Search Results

Search found 7731 results on 310 pages for 'exit failure'.

Page 53/310 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Can a non-redundant RAID5 cause any serious problems (compared to RAID0)?

  - by leemes

  I used to have a three-disc RAID5 (mdadm) in my computer for personal media storage (music, videos, photos, programs, games, ...). It had three discs with 750 GB each, resulting in an array capacity of 1.5 TB. One day (one year ago), I needed one of those discs to install another operating system. I thought, I don't need the redundancy anymore since I backup the most important stuff (personal photos e.g.) on an external disc anyway. So I decided to remove one of the three discs without converting the RAID to RAID0 or even two separate discs, because I had no temporary storage (since one cannot simply convert the RAID5 to RAID0 AFAIK). So now, for about one year, I have a non-redundant RAID5 with 2 of 3 discs running. Sometimes, one of the discs has a defective contact at the power cable or something similar causing the drive to stop working temporarily (I don't know exactly what it is). Since it still works when rebooting the computer and in most cases by calling some mdadm commands, it wasn't that problematic. Note that the data is not very critical, since I still have a backup of the most important stuff. But in the last few weeks, one of the drives fails very frequently (every few hours), so it gets really annoying to manage this. My questions are: Is there any disadvantage (apart from the annoying management) of a non-redundant RAID5 (with one drive less than typical) over a RAID0? If I understand it correctly, both have no redundancy and the same capacity. On a temporary drive failure, I can restart the array in both cases, assuming that the drive itself still works after the failure. Can it happen that the drive contents alter on a drive failure, making the array inconsistent? If so, can I tell mdadm to check the array for failures (without a file system level checking tool)? Since the drive most probably only has a defective contact causing it to fail for a second only, can I tell mdadm to automatically restart the array, so I will not even notice the failure if no application wanted to access the file system during the failure?

  Read the article

• Nagios plugin script not working as expected

  - by Linker3000

  I have modified an off-the-shelf Nagios plugin perl script to (in theory) return a one or zero according to the existence, or not, of a file on a remote linux server. The script runs a remote ssh session and logs in as the nagios user. The remote linux servers have private keys setup for that user, and on the bash command line the script works as expected, but when run as a plugin it always returns '1' (true) even if the file does not exist. Some help with the logic or a comment on why things are not working as expected within Nagios would be appreciated. I'd prefer to use this ssh login method rather than having to install nrpe on all the linux servers. To run from a command line (assuming remote server has a user called nagios with a valid private key): ./check_reboot_required -e ssh -H remote-servers-ip-addr -p 'filename-to-check' -v Ta. #! /usr/bin/perl -w # # # License Information: # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # ############################################################################ use POSIX; use strict; use Getopt::Long; use lib "/usr/lib/nagios/plugins" ; use vars qw($host $opt_V $opt_h $opt_v $verbose $PROGNAME $pattern $opt_p $mmin $opt_e $opt_t $opt_H $status $state $msg $msg_q $MAILQ $SHELL $device $used $avail $percent $fs $blocks $CMD $RMTOS); use utils qw(%ERRORS &print_revision &support &usage ); sub print_help (); sub print_usage (); sub process_arguments (); $ENV{'PATH'}=''; $ENV{'BASH_ENV'}=''; $ENV{'ENV'}=''; $PROGNAME = "check_reboot_required"; Getopt::Long::Configure('bundling'); $status = process_arguments(); if ($status){ print "ERROR: processing arguments\n"; exit $ERRORS{'UNKNOWN'}; } $SIG{'ALRM'} = sub { print ("ERROR: timed out waiting for $CMD on $host\n"); exit $ERRORS{'WARNING'}; }; $host = $opt_H; $pattern = $opt_p; print "Pattern >" . $pattern . "< " if $verbose; alarm($opt_t); #$CMD = "/usr/bin/find " . $pattern . " -type f 2>/dev/null| /usr/bin/wc -l"; $CMD = "[ -f " . $pattern . " ] && echo 1 || echo 0"; alarm($opt_t); ## get cmd output from remote system if (! open (OUTPUT, "$SHELL $host $CMD|" ) ) { print "ERROR: could not open $CMD on $host\n"; exit $ERRORS{'UNKNOWN'}; } my $perfdata = ""; my $state = "3"; my $msg = "Indeterminate result"; # only first line is relevant in this iteration. while (<OUTPUT>) { my $result = chomp($_); $msg = $result; print "Shell returned >" . $result . "< length is " . length($result) . " " if $verbose; if ( $result == 1 ) { $msg = "Reboot required (NB: Result still not accurate)" . $result ; $state = $ERRORS{'WARNING'}; last; } elsif ( $result == 0 ) { $msg = "No reboot required (NB: Result still not accurate) " . $result ; $state = $ERRORS{'OK'}; last; } else { $msg = "Output received, but it was neither a 1 nor a 0" ; last; } } close (OUTPUT); print "$msg | $perfdata\n"; exit $state; ##################################### #### subs sub process_arguments(){ GetOptions ("V" => \$opt_V, "version" => \$opt_V, "v" => \$opt_v, "verbose" => \$opt_v, "h" => \$opt_h, "help" => \$opt_h, "e=s" => \$opt_e, "shell=s" => \$opt_e, "p=s" => \$opt_p, "pattern=s" => \$opt_p, "t=i" => \$opt_t, "timeout=i" => \$opt_t, "H=s" => \$opt_H, "hostname=s" => \$opt_H ); if ($opt_V) { print_revision($PROGNAME,'$Revision: 1.0 $ '); exit $ERRORS{'OK'}; } if ($opt_h) { print_help(); exit $ERRORS{'OK'}; } if (defined $opt_v ){ $verbose = $opt_v; } if (defined $opt_e ){ if ( $opt_e eq "ssh" ) { if (-x "/usr/local/bin/ssh") { $SHELL = "/usr/local/bin/ssh"; } elsif ( -x "/usr/bin/ssh" ) { $SHELL = "/usr/bin/ssh"; } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } } elsif ( $opt_e eq "rsh" ) { $SHELL = "/usr/bin/rsh"; } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } unless (defined $opt_t) { $opt_t = $utils::TIMEOUT ; # default timeout } unless (defined $opt_H) { print_usage(); exit $ERRORS{'UNKNOWN'}; } return $ERRORS{'OK'}; } sub print_usage () { print "Usage: $PROGNAME -e <shell> -H <hostname> -p <directory/file pattern> [-t <timeout>] [-v verbose]\n"; } sub print_help () { print_revision($PROGNAME,'$Revision: 0.1 $'); print "\n"; print_usage(); print "\n"; print " Checks for the presence of a 'reboot-required' file on a remote host via SSH or RSH\n"; print "-e (--shell) = ssh or rsh (required)\n"; print "-H (--hostname) = remote server name (required)"; print "-p (--pattern) = File pattern for find command (default = /var/run/reboot-required)\n"; print "-t (--timeout) = Plugin timeout in seconds (default = $utils::TIMEOUT)\n"; print "-h (--help)\n"; print "-V (--version)\n"; print "-v (--verbose) = debugging output\n"; print "\n\n"; support(); }

  Read the article

• Why does Akonadi on KDE 4.6.0 refuse to start?

  - by Patches

  Akonadi refuses to start on my fresh installation of KDE 4.6.0 from the kubuntu-backports PPA on Ubuntu 10.10 Maverick Meerkat, preventing me from usking KMail. Here is the full error output: patches@pleistocene:~/.local/share$ akonadictl start Starting Akonadi Server... done. patches@pleistocene:~/.local/share$ Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb772e400] 3: [0xb772e416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6e9f941] 5: /lib/libc.so.6(abort+0x182) [0xb6ea2e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb74d62dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb757168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb7581425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb758295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6e8bce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb77ae400] 3: [0xb77ae416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6f1f941] 5: /lib/libc.so.6(abort+0x182) [0xb6f22e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75562dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb75f168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb7601425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb760295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6f0bce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb778b400] 3: [0xb778b416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6efc941] 5: /lib/libc.so.6(abort+0x182) [0xb6effe42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75332dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb75ce68e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb75de425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb75df95d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6ee8ce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb784e400] 3: [0xb784e416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6fbf941] 5: /lib/libc.so.6(abort+0x182) [0xb6fc2e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75f62dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb769168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb76a1425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb76a295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6fabce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) "akonadiserver" crashed too often and will not be restarted! I tried moving the ~/.local/share/akonadi folder and running it fresh, and I also tried starting Akonadi from a brand new user, all to no avail. Requested by @djeikyb: patches@pleistocene:~$ ls -ld ~/.local drwxrwx--- 3 patches patches 4096 2011-02-07 03:15 /home/patches/.local patches@pleistocene:~$ mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed patches@pleistocene:~$ mysql_upgrade -S ~/.local/share/akonadi/socket-pleistocene/ Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--socket=/home/patches/.local/share/akonadi/socket-pleistocene/' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/home/patches/.local/share/akonadi/socket-pleistocene/' (111) when trying to connect FATAL ERROR: Upgrade failed

  Read the article

• I have 6 updates that won't install on Ubuntu 12.04?

  - by Taylor

  I'm an Ubuntu novice, so any help here is greatly appreciated! I'm running Ubuntu 12.04, and I have six updates that just won't install. I've tried Update Manger, sudo apt-get upgrade, and sudo apt-get update. Nothing has worked so far. Here are the details I get from Update Manager: installArchives() failed: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... No apport report written because MaxReports is reached already Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3685 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev:No apport report written because MaxReports is reached already fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-24-generic-pae linux-image-3.2.0-27-generic-pae linux-image-3.2.0-29-generic-pae udev xserver-xorg-core fglrx fglrx-amdcccle linux-image-generic-pae linux-generic-pae xserver-xorg-video-intel fglrx-dev Error in function: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3782 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured

  Read the article

• Can't seem to get C TCP Server-Client Communications Right

  - by Zeesponge

  Ok i need some serious help here. I have to make a TCP Server Client. When the Client connects to server using a three stage handshake. AFterwards... while the Client is running in the terminal, the user enters linux shell commands like xinput list, ls -1, ect... something that uses standard output. The server accepts the commands and uses system() (in a fork() in an infinite loop) to run the commands and the standard output is redirected to the client, where the client prints out each line. Afterward the server sends a completion signal of "\377\n". In which the client goes back to the command prompt asking for a new command and closes its connection and exit()'s when inputting "quit". I know that you have to dup2() both the STDOUT_FILENO and STDERR_FILENO to the clients file descriptor {dup2(client_FD, STDOUT_FILENO). Everything works accept when it comes for the client to retrieve system()'s stdout and printing it out... all i get is a blank line with a blinking cursor (client waiting on stdin). I tried all kinds of different routes with no avail... If anyone can help out i would greatly appreciate it TCP SERVER CODE include #include <sys/socket.h> #include <stdio.h> #include <string.h> #include <netinet/in.h> #include <signal.h> #include <unistd.h> #include <stdlib.h> #include <errno.h> //Prototype void handle_client(int connect_fd); int main() { int server_sockfd, client_sockfd; socklen_t server_len, client_len; struct sockaddr_in server_address; struct sockaddr_in client_address; server_sockfd = socket(AF_INET, SOCK_STREAM, 0); server_address.sin_family = AF_INET; server_address.sin_addr.s_addr = htonl(INADDR_ANY); server_address.sin_port = htons(9734); server_len = sizeof(server_address); bind(server_sockfd, (struct sockaddr *)&server_address, server_len); /* Create a connection queue, ignore child exit details and wait for clients. */ listen(server_sockfd, 10); signal(SIGCHLD, SIG_IGN); while(1) { printf("server waiting\n"); client_len = sizeof(client_address); client_sockfd = accept(server_sockfd, (struct sockaddr *)&client_address, &client_len); if(fork() == 0) handle_client(client_sockfd); else close(client_sockfd); } } void handle_client(int connect_fd) { const char* remsh = "<remsh>\n"; const char* ready = "<ready>\n"; const char* ok = "<ok>\n"; const char* command = "<command>\n"; const char* complete = "<\377\n"; const char* shared_secret = "<shapoopi>\n"; static char server_msg[201]; static char client_msg[201]; static char commands[201]; int sys_return; //memset client_msg, server_msg, commands memset(&client_msg, 0, sizeof(client_msg)); memset(&server_msg, 0, sizeof(client_msg)); memset(&commands, 0, sizeof(commands)); //read remsh from client read(connect_fd, &client_msg, 200); //check remsh validity from client if(strcmp(client_msg, remsh) != 0) { errno++; perror("Error Establishing Handshake"); close(connect_fd); exit(1); } //memset client_msg memset(&client_msg, 0, sizeof(client_msg)); //write remsh to client write(connect_fd, remsh, strlen(remsh)); //read shared_secret from client read(connect_fd, &client_msg, 200); //check shared_secret validity from client if(strcmp(client_msg, shared_secret) != 0) { errno++; perror("Invalid Security Passphrase"); write(connect_fd, "no", 2); close(connect_fd); exit(1); } //memset client_msg memset(&client_msg, 0, sizeof(client_msg)); //write ok to client write(connect_fd, ok, strlen(ok)); // dup2 STDOUT_FILENO <= client fd, STDERR_FILENO <= client fd dup2(connect_fd, STDOUT_FILENO); dup2(connect_fd, STDERR_FILENO); //begin while... while read (client_msg) from server and >0 while(read(connect_fd, &client_msg, 200) > 0) { //check command validity from client if(strcmp(client_msg, command) != 0) { errno++; perror("Error, unable to retrieve data"); close(connect_fd); exit(1); } //memset client_msg memset(&client_msg, 0, sizeof(client_msg)); //write ready to client write(connect_fd, ready, strlen(ready)); //read commands from client read(connect_fd, &commands, 200); //run commands using system( ) sys_return = system(commands); //check success of system( ) if(sys_return < 0) { perror("Invalid Commands"); errno++; } //memset commands memset(commands, 0, sizeof(commands)); //write complete to client write(connect_fd, complete, sizeof(complete)); } } TCP CLIENT CODE #include <sys/types.h> #include <sys/socket.h> #include <stdio.h> #include <string.h> #include <netinet/in.h> #include <arpa/inet.h> #include <unistd.h> #include <stdlib.h> #include <errno.h> #include "readline.c" int main(int argc, char *argv[]) { int sockfd; int len; struct sockaddr_in address; int result; const char* remsh = "<remsh>\n"; const char* ready = "<ready>\n"; const char* ok = "<ok>\n"; const char* command = "<command>\n"; const char* complete = "<\377\n"; const char* shared_secret = "<shapoopi>\n"; static char server_msg[201]; static char client_msg[201]; memset(&client_msg, 0, sizeof(client_msg)); memset(&server_msg, 0, sizeof(server_msg)); /* Create a socket for the client. */ sockfd = socket(AF_INET, SOCK_STREAM, 0); /* Name the socket, as agreed with the server. */ memset(&address, 0, sizeof(address)); address.sin_family = AF_INET; address.sin_addr.s_addr = inet_addr(argv[1]); address.sin_port = htons(9734); len = sizeof(address); /* Now connect our socket to the server's socket. */ result = connect(sockfd, (struct sockaddr *)&address, len); if(result == -1) { perror("ACCESS DENIED"); exit(1); } //write remsh to server write(sockfd, remsh, strlen(remsh)); //read remsh from server read(sockfd, &server_msg, 200); //check remsh validity from server if(strcmp(server_msg, remsh) != 0) { errno++; perror("Error Establishing Initial Handshake"); close(sockfd); exit(1); } //memset server_msg memset(&server_msg, 0, sizeof(server_msg)); //write shared secret text to server write(sockfd, shared_secret, strlen(shared_secret)); //read ok from server read(sockfd, &server_msg, 200); //check ok velidity from server if(strcmp(server_msg, ok) != 0 ) { errno++; perror("Incorrect security phrase"); close(sockfd); exit(1); } //? dup2 STDIN_FILENO = server socket fd? //dup2(sockfd, STDIN_FILENO); //begin while(1)/////////////////////////////////////// while(1){ //memset both msg arrays memset(&client_msg, 0, sizeof(client_msg)); memset(&server_msg, 0, sizeof(server_msg)); //print Enter Command, scan input, fflush to stdout printf("<<Enter Command>> "); scanf("%s", client_msg); fflush(stdout); //check quit input, if true close and exit successfully if(strcmp(client_msg, "quit") == 0) { printf("Exiting\n"); close(sockfd); exit(EXIT_SUCCESS); } //write command to server write(sockfd, command, strlen(command)); //read ready from server read(sockfd, &server_msg, 200); //check ready validity from server if(strcmp(server_msg, ready) != 0) { errno++; perror("Failed Server Communications"); close(sockfd); exit(1); } //memset server_msg memset(&server_msg, 0, sizeof(server_msg)); //begin looping and retrieving from stdin, //break loop at EOF or complete while((read(sockfd, server_msg, 200) != 0) && (strcmp(server_msg, complete) != 0)) { //while((fgets(server_msg, 4096, stdin) != EOF) || (strcmp(server_msg, complete) == 0)) { printf("%s", server_msg); memset(&server_msg, 0, sizeof(server_msg)); } } }

  Read the article

• Nodemanager Init.d Script

  - by john.graves(at)oracle.com

  I’ve seen many of these floating around.  This is my favourite on an Ubuntu based machine. Just throw it into the /etc/init.d directory and update the following lines: export MW_HOME=/opt/app/wls10.3.4 user='weblogic' Then run: update-rc.d nodemanager default Everything else should be ok for 10.3.4. #!/bin/sh # ### BEGIN INIT INFO # Provides: nodemanager # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: WebLogic Nodemanager ### END INIT INFO # nodemgr Oracle Weblogic NodeManager service # # chkconfig: 345 85 15 # description: Oracle Weblogic NodeManager service # ### BEGIN INIT INFO # Provides: nodemgr # Required-Start: $network $local_fs # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 3 4 5 # Default-Stop: 0 1 2 6 # Short-Description: Oracle Weblogic NodeManager service. # Description: Starts and stops Oracle Weblogic NodeManager. ### END INIT INFO # Source function library. . /lib/lsb/init-functions # set Weblogic environment defining CLASSPATH and LD_LIBRARY_PATH # to start/stop various components. export MW_HOME=/opt/app/wls10.3.4 # # Note: # The setWLSEnv.sh not only does a good job of setting the environment, # but also advertises the fact explicitly in the console! Silence it. # . $MW_HOME/wlserver_10.3/server/bin/setWLSEnv.sh > /dev/null # set NodeManager environment export NodeManagerHome=$WL_HOME/common/nodemanager NodeManagerLockFile=$NodeManagerHome/nodemanager.log.lck # check JAVA_HOME if [ -z ${JAVA_HOME:-} ]; then export JAVA_HOME=/opt/sun/products/java/jdk1.6.0_18 fi exec=$MW_HOME/wlserver_10.3/server/bin/startNodeManager.sh prog='nodemanager' user='weblogic' is_nodemgr_running() { local nodemgr_cnt=`ps -ef | \ grep -i 'java ' | \ grep -i ' weblogic.NodeManager ' | \ grep -v grep | \ wc -l` echo $nodemgr_cnt } get_nodemgr_pid() { nodemgr_pid=0 if [ `is_nodemgr_running` -eq 1 ]; then nodemgr_pid=`ps -ef | \ grep -i 'java ' | \ grep -i ' weblogic.NodeManager ' | \ grep -v grep | \ tr -s ' ' | \ cut -d' ' -f2` fi echo $nodemgr_pid } check_nodemgr_status () { local retval=0 local nodemgr_cnt=`is_nodemgr_running` if [ $nodemgr_cnt -eq 0 ]; then if [ -f $NodeManagerLockFile ]; then retval=2 else retval=3 fi elif [ $nodemgr_cnt -gt 1 ]; then retval=4 else retval=0 fi echo $retval } start() { ulimit -n 65535 [ -x $exec ] || exit 5 echo -n $"Starting $prog: " su $user -c "$exec &" retval=$? echo return $retval } stop() { echo -n $"Stopping $prog: " kill -s 9 `get_nodemgr_pid` &> /dev/null retval=$? echo [ $retval -eq 0 ] && rm -f $NodeManagerLockFile return $retval } restart() { stop start } reload() { restart } force_reload() { restart } rh_status() { local retval=`check_nodemgr_status` if [ $retval -eq 0 ]; then echo "$prog (pid:`get_nodemgr_pid`) is running..." elif [ $retval -eq 4 ]; then echo "Multiple instances of $prog are running..." else echo "$prog is stopped" fi return $retval } rh_status_q() { rh_status >/dev/null 2>&1 } case "$1" in start) rh_status_q && exit 0 $1 ;; stop) rh_status_q || exit 0 $1 ;; restart) $1 ;; reload) rh_status_q || exit 7 $1 ;; force-reload) force_reload ;; status) rh_status ;; condrestart|try-restart) rh_status_q || exit 0 restart ;; *) echo -n "Usage: $0 {" echo -n "start|" echo -n "stop|" echo -n "status|" echo -n "restart|" echo -n "condrestart|" echo -n "try-restart|" echo -n "reload|" echo -n "force-reload" echo "}" exit 2 esac exit $? .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }

  Read the article

• Is it possible to group validation?

  - by lambdabutz

  I am using a lot of my own validation methods to compare the data from one association to the other. I've noticed that I'm constantly checking that my associations aren't nil before trying to call anything on them, but I am also validating their presence, and so I feel that my nil checks are redundant. Here's an example: class House < ActiveRecord::Base has_one :enterance, :class => Door has_one :exit, :class => Door validates_presence_of :enterance, :exit validate :not_a_fire_hazard def not_a_fire_hazard if enterance && exit && enterance.location != exit.location errors.add_to_base('If there is a fire you will most likely die') return false end end end I feel like I am repeating myself by checking the existence of enterance and exit within my own validation. Is there a more "The Rails Way" to do this?

  Read the article

• pthread_exit return value

  - by Manty

  This is surprising for me. void * thread_func(void *arg) { pthread_exit(&ret); } int main(void) { pthread_t thr; int *exit_status; pthread_create(&thr, NULL, thread_func, NULL); sleep(2); pthread_join(thr, (void **)&exit_status); printf("value of exit status - %d\n", *exit_status); ret = 20; pthread_join(thr, (void **)&exit_status); printf("value of exit status - %d\n", *exit_status); return 0; } The output is value of exit status - 50 value of exit status - 20 I was expecting both the times the exit_status would be the actual exit value(50 in my case) of the thread. Instead it is just returning the value of the global variable which I used for pthread_exit. Is it not a bug?

  Read the article

• Oracle Coherence, Split-Brain and Recovery Protocols In Detail

  - by Ricardo Ferreira

  This article provides a high level conceptual overview of Split-Brain scenarios in distributed systems. It will focus on a specific example of cluster communication failure and recovery in Oracle Coherence. This includes a discussion on the witness protocol (used to remove failed cluster members) and the panic protocol (used to resolve Split-Brain scenarios). Note that the removal of cluster members does not necessarily indicate a Split-Brain condition. Oracle Coherence does not (and cannot) detect a Split-Brain as it occurs, the condition is only detected when cluster members that previously lost contact with each other regain contact. Cluster Topology and Configuration In order to create an good didactic for the article, let's assume a cluster topology and configuration. In this example we have a six member cluster, consisting of one JVM on each physical machine. The member IDs are as follows: Member ID  IP Address  1  10.149.155.76  2  10.149.155.77  3  10.149.155.236  4  10.149.155.75  5  10.149.155.79  6  10.149.155.78 Members 1, 2, and 3 are connected to a switch, and members 4, 5, and 6 are connected to a second switch. There is a link between the two switches, which provides network connectivity between all of the machines. Member 1 is the first member to join this cluster, thus making it the senior member. Member 6 is the last member to join this cluster. Here is a log snippet from Member 6 showing the complete member set: 2010-02-26 15:27:57.390/3.062 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=6): Started DefaultCacheServer... SafeCluster: Name=cluster:0xDDEB Group{Address=224.3.5.3, Port=35465, TTL=4} MasterMemberSet ( ThisMember=Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) OldestMember=Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ActualMemberSet=MemberSet(Size=6, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) RecycleMillis=120000 RecycleSet=MemberSet(Size=0, BitSetCount=0 ) ) At approximately 15:30, the connection between the two switches is severed: Thirty seconds later (the default packet timeout in development mode) the logs indicate communication failures across the cluster. In this example, the communication failure was caused by a network failure. In a production setting, this type of communication failure can have many root causes, including (but not limited to) network failures, excessive GC, high CPU utilization, swapping/virtual memory, and exceeding maximum network bandwidth. In addition, this type of failure is not necessarily indicative of a split brain. Any communication failure will be logged in this fashion. Member 2 logs a communication failure with Member 5: 2010-02-26 15:30:32.638/196.928 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) ) The Coherence clustering protocol (TCMP) is a reliable transport mechanism built on UDP. In order for the protocol to be reliable, it requires an acknowledgement (ACK) for each packet delivered. If a packet fails to be acknowledged within the configured timeout period, the Coherence cluster member will log a packet timeout (as seen in the log message above). When this occurs, the cluster member will consult with other members to determine who is at fault for the communication failure. If the witness members agree that the suspect member is at fault, the suspect is removed from the cluster. If the witnesses unanimously disagree, the accuser is removed. This process is known as the witness protocol. Since Member 2 cannot communicate with Member 5, it selects two witnesses (Members 1 and 4) to determine if the communication issue is with Member 5 or with itself (Member 2). However, Member 4 is on the switch that is no longer accessible by Members 1, 2 and 3; thus a packet timeout for member 4 is recorded as well: 2010-02-26 15:30:35.648/199.938 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) Member 1 has the ability to confirm the departure of member 4, however Member 6 cannot as it is also inaccessible. At the same time, Member 3 sends a request to remove Member 6, which is followed by a report from Member 3 indicating that Member 6 has departed the cluster: 2010-02-26 15:30:35.706/199.996 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft request for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) 2010-02-26 15:30:35.709/199.999 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft notification for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) The log for Member 3 determines how Member 6 departed the cluster: 2010-02-26 15:30:35.161/191.694 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=3): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ) 2010-02-26 15:30:35.165/191.698 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=3): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ); removing Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) In this case, Member 3 happened to select two witnesses that it still had connectivity with (Members 1 and 2) thus resulting in a simple decision to remove Member 6. Given the departure of Member 6, Member 2 is left with a single witness to confirm the departure of Member 4: 2010-02-26 15:30:35.713/200.003 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=2): Member departure confirmed by MemberSet(Size=1, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ); removing Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) In the meantime, Member 4 logs a missing heartbeat from the senior member. This message is also logged on Members 5 and 6. 2010-02-26 15:30:07.906/150.453 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=PacketListenerN, member=4): Scheduled senior member heartbeat is overdue; rejoining multicast group. Next, Member 4 logs a TcpRing failure with Member 2, thus resulting in the termination of Member 2: 2010-02-26 15:30:21.421/163.968 Oracle Coherence GE 3.5.3/465p2 <D4> (thread=Cluster, member=4): TcpRing: Number of socket exceptions exceeded maximum; last was "java.net.SocketTimeoutException: connect timed out"; removing the member: 2 For quick process termination detection, Oracle Coherence utilizes a feature called TcpRing which is a sparse collection of TCP/IP-based connections between different members in the cluster. Each member in the cluster is connected to at least one other member, which (if at all possible) is running on a different physical box. This connection is not used for any data transfer, only heartbeat communications are sent once a second per each link. If a certain number of exceptions are thrown while trying to re-establish a connection, the member throwing the exceptions is removed from the cluster. Member 5 logs a packet timeout with Member 3 and cites witnesses Members 4 and 6: 2010-02-26 15:30:29.791/165.037 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=5): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) 2010-02-26 15:30:29.798/165.044 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=5): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ); removing Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Eventually we are left with two distinct clusters consisting of Members 1, 2, 3 and Members 4, 5, 6, respectively. In the latter cluster, Member 4 is promoted to senior member. The connection between the two switches is restored at 15:33. Upon the restoration of the connection, the cluster members immediately receive cluster heartbeats from the two senior members. In the case of Members 1, 2, and 3, the following is logged: 2010-02-26 15:33:14.970/369.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): The member formerly known as Member(Id=4, Timestamp=2010-02-26 15:30:35.341, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. Likewise for Members 4, 5, and 6: 2010-02-26 15:33:14.343/336.890 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=4): The member formerly known as Member(Id=1, Timestamp=2010-02-26 15:30:31.64, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. This message indicates that a senior heartbeat is being received from members that were previously removed from the cluster, in other words, something that should not be possible. For this reason, the recipients of these messages will initially ignore them. After several iterations of these messages, the existence of multiple clusters is acknowledged, thus triggering the panic protocol to reconcile this situation. When the presence of more than one cluster (i.e. Split-Brain) is detected by a Coherence member, the panic protocol is invoked in order to resolve the conflicting clusters and consolidate into a single cluster. The protocol consists of the removal of smaller clusters until there is one cluster remaining. In the case of equal size clusters, the one with the older Senior Member will survive. Member 1, being the oldest member, initiates the protocol: 2010-02-26 15:33:45.970/400.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): An existence of a cluster island with senior Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) containing 3 nodes have been detected. Since this Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) is the senior of an older cluster island, the panic protocol is being activated to stop the other island's senior and all junior nodes that belong to it. Member 3 receives the panic: 2010-02-26 15:33:45.803/382.336 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=3): Received panic from senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) caused by Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member 4, the senior member of the younger cluster, receives the kill message from Member 3: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. In turn, Member 4 requests the departure of its junior members 5 and 6: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:43.343/349.015 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=6): Received a Kill message from a valid Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer); stopping cluster service. Once Members 4, 5, and 6 restart, they rejoin the original cluster with senior member 1. The log below is from Member 4. Note that it receives a different member id when it rejoins the cluster. 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:46.921/369.468 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Service Cluster left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:InvocationService, member=4): Service InvocationService left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=OptimisticCache, member=4): Service OptimisticCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=ReplicatedCache, member=4): Service ReplicatedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=DistributedCache, member=4): Service DistributedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:Management, member=4): Service Management left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service Management with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service DistributedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service ReplicatedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service OptimisticCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service InvocationService with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member(Id=6, Timestamp=2010-02-26 15:33:47.046, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) left Cluster with senior member 4 2010-02-26 15:33:49.218/371.765 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=n/a): Restarting cluster 2010-02-26 15:33:49.421/371.968 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a 2010-02-26 15:33:49.625/372.172 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=n/a): This Member(Id=5, Timestamp=2010-02-26 15:33:50.499, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster "cluster:0xDDEB" with senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) Cool isn't it?

  Read the article

• InnoDB Compression Improvements in MySQL 5.6

  - by Inaam Rana

  MySQL 5.6 comes with significant improvements for the compression support inside InnoDB. The enhancements that we'll talk about in this piece are also a good example of community contributions. The work on these was conceived, implemented and contributed by the engineers at Facebook. Before we plunge into the details let us familiarize ourselves with some of the key concepts surrounding InnoDB compression. In InnoDB compressed pages are fixed size. Supported sizes are 1, 2, 4, 8 and 16K. The compressed page size is specified at table creation time. InnoDB uses zlib for compression. InnoDB buffer pool will attempt to cache compressed pages like normal pages. However, whenever a page is actively used by a transaction, we'll always have the uncompressed version of the page as well i.e.: we can have a page in the buffer pool in compressed only form or in a state where we have both the compressed page and uncompressed version but we'll never have a page in uncompressed only form. On-disk we'll always only have the compressed page. When both compressed and uncompressed images are present in the buffer pool they are always kept in sync i.e.: changes are applied to both atomically. Recompression happens when changes are made to the compressed data. In order to minimize recompressions InnoDB maintains a modification log within a compressed page. This is the extra space available in the page after compression and it is used to log modifications to the compressed data thus avoiding recompressions. DELETE (and ROLLBACK of DELETE) and purge can be performed without recompressing the page. This is because the delete-mark bit and the system fields DB_TRX_ID and DB_ROLL_PTR are stored in uncompressed format on the compressed page. A record can be purged by shuffling entries in the compressed page directory. This can also be useful for updates of indexed columns, because UPDATE of a key is mapped to INSERT+DELETE+purge. A compression failure happens when we attempt to recompress a page and it does not fit in the fixed size. In such case, we first try to reorganize the page and attempt to recompress and if that fails as well then we split the page into two and recompress both pages. Now lets talk about the three major improvements that we made in MySQL 5.6.Logging of Compressed Page Images:InnoDB used to log entire compressed data on the page to the redo logs when recompression happens. This was an extra safety measure to guard against the rare case where an attempt is made to do recovery using a different zlib version from the one that was used before the crash. Because recovery is a page level operation in InnoDB we have to be sure that all recompress attempts must succeed without causing a btree page split. However, writing entire compressed data images to the redo log files not only makes the operation heavy duty but can also adversely affect flushing activity. This happens because redo space is used in a circular fashion and when we generate much more than normal redo we fill up the space much more quickly and in order to reuse the redo space we have to flush the corresponding dirty pages from the buffer pool.Starting with MySQL 5.6 a new global configuration parameter innodb_log_compressed_pages. The default value is true which is same as the current behavior. If you are sure that you are not going to attempt to recover from a crash using a different version of zlib then you should set this parameter to false. This is a dynamic parameter.Compression Level:You can now set the compression level that zlib should choose to compress the data. The global parameter is innodb_compression_level - the default value is 6 (the zlib default) and allowed values are 1 to 9. Again the parameter is dynamic i.e.: you can change it on the fly.Dynamic Padding to Reduce Compression Failures:Compression failures are expensive in terms of CPU. We go through the hoops of recompress, failure, reorganize, recompress, failure and finally page split. At the same time, how often we encounter compression failure depends largely on the compressibility of the data. In MySQL 5.6, courtesy of Facebook engineers, we have an adaptive algorithm based on per-index statistics that we gather about compression operations. The idea is that if a certain index/table is experiencing too many compression failures then we should try to pack the 16K uncompressed version of the page less densely i.e.: we let some space in the 16K page go unused in an attempt that the recompression won't end up in a failure. In other words, we dynamically keep adding 'pad' to the 16K page till we get compression failures within an agreeable range. It works the other way as well, that is we'll keep removing the pad if failure rate is fairly low. To tune the padding effort two configuration variables are exposed. innodb_compression_failure_threshold_pct: default 5, range 0 - 100,dynamic, implies the percentage of compress ops to fail before we start using to padding. Value 0 has a special meaning of disabling the padding. innodb_compression_pad_pct_max: default 50, range 0 - 75, dynamic, the  maximum percentage of uncompressed data page that can be reserved as pad.

  Read the article

• Problem in udp socket programing in c

  - by Md. Talha

  I complile the following C code of UDP client after I run './udpclient localhost 9191' in terminal.I put "Enter Text= " as Hello, but it is showing error in sendto as below: Enter text: hello hello : error in sendto()guest-1SDRJ2@md-K42F:~/Desktop$ " Note: I open 1st the server port as below in other terminal ./server 9191. I beleive there is no error in server code. The udp client is not passing message to server. If I don't use thread , the message is passing .But I have to do it by thread. UDP client Code: /* simple UDP echo client */ #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #include <stdio.h> #include <pthread.h> #define STRLEN 1024 static void *readdata(void *); static void *writedata(void *); int sockfd, n, slen; struct sockaddr_in servaddr; char sendline[STRLEN], recvline[STRLEN]; int main(int argc, char *argv[]) { pthread_t readid,writeid; struct sockaddr_in servaddr; struct hostent *h; if(argc != 3) { printf("Usage: %s <proxy server ip> <port>\n", argv[0]); exit(0); } /* create hostent structure from user entered host name*/ if ( (h = gethostbyname(argv[1])) == NULL) { printf("\n%s: error in gethostbyname()", argv[0]); exit(0); } /* create server address structure */ bzero(&servaddr, sizeof(servaddr)); /* initialize it */ servaddr.sin_family = AF_INET; memcpy((char *) &servaddr.sin_addr.s_addr, h->h_addr_list[0], h->h_length); servaddr.sin_port = htons(atoi(argv[2])); /* get the port number from argv[2]*/ /* create a UDP socket: SOCK_DGRAM */ if ( (sockfd = socket(AF_INET,SOCK_DGRAM, 0)) < 0) { printf("\n%s: error in socket()", argv[0]); exit(0); } pthread_create(&readid,NULL,&readdata,NULL); pthread_create(&writeid,NULL,&writedata,NULL); while(1) { }; close(sockfd); } static void * writedata(void *arg) { /* get user input */ printf("\nEnter text: "); do { if (fgets(sendline, STRLEN, stdin) == NULL) { printf("\n%s: error in fgets()"); exit(0); } /* send a text */ if (sendto(sockfd, sendline, sizeof(sendline), 0, (struct sockaddr *) &servaddr, sizeof(servaddr)) < 0) { printf("\n%s: error in sendto()"); exit(0); } }while(1); } static void * readdata(void *arg) { /* wait for echo */ slen = sizeof(servaddr); if ( (n = recvfrom(sockfd, recvline, STRLEN, 0, (struct sockaddr *) &servaddr, &slen)) < 0) { printf("\n%s: error in recvfrom()"); exit(0); } /* null terminate the string */ recvline[n] = 0; fputs(recvline, stdout); }

  Read the article

• Ask a DNS server what sites it hosts - and how to possibly prevent misuse

  - by Exit

  I've got a server which I host my company website as well as some of my clients. I noticed a domain which I created, but never used, was being attacked by a poke and hope hacker. I imagine that the hacker collected the domain from either hitting my DNS server and requesting what domains are hosted. So, in the interest of prevention and better server management, how would I ask my own DNS server (Linux CentOS 4) what sites are being hosted on it? Also, is there a way to prevent these types of attacks by hiding this information? I would assume that DNS servers would need to keep some information public, but I'm not sure if there is something that most hosts do to help prevent these bandwidth wasting poke and hope attacks. Thanks in advance.

  Read the article

• Returning a list from a function in Python

  - by Jasper

  Hi, I'm creating a game for my sister, and I want a function to return a list variable, so I can pass it to another variable. The relevant code is as follows: def startNewGame(): while 1: #Introduction: print print """Hello, You will now be guided through the setup process. There are 7 steps to this. You can cancel setup at any time by typing 'cancelSetup' Thankyou""" #Step 1 (Name): print print """Step 1 of 7: Type in a name for your PotatoHead: """ inputPHName = raw_input('|Enter Name:|') if inputPHName == 'cancelSetup': sys.exit() #Step 2 (Gender): print print """Step 2 of 7: Choose the gender of your PotatoHead: input either 'm' or 'f' """ inputPHGender = raw_input('|Enter Gender:|') if inputPHGender == 'cancelSetup': sys.exit() #Step 3 (Colour): print print """Step 3 of 7: Choose the colour your PotatoHead will be: Only Red, Blue, Green and Yellow are currently supported """ inputPHColour = raw_input('|Enter Colour:|') if inputPHColour == 'cancelSetup': sys.exit() #Step 4 (Favourite Thing): print print """Step 4 of 7: Type your PotatoHead's favourite thing: """ inputPHFavThing = raw_input('|Enter Favourite Thing:|') if inputPHFavThing == 'cancelSetup': sys.exit() # Step 5 (First Toy): print print """Step 5 of 7: Choose a first toy for your PotatoHead: """ inputPHFirstToy = raw_input('|Enter First Toy:|') if inputPHFirstToy == 'cancelSetup': sys.exit() #Step 6 (Check stats): while 1: print print """Step 6 of 7: Check the following details to make sure that they are correct: """ print print """Name:\t\t\t""" + inputPHName + """ Gender:\t\t\t""" + inputPHGender + """ Colour:\t\t\t""" + inputPHColour + """ Favourite Thing:\t""" + inputPHFavThing + """ First Toy:\t\t""" + inputPHFirstToy + """ """ print print "Enter 'y' or 'n'" inputMCheckStats = raw_input('|Is this information correct?|') if inputMCheckStats == 'cancelSetup': sys.exit() elif inputMCheckStats == 'y': break elif inputMCheckStats == 'n': print "Re-enter info: ..." print break else: "The value you entered was incorrect, please re-enter your choice" if inputMCheckStats == 'y': break #Step 7 (Define variables for the creation of the PotatoHead): MFCreatePH = [] print print """Step 7 of 7: Your PotatoHead will now be created... Creating variables... """ MFCreatePH = [inputPHName, inputPHGender, inputPHColour, inputPHFavThing, inputPHFirstToy] time.sleep(1) print "inputPHName" print time.sleep(1) print "inputPHFirstToy" print return MFCreatePH print "Your PotatoHead varibles have been successfully created!" Then it is passed to another function that was imported from another module from potatohead import * ... welcomeMessage() MCreatePH = startGame() myPotatoHead = PotatoHead(MCreatePH) the code for the PotatoHead object is in the potatohead.py module which was imported above, and is as follows: class PotatoHead: #Initialise the PotatoHead object: def __init__(self, data): self.data = data #Takes the data from the start new game function - see main.py #Defines the PotatoHead starting attributes: self.name = data[0] self.gender = data[1] self.colour = data[2] self.favouriteThing = data[3] self.firstToy = data[4] self.age = '0.0' self.education = [self.eduScience, self.eduEnglish, self.eduMaths] = '0.0', '0.0', '0.0' self.fitness = '0.0' self.happiness = '10.0' self.health = '10.0' self.hunger = '0.0' self.tiredness = 'Not in this version' self.toys = [] self.toys.append(self.firstToy) self.time = '0' #Sets data lists for saving, loading and general use: self.phData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy) self.phAdvData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy, self.age, self.education, self.fitness, self.happiness, self.health, self.hunger, self.tiredness, self.toys) However, when I run the program this error appears: Traceback (most recent call last): File "/Users/Jasper/Documents/Programming/Potato Head Game/Current/main.py", line 158, in <module> myPotatoHead = PotatoHead(MCreatePH) File "/Users/Jasper/Documents/Programming/Potato Head Game/Current/potatohead.py", line 15, in __init__ self.name = data[0] TypeError: 'NoneType' object is unsubscriptable What am i doing wrong? -----EDIT----- The program finishes as so: Step 7 of 7: Your PotatoHead will now be created... Creating variables... inputPHName inputPHFirstToy Then it goes to the Tracback -----EDIT2----- This is the EXACT code I'm running in its entirety: #+--------------------------------------+# #| main.py |# #| A main module for the Potato Head |# #| Game to pull the other modules |# #| together and control through user |# #| input |# #| Author: |# #| Date Created / Modified: |# #| 3/2/10 | 20/2/10 |# #+--------------------------------------+# Tested: No #Import the required modules: import time import random import sys from potatohead import * from toy import * #Start the Game: def welcomeMessage(): print "----- START NEW GAME -----------------------" print "==Print Welcome Message==" print "loading... \t loading... \t loading..." time.sleep(1) print "loading..." time.sleep(1) print "LOADED..." print; print; print; print """Hello, Welcome to the Potato Head Game. In this game you can create a Potato Head, and look after it, like a Virtual Pet. This game is constantly being updated and expanded. Please look out for updates. """ #Choose whether to start a new game or load a previously saved game: def startGame(): while 1: print "--------------------" print """ Choose an option: New_Game or Load_Game """ startGameInput = raw_input('>>> >') if startGameInput == 'New_Game': startNewGame() break elif startGameInput == 'Load_Game': print "This function is not yet supported" print "Try Again" print else: print "You must have mistyped the command: Type either 'New_Game' or 'Load_Game'" print #Set the new game up: def startNewGame(): while 1: #Introduction: print print """Hello, You will now be guided through the setup process. There are 7 steps to this. You can cancel setup at any time by typing 'cancelSetup' Thankyou""" #Step 1 (Name): print print """Step 1 of 7: Type in a name for your PotatoHead: """ inputPHName = raw_input('|Enter Name:|') if inputPHName == 'cancelSetup': sys.exit() #Step 2 (Gender): print print """Step 2 of 7: Choose the gender of your PotatoHead: input either 'm' or 'f' """ inputPHGender = raw_input('|Enter Gender:|') if inputPHGender == 'cancelSetup': sys.exit() #Step 3 (Colour): print print """Step 3 of 7: Choose the colour your PotatoHead will be: Only Red, Blue, Green and Yellow are currently supported """ inputPHColour = raw_input('|Enter Colour:|') if inputPHColour == 'cancelSetup': sys.exit() #Step 4 (Favourite Thing): print print """Step 4 of 7: Type your PotatoHead's favourite thing: """ inputPHFavThing = raw_input('|Enter Favourite Thing:|') if inputPHFavThing == 'cancelSetup': sys.exit() # Step 5 (First Toy): print print """Step 5 of 7: Choose a first toy for your PotatoHead: """ inputPHFirstToy = raw_input('|Enter First Toy:|') if inputPHFirstToy == 'cancelSetup': sys.exit() #Step 6 (Check stats): while 1: print print """Step 6 of 7: Check the following details to make sure that they are correct: """ print print """Name:\t\t\t""" + inputPHName + """ Gender:\t\t\t""" + inputPHGender + """ Colour:\t\t\t""" + inputPHColour + """ Favourite Thing:\t""" + inputPHFavThing + """ First Toy:\t\t""" + inputPHFirstToy + """ """ print print "Enter 'y' or 'n'" inputMCheckStats = raw_input('|Is this information correct?|') if inputMCheckStats == 'cancelSetup': sys.exit() elif inputMCheckStats == 'y': break elif inputMCheckStats == 'n': print "Re-enter info: ..." print break else: "The value you entered was incorrect, please re-enter your choice" if inputMCheckStats == 'y': break #Step 7 (Define variables for the creation of the PotatoHead): MFCreatePH = [] print print """Step 7 of 7: Your PotatoHead will now be created... Creating variables... """ MFCreatePH = [inputPHName, inputPHGender, inputPHColour, inputPHFavThing, inputPHFirstToy] time.sleep(1) print "inputPHName" print time.sleep(1) print "inputPHFirstToy" print return MFCreatePH print "Your PotatoHead varibles have been successfully created!" #Run Program: welcomeMessage() MCreatePH = startGame() myPotatoHead = PotatoHead(MCreatePH) The potatohead.py module is as follows: #+--------------------------------------+# #| potatohead.py |# #| A module for the Potato Head Game |# #| Author: |# #| Date Created / Modified: |# #| 24/1/10 | 24/1/10 |# #+--------------------------------------+# Tested: Yes (24/1/10) #Create the PotatoHead class: class PotatoHead: #Initialise the PotatoHead object: def __init__(self, data): self.data = data #Takes the data from the start new game function - see main.py #Defines the PotatoHead starting attributes: self.name = data[0] self.gender = data[1] self.colour = data[2] self.favouriteThing = data[3] self.firstToy = data[4] self.age = '0.0' self.education = [self.eduScience, self.eduEnglish, self.eduMaths] = '0.0', '0.0', '0.0' self.fitness = '0.0' self.happiness = '10.0' self.health = '10.0' self.hunger = '0.0' self.tiredness = 'Not in this version' self.toys = [] self.toys.append(self.firstToy) self.time = '0' #Sets data lists for saving, loading and general use: self.phData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy) self.phAdvData = (self.name, self.gender, self.colour, self.favouriteThing, self.firstToy, self.age, self.education, self.fitness, self.happiness, self.health, self.hunger, self.tiredness, self.toys) #Define the phStats variable, enabling easy display of PotatoHead attributes: def phDefStats(self): self.phStats = """Your Potato Head's Stats are as follows: ---------------------------------------- Name: \t\t""" + self.name + """ Gender: \t\t""" + self.gender + """ Colour: \t\t""" + self.colour + """ Favourite Thing: \t""" + self.favouriteThing + """ First Toy: \t""" + self.firstToy + """ Age: \t\t""" + self.age + """ Education: \t""" + str(float(self.eduScience) + float(self.eduEnglish) + float(self.eduMaths)) + """ -> Science: \t""" + self.eduScience + """ -> English: \t""" + self.eduEnglish + """ -> Maths: \t""" + self.eduMaths + """ Fitness: \t""" + self.fitness + """ Happiness: \t""" + self.happiness + """ Health: \t""" + self.health + """ Hunger: \t""" + self.hunger + """ Tiredness: \t""" + self.tiredness + """ Toys: \t\t""" + str(self.toys) + """ Time: \t\t""" + self.time + """ """ #Change the PotatoHead's favourite thing: def phChangeFavouriteThing(self, newFavouriteThing): self.favouriteThing = newFavouriteThing phChangeFavouriteThingMsg = "Your Potato Head's favourite thing is " + self.favouriteThing + "." #"Feed" the Potato Head i.e. Reduce the 'self.hunger' attribute's value: def phFeed(self): if float(self.hunger) >=3.0: self.hunger = str(float(self.hunger) - 3.0) elif float(self.hunger) < 3.0: self.hunger = '0.0' self.time = str(int(self.time) + 1) #Pass time #"Exercise" the Potato Head if between the ages of 5 and 25: def phExercise(self): if float(self.age) < 5.1 or float(self.age) > 25.1: print "This Potato Head is either too young or too old for this activity!" else: if float(self.fitness) <= 8.0: self.fitness = str(float(self.fitness) + 2.0) elif float(self.fitness) > 8.0: self.fitness = '10.0' self.time = str(int(self.time) + 1) #Pass time #"Teach" the Potato Head: def phTeach(self, subject): if subject == 'Science': if float(self.eduScience) <= 9.0: self.eduScience = str(float(self.eduScience) + 1.0) elif float(self.eduScience) > 9.0 and float(self.eduScience) < 10.0: self.eduScience = '10.0' elif float(self.eduScience) == 10.0: print "Your Potato Head has gained the highest level of qualifications in this subject! It cannot learn any more!" elif subject == 'English': if float(self.eduEnglish) <= 9.0: self.eduEnglish = str(float(self.eduEnglish) + 1.0) elif float(self.eduEnglish) > 9.0 and float(self.eduEnglish) < 10.0: self.eduEnglish = '10.0' elif float(self.eduEnglish) == 10.0: print "Your Potato Head has gained the highest level of qualifications in this subject! It cannot learn any more!" elif subject == 'Maths': if float(self.eduMaths) <= 9.0: self.eduMaths = str(float(self.eduMaths) + 1.0) elif float(self.eduMaths) > 9.0 and float(self.eduMaths) < 10.0: self.eduMaths = '10.0' elif float(self.eduMaths) == 10.0: print "Your Potato Head has gained the highest level of qualifications in this subject! It cannot learn any more!" else: print "That subject is not an option..." print "Please choose either Science, English or Maths" self.time = str(int(self.time) + 1) #Pass time #Increase Health: def phGoToDoctor(self): self.health = '10.0' self.time = str(int(self.time) + 1) #Pass time #Sleep: Age, change stats: #(Time Passes) def phSleep(self): self.time = '0' #Resets time for next 'day' (can do more things next day) #Increase hunger: if float(self.hunger) <= 5.0: self.hunger = str(float(self.hunger) + 5.0) elif float(self.hunger) > 5.0: self.hunger = '10.0' #Lower Fitness: if float(self.fitness) >= 0.5: self.fitness = str(float(self.fitness) - 0.5) elif float(self.fitness) < 0.5: self.fitness = '0.0' #Lower Health: if float(self.health) >= 0.5: self.health = str(float(self.health) - 0.5) elif float(self.health) < 0.5: self.health = '0.0' #Lower Happiness: if float(self.happiness) >= 2.0: self.happiness = str(float(self.happiness) - 2.0) elif float(self.happiness) < 2.0: self.happiness = '0.0' #Increase the Potato Head's age: self.age = str(float(self.age) + 0.1) The game is still under development - There may be parts of modules that aren't complete, but I don't think they're causing the problem

  Read the article

• linearRGB conversion to/from HSL

  - by Otaku

  Does anyone know of a way to get HSL from an linearRGB color (not an sRGB color)? I've seen a lot of sRGB<-HSL conversions, but nothing for linearRGB<-HSL. Not sure if it is fundementally the same conversion with minor tweaks, but I'd appreciate any insight someone may have on this. Linear RGB is not the same as linearizing sRGB (which is taking [0,255] and making it [0,1]). Linear RGB transformation from/to sRGB is at http://en.wikipedia.org/wiki/SRGB. In VBA, this would be expressed (taking in linearized sRGB values [0,1]): Public Function sRGB_to_linearRGB(value As Double) If value < 0# Then sRGB_to_linearRGB = 0# Exit Function End If If value <= 0.04045 Then sRGB_to_linearRGB = value / 12.92 Exit Function End If If value <= 1# Then sRGB_to_linearRGB = ((value + 0.055) / 1.055) ^ 2.4 Exit Function End If sRGB_to_linearRGB = 1# End Function Public Function linearRGB_to_sRGB(value As Double) If value < 0# Then linearRGB_to_sRGB = 0# Exit Function End If If value <= 0.0031308 Then linearRGB_to_sRGB = value * 12.92 Exit Function End If If value < 1# Then linearRGB_to_sRGB = 1.055 * (value ^ (1# / 2.4)) - 0.055 Exit Function End If linearRGB_to_sRGB = 1# End Function I have tried sending in Linear RGB values to standard RGB_to_HSL routines and back out from HSL_to_RGB, but it does not work. I have seen almost no references that this can be done, except for two: A reference on http://en.wikipedia.org/wiki/HSL_and_HSV#cite_note-9 (numbered item 10). A reference on an open source project Grafx2 @ http://code.google.com/p/grafx2/issues/detail?id=63#c22 in which the contributor states that he has done Linear RGB <- HSL conversion and provides some C code in an attachment to his comment in a .diff file (which I can't really read :( ) My intent is to send from sRGB (for example, FF99FF (R=255, G=153, B=255)) to Linear RGB (R=1.0, G=0.318546778125092, B=1.0) using the code above (for example, the G=153 would be obtained in Linear RGB from sRGB_to_linearRGB(153 / 255)) to HSL, modify the Saturation by 350% and going back from HSL-Linear RGB-sRGB, the result would be FF19FF (R=255, G=25, B=255). Using available functions from .NET, such as .getHue from a System.Drawing.Color does not work in any sRGB space above 100% modulation of any HSL value, hence the need for Linear RGB to be sent in instead of sRGB.

  Read the article

• What could cause these Apache crash errors ?

  - by jacobanderssen

  Hello guys. I had a server crash several days ago. I use Cacti to keep stats: at the time when the server crashed, a huge spike from Load 1 to Load 200 occurred, with over 800 processes in the run queue ( from 300 average). Upon checking /var/log/httpd I notice this: * glibc detected /usr/sbin/httpd: double free or corruption (out): 0x00002b8f3142c2f0 ** Followed by alot of these: [Sat Mar 13 19:20:20 2010] [warn] child process 3090 still did not exit, sending a SIGTERM [Sat Mar 13 19:20:20 2010] [warn] child process 3091 still did not exit, sending a SIGTERM Followed by this: ======= Backtrace: ========= /lib64/libc.so.6[0x2b8f1463c2ef] /lib64/libc.so.6(cfree+0x4b)[0x2b8f1463c73b] /usr/lib64/libapr-1.so.0(apr_pool_destroy+0x131)[0x2b8f13f98821] /usr/sbin/httpd[0x2b8f126df47e] /usr/sbin/httpd[0x2b8f126df4ab] /lib64/libpthread.so.0[0x2b8f141b87c0] /etc/httpd/modules/mod_file_cache.so[0x2b8f1cdf00fb] ======= Memory map: ======== And finally a lot of these: [Sat Mar 13 19:20:27 2010] [error] could not make child process 733 exit, attempting to continue anyway [Sat Mar 13 19:20:27 2010] [error] could not make child process 24560 exit, attempting to continue anyway [Sat Mar 13 19:20:27 2010] [error] could not make child process 31384 exit, attempting to continue anyway I am also noticing one or two lines like this: [Mon Mar 15 01:17:26 2010] [notice] child pid 20765 exit signal Segmentation fault (11) Please help me shed some light on this. Thanks !

  Read the article

• Prob comparing pointers and integer in C

  - by Dimitri

  Hi I have a problem with this code. When i am using this function I have no warnings. : void handler(int sig){ switch(sig) { case SIGINT : { click++; fprintf(stdout,"SIGINT recu\n"); if( click == N){ exit(0); } } case SIGALRM : fprintf(stdout,"SIGALRM received\n"); exit(0); case SIGTERM: fprintf(stdout,"SIGTERM received\n"); exit(0); } } But when i rewrite the function with this new version, I have a " comparison between pointer and integer" warning on the if statement: void handler( int sig){ printf("Signal recu\n"); if( signal == SIGINT){ click++; fprintf(stdout,"SIGINT received; Click = %d\n",click); if(click == N){ fprintf(stdout,"Exiting with SIGINT\n"); exit(0); } } else if(signal == SIGALRM){ fprintf(stdout,"SIGALRM received\n"); exit(0); } else if(signal == SIGTERM){ fprintf(stdout,"SIGTERM received\n"); exit(0); } Can someone tell me where is the prob?

  Read the article

• Is there programming language with better approach for switch's break statements ?

  - by Vitaly Polonetsky

  It's the same syntax in a way too many languages: switch (someValue) { case OPTION_ONE: case OPTION_LIKE_ONE: case OPTION_ONE_SIMILAR: doSomeStuff1(); break; // EXIT the switch case OPTION_TWO_WITH_PRE_ACTION: doPreActionStuff2(); // the default is to CONTINUE to next case case OPTION_TWO: doSomeStuff2(); break; // EXIT the switch case OPTION_THREE: doSomeStuff3(); break; // EXIT the switch } Now all you know that break statements are required, because the switch will continue to the next case when break statement is missing. We have an example of that with OPTION_LIKE_ONE, OPTION_ONE_SIMILAR and OPTION_TWO_WITH_PRE_ACTION. The problem is that we only need this "skip to next case" very very very rarely. And very often we put break at the end of case. It very easy for a beginner to forget about it. And one of my C teachers even explained it to us as if it was a bug in C language (don't want to talk about it :) I would like to ask if there are any other languages that I don't know of (or forgot about) that handle switch/case like this: switch (someValue) { case OPTION_ONE: continue; // CONTINUE to next case case OPTION_LIKE_ONE: continue; // CONTINUE to next case case OPTION_ONE_SIMILAR: doSomeStuff1(); // the default is to EXIT the switch case OPTION_TWO_WITH_PRE_ACTION: doPreActionStuff2(); continue; // CONTINUE to next case case OPTION_TWO: doSomeStuff2(); // the default is to EXIT the switch case OPTION_THREE: doSomeStuff3(); // the default is to EXIT the switch } The second question: is there any historical meaning to why it is like this in C? May be continue to next case was used far more often than we use it these days ?

  Read the article

• Fixing Robocopy for SQL Server Jobs

  - by Most Valuable Yak (Rob Volk)

  Robocopy is one of, if not the, best life-saving/greatest-thing-since-sliced-bread command line utilities ever to come from Microsoft.  If you're not using it already, what are you waiting for? Of course, being a Microsoft product, it's not exactly perfect. ;)  Specifically, it sets the ERRORLEVEL to a non-zero value even if the copy is successful.  This causes a problem in SQL Server job steps, since non-zero ERRORLEVELs report as failed. You can work around this by having your SQL job go to the next step on failure, but then you can't determine if there was a genuine error.  Plus you still see annoying red X's in your job history.  One way I've found to avoid this is to use a batch file that runs Robocopy, and I add some commands after it (in red): robocopy d:\backups \\BackupServer\BackupFolder *.bak rem suppress successful robocopy exit statuses, only report genuine errors (bitmask 16 and 8 settings)set/A errlev="%ERRORLEVEL% & 24" rem exit batch file with errorlevel so SQL job can succeed or fail appropriatelyexit/B %errlev% (The REM statements are simply comments and don't need to be included in the batch file) The SET command lets you use expressions when you use the /A switch.  So I set an environment variable "errlev" to a bitwise AND with the ERRORLEVEL value. Robocopy's exit codes use a bitmap/bitmask to specify its exit status.  The bits for 1, 2, and 4 do not indicate any kind of failure, but 8 and 16 do.  So by adding 16 + 8 to get 24, and doing a bitwise AND, I suppress any of the other bits that might be set, and allow either or both of the error bits to pass. The next step is to use the EXIT command with the /B switch to set a new ERRORLEVEL value, using the "errlev" variable.  This will now return zero (unless Robocopy had real errors) and allow your SQL job step to report success. This technique should also work for other command-line utilities.  The only issues I've found is that it requires the commands to be part of a batch file, so if you use Robocopy directly in your SQL job step you'd need to place it in a batch.  If you also have multiple Robocopy calls, you'll need to place the SET/A command ONLY after the last one.  You'd therefore lose any errors from previous calls, unless you use multiple "errlev" variables and AND them together. (I'll leave this as an exercise for the reader) The SET/A syntax also permits other kinds of expressions to be calculated.  You can get a full list by running "SET /?" on a command prompt.

  Read the article

• AuthnRequest Settings in OIF / SP

  - by Damien Carru

  In this article, I will list the various OIF/SP settings that affect how an AuthnRequest message is created in OIF in a Federation SSO flow. The AuthnRequest message is used by an SP to start a Federation SSO operation and to indicate to the IdP how the operation should be executed: How the user should be challenged at the IdP Whether or not the user should be challenged at the IdP, even if a session already exists at the IdP for this user Which NameID format should be requested in the SAML Assertion Which binding (Artifact or HTTP-POST) should be requested from the IdP to send the Assertion Which profile should be used by OIF/SP to send the AuthnRequest message Enjoy the reading! Protocols The SAML 2.0, SAML 1.1 and OpenID 2.0 protocols define different message elements and rules that allow an administrator to influence the Federation SSO flows in different manners, when the SP triggers an SSO operation: SAML 2.0 allows extensive customization via the AuthnRequest message SAML 1.1 does not allow any customization, since the specifications do not define an authentication request message OpenID 2.0 allows for some customization, mainly via the OpenID 2.0 extensions such as PAPE or UI SAML 2.0 OIF/SP allows the customization of the SAML 2.0 AuthnRequest message for the following elements: ForceAuthn: Boolean indicating whether or not the IdP should force the user for re-authentication, even if the user has still a valid session By default set to false IsPassive Boolean indicating whether or not the IdP is allowed to interact with the user as part of the Federation SSO operation. If false, the Federation SSO operation might result in a failure with the NoPassive error code, because the IdP will not have been able to identify the user By default set to false RequestedAuthnContext Element indicating how the user should be challenged at the IdP If the SP requests a Federation Authentication Method unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the NoAuthnContext error code By default missing NameIDPolicy Element indicating which NameID format the IdP should include in the SAML Assertion If the SP requests a NameID format unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the InvalidNameIDPolicy error code If missing, the IdP will generally use the default NameID format configured for this SP partner at the IdP By default missing ProtocolBinding Element indicating which SAML binding should be used by the IdP to redirect the user to the SP with the SAML Assertion Set to Artifact or HTTP-POST By default set to HTTP-POST OIF/SP also allows the administrator to configure the server to: Set which binding should be used by OIF/SP to redirect the user to the IdP with the SAML 2.0 AuthnRequest message: Redirect or HTTP-POST By default set to Redirect Set which binding should be used by OIF/SP to redirect the user to the IdP during logout with SAML 2.0 Logout messages: Redirect or HTTP-POST By default set to Redirect SAML 1.1 The SAML 1.1 specifications do not define a message for the SP to send to the IdP when a Federation SSO operation is started. As such, there is no capability to configure OIF/SP on how to affect the start of the Federation SSO flow. OpenID 2.0 OpenID 2.0 defines several extensions that can be used by the SP/RP to affect how the Federation SSO operation will take place: OpenID request: mode: String indicating if the IdP/OP can visually interact with the user checkid_immediate does not allow the IdP/OP to interact with the user checkid_setup allows user interaction By default set to checkid_setup PAPE Extension: max_auth_age : Integer indicating in seconds the maximum amount of time since when the user authenticated at the IdP. If MaxAuthnAge is bigger that the time since when the user last authenticated at the IdP, then the user must be re-challenged. OIF/SP will set this attribute to 0 if the administrator configured ForceAuthn to true, otherwise this attribute won't be set Default missing preferred_auth_policies Contains a Federation Authentication Method Element indicating how the user should be challenged at the IdP By default missing Only specified in the OpenID request if the IdP/OP supports PAPE in XRDS, if OpenID discovery is used. UI Extension Popup mode Boolean indicating the popup mode is enabled for the Federation SSO By default missing Language Preference String containing the preferred language, set based on the browser's language preferences. By default missing Icon: Boolean indicating if the icon feature is enabled. In that case, the IdP/OP would look at the SP/RP XRDS to determine how to retrieve the icon By default missing Only specified in the OpenID request if the IdP/OP supports UI Extenstion in XRDS, if OpenID discovery is used. ForceAuthn and IsPassive WLST Command OIF/SP provides the WLST configureIdPAuthnRequest() command to set: ForceAuthn as a boolean: In a SAML 2.0 AuthnRequest, the ForceAuthn field will be set to true or false In an OpenID 2.0 request, if ForceAuthn in the configuration was set to true, then the max_auth_age field of the PAPE request will be set to 0, otherwise, max_auth_age won't be set IsPassive as a boolean: In a SAML 2.0 AuthnRequest, the IsPassive field will be set to true or false In an OpenID 2.0 request, if IsPassive in the configuration was set to true, then the mode field of the OpenID request will be set to checkid_immediate, otherwise set to checkid_setup Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will require the IdP to re-challenge the user, even if the user is already authenticated: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command:configureIdPAuthnRequest(partner="AcmeIdP", forceAuthn="true") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="true" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> To display or delete the ForceAuthn/IsPassive settings, perform the following operatons: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command: To display the ForceAuthn/IsPassive settings on the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", displayOnly="true") To delete the ForceAuthn/IsPassive settings from the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", delete="true") Exit the WLST environment:exit() Requested Fed Authn Method In my earlier "Fed Authentication Method Requests in OIF / SP" article, I discussed how OIF/SP could be configured to request a specific Federation Authentication Method from the IdP when starting a Federation SSO operation, by setting elements in the SSO request message. WLST Command The OIF WLST commands that can be used are: setIdPPartnerProfileRequestAuthnMethod() which will configure the requested Federation Authentication Method in a specific IdP Partner Profile, and accepts the following parameters: partnerProfile: name of the IdP Partner Profile authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it setIdPPartnerRequestAuthnMethod() which will configure the specified IdP Partner entry with the requested Federation Authentication Method, and accepts the following parameters: partner: name of the IdP Partner authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it This applies to SAML 2.0 and OpenID 2.0 protocols. See the "Fed Authentication Method Requests in OIF / SP" article for more information. Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will request the IdP to use a mechanism mapped to the urn:oasis:names:tc:SAML:2.0:ac:classes:X509 Federation Authentication Method to authenticate the user: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerRequestAuthnMethod() command:setIdPPartnerRequestAuthnMethod("AcmeIdP", "urn:oasis:names:tc:SAML:2.0:ac:classes:X509") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/>   <samlp:RequestedAuthnContext Comparison="minimum">      <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">         urn:oasis:names:tc:SAML:2.0:ac:classes:X509      </saml:AuthnContextClassRef>   </samlp:RequestedAuthnContext></samlp:AuthnRequest> NameID Format The SAML 2.0 protocol allows for the SP to request from the IdP a specific NameID format to be used when the Assertion is issued by the IdP. Note: SAML 1.1 and OpenID 2.0 do not provide such a mechanism Configuring OIF The administrator can configure OIF/SP to request a NameID format in the SAML 2.0 AuthnRequest via: The OAM Administration Console, in the IdP Partner entry The OIF WLST setIdPPartnerNameIDFormat() command that will modify the IdP Partner configuration OAM Administration Console To configure the requested NameID format via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify In the Authentication Request NameID Format dropdown box with one of the values None The NameID format will be set Default Email Address The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress X.509 Subject The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName Windows Name Qualifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName Kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos Transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient Unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified Custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format Persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent I selected Email Address in this example Save WLST Command To configure the requested NameID format via the OIF WLST setIdPPartnerNameIDFormat() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerNameIDFormat() command:setIdPPartnerNameIDFormat("PARTNER", "FORMAT", customFormat="CUSTOM") Replace PARTNER with the IdP Partner name Replace FORMAT with one of the following: orafed-none The NameID format will be set Default orafed-emailaddress The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress orafed-x509 The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName orafed-windowsnamequalifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName orafed-kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos orafed-transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient orafed-unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified orafed-custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format orafed-persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent customFormat will need to be set if the FORMAT is set to orafed-custom An example would be:setIdPPartnerNameIDFormat("AcmeIdP", "orafed-emailaddress") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> After the changes performed either via the OAM Administration Console or via the OIF WLST setIdPPartnerNameIDFormat() command where Email Address would be requested as the NameID Format, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="false" IsPassive="false" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy Format="urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress" AllowCreate="true"/></samlp:AuthnRequest> Protocol Binding The SAML 2.0 specifications define a way for the SP to request which binding should be used by the IdP to redirect the user to the SP with the SAML 2.0 Assertion: the ProtocolBinding attribute indicates the binding the IdP should use. It is set to: Either urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST for HTTP-POST Or urn:oasis:names:tc:SAML:2.0:bindings:Artifact for Artifact The SAML 2.0 specifications also define different ways to redirect the user from the SP to the IdP with the SAML 2.0 AuthnRequest message, as the SP can send the message: Either via HTTP Redirect Or HTTP POST (Other bindings can theoretically be used such as Artifact, but these are not used in practice) Configuring OIF OIF can be configured: Via the OAM Administration Console or the OIF WLST configureSAMLBinding() command to set the Assertion Response binding to be used Via the OIF WLST configureSAMLBinding() command to indicate how the SAML AuthnRequest message should be sent Note: the binding for sending the SAML 2.0 AuthnRequest message will also be used to send the SAML 2.0 LogoutRequest and LogoutResponse messages. OAM Administration Console To configure the SSO Response/Assertion Binding via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify Check the "HTTP POST SSO Response Binding" box to request the IdP to return the SSO Response via HTTP POST, otherwise uncheck it to request artifact Save WLST Command To configure the SSO Response/Assertion Binding as well as the AuthnRequest Binding via the OIF WLST configureSAMLBinding() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureSAMLBinding() command:configureSAMLBinding("PARTNER", "PARTNER_TYPE", binding, ssoResponseBinding="httppost") Replace PARTNER with the Partner name Replace PARTNER_TYPE with the Partner type (idp or sp) Replace binding with the binding to be used to send the AuthnRequest and LogoutRequest/LogoutResponse messages (should be httpredirect in most case; default) httppost for HTTP-POST binding httpredirect for HTTP-Redirect binding Specify optionally ssoResponseBinding to indicate how the SSO Assertion should be sent back httppost for HTTP-POST binding artifactfor for Artifact binding An example would be:configureSAMLBinding("AcmeIdP", "idp", "httpredirect", ssoResponseBinding="httppost") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration which requests HTTP-POST from the IdP to send the SSO Assertion. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> In the next article, I will cover the various crypto configuration properties in OIF that are used to affect the Federation SSO exchanges.Cheers,Damien Carru

  Read the article

• How To Run A Shell Script Again And Again Having X Interval Of Time?

  - by Muhammad Hassan

  I have a shell script in my Ubuntu Server 14.04 LTS at ./ShellScript.sh. I setup /etc/rc.local to run the shell script after boot but before login using below code. Run this: sudo nano /etc/rc.local then add following and save. #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. #!/bin/bash ./ShellScript.sh exit 0 Now I want to run/execute this shell script again and again having 15min of time interval between every run after boot but before login. So Can I do it? Update 1:) When I run crontab -e then I got the following. Now What to do? no crontab for root - using an empty one Select an editor. To change later, run 'select-editor'. 1. /bin/ed 2. /bin/nano <---- easiest 3. /usr/bin/vim.basic 4. /usr/bin/vim.tiny Choose 1-4 [2]: After selecting 2, I got crontab: "/usr/bin/sensible-editor" exited with status 2 UPDATE 2:) Update ShellScript.sh like below... #!/bin/bash # Testing ShellScript... while true do echo "ShellScript Start Running..." ********************************** All My Shell Script Codes/Script/Commands ********************************** echo "ShellScript End Running..." exit 0 sleep 900 done Then Run this: sudo nano /etc/rc.local then add following and save. #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. sh ./ShellScript.sh & exit 0

  Read the article

• openssl/rand.h header file not found

  - by Arun Reddy Kandoor

  I have installed libssl-dev package but that did not install the include files. How do I get the openssl include files? Appreciate your help. Checking for program g++ or c++ : /usr/bin/g++ Checking for program cpp : /usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /usr/bin/ranlib Checking for g++ : ok Checking for node path : ok /usr/bin/node Checking for node prefix : ok /usr Checking for header openssl/rand.h : not found /home/arun/Documents/webserver/node_modules/bcrypt/wscript:30: error: the configuration failed (see '/home/arun/Documents/webserver/node_modules/bcrypt/build/config.log') npm ERR! error installing [email protected] npm ERR! [email protected] preinstall: `node-waf clean || (exit 0); node-waf configure build` npm ERR! `sh "-c" "node-waf clean || (exit 0); node-waf configure build"` failed with 1 npm ERR! npm ERR! Failed at the [email protected] preinstall script. npm ERR! This is most likely a problem with the bcrypt package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node-waf clean || (exit 0); node-waf configure build npm ERR! You can get their info via: npm ERR! npm owner ls bcrypt npm ERR! There is likely additional logging output above. npm ERR! npm ERR! System Linux 3.8.0-32-generic npm ERR! command "node" "/usr/bin/npm" "install" npm ERR! cwd /home/arun/Documents/webserver npm ERR! node -v v0.6.12 npm ERR! npm -v 1.1.4 npm ERR! code ELIFECYCLE npm ERR! message [email protected] preinstall: `node-waf clean || (exit 0); node-waf configure build` npm ERR! message `sh "-c" "node-waf clean || (exit 0); node-waf configure build"` failed with 1 npm ERR! errno {} npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/arun/Documents/webserver/npm-debug.log npm not ok

  Read the article

• A process serving application pool 'X' reported a failure. The process id was 'Y'. The data field c

  - by born to hula

  I have a WCF Web Service which is kept under an Application Pool on IIS. Lately I've been getting "Service Unavaiable" when I'm trying to make calls to this Web Service. The first thing I tried to do was restarting the Application Pool. I did it and after a couple of seconds, it crashed and stopped. Looking at the Event Viewer, I found these messages, which by the moment couldn't help me to find where the problem is. A process serving application pool 'X' reported a failure. The process id was '11616'. The data field contains the error number. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. After getting a couple of these, I got this one: Application pool 'X' is being automatically disabled due to a series of failures in the process(es) serving that application pool. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I've already checked permissions and Application Pool configurations but everything seems to be OK. Have anyone been through this? Thanks in advance.

  Read the article

• Wake up thread blocked on accept() call

  - by selbie

  Sockets on Linux question I have a worker thread that is blocked on an accept() call. It simply waits for an incoming network connection, handles it, and then returns to listening for the next connection. When it is time for the program to exit, how do I signal this network worker thread (from the main thread) to return from the accept() call while still being able to gracefully exit its loop and handle it's cleanup code. Some things I tried: 1. pthread_kill to send a signal. Feels kludgy to do this, plus it doesn't reliably allow the thread to do it's shutdown logic. Also makes the program terminate as well. I'd like to avoid signals if at all possible. pthread_cancel. Same as above. It's a harsh kill on the thread. That, and the thread may be doing something else. Closing the listen socket from the main thread in order to make accept() abort. This doesn't reliably work. Some constraints: If the solution involves making the listen socket non-blocking, that is fine. But I don't want to accept a solution that involves the thread waking up via a select call every few seconds to check the exit condition. The thread condition to exit may not be tied to the process exiting. Essentially, the logic I am going for looks like this. void* WorkerThread(void* args) { DoSomeImportantInitialization(); // initialize listen socket and some thread specific stuff while (HasExitConditionBeenSet()==false) { listensize = sizeof(listenaddr); int sock = accept(listensocket, &listenaddr, &listensize); // check if exit condition has been set using thread safe semantics if (HasExitConditionBeenSet()) { break; } if (sock < 0) { printf("accept returned %d (errno==%d)\n", sock, errno); } else { HandleNewNetworkCondition(sock, &listenaddr); } } DoSomeImportantCleanup(); // close listen socket, close connections, cleanup etc.. return NULL; } void SignalHandler(int sig) { printf("Caught CTRL-C\n"); } void NotifyWorkerThreadToExit(pthread_t thread_handle) { // signal thread to exit } int main() { void* ptr_ret= NULL; pthread_t workerthread_handle = 0; pthread_create(&workerthread, NULL, WorkerThread, NULL); signal(SIGINT, SignalHandler); sleep((unsigned int)-1); // sleep until the user hits ctrl-c printf("Returned from sleep call...\n"); SetThreadExitCondition(); // sets global variable with barrier that worker thread checks on // this is the function I'm stalled on writing NotifyWorkerThreadToExit(workerthread_handle); // wait for thread to exit cleanly pthread_join(workerthread_handle, &ptr_ret); DoProcessCleanupStuff(); }

  Read the article

• What does error 0xC02020C4 mean in SSIS?

  I get this error with this description. Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

  Read the article

• Sounds for build error/success in Visual C++?

  - by jwfearn

  On long Visual C++ builds, it would be really helpful to hear some sort of (optional) sounds for such build/compile results as: individual compile error file compile success/failure build success/failure batch build success/failure Does anyone know how to enable sounds for these kinds of build occurrences in Visual C++ (especially Visual C++ 2008 on Vista)?

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >