 14: { 15: uri: response.request.uri.href, 16: length: body.length 17: }; 18: t.complete("success", data); 19: } 20: }); 21: }); 22: }; 23:  24: var main = eval(Wind.compile("async", function() { 25: for(var i = 0; i < args.length; i++) { 26: try 27: { 28: var result = $await(requestBodyLengthAsync(args[i])); 29: console.log( 30: "%s: %d.", 31: result.uri, 32: result.length); 33: } 34: catch (ex) { 35: console.log(ex); 36: } 37: } 38: 39: console.log("Finished"); 40: })); 41:  42: main().start();   Run our new application. At the beginning we will see the compiled and generated code by Wind. Then we can see the pages were requested one by one, and at the end the finish message was printed. Below is the code Wind generated for us. As you can see the original code, the output code were shown. 1: // Original: 2: function () { 3: for(var i = 0; i < args.length; i++) { 4: try 5: { 6: var result = $await(requestBodyLengthAsync(args[i])); 7: console.log( 8: "%s: %d.", 9: result.uri, 10: result.length); 11: } 12: catch (ex) { 13: console.log(ex); 14: } 15: } 16: 17: console.log("Finished"); 18: } 19:  20: // Compiled: 21: /* async << function () { */ (function () { 22: var _builder_$0 = Wind.builders["async"]; 23: return _builder_$0.Start(this, 24: _builder_$0.Combine( 25: _builder_$0.Delay(function () { 26: /* var i = 0; */ var i = 0; 27: /* for ( */ return _builder_$0.For(function () { 28: /* ; i < args.length */ return i < args.length; 29: }, function () { 30: /* ; i ++) { */ i ++; 31: }, 32: /* try { */ _builder_$0.Try( 33: _builder_$0.Delay(function () { 34: /* var result = $await(requestBodyLengthAsync(args[i])); */ return _builder_$0.Bind(requestBodyLengthAsync(args[i]), function (result) { 35: /* console.log("%s: %d.", result.uri, result.length); */ console.log("%s: %d.", result.uri, result.length); 36: return _builder_$0.Normal(); 37: }); 38: }), 39: /* } catch (ex) { */ function (ex) { 40: /* console.log(ex); */ console.log(ex); 41: return _builder_$0.Normal(); 42: /* } */ }, 43: null 44: ) 45: /* } */ ); 46: }), 47: _builder_$0.Delay(function () { 48: /* console.log("Finished"); */ console.log("Finished"); 49: return _builder_$0.Normal(); 50: }) 51: ) 52: ); 53: /* } */ })   How Wind Works Someone may raise a big concern when you find I utilized “eval” in my code. Someone may assume that Wind utilizes “eval” to execute some code dynamically while “eval” is very low performance. But I would say, Wind does NOT use “eval” to run the code. It only use “eval” as a flag to know which code should be compiled at runtime. When the code was firstly been executed, Wind will check and find “eval(Wind.compile(“async”, function”. So that it knows this function should be compiled. Then it utilized parse-js to analyze the inner JavaScript and generated the anonymous code in memory. Then it rewrite the original code so that when the application was running it will use the anonymous one instead of the original one. Since the code generation was done at the beginning of the application was started, in the future no matter how long our application runs and how many times the async function was invoked, it will use the generated code, no need to generate again. So there’s no significant performance hurt when using Wind.   Wind in My Previous Demo Let’s adopt Wind into one of my previous demonstration and to see how it helps us to make our code simple, straightforward and easy to read and understand. In this post when I implemented the functionality that copied the records from my WASD to table storage, the logic would be like this. 1, Open database connection. 2, Execute a query to select all records from the table. 3, Recreate the table in Windows Azure table storage. 4, Create entities from each of the records retrieved previously, and then insert them into table storage. 5, Finally, show message as the HTTP response. But as the image below, since there are so many callbacks and async operations, it’s very hard to understand my logic from the code. Now let’s use Wind to rewrite our code. First of all, of course, we need the Wind package. Then we need to include the package files into project and mark them as “Copy always”. Add the Wind package into the source code. Pay attention to the variant name, you must use “Wind” instead of “wind”. 1: var express = require("express"); 2: var async = require("async"); 3: var sql = require("node-sqlserver"); 4: var azure = require("azure"); 5: var Wind = require("wind"); Now we need to create some async functions by using Wind. All async functions should be wrapped so that it can be controlled by Wind which are open database, retrieve records, recreate table (delete and create) and insert entity in table. Below are these new functions. All of them are created by using Wind.Async.Task.create. 1: sql.openAsync = function (connectionString) { 2: return Wind.Async.Task.create(function (t) { 3: sql.open(connectionString, function (error, conn) { 4: if (error) { 5: t.complete("failure", error); 6: } 7: else { 8: t.complete("success", conn); 9: } 10: }); 11: }); 12: }; 13:  14: sql.queryAsync = function (conn, query) { 15: return Wind.Async.Task.create(function (t) { 16: conn.queryRaw(query, function (error, results) { 17: if (error) { 18: t.complete("failure", error); 19: } 20: else { 21: t.complete("success", results); 22: } 23: }); 24: }); 25: }; 26:  27: azure.recreateTableAsync = function (tableName) { 28: return Wind.Async.Task.create(function (t) { 29: client.deleteTable(tableName, function (error, successful, response) { 30: console.log("delete table finished"); 31: client.createTableIfNotExists(tableName, function (error, successful, response) { 32: console.log("create table finished"); 33: if (error) { 34: t.complete("failure", error); 35: } 36: else { 37: t.complete("success", null); 38: } 39: }); 40: }); 41: }); 42: }; 43:  44: azure.insertEntityAsync = function (tableName, entity) { 45: return Wind.Async.Task.create(function (t) { 46: client.insertEntity(tableName, entity, function (error, entity, response) { 47: if (error) { 48: t.complete("failure", error); 49: } 50: else { 51: t.complete("success", null); 52: } 53: }); 54: }); 55: }; Then in order to use these functions we will create a new function which contains all steps for data copying. 1: var copyRecords = eval(Wind.compile("async", function (req, res) { 2: try { 3: } 4: catch (ex) { 5: console.log(ex); 6: res.send(500, "Internal error."); 7: } 8: })); Let’s execute steps one by one with the “$await” keyword introduced by Wind so that it will be invoked in sequence. First is to open the database connection. 1: var copyRecords = eval(Wind.compile("async", function (req, res) { 2: try { 3: // connect to the windows azure sql database 4: var conn = $await(sql.openAsync(connectionString)); 5: console.log("connection opened"); 6: } 7: catch (ex) { 8: console.log(ex); 9: res.send(500, "Internal error."); 10: } 11: })); Then retrieve all records from the database connection. 1: var copyRecords = eval(Wind.compile("async", function (req, res) { 2: try { 3: // connect to the windows azure sql database 4: var conn = $await(sql.openAsync(connectionString)); 5: console.log("connection opened"); 6: // retrieve all records from database 7: var results = $await(sql.queryAsync(conn, "SELECT * FROM [Resource]")); 8: console.log("records selected. count = %d", results.rows.length); 9: } 10: catch (ex) { 11: console.log(ex); 12: res.send(500, "Internal error."); 13: } 14: })); After recreated the table, we need to create the entities and insert them into table storage. 1: var copyRecords = eval(Wind.compile("async", function (req, res) { 2: try { 3: // connect to the windows azure sql database 4: var conn = $await(sql.openAsync(connectionString)); 5: console.log("connection opened"); 6: // retrieve all records from database 7: var results = $await(sql.queryAsync(conn, "SELECT * FROM [Resource]")); 8: console.log("records selected. count = %d", results.rows.length); 9: if (results.rows.length > 0) { 10: // recreate the table 11: $await(azure.recreateTableAsync(tableName)); 12: console.log("table created"); 13: // insert records in table storage one by one 14: for (var i = 0; i < results.rows.length; i++) { 15: var entity = { 16: "PartitionKey": results.rows[i][1], 17: "RowKey": results.rows[i][0], 18: "Value": results.rows[i][2] 19: }; 20: $await(azure.insertEntityAsync(tableName, entity)); 21: console.log("entity inserted"); 22: } 23: } 24: } 25: catch (ex) { 26: console.log(ex); 27: res.send(500, "Internal error."); 28: } 29: })); Finally, send response back to the browser. 1: var copyRecords = eval(Wind.compile("async", function (req, res) { 2: try { 3: // connect to the windows azure sql database 4: var conn = $await(sql.openAsync(connectionString)); 5: console.log("connection opened"); 6: // retrieve all records from database 7: var results = $await(sql.queryAsync(conn, "SELECT * FROM [Resource]")); 8: console.log("records selected. count = %d", results.rows.length); 9: if (results.rows.length > 0) { 10: // recreate the table 11: $await(azure.recreateTableAsync(tableName)); 12: console.log("table created"); 13: // insert records in table storage one by one 14: for (var i = 0; i < results.rows.length; i++) { 15: var entity = { 16: "PartitionKey": results.rows[i][1], 17: "RowKey": results.rows[i][0], 18: "Value": results.rows[i][2] 19: }; 20: $await(azure.insertEntityAsync(tableName, entity)); 21: console.log("entity inserted"); 22: } 23: // send response 24: console.log("all done"); 25: res.send(200, "All done!"); 26: } 27: } 28: catch (ex) { 29: console.log(ex); 30: res.send(500, "Internal error."); 31: } 32: })); If we compared with the previous code we will find now it became more readable and much easy to understand. It’s very easy to know what this function does even though without any comments. When user go to URL “/was/copyRecords” we will execute the function above. The code would be like this. 1: app.get("/was/copyRecords", function (req, res) { 2: copyRecords(req, res).start(); 3: }); And below is the logs printed in local compute emulator console. As we can see the functions executed one by one and then finally the response back to me browser.   Scaffold Functions in Wind Wind provides not only the async flow control and compile functions, but many scaffold methods as well. We can build our async code more easily by using them. I’m going to introduce some basic scaffold functions here. In the code above I created some functions which wrapped from the original async function such as open database, create table, etc.. All of them are very similar, created a task by using Wind.Async.Task.create, return error or result object through Task.complete function. In fact, Wind provides some functions for us to create task object from the original async functions. If the original async function only has a callback parameter, we can use Wind.Async.Binding.fromCallback method to get the task object directly. For example the code below returned the task object which wrapped the file exist check function. 1: var Wind = require("wind"); 2: var fs = require("fs"); 3:  4: fs.existsAsync = Wind.Async.Binding.fromCallback(fs.exists); In Node.js a very popular async function pattern is that, the first parameter in the callback function represent the error object, and the other parameters is the return values. In this case we can use another build-in function in Wind named Wind.Async.Binding.fromStandard. For example, the open database function can be created from the code below. 1: sql.openAsync = Wind.Async.Binding.fromStandard(sql.open); 2:  3: /* 4: sql.openAsync = function (connectionString) { 5: return Wind.Async.Task.create(function (t) { 6: sql.open(connectionString, function (error, conn) { 7: if (error) { 8: t.complete("failure", error); 9: } 10: else { 11: t.complete("success", conn); 12: } 13: }); 14: }); 15: }; 16: */ When I was testing the scaffold functions under Wind.Async.Binding I found for some functions, such as the Azure SDK insert entity function, cannot be processed correctly. So I personally suggest writing the wrapped method manually.   Another scaffold method in Wind is the parallel tasks coordination. In this example, the steps of open database, retrieve records and recreated table should be invoked one by one, but it can be executed in parallel when copying data from database to table storage. In Wind there’s a scaffold function named Task.whenAll which can be used here. Task.whenAll accepts a list of tasks and creates a new task. It will be returned only when all tasks had been completed, or any errors occurred. For example in the code below I used the Task.whenAll to make all copy operation executed at the same time. 1: var copyRecordsInParallel = eval(Wind.compile("async", function (req, res) { 2: try { 3: // connect to the windows azure sql database 4: var conn = $await(sql.openAsync(connectionString)); 5: console.log("connection opened"); 6: // retrieve all records from database 7: var results = $await(sql.queryAsync(conn, "SELECT * FROM [Resource]")); 8: console.log("records selected. count = %d", results.rows.length); 9: if (results.rows.length > 0) { 10: // recreate the table 11: $await(azure.recreateTableAsync(tableName)); 12: console.log("table created"); 13: // insert records in table storage in parallal 14: var tasks = new Array(results.rows.length); 15: for (var i = 0; i < results.rows.length; i++) { 16: var entity = { 17: "PartitionKey": results.rows[i][1], 18: "RowKey": results.rows[i][0], 19: "Value": results.rows[i][2] 20: }; 21: tasks[i] = azure.insertEntityAsync(tableName, entity); 22: } 23: $await(Wind.Async.Task.whenAll(tasks)); 24: // send response 25: console.log("all done"); 26: res.send(200, "All done!"); 27: } 28: } 29: catch (ex) { 30: console.log(ex); 31: res.send(500, "Internal error."); 32: } 33: })); 34:  35: app.get("/was/copyRecordsInParallel", function (req, res) { 36: copyRecordsInParallel(req, res).start(); 37: });   Besides the task creation and coordination, Wind supports the cancellation solution so that we can send the cancellation signal to the tasks. It also includes exception solution which means any exceptions will be reported to the caller function.   Summary In this post I introduced a Node.js module named Wind, which created by my friend Jeff Zhao. As you can see, different from other async library and framework, adopted the idea from F# and C#, Wind utilizes runtime code generation technology to make it more easily to write async, callback-based functions in a sync-style way. By using Wind there will be almost no callback, and the code will be very easy to understand. Currently Wind is still under developed and improved. There might be some problems but the author, Jeff, should be very happy and enthusiastic to learn your problems, feedback, suggestion and comments. You can contact Jeff by - Email: [email protected] - Group: https://groups.google.com/d/forum/windjs - GitHub: https://github.com/JeffreyZhao/wind/issues   Source code can be download here.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• timetable in a jTable

  - by chandra

  I want to create a timetable in a jTable. For the top row it will display from monday to sunday and the left colume will display the time of the day with 2h interval e.g 1st colume (0000 - 0200), 2nd colume (0200 - 0400) .... And if i click a button the timing will change from 2h interval to 1h interval. I do not want to hardcode it because i need to do for 2h, 1h, 30min , 15min, 1min, 30sec and 1 sec interval and it will take too long for me to hardcode. Can anyone show me an example or help me create an example for the 2h to 1h interval so that i know what to do? The data array is for me to store data and are there any other easier or shortcuts for me to store them because if it is in 1 sec interval i got thousands of array i need to type it out. private void oneHour() //1 interval functions { if(!once) { initialize(); once = true; } jTable.setModel(new javax.swing.table.DefaultTableModel( new Object [][] { {"0000 - 0100", data[0][0], data[0][1], data[0][2], data[0][3], data[0][4], data[0][5], data[0][6]}, {"0100 - 0200", data[2][0], data[2][1], data[2][2], data[2][3], data[2][4], data[2][5], data[2][6]}, {"0200 - 0300", data[4][0], data[4][1], data[4][2], data[4][3], data[4][4], data[4][5], data[4][6]}, {"0300 - 0400", data[6][0], data[6][1], data[6][2], data[6][3], data[6][4], data[6][5], data[6][6]}, {"0400 - 0600", data[8][0], data[8][1], data[8][2], data[8][3], data[8][4], data[8][5], data[8][6]}, {"0600 - 0700", data[10][0], data[4][1], data[10][2], data[10][3], data[10][4], data[10][5], data[10][6]}, {"0700 - 0800", data[12][0], data[12][1], data[12][2], data[12][3], data[12][4], data[12][5], data[12][6]}, {"0800 - 0900", data[14][0], data[14][1], data[14][2], data[14][3], data[14][4], data[14][5], data[14][6]}, {"0900 - 1000", data[16][0], data[16][1], data[16][2], data[16][3], data[16][4], data[16][5], data[16][6]}, {"1000 - 1100", data[18][0], data[18][1], data[18][2], data[18][3], data[18][4], data[18][5], data[18][6]}, {"1100 - 1200", data[20][0], data[20][1], data[20][2], data[20][3], data[20][4], data[20][5], data[20][6]}, {"1200 - 1300", data[22][0], data[22][1], data[22][2], data[22][3], data[22][4], data[22][5], data[22][6]}, {"1300 - 1400", data[24][0], data[24][1], data[24][2], data[24][3], data[24][4], data[24][5], data[24][6]}, {"1400 - 1500", data[26][0], data[26][1], data[26][2], data[26][3], data[26][4], data[26][5], data[26][6]}, {"1500 - 1600", data[28][0], data[28][1], data[28][2], data[28][3], data[28][4], data[28][5], data[28][6]}, {"1600 - 1700", data[30][0], data[30][1], data[30][2], data[30][3], data[30][4], data[30][5], data[30][6]}, {"1700 - 1800", data[32][0], data[32][1], data[32][2], data[32][3], data[32][4], data[32][5], data[32][6]}, {"1800 - 1900", data[34][0], data[34][1], data[34][2], data[34][3], data[34][4], data[34][5], data[34][6]}, {"1900 - 2000", data[36][0], data[36][1], data[36][2], data[36][3], data[36][4], data[36][5], data[36][6]}, {"2000 - 2100", data[38][0], data[38][1], data[38][2], data[38][3], data[38][4], data[38][5], data[38][6]}, {"2100 - 2200", data[40][0], data[40][1], data[40][2], data[40][3], data[40][4], data[40][5], data[40][6]}, {"2200 - 2300", data[42][0], data[42][1], data[42][2], data[42][3], data[42][4], data[42][5], data[42][6]}, {"2300 - 2400", data[44][0], data[44][1], data[44][2], data[44][3], data[44][4], data[44][5], data[44][6]}, {"2400 - 0000", data[46][0], data[46][1], data[46][2], data[46][3], data[46][4], data[46][5], data[46][6]}, }, new String [] { "Time/Day", "(Mon)", "(Tue)", "(Wed)", "(Thurs)", "(Fri)", "(Sat)", "(Sun)" } )); } private void twoHour() //2 hour interval functions { if(!once) { initialize(); once = true; } jTable.setModel(new javax.swing.table.DefaultTableModel( new Object [][] { {"0000 - 0200", data[0][0], data[0][1], data[0][2], data[0][3], data[0][4], data[0][5], data[0][6]}, {"0200 - 0400", data[4][0], data[4][1], data[4][2], data[4][3], data[4][4], data[4][5], data[4][6]}, {"0400 - 0600", data[8][0], data[8][1], data[8][2], data[8][3], data[8][4], data[8][5], data[8][6]}, {"0600 - 0800", data[12][0], data[12][1], data[12][2], data[12][3], data[12][4], data[12][5], data[12][6]}, {"0800 - 1000", data[16][0], data[16][1], data[16][2], data[16][3], data[16][4], data[16][5], data[16][6]}, {"1000 - 1200", data[20][0], data[20][1], data[20][2], data[20][3], data[20][4], data[20][5], data[20][6]}, {"1200 - 1400", data[24][0], data[24][1], data[24][2], data[24][3], data[24][4], data[24][5], data[24][6]}, {"1400 - 1600", data[28][0], data[28][1], data[28][2], data[28][3], data[28][4], data[28][5], data[28][6]}, {"1600 - 1800", data[32][0], data[32][1], data[32][2], data[32][3], data[32][4], data[32][5], data[32][6]}, {"1800 - 2000", data[36][0], data[36][1], data[36][2], data[36][3], data[36][4], data[36][5], data[36][6]}, {"2000 - 2200", data[40][0], data[40][1], data[40][2], data[40][3], data[40][4], data[40][5], data[40][6]}, {"2200 - 2400",data[44][0], data[44][1], data[44][2], data[44][3], data[44][4], data[44][5], data[44][6]} },

  Read the article

• Help needed to write a LINQ with GROUP bY(C#3.0)

  - by Newbie

  I have a datatable whose structure is as under Week Dates Key_Factors Factor_Values --- ----- ----------- ------------- 1 29/12/2000 Factor_1 19.20 1 29/12/2000 Factor_2 20.67 1 29/12/2000 Factor_3 10 2 21/12/2007 Factor_1 20.54 2 21/12/2007 Factor_4 21.70 I have a Object model like WeekNumber(int) Dates(Datetime) FactorDictionary (Dictionary<string,double>) I am trying to populate the data from DataTable to my Object Model whose needed output is as under Desired Output ---------------- WeekNumber : 1 Dates : 29/12/2000 FactorDictionary: Key_Factors: Factor_1 Factor_Values:19.20 Key_Factors: Factor_2 Factor_Values:20.67 Key_Factors: Factor_3 Factor_Values:10 WeekNumber : 2 Dates : 21/12/2007 FactorDictionary: Key_Factors: Factor_1 Factor_Values:20.54 Key_Factors: Factor_4 Factor_Values:21.70 i.e. The result is grouped by weeks. Can I achieve the same by using LINQ. I am using C#(3.0) with framework(3.5) Thanks

  Read the article

• SOA Implementation Challenges

  Why do companies think that if they put up a web service that they are doing Service-Oriented Architecture (SOA)? Unfortunately, the IT and business world love to run on the latest hype or buzz words of which very few even understand the meaning. One of the largest issues companies have today as they consider going down the path of SOA, is the lack of knowledge regarding the architectural style and the over usage of the term SOA. So how do we solve this issue?I am sure most of you are thinking by now that you know what SOA is because you developed a few web services.  Isn’t that SOA, right? No, that is not SOA, but instead Just Another Web Service (JAWS). For us to better understand what SOA is let’s look at a few definitions.Douglas K. Bary defines service-oriented architecture as a collection of services. These services are enabled to communicate with each other in order to pass data or coordinating some activity with other services.If you look at this definition closely you will notice that Bary states that services communicate with each other. Let us compare this statement with my first statement regarding companies that claim to be doing SOA when they have just a collection of web services. In order for these web services to for an SOA application they need to be interdependent on one another forming some sort of architectural hierarchy. Just because a company has a few web services does not mean that they are all interconnected.SearchSOA from TechTarget.com states that SOA defines how two computing entities work collectively to enable one entity to perform a unit of work on behalf of another. Once again, just because a company has a few web services does not guarantee that they are even working together let alone if they are performing work for each other.SearchSOA also points out service interactions should be self-contained and loosely-coupled so that all interactions operate independent of each other.Of all the definitions regarding SOA Thomas Erl’s seems to shed the most light on this concept. He states that “SOA establishes an architectural model that aims to enhance the efficiency, agility, and productivity of an enterprise by positioning services as the primary means through which solution logic is represented in support of the realization of the strategic goals associated with service-oriented computing.” (Erl, 2011) Once again this definition proves that a collection of web services does not mean that a company is doing SOA. However, it does mean that a company has a collection of web services, and that is it.In order for a company to start to go down the path of SOA, they must take  a hard look at their existing business process while abstracting away any technology so that they can define what is they really want to accomplish. Once a company has done this, they can begin to factor out common sub business process like credit card process, user authentication or system notifications in to small components that can be built independent of each other and then reassembled to form new and dynamic services that are loosely coupled and agile in that they can change as a business grows.Another key pitfall of companies doing SOA is the fact that they let vendors drive their architecture. Why do companies do this? Vendors’ do not hold your company’s success as their top priority; in fact they hold their own success as their top priority by selling you as much stuff as you are willing to buy. In my experience companies tend to strive for the maximum amount of benefits with a minimal amount of cost. Does anyone else see any conflicts between this and the driving force behind vendors.Mike Kavis recommends in an article written in CIO.com that companies need to figure out what they need before they talk to a vendor or at least have some idea of what they need. It is important to thoroughly evaluate each vendor and watch them perform a live demo of their system so that you as the company fully understand what kind of product or service the vendor is actually offering. In addition, do research on each vendor that you are considering, check out blog posts, online reviews, and any information you can find on the vendor through various search engines.Finally he recommends companies to verify any recommendations supplied by a vendor. From personal experience this is very important. I can remember when the company I worked for purchased a $200,000 add-on to their phone system that never actually worked as it was intended. In fact, just after my departure from the company started the process of attempting to get their money back from the vendor. This potentially could have been avoided if the company had done the research before selecting this vendor to ensure that their product and vendor would live up to their claims. I know that some SOA vendor offer free training regarding SOA because they know that there are a lot of misconceptions about the topic. Superficially this is a great thing for companies to take part in especially if the company is starting to implement SOA architecture and are still unsure about some topics or are looking for some guidance regarding the topic. However beware that some companies will focus on their product line only regarding the training. As an example, InfoWorld.com claims that companies providing deep seminars disguised as training, focusing more about ESBs and SOA governance technology, and less on how to approach and solve the architectural issues of the attendees.In short, it is important to remember that we as software professionals are responsible for guiding a business’s technology sections should be well informed and fully understand any new concepts that may be considered for implementation. As I have demonstrated already a company that has a few web services does not mean that they are doing SOA.  Additionally, we must not let the new buzz word of the day drive our technology, but instead our technology decisions should be driven from research and proven experience. Finally, it is important to rely on vendors when necessary, however, always take what they say with a grain of salt while cross checking any claims that they may make because we have to live with the aftermath of a system after the vendors are gone.   References: Barry, D. K. (2011). Service-oriented architecture (SOA) definition. Retrieved 12 12, 2011, from Service-Architecture.com: http://www.service-architecture.com/web-services/articles/service-oriented_architecture_soa_definition.html Connell, B. (2003, 9). service-oriented architecture (SOA). Retrieved 12 12, 2011, from SearchSOA: http://searchsoa.techtarget.com/definition/service-oriented-architecture Erl, T. (2011, 12 12). Service-Oriented Architecture. Retrieved 12 12, 2011, from WhatIsSOA: http://www.whatissoa.com/p10.php InfoWorld. (2008, 6 1). Should you get your SOA knowledge from SOA vendors? . Retrieved 12 12, 2011, from InfoWorld.com: http://www.infoworld.com/d/architecture/should-you-get-your-soa-knowledge-soa-vendors-453 Kavis, M. (2008, 6 18). Top 10 Reasons Why People are Making SOA Fail. Retrieved 12 13, 2011, from CIO.com: http://www.cio.com/article/438413/Top_10_Reasons_Why_People_are_Making_SOA_Fail?page=5&taxonomyId=3016  

  Read the article

• March 21 EBS Webcast: A Functional and Technical Overview of Batch Layer Costing When Using Actual Costing

  - by Oracle_EBS

  ADVISOR WEBCAST: A Functional and Technical Overview of Batch Layer Costing When Using Actual CostingPRODUCT FAMILY: Process Manufacturing - EBS March 21, 2012 at 11 am ET, 9 am MT, 8 am PT This one-hour session is recommended for technical and functional users who use Actual Costing in OPM Financials. You will gain a better understanding of why layer costing was introduced, how it works, what benefits it provides, and how to get the the most out of this functionality.TOPICS WILL INCLUDE: Explain why Batch Layer Costing when using Actual Costing was introduced How this functionality works What benefits provided with Batch Layer Costing when using Actual Costing Tips to make this functionality work as desired Technical overview A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Current Schedule can be found on Note 740966.1 Post Presentation Recordings can be found on Note 740964.1

  Read the article

• Unable to make admin interface connection to server when moving a mailbox.

  - by TheCodeMonk

  I have an existing Exchange 2003 server running on Windows Server 2003. I am in the process of replacing our current server infrastructure and virtualizing it all in Hyper-V. I have Essential Business Server 2008 installed in 3 separate VMs and running. Everything seems to be working fine so far. I am now trying to migrate my exchange mailboxes over to the new exchange server in the messaging server and every time I try I get this error: MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227) I have done some searching and found solutions like adding the computer to the exchange domain servers groups and install group, also making sure the user logged into the new server is in the proper groups. I also saw a solution in making sure that any unused NICs are disabled. I've tried all that to no avail.

  Read the article

• Why do I get xfs_freeze "Operation not supported" error with ec2-consistent-snapshot? Debian Squeeze w/ext4 filesystem

  - by Michael Endsley

  I'm running the following command: [root@somehost ~]# ec2-consistent-snapshot --aws-credentials-file '/some/dir/file' --mysql --mysql-socket '/var/run/mysqld/mysql.sock' --mysql-username 'backup' --mysql-password 'password' --freeze-filesystem '/dev/xvda1' vol-xxxxxx It returns this error: xfs_freeze: cannot freeze filesystem at /dev/xvda1: Operation not supported ec2-consistent-snapshot: ERROR: xfs_freeze -f /dev/xvda1: failed(256) snap-eeb66393 xfs_freeze: cannot unfreeze filesystem mounted at /dev/xvda1: Invalid argument ec2-consistent-snapshot: ERROR: xfs_freeze -u /dev/xvda1: failed(256) This is being run on Debian Squeeze with the ext4 Linux filesystem. Can anyone explain this error to me, or what might be its cause? When googling, I found information about it needing to be executed with sudo, but I'm performing the entire operation as root. I also found some posts about trying to run it after a CentOS upgrade using yum, but the situation appeared dissimilar. It's difficult to find things referring to this situation exactly. xfs_freeze is available for use on the filesystem. Is it possible that the filesystem, despite being ext4, somehow doesn't support freezing? Sorry if I've missed some bit of StackExchange etiquette with this post -- it's my first venture here!

  Read the article

• LFD always stops working after ~30 days, until I give /etc/csf/csf.pl -r

  - by gus

  When I give /etc/csf/csf.pl -r , I see lots of lines flushing, then I begin to get the notification emails again, (several emails per day), for example: Time: Wed Sep 12 08:39:47 2012 +0800 IP: 221.13.104.162 (CN/China/-) Failures: 5 (sshd) Interval: 300 seconds Blocked: Permanent Block Log entries: Sep 12 08:39:25 MyHost sshd[9677]: Failed password for root from 221.13.104.162 port 51106 ssh2 Sep 12 08:39:28 MyHost sshd[9712]: Failed password for root from 221.13.104.162 port 51690 ssh2 Sep 12 08:39:32 MyHost sshd[9739]: Failed password for root from 221.13.104.162 port 52128 ssh2 Sep 12 08:39:36 MyHost sshd[9778]: Failed password for root from 221.13.104.162 port 52670 ssh2 Sep 12 08:39:40 MyHost sshd[9821]: Failed password for root from 221.13.104.162 port 53155 ssh2 And then after about 30 days, the emails stop coming, it is as if something has filled up, and requires flushing again. I don't know much about CSF/LFD, but I would have imagined that this would work in a FIFO manner, so it should be able to run indefinitely within finite space. My /etc/csf/version.txt says 4.83 My cat /proc/version says Linux version 2.6.18-028stab066.8 (root@rhel5-64-build) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Fri Nov 27 20:19:25 MSK 2009

  Read the article

• Scientific Linux - mysql and apachefail to start on reboot

  - by Derek Deed

  Both mysqld and httpd fail to restart following a reboot of the server, although chkconfig --list shows both daemons set to on for run levels 2,3,4 & 5 All control is being exectuted via Webmin Reboot server – MySQl and Apache not running MySQL Database Server MySQL version 5.1.69 MySQL is not running on your system - database list could not be retrieved. Click this button to start the MySQL database server on your system with the command /etc/rc.d/init.d/mysqld start. This Webmin module cannot administer the database until it is started. Apache Webserver Apache version 2.2.15 Start Apache Search Docs.. Global configuration Existing virtual hosts Create virtual host Select all. | Invert selection. Default Server Defines the default settings for all other virtual servers, and processes any unhandled requests. Address Any Port Any Server Name Automatic Document Root /var/www/drupal Virtual Server Processes all requests on port 443 not handled by other virtual servers. Address Any Port 443 Server Name Automatic Document Root /var/www/drupal Select all. | Invert selection. chkconfig --list mysqld mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off chkconfig --list httpd httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off Manually Restart Apache chkconfig --list httpd httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off Manually Restart MySQL chkconfig --list mysqld mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off Everything now running okay; but no difference in the chkconfig outputs above. Set chkconfig --levels 235 httpd on /etc/init.d/httpd start The same for mysqld but no change in operation. Log files show that the shutdown has been completed successfully; but there is no indication of the service restarting until it is executed manually: 131112 13:59:15 InnoDB: Starting shutdown... 131112 13:59:16 InnoDB: Shutdown completed; log sequence number 0 881747021 131112 13:59:16 [Note] /usr/libexec/mysqld: Shutdown complete 131112 13:59:16 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended 131112 14:09:52 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 131112 14:09:52 InnoDB: Initializing buffer pool, size = 8.0M 131112 14:09:52 InnoDB: Completed initialization of buffer pool [Tue Nov 12 13:59:13 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Tue Nov 12 13:59:13 2013] [notice] Digest: generating secret for digest authentication ... [Tue Nov 12 13:59:13 2013] [notice] Digest: done [Tue Nov 12 13:59:14 2013] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations [Tue Nov 12 13:59:14 2013] [notice] caught SIGTERM, shutting down [Tue Nov 12 14:27:13 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Tue Nov 12 14:27:13 2013] [notice] Digest: generating secret for digest authentication ... [Tue Nov 12 14:27:13 2013] [notice] Digest: done [Tue Nov 12 14:27:13 2013] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations Is anyone able to shed any light on this problem, Cheers, Derek.

  Read the article

• “Disk /dev/xvda1 doesn't contain a valid partition table”

  - by Simpanoz

  Iam newbie to EC2 and Ubuntu 11 (EC2 Free tier Ubuntu). I have made following commands. sudo mkfs -t ext4 /dev/xvdf6 sudo mkdir /db sudo vim /etc/fstab /dev/xvdf6 /db ext4 noatime,noexec,nodiratime 0 0 sudo mount /dev/xvdf6 /db fdisk -l I got following output. Can some one guide me what I am doing wrong and how it can be rectified. Disk /dev/xvda1: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders, total 16777216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table Disk /dev/xvdf6: 6442 MB, 6442450944 bytes 255 heads, 63 sectors/track, 783 cylinders, total 12582912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvdf6 doesn't contain a valid partition table.

  Read the article

• Unicast traffic between hosts on a switch leaving the switch by its uplink. Why?

  - by Rich Lafferty

  I have a weird thing happening on our network at my office which I can't quite get my head around. In particular I can't tell if it's a problem with a switch, or a problem with configuration. We have a Cisco SG300-52 switch (sw01) in the top of a rack in our server room, connected to another SG300-28 that acts as our core switch (core01). Both run layer 2 only, our firewalls do routing between VLANs. They have a dozen or so VLANs between them. Gi1 on sw01 is a trunk port connected to gi1 on core01. (Disclosure: There are other switches in our environment but I'm pretty sure I've isolated the problem down to these two. Happy to provide more info if necessary.) The behaviour I'm seeing is limited to one VLAN, vlan 12 -- or, at least, it's not happening on the other ones I checked (It's hard to guarantee the absence of packets), and it is: sw01 is forwarding, to core01, traffic which is between two hosts which are both plugged into sw01. (I noticed this because the IDS in our firewall gave a false positive on traffic which should not reach the firewall.) We noticed this mostly between our two dhcp/dns servers, net01 (10.12.0.10) and net02 (10.12.0.11). net01 is physical hardware and net02 is on a VMware ESX server. net01 is connected to gi44 on sw01 and net02's ESX server to gi11. [net01]----gi44-[sw01]-gi1----gi1-[core01] [net02]----gi11/ Let's see some interfaces! Remember, vlan 12 is the problem vlan. Of the others I explicitly verified that vlan 27 was not affected. Here's the two hosts' ports: esx01 contains net02. sw01#sh run int gi11 interface gigabitethernet11 description esx01 lldp med disable switchport trunk allowed vlan add 5-7,11-13,100 switchport trunk native vlan 27 ! sw01#sh run int gi44 interface gigabitethernet44 description net01-1 lldp med disable switchport mode access switchport access vlan 12 ! Here's the trunk on sw01. sw01#sh run int gi1 interface gigabitethernet1 description "trunk to core01" lldp med disable switchport trunk allowed vlan add 4-7,11-13,27,100 ! And the other end of the trunk on core01. interface gigabitethernet1 description sw01 macro description switch switchport trunk allowed vlan add 2-7,11-16,27,100 ! I have a monitor port on core01, thus: core01#sh run int gi12 interface gigabitethernet12 description "monitor port" port monitor GigabitEthernet 1 ! And the monitor port on core01 sees unicast traffic going between net01 and net02, both of which are on sw01! I've verified this with a monitor port on sw01 that sees the net01-net02 unicast traffic leaving via gi1 too. sw01 knows that both of those hosts are on ports that are not its trunk port: :) ratchet$ arp -a | grep net net02.2ndsiteinc.com (10.12.0.11) at 00:0C:29:1A:66:15 [ether] on eth0 net01.2ndsiteinc.com (10.12.0.10) at 00:11:43:D8:9F:94 [ether] on eth0 sw01#sh mac addr addr 00:0C:29:1A:66:15 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:0c:29:1a:66:15 gi11 dynamic sw01#sh mac addr addr 00:11:43:D8:9F:94 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:11:43:d8:9f:94 gi44 dynamic I also brought up an unused port on sw01 on vlan 12, but the unicast traffic was (as best as I could tell) not coming out that port. So it doesn't look like sw01 is pushing it out all its ports, just the right ports and also gi1! I've verified that sw01 is not filling up its address-table: sw01#sh mac addr count This may take some time. Capacity : 8192 Free : 7983 Used : 208 The full configs for both core01 and sw01 are available: core01, sw01. Finally, versions: sw01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.0.0.4 ( date 08-Apr-2010 time 16:37:57 ) HW version V01 core01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.1.0.6 ( date 11-May-2011 time 18:31:00 ) HW version V01 So my understanding is this: sw01 should take unicast traffic for net01 and send it only out net02's port, and vice versa; none of it should go out sw01's uplink. But core01, receiving traffic on gi1 for a host it knows is on gi1, is right in sending it out all of its ports. (That is: sw01 is misbehaving, but core01 is doing what it should given the circumstances.) My question is: Why is sw01 sending that unicast traffic out its uplink, gi1? (And pre-emptively: yes, I know SG300s leave much to be desired, and yes, we should have spanning-tree enabled, but that's where I'm at right now.)

  Read the article

• Using IIS7 why are my PNGs being cached by the browser, but my JS and CSS files not?

  - by Craig Shearer

  I am trying to sort out caching in IIS for my site. Basically, I want nothing cached, except for .png, .js, and .css files. At my site level, I opened the HTTP Reponse Headers and used the "Set Common Hedaers..." to set content to expire immediately. I have no Output Caching profiles set at any level in IIS. I clear my browser cache then try accessing my site. When my site requests a PNG file, I see responses like: Accept-Ranges bytes Age 0 Connection Keep-Alive Content-Type image/png Date Thu, 12 Apr 2012 21:55:15 GMT Etag "83b7322de318cd1:0" Last-Modified Thu, 12 Apr 2012 19:33:45 GMT Server Microsoft-IIS/7.5 X-Powered-By ASP.NET For JS and CSS files, I see responses like: Accept-Ranges bytes Cache-Control no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 597 Content-Type text/css Date Thu, 12 Apr 2012 21:55:15 GMT Etag "06e45ede15bca1:0" Last-Modified Mon, 02 Nov 2009 17:28:44 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET Accept-Ranges bytes Cache-Control no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 42060 Content-Type application/x-javascript Date Thu, 12 Apr 2012 21:55:14 GMT Etag "2356302de318cd1:0" Last-Modified Thu, 12 Apr 2012 19:33:45 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET So, why are my PNGs able to be cached, but JS and CSS files not? Then, I go into the Output Caching feature in IIS and set up profiles for .png, .css, and .js files. This updates the web.config file as follows: <caching> <profiles> <add extension=".png" policy="CacheUntilChange" kernelCachePolicy="DontCache" /> <add extension=".css" policy="CacheUntilChange" kernelCachePolicy="DontCache" /> <add extension=".js" policy="CacheUntilChange" kernelCachePolicy="DontCache" /> </profiles> </caching> I do a "precautionary" IISReset then try accessing my site again. For PNG files, I see the following response: Accept-Ranges bytes Age 0 Connection Keep-Alive Content-Length 3833 Content-Type image/png Date Thu, 12 Apr 2012 22:02:30 GMT Etag "0548c9e2c5dc81:0" Last-Modified Tue, 22 Jan 2008 19:26:00 GMT Server Microsoft-IIS/7.5 X-Powered-By ASP.NET For CSS and JS files, I see the following responses: Accept-Ranges bytes Cache-Control no-cache,no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 2680 Content-Type application/x-javascript Date Thu, 12 Apr 2012 22:02:29 GMT Etag "0f743af9015c81:0" Last-Modified Tue, 23 Oct 2007 16:20:54 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET Accept-Ranges bytes Cache-Control no-cache,no-cache Connection Keep-Alive Content-Encoding gzip Content-Length 3831 Content-Type text/css Date Thu, 12 Apr 2012 22:02:29 GMT Etag "c3f42d2de318cd1:0" Last-Modified Thu, 12 Apr 2012 19:33:45 GMT Server Microsoft-IIS/7.5 Vary Accept-Encoding X-Powered-By ASP.NET What am I doing wrong? Have I completely misunderstood the features of IIS, or is there a bug. Most importantly, how do I achieve what I want - that is get the browser to cache only PNG, JS and CSS files?

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >