private network - Page 53

Network really slow with TL-WN951N wireless card

- by Sam

I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

Read the article

Sitemap structure for network of subdomains

- by HaCos

I am working on a project that's a network of 2 domains (domain.gr & domain.com.cy) of subdomains similar to Hubpages [each user gets a profile under a different subdomain & there is a personal blog for that user as well] and I think there is something wrong with our sitemap submission. Sometimes it takes weeks in order a new profiles to get indexed. We make use of one Webmasters account in order to manage all network and we don't want to create different accounts for each subdomain since there are more than 1000 already. According to this post http://goo.gl/KjMCjN, I end up on a structure of 5 sitemaps with the following structure : 1st sitemap will be for indexing the others. 2nd sitemap for all users profile under the domain.gr 3nd sitemap for all users profile under the domain.com.cy 4th sitemap for all posts under the *.domain.gr - news sitemap http://goo.gl/8A8S9f 5th sitemap for all posts under the *.domain.com.cy - news sitemap again Now my questions: Should we create news sitemaps or just list all post in 2nd & 3rd sitemap? Does links ordering has anything to do? Eg: Most recent user created be first in sitemap or doesn't make any different and we just need to make sure that lastmod date is correct? Does anyone guess how Hubpages submit their sitemap in Webmasters so maybe we could follow there way? Any alternative or better way to index this kind of schema? PS: Our network is multi language - Greek & English are available. We make use of hreflang tags on the head of each page to separate country target of each version.

Read the article

Exempt programs from using active VPN connection

- by Oxwivi

When I connect to a VPN, all my network traffic is automatically routed through it. Is there a way to add exemptions to that? I don't know if adding exceptions has anything to do with the VPN protocol, but the VPN I'm using is of the OpenVPN protocol. Speaking of OpenVPN, why is it not installed by default on Ubuntu installs unlike PPTP? I could not get the list of IRCHighWay's servers, and this is the result I get trying to connect on XChat with running the bash script running: * Looking up irc.irchighway.net * Connecting to irc.irchighway.net (65.23.153.98) port 6667... * Connected. Now logging in... * You have been K-Lined. * *** You are not welcome on this network. * *** K-Lined for Open proxies are not allowed. (2011/02/26 01.21) * *** Your IP is 173.0.14.9 * *** For assistance, please email [email protected] and include everything shown here. * Closing Link: 0.0.0.0 (Open proxies are not allowed. (2011/02/26 01.21)) * Disconnected (Remote host closed socket). The IP 173.0.14.9 is the one due to my VPN. I had forgotten to check ip route list before running the script, and this is the one after running it: ~$ ip route list 99.192.193.241 dev ppp0 proto kernel scope link src 173.0.14.9 173.0.14.2 via 192.168.1.1 dev eth1 proto static 173.0.14.2 via 192.168.1.1 dev eth1 src 192.168.1.3 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.3 metric 2 169.254.0.0/16 dev eth1 scope link metric 1000 default dev ppp0 proto static Oh and running the script returned this output: ~$ sudo bash irc_route.sh Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M] [netmask N] [mss Mss] [window W] [irtt I] [mod] [dyn] [reinstate] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject inet_route [-FC] flush NOT supported I ran the script after connecting to the VPN.

Read the article

Add static ARP entries when network is brought up

- by jozzas

I have some pretty dumb IP devices on a subnet with my Ubuntu server, and the server receives streaming data from each device. I have run into a problem in that when an ARP request is issued to the device while it is streaming data to the server, the request is ignored, the cache entry times out and the server stops receiving the stream. So, to prevent the server from sending ARP requests to these devices altogether, I would like to add a static ARP entry for each, something like arp -i eth2 -s ip.of.the.device mac:of:the:device But these "static" ARP entries are lost if networking is disabled / enabled or if the server is rebooted. Where is the best place to automatically add these entries, preferably somewhere that will re-add them every time the interface eth2 is brought up? I really don't want to have to write a script that monitors the output of arp and re-adds the cache entries if they're missing. Edit to add what my final script was: Created the file /etc/network/if-up.d/add-my-static-arp With the contents: #!/bin/sh arp -i eth0 -s 192.168.0.4 00:50:cc:44:55:55 arp -i eth0 -s 192.168.0.5 00:50:cc:44:55:56 arp -i eth0 -s 192.168.0.6 00:50:cc:44:55:57 And then obviously add the permission to allow it to be executed: chmod +x /etc/network/if-up.d/add-my-static-arp And these arp entries will be manually added or re-added every time any network interface is brought up.

Read the article

Remote connection to dynamic public ip & private ip addresses

- by user53864

Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

Read the article

The latest Oracle Social Network News from Open World

- by me

Highlights Oracle and Partners showcase the latest development around Oracle Social Network (OSN) Integration of OSN Social Fabric into Business Applications like Finance, HCM and Customer Experience Partners like Cisco WebEx, Avaya, Weemo, Lingotek and HarQen showcase OSN integration Oracle shares details around internal OSN deployment Please visit us at 2413 Moscone South Exhibition Hall and experience a live OSN demo Social Fabric Oracle Social Network socializes your Applications, Process and Content within your Enterprise. Here are some examples what is shown at Oracle Open World. Socialize the Finance department Enable Finance departments to collaborate instantly during quarter close with real-time information access Enable finance professionals in the back office to easily interact with the rest of the company Provide privacy when discussing sensitive financial results within Conversations Socialize Human Capital Management (HCM) Promotes attainable performance goals that achieve the business objectives of the enterprise Capture expertise across the network Continuous feedback loop provided that results in productivity and innovation improvement tied to higher employee engagement OSN and Customer Experience Find the person with the best skills to assist with the issue Real-time collaboration in context of the issue Track an Agent’s collaboration contributions Identify and contribute relevant knowledge back to the system Cisco/Webex integration The Web Conferencing tool of your choice can be integrated with OSN. In the example below you can see the integration of the Cisco WebEx solution into OSN. and sure - this works on mobile devices as well OSN @ Oracle Oracle has deployed OSN as part of the internal Fusion CRM application rollout. After just 4 month we can see impressive usage patterns.

Read the article

Problems with wired ethernet connection Ubuntu 11.10

- by Andrew Fielden

After some partition shuffling, I've got a problem on my 11.10 system. The wired ethernet interface fails to come up, although the wireless interface is working. I'm using NetworkManager. I thought this may be a problem with NetworkManager, so I checked the config files, which look ok. I then tried re-installing the package, but this didn't resolve the issues. I'm not sure at this point if the problem is due to software configuration, or a hardware problem. I've also tried the cable in other router ports, but same problem. The symptoms are:- System settings - Network reports that the cable is unplugged (it isn't) ifconfig reports the following eth0 Link encap:Ethernet HWaddr f0:4d:a2:a2:a7:fe UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:792 (792.0 B) TX bytes:0 (0.0 B) Interrupt:46 Base address:0xe000 My /etc/network/interfaces file has the following: auto lo iface lo inet loopback My /etc/resolv.conf file has the following: # Generated by NetworkManager The router's red light is on for this port dmesg reports ADDRCONF(NETDEV_UP): eth0: link is not ready

Read the article

set tap0 using virt-manager for bridged wireless

- by DaveO

After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

Read the article

Wifi - wireless network not working after installing Ubuntu 12.04

- by Nilesh

I had installed ubuntu 12.04 in my Dell Vostro 3460. Initially wired as well wireless both are not working. After installing compat-wireless-2012-07-03-pc.tar.bz2 wired network fine but wireless is not working. Previously both were working fine with ubuntu 11.10. Also presently both network are working fine in Win7. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) iwconfig: lo no wireless extensions. eth0 no wireless extensions. ifconfig: eth0 Link encap:Ethernet HWaddr 84:8f:69:d4:35:9b inet addr:10.24.22.72 Bcast:10.24.31.255 Mask:255.255.224.0 inet6 addr: fe80::868f:69ff:fed4:359b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15332 errors:0 dropped:0 overruns:0 frame:0 TX packets:10425 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:9262594 (9.2 MB) TX bytes:1572030 (1.5 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1432 errors:0 dropped:0 overruns:0 frame:0 TX packets:1432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145656 (145.6 KB) TX bytes:145656 (145.6 KB)

Read the article

Intermittent ethernet connectivity

- by Amey Jah

I am facing a weird problem. I am connecting to my dsl modem via ethernet. After booting, sometimes Ubuntu 10.10 does not detect the eth0 card properly or does not connect to the modem. I have made the following observations: My modem is fully on. All indicators are on except ethernet, which is blinking continuously. My network indicator applet informs me that I am connected to modem, but I am not able to browse as it has not established connection with modem. I need to power off and on (restart) the modem several times OR disconnect/connect (via network applet) several times, before the system can establish a connection with the modem. Once it establishes the connection, the ethernet LED (on modem) stops blinking and glows continuously. However, I do not see this problem every time I reboot or start my computer. 3/5 time, it connects to the modem in a single attempt. Friends, I am not able to understand root cause of this problem. Plus I do not know what kind of logs should be attached. If you want any logs please give me command to run, and I will paste the result for you. Note: I ran system testing when above problem happened. Follow this link to download result.

Read the article

Finding a private (NAT) host's IP using historic destination data

- by l0c0b0x

The issue: An unknown private (NAT) client is infected with malware and it's trying to access a Bot server at random times/dates. How we know about this: We receive bot traffic notices/alerts from REN-ISAC. Unfortunately, we don't receive those until the next day after it has happened. What they provide to us is: The source address (of the firewall) The destination addresses (it varies, but they're going to network subnet allocated to a German ISP) The source port (which varies--dynamic ports). Question: What would be the best approach to finding this internal host (historically) with a Cisco ASA as firewall? I'm guessing blocking anything to the destination address(es), and logging that type of traffic/access might allow me to find the source host, but I'm not sure which tool/command would be the most useful. I've seen Netflow thrown into a few responses when it comes to logging, but I'm confused with it's association of Logging, NAL, and nBAR, and how they relate to Netflow.

Read the article

my application did not show toast mesage when network is not available [closed]

- by Smart Guy

my application did no show toast message when network is disable if (position == 2) { final ConnectivityManager connMgr = (ConnectivityManager) getSystemService(Context.CONNECTIVITY_SERVICE); NetworkInfo activeNetworkInfo = connMgr .getActiveNetworkInfo(); android.net.NetworkInfo mobile1 = connMgr.getNetworkInfo(ConnectivityManager.TYPE_MOBILE); if (activeNetworkInfo == null) { Toast.makeText(LoginScreen.this, "No Active Network",Toast.LENGTH_LONG).show(); } else { if (activeNetworkInfo.isConnected()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { String pinemptycheck = pin.getText().toString(); String mobileemptycheck = mobile.getText().toString(); if (pinemptycheck.trim().equals("")||(mobileemptycheck.trim().equals(""))) { Toast.makeText(getApplicationContext(), "Please Enter Correct Information", Toast.LENGTH_LONG).show(); } else { showProgress(); postLoginData(); } } }); } else if (activeNetworkInfo.isConnectedOrConnecting()) { Toast.makeText(LoginScreen.this, "network is Connecting", Toast.LENGTH_LONG) .show(); else if (mobile1.isAvailable()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { showProgress(); postLoginData(); } }); } else if (!mobile1.isAvailable()) { Toast.makeText(LoginScreen.this,"No other Connection Found ",Toast.LENGTH_LONG).show(); btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View v) { Toast.makeText(LoginScreen.this," No other Connection Found", Toast.LENGTH_LONG).show(); } }); }}}

Read the article

Network: Incoming connections work, outgoing fails

- by anirvan

i recently set up my own server at home to run Ubuntu 12.04 server ed. on booting up, i noticed that a message related to networking comes up, and the booting process pauses. the message read something like - waiting for network configuration and after a while - waiting another 60 seconds... on booting up, I realised that any command which requires a network connection was not working - ping, apt-get install, etc. on firing the ifup eth0 command, I get the error RTNETLINK answers: File exists. Failed to bring up eth0. I also realised, while searching the web for this problem, that this is probably one of the most common networking related issues - however, most of the questions are around setting up multiple IPs for the same machine. ifdown eth0 also fails, stating that eth0 is not configured. my /etc/network/interfaces file has a simple configuration for a static IP: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask xx.xx.xx.xx broadcast xx.xx.xx.xx gateway xx.xx.xx.xx dns-nameservers xx.xx.xx.xx The strangest part of this problem is that, while I can't connect to anything outside, I can ping to this particular server using the static IP configured in the interface file, and, i can even SSH into it! I'm really at ends here with this problem, and any guidance is much appreciated. Thanks!

Read the article

set tap0 using virt-manager for bridged wireless

- by DaveO

After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

Read the article

setting up a private network using linksys router

- by user287745

scenerio:- a database server running sql server 2005 and sql server management studio 2005 express editions a web server running IIS 5.0v using windows xp pro. two other computer having windows xp and windows 98 i have a linksys router which i use to access point for wireless (laptop) there are 5 sockets behind it four for clients and one for internet. i would like to setup a LAN- something like a private hosting area with two clients. would should i do? where to connect what and what would the changes in settnigs be. right now it uses dhcp or something to assign ips. where will the webserver be attached to the internet socket? where will the db server be attached? any guide, links, help thank you

Read the article

Multiple SSH private keys for the same host

- by Sencha

How can I store 2 different private SSH keys for the same host? I have tried 2 entries in /etc/ssh/ssh_config for the same host with the different keys, and I've also tried to put both keys in the same file and referencing it from one hosts setting, however both do not work. More detail: I'm running Ubuntu server (12.04) and I want to connect to GitHub via SSH to download the latest source for my projects. There are multiple projects running on the same server and each project has a GitHub repo with it's own unique deloyment key-pair. So the host is always the same (github.com) but the keys need to be different depending on which repo I'm using. Different /etc/ssh/ssh_config versions I have tried: Host github.com IdentityFile /etc/ssh/my_project_1_github_deploy_key StrictHostKeyChecking no Host github.com IdentityFile /etc/ssh/my_project_2_github_deploy_key StrictHostKeyChecking no and this with both keys in the same file: Host github.com IdentityFile /etc/ssh/my_project_github_deploy_keys StrictHostKeyChecking no I've had no luck with either. Any help would be greatly appreciated!

Read the article

How do I connect to a wireless network?

- by Keith Groben

I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

Read the article

Remote connection to dynamic public ip & private ip addresses

- by user51737

Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

Read the article

private subnet nat (openvpn / racoon)

- by Jonas Schnelli

I have a openvpn subnet 10.8.0.0/24 running one server and one client (laptop). openvpn works fine. Browsing the web over openvpn from the laptop works also fine. Now on the server there is a private subnet with 10.7.8.128/28. The subnet is set up with racoon (IPSEC s2s vpn). The s2s vpn allows me to access the subnet 10.3.5.0/24 at the other s2s vpn end. Works all fine when I'm connected with ssh to my server. From my laptop i can ping 10.7.8.129 (the servers ipsec local ip) but i cannot reach the net 10.3.5.0/24. I tried to add a static route on my laptop 10.3.5.0/24 over gw 10.7.8.129 with no success. Any ideas how i do setup the nat / routing? Thanks

Read the article

Lost connectivity after configuring multiple network adapters on separate networks

- by Dave Long

I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

Read the article

DSA private key format

- by ansur

So I used puttygen to generate a DSA private key and then exported that to the OpenSSH format and here's what I got when I ran OpenSSL's asn1parse on it: 0:d=0 hl=4 l= 443 cons: SEQUENCE 4:d=1 hl=2 l= 1 prim: INTEGER :00 7:d=1 hl=3 l= 129 prim: INTEGER :B9916796B7A3EFFD5CA36368186D0ED 193BE7FDD61CC6851174F3E9781A0C0CEA7473E528372F559A1DB2A7E049A9BEFAE2CAAC55527049 2A0CD55B59A48A53BCADD32181F519EA9E6A98EF8EF59DE314A2E69606C728F2F8DEE722B4C67BA6 8EB8A619B6006804F83740F9C74C38136522E7E83F22920AA39822FBDA0DF4D0B 139:d=1 hl=2 l= 21 prim: INTEGER :D832F5B01F075FEC0F162B91982F34D B26A0CC29 162:d=1 hl=3 l= 129 prim: INTEGER :9B73F47AEFF8E39584FD10ACF81CCD5 75C96FC5558A5C94B941EF76318D132007ACAE1EA22E95CE0B13FC7875CE4D4ED33BA639CD8C2AC9 C0A0530FB7786F584A62EBAE5985E1C26ED0D0B9FDD5E8DB0142BE182A4E5359307007060C327FEE C2F8D04EABB37D7B74076EB9BDB4885F627DE85708D5BDBF5177A05721E09A367 294:d=1 hl=3 l= 128 prim: INTEGER :6BD9267D2D1E4546EE05F6CD087F311 93C0EEB13B1E139F5072E900AB2EEF68EEC28BF4D7D6CAE4DEE59005F00BAE07343EE520C217FF6E 7880DC788E4555F78CCB5E89A10CDC71A663DA696C5BC34E296CEB3518D65A79BF00B6D592B1399A 9F0D79AE3F3FB445EE1F2B4B72515F036C8E1D5C7FAD336FD3503874645C5C264 425:d=1 hl=2 l= 20 prim: INTEGER :15295A12325E5F1A6F7243B7BB3BE74 6FE7B76E9 My question is... where is this format described? What does the first 0 integer value mean for example? I guess I could look in the puttygen source code but is there an RFC describing this format or something?

Read the article

We want to setup low cost private cloud [closed]

- by Virtual Jasper

We are a small company with very limit funds. In order to improve our server reliability, we are studying to migrate to CLOUD. We seen some CLOUD provider, they would charge by resources such as, CPU, RAM.....Disk space....High Availability....etc. We have server team, so we also consider to built the private CLOUD, we seen the Windows 8 server, it does need license fee. So we looking at Linux side, we look at Ubuntu and OpenStack. What is the different between Ubuntu and OpenStack solutions? Is it both free on software license? and only to pay the technical support.

Read the article

Network/browser issues after upgrade to 12.04

- by Reg

I let my laptop upgrade to 12.04. And have no network afterwards. I went through all the articles I could find in google. Right now, I can ping google, and yahoo, but not cnn.com for example or anything else. Firefox says it can't reach google.com or gmail.com (or anything, not even IP. /etc/network/interfaces dns-nameservers 8.8.8.8 <<<<<added auto lo iface lo inet loopback /etc/dhcp/dhclient.conf #prepend domain-name-servers 8.8.8.8,8.8.4.4; prepend domain-name-servers 127.0.0.1; <<<<< tried both /etc/NetworkManager/NetworkManager.conf with and without dns=dnsmasq commented out. I can ping my wireless router and connect to it just fine. Have tried proxy/noproxy. This looks like After Upgrade to 12.04 - cannot connect to network but no answer there. I would hate to do a fresh install. Any assistance appreciated.

Read the article

Network(ing) to the Limit

- by Oracle OpenWorld Blog Team

By Karen Shamban While Oracle OpenWorld attendees are networking, there's an Oracle Global IT team that builds and maintains the massive networks that help run the show. The objective? To keep things running as seamlessly and smoothly as possible, constantly evaluate priorities, mitigate risk, and be ready for whatever might happen -- because things do happen when there are 50,000 plus attendees, tens of thousands of devices, unexpected requirements, and a constant flow of up-to-the-minute information. Here's just some of what it takes to keep the conference going, network style: 100 Oracle network, voice, and desktop engineers; security, risk management, and other IT experts, who come in from 17 countries 1000+ network switches 300+ miles of copper and fiber 485 wireless access points 2,500 wired laptops 300 VoIP phones And just where are all these networks and devices deployed? This is what the team had to build and manage: Moscone North, South, and West, including: The keynote hall Oracle DEMOgrounds in the Exhibition Halls Hundreds of session rooms Connection Centers, Social Avenue, Lounges Registration The Howard Street Tent and Taylor Street Cafe tented venues Oracle Square (Union Square) Yerba Buena Gardens Masonic Auditorium Sessions and demos at 8 hotel venues That's a whole lot of networking going on. And here's the kicker: the team has only 4 days to bring get it all up and running across these many venues, and exactly 12 hours to take it all down once the show ends. The Global IT team puts in the equivalent of 152 24-hour days for set-up, 227 24-hour days of support during the conferences, and then tears it all down in about 20 24-hour days. And in case you were wondering, the planning for next year's Oracle OpenWorld starts ... next week. No rest for the weary. Now THAT's networking! So hats off to the Global IT team -- the job ain't easy, but somebody's got to do it, and they do it remarkably well.

Read the article

How to get ISA 2006 Web Proxy to work with the Single Network Adapter template

- by tronda

I need to test an issue with running our application behind a proxy server with different type of configurations, so I installed ISA 2006 Enterprise on a desktop computer. Since this computer only has a single network card and I want to start out easy, I chose the "Single Network Adapter" template. We have a internal NAT'ed network which is in the 10 range. I have defined the internal network on the ISA server to be 10.XXX.YY.1 - 10.XXX.YY.255 I also have the Default rule which denies all traffic, but I've added the following Rule: Policy - Protocols - From - To Accept HTTP Internal External HTTPS Local Host Internal HTTS Server Localhost Then I configured Internet Explorer on a virutal machine running XP within virtualbox with Brigded network (gets same network address range as regular computers on our network) similar to this Instead of the server name I used the IP address. When I try to access a web page, this doesn't go through and I get the following log messages on the proxy server: Original Client IP Client Agent Authenticated Client Service Referring Server Destination Host Name Transport HTTP Method MIME Type Object Source Source Proxy Destination Proxy Bidirectional Client Host Name Filter Information Network Interface Raw IP Header Raw Payload GMT Log Time Source Port Processing Time Bytes Sent Bytes Received Cache Information Error Information Authentication Server Log Time Client IP Destination IP Destination Port Protocol Action Rule Result Code HTTP Status Code Client Username Source Network Destination Network URL Server Name Log Record Type 10.XXX.YY.174 - TCP - - - 24.08.2010 13:25:24 1080 0 0 0 0x0 0x0 - 24.08.2010 06:25:24 10.XXX.YY.174 10.XXX.YY.175 80 HTTP Initiated Connection MyHTTPAccess 0x0 ERROR_SUCCESS Internal Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:24 2275 0 0 0 0x0 0x0 - 24.08.2010 06:25:24 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:25 2275 0 0 0 0x0 0x0 - 24.08.2010 06:25:25 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:25 2276 0 0 0 0x0 0x0 - 24.08.2010 06:25:25 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:26 2276 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:26 2277 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Initiated Connection 0x0 ERROR_SUCCESS Local Host Local Host - PROXYTEST Firewall 10.XXX.YY.159 - UDP - - - 24.08.2010 13:25:26 68 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.159 255.255.255.255 67 DHCP (request) Denied Connection [Enterprise] Default rule 0xc004000d FWX_E_POLICY_RULES_DENIED Internal Local Host - PROXYTEST Firewall 10.XXX.YY.166 - UDP - - - 24.08.2010 13:25:26 68 0 0 0 0x0 0x0 - 24.08.2010 06:25:26 10.XXX.YY.166 255.255.255.255 67 DHCP (request) Denied Connection [Enterprise] Default rule 0xc004000d FWX_E_POLICY_RULES_DENIED Internal Local Host - PROXYTEST Firewall 0.0.0.0 Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Yes Proxy 10.XXX.YY.175 TCP GET Internet - - - Req ID: 096c76ae; Compression: client=No, server=No, compress rate=0% decompress rate=0% - - - 24.08.2010 13:25:27 0 2945 2581 446 0x0 0x40 24.08.2010 06:25:27 10.XXX.YY.174 10.XXX.YY.175 80 http Failed Connection Attempt MyHTTPAccess 10061 anonymous Internal Local Host http://www.vg.no/ PROXYTEST Web Proxy Filter 10.XXX.YY.175 - TCP - - - 24.08.2010 13:25:27 2277 0 0 0 0x0 0x0 - 24.08.2010 06:25:27 10.XXX.YY.175 10.XXX.YY.175 80 HTTP Closed Connection 0x80074e20 FWX_E_GRACEFUL_SHUTDOWN Local Host Local Host - PROXYTEST Firewall

Search Results

Search found 31625 results on 1265 pages for 'private network'.

Page 53/1265 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60 | Next Page >

- by Sam

- by HaCos

- by Oxwivi

- by jozzas

- by user53864

- by me

- by Andrew Fielden

- by DaveO

- by Nilesh

- by Amey Jah

- by l0c0b0x

- by Smart Guy

- by anirvan

- by DaveO

- by user287745

- by Sencha

- by Keith Groben

- by user51737

- by Jonas Schnelli

- by Dave Long

- by ansur

- by Virtual Jasper

- by Reg

- by Oracle OpenWorld Blog Team

- by tronda

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60 | Next Page >