Search Results

Search found 2390 results on 96 pages for 'morten green hermansen'.

Page 53/96 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • Trying to use HUAWEI E173 on Ubuntu 12.04

    - by Scott Warren
    I have a HUAWEI E173 usb stick to access the internet. It works normally on windows but I need to use it on my Ubuntu system. I plug it in, and after 25-20 seconds the status light turns green and blinks twice every 3 seconds. I see no changes in my system whatsoever, nothing gets installed, I don't get prompted for my PIN. I tried to create a connection using edit connections. I entered the following parameters: Turkey, Turkcell, My Plan is not listed, Internet. Nothing happens. I tried the lsusb command and got the following: tosh2000@tosh:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp. Bus 001 Device 004: ID 12d1:14ba Huawei Technologies Co., Ltd. I tried the usb-devices command and can see the device: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=14ba Rev=00.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Based on other advice I found, I tried the following command: sudo modprobe usbserial vendor=0x12d1 product=0x14ba Again, nothing happened. My question is why does the "enable mobile broadband" not populate automatically in the dropdown networking menu and how can I can I start using the device? Thank you.

    Read the article

  • HTML5 Form Validation

    - by Stephen.Walther
    The latest versions of Google Chrome (16+), Mozilla Firefox (8+), and Internet Explorer (10+) all support HTML5 client-side validation. It is time to take HTML5 validation seriously. The purpose of the blog post is to describe how you can take advantage of HTML5 client-side validation regardless of the type of application that you are building. You learn how to use the HTML5 validation attributes, how to perform custom validation using the JavaScript validation constraint API, and how to simulate HTML5 validation on older browsers by taking advantage of a jQuery plugin. Finally, we discuss the security issues related to using client-side validation. Using Client-Side Validation Attributes The HTML5 specification discusses several attributes which you can use with INPUT elements to perform client-side validation including the required, pattern, min, max, step, and maxlength attributes. For example, you use the required attribute to require a user to enter a value for an INPUT element. The following form demonstrates how you can make the firstName and lastName form fields required: <!DOCTYPE html> <html > <head> <title>Required Demo</title> </head> <body> <form> <label> First Name: <input required title="First Name is Required!" /> </label> <label> Last Name: <input required title="Last Name is Required!" /> </label> <button>Register</button> </form> </body> </html> If you attempt to submit this form without entering a value for firstName or lastName then you get the validation error message: Notice that the value of the title attribute is used to display the validation error message “First Name is Required!”. The title attribute does not work this way with the current version of Firefox. If you want to display a custom validation error message with Firefox then you need to include an x-moz-errormessage attribute like this: <input required title="First Name is Required!" x-moz-errormessage="First Name is Required!" /> The pattern attribute enables you to validate the value of an INPUT element against a regular expression. For example, the following form includes a social security number field which includes a pattern attribute: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Pattern</title> </head> <body> <form> <label> Social Security Number: <input required pattern="^\d{3}-\d{2}-\d{4}$" title="###-##-####" /> </label> <button>Register</button> </form> </body> </html> The regular expression in the form above requires the social security number to match the pattern ###-##-####: Notice that the input field includes both a pattern and a required validation attribute. If you don’t enter a value then the regular expression is never triggered. You need to include the required attribute to force a user to enter a value and cause the value to be validated against the regular expression. Custom Validation You can take advantage of the HTML5 constraint validation API to perform custom validation. You can perform any custom validation that you need. The only requirement is that you write a JavaScript function. For example, when booking a hotel room, you might want to validate that the Arrival Date is in the future instead of the past: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Constraint Validation API</title> </head> <body> <form> <label> Arrival Date: <input id="arrivalDate" type="date" required /> </label> <button>Submit Reservation</button> </form> <script type="text/javascript"> var arrivalDate = document.getElementById("arrivalDate"); arrivalDate.addEventListener("input", function() { var value = new Date(arrivalDate.value); if (value < new Date()) { arrivalDate.setCustomValidity("Arrival date must be after now!"); } else { arrivalDate.setCustomValidity(""); } }); </script> </body> </html> The form above contains an input field named arrivalDate. Entering a value into the arrivalDate field triggers the input event. The JavaScript code adds an event listener for the input event and checks whether the date entered is greater than the current date. If validation fails then the validation error message “Arrival date must be after now!” is assigned to the arrivalDate input field by calling the setCustomValidity() method of the validation constraint API. Otherwise, the validation error message is cleared by calling setCustomValidity() with an empty string. HTML5 Validation and Older Browsers But what about older browsers? For example, what about Apple Safari and versions of Microsoft Internet Explorer older than Internet Explorer 10? What the world really needs is a jQuery plugin which provides backwards compatibility for the HTML5 validation attributes. If a browser supports the HTML5 validation attributes then the plugin would do nothing. Otherwise, the plugin would add support for the attributes. Unfortunately, as far as I know, this plugin does not exist. I have not been able to find any plugin which supports both the required and pattern attributes for older browsers, but does not get in the way of these attributes in the case of newer browsers. There are several jQuery plugins which provide partial support for the HTML5 validation attributes including: · jQuery Validation — http://docs.jquery.com/Plugins/Validation · html5Form — http://www.matiasmancini.com.ar/jquery-plugin-ajax-form-validation-html5.html · h5Validate — http://ericleads.com/h5validate/ The jQuery Validation plugin – the most popular JavaScript validation library – supports the HTML5 required attribute, but it does not support the HTML5 pattern attribute. Likewise, the html5Form plugin does not support the pattern attribute. The h5Validate plugin provides the best support for the HTML5 validation attributes. The following page illustrates how this plugin supports both the required and pattern attributes: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>h5Validate</title> <style type="text/css"> .validationError { border: solid 2px red; } .validationValid { border: solid 2px green; } </style> </head> <body> <form id="customerForm"> <label> First Name: <input id="firstName" required /> </label> <label> Social Security Number: <input id="ssn" required pattern="^\d{3}-\d{2}-\d{4}$" title="Expected pattern is ###-##-####" /> </label> <input type="submit" /> </form> <script type="text/javascript" src="Scripts/jquery-1.4.4.min.js"></script> <script type="text/javascript" src="Scripts/jquery.h5validate.js"></script> <script type="text/javascript"> // Enable h5Validate plugin $("#customerForm").h5Validate({ errorClass: "validationError", validClass: "validationValid" }); // Prevent form submission when errors $("#customerForm").submit(function (evt) { if ($("#customerForm").h5Validate("allValid") === false) { evt.preventDefault(); } }); </script> </body> </html> When an input field fails validation, the validationError CSS class is applied to the field and the field appears with a red border. When an input field passes validation, the validationValid CSS class is applied to the field and the field appears with a green border. From the perspective of HTML5 validation, the h5Validate plugin is the best of the plugins. It adds support for the required and pattern attributes to browsers which do not natively support these attributes such as IE9. However, this plugin does not include everything in my wish list for a perfect HTML5 validation plugin. Here’s my wish list for the perfect back compat HTML5 validation plugin: 1. The plugin would disable itself when used with a browser which natively supports HTML5 validation attributes. The plugin should not be too greedy – it should not handle validation when a browser could do the work itself. 2. The plugin should simulate the same user interface for displaying validation error messages as the user interface displayed by browsers which natively support HTML5 validation. Chrome, Firefox, and Internet Explorer all display validation errors in a popup. The perfect plugin would also display a popup. 3. Finally, the plugin would add support for the setCustomValidity() method and the other methods of the HTML5 validation constraint API. That way, you could implement custom validation in a standards compatible way and you would know that it worked across all browsers both old and new. Security It would be irresponsible of me to end this blog post without mentioning the issue of security. It is important to remember that any client-side validation — including HTML5 validation — can be bypassed. You should use client-side validation with the intention to create a better user experience. Client validation is great for providing a user with immediate feedback when the user is in the process of completing a form. However, client-side validation cannot prevent an evil hacker from submitting unexpected form data to your web server. You should always enforce your validation rules on the server. The only way to ensure that a required field has a value is to verify that the required field has a value on the server. The HTML5 required attribute does not guarantee anything. Summary The goal of this blog post was to describe the support for validation contained in the HTML5 standard. You learned how to use both the required and the pattern attributes in an HTML5 form. We also discussed how you can implement custom validation by taking advantage of the setCustomValidity() method. Finally, I discussed the available jQuery plugins for adding support for the HTM5 validation attributes to older browsers. Unfortunately, I am unaware of any jQuery plugin which provides a perfect solution to the problem of backwards compatibility.

    Read the article

  • Take a Tour of Google’s Data Centers

    - by Jason Fitzpatrick
    Miles of cables, robots archiving backup tapes, and quarter-million-gallon cooling tanks: take of tour of Google’s data centers to see just how the search giant fuels the engine that delivers your search results so quickly. The collection of photos includes data centers around the world and offers a rare behind the scenes look at their operations. In some cases, we’re even treated to a literal behind the scenes view as seen in the photo above, from the Mayes County, Oklahoma data center: A rare look behind the server aisle. Here hundreds of fans funnel hot air from the server racks into a cooling unit to be recirculated. The green lights are the server status LEDs reflecting from the front of our servers. Hit up the link below for the full tour that includes photos and information about the data centers, the people that run them, and even a Street View style tour inside. Where the Internet Lives [Google Data Centers] Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference

    Read the article

  • Monitoring SQL Server Agent job run times

    - by okeofs
    Introduction A few months back, I was asked how long a particular nightly process took to run. It was a super question and the one thing that struck me was that there were a plethora of factors affecting the processing time. This said, I developed a query to ascertain process run times, the average nightly run times and applied some KPI’s to the end query. The end goal being to enable me to quickly detect anomalies and processes that are running beyond their normal times. As many of you are aware, most of the necessary data for this type of query, lies within the MSDB database. The core portion of the query is shown below.select sj.name,sh.run_date, sh.run_duration, case when len(sh.run_duration) = 6 then convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 5 then '0' + convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 4 then '00' + convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 3 then '000' + convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 2 then '0000' + convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 1 then '00000' + convert(varchar(8),sh.run_duration) end as tt from dbo.sysjobs sj with (nolock) inner join dbo.sysjobHistory sh with (nolock) on sj.job_id = sh.job_id where sj.name = 'My Agent Job' and [sh.Message] like '%The job%') Run_date and run_duration are obvious fields. The field ‘Name’ is the name of the job that we wish to follow. The only major challenge was that the format of the run duration which was not as ‘user friendly’ as I would have liked. As an example, the run duration 1 hour 10 minutes and 3 seconds would be displayed as 11003; whereas I wanted it to display this in a more user friendly manner as 01:10:03. In order to achieve this effect, we need to add leading zeros to the run_duration based upon the case logic shown above. At this point what we need to do add colons between the hours and minutes and one between the minutes and seconds. To achieve this I nested the query shown above (in purple) within a ‘super’ query. Thus the run time ([Run Time]) is constructed concatenating a series of substrings (See below in Blue). select run_date,substring(convert(varchar(20),tt),1,2) + ':' +substring(convert(varchar(20),tt),3,2) + ':' +substring(convert(varchar(20),tt),5,2) as [run_time] from (select sj.name,sh.run_date, sh.run_duration,case when len(sh.run_duration) = 6 then convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 5 then '0' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 4 then '00' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 3 then '000' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 2 then '0000' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 1 then '00000' + convert(varchar(8),sh.run_duration)end as ttfrom dbo.sysjobs sj with (nolock)inner join dbo.sysjobHistory sh with (nolock) on sj.job_id = sh.job_id where sj.name = 'My Agent Job'and [sh.Message] like '%The job%') a Now that I had each nightly run time in hours, minutes and seconds (01:10:03), I decided that it would very productive to calculate a rolling run time average. To do this, I decided to do the calculations in base units of seconds. This said, I encapsulated the query shown above into a further ‘super’ query (see the code in RED below). This encapsulation is shown below. The astute reader will note that I used implied casting from integer to string, which is not the best method to use however it works. This said and if I were constructing the query again I would definitely do an explicit convert. To Recap: I now have a key field of ‘1’, each and every applicable run date and the total number of SECONDS that the process ran for each run date, all of this data within the #rawdata1 temporary table. Select 1 as keyy,run_date,(substring(b.run_time,1,2)*3600) + (substring(b.run_time,4,2)*60) + (substring(b.run_time,7,2)) as run_time_in_Seconds,run_time into #rawdata1 from ( select run_date,substring(convert(varchar(20),tt),1,2) + ':' + substring(convert(varchar(20),tt),3,2) + ':' +substring(convert(varchar(20),tt),5,2) as [run_time] from (select sj.name,sh.run_date, sh.run_duration, case when len(sh.run_duration) = 6 then convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 5 then '0' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 4 then '00' + convert(varchar(8),sh.run_duration)when len(sh.run_duration)    = 3 then '000' + convert(varchar(8),sh.run_duration)when len(sh.run_duration)    = 2 then '0000' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 1 then '00000' + convert(varchar(8),sh.run_duration)end as ttfrom dbo.sysjobs sj with (nolock)inner join dbo.sysjobHistory sh with (nolock)on sj.job_id = sh.job_id where sj.name = 'My Agent Job'and [sh.Message] like '%The job%') a )b   Calculating the average run time We now select each run time in seconds from #rawdata1 and place the values into another temporary table called #rawdata2. Once again we create a ‘key’, a hardwired ‘1’. select 1 as Keyy, run_time_in_Seconds into #rawdata2 from #rawdata1The purpose of doing so is to make the average time AVG() available to the query immediately without having to do adverse grouping. Applying KPI Logic At this point, we shall apply some logic to determine whether processing times are within the norms. We do this by applying colour names. Obviously, this example is a super one for SSRS and traffic light icons.select rd1.run_date, rd1.run_time, rd1.run_time_in_Seconds ,Avg(rd2.run_time_in_Seconds) as Average_run_time_in_seconds,casewhenConvert(decimal(10,1),rd1.run_time_in_Seconds)/Avg(rd2.run_time_in_Seconds)<= 1.2 then 'Green' when Convert(decimal(10,1),rd1.run_time_in_Seconds)/Avg(rd2.run_time_in_Seconds)< 1.4 then 'Yellow' else 'Red'end as [color], Calculating the Average Run Time in Hours Minutes and Seconds and the end of the query. casewhen len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))else convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))end + ':' + case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)else convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)end + ':' + case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)else convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)end as [Average Run Time HH:MM:SS] from #rawdata2 rd2 innerjoin #rawdata1 rd1on rd1.keyy = rd2.keyygroup by run_date,rd1.run_time ,rd1.run_time_in_Seconds order by run_date descThe complete code example use msdbgo/*drop table #rawdata1drop table #rawdata2go*/select 1 as keyy,run_date,(substring(b.run_time,1,2)*3600) + (substring(b.run_time,4,2)*60) + (substring(b.run_time,7,2)) as run_time_in_Seconds,run_time into #rawdata1 from (select run_date,substring(convert(varchar(20),tt),1,2) + ':' +substring(convert(varchar(20),tt),3,2) + ':' +substring(convert(varchar(20),tt),5,2) as [run_time] from (select name,run_date, run_duration, casewhenlen(run_duration) = 6 then convert(varchar(8),run_duration)whenlen(run_duration) = 5 then '0' + convert(varchar(8),run_duration)whenlen(run_duration) = 4 then '00' + convert(varchar(8),run_duration)whenlen(run_duration) = 3 then '000' + convert(varchar(8),run_duration)whenlen(run_duration) = 2 then '0000' + convert(varchar(8),run_duration)whenlen(run_duration) = 1 then '00000' + convert(varchar(8),run_duration)end as ttfrom dbo.sysjobs sj with (nolock)innerjoin dbo.sysjobHistory sh with (nolock) on sj.job_id = sh.job_id where name = 'My Agent Job'and [Message] like '%The job%') a ) bselect 1 as Keyy, run_time_in_Seconds into #rawdata2 from #rawdata1select rd1.run_date, rd1.run_time, rd1.run_time_in_Seconds ,Avg(rd2.run_time_in_Seconds) as Average_run_time_in_seconds,casewhenConvert(decimal(10,1),rd1.run_time_in_Seconds)/Avg(rd2.run_time_in_Seconds)<= 1.2 then 'Green' when Convert(decimal(10,1),rd1.run_time_in_Seconds)/Avg(rd2.run_time_in_Seconds)< 1.4 then 'Yellow' else 'Red'end as [color],Case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))else convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))end + ':' + case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)else convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)end + ':' + case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)else convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)end as [Average Run Time HH:MM:SS] from #rawdata2 rd2 innerjoin #rawdata1 rd1on rd1.keyy = rd2.keyygroup by run_date,rd1.run_time ,rd1.run_time_in_Seconds order by run_date desc  

    Read the article

  • Screen space to world space

    - by user13414
    I am writing a 2D game where my game world has x axis running left to right, y axis running top to bottom, and z axis out of the screen: Whilst my game world is top-down, the game is rendered on a slight tilt: I'm working on projecting from world space to screen space, and vice-versa. I have the former working as follows: var viewport = new Viewport(0, 0, this.ScreenWidth, this.ScreenHeight); var screenPoint = viewport.Project(worldPoint.NegateY(), this.ProjectionMatrix, this.ViewMatrix, this.WorldMatrix); The NegateY() extension method does exactly what it sounds like, since XNA's y axis runs bottom to top instead of top to bottom. The screenshot above shows this all working. Basically, I have a bunch of points in 3D space that I then render in screen space. I can modify camera properties in real time and see it animate to the new position. Obviously my actual game will use sprites rather than points and the camera position will be fixed, but I'm just trying to get all the math in place before getting to that. Now, I am trying to convert back the other way. That is, given an x and y point in screen space above, determine the corresponding point in world space. So if I point the cursor at, say, the bottom-left of the green trapezoid, I want to get a world space reading of (0, 480). The z coordinate is irrelevant. Or, rather, the z coordinate will always be zero when mapping back to world space. Essentially, I want to implement this method signature: public Vector2 ScreenPointToWorld(Vector2 point) I've tried several things to get this working but am just having no luck. My latest thinking is that I need to call Viewport.Unproject twice with differing near/far z values, calculate the resultant Ray, normalize it, then calculate the intersection of the Ray with a Plane that basically represents ground-level of my world. However, I got stuck on the last step and wasn't sure whether I was over-complicating things. Can anyone point me in the right direction on how to achieve this?

    Read the article

  • Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video]

    - by Asian Angel
    Think that you have seen awesome touchscreen setups before? Then think again because the University of Groningen has put together the ultimate version with a super-sized 10 meter curved screen setup housed at their reality center. To learn more about the assorted hardware and software used in the creation of this touchscreen wonder see the detailed information section on the YouTube page (link provided below). Note: The video has approximately 1 minute of “blank” airplay at the end. Reality touchscreen University of Groningen [via Geeks are Sexy] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper] N64oid Brings N64 Emulation to Android Devices Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform]

    Read the article

  • How to Attach Sticky-Note Reminders to Windows and Applications

    - by Erez Zukerman
    Some applications come with a boatload of keyboard shortcuts; these can make you very fast, but can be difficult to remember, especially if you customized some of them. What if you could have your own little cheat sheet that would pop up next to the application every time your ran it? Read on to see how you can make one. We’re going to be using an excellent (and free) application called Stickies. If you don’t have it yet, go to the Stickies homepage, download it, and install it. Latest Features How-To Geek ETC How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? Get the MakeUseOf eBook Guide to Hacker Proofing Your PC Sync Your Windows Computer with Your Ubuntu One Account [Desktop Client] Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper]

    Read the article

  • Ubuntu 12.04 Not Recognising Arduino Uno

    - by John Fish
    I recently purchased an arduino uno from sparkfun, and attempted it with a fresh ubuntu 12.04 build. I installed the ide, and it seemed to work fine; I could write the sketches. However, when I plugged the arduino in, it appeared not to recognise it. I should also note that the arduino does draw power from the USB port, as the green "On" light is illuminated. The serial port arduino uno should be "assigned to" is /dev/ttyACM0. However, this did not exist, as upon running ls dev/tty*, I got the following results: /dev/tty /dev/tty23 /dev/tty39 /dev/tty54 /dev/ttyS10 /dev/ttyS26 /dev/tty0 /dev/tty24 /dev/tty4 /dev/tty55 /dev/ttyS11 /dev/ttyS27 /dev/tty1 /dev/tty25 /dev/tty40 /dev/tty56 /dev/ttyS12 /dev/ttyS28 /dev/tty10 /dev/tty26 /dev/tty41 /dev/tty57 /dev/ttyS13 /dev/ttyS29 /dev/tty11 /dev/tty27 /dev/tty42 /dev/tty58 /dev/ttyS14 /dev/ttyS3 /dev/tty12 /dev/tty28 /dev/tty43 /dev/tty59 /dev/ttyS15 /dev/ttyS30 /dev/tty13 /dev/tty29 /dev/tty44 /dev/tty6 /dev/ttyS16 /dev/ttyS31 /dev/tty14 /dev/tty3 /dev/tty45 /dev/tty60 /dev/ttyS17 /dev/ttyS4 /dev/tty15 /dev/tty30 /dev/tty46 /dev/tty61 /dev/ttyS18 /dev/ttyS5 /dev/tty16 /dev/tty31 /dev/tty47 /dev/tty62 /dev/ttyS19 /dev/ttyS6 /dev/tty17 /dev/tty32 /dev/tty48 /dev/tty63 /dev/ttyS2 /dev/ttyS7 /dev/tty18 /dev/tty33 /dev/tty49 /dev/tty7 /dev/ttyS20 /dev/ttyS8 /dev/tty19 /dev/tty34 /dev/tty5 /dev/tty8 /dev/ttyS21 /dev/ttyS9 /dev/tty2 /dev/tty35 /dev/tty50 /dev/tty9 /dev/ttyS22 /dev/tty20 /dev/tty36 /dev/tty51 /dev/ttyprintk /dev/ttyS23 /dev/tty21 /dev/tty37 /dev/tty52 /dev/ttyS0 /dev/ttyS24 /dev/tty22 /dev/tty38 /dev/tty53 /dev/ttyS1 /dev/ttyS25 Any help would be greatly appreciated.

    Read the article

  • Take Control of Workflow with Workflow Analyzer!

    - by user793553
    Take Control of Workflow with Workflow Analyzer! Immediate Analysis and Output of your EBS Workflow Environment The EBS Workflow Analyzer is a script that reviews the current Workflow Footprint, analyzes the configurations, environment, providing feedback, and recommendations on Best Practices and areas of concern. Go to Doc ID 1369938.1  for more details and script download with a short overview video on it. Proactive Benefits: Immediate Analysis and Output of Workflow Environment Identifies Aged Records Identifies Workflow Errors & Volumes Identifies looping Workflow items and stuck activities Identifies Workflow System Setup and configurations Identifies and Recommends Workflow Best Practices Easy To Add Tool for regular Workflow Maintenance Execute Analysis anytime to compare trending from past outputs The Workflow Analyzer presents key details in an easy to review graphical manner.   See the examples below. Workflow Runtime Data Table Gauge The Workflow Runtime Data Table Gauge will show critical (red), bad (yellow) and good (green) depending on the number of workflow items (WF_ITEMS).   Workflow Error Notifications Pie Chart A pie chart shows the workflow error notification types.   Workflow Runtime Table Footprint Bar Chart A pie chart shows the workflow error notification types and a bar chart shows the workflow runtime table footprint.   The analyzer also gives detailed listings of setups and configurations. As an example the workflow services are listed along with their status for review:   The analyzer draws attention to key details with yellow and red boxes highlighting areas of review:   You can extend on any query by reviewing the SQL Script and then running it on your own or making modifications for your own needs:     Find more details in these notes: Doc ID 1369938.1 Workflow Analyzer script for E-Business Suite Worklfow Monitoring and Maintenance Doc ID 1425053.1 How to run EBS Workflow Analyzer Tool as a Concurrent Request Or visit the My Oracle Support EBS - Core Workflow Community  

    Read the article

  • [MINI HOW-TO] Update Your Zune Player Software

    - by Mysticgeek
    Keeping your computer and software up to date is very important in keeping everything running smooth and secure. It’s also important to keep your geeky gadgets updated as well. Here we take a look at updating a Zune HD. Note: In this example we’re updating a Zune HD out of the box which hasn’t been updated yet. The first thing you’ll need to do if you haven’t already is download and install the latest Zune software (link below). Now plug your Zune into your computer with the included USB connection cable and give it a moment to be recognized. Next launch the Zune Desktop software and you should get the following screen. Just accept the EULA… Then the update kicks off. Make sure not to disconnect the Zune while the update takes place. The update will take a few minutes, and after it’s complete you should be good to go and can start using your Zune. To update your player in the future, go to General Settings then Player Update. Just like your computer’s hardware and software, you want to keep your other geeky gadgets updated as well. This will help the device run more smoothly, and sometimes add additional functionality. Download Zune 4.0 Similar Articles Productive Geek Tips Switch Ubuntu Server to use Internet Repositories Instead of cdromGreat Sounding Music and Skin Possibilities with XionExaile 0.3.0 is a Music Player for UbuntuMake VLC Player Look like Windows Media Player 11Unofficial Windows XP Themes Created by Microsoft TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox)

    Read the article

  • Download Angry Birds For Windows 7 & Windows XP

    - by Gopinath
    The famous Angry Birds game from Rovio is now available for your personal computers. You can download the game from Intel’s App Store for windows. It costs $5 and supported on Windows 7 and Windows XP computers. Here is a video of Angry Birds running on Windows 7 Laptop. The survival of the Angry Birds is at stake. Dish out revenge on the green pigs who stole the Birds’ eggs. Use the unique destructive powers of the Angry Birds to lay waste to the pigs’ fortifications. Angry Birds features hours and hours of challenging physics-based demolition gameplay, with lots of replay value. Each level requires a mixture of logic, skill, and brute force to crush the enemy. Download Angry Birds For PCs From Intel AppUp This article titled,Download Angry Birds For Windows 7 & Windows XP, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Ubuntu one, music streaming

    - by iknowshall
    I'm running Ubuntu 11.10, and just signed up for Ubuntu One and Ubuntu One Music. Generally file sync is working fine, but music has been a complete failure so far. Here's what I'm looking at: After 24 hours, not a single mp3 or ogg file from my laptop has sync'd to the Cloud Music folder. I have 4 gigs of data used, which is definitely not enough to include music files. That's about the right amount for my docs and photos. With music, it should be more like 13 gigs. No music shows up on the Ubuntu One Music app on my phone, nor on the web view of my Ubuntu One Cloud folder I followed all the online instructions I could find. Basically, on my laptop, right click on the Music folder and select "Ubuntu One Synchronize this folder" The Music folder now has a green check mark on it indicating its sync'd The Ubuntu One app on my laptop says "File Sync is up to date" I did provide credit card information, and on the Ubuntu One website "Music Streaming" is listed as one of my services. So what am I doing wrong? Just read this post as I'm experiencing the same problem, the answer for this post says that due to the large number of files trying to be uploaded, that it could take up to a week. However I am, as above also being told that "File sync is up to date" Can somebody confirm that this is a bug and that I just need to wait for File sync to actually be up to date? Cheers

    Read the article

  • The Strange History of the Honeywell Kitchen Computer

    - by Jason Fitzpatrick
    In 1969 the Honeywell corporation released a $10,000 kitchen computer that weighed 100 pounds, was as big as a table, and required advanced programming skills to use. Shockingly, they failed to sell a single one. Read on to be dumbfounded by how ahead of (and out of touch with) its time the Honeywell Kitchen Computer was. Wired delves into the history of the device, including how difficult it was to use: Now try to imagine all that in late 1960s kitchen. A full H316 system wouldn’t have fit in most kitchens, says design historian Paul Atkinson of Britain’s Sheffield Halam University. Plus, it would have looked entirely out of place. The thought that an average person, like a housewife, could have used it to streamline chores like cooking or bookkeeping was ridiculous, even if she aced the two-week programming course included in the $10,600 price tag. If the lady of the house wanted to build her family’s dinner around broccoli, she’d have to code in the green veggie as 0001101000. The kitchen computer would then suggest foods to pair with broccoli from its database by “speaking” its recommendations as a series of flashing lights. Think of a primitive version of KITT, without the sexy voice. Hit up the link below for the full article. How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

    Read the article

  • Oracle Congratulates Winners of the 2012 Oracle Excellence Award: Eco-Enterprise Innovation

    - by Evelyn Neumayr
    Oracle recently held its fifth annual Eco-Enterprise Innovation awards ceremony during Oracle OpenWorld in San Francisco. Oracle Chairman of the Board, Jeff Henley, awarded select customers for their use of Oracle products to help with their sustainability initiatives. During this session, several award recipients discussed how they embedded various sustainability strategies throughout their organizations to help reduce their costs as well as their environmental footprint. It was an interesting session based around green best business practices and how Oracle products enabled many of these customers’ sustainability efforts. The winning customers for 2012 are: Dena Bank, Earth Rangers Centre, Grupo Pão de Açúcar, Health Authority – Abu Dhabi, Korean Air, North County Transit District, Orlando Utilities Commission, Ricoh – Europe, Schneider Electric, Severn Trent Water, and Terracap. Several of these winning customers also selected a partner to co-accept the award with them. These winning partners played a major role in helping these customers achieve their sustainability-related efforts.. Oracle also awarded Ian Winham, Executive Vice President and Chief Financial Officer from Ricoh Europe, with Oracle's Chief Sustainability Officer of the Year award. Ricoh Europe is a multinational imaging and electronics company with a strong commitment to sustainability. Ian was honored for his leadership in reducing Ricoh's environmental impacts by leveraging Oracle's applications and underlying technology. See here for more details.

    Read the article

  • Clean Code Developer & Certification in IT - MSCC 21.09.2013

    It was a very busy weekend this time, and quite some hectic to organise the second meetup on a Saturday for the Mauritius Software Craftsmanship Community (MSCC) but it was absolutely fun. Following, I'm writing a brief summary about the topics we spoke about and the new impulses I got. "What a meetup... I was positively impressed. At the beginning I thought that noone would actually show up but then by the time the room got filled. Lots of conversation, great dialogues and fantastic networking between fresh students, experienced students, experienced employees, and self-employed attendees. That's what community is all about!" Above quote was my first reaction shortly after the gathering. And despite being busy during the weekend and yesterday, I took my time to reflect a little bit on things happened and statements made before writing it here on my blog. Additionally, I was also very curious about possible reactions and blogs from other attendees. Reactions from other craftsmen Let me quickly give you some links and quotes from others first... "Like Jochen posted on facebook, that was indeed a 5+ hours marathon (maybe 4 hours for me but still) … Wohoo! We’re indeed a bunch of crazy geeks who did not realise how time flew as we dived into the myriad discussions that sprouted. Yet in the end everyone was happy (:" -- Ish on MSCC meetup - The marathon (: "And the 4hours spent @ Talking drums bore its fruit..I was doing something I never did before....reading the borrowed book while walking....and though I was not that familiar with things mentionned in the book...I was skimming,scanning & flipping...reading titles...short paragraphs...and I skipped pages till I reached home." -- Yannick on Mauritius Software Craftsmanship 1st Meet-up "Hi Developers, Just wanted to share with you the meetups i attended last Saturday - [...] - The second meetup is the one hosted by Jochen Kirstätter, the MSCC, where the attendees were Craftsman, no woman, this time - all sharing the same passion of being a developer - even though it is on different platforms(Windows - Windows Phone - Linux - Adobe(yes a designer) - .Net) - but we manage to sit at the same table - sharing developer views and experience in the corporate world - also talking about good practice when coding( where Jochen initiated a discussion on Clean Coding ) i could not stay till the end - but from what i have heard - the longer you stay the more fun you have till 1600. Developers in the Facebook grouping i invite you to stay tuned about the various developer communities popping up - where you can come to share and learn good practices, develop the entrepreneurial spirit, and learn and share your passion about technologies" -- Arnaud on Facebook More feedback has been posted on the event directly. So, should I really write more? Wouldn't that spoil the impressions? Starting the day with a surprise Indeed, I was very pleased to stumble over the existence of Mobile Monday Mauritius on LinkedIn, an association about any kind of mobile app development, mobile gadgets and latest smartphones on the market. Despite the Monday in their name they had scheduled their recent meeting on Saturday between 10:00 and 12:00hrs. Wow, what a coincidence! Let's grap the bull by its horns and pay them an introductory visit. As they chose the Ebene Accelerator at the Orange Tower in Ebene it was a no-brainer to leave home a bit earlier and stop by. It was quite an experience and fun to talk to the geeks over there. Really looking forward to organise something together.... Arriving at the venue As the children got a bit uneasy at the MoMo gathering and I didn't want to disturb them too much, we arrived early at Bagatelle. Well, no problems as we went for a decent breakfast at Food Lover's Market. Shortly afterwards we went to our venue location, Talking Drums, and prepared the room for the meeting. We only had to take off a repro-painting of the wall in order to have a decent area for the projector. All went very smooth and my two little ones were of great help. Just in time, our first craftsman Avinash arrived on the spot. And then the waiting started... Luckily, not too long. Bit by bit more and more IT people came to join our meeting. Meanwhile, I used the time to give a brief introduction about the MSCC in general, what we are (hm, maybe I am) trying to achieve and that the recent phase is completely focused on creating more awareness that a community like the MSCC is active here in Mauritius. As soon as we reached some 'critical mass' of about ten people I asked everyone for a short introduction and bio, just in case... Conversation between participants started to kick in and we were actually more networking than having a focus on our topics of the day. Quick updates on latest news and development around the MSCC Finally, Clean Code Developer No matter how the position is actually called, whether it is Software Engineer, Software Developer, Programmer, Architect, or Craftsman, anyone working in IT is facing almost the same obstacles. As for the process of writing software applications there are re-occurring patterns and principles combined with some common exercise and best practices on how to resolve them. Initiated by the must-read book 'Clean Code' by Robert C. Martin (aka Uncle Bob) the concept of the Clean Code Developer (CCD) was born already some years ago. CCD is much likely to traditional martial arts where you create awareness of certain principles and learn how to apply practices to improve your style. The CCD initiative recommends to indicate your level of knowledge and experience with coloured wrist bands - equivalent to the belt colours - for various reasons. Frankly speaking, I think that the biggest advantage here is provided by the obvious recognition of conceptual understanding. For example, take the situation of a team meeting... A member with a higher grade in CCD, say Green grade, sees that there are mainly Red grades to talk to, and adjusts her way of communication to their level of understanding. The choice of words might change as certain elements of CCD are not yet familiar to all team members. So instead of talking in an abstract way which only Green grades could follow the whole scenario comes down to Red grade level. Different story, better results... Similar to learning martial arts, we only covered two grades during this occasion - black and red. Most interestingly, there was quite some positive feedback and lots of questions about the principles and practices of the red grade. And we gathered real-world examples from various craftsman and discussed them. Following the Clean Code Developer Red Grade and some annotations from our meetup: CCD Red Grade - Principles Don't Repeat Yourself - DRY Keep It Simple, Stupid (and Short) - KISS Beware of Optimisations! Favour Composition over Inheritance - FCoI Interestingly most of the attendees already heard about those key words but couldn't really classify or categorize them. It's very similar to a situation in which you do not the particular for a thing and have to describe it to others... until someone tells you the actual name and suddenly all is very simple. CCD Red Grade - Practices Follow the Boy Scouts Rule Root Cause Analysis - RCA Use a Version Control System Apply Simple Refactoring Pattern Reflect Daily Introduction to the principles and practices of Clean Code Developer - here: Red Grade As for the various ToDo's we commonly agreed that the Boy Scout Rule clearly is not limited to software development or IT administration but applies to daily life in general. Same for the root cause analysis, btw. We really had good stories with surprisingly endings and conclusions. A quick check about who is using a version control system brought more drive into the conversation. Not only that we had people that aren't using any VCS at all, we also had the 'classic' approach of backup folders and naming conventions as well as the VCS 'junkie' that has to use multiple systems at a time. Just for the records: Git and GitHub seem to be in favour of some of the attendees. Regarding the daily reflection at the end of the day we came up with an easy solution: Wrap it up as a blog entry! Certifications in IT This is kind of a controversy in IT in general. Is it interesting to go for certifications or are they completely obsolete? What are the possibilities to get certified? What are the options we have in Mauritius? How would certificates stand compared to other educational tracks like Computer Science or Web Design. The ratio between craftsmen with certifications like MCP, MSTS, CCNA or LPI versus the ones without wasn't in favour for the first group but there was a high interest in the topic itself and some were really surprised to hear that exam preparations are completely free available online including temporarily voucher codes for either discounts or completely free exams. Furthermore, we discussed possible options on forming so-called study groups on a specific certificates and organising more frequent meetups in order to learn together. Taking into consideration that we have sponsored access to the video course material of Pluralsight (and now PeepCode as well as TrainSignal), we might give it a try by the end of the year. Current favourites are LPIC Level 1 and one of the Microsoft exams 40-78x. Feedback and ideas for the MSCC The closing conversations and discussions about how the MSCC is recently doing, what are the possibilities and what's (hopefully) going to happen in the future were really fertile and I made a couple of mental bullet points which I'm looking forward to tackle down together with orher craftsmen. Eventually, it might be a good option to elaborate on some issues during our weekly Code & Coffee sessions one Wednesday morning. Active discussion on various IT topics like certifications (LPI, MCP, CCNA, etc) and sharing experience Finally, we made it till the end of the planned time. Well, actually the talk was still on and we continued even after 16:00hrs. Unfortunately, we (the children and I) had to leave for evening activities. My resume of the day... It was great to have 15 craftsmen in one room. There are hundreds of IT geeks out there in Mauritius, and as Mauritius Software Craftsmanship Community we still have a lot of work to do to pass on the message to some more key players and companies. Currently, it seems that we are able to attract a good number of students in Computer Science... but we have a lot more to offer, even or especially for IT people on the job. I'm already looking forward to our next Saturday meetup in the near future. PS: Meetup pictures are courtesy of Nirvan Pagooah. Thanks for sharing...

    Read the article

  • How to Clean Up and Fix Your Music Library with the MusicBrainz Database

    - by Erez Zukerman
    Over the years, some of us accumulate lots and lots of music files. Since these come from a variety of sources, they’re not always as neat as they could be. If your music library is in a bit of a jumble with tags missing, oddly named files and incomplete albums, read on to see how easy it is to make it neat once and for all. MusicBrainz is an online database that uses audio “fingerprints” to identify music tracks even when they’re incorrectly labelled. We’ll be using this database through a free client called Picard, available for Windows, Mac OS X and Linux. So first thing, head on over to Picard’s download page and get the installer. If you use Linux, you can install Picard using your package manager. Once you finish going through the installer, run Picard. Your firewall might pop up an alert telling you Picard is trying to access the Internet; you should agree to let Picard through. You will now see the main Picard interface. Click View > File browser (or press Ctrl+B). Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper] N64oid Brings N64 Emulation to Android Devices Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform]

    Read the article

  • Google Chrome for Mac, CSS colors and display profiles

    - by Trevor Burnham
    So, I'm aware that some browsers correct the colors in images in accordance with system settings, and that browsers differ in how they do this. But I'm very surprised when a color specified in a stylesheet appears different from one browser to another on the same system. With the latest Safari and Firefox, if I draw a div with background: #885500, I get a box with that color (as confirmed by the native DigitalColor Meter app): But when I load the same page in Chrome (Mac version 12.0.742.91) on the same system, a MacBook Pro with the default "Color LCD" display profile set, I get a noticeably different-colored box (DigitalColor Meter reports #a34d00—much more red, a bit less green): I tried a few different color profiles, and found that the color reported by DigitalColor Meter changed under Chrome. It stays constant in Safari. What's going on? Is it that Chrome is adjusting its colors depending on the system's display profile, or is it that Safari and Firefox are doing so? Does this happen under other operating systems, or is it purely a Mac phenomenon? And is there any way, from CSS/JavaScript, to detect/prevent this behavior so that colors are consistent across modern browsers on the same system?

    Read the article

  • Upgrading Visual Studio 2010

    - by Martin Hinshelwood
    I have been running Visual Studio 2010 as my main development studio on my development computer since the RC was released. I need to upgrade that to the RTM, but first I need to remove it. Microsoft have done a lot of work to make this easy, and it works. Its as easy as uninstalling from the control panel. I have had may previous versions of Visual Studio 2010 on this same computer with no need to rebuild to remove all the bits. Figure: Run the uninstall from the control panel to remove Visual Studio 2010 RC Figure: The uninstall removes everything for you.  Figure: A green tick means the everything went OK. If you get a red cross, try installing the RTM anyway and it should warn you with what was not uninstalled properly and you can remove it manually.   Once you have VS2010 RC uninstalled installing should be a breeze. The install for 2010 is much faster than 2008. Which could take all day, and then some on slower computers. This takes around 20 minutes even on my small laptop. I always do a full install as although I have to do c# I sometimes get to use a proper programming language VB.NET. Seriously, there is nothing worse than trying to open a project and the other developer has used something you don't have. Its not their fault. Its yours! Save yourself the angst and install Fully, its only 5.9GB. Figure: I always select all of the options.   Now go forth and develop! Preferably in VB.NET…   Technorati Tags: Visual Studio,VS2010,VS 2010

    Read the article

  • Windows Azure ASP.NET MVC 2 Role with Silverlight

    - by GeekAgilistMercenary
    I was working through some scenarios recently with Azure and Silverlight.  I immediately decided a quick walk through for setting up a Silverlight Application running in an ASP.NET MVC 2 Application would be a cool project. This walk through I have Visual Studio 2010, Silverlight 4, and the Azure SDK all installed.  If you need to download any of those go get em? now. Launch Visual Studio 2010 and start a new project.  Click on the section for cloud templates as shown below. After you name the project, the dialog for what type of Windows Azure Cloud Service Role will display.  I selected ASP.NET MVC 2 Web Role, which adds the MvcWebRole1 Project to the Cloud Service Solution. Since I selected the ASP.NET MVC 2 Project type, it immediately prompts for a unit test project.  Because I just want to get everything running first, I will probably be unit testing the Silverlight and just using the MVC Project as a host for the Silverlight for now, and because I would prefer to just add the unit test project later, I am going to select no here. Once you've created the ASP.NET MVC 2 project to host the Silverlight, then create another new project.  Select the Silverlight section under the Installed Templates in the Add New Project dialog.  Then select Silverlight Application. The next dialog that comes up will inquire about using the existing ASP.NET MVC Application I just created, which I do want it to use that so I leave it checked.  The options section however I do not want to check RIA Web Services, do not want a test page added to the project, and I want Silverlight debugging enabled so I leave that checked.  Once those options are appropriately set, just click on OK and the Silverlight Project will be added to the overall solution. The next steps now are to get the Silverlight object appropriately embedded in the web page.  First open up the Site.Master file in the ASP.NET MVC 2 Project located under the Veiws/Shared/ location.  After you open the file review the content of the <header></header> section.  In that section add another <contentplaceholder></contentplaceholder> tag as shown in the code snippet below. <head runat="server"> <title> <asp:ContentPlaceHolder ID="TitleContent" runat="server" /> </title> <link href="../../Content/Site.css" rel="stylesheet" type="text/css" /> <asp:ContentPlaceHolder ID="HeaderContent" runat="server" /> </head> I usually put it toward the bottom of the header section.  It just seems the <title></title> should be on the top of the section and I like to keep it that way. Now open up the Index.aspx page under the ASP.NET MVC 2 Project located in the Views/Home/ directory.  When you open up that file add a <asp:Content><asp:Content> tag as shown in the next snippet. <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Home Page </asp:Content>   <asp:Content ID=headerContent ContentPlaceHolderID=HeaderContent runat=server>   </asp:Content>   <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2><%= Html.Encode(ViewData["Message"]) %></h2> <p> To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC Website">http://asp.net/mvc</a>. </p> </asp:Content> In that center tag, I am now going to add what is needed to appropriately embed the Silverlight object into the page.  The first thing I needed is a reference to the Silverlight.js file. <script type="text/javascript" src="Silverlight.js"></script> After that comes a bit of nitty gritty Javascript.  I create another tag (and for those in the know, this is exactly like the generated code that is dumped into the *.html page generated with any Silverlight Project if you select to "add a test page that references the application".  The complete Javascript is below. function onSilverlightError(sender, args) { var appSource = ""; if (sender != null && sender != 0) { appSource = sender.getHost().Source; }   var errorType = args.ErrorType; var iErrorCode = args.ErrorCode;   if (errorType == "ImageError" || errorType == "MediaError") { return; }   var errMsg = "Unhandled Error in Silverlight Application " + appSource + "\n";   errMsg += "Code: " + iErrorCode + " \n"; errMsg += "Category: " + errorType + " \n"; errMsg += "Message: " + args.ErrorMessage + " \n";   if (errorType == "ParserError") { errMsg += "File: " + args.xamlFile + " \n"; errMsg += "Line: " + args.lineNumber + " \n"; errMsg += "Position: " + args.charPosition + " \n"; } else if (errorType == "RuntimeError") { if (args.lineNumber != 0) { errMsg += "Line: " + args.lineNumber + " \n"; errMsg += "Position: " + args.charPosition + " \n"; } errMsg += "MethodName: " + args.methodName + " \n"; }   throw new Error(errMsg); } I literally, since it seems to work fine, just use what is populated in the automatically generated page.  After getting the appropriate Javascript into place I put the actual Silverlight Object Embed code into the HTML itself.  Just so I know the positioning and for final verification when running the application I insert the embed code just below the Index.aspx page message.  As shown below. <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2> <%= Html.Encode(ViewData["Message"]) %></h2> <p> To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC Website"> http://asp.net/mvc</a>. </p> <div id="silverlightControlHost"> <object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%"> <param name="source" value="ClientBin/CloudySilverlight.xap" /> <param name="onError" value="onSilverlightError" /> <param name="background" value="white" /> <param name="minRuntimeVersion" value="4.0.50401.0" /> <param name="autoUpgrade" value="true" /> <a href="http://go.microsoft.com/fwlink/?LinkID=149156&v=4.0.50401.0" style="text-decoration: none"> <img src="http://go.microsoft.com/fwlink/?LinkId=161376" alt="Get Microsoft Silverlight" style="border-style: none" /> </a> </object> <iframe id="_sl_historyFrame" style="visibility: hidden; height: 0px; width: 0px; border: 0px"></iframe> </div> </asp:Content> I then open up the Silverlight Project MainPage.xaml.  Just to make it visibly obvious that the Silverlight Application is running in the page, I added a button as shown below. <UserControl x:Class="CloudySilverlight.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400">   <Grid x:Name="LayoutRoot" Background="White"> <Button Content="Button" Height="23" HorizontalAlignment="Left" Margin="48,40,0,0" Name="button1" VerticalAlignment="Top" Width="75" Click="button1_Click" /> </Grid> </UserControl> Just for kicks, I added a message box that would popup, just to show executing functionality also. private void button1_Click(object sender, RoutedEventArgs e) { MessageBox.Show("It runs in the cloud!"); } I then executed the ASP.NET MVC 2 and could see the Silverlight Application in page.  With a quick click of the button, I got a message box.  Success! Now the next step is getting the ASP.NET MVC 2 Project and Silverlight published to the cloud.  As of Visual Studio 2010, Silverlight 4, and the latest Azure SDK, this is actually a ridiculously easy process. Navigate to the Azure Cloud Services web site. Once that is open go back in Visual Studio and right click on the cloud project and select publish. This will publish two files into a directory.  Copy that directory so you can easily paste it into the Azure Cloud Services web site.  You'll have to click on the application role in the cloud (I will have another blog entry soon about where, how, and best practices in the cloud). In the text boxes shown, select the application package file and the configuration file and place them in the appropriate text boxes.  This is the part were it comes in handy to have copied the directory path of the file location.  That way when you click on browser you can just paste that in, then hit enter.  The two files will be listed and you can select the appropriate file. Once that is done, name the service deployment.  Then click on publish.  After a minute or so you will see the following screen. Now click on run.  Once the MvcWebRole1 goes green (the little light symbol to the left of the status) click on the Web Site URL.  Be patient during this process too, it could take a minute or two.  The Silverlight application should again come up just like you ran it on your local machine. Once staging is up and running, click on the circular icon with two arrows to move staging to production.  Once you are done make sure the green light is again go for the production deploy, then click on the Web Site URL to verify the site is working.  At this point I had a successful development, staging, and production deployment. Thanks for reading, hope this was helpful.  I have more Windows Azure and other cloud related material coming, so stay tuned. Original Entry

    Read the article

  • Panning with the OpenGL Camera / View Matrix

    - by Pris
    I'm gonna try this again I've been trying to setup a simple camera class with OpenGL but I'm completely lost and I've made zero progress creating anything useful. I'm using modern OpenGL and the glm library for matrix math. To get the most basic thing I can think of down, I'd like to pan an arbitrarily positioned camera around. That means move it along its own Up and Side axes. Here's a picture of a randomly positioned camera looking at an object: It should be clear what the Up (Green) and Side (Red) vectors on the camera are. Even though the picture shows otherwise, assume that the Model matrix is just the identity matrix. Here's what I do to try and get it to work: Step 1: Create my View/Camera matrix (going to refer to it as the View matrix from now on) using glm::lookAt(). Step 2: Capture mouse X and Y positions. Step 3: Create a translation matrix mapping changes in the X mouse position to the camera's Side vector, and mapping changes in the Y mouse position to the camera's Up vector. I get the Side vector from the first column of the View matrix. I get the Up vector from the second column of the View matrix. Step 4: Apply the translation: viewMatrix = glm::translate(viewMatrix,translationVector); But this doesn't work. I see that the mouse movement is mapped to some kind of perpendicular axes, but they're definitely not moving as you'd expect with respect to the camera. Could someone please explain what I'm doing wrong and point me in the right direction with this camera stuff?

    Read the article

  • Building Publishing Pages in Code

    - by David Jacobus
    Originally posted on: http://geekswithblogs.net/djacobus/archive/2013/10/27/154478.aspxOne of the Mantras we developers try to follow: Ensure that the solution package we deliver to the client is complete.  We build Web Parts, Master Pages, Images, CSS files and other artifacts that we push to the client with a WSP (Solution Package) And then we have them finish the solution by building their site pages by adding the web parts to the site pages.       I am a proponent that we,  the developers,  should minimize this time consuming work and build these site pages in code.  I found a few blogs and some MSDN documentation but not really a complete solution that has all these artifacts working in one solution.   What I am will discuss and provide a solution for is a package that has: 1.  Master Page 2.  Page Layout 3.  Page Web Parts 4.  Site Pages   Most all done in code without the development team or the developers having to finish up the site building process spending a few hours or days completing the site!  I am not implying that in Development we do this. In fact,  we build these pages incrementally testing our web parts, etc. I am saying that the final action in our solution is that we take all these artifacts and add them to the site pages in code, the client then only needs to activate a few features and VIOLA their site appears!.  I had a project that had me build 8 pages like this as part of the solution.   In this blog post, I am taking a master page solution that I have called DJGreenMaster.  On My Office 365 Development Site it looks like this:     It is a generic master page for a SharePoint 2010 site Along with a three column layout.  Centered with a footer that uses a SharePoint List and Web Part for the footer links.  I use this master page a lot in my site development!  Easy to change the color and site logo with a little CSS.   I am going to add a few web parts for discussion purposes and then add these web parts to a site page in code.    Lets look at the solution package for DJ Green Master as that will be the basis project for building the site pages:   What you are seeing  is a complete solution to add a Master Page to a site collection which contains: 1.  Master Page Module which contains the Master Page and Page Layout 2.  The Footer Module to add the Footer Web Part 3.  Miscellaneous modules to add images, JQuery, CSS and subsite page 4.  3 features and two feature event receivers: a.  DJGreenCSS, used to add the master page CSS file to Style Sheet Library and an Event Receiver to check it in. b.  DJGreenMaster used to add the Master Page and Page Layout.  In an Event Receiver change the master page to DJGreenMaster , create the footer list and check the files in. c.  DJGreenMasterWebParts add the Footer Web Part to the site collection. I won’t go over the code for this as I will give it to you at the end of this blog post. I have discussed creating a list in code in a previous post.  So what we have is the basis to begin what is germane to this discussion.  I have the first two requirements completed.  I need now to add page web parts and the build the pages in code.  For the page web parts, I will use one downloaded from Codeplex which does not use a SharePoint custom list for simplicity:   Weather Web Part and another downloaded from MSDN which is a SharePoint Custom Calendar Web Part, I had to add some functionality to make the events color coded to exceed the built-in 10 overlays using JQuery!    Here is the solution with the added projects:     Here is a screen shot of the Weather Web Part Deployed:   Here is a screen shot of the Site Calendar with JQuery:     Okay, Now we get to the final item:  To create Publishing pages.   We need to add a feature receiver to the DJGreenMaster project I will name it DJSitePages and also add a Event Receiver:       We will build the page at the site collection level and all of the code necessary will be contained in the event receiver.   Added a reference to the Microsoft.SharePoint.Publishing.dll contained in the ISAPI folder of the 14 Hive.   First we will add some static methods from which we will call  in our Event Receiver:   1: private static void checkOut(string pagename, PublishingPage p) 2: { 3: if (p.Name.Equals(pagename, StringComparison.InvariantCultureIgnoreCase)) 4: { 5: 6: if (p.ListItem.File.CheckOutType == SPFile.SPCheckOutType.None) 7: { 8: p.CheckOut(); 9: } 10:   11: if (p.ListItem.File.CheckOutType == SPFile.SPCheckOutType.Online) 12: { 13: p.CheckIn("initial"); 14: p.CheckOut(); 15: } 16: } 17: } 18: private static void checkin(PublishingPage p,PublishingWeb pw) 19: { 20: SPFile publishFile = p.ListItem.File; 21:   22: if (publishFile.CheckOutType != SPFile.SPCheckOutType.None) 23: { 24:   25: publishFile.CheckIn( 26:   27: "CheckedIn"); 28:   29: publishFile.Publish( 30:   31: "published"); 32: } 33: // In case of content approval, approve the file need to add 34: //pulishing site 35: if (pw.PagesList.EnableModeration) 36: { 37: publishFile.Approve("Initial"); 38: } 39: publishFile.Update(); 40: }   In a Publishing Site, CheckIn and CheckOut  are required when dealing with pages in a publishing site.  Okay lets look at the Feature Activated Event Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3:   4:   5:   6: object oParent = properties.Feature.Parent; 7:   8:   9:   10: if (properties.Feature.Parent is SPWeb) 11: { 12:   13: currentWeb = (SPWeb)oParent; 14:   15: currentSite = currentWeb.Site; 16:   17: } 18:   19: else 20: { 21:   22: currentSite = (SPSite)oParent; 23:   24: currentWeb = currentSite.RootWeb; 25:   26: } 27: 28:   29: //create the publishing pages 30: CreatePublishingPage(currentWeb, "Home.aspx", "ThreeColumnLayout.aspx","Home"); 31: //CreatePublishingPage(currentWeb, "Dummy.aspx", "ThreeColumnLayout.aspx","Dummy"); 32: }     Basically we are calling the method Create Publishing Page with parameters:  Current Web, Name of the Page, The Page Layout, Title of the page.  Let’s look at the Create Publishing Page method:   1:   2: private void CreatePublishingPage(SPWeb site, string pageName, string pageLayoutName, string title) 3: { 4: PublishingSite pubSiteCollection = new PublishingSite(site.Site); 5: PublishingWeb pubSite = null; 6: if (pubSiteCollection != null) 7: { 8: // Assign an object to the pubSite variable 9: if (PublishingWeb.IsPublishingWeb(site)) 10: { 11: pubSite = PublishingWeb.GetPublishingWeb(site); 12: } 13: } 14: // Search for the page layout for creating the new page 15: PageLayout currentPageLayout = FindPageLayout(pubSiteCollection, pageLayoutName); 16: // Check or the Page Layout could be found in the collection 17: // if not (== null, return because the page has to be based on 18: // an excisting Page Layout 19: if (currentPageLayout == null) 20: { 21: return; 22: } 23:   24: 25: PublishingPageCollection pages = pubSite.GetPublishingPages(); 26: foreach (PublishingPage p in pages) 27: { 28: //The page allready exists 29: if ((p.Name == pageName)) return; 30:   31: } 32: 33:   34:   35: PublishingPage newPage = pages.Add(pageName, currentPageLayout); 36: newPage.Description = pageName.Replace(".aspx", ""); 37: // Here you can set some properties like: 38: newPage.IncludeInCurrentNavigation = true; 39: newPage.IncludeInGlobalNavigation = true; 40: newPage.Title = title; 41: 42: 43:   44:   45: 46:   47: //build the page 48:   49: 50: switch (pageName) 51: { 52: case "Homer.aspx": 53: checkOut("Courier.aspx", newPage); 54: BuildHomePage(site, newPage); 55: break; 56:   57:   58: default: 59: break; 60: } 61: // newPage.Update(); 62: //Now we can checkin the newly created page to the “pages” library 63: checkin(newPage, pubSite); 64: 65: 66: }     The narrative in what is going on here is: 1.  We need to find out if we are dealing with a Publishing Web.  2.  Get the Page Layout 3.  Create the Page in the pages list. 4.  Based on the page name we build that page.  (Here is where we can add all the methods to build multiple pages.) In the switch we call Build Home Page where all the work is done to add the web parts.  Prior to adding the web parts we need to add references to the two web part projects in the solution. using WeatherWebPart.WeatherWebPart; using CSSharePointCustomCalendar.CustomCalendarWebPart;   We can then reference them in the Build Home Page method.   Let’s look at Build Home Page: 1:   2: private static void BuildHomePage(SPWeb web, PublishingPage pubPage) 3: { 4: // build the pages 5: // Get the web part manager for each page and do the same code as below (copy and paste, change to the web parts for the page) 6: // Part Description 7: SPLimitedWebPartManager mgr = web.GetLimitedWebPartManager(web.Url + "/Pages/Home.aspx", System.Web.UI.WebControls.WebParts.PersonalizationScope.Shared); 8: WeatherWebPart.WeatherWebPart.WeatherWebPart wwp = new WeatherWebPart.WeatherWebPart.WeatherWebPart() { ChromeType = PartChromeType.None, Title = "Todays Weather", AreaCode = "2504627" }; 9: //Dictionary<string, string> wwpDic= new Dictionary<string, string>(); 10: //wwpDic.Add("AreaCode", "2504627"); 11: //setWebPartProperties(wwp, "WeatherWebPart", wwpDic); 12:   13: // Add the web part to a pagelayout Web Part Zone 14: mgr.AddWebPart(wwp, "g_685594D193AA4BBFABEF2FB0C8A6C1DD", 1); 15:   16: CSSharePointCustomCalendar.CustomCalendarWebPart.CustomCalendarWebPart cwp = new CustomCalendarWebPart() { ChromeType = PartChromeType.None, Title = "Corporate Calendar", listName="CorporateCalendar" }; 17:   18: mgr.AddWebPart(cwp, "g_20CBAA1DF45949CDA5D351350462E4C6", 1); 19:   20:   21: pubPage.Update(); 22:   23: } Here is what we are doing: 1.  We got  a reference to the SharePoint Limited Web Part Manager and linked/referenced Home.aspx  2.  Instantiated the a new Weather Web Part and used the Manager to add it to the page in a web part zone identified by ID,  thus the need for a Page Layout where the developer knows the ID’s. 3.  Instantiated the Calendar Web Part and used the Manager to add it to the page. 4. We the called the Publishing Page update method. 5.  Lastly, the Create Publishing Page method checks in the page just created.   Here is a screen shot of the page right after a deploy!       Okay!  I know we could make a home page look much better!  However, I built this whole Integrated solution in less than a day with the caveat that the Green Master was already built!  So what am I saying?  Build you web parts, master pages, etc.  At the very end of the engagement build the pages.  The client will be very happy!  Here is the code for this solution Code

    Read the article

  • Get the MakeUseOf eBook Guide to Hacker Proofing Your PC

    - by ETC
    If you’re interested in checking out a solid overview of PC security best practices and tips, our friends over at MakeUseOf.com have released another free book in their computer-oriented eBook series. The fifty-page ebook HackerProof: Your Guide to PC Security covers a variety of topics including types of malware, operating systems and their inherent vulnerabilities, security best practices, tools for protecting your PC, the importance of security prep and backups, and recovering from malware attacks. It’s a nice and compact text, perfect for brushing up on security best practices for your own machine or sending to friends and relatives that could use a little after-school tutoring on keeping their computer secure and out of trouble. The best tip from the book? The overall message to be cautious and be preemptive in your security efforts is a great meta-tip to take away. Up-to-date definition files and a healthy sense of random links and emails attachments goes a long, long way towards staying safe. HackerProof: Your Guide to PC Security [Direct Link via MakeUseOf] Latest Features How-To Geek ETC How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? Get the MakeUseOf eBook Guide to Hacker Proofing Your PC Sync Your Windows Computer with Your Ubuntu One Account [Desktop Client] Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper]

    Read the article

  • Webcast: June 29th at 11am Eastern - Optimize ePermitting Reviews & Approvals with AutoVue

    - by Warren Baird
    I'm pleased to announce that the Enterprise Visualization special interest group (SIG) is organizing it's first webcast on June 29th - Palm Beach County is going to present how they use AutoVue as part of their e-permitting processes.  This is a must-see for anyone in the Public Sector, but even for people who aren't in the Public Sector, it should be very interesting to see how Palm Beach County has tied AutoVue tightly into their business processes.If you haven't already done so, I'd suggest joining up for our SIG at http://groups.google.com/group/enterprise_visualization_sig.The registration link for the webcast is: https://www3.gotomeeting.com/register/565294190 - more details are below:The Enterprise Visualization Special Interest Group (EVSIG) is proud to present the first in a series of webcasts designed to educate the AutoVue user community on innovative and compelling AutoVue solutions.  Attend the Webcast and discover how AutoVue can make building permit application and approval processes more efficient.Presenters:Oracle: Warren Baird, Principal Product Manager, AutoVue Enterprise VisualizationPalm Beach County: Paul Murphy, Systems IntegratorLaura Yonkers, Permit Section SupervisorChuck Lemon, Project Business AnalystAbstract:In their efforts to deliver better services to citizens, save money and “think green”, many cities, states and local governments have implemented online e-permitting processes that allow developers and citizens to apply for and receive building permits via the Web.Attend this webcast and discover how AutoVue visualization solutions enhance ePermitting processes by streamlining the review and approval of digital permit applications.  Hear from Palm Beach County about how they leveraging AutoVue within their ePermitting system to:·         provide structure to the land development review and approval process·         accelerate and improve efficiency throughout the permitting process·         decrease permit review times·         increase the level of transparency during the permit application and review process·         improve accountability in the organization·         improve citizen services by providing 24-7 ability to submit and track applicationsSign up for the Enterprise Visualization SIG to learn about future AutoVue Webcasts. Register today at http://groups.google.com/group/enterprise_visualization_sig and become a part of our growing online user community. We look forward to seeing you on the 29th of June.

    Read the article

  • My New Job

    - by Stuart Brierley
    Last year I started a new job with a logistics company in the North of England, where I was responsible for the management, design and development of IT Integration strategies, architectures and solutions using BizTalk Server 2009.  This included the design and implementation of the BizTalk Server 2009 infrastructure, the definition of development standards, mentoring a fellow developer in the ways of BizTalk and migrating a number of existing solutions from Softshare over to BizTalk 2009. Unfortunately I then realised that, following this initial set up, there didn't actually seem to be that much BizTalk work for me to get stuck into and reluctantly I have now moved on from this role to a very similar role with the country's largest office supplies company.  Based in Sheffield, we distribute office supplies on a UK wide basis and computer supplies across Europe. The situation here is slightly different than when I first joined my previous employer.  Whereas that was a green field installation with no previous BizTalk solutions in place, my new employer currently has a number of live BizTalk 2000 (!) and BizTalk 2006 solutions in place.  Unfortunately the infrastructure around these is less than ideal; with no clear distinction between development and test environments and no source control what so ever! We are currently building a proposal for a new BizTalk Server 2010 implementation, where I am hopeful of being able to implement fully independent development, test and pseudo-live environments, alongside an enterprise level live installation.  We should also be introducing Team Foundation Server to the development process, thereby giving us some much needed source control capabilities. Following this is likely to be a period of migration for the existing BizTalk Solutions, along with the onward development of new projects and initiatives - I'm hoping to be a busy man for the forseeable future :o)

    Read the article

  • Pygame surfaces and their Rects

    - by Jaka Novak
    I am trying to understand how pygame surfaces work. I am confused about Rect position of Surface object. If I try blit surface on screen at some position then Surface is drawn at right position, but Rect of the surface is still at position (0, 0)... I tried write my own surface class with new rect, but i am not sure if is that right solution. My goal is that i could move surface like image with rect.move() or something like that. If there is any solution to do that i would be happy to read it. Thanks for answer and time for reading this awful English If helps i write some code for better understanding my problem. (run it first, and then uncomment two lines of code and run again to see the diference): import pygame from pygame.locals import * class SurfaceR(pygame.Surface): def __init__(self, size, position): pygame.Surface.__init__(self, size) self.rect = pygame.Rect(position, size) self.position = position self.size = size def get_rect(self): return self.rect def main(): pygame.init() screen = pygame.display.set_mode((640, 480)) pygame.display.set_caption("Screen!?") clock = pygame.time.Clock() fps = 30 white = (255, 255, 255) red = (255, 0, 0) green = (0, 255, 0) blue = (0, 0, 255) surface = pygame.Surface((70,200)) surface.fill(red) surface_re = SurfaceR((300, 50), (100, 300)) surface_re.fill(blue) while True: for event in pygame.event.get(): if event.type == QUIT: return 0 screen.blit(surface, (100,50)) screen.blit(surface_re, surface_re.position) #pygame.draw.rect(screen, white, surface.get_rect()) #pygame.draw.rect(screen, white, surface_re.get_rect()) pygame.display.update() clock.tick(fps) if __name__ == "__main__": main()

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >