Search Results

Search found 5205 results on 209 pages for 'extra'.

Page 53/209 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • How can I use a CanoScan N640Pex scanner over a USB/parallel cable?

    - by detly
    I have an old CanoScan N640Pex flat bed scanner and a USB-to-parallel port cable through which I can connect it to my PC. Unfortunately neither Simple Scan nor XSane detect the scanner. I'm running Ubuntu 12.04 (plus updates and backports) with kernel 3.2.0-31-generic. dmesg tells me this when I plus the cable in: [256411.641910] usb 7-1: new full-speed USB device number 10 using uhci_hcd [256411.872392] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [256411.872417] usbcore: registered new interface driver usblp lsusb shows this device for my cable: Bus 007 Device 010: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port The device node created is /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Sep 9 17:46 /dev/usb/lp0 There is no extra information from any of these commands when I attach the scanner to the cable and power it on, though. I suspect I might need to change something in /etc/sane.d/canon_pp.conf, but I have no idea what to put for the ieee1284 line, since there is pretty much zero documentation for that parameter. So how can I get it to work?

    Read the article

  • How to use different input language for different active (application) windows?

    - by anvo
    I'm working under 12.04 and suppose I have a Firefox windows active (or in foreground) with English as input language and I need to type a document in other language using some text editor. With the text editor in foreground (or active) and the input language set to a non-English one, when I bring Firefox in foreground (or making it active) the input language remains set to the non-English and the language flag does not switch to English (as it would be expected, since I do not alter the language during the whole Firefox session). Because of this, I have to make extra moves and change the input language manually every time I switch from the text editor to Firefox and back to text editor. This was not happening with 10.04, and each application windows had the corresponding input language set to its default or previous session every time I was bringing it to the foreground! How will I make 12.04 to behave the same way?

    Read the article

  • Encryption password

    - by George
    I am running Ubuntu 12.04 LTS I thought that everything in my Documents folder was being backed up by Ubuntu1, as everytime I put a file in my documents folder a box popped up stating backing up file. When I looked at the Left hand list of programmes on my desktop screen there was an extra Box in the list. Clicked the Box and it stated encryption Password required. It seems the latest files have not been backed up as an Encryption Password is required. Can anyone explain for me, what is this Encription Password and how do I get it.

    Read the article

  • How to get KeePass to properly work with Chromium?

    - by Tom
    The two-channel auto-type obfuscation feature of KeePass doesn't work for me with Chromium (on Ubuntu 12.04 64 bits). However, it works just fine with Firefox. Dows anyone know how to fix this? Textboxes in web forms in Chromium seems to have something special that causes this feature to fail. Only some of the username/password characters are being auto-typed. This might be related to this: if I select an entry in KeePass and click "Copy User Name", I can paste it fine with Ctrl+V in any textbox in Firefox, but I can't on Chromium. However, text copied using Ctrl+C from a regular text file (say, from gedit), can be pasted fine on both browsers. What may be wrong? I wouldn't like to deactive this feature for all the entries in my keepass files as I use them on Windows too and they work just fine there (even on Google Chrome for Windows). This feature gives an appreciated extra security measure against spyware/keyloggers.

    Read the article

  • Organisation GitHub account. Secure to use for personal projects?

    - by Mackey18
    So a large client of mine gave me access to their Organisation GitHub account. With it came a login for myself (on github.companyname.com) and of course access to certain repos on their company account (by switching the user to the company via the button in the top left). Now I was wondering, since I can create private repos for myself, is it safe for me to use these for non-related projects or can the company administrators access my user's repos despite being private? My understanding of Github is limited as it is, so this extra layer of complexity from the organisation account isn't helping too much. Thanks,Mike

    Read the article

  • How to fend off external interuptions?

    - by Demian Kasier
    I want to keep my focus at work, but I am constontly interupted. examples: - the boss asks something to the whole team. - a coleague asks something about a piece of code I wrote - something funny on the radio - smalltalk among coleages with a joke in between. - ... As extra info: We are a team of 6 developpers in one room, with sales and suits constantly coming over to ask and tell us things we must and mustn't do. So how do you keep you focus and attention to your work? so you can get some things done, instead of answering to everyone and everything that interupts you?

    Read the article

  • Not detecting HDD after installing Ubuntu 12.04!

    - by Arthur
    After installing Ubuntu 12.04, which I'm using right now and it works great, my extra hard drive was detected the first time I turned on my computer but then it does not show anymore on my Home Folder, when I run the Disk Utility says that has a few errors but when I try to fix it, says that hard drive is busy and cannot do anything else. I've unmounted it and mounted again but nothing happens. Do you know what can be going on? Cause the first time that I was able to see my hard drive it had all the files I have, but I don't know if deleting the partition will format the whole hard drive or just the ubuntu files. THANKS in advance! BY THE WAY, I'm new to Ubuntu... :S

    Read the article

  • How are USB ports related to the computer power, and why would they cause my computer to freeze?

    - by BDuelz
    I have an issue with my new Toshiba laptop. Whenever I plug in an external USB device, if the laptop is not plugged in to the wall, the laptop freezes. However, nothing happens if the laptop is plugged in to the wall. When I say the laptop freezes, I mean it really freezes. The only way to recover is to hard reboot. My question is, what could be causing this? Could it be the extra power drain from the sub devices that causes this (even the simplest flash drives cause a freeze)? Please help me out, it's very annoying. Thanks

    Read the article

  • Wordpress does not create directories?

    - by Marcappuccino
    First I will just tell you how my wordpress hierarchy looks like: /var/www has all of the wordpress files, which is different from how it is normally set up as /var/www/wordpress (symlinked to /usr/share/wordpress). So var/www contains all of the files that /usr/share/wordpress would have, and /usr/share/wordpress is symlinked to /var/www, with an extra /var/www/wordpress symlinked to /var/www to prevent possible compatibility issues. When uploading a file like a favicon or a .zip-ped theme, everything works fine, and when checking if the theme/favicon is uploaded, wordpress shows that it is, and points to a directory that it thinks that it had created, like http:/localhost/wp-content/uploads/2012/..., which it had not, because the uploads folder is empty! And so there is a broken link on the internet and the theme is displayed but it has just plain text (because it had reverted to a plain theme I think) Please help! I am sorry for such a long post but this is really quite a troublesome problem. I have chowned /var/www and /usr/share/wordpress to www-data.

    Read the article

  • Why did 13.10 break my custom keyboard layout?

    - by con-f-use
    I was using a custom keyboard layout. Basically I modified the us-mac layout to fit my ideal of a math-heavy version of the regular us layout that also throws German umlauts into mix. It went well and worked marvelously for 6 consecutive versions of Ubuntu. Today's version Upgrade (from 13.04 to 13.10) broke that streak. I now have the usual crappy Macintosh-Layout. Now xkb just ignores my layout and all of the other changes I make in /usr/share/X11/xkb/symbols/us (tried to switch '0' and '9' everywhere and rebooted - no effect). Why is that? I suspect I have to do an extra step now for the changes to take effect or something like that. Anyone care to point me in the right direction?

    Read the article

  • Handling (many) multiple projects in Git in an enterprise environment

    - by Michael K
    One of the advantages of older version control systems such as CVS and SVN in enterprise development is that anyone can connect to source control and see all the projects that the company has. This can make it easier to get a high level view of what kid of development is happening outside your sprint and also keeps everything in one place and easy to find. However, distributed version control systems (Git, specifically) use the repository as their base unit. They work best with one project (or several closely related projects) per repository. This makes repository management more difficult in most enterprise environments where it is not unusual to have more than 25-50 projects to support. As far as I have been able to determine, you have to keep a list somewhere else of all the repos you have. There is software available, like GitHub, that help, but that still is an extra step beyond a single connection string and listing the contents of the repository. What is the best way to deal with the complexity of multiple repositories?

    Read the article

  • Hadoop:Only master node does the work

    - by user287722
    I've setup a Hadoop 2.2 cluster with 1 master node(namenode and secondary namenode) and 3 slave nodes(datanode and namenode on each one).All of the machines use Linux Mint 64bit. When I run my MapReduce program, writen in Java, I can only see that master node is using extra CPU and RAM. Slave nodes are not doing a thing. I've checked the logs from all of the namenodes and there is nothing wrong with the namenodes on slave nodes. Resource Manager is running and all of the slave nodes can see the Resource Manager. I used this http://n0where.net/hadoop-2-2-multi-node-cluster-setup/ tutorial to configure my nodes. Datanodes are working in terms of distributed data storing but I can't see any indication of distributed data processing. Do I have to configure the xml configuration files in some other way so all of the machines will process data while I'm running my MapReduce Job?

    Read the article

  • how do i make maximum minimum and average score statistic in this code? [on hold]

    - by goldensun player
    i wanna out put the maximum minimum and average score as a statistic category under the student ids and grades in the output file. how do i do that? here is the code: #include "stdafx.h" #include <iostream> #include <string> #include <fstream> #include <assert.h> using namespace std; int openfiles(ifstream& infile, ofstream& outfile); void Size(ofstream&, int, string); int main() { int num_student = 4, count, length, score2, w[6]; ifstream infile, curvingfile; char x; ofstream outfile; float score; string key, answer, id; do { openfiles(infile, outfile); // function calling infile >> key; // answer key for (int i = 0; i < num_student; i++) // loop over each student { infile >> id; infile >> answer; count = 0; length = key.size(); // length represents number of questions in exam from exam1.dat // size is a string function.... Size (outfile, length, answer); for (int j = 0; j < length; j++) // loop over each question { if (key[j] == answer[j]) count++; } score = (float) count / length; score2 = (int)(score * 100); outfile << id << " " << score2 << "%"; if (score2 >= 90)//<-----w[0] outfile << "A" << endl; else if (score2 >= 80)//<-----w[1] outfile << "B" << endl; else if (score2 >= 70)//<-----w[2] outfile << "C" << endl; else if (score2 >= 60)//<-----w[3] outfile << "D" << endl; else if (score2 >= 50)//<-----w[4] outfile << "E" << endl; else if (score2 < 50)//<-----w[5] outfile << "F" << endl; } cout << "Would you like to attempt a new trial? (y/n): "; cin >> x; } while (x == 'y' || x == 'Y'); return 0; } int openfiles(ifstream& infile, ofstream& outfile) { string name1, name2, name3, answerstring, curvedata; cin >> name1; name2; name3; if (name1 == "exit" || name2 == "exit" || name3 == "exit" ) return false; cout << "Input the name for the exam file: "; cin >> name1; infile.open(name1.c_str()); infile >> answerstring; cout << "Input the name for the curving file: "; cin >> name2; infile.open(name2.c_str()); infile >> curvedata; cout << "Input the name for the output: "; cin >> name3; outfile.open(name3.c_str()); return true; } void Size(ofstream& outfile, int length, string answer) { bool check;// extra answers, lesser answers... if (answer.size() > length) { outfile << "Unnecessary extra answers"; } else if (answer.size() < length) { outfile << "The remaining answers are incorrect"; } else { check = false; }; } and how do i use assert for preconditions and post conditional functions? i dont understand this that well...

    Read the article

  • "Errors while handling" kernel packages after dist-upgrade

    - by WOLF L?MBERT
    I did an apt-get dist-upgrade, now everytime I do something using apt-get, e.g. installing something, it gives me that there are errors while handling the following packages: linux-image-extra-3.13.0-35-generic linux-image-generic linux-generic My system still works correctly, but is this normal? And what should I do? Should I do anything? Have I done the wrong thing by doing a dist-upgrade? (Beginner-like instructions please, I'm not an expert. Using Xubuntu 14.04.)

    Read the article

  • Can't control connection bit rate using iwconfig with Atheros TL-WN821N (AR7010)

    - by Paul H
    I'm trying to reduce the connection bit rate on my Atheros TP-Link TL-WN821N v3 usb wifi adapter due to frequent instability issues (reported connection speed goes down to 1Mb/s and I have to physically reconnect the adapter to regain a connection). I know this is a common problem with this device, and I have tried everything I can think of to fix it, including using drivers from linux-backports; compiling and installing a custom firmware (following instructions on https://wiki.debian.org/ath9k_htc#fw-free) and (as a last resort) using ndiswrapper. When using ndiswrapper, the wifi adapter is stable and operates in g mode at 54Mb/s (whilst when using the default ath9k_htc module, the adapter connects in n mode and the bit rate fluctuates constantly). Unfortunately, with this setup I have to run my processor using only one core, since using SMP with ndiswrapper causes a kernel oops on my system. So I want to lock my bit rate to 54Mb/s (or less, if need be) for connection stability, using the ath9k_htc module. I've tried 'sudo iwconfig wlan0 rate 54M'; the command runs with no error but when I check the bit rate with 'sudo iwlist wlan0 bitrate' the command returns: wlan0 unknown bit-rate information. Current Bit Rate:78 Mb/s Any ideas? Here's some info (hopefully relevant) on my setup: Xubuntu (12.04.3) 64bit (kernel 3.2.0-55.85-generic) using Network Manager. My Router is from Virgin Media, the VMDG480. lshw -C network : *-network description: Wireless interface physical id: 1 bus info: usb@1:4 logical name: wlan0 serial: 74:ea:3a:8f:16:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=ath9k_htc driverversion=3.2.0-55 firmware=1.3 ip=192.168.0.9 link=yes multicast=yes wireless=IEEE 802.11bgn lsusb -v: Bus 001 Device 003: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0cf3 Atheros Communications, Inc. idProduct 0x7015 TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] bcdDevice 2.02 iManufacturer 16 ATHEROS iProduct 32 UB95 iSerial 48 12345 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 60 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 6 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) iwlist wlan0 scanning: wlan0 Scan completed : Cell 01 - Address: C4:3D:C7:3A:1F:5D Channel:1 Frequency:2.412 GHz (Channel 1) Quality=37/70 Signal level=-73 dBm Encryption key:on ESSID:"my essid" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=00000070cca77186 Extra: Last beacon: 5588ms ago IE: Unknown: 0007756E69636F726E IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 2D1AFC181BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1601080400000000000000000000000000000000000000 IE: Unknown: DD7E0050F204104A0001101044000102103B00010310470010F99C335D7BAC57FB00137DFA79600220102100074E657467656172102300074E6574676561721024000631323334353610420007303030303030311054000800060050F20400011011000743473331303144100800022008103C0001011049000600372A000120 IE: Unknown: DD090010180203F02C0000 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 iwconfig: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"my essid" Mode:Managed Frequency:2.412 GHz Access Point: C4:3D:C7:3A:1F:5D Bit Rate=78 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0,

    Read the article

  • Is there an application or method to log of data transfers?

    - by Gaurav_Java
    My friend asked me for some files that I let him take from my system. I did not see he doing that. Then I was left with a doubt: what extra files or data did he take from my system? I was thinking is here any application or method which shows what data is copied to which USB (if name available then shows name or otherwise device id) and what data is being copied to Ubuntu machine . It is some like history of USB and System data. I think this feature exists in KDE This will really useful in may ways. It provides real time and monitoring utility to monitor USB mass storage devices activities on any machine.

    Read the article

  • How do I implement powerups for my Breakout clone?

    - by Eva
    I'm making a simple Breakout clone in Python that will have very many powerups/powerdowns (so far I came up with 26). Some will affect the paddle (paddle missile, two paddles, short paddle, etc.), some will affect the ball (slow ball, destructo-ball, invisible ball, etc.), some will affect the bricks (brick scramble, move up, bricks indestructible, etc.), and some will affect other game aspects (extra life, more points, less points, etc.). I'm pretty sure I have the code to draw the falling powerups and test for collisions with the paddle down, but I'm confused about how to code the effects of the powerups. Since there are very many powerups, it seemed inefficient to add specific methods to each component as done in this tutorial. However, I can't think of an other ways to implement the powerups. I found a page that hints at some way to design powerup behavior using classes, but I'm at a loss for how to do that. (A short example would help.) Please give me a short code example of another way to implement the effects of the powerups.

    Read the article

  • Is it normal to feel bad when someone insults a programming language? [closed]

    - by iammilind
    Few examples before the question: "A language is just a tool; Better to worry only about the concept." "C++ is just an object oriented language." "Java is more about the libraries and less about programming." "C# is just a Microsoft's version of Java with some extra things from C++." "Python is a scripting language used mainly for testing purpose." ... All these statements are made knowingly or unknowingly from my colleagues/friends and I often get to hear them. I feel bad when someone brings down any programming language. I don't know how to respond. Is there any one liner to enlighten those people?

    Read the article

  • How do I do a B43 Legacy install on Ubuntu 11.10?

    - by Gozzy
    I recently installed ubuntu onto an extra hard drive and everything booted correctly. However, my Linksys wireless card is not working. I went though all the forums and walk throughs and I know that I need to install the b43 legacy firmware to get the card to work. When I try to install the files, I keep getting the message in Terminal saying "No such file or directory" for every file i need to run. It's Ubuntu 11.10 on a dell optiplex gx280. Also, the "pool" file that is supposed to be on the file system is not there

    Read the article

  • Is JScript dying? If so, where should I go? [closed]

    - by David Is Not Here
    I recently poked around Google for a little bit, looking for information about coding JScript. It's very sparse, which surprised me -- it took a link to a link to find Microsoft's own reference, which appears to omit most if not all references to console-based scripting that extends past Javascript. I'm working with the console here, not a webpage, so input and output seems very different than what Microsoft explains. If JScript is dying (and it appears to be so), where do I go from here? VBScript? My options are limited because the computers I'm using this on are carefully patrolled for new software. JScript's similarity to JavaScript was the biggest reason I had chosen it for porting over some of my prior work. I'm specifically looking for, at best, a console scripting language that doesn't need any extra software on Windows XP or higher, that at least supports standard input, output, pause, and file manipulation, little else.

    Read the article

  • Global Adopt a JSR Program Update

    - by heathervc
    The Global Adopt a JSR program, combining efforts of SouJava and London Java Community,  is an excellent place to get some Java User Group (JUG) resources for JSRs.  It also has the potential to act as an extra set of eyes, ears and volunteers for JSRs. The Global project to go to is at: http://adoptajsr.java.net.  The wiki page explaining the whole program and benefits to Spec Leads and EG's can be found there, including: The mailing list: [email protected] . Portugese speakers-mainly Brazlian JUG members-have their own mailing list and more language lists may be added as required. The IRC channel is at adoptajsr on irc.freenode.net Also check out this InfoQ article with Martijn Verburg about the London Java user group, the Adopt a JSR program, the JCP and Oracle’s handling of the Java community.

    Read the article

  • How to have a PHP web site that can play videos offline?

    - by greco
    Our client asked to implement a system with web technologies and the basic functionalities of: We have 3 users: Admin, User, Visitor. provide videos with an indexing system. Videos and other info about them are uploaded from an admin panel. Users can make playlists, add extra info to videos etc. Visitors watch playlists, videos, track their progress etc. This are some of the very basic functionalities of the system, just to get an idea. So we agreed it's a saas project and we started with php,symphony,jquery,requireJS etc. Now our client says that he wants the user and visitor part has to be accessible offline only. He says the user can download the videos and software, and continue offline. What are your suggestions on this? Provide the ability for the user to download a local server, or another way?

    Read the article

  • Sharepoint courses on Pluralsight

    - by TATWORTH
    I have just heard from Plural Sight that through their partnership with Critical Path training, they are adding 33 new SharePoint courses at no extra cost. The key parts of their announcement at http://blog.pluralsight.com/2012/09/13/critical-path-training-joins-the-pluralsight-library-over-30-sharepoint-courses-today/ is:"Over the next several hours we’ll begin publishing our first set of Critical Path Training online courses, and by the end of the day, you will see a total of 33 new SharePoint courses added to the Pluralsight library! These new courses primarily cover SharePoint 2007 and SharePoint 2010 for developers, administrators, end users, power users, and web designers.""By end of year, we expect to release another 22 courses from Critical Path Training that will exclusively cover the SharePoint 2013 release."Well done Pluralsight and Critical Path!

    Read the article

  • Kubuntu? What is that..?

    - by Hayden Win
    Okay so when i was running the Ubuntu installer i found something called "Desktop Interface". It was apparently selected as Ubuntu. I looked at the full set of options and found out that there's Kubuntu there! I want to know what Kubuntu is. If i can get it on Virtualbox then how? I want to try out Kubuntu but i don't want to over write my Ubuntu with Kubuntu. [ Because of Ask Ubuntu's "This question body does not meet our etc etc" i have been forced to include this extra text ]

    Read the article

  • Monitor aspect ratio; Does the difference matter?

    - by Craige
    So, I'm looking ordering myself a new development desktop soon and setting up a PROPER office environment by the end of this year. To boost productivity, I'm going to purchase three new monitors. I find that two just isn't enough when I'm debugging or doing something intensive. That said, I had something pointed out to me the other day that I never really noticed nor cared about before - is the difference between a 16:10 and a 16:9 monitor noticeable when programming? Do you really miss those few extra lines, or is it something that you don't notice at all. I notice HP only seems to sell 16:9 monitors (as far as I have found). Is this becoming something of a new standard with the recent growth and cleaver marketing of of "HD 16:9"? To summarize: Has anybody made the switch from 16:10 to 16:9 (or vise-versa) and actually noticed the difference while programming?

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >