Search Results

Search found 4205 results on 169 pages for 'intel rst'.

Page 53/169 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• TCP 3 way handshake

  - by Tom

  Hi, i'm just observing what NMAP is doing for the 3 ports it reports are open. I understand what a half-scan attack is, but what's happening doesnt make sense. NMAP is reporting ports 139 are 445 are open..... all fine. But when i look at the control bits, NMAP never sends RST once it has found out the port is open, It does this for port 135- but not 139 and 445. This is what happens: (I HAVE OMITTED THE victim's replies) Sends a 2 (SYN) Sends a 16 (ACK) Sends a 24 (ACK + PST) Sends a 16 (ACK) Sends a 17 (ACK + FIN) I dont get why NMAP doesnt 'RST' ports 139 and 445??

  Read the article

• How to make flyspell bypass some words by context?

  - by manu

  Hi, I use Emacs for writing most of my writings. I write using reStructuredText, and then transform them to LaTeX after some preprocessing since I write my citations á-la LaTeX. This is an excerpt of one of my texts (in Spanish): En \cite[pp.~XXVIII--XXIX]{Crnkovic2002} se brindan algunos riesgos que se pueden asumir con el desarrollo basado en componentes, los This text is processed by some custom scripts that deals with the \cite part so rst2latex can do its job. When I activate flyspell-mode it signals most of the citation keys as spelling errors. How can I tell flyspell not to spellcheck things within \cite commands. Furthermore, how can I combine rst-mode and flyspell, so that rst-mode would keep flyspell from spellchecking the following? reST comments reST code literal reST directive parameters and arguments reST raw directive contents Any ideas?

  Read the article

• How to make my display Grayscale?

  - by Oldarney

  I want to reduce the saturation of my laptop monitor to the point that it is almost grayscale. That's the goal. Intel and Asus don't have an answer. Asus Splendid and the intel graphics control panel can increase the saturation, but not lower it. I would prefer a software solution, although I DIY'ed a vga grayscale adapter for my desktop. I have an Asus UL30A with an Intel GMA 4500MHD. I know that the latest ATI cards, windotosh's and high end nvidia cards all support control panel desaturation. Why? black and white makes me 3 times more productive.

  Read the article

• reStructured Text - Escape a headline?

  - by Rory

  I have a reStructuredText document. rST uses =====, etc. as a heading format. However I need to include some lines that have this text in it, e.g.: some of my text ===== stuff ===== some more of my text And I don't want the ==== to be interpreted as a heading, i.e. I don't want stuff to be a heading. I would rather that those equal signs are just displayed as is. Is this possible in rST?

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• SQL SERVER – The Difference between Dual Core vs. Core 2 Duo

  - by pinaldave

  I have decided that I would not write on this subject until I have received a total of 25 questions on this subject. Here are a few questions from the list: Questions: What is the difference between Dual Core and Core 2 Duo? Which one is recommended for SQL Server: Core 2 Duo or Dual Core? Can I upgrade my Dual Core to Core 2 Duo? If Dual Core has 2 CPUs, how many CPUs does Core 2 Duo have? Is it true that Core 2 Duo and Dual Core meant the same thing? Well, let us see the answer. Optimistically, I would be directing everybody to this blog post if I receive a question of the same kind sometime in the future. To verify the information that I provide, visit Intel’s site. For additional information regarding the subject, visit Wikipedia. My Answer: Any computer that has two CPUs or two “cores“ is known as Dual Core. Core Duo is a brand name of Intel for Dual Core. Core 2 Duo is simply a higher version of Core Duo. (e.g. for Pentium brand, it`s like Pentium I, Pentium II, etc.) The computer I am using now has Core 2 Duo. Intel has launched a new brand, which they call i3, i5, and i7.  Here, the numbers are not related to the number of cores; rather, they show the range of the CPU. I3 is of low range and i7 is of high range. Feel free to add more details by adding valuable comments here. And if you still want to ask why I created this blog post, well, I mentioned that I was waiting for 25 questions threshold to hit, before I write about this subject which I didn`t really plan to write about. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• Is 1GB RAM with integrated graphics sufficient for Unity 3D on 12.04?

  - by Anwar Shah

  I have been using Ubuntu since Hardy Heron (8.04). I used Natty, Oneiric with Unity. But When I recently (more than 1 month now) upgraded My Ubuntu to Precise (12.04), the performance of my laptop is not satisfactory. It is too unresponsive compared to older releases. For example, the Unity in 12.04 is very unresponsive. Sometimes, it requires 2 seconds to show up the dash (which was not the case with Natty, though people always saying that Natty's version of Unity is buggiest). I am assuming that, May be my 1GB RAM now becomes too low to run Unity of Precise. But I also think, Since Unity is improved in Precise, It may not be the case. So, I am not sure. Do you have any ideas? Will upgrading RAM fix it? How much I need if upgrade is required? Laptop model: "Lenovo 3000 Y410" Graphic : "Intel GMA X3100" on Intel 965GM Chipset. RAM/Memory : "1 GB DDR2" (1 slot empty). Swap space : 1.1GB Resolution: 1280x800 widescreen Shared RAM for Graphics: 256 MB as below output suggests $ dmesg | grep AGP [ 0.825548] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000

  Read the article

• How to improve battery life on Samsung 13.3” Series 7 Ultra (NP730U3E-S01AU)?

  - by beam022

  Recently I've bought a Series 7 Ultra Samsung ultrabook and decided to change the OS from originally installed Windows 8 to Ubuntu 14.04LTS. However, it's difficult not to notice great decrease in battery life: on pre-installed Windows 8 battery would last for about 6 hours while on Ubuntu it's almost empty after 2 hours of same kind of work (wi-fi, web, vlc, spotify, intellij idea). I'm not here to say that Ubuntu's battery performance is worse than Windows, but to ask for suggestions how to improve the situation (2 hours of work is pretty poor battery life). Can you recommend some sources, applications or tips/tricks that would improve battery life on my ultrabook? I really like the Ubuntu experience, but this makes my machine much less reliable. I suspect that graphic video card might be one of the issues here. Let me give you tech specs of the ultrabook: Processor: Intel® Core™ i5 Processor 3337U (1.80GHz, 3MB L3 Cache) Chipset: Intel HM76 Graphic: AMD Radeon™ HD 8570M Graphics with 1GB gDDR3 Graphic Memory (PowerExpress) and Intel(R) HD Graphics 4000 Display: 13.3" SuperBright+ 350nit FHD LED Display (1920 x 1080), Anti-Reflective Memory: 10GB DDR3 System Memory at 1,600MHz Hard-drive: 128GB Solid-state Drive More informations here, on the official page. If it's helpful to provide additional info, I'm happy to do it, just let me know what you need. Thank you.

  Read the article

• Ubuntu 12.04.2 won't boot after bumblebee instalation

  - by Andrej

  First of all sorry for my English, it's not my first language. Here is what I have done: I had a working ubuntu 12.04 with all updates and working bumblebee, so I could do optirun command and battery life was better than without bumblebee. Than I decided to reinstall both my systems installed windows 7 and ubuntu. Reinstalled Windows 7 all working as expected, than on other partition installed ubuntu 12.04. All worked perfectly. Than I installed bumblebee according to the procedure written here https://wiki.ubuntu.com/Bumblebee same steps that I used before. But now after I install drivers and do all written in procedure and I reboot my notebook system won't boot, it is simply stuck at black screen after short showing of start screen. I reinstalled ubuntu many times already and tried everthing, but when I try install nvidia drivers it won't boot after shutting down notebook and only thing I can do is reinstalling system. I have Lenovo Thinkpad Edge E530 and processor: Intel® Core™ i5-3210M CPU and graphic cards are Intel HD 4000 and Nvidia geforce gt630m After clean install without bumblebee, terminal command lspci| grep VGA is showing: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) Can you suggest a sollution?? Or at least some links to similar topics??

  Read the article

• Ubuntu 12.04 taking too much time to boot

  - by adarshdinesh

  Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

  Read the article

• How to run installation CD for second monitor?

  - by dobsoft

  I am running ubuntu 14 off of a live USB. I have a second monitor that I would like to use while using ubuntu. It has an installation cd that you have to install before using, and when I click on the .exe file the Archive Manager tries to open it and says an error occurred while loading the archive. Thanks for the help. Edit: additional information It just doesn't show up when when I'm in the display settings area. I press the locate(name is probably something else) monitor button too. I know it needs the CD because when I was using it with Windows it didn't work until I went through the installation process on the CD. If ubuntu doesn't use .exe files is there a way to use the CD still? Monitor info from label: -acer LCD monitor -model number: S200HQL Version: S200HQL bd I connect it to my computer using a VGA cord which is connected to a j5create VGA to USB adapter. Not sure if this helps: VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) lsusb output: Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 005: ID 0bc2:2100 Seagate RSS LLC Bus 002 Device 007: ID 0711:5200 Magic Control Technology Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c18 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Internal Mic not working on Dell Adamo 13

  - by AFD

  So I'm using Elementary Luna Beta (based on Ubuntu 12.04 LTS) on a spare HDD after successfully using Jupiter release (based on 10.10) for many years. In Jupiter I had my internal mic work out of the box and with Skype installed from deb it was all setup without having to step foot inside the terminal. In Luna Beta the internal mic is not recognised by the OS and so also not recognised by Skype. I believe the hardware is this (from sudo lshw): *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:46 memory:f8600000-f8603fff As well as this I ran cat /proc/asound/card0/codec* | grep Codec which gave me: Codec: IDT 92HD73C1X5 Codec: Intel Cantiga HDMI How do I tweak Luna to get this hardware working properly? I'm able to switch out my Luna HDD with the Jupiter HDD to help troubleshoot what the differences are between the two and why the more recent OS can't find / use the mic correctly. Thanks in advance for any help you can give.

  Read the article

• Multiple monitors showing same screen but different resolutions

  - by Luis Alvarado

  Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

  Read the article

• Why are my videos playing speeded up with no audio, but work fine if I log in as a guest?

  - by Martins Kruze

  Since the start of this week I have been experiencing a glitch in the multimedia on my Samsung R518 laptop. I have 2 problems: Videos in every player are speeded up around 2 or 4 times (including youtube.com (both HTML5 and flash variants), any other video on the web and videos on my laptop played by Totem Media Player), exception is VLC player, but 2nd problem does concern even that. There is no sound - simple as that (with or without headphones plugged in). These all problems are now, and has not seen before, I upgraded to Ubuntu 10.10 after it was possible, and from start I didn't have anything from this - it just started in this week. I haven't even putted new software in. I have more or less solved the question (kind of) - I just logged in as a guest - and it all works, but when I make a new user - it does not. Please help me. Some stats below: sudo lshw -c sound *-multimedia description: Audio device product: RV710/730 vendor: ATI Technologies Inc physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:48 memory:cfeec000-cfeeffff *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:47 memory:fc200000-fc203fff sudo lshw -c video *-display description: VGA compatible controller product: M92 LP [Mobility Radeon HD 4300 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:46 memory:d0000000-dfffffff ioport:2000(size=256) memory:cfef0000-cfefffff memory:cfe00000-cfe1ffff

  Read the article

• Hybrid Graphics Functional won't work with my Asus UL30V anymore

  - by futuress

  The problem is that I am no longer able to boot in compatibility mode for just turning on my Nvidia graphics to install the driver. Because no login screen will appear if Ubuntu is loading. In Ubuntu 11.10 I was able to activate nvidia graphics only' option this way: 1) Change BIOS to 'compatibility mode' which will turn off the Intel card. 2) Install the Nvidia proprietary driver using Ubuntu's driver finder (Additional Drivers) and then reboot. I was not interested using only the Intel graphics, for the sake of battery life. Now I have both cards running and they drain my battery life dramatically. And the main problem of this configuration no OpenGL is available, so I can't play any games any more. At this point, I have a pre-solution. I uninstalled the nvidia drivers and installed bumblebee. Now the Intel card is recognized. I would prefer to run just the nvidia card as in Ubuntu 11.10 but for now this is better than nothing. Does anybody else have the same problem?

  Read the article

• No Wireless In Ubuntu 13.10

  - by viktorhubinette

  When I upgraded to Ubuntu 13.10, I can't connect to wireless. The only thing I can connect to is ethernet, so please help me, What should I do? Here is the output of the lspci -nnk | grep -i net -A2 00:19.0 ethernet controller [0200]:intel corporation 82579V Gigabit network connection [8086:1503] (rev 04) subsystem: acer incorporated [ALI Device] [1025:8000] Kernel driver in use : e100e output of lsusb: Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:0152 Realtek Semiconductor Corp. Mass Storage Device Bus 001 Device 040: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 003 Device 003: ID 045e:070f Microsoft Corp. Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Extension GLX missing...on a desktop PC

  - by Bart van Heukelom

  I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

  Read the article

• Dual boot on Hp Envy Ultrabook

  - by phodu_insaan

  I just bought a HP Envy ultrabook 1002TX. It comes with a Win7 Home basic and a 32GB SSD + 500GB HDD. I started to install ubuntu and in doing so went and deleted all the partitions on my HDD and recreated them the way I wanted. Then when I tried to install ubuntu it didn't recognize my HDD. To solve this i typed dmraid -E -r /dev/sdX where the 'X' was my SSD drive. After this ubuntu can install but windows for some reason does not install. Also the Intel Caching feature is lost and SSD is just sitting and doing nothing. I want to know how to solve this problem. Ideeally I would like to use the SSD for caching, either in windows or ubuntu. How do I get the SSD back to working as an Intel rapid cache? How do I get windows to install properly? It tell me that windows is unable to configure itself to my hardware, and my PC came with windows pre-installed so this is not possible. Sorry for the long question and thanks for your answers! PS: At one time when I booted I pressed Ctrl+i and went to the intel rapid cache menu. I think i screwed up something in here, because only after this the rapid cache stopped working, and each time I booted the PC thought the BIOS was my primary disk.

  Read the article

• Ubuntu 11.10 not starting in Graphical mode?

  - by iammilind

  I am in deep trouble. I am using Ubuntu 11.10 in dual boot mode with XP. Originally my touch pad was not working, (sometimes). To fix that, I installed something. After reboot my Ubuntu is not booting up!! I have several software pkgs already installed in past several weeks so reinstall of OS is my last resort. Can someone help me to get it rebooted in graphical mode? I had followed the procedure mentioned in this thread as well. With that link, somehow I am able to restart in text mode. But no luck after that. I am not being able to go back on graphical mode. The important outputs of lspci are following: 00.00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.0 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) I am attaching few snapshots, for more details on hardware.

  Read the article

• Low Graphics and laggy screen after update to 13.10 from 13.04

  - by Wh0RU

  After updating from 13.04 to 13.10 many of 3D unity stuff has stopped working, I am suing Samsung Series 3 (NP350V5X) Laptop which has Switchable Intel and AMD Radeon HD 7670M GFX. xserver-xorg-video-ati does works but NO 3D support and graphics are very low. [I am currently using this] fglrx & fglrx-updates shows blank screen after Login. Intel Graphic Install doesn't work either (dependency error) Output of $ sudo lshw -c video *-display description: VGA compatible controller product: Thames [Radeon HD 7500M/7600M Series] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:45 memory:e0000000-efffffff memory:c0120000-c013ffff ioport:3000(size=256) memory:c0100000-c011ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:bfc00000-bfffffff memory:d0000000-dfffffff ioport:4000(size=64) Similarly $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 256 bits) OpenGL version string: 2.1 Mesa 9.2.1 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Shows no 3D support. Can anyone please guide how to make things working again.

  Read the article

• Wireless switch on Dell XT2 - strange behaviour of rfkill

  - by DyP

  I have an Dell Latitude XT2 using an Intel WLAN card (lspci lists it as "Intel Corporation Ultimate N WiFi Link 5300") running Lubuntu 12.04 with recent updates. The laptop has a hardware WLAN switch. I have problems activating the WLAN when booting with the hardware switch set to "off". The situation is a bit confusing, unfortunately. rfkill lists two WLAN devices (though lspci only shows the Intel one). This is the situation when booting with the hardware switch set to "Off": 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes From some tests, I conclude WLAN is only activated when both, the dell-wifi and phy0, are unblocked by soft- and hardware. But I can only unblock dell-wifi after the hardware switch is set to "on". Procedure right from boot with hardware switch set to "Off": Soft-unblocking phy0 works as expected. Could be done by start-up script. sudo rfkill unblock 0: nothing happens. Soft block of dell-wifi not removed. Set the hardware switch to "on": phy0 gets its hard block removed. Still no WLAN. sudo rfkill unblock 0: both the soft and hard lock of dell-wifi are removed. WLAN is now active and works. sudo rfkill block 0: only adds the soft block as expected. WLAN goes off again. So, in order to activate WLAN, I have to use the hardware switch and afterwards (manually) run a script - that's a bit inconvenient. Does someone know a better solution? Maybe a daemon could help that listens to rfkill events to unblock dell-wifi after I have set the hardware switch to "on"? (sounds like another workaround) When booting with the hardware switch set to "On", nothing is blocked neither hard nor soft.

  Read the article

• Audio not working in 12.10

  - by frampy

  I did a clean install of 12.10, when I open Sound Settings in gnome the only device in the list is "Dummy Output", and sound is not working. Sound worked fine out of the box in 12.04 I ran alsamixer, it says my card is "HDA Intel", and chip is "Realtek ALC880". The alsamixer playback output was set to mute at first, unmuting did not fix. I checked out the info at http://www.unixmen.com/2012003-howto-resolve-nosound-problem-on-ubuntu/ as suggested on a similar question, I've done everything there except installing the ubuntu audio dev team driver. Should I try install this? Edit: I've been reading the sound troubleshooting guide at https://help.ubuntu.com/community/SoundTroubleshooting It looks like Ubuntu is finding my audio device correctly. mike@wucade:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Albatron Corp. Device 2668 Flags: bus master, fast devsel, latency 0, IRQ 40 Memory at d01c0000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Still stuck as to why this isn't working.

  Read the article

• Just installed Ubuntu 12.04. When booting, all I get is a black screen with cursor

  - by user66378

  Installation appears to go fine. After rebooting, I get my motherboard loading screens, but when it comes time for Ubuntu to boot, I just get a black screen with a blinking white underscore in the top-left - same as I got when waiting for the install CD to load, except it lasts forever. The only keypress it seems to recognize is ctrl+alt+del, which reboots. Letters don't register, function keys w/ or w/o modifiers do nothing. I've installed Ubuntu 12.04 twice and got the same error. The first time, I installed it as the only OS, and had it take up the whole disk. The second time, I installed Windows 7 first, then Ubuntu by specifying custom partitions. After this install, it would boot straight to Windows without showing grub. I used EasyBCD to add the Ubuntu installation to grub, and this got grub to show, and let me select it, but it led back to the same error described up top. I've had Linux Mint 11 and 12 installed on this PC, but was unable to get previous versions of Ubuntu to install (always had errors while installing, not after). Hardware: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 ASUS SABERTOOTH P67 (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard EVGA 01G-P3-1371-TR GeForce GTX 460 (Fermi) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Western Digital RE4 WD5003ABYX 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive

  Read the article

• Oracle Open World 2012?????

  - by Liu Maclean(???)

  Oracle Open World 2012?????: ???.. Oracle OpenWorld 2012 sessions????:Search Content Catalog for Oracle OpenWorld 2012 sessions ?????????session??? Open World 2012??: Larry ??Exadata X3 OOW 2012???Exadata X3,?? X3-2 ?Expansion Rack X3-2?X3-8 Exadata X3????:http://www.oracle.com/us/products/database/exadata/overview/index.html  ORACLE EXADATA Database MACHINE X3-8 sheetORACLE EXADATA Database MACHINE X3-2 sheet Exadata X3-2???????: X3-2?compute db node?????????8?Intel Xeon E5-2690??? ??????????12????16?,???33%????? ???96GB???128GB,????256GB ??????????50% X3-2 cell node??????????????Intel Xeon ??????flash card flash card??????4?,??flash card?????????40%? ???X3-2???22.4TB?flash ,??????flash????????????????????,???10????? CPU???6?,????????Intel Xeon model ????????X2-2??,???600GB???????3TB?????? ??Exadata X3-2?????????,??????????1/4?????,1/8????????????????? Exadata X3-8???????: X3-8???X2-8?????,???X3-8??????????X3-2??,??X3-8?????22.4TB?????? ???CEO??  Engineered to Work Together OOW????? Oracle Open World 2012 ????? Open World 2012 ??:http://www.oracle.com/openworld/index.htmlOpen World 2012 ????:http://www.oracle.com/openworld/register/packages/index.html ??: Sept. 30 – Oct. 4, 2012 9?30?? 10?4? ??:Moscone Center, San Francisco (747 Howard Street, San Francisco, California 94103). ?????Mark Hurd??OOW 2012: How big is oow OOW 2012?????????: Focus On Database Technologies Focus On Real Application Clusters Focus On Exadata Focus On Oracle Database Appliance Focus On Oracle Database Application Development Focus On Oracle Database Security Focus On Big Data Focus On Data Warehousing Focus On High Availability Focus On Oracle Enterprise Manager Cloud Control 12c (and Private Cloud) Focus On Oracle Spatial and Graph Focus On Oracle Database Utilities Focus On Oracle Database Upgrade Focus On Oracle Database Private Cloud Focus On .Net Focus On Oracle Database on Windows Focus On Engineered Systems Focus On Sunday Users Forum

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >