Search Results

Search found 1390 results on 56 pages for 'ntfs'.

Page 53/56 | < Previous Page | 49 50 51 52 53 54 55 56  | Next Page >

  • Cloning to a smaller hard drive with DDRescue

    - by krebshack
    I am currently working with a 700 GB Seagate hard drive that's beginning to fail. I'll call this "SDB" from now on. I'd like to clone it while I'm still able to. However, the only hard drive that I have available is a 500 GB WD hard drive. I'll call this "SDC" from now on. The partition scheme on SDB is as follows: 9.77 GB is allocated to a recovery partition and the remaining 688.87 GB is allocated to a Windows partition. Both are formatted using NTFS. There is no partition scheme on SDC. I know how to clone one hard drive to another using DDRescue but I've only done it using hard drives that are the same size. For your reference, I'll normally use the command "ddrescue -v -r 3 /dev/sdb /dev/sdc example.log". I'd like to know if it's possible to do this with DDRescue. I've read the manual from GNU (http://www.gnu.org/software/ddrescue/manual/ddrescue_manual.html) and I haven't seen anything indicating that it is possible. I'm just looking for some confirmation that this is a correct impression. If it's not possible, then it would be helpful if any of y'all would be able to make some work around suggestions. But please don't feel obligated to do that. I don't want to have my one thread bogged down with two many questions.

    Read the article

  • Why does my simple Raid 1 backup storage perform really slow sometimes?

    - by randomguy
    I bought 2x Samsung F3 EcoGreen 2TB hard disks to make a backup storage. I put them in Raid 1 (mirror) mode. Made a single partition and formatted it to NTFS, running Windows 7. For some reason, accessing the drive's contents (simply by navigating folders) is sometimes really slow. Like opening D:/photos/ can sometimes take several seconds before it starts showing any of the folder's contents. Same applies for other folders. What could be causing this and what could I do to improve the performance? I remember that there was an option somewhere inside Windows to choose fast access but less reliable persistence operations (read/write). It was a tick inside some dialog. At the time, it felt like a good idea to take the tick away from the option and get more reliable persistence but slower access, but now I'm regretting. I'm unable to find this dialog.. I've looked hard. I don't know, if it would make any difference. Oh, and I've ran scan disk and defrag on the drive. No errors and speed isn't improved.

    Read the article

  • Encrypted Windows 7 & Linux Advice Wanted

    - by Miles
    I would like to set up my laptop to dual boot Arch Linux and Windows 7 with file sharing and encryption. Just wanted some advice on going about this because I have not dealt with encryption nor file sharing. I have two 500GB hard drives, and this is my plan: Install Windows 7 across both hard drives Use a live CD to wipe out Windows boot loader and replace with Grub Legacy Use live CD to wipe out second hard drive and re-size the Windows partition located on first hard drive Install Arch Linux along side with Windows 7 on first hard drive, all remaining space goes to home folder as ext2 Install truecrypt and ext2fsd Concerns: Is this the most efficient way to share files between both OSes? Or should I just be using NTFS to store all my data? How would the file permissions work when sharing files between Windows and Linux? Is there a high likley hood of corruption, and what is the ease of backing up files from an encrypted disk? Anything I should look out for, conflict between Grub and Truecrypt? Thank you for any advice, and feel free to post any links you might find useful to me. I am trying to plan this out so I can minimize downtime as I do not want to spend more than a night on this, nor do I want to run into a major problem some time in the future.

    Read the article

  • Seagate 3TB hard drive loses format information

    - by Victor Bugarin
    I have a Windows 7x64 Ultimate, 6 GB memory, 1 TB HD. 3TB Barracuda XT HDD. The HDD is installed on a StarTech 4 bays external enclosure I had troubles so I converted to a GPT, created 1 partition and formatted as NTFS. The hard drive I can write and read to and from the hard drive but it will become unreadable at some point while I am copying files or after I have copied files to it. I have copied large Bluray movies and diverse video files, I have also copied 32 GB of pictures, and I have copied about 86 thousand music files in different formats. At some point the partition becomes unreadable and I have to format the partition again (all files lost) and I have to start the whole process again. At some point I have been unable to copy large ISO (Bluray movies) file images. I have partitioned the HDD in 2 partitions P1 - 2TB, P2 - 1TB and I have lost every single file in either partition the same way. I reformat the HDD and it seems fine. I have run seatools to check the hard drive and it reports to be OK. What gives?

    Read the article

  • In need of assistance for recovering a lost partition

    - by Tek
    The program that has worked for the most part is Active@ Partition Recovery. I'm so close but yet so far from recovering my data. Okay so here's what happens. In the following screenshot (blanked out a folder and filename with profanity in case some of you guys are at work :P), it detects the partition I accidentally deleted with ALL 100% of my data listed. Of course, I didn't write ANY data to that drive after I did this. But when I click "recover" and finishes the recovery process, in Windows I click on the partition that was just was just recovered... It's EMPTY. The program seems to be able to see my lost files, but when I recover the partition windows doesn't seem to think the same =( Things I tried: I tried running a chkdsk /r /f after I recovered the partition, apparently it couldn't find any errors. Tried using other software like TestDisk to recover the partition, but they (all) act similar to Windows in that it detects the (missing) partition but when I browse it there's no files. The partition is there along with all the file and data information. The sector information is also in the screenshot, is there any way I can use this to my advantage in recovering my data? Other information: Dualboot: Win8 / Ubuntu 12.10 x64 1TB Internal desktop drive, GPT Layout, NTFS formatted drive, 64K allocation size.

    Read the article

  • Disk fragmentation when dealing with many small files

    - by Zorlack
    On a daily basis we generate about 3.4 Million small jpeg files. We also delete about 3.4 Million 90 day old images. To date, we've dealt with this content by storing the images in a hierarchical manner. The heriarchy is something like this: /Year/Month/Day/Source/ This heirarchy allows us to effectively delete days worth of content across all sources. The files are stored on a Windows 2003 server connected to a 14 disk SATA RAID6. We've started having significant performance issues when writing-to and reading-from the disks. This may be due to the performance of the hardware, but I suspect that disk fragmentation may be a culprit at well. Some people have recommended storing the data in a database, but I've been hesitant to do this. An other thought was to use some sort of container file, like a VHD or something. Does anyone have any advice for mitigating this kind of fragmentation? Additional Info: The average file size is 8-14KB Format information from fsutil: NTFS Volume Serial Number : 0x2ae2ea00e2e9d05d Version : 3.1 Number Sectors : 0x00000001e847ffff Total Clusters : 0x000000003d08ffff Free Clusters : 0x000000001c1a4df0 Total Reserved : 0x0000000000000000 Bytes Per Sector : 512 Bytes Per Cluster : 4096 Bytes Per FileRecord Segment : 1024 Clusters Per FileRecord Segment : 0 Mft Valid Data Length : 0x000000208f020000 Mft Start Lcn : 0x00000000000c0000 Mft2 Start Lcn : 0x000000001e847fff Mft Zone Start : 0x0000000002163b20 Mft Zone End : 0x0000000007ad2000

    Read the article

  • Help in recovering partition

    - by goshopedero
    Okay so i had one NTFS partition and i wanted to resize it, but while resizing it with partition magic some error occurred and now i am not able to enter in my partition anymore. I have slackware 13 also and i tried mounting the partition from there but it didn't succeed. One friend of mine came to my house with some live-cd os called backtrack3 and when he booted from cd, he was able to mount the damaged partition - and was able to read/write on it anywhere. I saw my files, they are all there, so nothing's erased just the partition is somehow damaged. But strange thing was that from backtrack we weren't able to mount some of the working partitions of my comp, and we could mount the damaged one. So i am asking for some help here: My files are all there, and i saw them from backtrack. What can i do to fix the partition so it would be usable from windows/slackware again ? Please tell me anything you've got because i have some important data on it. Thank you.

    Read the article

  • How to copy VirtualBox VDI contents to a partition and dual boot the OS from it?

    - by Calmarius
    I'm a Linux user but I keep a compressed Windows XP ISO with me on a pen drive for the case I absolutely need Windows to do something. This works in VirtualBox most of the time. But now I want to play some games, so I would like to run the Windows image natively. My computer don't have CD drive so cannot just burn the ISO and make an install normally. What I trying to do is moving the installed Windows image to a physical NTFS partition on my HDD and set up GRUB to let me dual boot it. I found many tutorials that deal with making VDI to physical drive. But they assume I want to overwrite my entire drive. Moving the raw disk image with dd to the partition resulted in a corrupt partition. I also tried the VMDK trick to use that empty partition and install the Windows on it. Although the text mode phase of the installation finishes without problems, the VM won't work, either crashes and keeps rebooting or just immediately or freezes (depending on how I created the VMDK, with -rawdisk /dev/sda3 or -rawdisk /dev/sda -partition 3).

    Read the article

  • Install Debian stable linux ISO from USB to dual boot Windows

    - by tgkprog
    I want debian as dual boot with my windows vista, Free'd up 50GB in my d drive. Plan to use 40 for debian install, 6GB for swap space Have a 16GB USB drive Downloaded http://unetbootin.sourceforge.net/ Downloaded DVD files of stable debian-7.0.0-amd64-DVD-1.iso ( debian-7.0.0-amd64-DVD-2.iso and 3) After I choose HD install, unetbootin says place the ISO in the same place. but I have 3. do i need to merge them? if so any freeware to do that? can i do it with 7zip? when I extract with 7 zip there are classes between the 3 ISO files. Just over write? Options to merge (format etc for 7zip) ? Or I must use I tried to keep the 3 files with the other unetbootin files but get an error msg Files I have on my USB 06/30/2013 11:44 PM 2,835,648 ubnkern 06/05/2013 12:14 AM 3,998,007,296 debian-7.0.0-amd64-DVD-1.iso 06/04/2013 03:30 PM 4,696,872,960 debian-7.0.0-amd64-DVD-2.iso 06/05/2013 01:25 AM 4,698,955,776 debian-7.0.0-amd64-DVD-3.iso 06/30/2013 11:45 PM 6,530,278 ubninit 06/30/2013 11:46 PM 155 syslinux.cfg 06/30/2013 11:46 PM 60,928 menu.c32 also i can only copy above files if i format my USB as NTFS On FAT32 says too large to copy .iso How do I get around that? My internet needs a login so cannot do net install

    Read the article

  • How to protect folder privacy against unethical network administrators? [closed]

    - by Trevor Trovalds
    I just need a technical solution for the sake of my group's shared passwords, projects, works, etc. safety. Our network has Active Directory with public/groups/users and NTFS permissions, under a Windows Server 2003 which will soon migrate to Windows Server 2008 R2. Our IT crowd is small, consisting of 2 DBAs, 4 designers, 6 developers (including me), 2 netadmins and (a lot of) tech supporters, everyone has local admin rights. Those 2 network admins weren't the ones who set the network up, they just took the lift recently when the previous ones quit. We usually find them laughing at private contents from users stored in the groups AD, sabotaging documents that don't match their personal tastes and, finally, this week we found out they stole a project we (developers and DBAs) were finishing and, long before, they presented it to the CEO as theirs without us knowing. I'm a systems analyst, and initially my group decided to store critical content, like shared passwords, inside encrypted .zip files. Unfortunately we couldn't do the same to the other hundreds of folders and files, which included the stolen project, because the zipping process would take too long for every update. We also tried an encrypted Subversion repository under SSL, but there are many dummies (~38 atm) involved in the projects that have trouble using TortoiseSVN when contributing, and very oftenly we had to fix messed up updates. Well, I think these two give the idea of what we've been trying to reach. So, is there a practical "individual" protection for our extensive data or my hope can already be euthanized? P.S.: Seriously, at the place where I live/work, political corruption gone the wildest, so denounce related options are likely impracticable. Yet both netadmins have strong "political bond" with the CEO and the President, hence their lousy behavior and our failed delation attempts.

    Read the article

  • HDD dead forever???

    - by Roberto
    Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken, it couldn't be recognized by the BIOS. I have another of the same hd, so I exchanged the boards. I found out that there is a problem on its board since my good hd didn't work. But the broken hd doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hd is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hd but with the wrong size (2TB). I try to make it read the hd but it get an I/O error reading sector. It tries to read, the hd spins... So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do recover the files from it?

    Read the article

  • Network external hard drive reports not enough free space

    - by mzhang
    I'm running an Ubuntu (10.04) Samba server on a local network. The server has a 50GB internal drive with only 24MB free. I've shared a folder /samba from that drive. I also have a 1TB NTFS external hard drive mounted to the system. There is a symbiotic link from the Samba shared folder on the nearly-full internal drive to the plenty-of-free-space external drive (i.e. /samba/external_hd). I wish to copy a 3.25GB folder into the (remote) external hard drive, via a Mac (10.6.8). The Mac reports (correctly) that there's 24MB free on the server, and so will not let me copy the folder on the Mac over to the external drive (dragging the folder into /samba/external_hd), failing with a "server does not have enough free space" error. However, it seems that I can still scp the folder into the external drive, via the symbolic link. Is there a reason as to why this is happening (and are there any ways to prevent it)? Is this even good practice (to mount a drive and link into the directory)?

    Read the article

  • How To Completely Move Users/Program Files/Program Files (x86)/ProgramData (Folders) To Another Partition(s) On Windows 8?

    - by Enigma83
    I am attempting to move folders Users Program Files Program Files (x86), ProgramData (at the root of the C drive) to at least 2 other partitions, preferably on a fresh install. I have read that there are methods for doing this post-install, but it seems like it would be a bit more tedious to do things that way. I want to move the 2 Program Files folders to another partition on the same HDD, and Users/ProgramData will go to yet another partition on same HDD. I have done a bit of research on this, read up on some things that involved booting into Audit Mode, using the RoboCopy command to copy folders via booting into my Windows 8 USB drive, creating NTFS junctions/symbolic links, Registry edits, as well as accomplishing this automatically by creating an auto-attend file which Windows Setup processes automatically before the user is ever booted in for the 1st time. I tried this morning and now have a basic installation in which programs like Internet Explorer fail to open, certain files can't be found/opened (even if I click on them directly), an example is Regedit. Also, I can't run the Command/DOS (CMD) prompt as Administrator (or otherwise, as any other user), can't activate the real Administrator account or open any of the Administrative Tools (despite having added them to my Start Screen). So far I have only tried RoboCopy-ing Program Files and Program Files (x86) so far, creating junction points for them, and editing the Registry in the relevant locations. This is what I'm left with now. I also found the following blog article which describes how to do this for Windows 7 So, where should I go from here and where can I find more information? And how can this be done without disabling the Metro apps, which I've read will stop working if you move ProgramData. Once I have everything moved, where do I install programs to? Do I tell them to install to C:\Program Files\Program Files (x86) or to the junctioned/symbolic-linked partition/drive? I plan to test in VMware virtual machines from here on until things are working correctly, while using a baseline default install for daily tasks.

    Read the article

  • Windows 7: moved system partition, need to update boot partition

    - by Actorclavilis
    So, I have a decently standard Windows7/Ubuntu dual-boot setup, and (since Ubuntu is my usual operating system) I found I needed to grow my Ubuntu partition and shrink my W7 partition. Originally, my system (500G) looked like this: W7 Boot Partition (1.5G) Ubuntu (around 240G) W7 (same as Ubuntu) (on an extended partition, all by itself) Swap (rest of disk, around 16G) Now I'm no stranger to partitioning and filesystem tools, especially GParted, which I used on a Linux boot disk. After my partition editing, the partitions are laid out the same, except the Ubuntu partition is now 407G and the W7 partition is smaller to compensate. I had supposed, based on http://www.gparted.org/faq.php, that I would be able to run the W7 install disk in recovery mode and have it deal with the rearrangement, then possibly reinstall GRUB or something. Well, now the W7 install disk doesn't even see my W7 installation. All my files are there, the NTFS is perfectly clean, no problems there, but the install disk won't notice it. (Of course, the GRUB entry works fine but the W7 boot partition (which I didn't change) refuses to boot it.) So, basically, any ideas on how to fix this? I don't especially want to rerun the entire install procedure because I'll have a bunch of programs to reinstall (never mind redoing GRUB), but I fear that might be the only option. Thanks.

    Read the article

  • Formatting a former RAID 0 drive through USB

    - by EXC
    I'll try to be as specific as possible here: I was using two Hitachi 2.5" 500 gb HDDs in my Gateway P-7805u laptop in a RAID 0 configuration. The array was causing the laptop to run extremely hot, however, so I removed them and deleted the RAID array through Intel Matrix HDD manager. I did a clean install of Windows 7 on the original 320 gb HDD that came with the laptop. I never did format the original RAID array HDDs before taking them out of the computer. Now, I am attempting to format the Hitachi 500 gb RAID array HDDs externally through a USB external enclosure. The external HDD drivers install on my clean install OS, but when I go into 'My Computer' there is no external drive available. I cannot format in CMD Prompt because my computer will not designate a drive letter to the external HDD. The drivers install and the HDD is recognized as a Hitachi external drive, but nothing seems to show up in my computer window. I need to know if there is a way to format these drives to NTFS externally.

    Read the article

  • SSD won't boot anymore

    - by LordrAider
    Yesterday I put the computer to sleep. Something went wrong because it didn't go fully to sleep. So I restarted the pc and now it won't boot windows 7 anymore. It said : "Please insert valid boot device". I ran Windows 7 restore disc and tried restoring, first it said, mbr fixed. No result but now it said : "Operating system could not be loaded" I ran Windows 7 restore disc again and then it said something about a corrupt partition and that he fixed it. But got the same msg at restart about operating system not found. I ran Windows 7 restore disc again and used diskpart and watched the volumes. My SSD shows up as RAW filesystem... not as NTFS. The size of the disk seems correct. In the bios it also shows up as Healthy disk. What could went wrong and could I recover data with testdisk? I assume something went wrong with the partition :(. It's a Plextor SSD 256M2P SSD, only 3 months old. Thx in advance

    Read the article

  • How can I tell System Restore in WIndows 7 recovery console to use my recovered backup drive's restore point data?

    - by Rich Shealer
    My Windows 7 desktop PC failed to boot. It would get to a grayish screen with a mouse and would only respond to the power button. After much examination I found that the problem was not a failed drive as running CHKDSK from the Recovery Console on my main drives passed without any errors. I had been installing various Java version in the days before the failure so I decided to use a restore point to roll backwards. I have an external SATA drive controller with two 2 TB drives mirrored using the Windows mirroring function. My system has been backing up to this drive regularly. The problem is I accidently broke the mirror when testing to see if this drive system might have been causing my boot issue. Connecting it to another machine showed two dynamic drives that were invalid. In the end I reformatted one as an NTFS basic disc and used recovery software on the other to copy all of the files to the reformatted drive. I had to copy the restore points into the new drive's System Volume Information folder by granting rights to that user. I moved the drive back to the original machine and rebooted. I can see my new drive, it even uses the same drive letter as it did in normal mode. Running System Restore it lists a new Automatic Restore point created while sitting at the RC along with all of my backups. Selecting the backup I want (or any other) I get a dialog. The backup drive could not be found. System Restore is looking for restore points on your backup. Make sure the backup drive is on and connected to this computer and then click OK. What do I need to do to allow system restore to see the restore points?

    Read the article

  • How to format my external HDD back to as "removable storage"?

    - by user990106
    Recently I formated my Seagate FreeAgent GoFlex external HDD in Mac OS X using GUID partition table since I wanted to install another Mac OS X onto that external HDD. However I changed my mind after my external HDD being formatted. Now I want to format my external HDD back to NTFS so that I can use it with my Windows 7. However, after I connected my external HDD via USB it didn't show up in my "computer" so I used "Disk Management" to check what's wrong with it. In the "Disk Management" I saw that there was one partition of my external HDD called "EFI partition" and I found that I could not delete this partition in the "Disk Management". So I tried to use "diskpart" in cmd and select the external HDD and commanded "clean". Then the EFI partition was gone and I created new volumn on that external HDD. However, after the volumn being created my external HDD did show up in my "computer" but it is in the "Hard Disk Drive" not in the "Devices with Removable Storage" as it used to be. I'm wondering if I can do anything to it to make it recognized as a "Devices with Removable Storage"?

    Read the article

  • BYOD (accessing files) on a domain without joining?

    - by Philip White
    I run a Samba 4 instance at a small private school. This makes a regular Linux server appear as a directory controller. There are two relevant benefits to this: I have a Samba share for people's documents, and I use the Redirected Folders feature to allow any employee to sit down at any PC, log in with their domain credentials, and their My Documents points to network storage. Everyone has a mapped drive (using Group Policy Preferences) to a share specific to their account type. Students can access one share (one share for all students), teachers have another, and office staff have another. However, I would like to allow BYOD (Bring Your Own Device). Some employees are already asking for it with their personal laptops, and I know eventually most everyone will want to. Is there any way to replicate the two features above without having to join PCs to the domain? Joining personal PCs is impractical if only because only professional editions of Windows support this. Ideally, any operating system (including mobile) could access the relevant shares, but of course Windows is key. Offline caching is optional. (I could set up OpenVPN for teachers who want to access their files from home.) The problem with simply giving SSH access to the relevant shares is primarily that Samba 4 relies on ext4 ACLs and ext4 extended attributes to maintain NTFS permissions. Writing files directly to the Linux server would bypass this and would (probably) not be interoperable with Samba4. Right now I am completely flexible. I am even fine with scrapping the whole domain and using some other software for the two features above. How can I allow school employees and students freedom to securely share files without requiring everyone to have specific editions of Windows?

    Read the article

  • SQL SERVER – Guest Post – Jacob Sebastian – Filestream – Wait Types – Wait Queues – Day 22 of 28

    - by pinaldave
    Jacob Sebastian is a SQL Server MVP, Author, Speaker and Trainer. Jacob is one of the top rated expert community. Jacob wrote the book The Art of XSD – SQL Server XML Schema Collections and wrote the XML Chapter in SQL Server 2008 Bible. See his Blog | Profile. He is currently researching on the subject of Filestream and have submitted this interesting article on the very subject. What is FILESTREAM? FILESTREAM is a new feature introduced in SQL Server 2008 which provides an efficient storage and management option for BLOB data. Many applications that deal with BLOB data today stores them in the file system and stores the path to the file in the relational tables. Storing BLOB data in the file system is more efficient that storing them in the database. However, this brings up a few disadvantages as well. When the BLOB data is stored in the file system, it is hard to ensure transactional consistency between the file system data and relational data. Some applications store the BLOB data within the database to overcome the limitations mentioned earlier. This approach ensures transactional consistency between the relational data and BLOB data, but is very bad in terms of performance. FILESTREAM combines the benefits of both approaches mentioned above without the disadvantages we examined. FILESTREAM stores the BLOB data in the file system (thus takes advantage of the IO Streaming capabilities of NTFS) and ensures transactional consistency between the BLOB data in the file system and the relational data in the database. For more information on the FILESTREAM feature, visit: http://beyondrelational.com/filestream/default.aspx FILESTREAM Wait Types Since this series is on the different SQL Server wait types, let us take a look at the various wait types that are related to the FILESTREAM feature. FS_FC_RWLOCK This wait type is generated by FILESTREAM Garbage Collector. This occurs when Garbage collection is disabled prior to a backup/restore operation or when a garbage collection cycle is being executed. FS_GARBAGE_COLLECTOR_SHUTDOWN This wait type occurs when during the cleanup process of a garbage collection cycle. It indicates that that garbage collector is waiting for the cleanup tasks to be completed. FS_HEADER_RWLOCK This wait type indicates that the process is waiting for obtaining access to the FILESTREAM header file for read or write operation. The FILESTREAM header is a disk file located in the FILESTREAM data container and is named “filestream.hdr”. FS_LOGTRUNC_RWLOCK This wait type indicates that the process is trying to perform a FILESTREAM log truncation related operation. It can be either a log truncate operation or to disable log truncation prior to a backup or restore operation. FSA_FORCE_OWN_XACT This wait type occurs when a FILESTREAM file I/O operation needs to bind to the associated transaction, but the transaction is currently owned by another session. FSAGENT This wait type occurs when a FILESTREAM file I/O operation is waiting for a FILESTREAM agent resource that is being used by another file I/O operation. FSTR_CONFIG_MUTEX This wait type occurs when there is a wait for another FILESTREAM feature reconfiguration to be completed. FSTR_CONFIG_RWLOCK This wait type occurs when there is a wait to serialize access to the FILESTREAM configuration parameters. Waits and Performance System waits has got a direct relationship with the overall performance. In most cases, when waits increase the performance degrades. SQL Server documentation does not say much about how we can reduce these waits. However, following the FILESTREAM best practices will help you to improve the overall performance and reduce the wait types to a good extend. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology Tagged: Filestream

    Read the article

  • Clustering for Mere Mortals (Pt2)

    - by Geoff N. Hiten
    Planning. I could stop there and let that be the entirety post #2 in this series.  Planning is the single most important element in building a cluster and the Laptop Demo Cluster is no exception.  One of the more awkward parts of actually creating a cluster is coordinating information between Windows Clustering and SQL Clustering.  The dialog boxes show up hours apart, but still have to have matching and consistent information. Excel seems to be a good tool for tracking these settings.  My workbook has four pages: Systems, Storage, Network, and Service Accounts.  The systems page looks like this:   Name Role Software Location East Physical Cluster Node 1 Windows Server 2008 R2 Enterprise Laptop VM West Physical Cluster Node 2 Windows Server 2008 R2 Enterprise Laptop VM North Physical Cluster Node 3 (Future Reserved) Windows Server 2008 R2 Enterprise Laptop VM MicroCluster Cluster Management Interface N/A Laptop VM SQL01 High-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL02 High-Performance Standard-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL03 Standard-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM Note that everything that has a computer name is listed here, whether physical or virtual. Storage looks like this: Storage Name Instance Purpose Volume Path Size (GB) LUN ID Speed Quorum MicroCluster Cluster Quorum Quorum Q: 2     SQL01Anchor SQL01 Instance Anchor SQL01Anchor L: 2     SQL02Anchor SQL02 Instance Anchor SQL02Anchor M: 2     SQL01Data1 SQL01 SQL Data SQL01Data1 L:\MountPoints\SQL01Data1 2     SQL02Data1 SQL02 SQL Data SQL02Data1 M:\MountPoints\SQL02Data1       Starting at the left is the name used in the storage array.  It is important to rename resources at each level, whether it is Storage, LUN, Volume, or disk folder.  Otherwise, troubleshooting things gets complex and difficult.  You want to be able to glance at a resource at any level and see where it comes from and what it is connected to. Networking is the same way:   System Network VLAN  IP Subnet Mask Gateway DNS1 DNS2 East Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 East Heartbeat Cluster2   255.255.255.0       West Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 West Heartbeat Cluster2   255.255.255.0       North Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 North Heartbeat Cluster2   255.255.255.0       SQL01 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0       SQL02 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0       One hallmark of a poorly planned and implemented cluster is a bunch of "Local Network Connection #n" entries in the network settings page.  That lets me know that somebody didn't care about the long-term supportabaility of the cluster.  This can be critically important with Hyper-V Clusters and their high NIC counts.  Final page:   Instance Service Name Account Password Domain OU SQL01 SQL Server SVCSQL01 Baseline22 MicroAD Service Accounts SQL01 SQL Agent SVCSQL01 Baseline22 MicroAD Service Accounts SQL02 SQL Server SVC_SQL02 Baseline22 MicroAD Service Accounts SQL02 SQL Agent SVC_SQL02 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Server SVC_SQL03 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Agent SVC_SQL03 Baseline22 MicroAD Service Accounts             Installation Account           administrator            Yes.  I write down the account information.  I secure the file via NTFS, but I don't want to fumble around looking for passwords when it comes time to rebuild a node. Always fill out the workbook COMPLETELY before installing anything.  The whole point is to have everything you need at your fingertips before you begin.  The install experience is so much better and more productive with this information in place.

    Read the article

  • Clone a Hard Drive Using an Ubuntu Live CD

    - by Trevor Bekolay
    Whether you’re setting up multiple computers or doing a full backup, cloning hard drives is a common maintenance task. Don’t bother burning a new boot CD or paying for new software – you can do it easily with your Ubuntu Live CD. Not only can you do this with your Ubuntu Live CD, you can do it right out of the box – no additional software needed! The program we’ll use is called dd, and it’s included with pretty much all Linux distributions. dd is a utility used to do low-level copying – rather than working with files, it works directly on the raw data on a storage device. Note: dd gets a bad rap, because like many other Linux utilities, if misused it can be very destructive. If you’re not sure what you’re doing, you can easily wipe out an entire hard drive, in an unrecoverable way. Of course, the flip side of that is that dd is extremely powerful, and can do very complex tasks with little user effort. If you’re careful, and follow these instructions closely, you can clone your hard drive with one command. We’re going to take a small hard drive that we’ve been using and copy it to a new hard drive, which hasn’t been formatted yet. To make sure that we’re working with the right drives, we’ll open up a terminal (Applications > Accessories > Terminal) and enter in the following command sudo fdisk –l We have two small drives, /dev/sda, which has two partitions, and /dev/sdc, which is completely unformatted. We want to copy the data from /dev/sda to /dev/sdc. Note: while you can copy a smaller drive to a larger one, you can’t copy a larger drive to a smaller one with the method described below. Now the fun part: using dd. The invocation we’ll use is: sudo dd if=/dev/sda of=/dev/sdc In this case, we’re telling dd that the input file (“if”) is /dev/sda, and the output file (“of”) is /dev/sdc. If your drives are quite large, this can take some time, but in our case it took just less than a minute. If we do sudo fdisk –l again, we can see that, despite not formatting /dev/sdc at all, it now has the same partitions as /dev/sda.  Additionally, if we mount all of the partitions, we can see that all of the data on /dev/sdc is now the same as on /dev/sda. Note: you may have to restart your computer to be able to mount the newly cloned drive. And that’s it…If you exercise caution and make sure that you’re using the right drives as the input file and output file, dd isn’t anything to be scared of. Unlike other utilities, dd copies absolutely everything from one drive to another – that means that you can even recover files deleted from the original drive in the clone! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDHow to Browse Without a Trace with an Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

    Read the article

  • How do I fix a corrupted harddrive after failed upgrade?

    - by Nil
    The problem originated when I was trying to fix this problem. Things went horribly, horribly wrong and I ended up with a new problem altogether. The last thing I did was run sudo apt-get install and that caused my system to freeze. I restarted my computer and it would not boot from the harddrive. I ran a copy of Ubuntu 12.10 from a flashdrive that I had and ran gparted to see if my partitions were all there. It returned this message: Invalid partition table on /dev/sda -- wrong signature 5208. The drive appeared as a 2TiB unallocated drive with an error. The drive had 4 partitions before (plus random unallocated space). There was a fat32 partition, an ext4 partition which contained ubuntu 13.04/13.10 (I don't even know which one at this point), an extended partition which contained a swap partition for my ubuntu partition (I was meaning to move that ubuntu partition into the extended partition, never got around to it), and another partition (I don't remember how I formatted it). I should also mention this is a 1TB harddrive. So in short, I have a corrupted partition table on my primary harddrive from which I boot from, how can I fix this? I tried mounting the drive with sudo mount /dev/sda1 /media/ubuntu then I changed my directory to said folder and tried to list files and this monstrosity happened: $ ls ls: cannot access ??w?j^?.: Input/output error ls: cannot access ??(? ?x?.|: Input/output error ls: cannot access 6W_@?)?._??: Input/output error ls: cannot access HB0v???.A}?: Input/output error ls: cannot access ???.?X: Input/output error ls: cannot access t)?.+?l: Input/output error ls: cannot access ?h@ ?.@ : Input/output error ls: cannot access >? @??.???: Input/output error ls: cannot access m???.??: Input/output error ls: cannot access @ if??a?: Input/output error ls: cannot access ?M!vN$?.??n: Input/output error ls: cannot access ?o? ??.Bm`: Input/output error ls: cannot access ?:I??? M. : Input/output error ls: cannot access W??.??: Input/output error ls: cannot access ?: Input/output error ls: cannot access ?W?s??: Input/output error ls: cannot access ?v?k?.???: Input/output error ls: cannot access 5?$<N??: Input/output error .x????.??i: Input/output error ls: cannot access je????.j?1: Input/output error XjD?.???: Input/output error ls: cannot access W??n???.?: Input/output error ls: cannot access ?^x.$"?: Input/output error ls: cannot access !??*!??j.??: Input/output error ls: cannot access '-??k?^?.???: Input/output error ls: cannot access b?w?w?b.\??: Input/output error ls: cannot access o????"z.??B: Input/output error ls: cannot access ??b?h.?3-: Input/output error ls: cannot access ??.$7: Input/output error ls: cannot access )??K.bk: Input/output error ls: cannot access s??z?.?(?: Input/output error ls: cannot access ?F@?0?.@?: Input/output error .?D: Input/output error .??: Input/output error ls: cannot access?????. @: Input/output error ls: cannot access ?/?? ?.??: No such file or directory ls: cannot access rk?p4q(?.?k: Input/output error This looks promising. This is the output of fdisk -l $ sudo fdisk -l /dev/sda Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: invalid flag 0x5208 of partition table 5 will be corrected by w(rite) Disk /dev/sda: 2199.0 GB, 2199023132672 bytes 255 heads, 63 sectors/track, 267349 cylinders, total 4294967056 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x44fdfe06 Device Boot Start End Blocks Id System /dev/sda1 113305600 894715903 390705152 c W95 FAT32 (LBA) /dev/sda2 894715904 1489307647 297295872 83 Linux /dev/sda3 1489309694 1497307135 3998721 5 Extended /dev/sda4 1497309184 1953523711 228107264 7 HPFS/NTFS/exFAT /dev/sda5 ? 3013257822 3688738171 337740175 aa Unknown

    Read the article

  • Database Mirroring on SQL Server Express Edition

    - by Most Valuable Yak (Rob Volk)
    Like most SQL Server users I'm rather frustrated by Microsoft's insistence on making the really cool features only available in Enterprise Edition.  And it really doesn't help that they changed the licensing for SQL 2012 to be core-based, so now it's like 4 times as expensive!  It almost makes you want to go with Oracle.  That, and a desire to have Larry Ellison do things to your orifices. And since they've introduced Availability Groups, and marked database mirroring as deprecated, you'd think they'd make make mirroring available in all editions.  Alas…they don't…officially anyway.  Thanks to my constant poking around in places I'm not "supposed" to, I've discovered the low-level code that implements database mirroring, and found that it's available in all editions! It turns out that the query processor in all SQL Server editions prepends a simple check before every edition-specific DDL statement: IF CAST(SERVERPROPERTY('Edition') as nvarchar(max)) NOT LIKE '%e%e%e% Edition%' print 'Lame' else print 'Cool' If that statement returns true, it fails. (the print statements are just placeholders)  Go ahead and test it on Standard, Workgroup, and Express editions compared to an Enterprise or Developer edition instance (which support everything). Once again thanks to Argenis Fernandez (b | t) and his awesome sessions on using Sysinternals, I was able to watch the exact process SQL Server performs when setting up a mirror.  Surprisingly, it's not actually implemented in SQL Server!  Some of it is, but that's something of a smokescreen, the real meat of it is simple filesystem primitives. The NTFS filesystem supports links, both hard links and symbolic, so that you can create two entries for the same file in different directories and/or different names.  You can create them using the MKLINK command in a command prompt: mklink /D D:\SkyDrive\Data D:\Data mklink /D D:\SkyDrive\Log D:\Log This creates a symbolic link from my data and log folders to my Skydrive folder.  Any file saved in either location will instantly appear in the other.  And since my Skydrive will be automatically synchronized with the cloud, any changes I make will be copied instantly (depending on my internet bandwidth of course). So what does this have to do with database mirroring?  Well, it seems that the mirroring endpoint that you have to create between mirror and principal servers is really nothing more than a Skydrive link.  Although it doesn't actually use Skydrive, it performs the same function.  So in effect, the following statement: ALTER DATABASE Mir SET PARTNER='TCP://MyOtherServer.domain.com:5022' Is turned into: mklink /D "D:\Data" "\\MyOtherServer.domain.com\5022$" The 5022$ "port" is actually a hidden system directory on the principal and mirror servers. I haven't quite figured out how the log files are included in this, or why you have to SET PARTNER on both principal and mirror servers, except maybe that mklink has to do something special when linking across servers.  I couldn't get the above statement to work correctly, but found that doing mklink to a local Skydrive folder gave me similar functionality. To wrap this up, all you have to do is the following: Install Skydrive on both SQL Servers (principal and mirror) and set the local Skydrive folder (D:\SkyDrive in these examples) On the principal server, run mklink /D on the data and log folders to point to SkyDrive: mklink /D D:\SkyDrive\Data D:\Data On the mirror server, run the complementary linking: mklink /D D:\Data D:\SkyDrive\Data Create your database and make sure the files map to the principal data and log folders (D:\Data and D:\Log) Viola! Your databases are kept in sync on multiple servers! One wrinkle you will encounter is that the mirror server will show the data and log files, but you won't be able to attach them to the mirror SQL instance while they are attached to the principal. I think this is a bug in the Skydrive, but as it turns out that's fine: you can't access a mirror while it's hosted on the principal either.  So you don't quite get automatic failover, but you can attach the files to the mirror if the principal goes offline.  It's also not exactly synchronous, but it's better than nothing, and easier than either replication or log shipping with a lot less latency. I will end this with the obvious "not supported by Microsoft" and "Don't do this in production without an updated resume" spiel that you should by now assume with every one of my blog posts, especially considering the date.

    Read the article

  • PC to USB transfer slow

    - by Vipin Ms
    I'm having trouble with USB transfer,not with external hard disk. Transfer starts with like, for the transfer of 700MB file it starts with 30mb/s and towards the end it stops at 0s and stays put for like 3-4 mins to transfer the last bit. I have tried different USB devices, but no luck. Is it a bug? Another important point is, in Kubuntu there is no such issue. So is it something related to Gnome? I'm using Ubuntu 11.10 64bit. Somebody please help, it's really annoying. Here are the details. PC all of my drives are in ext4. USB I tried ext3,ntfs and fat32. All having the same problem. Here are my USB controllers details: root@LAB:~# lspci|grep USB 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) Here is an example of one transfer. I connected one of my 4GB usb device. Nov 24 12:01:25 LAB kernel: [ 1175.082175] userif-2: sent link up event. Nov 24 12:01:25 LAB kernel: [ 1695.684158] usb 2-2: new high speed USB device number 3 using ehci_hcd Nov 24 12:01:25 LAB mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" Nov 24 12:01:26 LAB mtp-probe: bus: 2, device: 3 was not an MTP device Nov 24 12:01:26 LAB kernel: [ 1696.132680] usbcore: registered new interface driver uas Nov 24 12:01:26 LAB kernel: [ 1696.142528] Initializing USB Mass Storage driver... Nov 24 12:01:26 LAB kernel: [ 1696.142919] scsi4 : usb-storage 2-2:1.0 Nov 24 12:01:26 LAB kernel: [ 1696.143146] usbcore: registered new interface driver usb-storage Nov 24 12:01:26 LAB kernel: [ 1696.143150] USB Mass Storage support registered. Nov 24 12:01:27 LAB kernel: [ 1697.141657] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS Nov 24 12:01:27 LAB kernel: [ 1697.168827] sd 4:0:0:0: Attached scsi generic sg2 type 0 Nov 24 12:01:27 LAB kernel: [ 1697.169262] sd 4:0:0:0: [sdb] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB) Nov 24 12:01:27 LAB kernel: [ 1697.169762] sd 4:0:0:0: [sdb] Write Protect is off Nov 24 12:01:27 LAB kernel: [ 1697.169767] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 Nov 24 12:01:27 LAB kernel: [ 1697.171386] sd 4:0:0:0: [sdb] No Caching mode page present Nov 24 12:01:27 LAB kernel: [ 1697.171391] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 24 12:01:27 LAB kernel: [ 1697.173503] sd 4:0:0:0: [sdb] No Caching mode page present Nov 24 12:01:27 LAB kernel: [ 1697.173510] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 24 12:01:27 LAB kernel: [ 1697.175337] sdb: sdb1 After that I initiated one transfer. lsof -p 3575|tail -2 mv 3575 root 3r REG 8,8 1719599104 4325379 /media/Misc/The Tree of Life (2011) DVDRip XviD-MAXSPEED/The Tree of Life (2011) DVDRip XviD-MAXSPEED www.torentz.3xforum.ro.avi mv 3575 root 4w REG 8,17 1046347776 15 /media/SREE/The Tree of Life (2011) DVDRip XviD-MAXSPEED/The Tree of Life (2011) DVDRip XviD-MAXSPEED www.torentz.3xforum.ro.avi Here are the total time spent on that transfer. root@LAB:/media/SREE# time mv /media/Misc/The\ Tree\ of\ Life\ \(2011\)\ DVDRip\ XviD-MAXSPEED/ /media/SREE/ real 11m49.334s user 0m0.008s sys 0m5.260s root@LAB:/media/SREE# df -T|tail -2 /dev/sdb1 vfat 3918344 1679308 2239036 43% /media/SREE /dev/sda8 ext4 110110576 60096904 50013672 55% /media/Misc Do you think this is normal?? Approximately 12 minutes for 1.6Gb transfer? Thanks.

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56  | Next Page >