Search Results

Search found 1423 results on 57 pages for 'joe larson'.

Page 53/57 | < Previous Page | 49 50 51 52 53 54 55 56 57  | Next Page >

  • "Safe" personal router use on apartment-wide network

    - by noisetank
    I recently moved into an apartment with internet included in my rent. This was a boon at first, but now I'm feeling limited. To get devices connected (wired or wireless), I have to whitelist the MAC addresses on mycampusnet.com. This is annoying (considering I'm well over the 10 device limit including my roommate's stuff), but what's really driving me mad is that I don't seem to have any semblance of a "local" network. I've relied heavily on static IPs and port forwarding in the past (accessing NAS and remote desktop) and (as far as I can understand), that functionality is nonexistent without my router set up. Also, as my wired and wireless devices don't always seem to make it onto the same subnet, I'm unable to use any of my iDevices with my Apple TV (I can, however, mirror to no less than four strangers' Apple TVs at any moment, which is a whole other level of discomforting). I've talked to the head of the apartment complex and she told me that they personally don't have any issue with my using a router, but the provider (CampusConnect) does not currently allow it. Apparently, enough people have put in complaints/requests about the restriction (the apartments are for graduate students and University staff, many of which need to set up things like VPNs for work reasons) to open up some sort of ticket to get the functionality in place, but all the calls I've made to get status updates have been a waste of time. My question is: If I plugged my router into the apartment network, what would happen? I've been told already that personal routers would "interfere with the wireless" and that they would shut my port down if I used one, but is that a legitimate thing or just something made up that sounds real to keep the average Joe from pushing it further? I'm guessing there's some way of configuring my router to keep it from disrupting the rest of the network, but it's not something they want to tell me for obvious reasons. Am I right? And if so, what are the chances that they'd notice the difference in traffic or whatever and shut off my port?

    Read the article

  • How to send email from home ip when the email server isn't a designated outbound mail server allocated to BT Retail customers [on hold]

    - by Mr Shoubs
    (I am sys admin!) I can receive email, but when I try to send an email from my home office via our work email server I get the following reply: Your message did not reach some or all of the intended recipients. Subject: Test Sent: 19/08/2014 17:02 The following recipient(s) cannot be reached: 'Joe Blogs' on 19/08/2014 17:02 Server error: '554 5.7.1 Service unavailable; Client host [my-ip-here] blocked using zen.spamhaus.org; http://www.spamhaus.org/query/bl?ip=my-ip-here' I went to that URL and it says the following: Ref: PBL231588 81.152.0.0/13 is listed on the Policy Block List (PBL) Outbound Email Policy of BT Retail for this IP range: It is the policy of BT Retail that unauthenticated email sent from this IP address should be sent out only via the designated outbound mail server allocated to BT Retail customers. Please consult the following URL for details on how to configure your email client appropriately. http://btybb.custhelp.com/cgi-bin/btybb.cfg/php/enduser/cci/bty_adp.php?p_sid=fPnV4zhj&p_faqid=6876 Removal Procedure Removal of IP addresses within this range from the PBL is not allowed by the netblock owner's policy. Going to this URL just says: This site has been disabled for the time being. Does anyone know what I should do to allow me to send emails from my home ip - the site suggests I can configure my email client? (note that I have configured the client to use smtp authentication)

    Read the article

  • Is VGA port hot-pluggable?

    - by Martin Bøgelund
    In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

    Read the article

  • Use a single freemarker template to display tables of arbitrary pojos

    - by Kevin Pauli
    Attention advanced Freemarker gurus: I want to use a single freemarker template to be able to output tables of arbitrary pojos, with the columns to display defined separately than the data. The problem is that I can't figure out how to get a handle to a function on a pojo at runtime, and then have freemarker invoke that function (lambda style). From skimming the docs it seems that Freemarker supports functional programming, but I can't seem to forumulate the proper incantation. I whipped up a simplistic concrete example. Let's say I have two lists: a list of people with a firstName and lastName, and a list of cars with a make and model. would like to output these two tables: <table> <tr> <th>firstName</th> <th>lastName</th> </tr> <tr> <td>Joe</td> <td>Blow</d> </tr> <tr> <td>Mary</td> <td>Jane</d> </tr> </table> and <table> <tr> <th>make</th> <th>model</th> </tr> <tr> <td>Toyota</td> <td>Tundra</d> </tr> <tr> <td>Honda</td> <td>Odyssey</d> </tr> </table> But I want to use the same template, since this is part of a framework that has to deal with dozens of different pojo types. Given the following code: public class FreemarkerTest { public static class Table { private final List<Column> columns = new ArrayList<Column>(); public Table(Column[] columns) { this.columns.addAll(Arrays.asList(columns)); } public List<Column> getColumns() { return columns; } } public static class Column { private final String name; public Column(String name) { this.name = name; } public String getName() { return name; } } public static class Person { private final String firstName; private final String lastName; public Person(String firstName, String lastName) { this.firstName = firstName; this.lastName = lastName; } public String getFirstName() { return firstName; } public String getLastName() { return lastName; } } public static class Car { String make; String model; public Car(String make, String model) { this.make = make; this.model = model; } public String getMake() { return make; } public String getModel() { return model; } } public static void main(String[] args) throws Exception { final Table personTableDefinition = new Table(new Column[] { new Column("firstName"), new Column("lastName") }); final List<Person> people = Arrays.asList(new Person[] { new Person("Joe", "Blow"), new Person("Mary", "Jane") }); final Table carTable = new Table(new Column[] { new Column("make"), new Column("model") }); final List<Car> cars = Arrays.asList(new Car[] { new Car("Toyota", "Tundra"), new Car("Honda", "Odyssey") }); final Configuration cfg = new Configuration(); cfg.setClassForTemplateLoading(FreemarkerTest.class, ""); cfg.setObjectWrapper(new DefaultObjectWrapper()); final Template template = cfg.getTemplate("test.ftl"); process(template, personTableDefinition, people); process(template, carTable, cars); } private static void process(Template template, Table tableDefinition, List<? extends Object> data) throws Exception { final Map<String, Object> dataMap = new HashMap<String, Object>(); dataMap.put("tableDefinition", tableDefinition); dataMap.put("data", data); final Writer out = new OutputStreamWriter(System.out); template.process(dataMap, out); out.flush(); } } All the above is a given for this problem. So here is the template I have been hacking on. Note the comment where I am having trouble. <table> <tr> <#list tableDefinition.columns as col> <th>${col.name}</th> </#list> </tr> <#list data as pojo> <tr> <#list tableDefinition.columns as col> <td><#-- what goes here? --></td> </#list> </tr> </#list> </table> So col.name has the name of the property I want to access from the pojo. I have tried a few things, such as pojo.col.name and <#assign property = col.name/> ${pojo.property} but of course these don't work, I just included them to help convey my intent. I am looking for a way to get a handle to a function and have freemarker invoke it, or perhaps some kind of "evaluate" feature that can take an arbitrary expression as a string and evaluate it at runtime.

    Read the article

  • Introducing… SharePress!

    - by Bil Simser
    For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

    Read the article

  • Looking Back at MIX10

    - by WeigeltRo
    It’s the sad truth of my life that even though I’m fascinated by airplanes and flight in general since my childhood days, my body doesn’t like flying. Even the ridiculously short flights inside Germany are taking their toll on me each time. Now combine this with sitting in the cramped space of economy class for many hours on a transatlantic flight from Germany to Las Vegas and back, and factor in some heavy dose of jet lag (especially on my way eastwards), and you get an idea why after coming back home I had this question on my mind: Was it really worth it to attend MIX10? This of course is a question that will also be asked by my boss at Comma Soft (for other reasons, obviously), who decided to send me and my colleague Jens Schaller, to the MIX10 conference. (A note to my German readers: An dieser Stelle der Hinweis, dass Comma Soft noch Silverlight-Entwickler und/oder UI-Designer für den Standort Bonn sucht – aussagekräftige Bewerbungen bitte an [email protected]) Too keep things short: My answer is yes. Before I’ll go into detail, let me ask the heretical questions whether tech conferences in general still make sense. There was a time, where actually being at a tech conference gave you a head-start in regard to learning about new technologies. Nowadays this is no longer true, where every bit of information and every detail is immediately twittered, blogged and whatevered to death. In the case of MIX10 you even can download the video-taped sessions shortly after. So: Does visiting a conference still make sense? It depends on what you expect from a conference. It should be clear to everybody that you’ll neither get exclusive information, nor receive training in a small group. What a conference does offer that sitting in front of your computer does not can be summarized as follows: Focus Being away from work and home will help you to focus on the presented information. Of course there are always the poor guys who are haunted by their work (with mails and short text messages reporting the latest showstopper problem), but in general being out of your office makes a huge difference. Inspiration With the focus comes the emotional involvement. I find it much easier to absorb information if I feel that certain vibe when sitting in a session. This still means that I have put work into reviewing the information later, but it’s a better starting point. And all the impressions collected at a (good) conference combined lead to a higher motivation – be it by the buzz (“this is gonna be sooo cool!”) or by the fear to fall behind (“man, we’ll have work on this, or else…”). People At a conference it’s pretty easy to get into contact with other people during breakfast, lunch and other breaks. This is a good opportunity to get a feel for what other development teams are doing (on a very general level of course, nobody will tell you about their secret formula) and what they are thinking about specific technologies. So MIX10 did offer focus, inspiration and people, but that would have meant nothing without valuable content. When I (being a frontend developer with a strong interest in UI/UX) planned my visit to MIX10, I made the decision to focus on the "soft" topics of design, interaction and user experience. I figured that I would be bombarded with all the technical details about Silverlight 4 anyway in the weeks and months to come. Actually, I would have liked to catch a few technical sessions, but the agenda wasn’t exactly in favor of people interested in any kind of Silverlight and UI/UX/Design topics. That’s one of my few complaints about the conference – I would have liked one more day and/or more sessions per day. Overall, the quality of the workshops and sessions was pretty high. In fact, looking back at my collection of conferences I’ve visited in the past I’d say that MIX10 ranks somewhere near the top spot. Here’s an overview of the workshops/sessions I attended (I’ll leave out the keynotes): Day 0 (Workshops on Sunday) Design Fundamentals for Developers Robby Ingebretsen is the man! Great workshop in three parts with the perfect mix of examples, well-structured definition of terminology and the right dose of humor. Robby was part of the WPF team before founding his own company so he not only has a strong interest in design (and the skillz!) but also the technical background.   Design Tools and Techniques Originally announced to be held by Arturo Toledo, the Rosso brothers from ArcheType filled in for the first two parts, and Corrina Black had a pretty general part about the Windows Phone UI. The first two thirds were a mixed bag; the two guys definitely knew what they were talking about, and the demos were great, but the talk lacked the preparation and polish of a truly great presentation. Corrina was not allowed to go into too much detail before the keynote on Monday, but the session was still very interesting as it showed how much thought went into the Windows Phone UI (and there’s always a lot to learn when people talk about their thought process). Day 1 (Monday) Designing Rich Experiences for Data-Centric Applications I wonder whether there was ever a test-run for this session, but what Ken Azuma and Yoshihiro Saito delivered in the first 15 minutes of a 30-minutes-session made me walk out. A commercial for a product (just great: a video showing a SharePoint plug-in in an all-Japanese UI) combined with the most generic blah blah one could imagine. EPIC FAIL.   Great User Experiences: Seamlessly Blending Technology & Design I switched to this session from the one above but I guess I missed the interesting part – what I did catch was what looked like a “look at the cool stuff we did” without being helpful. Or maybe I was just in a bad mood after the other session.   The Art, Technology and Science of Reading This talk by Kevin Larson was very interesting, but was more a presentation of what Microsoft is doing in research (pretty impressive) and in the end lacked a bit the helpful advice one could have hoped for.   10 Ways to Attack a Design Problem and Come Out Winning Robby Ingebretsen again, and again a great mix of theory and practice. The clean and simple, yet effective, UI of the reader app resulted in a simultaneous “wow” of Jens and me. If you’d watch only one session video, this should be it. Microsoft has to bring Robby back next year! Day 2 (Tuesday) Touch in Public: Multi-touch Interaction Design for Kiosks & Architectural Experiences Very interesting session by Jason Brush, a great inspiration with many details to look out for in the examples. Exactly what I was hoping for – and then some!   Designing Bing: Heart and Science How hard can it be to design the UI for a search engine? An input field and a list of results, that should be it, right? Well, not so fast! The talk by Paul Ray showed the many iterations to finally get it right (up to the choice of a specific blue for the links). And yes, I want an eye-tracking device to play around with!   The Elephant in the Room When Nishant Kothary presented a long list of what his session was not about, I told to myself (not having the description text present) “Am I in the wrong talk? Should I leave?”. Boy, was I wrong. A great talk about human factors in the process of designing stuff.   An Hour with Bill Buxton Having seen Bill Buxton’s presentation in the keynote, I just had to see this man again – even though I didn’t know what to expect. Being more or less unplanned and intended to be more of a conversation, the session didn’t provide a wealth of immediately useful information. Nevertheless Bill Buxton was impressive with his huge knowledge of seemingly everything. But this could/should have been a session some when in the evening and not in parallel to at least two other interesting talks. Day 3 (Wednesday) Design the Ordinary, Like the Fixie This session by DL Byron and Kevin Tamura started really well and brought across the message to keep things simple. But towards the end the talk lost some of its steam. And, as a member of the audience pointed out, they kind of ignored their own advice when they used a fancy presentation software other then PowerPoint that sometimes got in the way of showing things.   Developing Natural User Interfaces Speaking of alternative presentation software, Joshua Blake definitely had the most remarkable alternative to PowerPoint, a self-written program called NaturalShow that was controlled using multi-touch on a touch screen. Not a PowerPoint-killer, but impressive nevertheless. The (excellent) talk itself was kind of eye-opening in regard to what “multi-touch support” on various platforms (WPF, Silverlight, Windows Phone) actually means.   Treat your Content Right The talk by Tiffani Jones Brown wasn’t even on my planned schedule, but somehow I ended up in that session – and it was great. And even for people who don’t necessarily have to write content for websites, some points made by Tiffani are valid in many places, notably wherever you put texts with more than a single word into your UI. Creating Effective Info Viz in Microsoft Silverlight The last session of MIX10 I attended was kind of disappointing. At first things were very promising, with Matthias Shapiro giving a brief but well-structured introduction to info graphics and interactive visualizations. Then the live-coding began and while the result was interesting, too much time was spend on wrestling to get the code working. Ending earlier than planned, the talk was a bit light on actual content, but at least it included a nice list of resources. Conclusion It could be felt all across MIX10, UIs will take a huge leap forward; in fact, there are enough examples that have already. People who both have the technical know-how and at least a basic understanding of design (“literacy” as Bill Buxton called it) are in high demand. The concept of the MIX conference and initiatives like design.toolbox shows that Microsoft understands very well that frontend developers have to acquire new knowledge besides knowing how to hack code and putting buttons on a form. There are extremely exciting times before us, with lots of opportunity for those who are eager to develop their skills, that is for sure.

    Read the article

  • git pull gives error: 401 Authorization Required while accessing https://git.foo.com/bar.git

    - by spuder
    My macbook pro is able to clone/push/pull from the company git server. My cent 6.3 vm gets a 401 error git clone https://git.acme.com/git/torque-setup "error: The requested URL returned error: 401 Authorization Required while accessing https://git.acme.com/git/torque-setup/info/refs As a work around, I've tried creating a folder, with an empty repository, then setting the remote to the company server. I get the same error when trying a git pull The remotes are identical between the machines MacBook Pro (working) git --version git version 1.7.10.2 (Apple Git-33) git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) Cent 6.3 (not working) yum install -y git git --version git version 1.7.1 git remote -v origin https://git.acme.com/git/torque-setup (fetch) origin https://git.acme.com/git/torque-setup (push) The git server only allows https. Not git or ssh connections. Why is the macbook pro able to do a git pull, while the cent os machine can't? Solution Update 2013-5-15 As jku mentioned, the culprit is the old version of git installed on the cent box. Unfortunately, 1.7.1 is what you get when you run yum install git The work around is to manually install a newer version of git, or simply add the username to the repo git clone https://[email protected]/git/torque-setup

    Read the article

  • Handling multiple column data with Java

    - by Ender
    I am writing an application that reads in a large number of basic user details in the following format; once read in it then allows the user to search for a user's details using their email: NAME ROLE EMAIL --------------------------------------------------- Joe Bloggs Manager [email protected] John Smith Consultant [email protected] Alan Wright Tester [email protected] ... The problem I am suffering is that I need to store a large number of details of all people that have worked at the company. The file containing these details will be written on a yearly basis simply for reporting purposes, but the program will need to be able to access these details quickly. The way I aim to access these files is to have a program that asks the user for the name of the unique email of the member of staff and for the program to then return the name and the role from that line of the file. I've played around with text files, but am struggling with how I would handle multiple columns of data when it comes to searching this large file. What is the best format to store such data in? A text file? XML? The size doesn't bother me, but I'd like to be able to search it as quickly as possible. The file will need to contain a lot of entries, probably over the 10K mark over time.

    Read the article

  • Delete duplicate records from a SQL table without a primary key

    - by Shyju
    I have the below table with the below records in it create table employee ( EmpId number, EmpName varchar2(10), EmpSSN varchar2(11) ); insert into employee values(1, 'Jack', '555-55-5555'); insert into employee values (2, 'Joe', '555-56-5555'); insert into employee values (3, 'Fred', '555-57-5555'); insert into employee values (4, 'Mike', '555-58-5555'); insert into employee values (5, 'Cathy', '555-59-5555'); insert into employee values (6, 'Lisa', '555-70-5555'); insert into employee values (1, 'Jack', '555-55-5555'); insert into employee values (4, 'Mike', '555-58-5555'); insert into employee values (5, 'Cathy', '555-59-5555'); insert into employee values (6 ,'Lisa', '555-70-5555'); insert into employee values (5, 'Cathy', '555-59-5555'); insert into employee values (6, 'Lisa', '555-70-5555'); I dont have any primary key in this table .But i have the above records in my table already. I want to remove the duplicate records which has the same value in EmpId and EmpSSN fields. Ex : Emp id 5 Can any one help me to frame a query to delete those duplicate records Thanks in advance

    Read the article

  • Groovy XmlSlurper

    - by Langali
    I am trying to parse a html file using Groovy XmlSlurper. <div id="users"> <h1>Name: Joe Doe</h1> <div id="user"> <div id="user_summary">Game: 1</div> <object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/DApLO_HDhD0&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/DApLO_HDhD0&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object> </div> <div id="user"> <div id="user_summary">Game: 2</div> ... </div> <div id="user"> .... </div> </div> <div id="featured_users"> <div id="user"> ... </div> <div id="user"> .... </div> </div> I need to grab each user (and not featured user) with his name, summary and object tag (which the video embed code). Anybody wanna give it a shot? Here's a start: def parser =new XmlSlurper(new org.ccil.cowan.tagsoup.Parser()) def response = parser.parseText(htmlString) def users = response.depthFirst().collect { it }.findAll { it.@id == "users" } users.each { ...... } I cant seem to be able to get much further:

    Read the article

  • How to convert this code-based WPF tooltip to Silverlight?

    - by Edward Tanguay
    The following ToolTip code works in WPF. I'm trying to get it to work in Silverlight. But it gives me these errors: TextBlock does not contain a definition for ToolTip. Cursors does not contain a definition for Help. ToolTipService does not contain a definition for SetInitialShowDelay. How can I get this to work in Silverlight? using System.Windows; using System.Windows.Controls; using System.Windows.Input; using System.Windows.Media; namespace TestHover29282 { public partial class Window1 : Window { public Window1() { InitializeComponent(); AddCustomer("Jim Smith"); AddCustomer("Joe Jones"); AddCustomer("Angie Jones"); AddCustomer("Josh Smith"); } void AddCustomer(string name) { TextBlock tb = new TextBlock(); tb.Text = name; ToolTip tt = new ToolTip(); tt.Content = "This is some info on " + name + "."; tb.ToolTip = tt; tt.Cursor = Cursors.Help; ToolTipService.SetInitialShowDelay(tb, 0); MainStackPanel.Children.Add(tb); } } }

    Read the article

  • Why isn't my WPF Datagrid showing data?

    - by Edward Tanguay
    This walkthrough says you can create a WPF datagrid in one line but doesn't give a full example. So I created an example using a generic list and connected it to the WPF datagrid, but it doesn't show any data. What do I need to change on the code below to get it to show data in the datagrid? ANSWER: This code works now: XAML: <Window x:Class="TestDatagrid345.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:toolkit="http://schemas.microsoft.com/wpf/2008/toolkit" xmlns:local="clr-namespace:TestDatagrid345" Title="Window1" Height="300" Width="300" Loaded="Window_Loaded"> <StackPanel> <toolkit:DataGrid ItemsSource="{Binding}"/> </StackPanel> </Window> Code Behind: using System.Collections.Generic; using System.Windows; namespace TestDatagrid345 { public partial class Window1 : Window { private List<Customer> _customers = new List<Customer>(); public List<Customer> Customers { get { return _customers; }} public Window1() { InitializeComponent(); } private void Window_Loaded(object sender, RoutedEventArgs e) { DataContext = Customers; Customers.Add(new Customer { FirstName = "Tom", LastName = "Jones" }); Customers.Add(new Customer { FirstName = "Joe", LastName = "Thompson" }); Customers.Add(new Customer { FirstName = "Jill", LastName = "Smith" }); } } }

    Read the article

  • LINQ-to-XML selection based on node values, newbie question

    - by mmcglynn
    Given the following XML, I would like to return all eventtitles where the eventtype id = 23. My current query only looks at the first eventtype, so returns the wrong result. <event> <eventtitle>Garrison Keillor</eventtitle> <eventtypes> <eventtype id="24"/> <eventtype id="23"/> </eventtypes> </event> <event> <eventtitle>Joe Krown Trio featuring Walter Wolfman Washington</eventtitle> <eventtypes> <eventtype id="23"/> </eventtypes> </event> LINQ query: Dim query = _ From c In calXML...<event> _ Where c...<eventtypes>.<eventtype>.@id = "23" _ Select c.<eventtitle>.Value, c.<eventlocation>.Value For Each item In query Response.Write("<h3>" & item.eventtitle & "</h3>") Response.Write(item.eventlocation & "<br />") Next

    Read the article

  • Filtering documents against a dictionary key in MongoDB

    - by Thomas
    I have a collection of articles in MongoDB that has the following structure: { 'category': 'Legislature', 'updated': datetime.datetime(2010, 3, 19, 15, 32, 22, 107000), 'byline': None, 'tags': { 'party': ['Peter Hoekstra', 'Virg Bernero', 'Alma Smith', 'Mike Bouchard', 'Tom George', 'Rick Snyder'], 'geography': ['Michigan', 'United States', 'North America'] }, 'headline': '2 Mich. gubernatorial candidates speak to students', 'text': [ 'BEVERLY HILLS, Mich. (AP) \u2014 Two Democratic and Republican gubernatorial candidates found common ground while speaking to private school students in suburban Detroit', "Democratic House Speaker state Rep. Andy Dillon and Republican U.S. Rep. Pete Hoekstra said Friday a more business-friendly government can help reduce Michigan's nation-leading unemployment rate.", "The candidates were invited to Detroit Country Day Upper School in Beverly Hills to offer ideas for Michigan's future.", 'Besides Dillon, the Democratic field includes Lansing Mayor Virg Bernero and state Rep. Alma Wheeler Smith. Other Republicans running are Oakland County Sheriff Mike Bouchard, Attorney General Mike Cox, state Sen. Tom George and Ann Arbor business leader Rick Snyder.', 'Former Republican U.S. Rep. Joe Schwarz is considering running as an independent.' ], 'dateline': 'BEVERLY HILLS, Mich.', 'published': datetime.datetime(2010, 3, 19, 8, 0, 31), 'keywords': "Governor's Race", '_id': ObjectId('4ba39721e0e16cb25fadbb40'), 'article_id': 'urn:publicid:ap.org:0611e36fb084458aa620c0187999db7e', 'slug': "BC-MI--Governor's Race,2nd Ld-Writethr" } If I wanted to write a query that looked for all articles that had at least 1 geography tag, how would I do that? I have tried writing db.articles.find( {'tags': 'geography'} ), but that doesn't appear to work. I've also thought about changing the search parameter to 'tags.geography', but am having a devil of a time figuring out what the search predicate would be.

    Read the article

  • C# COM objects with VB6/asp error

    - by Ken
    I'm trying to expose a C# class library via COM so that I can use it in a classic asp web site. I've used sn - k, regasm and gacutil. About all I can do now though is echo back strings. Methods which take Class variables as input are not working for me. ie my test method EchoPerson(Person p) which returns a string of the first and last name doesn't work. I get a runtime error 5 - Invalid procedure call or argument. Please let me know what I am missing. Also I have no intellisence in VB. What do I need to do to get the intellisence working. Below is my C# test code namespace MrdcToFastCom { public class Person : MrdcToFastCom.IPerson { public string FirstName { get; set; } public string LastName { get; set; } } public class ComTester : MrdcToFastCom.IComTester { public string EchoString(string s) { return ("Echo: " + s); } public string Hello() { return "Hello"; } public string EchoPerson(ref Person p) { return string.Format("{0} {1}", p.FirstName, p.LastName); } } } and VB6 call Private Sub btnClickMe_Click() Dim ct Set ct = New MrdcToFastCom.ComTester Dim p Set p = New MrdcToFastCom.Person p.FirstName = "Joe" p.LastName = "Test" Dim s s = ct.EchoPerson(p) 'Error on this line tbx1.Text = s End Sub

    Read the article

  • Linq Query Performance , comparing Compiled query vs Non-Compiled.

    - by AG.
    Hello Guys, I was wondering if i extract the common where clause query into a common expression would it make my query much faster, if i have say something like 10 linq queries on a collection with exact same 1st part of the where clause. I have done a small example to explain a bit more . public class Person { public string First { get; set; } public string Last { get; set; } public int Age { get; set; } public String Born { get; set; } public string Living { get; set; } } public sealed class PersonDetails : List<Person> { } PersonDetails d = new PersonDetails(); d.Add(new Person() {Age = 29, Born = "Timbuk Tu", First = "Joe", Last = "Bloggs", Living = "London"}); d.Add(new Person() { Age = 29, Born = "Timbuk Tu", First = "Foo", Last = "Bar", Living = "NewYork" }); Expression<Func<Person, bool>> exp = (a) => a.Age == 29; Func<Person, bool> commonQuery = exp.Compile(); var lx = from y in d where commonQuery.Invoke(y) && y.Living == "London" select y; var bx = from y in d where y.Age == 29 && y.Living == "NewYork" select y; Console.WriteLine("All Details {0}, {1}, {2}, {3}, {4}", lx.Single().Age, lx.Single().First , lx.Single().Last, lx.Single().Living, lx.Single().Born ); Console.WriteLine("All Details {0}, {1}, {2}, {3}, {4}", bx.Single().Age, bx.Single().First, bx.Single().Last, bx.Single().Living, bx.Single().Born); So can some of the guru's here give me some advice if it would be a good practice to write query like var lx = "Linq Expression " or var bx = "Linq Expression" ? Any inputs would be highly appreciated. Thanks, AG

    Read the article

  • Unexpected Blank lines in python output

    - by Martlark
    I have a bit of code that runs through a dictionary and outputs the values from it in a CSV format. Strangely I'm getting a couple of blank lines where all the output of all of the dictionary entries is blank. I've read the code and can't understand has anything except lines with commas can be output. The blank line should have values in it, so extra \n is not the cause. Can anyone advise why I'd be getting blank lines? Other times I run the missing line appears. Missing line: 6415, 6469, -4.60, clerical, 2, ,,,joe,030193027org,joelj,030155640dup Using python 2.6.5 Bit of code: tfile = file(path, 'w') tfile.write('Rec_ID_A, Rec_ID_B, Weight, Assigned, Run, By, On, Comment\n') rec_num_a = 0 while (rec_num_a <= max_rec_num_a): try: value = self.dict['DA'+str(rec_num_a)] except: value = [0,0,0,'rejected'] if (value[3]!='rejected'): weightValue = "%0.2f" % value[2] line = value[0][1:] + ', ' + value[1][1:] + ', ' + weightValue \ + ', ' + str(value[3]) + ', ' + str(value[4]) if (len(value)>5): line = line + ', ' + value[5] + ',' + value[6] + ',' + value[7] (a_pkey, b_pkey) = self.derive_pkeys(value) line = line + a_pkey + b_pkey tfile.write( line + '\n') rec_num_a +=1 Sample output 6388, 2187, 76.50, clerical, 1, ,,,cameron,030187639org,cameron,030187639org 6398, 2103, 70.79, clerical, 1, ,,,caleb,030189225org,caldb,030189225dup 6402, 2205, 1.64, clerical, 2, ,,,jenna,030190334org,cameron,020305169dup 6409, 7892, 79.09, clerical, 1, ,,,liam,030191863org,liam,030191863org 6416, 11519, 79.09, clerical, 1, ,,,thomas,030193156org,thomas,030193156org 6417, 8854, 6.10, clerical, 2, ,,,ruby,030193713org,mia,020160397org 6421, 2864, -0.84, clerical, 2, ,,,kristin,030194394org,connou,020023478dup 6423, 413, 75.63, clerical, 1, ,,,adrian,030194795org,adriah,030194795dup

    Read the article

  • Testing a scoped find in a Rails controller with RSpec

    - by Joseph DelCioppio
    I've got a controller called SolutionsController whose index action is different depending on the value of params[:user_id]. If its nil, then it simply displays all of the solutions on my site, but if its not nil, then it displays all of the solutions for the given user id. Here it is: def index if(params[:user_id]) @solutions = @user.solutions.find(:all) else @solutions = Solution.find(:all) end end and @user is determined like this: private def load_user if(params[:user_id ]) @user = User.find(params[:user_id]) end end I've got an Rspec test to test the index action if the user is nil: describe "GET index" do context "when user_id is nil" do it "should find all of the solutions" do Solution.should_receive(:find).with(:all).and_return(@solutions) get :index end end end however, can someone tell me how I write a similar test for the other half of my controller, when the user id isn't nil? Something like: describe "GET index" do context "when user_id isn't nil" do before(:each) do @user = Factory.create(:user) @solutions = 7.times{Factory.build(:solution, :user => @user)} @user.stub!(:solutions).and_return(@solutions) end it "should find all of the solutions owned by a user" do @user.should_receive(:solutions).and_return(@solutions) get :index, :user_id => @user.id end end end But that doesn't work. Can someone help me out? Joe

    Read the article

  • Testing a scoped find in a Rails controller with RSpec

    - by Joseph DelCioppio
    I've got a controller called SolutionsController whose index action is different depending on the value of params[:user_id]. If its nil, then it simply displays all of the solutions on my site, but if its not nil, then it displays all of the solutions for the given user id. Here it is: def index if(params[:user_id]) @solutions = @user.solutions.find(:all) else @solutions = Solution.find(:all) end end and @user is determined like this: private def load_user if(params[:user_id ]) @user = User.find(params[:user_id]) end end I've got an Rspec test to test the index action if the user is nil: describe "GET index" do context "when user_id is nil" do it "should find all of the solutions" do Solution.should_receive(:find).with(:all).and_return(@solutions) get :index end end end however, can someone tell me how I write a similar test for the other half of my controller, when the user id isn't nil? Something like: describe "GET index" do context "when user_id isn't nil" do before(:each) do @user = Factory.create(:user) @solutions = 7.times{Factory.build(:solution, :user => @user)} @user.stub!(:solutions).and_return(@solutions) end it "should find all of the solutions owned by a user" do @user.should_receive(:solutions).and_return(@solutions) get :index, :user_id => @user.id end end end But that doesn't work. Can someone help me out? Joe

    Read the article

  • flow 2 columns of text automatically with CSS

    - by Joseph Mastey
    I have the code similar to the following: <p>This is paragraph 1. Lorem ipsum ... </p> <p>This is paragraph 2. Lorem ipsum ... </p> <p>This is paragraph 3. Lorem ipsum ... </p> <p>This is paragraph 4. Lorem ipsum ... </p> <p>This is paragraph 5. Lorem ipsum ... </p> <p>This is paragraph 6. Lorem ipsum ... </p> I'd like to, without markup if possible, cause this text to flow into two columns (1-3 on the left, 4-6 on the right). The reason for my hesitation to add a column using a <div> is that this text is entered by the client via a WYSIWYG editor, so any elements I inject are likely to be killed later on inexplicably. Thanks, Joe

    Read the article

  • Active Directory - Query Group for all machines

    - by Ben Cawley
    Hi, I'm trying to obtain a list of all Machines that are members of a known group. I have the group GUID and am constructing a query using the "memberof=" format and filtering by ObjectClass. This works fine but doesn't return machines if the PrimaryGroup attribute of a machine is set to be the known group. In this case, that machine won't be returned. I've found the explanation of why this is in the following link (See Joe Kaplan's response) http://www.eggheadcafe.com/software/aspnet/29773581/active-directory-query-c.aspx Unfortunately the outlined answer is how to obtain the list of groups from a given user. I'd like to do the reverse and from a given group obtain the list of machines. It seems that the PrimaryGroup information is stored on the Machine/User side so I'm not sure if what I want to do is even possible. I had thought I would be able to query the TokenGroup attribute of the known group and then construct a query to return all machines that have the TokenGroup attribute set but it seems that not all groups have this attribute. Does anyone have any ideas or suggestions? If any clarification is needed let me know! Cheers, Ben

    Read the article

  • Create a HTML table from nested maps (and vectors)

    - by Kenny164
    I'm trying to create a table (a work schedule) I have coded previously using python, I think it would be a nice introduction to the Clojure language for me. I have very little experience in Clojure (or lisp in that matter) and I've done my rounds in google and a good bit of trial and error but can't seem to get my head around this style of coding. Here is my sample data (will be coming from an sqlite database in the future): (def smpl2 (ref {"Salaried" [{"John Doe" ["12:00-20:00" nil nil nil "11:00-19:00"]} {"Mary Jane" [nil "12:00-20:00" nil nil nil "11:00-19:00"]}] "Shift Manager" [{"Peter Simpson" ["12:00-20:00" nil nil nil "11:00-19:00"]} {"Joe Jones" [nil "12:00-20:00" nil nil nil "11:00-19:00"]}] "Other" [{"Super Man" ["07:00-16:00" "07:00-16:00" "07:00-16:00" "07:00-16:00" "07:00-16:00"]}]})) I was trying to step through this originally using for then moving onto doseq and finally domap (which seems more successful) and dumping the contents into a html table (my original python program outputed this from a sqlite database into an excel spreadsheet using COM). Here is my attempt (the create-table fn): (defn html-doc [title & body] (html (doctype "xhtml/transitional") [:html [:head [:title title]] [:body body]])) (defn create-table [] [:h1 "Schedule"] [:hr] [:table (:style "border: 0; width: 90%") [:th "Name"][:th "Mon"][:th "Tue"][:th "Wed"] [:th "Thur"][:th "Fri"][:th "Sat"][:th "Sun"] [:tr (domap [ct @smpl2] [:tr [:td (key ct)] (domap [cl (val ct)] (domap [c cl] [:tr [:td (key c)]]))]) ]]) (defroutes tstr (GET "/" ((html-doc "Sample" create-table))) (ANY "*" 404)) That outputs the table with the sections (salaried, manager, etc) and the names in the sections, I just feel like I'm abusing the domap by nesting it too many times as I'll probably need to add more domaps just to get the shift times in their proper columns and the code is getting a 'dirty' feel to it. I apologize in advance if I'm not including enough information, I don't normally ask for help on coding, also this is my 1st SO question :). If you know any better approaches to do this or even tips or tricks I should know as a newbie, they are definitely welcome. Thanks.

    Read the article

  • YUI button onclick get value

    - by Simon
    I have a a set of yui buttons generated using the standard yui html. <span class="yui-button yui-checkbox-button" id="analystbutton1"> <span class="first-child"> <button type="button" class="facetbutton" tabindex="0" id="analystbutton1-button"> Joe Bloggs </button> </span> </span> I create the buttons like so, and I then have some javascript to create the button and the listener. var analystCButton1 = new YAHOO.widget.Button("analystbutton1", { type:"checkbox", value:"BLOGGS", checked:false }); analystCButton1.on("click", onFacetClick); Finally I have the onFacetClick function var onFacetClick = function (e) { // e is the event var target = YAHOO.util.Event.getTarget(e); var button = new YAHOO.widget.Button(target); alert(button.get('type')); alert(button.get('id')); alert(button.get('value')); }; When I click on any of my buttons the first two alerts display the type and id (although not what I would expect). I cannot get the value, the alert doesn't fire, but I see no error in FireBug or the error console. alert(button.get('type')); returns push - I would expect checkbox alert(button.get('id')); returns analystbutton1-button

    Read the article

  • How to use a Spring config file in a Maven dependency

    - by javamonkey79
    In dependency A I have the following: <beans> <bean id="simplePersonBase" class="com.paml.test.SimplePerson" abstract="true"> <property name="firstName" value="Joe" /> <property name="lastName" value="Smith" /> </bean> </beans> And then in project B, I add A as a dependency and have the following config: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd"> <bean id="simplePersonAddress01" parent="simplePersonBase"> <property name="firstName" value="BillyBob" /> <property name="address" value="1060 W. Addison St" /> <property name="city" value="Chicago" /> <property name="state" value="IL" /> <property name="zip" value="60613" /> </bean> </beans> When I use ClassPathXmlApplicationContext like so: BeanFactory beanFactory = new ClassPathXmlApplicationContext( new String[] { "./*.xml" } ); SimplePerson person = (SimplePerson)beanFactory.getBean( "simplePersonAddress01" ); System.out.println( person.getFirstName() ); Spring complains as it can not resolve the parent xml. Caused by: org.springframework.beans.factory.NoSuchBeanDefinitionException: No bean named 'simplePersonBase' is defined I am sure there is a way to do this, however, I have not found it. Does anyone know how?

    Read the article

  • Polymorphic Numerics on .Net and In C#

    - by Bent Rasmussen
    It's a real shame that in .Net there is no polymorphism for numbers, i.e. no INumeric interface that unifies the different kinds of numerical types such as bool, byte, uint, int, etc. In the extreme one would like a complete package of abstract algebra types. Joe Duffy has an article about the issue: http://www.bluebytesoftware.com/blog/CommentView,guid,14b37ade-3110-4596-9d6e-bacdcd75baa8.aspx How would you express this in C#, in order to retrofit it, without having influence over .Net or C#? I have one idea that involves first defining one or more abstract types (interfaces such as INumeric - or more abstract than that) and then defining structs that implement these and wrap types such as int while providing operations that return the new type (e.g. Integer32 : INumeric; where addition would be defined as public Integer32 Add(Integer32 other) { return Return(Value + other.Value); } I am somewhat afraid of the execution speed of this code but at least it is abstract. No operator overloading goodness... Any other ideas? .Net doesn't look like a viable long-term platform if it cannot have this kind of abstraction I think - and be efficient about it. Abstraction is reuse.

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57  | Next Page >