Search Results

Search found 1368 results on 55 pages for 'rob bryce'.

Page 53/55 | < Previous Page | 49 50 51 52 53 54 55  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Chester Devs Presentation and source code &ndash; &lsquo;Event Store - an introduction to a DSD for event sourcing and notifications&rsquo;

    - by Liam Westley
    Originally posted on: http://geekswithblogs.net/twickers/archive/2013/11/11/chester-devs-presentation-and-source-code-ndash-lsquoevent-store.aspxThank you everyone at Chester Devs Thanks to Fran Hoey and all the people from Chester Devs. It was a hard drive up and back but the enthusiasm of the audience, with some great questions does make it worthwhile. Presentation and source code My presentation, source code, Event Store runners and text files containing the various command line parameters used for curl is now available on GitHub; https://github.com/westleyl/ChesterDevs-EventStore. Don’t worry if you don’t have a GitHub account, you don’t need one, you can just click on the Download Zip button on the right hand menu to download all the files as a single ZIP file.  If all you want is the PowerPoint presentation, go to https://github.com/westleyl/ChesterDevs-EventStore/blob/master/Powerpoint/Huddle-EventStore.pptx, and click on the View Raw button. Downloading and installing Event Store and Tools Download Event Store http://download.geteventstore.com – I unzipped these files into C:\EventStore\v2.0.1 Download Curl from http://curl.haxx.se/download.html – I downloaded Win64 Generic (with SSL) and unzipped these files into C:\curl version 7.31.0 Running the tools I used in my presentation Demonstration 1 (running Event Store) You can use one of my Event Store runner command files to run the single node version of Event Store, using default ports of 2213 for HTTP and 1113  for TCP, and with a wildcard HTTP pattern.  Both take a single command line parameter to specify the location of the data and log files.  The runners assume the single node executable is located in C:\EventStore\v2.0.1, and will placed data files and logs beneath C:\EventStore\Data, i.e. RunEventStore.cmd TestData1 This will create data files in C:\EventStore\Data\TestData1\Data and log files in C:\EventStore\Data\TestData1\logs. If, when running Event Store you may see the following message, [03288,15,06:23:00.622] Failed to start http server Access is denied You will either need to run Event Store in an administrator console window, or you can use the netsh command to create a firewall permission to allow HTTP listening (this will need to be run, once, in an administrator console window), netsh http add urlacl url=http://*:2213/ user=liam You can always delete this later by running the delete; netsh http delete urlacl url=http://*:2213/ If you want to confirm that everything is running OK, open the management console in a browser by navigating to http://127.0.0.1:2213. If at any point you are asked for a user name and password use the default of ‘admin’/‘changeit’. Demonstration 2 (reading and adding data, curl) In my second demonstration I used curl directly from the console to read streams, write events and then read back those events. On GitHub I have included is a set of curl commands, CurlCommandLine.txt, and a sample data file, SampleData.json, to load an event into a DDDNorth3 stream. As there is not much data in the Event Store at this point I used the $stats-127.0.0.1:2113 which is a stream containing performance statistics for Event Store and is updated every 30 seconds (default). Demonstration 3 (projections) On GitHub I have included a sample projection, Projection-ByRoom.txt, which will create streams based on the room on which a session was held on the DDDNorth3 agenda. Browse to the management console, http://127.0.0.1:2213.  Click on Projections, New Projection, give it a name, Sessions-ByRoom, and copy in the JavaScript in the Projection-ByRoom.txt file.  Select Continuous, tick Emit Enabled and then click on Post. It should run immediately. You may by challenged for the administration login for the management console, if so use the default user name and password; 'admin'/'changeit'. Demonstration 4 (C# client) The final demonstration was the Visual Studio 2012 project using the Event Store client – referenced directly as C:\EventStore\v2.0.1\EventStore.ClientAPI.dll, although you can switch this to the latest Event Store client NuGet package. The source code provides a console app for viewing projections with the projection manager (HTTP connection), as well as containing a full set of data for the entire DDDNorth3 agenda.  It also deals with the strategy for reading newest events backwards to older events and ignoring older events that have been superseded. Resources Event Store home page: http://www.geteventstore.com/ Event Store source code on GitHub: https://github.com/eventstore/eventstore Event Store documentation on GitHub: https://github.com/eventstore/eventstore/wiki (includes index to @RobAshton’s blog series on Event Store at https://github.com/eventstore/eventstore/wiki#rob-ashton---projections-series) Event Store forum in Google Groups: https://groups.google.com/forum/?fromgroups#!forum/event-store TopShelf Windows service wrapper is available on github: https://gist.github.com/trbngr/5083266

    Read the article

  • DDD North 3 Presentation and source code &ndash; &lsquo;Event Store - an introduction to a DSD for event sourcing and notifications&rsquo;

    - by Liam Westley
    Originally posted on: http://geekswithblogs.net/twickers/archive/2013/10/15/ddd-north-3-presentation-and-source-code-ndash-lsquoevent-store.aspxThank you everyone at DDD North Thanks to all the people who helped organise the cracking conference that is DDD North 3, returning to Sunderland, and the great facilities at the University of Sunderland, and the fine drinks reception at Sunderland Software City.  The whole event wouldn’t be possible without the sponsors who ensured over 400 people were kept fed and watered so they could enjoy the impressive range of sessions. And lastly, a thank you to all those delegates who gave up their free time on a Saturday to spend a day dashing between lecture rooms, including a late change to my room which saw 40 people having to brave a journey between buildings in the fine drizzle. The enthusiasm from the delegates always helps recharge my geek batteries. Presentation and source code My presentation, source code, Event Store runners and text files containing the various command line parameters used for curl is now available on GitHub; https://github.com/westleyl/DDDNorth3-EventStore. Don’t worry if you don’t have a GitHub account, you don’t need one, you can just click on the Download Zip button on the right hand menu to download all the files as a single ZIP file.  If all you want is the PowerPoint presentation, go to https://github.com/westleyl/DDDNorth3-EventStore/blob/master/Powerpoint/DDDNorth-EventStore.pptx, and click on the View Raw button. Downloading and installing Event Store and Tools Download Event Store http://download.geteventstore.com – I unzipped these files into C:\EventStore\v2.0.1 Download Curl from http://curl.haxx.se/download.html – I downloaded Win64 Generic (with SSL) and unzipped these files into C:\curl version 7.31.0 Running the tools I used in my presentation Demonstration 1 (running Event Store) You can use one of my Event Store runner command files to run the single node version of Event Store, using default ports of 2213 for HTTP and 1113  for TCP, and with a wildcard HTTP pattern.  Both take a single command line parameter to specify the location of the data and log files.  The runners assume the single node executable is located in C:\EventStore\v2.0.1, and will placed data files and logs beneath C:\EventStore\Data, i.e. RunEventStore.cmd TestData1 This will create data files in C:\EventStore\Data\TestData1\Data and log files in C:\EventStore\Data\TestData1\logs. If, when running Event Store you may see the following message, [03288,15,06:23:00.622] Failed to start http server Access is denied You will either need to run Event Store in an administrator console window, or you can use the netsh command to create a firewall permission to allow HTTP listening (this will need to be run, once, in an administrator console window), netsh http add urlacl url=http://*:2213/ user=liam You can always delete this later by running the delete; netsh http delete urlacl url=http://*:2213/ If you want to confirm that everything is running OK, open the management console in a browser by navigating to http://127.0.0.1:2213. If at any point you are asked for a user name and password use the default of ‘admin’/‘changeit’.   Demonstration 2 (reading and adding data, curl) In my second demonstration I used curl directly from the console to read streams, write events and then read back those events. On GitHub I have included is a set of curl commands, CurlCommandLine.txt, and a sample data file, SampleData.json, to load an event into a DDDNorth3 stream. As there is not much data in the Event Store at this point I used the $stats-127.0.0.1:2113 which is a stream containing performance statistics for Event Store and is updated every 30 seconds (default). Demonstration 3 (projections) On GitHub I have included a sample projection, Projection-ByRoom.txt, which will create streams based on the room on which a session was held on the DDDNorth3 agenda. Browse to the management console, http://127.0.0.1:2213.  Click on Projections, New Projection, give it a name, Sessions-ByRoom, and copy in the JavaScript in the Projection-ByRoom.txt file.  Select Continuous, tick Emit Enabled and then click on Post. It should run immediately. You may by challenged for the administration login for the management console, if so use the default user name and password; 'admin'/'changeit'.   Demonstration 4 (C# client) The final demonstration was the Visual Studio 2012 project using the Event Store client – referenced directly as C:\EventStore\v2.0.1\EventStore.ClientAPI.dll, although you can switch this to the latest Event Store client NuGet package. The source code provides a console app for viewing projections with the projection manager (HTTP connection), as well as containing a full set of data for the entire DDDNorth3 agenda.  It also deals with the strategy for reading newest events backwards to older events and ignoring older events that have been superseded. Resources Event Store home page: http://www.geteventstore.com/ Event Store source code on GitHub: https://github.com/eventstore/eventstore Event Store documentation on GitHub: https://github.com/eventstore/eventstore/wiki (includes index to @RobAshton’s blog series on Event Store at https://github.com/eventstore/eventstore/wiki#rob-ashton---projections-series) Event Store forum in Google Groups: https://groups.google.com/forum/?fromgroups#!forum/event-store TopShelf Windows service wrapper is available on github: https://gist.github.com/trbngr/5083266

    Read the article

  • SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

    - by Brian Jackett
    This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

    Read the article

  • Learn About Oracle’s Strategy for a Simple, Modern User Experience at OpenWorld 2012

    - by Applications User Experience
    By Kathy Miedema, Oracle Applications User Experience If you’re interested in what the best possible user experience looks like, you’ll want to hear what Oracle’s Applications User Experience team is planning for OpenWorld 2012, Sept. 30-Oct. 4 in San Francisco. This year, we will talk Fusion, Fusion, Fusion. We were among the first to show Oracle Fusion Applications in the last couple of years, and we’ll be showing it again this year so you can see what Oracle is planning for the next generation of enterprise applications. Attend our sessions to learn more about the user experience strategy in which Oracle is investing. Simplicity is the driving force behind the demos that we are unveiling now, which you can see at OpenWorld. We want to create opportunities for productivity and efficiency, and deliver enterprise data across devices to help you do your work in the way best suited to your job and needs, said Jeremy Ashley, Vice President, Oracle Applications User Experience. You can see the new look for Fusion Applications at a general session led by Ashley at 3:30 p.m. on Wednesday, Oct. 3. You’ll also have the chance to learn more about tailoring in Oracle Fusion Applications, and gain a new understanding of the investment in the user experience behind Fusion Applications at our sessions (see session information below). Inside the Oracle Applications User Experience team’s on-site lab at Oracle OpenWorld 2011. Head to the demogrounds to see new demos from the Applications User Experience team, including the new look for Fusion Applications and what we’re building for mobile platforms. Take a spin on our eye tracker, a very cool tool that we use to research the usability of a particular design. Visit the Usable Apps OpenWorld page to find out where our demopods will be located. We are also recruiting participants for our on-site lab, in which we gather feedback on new user experience designs, and taking reservations for a charter bus that will bring you to Oracle headquarters for a lab tour Thursday, Oct. 4, or Friday, Oct. 5. Tours leave at 10 a.m. and 1:45 p.m. from the Moscone Center in San Francisco. You’ll see more of our newest designs at the lab tour, and some of our research tools in action. Can’t participate in a customer feedback session or take a lab tour this time around? Visit Usable Apps to participate or book a tour another time. For more information on any OpenWorld sessions, check the content catalog – also available at www.oracle.com/openworld. For information on Applications User Experience (Apps UX) sessions and activities, go to the Usable Apps OpenWorld page. APPS UX OPENWORLD SESSIONS Oracle’s Roadmap to a Simple, Modern User Experience Presenter: Jeremy Ashley, Vice President Applications User Experience, Oracle; with Debra Lilley, Fujitsu Consulting; Basheer Khan, Innowave; and Edward Roske, InterRelSession ID: CON9467Date: Wednesday, Oct. 3 Time: 3:30 - 4:30 p.m.Location: Moscone West - 3002/3004 Jeremy Ashley Oracle Fusion Applications: Transforming Insight into Action Presenters: Killian Evers and Kristin Desmond, OracleSession ID: CON8718Date: Thursday, Oct. 4Time: 11:15 a.m. - 12:15 p.m.Location: Moscone West - 2008 “FRIENDS OF UX” OPENWORLD SESSIONS Sessions by the Oracle Usability Advisory Board (OUAB) members: Advances in Oracle Enterprise Governance, Risk, and Compliance Manager  Presenters: Koen Delaure, KPMG Advisory NV, and Oracle Usability Advisory Board member; Russell Stohr, Oracle Session ID: CON9389Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: Palace Hotel - Concert Optimize Oracle E-Busines Suite Procure-to-Pay: Cut Inefficiences/Fraud with Oracle GRC Apps Presenters: Koen Delaure, KPMG Advisory NV, and Solveig Wagner, Seadrill Management AS, both Oracle Usability Advisory Board members; and Swarnali Bag, OracleSession ID: CON9401Date: Monday, Oct. 1Time: 12:15 - 1:15 p.m.Location: Intercontinental - Sutter Showcase of JD Edwards EnterpriseOne Mobility Presenters: Jon Wells, Westmoreland Coal Co., Oracle Usability Advisory Board member; Rob Mills and Liz Davson, Town of Oakville; Keith Sholes and Louise Farner, Oracle Session ID: CON9123Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: InterContinental - Grand Ballroom B Sessions by the Fusion User Experience Adovcates (FXA) Usability and Features of Oracle Fusion Applications, Built upon Oracle Fusion Middleware Presenters: Debra Lilley, Fujitsu Consulting and Oracle Usability Advisory Board member; John King, King Training ResourcesSession ID: UGF10371Date: Sunday, Sept. 30Time: 11 a.m. - 11:45 a.m. Location: Moscone West – 2010 Ten Things to Love About Oracle Fusion Project Portfolio Management  Presenter: Floyd Teter, EiS TechnologiesSession ID: CON6021Date: Tuesday, Oct. 2Time: 10:15 - 11:15 a.m.Location: Moscone West – 2003

    Read the article

  • Welcome to Jackstown

    - by fatherjack
    I live in a small town, the population count isn't that great but let me introduce you to some of the population. We'll start with Martin the Doc, he fixes up anything that gets poorly, so much so that he could be classed as the doctor, the vet and even the garage mechanic. He's got a reputation that he can fix anything and that hasn't been proved wrong yet. He's great friends with Brian (who gets called "Brains") the teacher who seems to have a sound understanding of any topic you care to pass his way. If he isn't sure he tells you and then goes to find out and comes back with a full answer real quick. Its good to have that sort of research capability close at hand. Brains is also great at encouraging anyone who needs a bit of support to get them up to speed and working on their jobs. Steve sees Brains regularly, that's because he is the librarian, he keeps all sorts of reading material and nowadays there's even video to watch about any topic you like. Steve keeps scouring all sorts of places to get the content that's needed and he keeps it in good order so that what ever is needed can be found quickly. He also has to make sure that old stuff gets marked as probably out of date so that anyone reading it wont get mislead. Over the road from him is Greg, he's the town crier. We don't have a newspaper here so Greg keeps us all informed of what's going on "out of town" - what new stuff we might make use of and what wont work in a small place like this. If we are interested he goes ahead and gets people in to demonstrate their products  and tell us about the details. Greg is pretty good at getting us discounts too. Now Greg's brother Ian works for the mayors office in the "waste management department" nowadays its all about the recycling but he still has to make sure that the stuff that cant be used any more gets disposed of properly. It depends on the type of waste he's dealing with that decides how it need to be treated and he has to know a lot about the different methods and when to use which ones. There are two people that keep the peace in town, Brent is the detective, investigating wrong doings and applying justice where necessary and Bart is the diplomat who smooths things over when any people have a dispute or disagreement. Brent is meticulous in his investigations and fair in the way he handles any situation he finds. Discretion is his byword. There's a rumour that Bart used to work for the United Nations but what ever his history there is no denying his ability to get apparently irreconcilable parties working together to their combined benefit. Someone who works closely with Bart is Brad, he is the translator in town. He has several languages that he can converse in but he can also explain things from someone's point of view or  and make it understandable to someone else. To keep things on the straight and narrow from a legal perspective is Ben the solicitor, making sure we all abide by the rules.Two people who make for an interesting evening's conversation if you get them together are Aaron and Grant, Aaron is the local planning inspector and Grant is an inventor of some reputation. Anything being constructed around here needs Aarons agreement. He's quite flexible in his rules though; if you can justify what you want to do with solid logic but he wont stand for any development going on without his inclusion. That gets a demolition notice and there's no argument. Grant as I mentioned is the inventor in town, if something can be improved or created then Grant is your man. He mainly works on his own but isnt averse to getting specific advice and assistance from specialist from out of town if they can help him finish his creations.There aren't too many people left for you to meet in the town, there's Rob, he's an ex professional sportsman. He played Hockey, Football, Cricket, you name it. He was in his element as goal keeper / wicket keeper and that shows in his personal life. He just goes about his business and people often don't even know that he's helped them. Really low profile, doesn't get any glory but saves people from lots of problems, even disasters on occasion. There goes Neil, he's a bit of an odd person, some people say he's gifted with special clairvoyant powers, personally I think he's got his ear to the ground and knows where to find out the important news as soon as its made public. Anyone getting a visit from Neil is best off to follow his advice though, he's usually spot on and you wont be caught by surprise if you follow his recommendations – wherever it comes from.Poor old Andrew is the last person to introduce you to. Andrew doesn't show himself too often but when he does it seems that people find a reason to blame him for their problems, whether he had anything to do with their predicament or not. In all honesty, without fail, and to his great credit, he takes it in good grace and never retaliates or gets annoyed when he's out and about.  It pays off too as its very often the case that those who were blaming him recently suddenly find they need his help and they readily forget the issues pretty rapidly.And then there's me, what do I do in town? Well, I'm just a DBA with a lot of hats. (Jackstown Pop. 1)

    Read the article

  • Architect Day: Boston - Agenda Update

    - by Bob Rhubart
    Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Boston, MA on September 12, 2012. Registration is open, but seating is limited. When: September 12, 2012 8:30am – 5:00pm Where: Boston Marriott Burlington One Burlington Mall Road Burlington, MA 01803 Register now Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast Salon E Foyer 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Salon E 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Salon E 10:00 am - 10:30 am Securing Public and Private Clouds | Anton Nielsen Long before the term "Cloud Computing" existed, Oracle technologies supported and promoted the concept. Centralized data with remote users has been at the core of these technologies for decades. The public cloud, and extending private clouds to the internet, though, has added security challenges never imagined decades ago. This presentation will examine a real life security breach and introduce architecture, technologies and policies to secure public and private clouds.  Salon E 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Scott Mattoon The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Salon E Innovations in Grid Computing with Oracle Coherence | Rob Misek Learn how Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Salon C 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Salon E Oracle Enterprise Manager | Avi Huber Much more than a DB management tool, Oracle Enterprise Manager provides management and monitoring coverage for the entire Oracle stack, and beyond. This session will concentrate on the middleware management functionality in OEM, starting with Real User Experience monitoring, through AppServer management, and into deep-dive Java diagnostics. We’ll discuss Business Driven Application Management (BDAM) and the benefits of top-down monitoring. Lastly, we’ll demonstrate how to trace a specific user experience problem, through a multitier SOA application, to its root cause, deep in the JVM. Salon C 12:15 pm - 1:15 pm Lunch Salon E Foyer 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Salon E 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy (ETS). Salon E 21st Century SOA | Peter Belknap Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. And we'll take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Salon C 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Salon E 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Salon E 4:15 pm - 5:00 pm Networking / Reception Salon E Foyer Note: Session schedule and content subject to change.

    Read the article

  • Whoosh: PASS Board Year 1, Q4

    - by Denise McInerney
    "Whoosh". That's the sound the last quarter of 2012 made as it rushed by. My first year on the PASS Board is complete, and the last three months of it were probably the busiest. PASS Summit 2012 Much of October was devoted to preparing for Summit. Every Board  member, HQ staffer and dozens of volunteers were busy in the run-up to our flagship event. It takes a lot of work to put on the Summit. The community meetings,  first-timers program, keynotes, sessions and that fabulous Community Appreciation party are the result of many hours of preparation. Virtual Chapters at the Summit With a lot of help from Karla Landrum, Michelle Nalliah, Lana Montgomery and others at HQ the VCs had a good presence at Summit. We started the week with a VC leaders meeting. I shared some information about the activities and growth during the first part of the year.   From January - September 2012: The number of VCs increased from 14 to 20 VC membership  grew from 55,200 to 80,100 Total attendance at VC meetings increased from 1,480 to 2,198 Been part of PASS Global Growth with language-based VC- including Chinese, Spanish and Portuguese. We also heard from some VC leaders and volunteers. Ryan Adams (Performance VC) shared his tips for successful marketing of VC events. Amy Lewis (Business Intelligence VC) described how the BI chapter has expanded to support PASS' global growth by finding volunteers to organize events at times that are convenient for people in Europe and Australia. Felipe Ferreira (Portuguese language VC) described the experience of building a user group first in Brazil, then expanding to work with Portuguese-speaking data professionals around the world. Virtual Chapter leaders and volunteers were in evidence throughout Summit, beginning with the Welcome Reception. For the past several years VCs have had an organized presence at this event, signing up new members and advertising their meetings. Many VC leaders also spent time at the Community Zone. This new addition to the Summit proved to be a vibrant spot were new members and volunteers could network with others and find out how to start a chapter or host a SQL Saturday. Women In Technology 2012 was the 10th WIT Luncheon to be held at Summit. I was honored to be asked to be on the panel to discuss the topic "Where Have We Been and Where are We Going?" The PASS community has come a long way in our understanding of issues facing women in tech and our support of women in the organization. It was great to hear from panelists Stefanie Higgins and Kevin Kline who were there at the beginning as well as Kendra Little and Jen Stirrup who are part of the progress being made by women in our community today. Bylaw Changes The Board spent a good deal of time in 2012 discussing how to move our global growth initiatives forward. An important component of this is a proposed change to how the Board is elected with some seats representing geographic regions. At the end of December we voted on these proposed bylaw changes which have been published for review. The member review and feedback is open until February 8. I encourage all members to review these changes and send any feedback to [email protected]  In addition to reading the bylaws, I recommend reading Bill Graziano's blog post on the subject. Business Analytics Conference At Summit we announced a new event: the PASS Business Analytics Conference. The inaugural event will be April 10-12, 2013 in Chicago. The world of data is changing rapidly. More and more businesses want to extract value and insight from their data. Data professionals who provide these insights or enable others to do so are in demand. The BA Conference offers expert content on predictive analytics, data exploration and visualization, content delivery strategies and more. By holding this new event PASS is participating in important discussions happening in our industry, offering our members more educational value and reaching out to data professionals who are not currently part of our organization. New Year, New Portfolio In addition to my work with the Virtual Chapters I am also now responsible for the 24 Hours of PASS portfolio. Since the first 24HOP of 2013 is scheduled for January 30 we started the transition of the portfolio work from Rob Farley to me right after Summit. Work immediately started to secure speakers for the January event. We have also been evaluating webinar platforms that can be used for 24HOP as well as the Virtual Chapters. Next Up 24 Hours of PASS: Business Analytics Edition will be held on January 30. I'll be there and will moderate one or two sessions. The 24HOP topics are a sneak peek into the type of content that will be offered at the Business Analytics Conference. I hope to see some of you there. The Virtual Chapters have hit the ground running in 2013; many of them have events scheduled. The Application Development VC is getting restarted  and a new Business Analytics VC will be starting soon. Check out the lineup and join the VCs that interest you. And watch the Events page and Connector for announcements of upcoming meetings. At the end of January I will be attending a Board meeting in Seattle, and February 23 I will be at SQL Saturday #177 in Silicon Valley.

    Read the article

  • Why does Sharepoint 2010 Web Reference work, but Service Reference does not

    - by Darien Ford
    Sharepoint is setup to use NTLM authentication. When I reference http://myserver/Sites/Ops/_vti_bin/Lists.asmx?WSDL as a Web Reference, I can call the methods and get valid responses. When I reference the same url as a Service Reference, the server throws an exception when calling methods. My account is admin on the Sharepoint Farm. This is the app.config for the service reference (mostly auto generated): <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> </configSections> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="ListsSoap" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Ntlm" /> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://myserver/Sites/Ops/_vti_bin/Lists.asmx" binding="basicHttpBinding" bindingConfiguration="ListsSoap" contract="SharepointLists.ListsSoap" name="ListsSoap" /> </client> </system.serviceModel> </configuration> Saddly, the only information the exception provides is this: "Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown." No other details. The code that I'm using is: public ListClass() { _Client = new SharepointLists.ListsSoapClient(); } public System.Xml.Linq.XElement GetTaskList() { return _Client.GetList("Tasks"); } Any thoughts? I would like to use the Service Reference rather than the Web Reference. UPDATE: I tried Rob's suggestion and got this error: HTTP GET Error URI: http://myserver/Sites/Ops/_vti_bin/Lists.asmx The document at the url http://myserver/Sites/Ops/_vti_bin/Lists.asmx was not recognized as a known document type. The error message from each known type may help you fix the problem: - Report from 'http://myserver/Sites/Ops/_vti_bin/Lists.asmx' is 'The document format is not recognized (the content type is 'text/html; charset=utf-8').'. - Report from 'DISCO Document' is 'There was an error downloading 'http://myserver/_vti_bin/Lists.asmx?disco'.'. - The request failed with HTTP status 404: Not Found. - Report from 'WSDL Document' is 'The document format is not recognized (the con tent type is 'text/html; charset=utf-8').'. - Report from 'XML Schema' is 'The document format is not recognized (the conten t type is 'text/html; charset=utf-8').'.

    Read the article

  • Revisiting .NET, but what should I focus on?

    - by Wayne M
    After about a two-year hiatus, I'm brushing up on my .NET skills to find a .NET job (my previous two positions have very little development, or development using legacy technologies, so apart from a few very minor apps I have not touched .NET in close to two years). I'm aware of things like ASP.NET MVC, and I have previously read on things like NHibernate and DI/IOC, albeit I have yet to use them apart from very trivial "Hello World" type applications. I have a subscription to Rob Conery's Tekpub website and occasionally watch these videos when I have free time. My concern is this: I don't live in a very technical area. I would be surprised if any but the most tech-savvy companies have heard of, let alone use, ASP.NET MVC, NHibernate (or even LINQ/EF), or know about IoC. I would be willing to bet a large sum of money that 95% of the possible jobs I could obtain will use the following: Visual Source Safe, if any VCS at all ASP.NET 2.0 Webforms (3.5 if lucky) Raw ADO.NET on top of a very thin implementation of the Gateway pattern Stored Procedures in the database for most CRUD operations Gratuitous use of code-behind, with a Service layer if I'm lucky If I were extremely lucky, I might find a shop that has heard of ORMs and either uses one, or has wrote their own data abstraction. Also if I were lucky, the company would be using Model-View-Presenter. In light of this I'm not sure what I should focus on learning. Personally, I would prefer to be using the latest stuff - ASP.NET MVC, NHibernate, jQuery, WCF etc. Reality says I should go back to the basics, since it looks like most potential opportunities aren't going to be anywhere near the cutting edge, or anywhere close to it. And, as much as I would like to find a position and start to show the other developers the benefits, in my past experience this has usually resulted in my being fired for "not being a team player" and doing things the bad old way. So, I am curious how you would approach a situation like this? What should I focus on, in order to A) Reaquaint myself with .NET, and B) Prepare myself to obtain a .NET job again that is more than likely going to use techniques that I and most other knowledgeable developers will scoff at?

    Read the article

  • How to do role-based access control for a franchise business?

    - by FreshCode
    I'm building the 2nd iteration of a web-based CRM+CMS for a franchise service business in ASP.NET MVC 2. I need to control access to each franchise's services based on the roles a user is assigned for that franchise. 4 examples: Receptionist should be able to book service jobs in for her "Atlantic Seaboard" franchise, but not do any reporting. Technician should be able to alter service jobs, but not modify invoices. Managers should be able to apply discount to invoices for jobs within their stores. Owner should be able to pull reports for any franchises he owns. Where should franchise-level access control fit in between the Data - Services - Web layer? If it belongs in my Controllers, how should I best implement it? Partial Schema Roles class int ID { get; set; } // primary key for Role string Name { get; set; } Partial Franchises class short ID { get; set; } // primary key for Franchise string Slug { get; set; } // unique key for URL access, eg /{franchise}/{job} string Name { get; set; } UserRoles mapping short FranchiseID; // related to franchises table Guid UserID; // related to Users table int RoleID; // related to Roles table DateTime ValidFrom; DateTime ValidUntil; Background I built the previous CRM in classic ASP and it runs the business well, but it's time for an upgrade to speed up workflow and leave less room for error. For the sake of proper testing and better separation between data and presentation, I decided to implement the repository pattern as seen in Rob Conery's MVC Storefront series. Controller Implementation Access Control with [Authorize] attribute If there was just one franchise involved, I could simply limit access to a controller action like so: [Authorize(Roles="Receptionist, Technician, Manager, Owner")] public ActionResult CreateJob(Job job) { ... } And since franchises don't just pop up over night, perhaps this is a strong case to use the new Areas feature in ASP.NET MVC 2? Or would this lead to duplicate Views? Controllers, URL Routing & Areas Assuming Areas aren't used, what would be the best way to determine which franchise's data is being accessed? I thought of this: {franchise}/{controller}/{action}/{id} or is it better to determine a job's franchise in a Details(...) action and limit a user's action with [Authorize]: {job}/{id}/{action}/{subaction} {invoice}/{id}/{action}/{subaction} which makes more sense if any user could potentially have access to more than one franchise without cluttering the URL with a {franchise} parameter. Any input is appreciated.

    Read the article

  • How do you unit test a unit test?

    - by FlySwat
    I was watching Rob Connerys webcasts on the MVCStoreFront App, and I noticed he was unit testing even the most mundane things, things like: public Decimal DiscountPrice { get { return this.Price - this.Discount; } } Would have a test like: [TestMethod] public void Test_DiscountPrice { Product p = new Product(); p.Price = 100; p.Discount = 20; Assert.IsEqual(p.DiscountPrice,80); } While, I am all for unit testing, I sometimes wonder if this form of test first development is really beneficial, for example, in a real process, you have 3-4 layers above your code (Business Request, Requirements Document, Architecture Document), where the actual defined business rule (Discount Price is Price - Discount) could be misdefined. If that's the situation, your unit test means nothing to you. Additionally, your unit test is another point of failure: [TestMethod] public void Test_DiscountPrice { Product p = new Product(); p.Price = 100; p.Discount = 20; Assert.IsEqual(p.DiscountPrice,90); } Now the test is flawed. Obviously in a simple test, it's no big deal, but say we were testing a complicated business rule. What do we gain here? Fast forward two years into the application's life, when maintenance developers are maintaining it. Now the business changes its rule, and the test breaks again, some rookie developer then fixes the test incorrectly...we now have another point of failure. All I see is more possible points of failure, with no real beneficial return, if the discount price is wrong, the test team will still find the issue, how did unit testing save any work? What am I missing here? Please teach me to love TDD, as I'm having a hard time accepting it as useful so far. I want too, because I want to stay progressive, but it just doesn't make sense to me. EDIT: A couple people keep mentioned that testing helps enforce the spec. It has been my experience that the spec has been wrong as well, more often than not, but maybe I'm doomed to work in an organization where the specs are written by people who shouldn't be writing specs.

    Read the article

  • Android Drawable question.

    - by Tarmon
    Hey Everyone, I am trying to create a drawable in code and change the color based on some criteria. I can get it to work but it doesn't want to let me set the padding on the view. Any help would be appreciated. <?xml version="1.0" encoding="utf-8"?> <ImageView android:id="@+id/icon" android:layout_width="50px" android:layout_height="fill_parent" /> <TextView android:id="@+id/label" android:layout_width="wrap_content" android:layout_height="wrap_content" android:paddingLeft="17px" android:textSize="28sp" /> ImageView icon = (ImageView) row.findViewById(R.id.icon); ShapeDrawable mDrawable; int x = 0; int y = 0; int width = 50; int height = 50; float[] outerR = new float[] { 12, 12, 12, 12, 12, 12, 12, 12 }; mDrawable = new ShapeDrawable(new RoundRectShape(outerR, null, null)); mDrawable.setBounds(x, y+height, x + width, y); switch(position){ case 0: mDrawable.getPaint().setColor(0xffff0000); //Red break; case 1: mDrawable.getPaint().setColor(0xffff0000); //Red break; case 2: mDrawable.getPaint().setColor(0xff00c000); //Green break; case 3: mDrawable.getPaint().setColor(0xff00c000); //Green break; case 4: mDrawable.getPaint().setColor(0xff0000ff); //Blue break; case 5: mDrawable.getPaint().setColor(0xff0000ff); //Blue break; case 6: mDrawable.getPaint().setColor(0xff696969); //Gray break; case 7: mDrawable.getPaint().setColor(0xff696969); //Gray break; case 8: mDrawable.getPaint().setColor(0xffffff00); //Yellow break; case 9: mDrawable.getPaint().setColor(0xff8b4513); //Brown break; case 10: mDrawable.getPaint().setColor(0xff8b4513); //Brown break; case 11: mDrawable.getPaint().setColor(0xff8b4513); //Brown break; case 12: mDrawable.getPaint().setColor(0xffa020f0); //Purple break; case 13: mDrawable.getPaint().setColor(0xffff0000); //Red break; case 14: mDrawable.getPaint().setColor(0xffffd700); //Gold break; case 15: mDrawable.getPaint().setColor(0xffff6600); //Orange break; } icon.setBackgroundDrawable(mDrawable); icon.setPadding(5, 5, 5, 5); If I set the padding in XML it just ignores it. Thanks, Rob

    Read the article

  • Creating a ListView and setting the background color of a view in each row.

    - by Tarmon
    Hey Everyone, I am trying to implement a ListView that is composed of rows that contain a View on the left followed by a TextView to the right of that. I want to be able to change the background color of the first View based on it's position in the ListView. Below is what I have at this point but it doesn't seem to due anything. public class Routes extends ListActivity { String[] ROUTES; TextView selection; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); ROUTES = getResources().getStringArray(R.array.routes); setContentView(R.layout.routes); setListAdapter(new IconicAdapter()); selection=(TextView)findViewById(R.id.selection); } public void onListItemClick(ListView parent, View v, int position, long id) { selection.setText(ROUTES[position]); } class IconicAdapter extends ArrayAdapter<String> { IconicAdapter() { super(Routes.this, R.layout.row, R.id.label, ROUTES); } } public View getView(int position, View convertView, ViewGroup parent) { LayoutInflater inflater = getLayoutInflater(); View row = inflater.inflate(R.layout.row, parent, false); TextView label = (TextView) row.findViewById(R.id.label); label.setText(ROUTES[position]); View icon = (View) row.findViewById(R.id.icon); switch(position){ case 0: icon.setBackgroundColor(R.color.Red); break; case 1: icon.setBackgroundColor(R.color.Red); break; case 2: icon.setBackgroundColor(R.color.Green); break; case 3: icon.setBackgroundColor(R.color.Green); break; case 4: icon.setBackgroundColor(R.color.Blue); break; case 5: icon.setBackgroundColor(R.color.Blue); break; } return(row); } } Any input is appreciated and if you have any questions don't hesitate to ask! Thanks, Rob

    Read the article

  • Wix Bootstrapper - difficulty detecting if software is already installed c++ redistributable, sql server ce 3.5 sp2

    - by gdeck
    I apologize if this is answered elsewhere. So far (thanks to a post from Rob Mensching), my code will detect .NET 4.0 if it's installed and it'll pass right over it. I'm not able to correctly detect Microsoft Visual C++ 2010 x86 Redistributable OR Microsoft SQL Server Compact 3.5 Service Pack 2. My code is below. I'm learning, so I would appreciate as much constructive criticism as possible. <!--Search for .NET 4.0--> <util:RegistrySearch Id="NETFRAMEWORK40" Root="HKLM" Key="SOFTWARE\Microsoft\Net Framework Setup\NDP\v4\Full" Value="Install" Variable="NETFRAMEWORK40" Result="value"/> <!--Search for Microsoft Visual C++ 2010 x86 Redistributable--> <util:RegistrySearch Id="SearchForCPP2010X86" Root="HKLM" Key="SOFTWARE\Microsoft\VisualStudio\10.0\VC\VCRedist\x86" Value="Install" Variable="CPP2010Redist" Result="exists"/> <!--Search for Microsoft SQL Server Compact 3.5 Service Pack 2--> <util:RegistrySearch Id="SearchForSQLSvrCE35SP2" Root="HKLM" Key="SOFTWARE\Microsoft\Microsoft SQL Server Compact Edition\v3.5\ENU" Value="Install" Variable="SQLSvrCE35SP2" Result="exists"/> <Chain> <!-- Install .Net 4 Full --> <PackageGroupRef Id="Net4Full"/> <!-- Install Microsoft Visual C++ 2010 x86 Redistributable --> <PackageGroupRef Id="MSVisCPP2010x86Redist"/> <!-- Install Microsoft SQL Server Compact 3.5 Service Pack 2 --> <PackageGroupRef Id="SQLExpressCE"/> </Chain> <!--Install .NET 4.0--> <PackageGroup Id="Net4Full"> <ExePackage Id="Net4Full" Name="Microsoft .NET Framework 4.0 Setup" Cache="no" Compressed="yes" PerMachine="yes" Permanent="yes" Vital="yes" SourceFile="BootstrapperLibrary\dotNetFx40_Full_setup.exe" DetectCondition="NETFRAMEWORK40"/> </PackageGroup> <!--Install Microsoft Visual C++ 2010 x86 Redistributable--> <PackageGroup Id="MSVisCPP2010x86Redist"> <ExePackage Id="MSVisCPP2010x86Redis" Name="Microsoft Visual C++ 2010 x86 Redistributable " Cache="no" Compressed="yes" PerMachine="yes" Permanent="yes" Vital="yes" SourceFile="BootstrapperLibrary\vcredist_x86.exe" DetectCondition="CPP2010Redist"/> </PackageGroup> <!--Install Microsoft SQL Server Compact 3.5 Service Pack 2--> <PackageGroup Id="SQLExpressCE"> <ExePackage Id="SQLExpressCE" Name="Microsoft SQL Server Compact 3.5 Service Pack 2 Setup" Cache="no" Compressed="yes" PerMachine="yes" Permanent="yes" Vital="yes" SourceFile="BootstrapperLibrary\SSCERuntime-ENU.exe"/> </PackageGroup>

    Read the article

  • Useful software for netbook?

    - by Moayad Mardini
    I'm looking for recommendations of good software that are particularly useful for netbooks. Software that run great on small screens and low CPU/RAM requirments. I'll start off with the following : Operating Systems: Ubuntu Netbook Remix. Easy Peasy: A fork of Ubuntu Netbook Remix that was once called UBuntu EEE. It isn't just for eeePCs though. Definitely worth a look if vanilla Netbook Remix isn't cutting it. (MarkM) Damn Small Linux (Source) Windows 7: With trimming the installation or compressing the Windows directory to fit on an 8GB SSD. (Will Eddins) nLite: A utility to install a lightweight version of Windows XP without the unnecessary components (like Media Player, Internet Explorer, Outlook Express, MSN Explorer, Messenger...). Utilites: TouchFreeze: To disable the touch pad while typing (Source) InSSIDer: Not only does it make it easier to find and keep a wireless connection, but it turns a netbook into the perfect mobile tool for troubleshooting wireless networks. (phenry) AltMove: Adds more functionality to your mouse for interacting with windows. (Rob) ASUS Font Resizer Utility and other tools by ASUS, specific to ASUS Eee PC series. Internet: Run FileZilla FTP client for a small screen : You can hide a lot of FileZilla's interface parts in the View menu, even the directory trees. Go into Settings = Interface and move the message log next to the transfer queue, if you haven't hidden them both or you want to see them. Select a theme with 16x16 icons. (Source) IDEs and Text Editors: Best lightweight IDE/Text Editor: A question on Stack Overflow that has many good suggestions of IDEs and general text editors for programmers. What’s a good linux C/C++ IDE for a low-res screen?: IDEs for Linux-powered netbooks. Online tools: Dropbox: Since the Netbook has limited disk space, you would like to use Cloud Apps like Dropbox and Ubuntu One so that you don't run out of space especially if you are on a holiday. Later when you go back to your desktop with big hard disk,you can take out the files from your dropbox repo. (Manish Sinha) Google products: like Docs, Calendar and Reader (aviraldg) Web sites and software lists: Netbookfiles.com: Netbook specific software downloads. Software Apps to Maximise your Netbook Battery Power: Netbooks are known for their portability. Not only are they small and lightweight but with their increased power efficiency, batteries can last much longer than conventional laptops. This also means you no longer have to carry a power adapter with you! Several brands emphasis the longevity of the battery as a strong selling point, and for those people who travel a lot, it sure is. Free Must-Have Netbook Apps: Finding software for netbooks can present challenges due to limited hard drive space, processor power, RAM, and screen real-estate. That doesn't mean you have to do without essential programs. The apps below cover all the bases -- entertainment, productivity, security, and communication -- without compromising on performance or usability. Best of all, they're free! Useful Netbook Software: With short battery lives and small resolution screens Netbooks, unlike many other computers on the market, could so with some specific software for their use. Now, not all of those I’ve found are specifically designed for Netbooks, but all are relevant. And they’re designed for Windows XP. The question is community wiki, so feel free to edit it. Updated, thank you all for suggestions.

    Read the article

  • Multi-tenant ASP.NET MVC – Introduction

    - by zowens
    I’ve read a few different blogs that talk about multi-tenancy and how to resolve some of the issues surrounding multi-tenancy. What I’ve come to realize is that these implementations overcomplicate the issues and give only a muddy implementation! I’ve seen some really illogical code out there. I have recently been building a multi-tenancy framework for internal use at eagleenvision.net. Through this process, I’ve realized a few different techniques to make building multi-tenant applications actually quite easy. I will be posting a few different entries over the issue and my personal implementation. In this first post, I will discuss what multi-tenancy means and how my implementation will be structured.   So what’s the problem? Here’s the deal. Multi-tenancy is basically a technique of code-reuse of web application code. A multi-tenant application is an application that runs a single instance for multiple clients. Here the “client” is different URL bindings on IIS using ASP.NET MVC. The problem with different instances of the, essentially, same application is that you have to spin up different instances of ASP.NET. As the number of running instances of ASP.NET grows, so does the memory footprint of IIS. Stack Exchange shifted its architecture to multi-tenancy March. As the blog post explains, multi-tenancy saves cost in terms of memory utilization and physical disc storage. If you use the same code base for many applications, multi-tenancy just makes sense. You’ll reduce the amount of work it takes to synchronize the site implementations and you’ll thank your lucky stars later for choosing to use one application for multiple sites. Multi-tenancy allows the freedom of extensibility while relying on some pre-built code.   You’d think this would be simple. I have actually seen a real lack of reference material on the subject in terms of ASP.NET MVC. This is somewhat surprising given the number of users of ASP.NET MVC. However, I will certainly fill the void ;). Implementing a multi-tenant application takes a little thinking. It’s not straight-forward because the possibilities of implementation are endless. I have yet to see a great implementation of a multi-tenant MVC application. The only one that comes close to what I have in mind is Rob Ashton’s implementation (all the entries are listed on this page). There’s some really nasty code in there… something I’d really like to avoid. He has also written a library (MvcEx) that attempts to aid multi-tenant development. This code is even worse, in my honest opinion. Once I start seeing Reflection.Emit, I have to assume the worst :) In all seriousness, if his implementation makes sense to you, use it! It’s a fine implementation that should be given a look. At least look at the code. I will reference MvcEx going forward as a comparison to my implementation. I will explain why my approach differs from MvcEx and how it is better or worse (hopefully better).   Core Goals of my Multi-Tenant Implementation The first, and foremost, goal is to use Inversion of Control containers to my advantage. As you will see throughout this series, I pass around containers quite frequently and rely on their use heavily. I will be using StructureMap in my implementation. However, you could probably use your favorite IoC tool instead. <RANT> However, please don’t be stupid and abstract your IoC tool. Each IoC is powerful and by abstracting the capabilities, you’re doing yourself a real disservice. Who in the world swaps out IoC tools…? No one!</RANT> (It had to be said.) I will outline some of the goodness of StructureMap as we go along. This is really an invaluable tool in my tool belt and simple to use in my multi-tenant implementation. The second core goal is to represent a tenant as easily as possible. Just as a dependency container will be a first-class citizen, so will a tenant. This allows us to easily extend and use tenants. This will also allow different ways of “plugging in” tenants into your application. In my implementation, there will be a single dependency container for a single tenant. This will enable isolation of the dependencies of the tenant. The third goal is to use composition as a means to delegate “core” functions out to the tenant. More on this later.   Features In MvcExt, “Modules” are a code element of the infrastructure. I have simplified this concept and have named this “Features”. A feature is a simple element of an application. Controllers can be specified to have a feature and actions can have “sub features”. Each tenant can select features it needs and the other features will be hidden to the tenant’s users. My implementation doesn’t require something to be a feature. A controller can be common to all tenants. For example, (as you will see) I have a “Content” controller that will return the CSS, Javascript and Images for a tenant. This is common logic to all tenants and shouldn’t be hidden or considered a “feature”; Content is a core component.   Up next My next post will be all about the code. I will reveal some of the foundation to the way I do multi-tenancy. I will have posts dedicated to Foundation, Controllers, Views, Caching, Content and how to setup the tenants. Each post will be in-depth about the issues and implementation details, while adhering to my core goals outlined in this post. As always, comment with questions of DM me on twitter or send me an email.

    Read the article

  • Mulit-tenant ASP.NET MVC – Controllers

    - by zowens
    Part I – Introduction Part II – Foundation   The time has come to talk about controllers in a multi-tenant ASP.NET MVC architecture. This is actually the most critical design decision you will make when dealing with multi-tenancy with MVC. In my design, I took into account the design goals I mentioned in the introduction about inversion of control and what a tenant is to my design. Be aware that this is only one way to achieve multi-tenant controllers.   The Premise MvcEx (which is a sample written by Rob Ashton) utilizes dynamic controllers. Essentially a controller is “dynamic” in that multiple action results can be placed in different “controllers” with the same name. This approach is a bit too complicated for my design. I wanted to stick with plain old inheritance when dealing with controllers. The basic premise of my controller design is that my main host defines a set of universal controllers. It is the responsibility of the tenant to decide if the tenant would like to utilize these core controllers. This can be done either by straight usage of the controller or inheritance for extension of the functionality defined by the controller. The controller is resolved by a StructureMap container that is attached to the tenant, as discussed in Part II.   Controller Resolution I have been thinking about two different ways to resolve controllers with StructureMap. One way is to use named instances. This is a really easy way to simply pull the controller right out of the container without a lot of fuss. I ultimately chose not to use this approach. The reason for this decision is to ensure that the controllers are named properly. If a controller has a different named instance that the controller type, then the resolution has a significant disconnect and there are no guarantees. The final approach, the one utilized by the sample, is to simply pull all controller types and correlate the type with a controller name. This has a bit of a application start performance disadvantage, but is significantly more approachable for maintainability. For example, if I wanted to go back and add a “ControllerName” attribute, I would just have to change the ControllerFactory to suit my needs.   The Code The container factory that I have built is actually pretty simple. That’s really all we need. The most significant method is the GetControllersFor method. This method makes the model from the Container and determines all the concrete types for IController.  The thing you might notice is that this doesn’t depend on tenants, but rather containers. You could easily use this controller factory for an application that doesn’t utilize multi-tenancy. public class ContainerControllerFactory : IControllerFactory { private readonly ThreadSafeDictionary<IContainer, IDictionary<string, Type>> typeCache; public ContainerControllerFactory(IContainerResolver resolver) { Ensure.Argument.NotNull(resolver, "resolver"); this.ContainerResolver = resolver; this.typeCache = new ThreadSafeDictionary<IContainer, IDictionary<string, Type>>(); } public IContainerResolver ContainerResolver { get; private set; } public virtual IController CreateController(RequestContext requestContext, string controllerName) { var controllerType = this.GetControllerType(requestContext, controllerName); if (controllerType == null) return null; var controller = this.ContainerResolver.Resolve(requestContext).GetInstance(controllerType) as IController; // ensure the action invoker is a ContainerControllerActionInvoker if (controller != null && controller is Controller && !((controller as Controller).ActionInvoker is ContainerControllerActionInvoker)) (controller as Controller).ActionInvoker = new ContainerControllerActionInvoker(this.ContainerResolver); return controller; } public void ReleaseController(IController controller) { if (controller != null && controller is IDisposable) ((IDisposable)controller).Dispose(); } internal static IEnumerable<Type> GetControllersFor(IContainer container) { Ensure.Argument.NotNull(container); return container.Model.InstancesOf<IController>().Select(x => x.ConcreteType).Distinct(); } protected virtual Type GetControllerType(RequestContext requestContext, string controllerName) { Ensure.Argument.NotNull(requestContext, "requestContext"); Ensure.Argument.NotNullOrEmpty(controllerName, "controllerName"); var container = this.ContainerResolver.Resolve(requestContext); var typeDictionary = this.typeCache.GetOrAdd(container, () => GetControllersFor(container).ToDictionary(x => ControllerFriendlyName(x.Name))); Type found = null; if (typeDictionary.TryGetValue(ControllerFriendlyName(controllerName), out found)) return found; return null; } private static string ControllerFriendlyName(string value) { return (value ?? string.Empty).ToLowerInvariant().Without("controller"); } } One thing to note about my implementation is that we do not use namespaces that can be utilized in the default ASP.NET MVC controller factory. This is something that I don’t use and have no desire to implement and test. The reason I am not using namespaces in this situation is because each tenant has its own namespaces and the routing would not make sense in this case.   Because we are using IoC, dependencies are automatically injected into the constructor. For example, a tenant container could implement it’s own IRepository and a controller could be defined in the “main” project. The IRepository from the tenant would be injected into the main project’s controller. This is quite a useful feature.   Again, the source code is on GitHub here.   Up Next Up next is the view resolution. This is a complicated issue, so be prepared. I hope that you have found this series useful. If you have any questions about my implementation so far, send me an email or DM me on Twitter. I have had a lot of great conversations about multi-tenancy so far and I greatly appreciate the feedback!

    Read the article

  • SQL Server 2008 R2 Reporting Services - The Word is But a Stage (T-SQL Tuesday #006)

    - by smisner
    Host Michael Coles (blog|twitter) has selected LOB data as the topic for this month's T-SQL Tuesday, so I'll take this opportunity to post an overview of reporting with spatial data types. As part of my work with SQL Server 2008 R2 Reporting Services, I've been exploring the use of spatial data types in the new map data region. You can create a map using any of the following data sources: Map Gallery - a set of Shapefiles for the United States only that ships with Reporting Services ESRI Shapefile - a .shp file conforming to the Environmental Systems Research Institute, Inc. (ESRI) shapefile spatial data format SQL Server spatial data - a query that includes SQLGeography or SQLGeometry data types Rob Farley (blog|twitter) points out today in his T-SQL Tuesday post that using the SQL geography field is a preferable alternative to ESRI shapefiles for storing spatial data in SQL Server. So how do you get spatial data? If you don't already have a GIS application in-house, you can find a variety of sources. Here are a few to get you started: US Census Bureau Website, http://www.census.gov/geo/www/tiger/ Global Administrative Areas Spatial Database, http://biogeo.berkeley.edu/gadm/ Digital Chart of the World Data Server, http://www.maproom.psu.edu/dcw/ In a recent post by Pinal Dave (blog|twitter), you can find a link to free shapefiles for download and a tutorial for using Shape2SQL, a free tool to convert shapefiles into SQL Server data. In my post today, I'll show you how to use combine spatial data that describes boundaries with spatial data in AdventureWorks2008R2 that identifies stores locations to embed a map in a report. Preparing the spatial data First, I downloaded Shapefile data for the administrative boundaries in France and unzipped the data to a local folder. Then I used Shape2SQL to upload the data into a SQL Server database called Spatial. I'm not sure of the reason why, but I had to uncheck the option to create a spatial index to upload the data. Otherwise, the upload appeared to run successfully, but no table appeared in my database. The zip file that I downloaded contained three files, but I didn't know what was in them until I used Shape2SQL to upload the data into tables. Then I found that FRA_adm0 contains spatial data for the country of France, FRA_adm1 contains spatial data for each region, and FRA_adm2 contains spatial data for each department (a subdivision of region). Next I prepared my SQL query containing sales data for fictional stores selling Adventure Works products in France. The Person.Address table in the AdventureWorks2008R2 database (which you can download from Codeplex) contains a SpatialLocation column which I joined - along with several other tables - to the Sales.Customer and Sales.Store tables. I'll be able to superimpose this data on a map to see where these stores are located. I included the SQL script for this query (as well as the spatial data for France) in the downloadable project that I created for this post. Step 1: Using the Map Wizard to Create a Map of France You can build a map without using the wizard, but I find it's rather useful in this case. Whether you use Business Intelligence Development Studio (BIDS) or Report Builder 3.0, the map wizard is the same. I used BIDS so that I could create a project that includes all the files related to this post. To get started, I added an empty report template to the project and named it France Stores. Then I opened the Toolbox window and dragged the Map item to the report body which starts the wizard. Here are the steps to perform to create a map of France: On the Choose a source of spatial data page of the wizard, select SQL Server spatial query, and click Next. On the Choose a dataset with SQL Server spatial data page, select Add a new dataset with SQL Server spatial data. On the Choose a connection to a SQL Server spatial data source page, select New. In the Data Source Properties dialog box, on the General page, add a connecton string like this (changing your server name if necessary): Data Source=(local);Initial Catalog=Spatial Click OK and then click Next. On the Design a query page, add a query for the country shape, like this: select * from fra_adm1 Click Next. The map wizard reads the spatial data and renders it for you on the Choose spatial data and map view options page, as shown below. You have the option to add a Bing Maps layer which shows surrounding countries. Depending on the type of Bing Maps layer that you choose to add (from Road, Aerial, or Hybrid) and the zoom percentage you select, you can view city names and roads and various boundaries. To keep from cluttering my map, I'm going to omit the Bing Maps layer in this example, but I do recommend that you experiment with this feature. It's a nice integration feature. Use the + or - button to rexize the map as needed. (I used the + button to increase the size of the map until its edges were just inside the boundaries of the visible map area (which is called the viewport). You can eliminate the color scale and distance scale boxes that appear in the map area later. Select the Embed map data in this report for faster rendering. The spatial data won't be changing, so there's no need to leave it in the database. However, it does increase the size of the RDL. Click Next. On the Choose map visualization page, select Basic Map. We'll add data for visualization later. For now, we have just the outline of France to serve as the foundation layer for our map. Click Next, and then click Finish. Now click the color scale box in the lower left corner of the map, and press the Delete key to remove it. Then repeat to remove the distance scale box in the lower right corner of the map. Step 2: Add a Map Layer to an Existing Map The map data region allows you to add multiple layers. Each layer is associated with a different data set. Thus far, we have the spatial data that defines the regional boundaries in the first map layer. Now I'll add in another layer for the store locations by following these steps: If the Map Layers windows is not visible, click the report body, and then click twice anywhere on the map data region to display it. Click on the New Layer Wizard button in the Map layers window. And then we start over again with the process by choosing a spatial data source. Select SQL Server spatial query, and click Next. Select Add a new dataset with SQL Server spatial data, and click Next. Click New, add a connection string to the AdventureWorks2008R2 database, and click Next. Add a query with spatial data (like the one I included in the downloadable project), and click Next. The location data now appears as another layer on top of the regional map created earlier. Use the + button to resize the map again to fill as much of the viewport as possible without cutting off edges of the map. You might need to drag the map within the viewport to center it properly. Select Embed map data in this report, and click Next. On the Choose map visualization page, select Basic Marker Map, and click Next. On the Choose color theme and data visualization page, in the Marker drop-down list, change the marker to diamond. There's no particular reason for a diamond; I think it stands out a little better than a circle on this map. Clear the Single color map checkbox as another way to distinguish the markers from the map. You can of course create an analytical map instead, which would change the size and/or color of the markers according to criteria that you specify, such as sales volume of each store, but I'll save that exploration for another post on another day. Click Finish and then click Preview to see the rendered report. Et voilà...c'est fini. Yes, it's a very simple map at this point, but there are many other things you can do to enhance the map. I'll create a series of posts to explore the possibilities. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Robotic Arm &ndash; Hardware

    - by Szymon Kobalczyk
    This is first in series of articles about project I've been building  in my spare time since last Summer. Actually it all began when I was researching a topic of modeling human motion kinematics in order to create gesture recognition library for Kinect. This ties heavily into motion theory of robotic manipulators so I also glanced at some designs of robotic arms. Somehow I stumbled upon this cool looking open source robotic arm: It was featured on Thingiverse and published by user jjshortcut (Jan-Jaap). Since for some time I got hooked on toying with microcontrollers, robots and other electronics, I decided to give it a try and build it myself. In this post I will describe the hardware build of the arm and in later posts I will be writing about the software to control it. Another reason to build the arm myself was the cost factor. Even small commercial robotic arms are quite expensive – products from Lynxmotion and Dagu look great but both cost around USD $300 (actually there is one cheap arm available but it looks more like a toy to me). In comparison this design is quite cheap. It uses seven hobby grade servos and even the cheapest ones should work fine. The structure is build from a set of laser cut parts connected with few metal spacers (15mm and 47mm) and lots of M3 screws. Other than that you’d only need a microcontroller board to drive the servos. So in total it comes a lot cheaper to build it yourself than buy an of the shelf robotic arm. Oh, and if you don’t like this one there are few more robotic arm projects at Thingiverse (including one by oomlout). Laser cut parts Some time ago I’ve build another robot using laser cut parts so I knew the process already. You can grab the design files in both DXF and EPS format from Thingiverse, and there are also 3D models of each part in STL. Actually the design is split into a second project for the mini servo gripper (there is also a standard servo version available but it won’t fit this arm).  I wanted to make some small adjustments, layout, and add measurements to the parts before sending it for cutting. I’ve looked at some free 2D CAD programs, and finally did all this work using QCad 3 Beta with worked great for me (I also tried LibreCAD but it didn’t work that well). All parts are cut from 4 mm thick material. Because I was worried that acrylic is too fragile and might break, I also ordered another set cut from plywood. In the end I build it from plywood because it was easier to glue (I was told acrylic requires a special glue). Btw. I found a great laser cutter service in Kraków and highly recommend it (www.ebbox.com.pl). It cost me only USD $26 for both sets ($16 acrylic + $10 plywood). Metal parts I bought all the M3 screws and nuts at local hardware store. Make sure to look for nylon lock (nyloc) nuts for the gripper because otherwise it unscrews and comes apart quickly. I couldn’t find local store with metal spacers and had to order them online (you’d need 11 x 47mm and 3 x 15mm). I think I paid less than USD $10 for all metal parts. Servos This arm uses five standards size servos to drive the arm itself, and two micro servos are used on the gripper. Author of the project used Modelcraft RS-2 Servo and Modelcraft ES-05 HT Servo. I had two Futaba S3001 servos laying around, and ordered additional TowerPro SG-5010 standard size servos and TowerPro SG90 micro servos. However it turned out that the SG90 won’t fit in the gripper so I had to replace it with a slightly smaller E-Sky EK2-0508 micro servo. Later it also turned out that Futaba servos make some strange noise while working so I swapped one with TowerPro SG-5010 which has higher torque (8kg / cm). I’ve also bought three servo extension cables. All servos cost me USD $45. Assembly The build process is not difficult but you need to think carefully about order of assembling it. You can do the base and upper arm first. Because two servos in the base are close together you need to put first with one piece of lower arm already connected before you put the second servo. Then you connect the upper arm and finally put the second piece of lower arm to hold it together. Gripper and base require some gluing so think it through too. Make sure to look closely at all the photos on Thingiverse (also other people copies) and read additional posts on jjshortcust’s blog: My mini servo grippers and completed robotic arm  Multiply the robotic arm and electronics Here is also Rob’s copy cut from aluminum My assembled arm looks like this – I think it turned out really nice: Servo controller board The last piece of hardware I needed was an electronic board that would take command from PC and drive all seven servos. I could probably use Arduino for this task, and in fact there are several Arduino servo shields available (for example from Adafruit or Renbotics).  However one problem is that most support only up to six servos, and second that their accuracy is limited by Arduino’s timer frequency. So instead I looked for dedicated servo controller and found a series of Maestro boards from Pololu. I picked the Pololu Mini Maestro 12-Channel USB Servo Controller. It has many nice features including native USB connection, high resolution pulses (0.25µs) with no jitter, built-in speed and acceleration control, and even scripting capability. Another cool feature is that besides servo control, each channel can be configured as either general input or output. So far I’m using seven channels so I still have five available to connect some sensors (for example distance sensor mounted on gripper might be useful). And last but important factor was that they have SDK in .NET – what more I could wish for! The board itself is very small – half of the size of Tic-Tac box. I picked one for about USD $35 in this store. Perhaps another good alternative would be the Phidgets Advanced Servo 8-Motor – but it is significantly more expensive at USD $87.30. The Maestro Controller Driver and Software package includes Maestro Control Center program with lets you immediately configure the board. For each servo I first figured out their move range and set the min/max limits. I played with setting the speed an acceleration values as well. Big issue for me was that there are two servos that control position of lower arm (shoulder joint), and both have to be moved at the same time. This is where the scripting feature of Pololu board turned out very helpful. I wrote a script that synchronizes position of second servo with first one – so now I only need to move one servo and other will follow automatically. This turned out tricky because I couldn’t find simple offset mapping of the move range for each servo – I had to divide it into several sub-ranges and map each individually. The scripting language is bit assembler-like but gets the job done. And there is even a runtime debugging and stack view available. Altogether I’m very happy with the Pololu Mini Maestro Servo Controller, and with this final piece I completed the build and was able to move my arm from the Meastro Control program.   The total cost of my robotic arm was: $10 laser cut parts $10 metal parts $45 servos $35 servo controller ----------------------- $100 total So here you have all the information about the hardware. In next post I’ll start talking about the software that I wrote in Microsoft Robotics Developer Studio 4. Stay tuned!

    Read the article

  • External File Upload Optimizations for Windows Azure

    - by rgillen
    [Cross posted from here: http://rob.gillenfamily.net/post/External-File-Upload-Optimizations-for-Windows-Azure.aspx] I’m wrapping up a bit of the work we’ve been doing on data movement optimizations for cloud computing and the latest set of data yielded some interesting points I thought I’d share. The work done here is not really rocket science but may, in some ways, be slightly counter-intuitive and therefore seemed worthy of posting. Summary: for those who don’t like to read detailed posts or don’t have time, the synopsis is that if you are uploading data to Azure, block your data (even down to 1MB) and upload in parallel. Set your block size based on your source file size, but if you must choose a fixed value, use 1MB. Following the above will result in significant performance gains… upwards of 10x-24x and a reduction in overall file transfer time of upwards of 90% (eg, uploading a 1GB file averaged 46.37 minutes prior to optimizations and averaged 1.86 minutes afterwards). Detail: For those of you who want more detail, or think that the claims at the end of the preceding paragraph are over-reaching, what follows is information and code supporting these claims. As the title would indicate, these tests were run from our research facility pointing to the Azure cloud (specifically US North Central as it is physically closest to us) and do not represent intra-cloud results… we have performed intra-cloud tests and the overall results are similar in notion but the data rates are significantly different as well as the tipping points for the various block sizes… this will be detailed separately). We started by building a very simple console application that would loop through a directory and upload each file to Azure storage. This application used the shipping storage client library from the 1.1 version of the azure tools. The only real variation from the client library is that we added code to collect and record the duration (in ms) and size (in bytes) for each file transferred. The code is available here. We then created a directory that had a collection of files for the following sizes: 2KB, 32KB, 64KB, 128KB, 512KB, 1MB, 5MB, 10MB, 25MB, 50MB, 100MB, 250MB, 500MB, 750MB, and 1GB (50 files for each size listed). These files contained randomly-generated binary data and do not benefit from compression (a separate discussion topic). Our file generation tool is available here. The baseline was established by running the application described above against the directory containing all of the data files. This application uploads the files in a random order so as to avoid transferring all of the files of a given size sequentially and thereby spreading the affects of periodic Internet delays across the collection of results.  We then ran some scripts to split the resulting data and generate some reports. The raw data collected for our non-optimized tests is available via the links in the Related Resources section at the bottom of this post. For each file size, we calculated the average upload time (and standard deviation) and the average transfer rate (and standard deviation). As you likely are aware, transferring data across the Internet is susceptible to many transient delays which can cause anomalies in the resulting data. It is for this reason that we randomized the order of source file processing as well as executed the tests 50x for each file size. We expect that these steps will yield a sufficiently balanced set of results. Once the baseline was collected and analyzed, we updated the test harness application with some methods to split the source file into user-defined block sizes and then to upload those blocks in parallel (using the PutBlock() method of Azure storage). The parallelization was handled by simply relying on the Parallel Extensions to .NET to provide a Parallel.For loop (see linked source for specific implementation details in Program.cs, line 173 and following… less than 100 lines total). Once all of the blocks were uploaded, we called PutBlockList() to assemble/commit the file in Azure storage. For each block transferred, the MD5 was calculated and sent ensuring that the bits that arrived matched was was intended. The timer for the blocked/parallelized transfer method wraps the entire process (source file splitting, block transfer, MD5 validation, file committal). A diagram of the process is as follows: We then tested the affects of blocking & parallelizing the transfers by running the updated application against the same source set and did a parameter sweep on the block size including 256KB, 512KB, 1MB, 2MB, and 4MB (our assumption was that anything lower than 256KB wasn’t worth the trouble and 4MB is the maximum size of a block supported by Azure). The raw data for the parallel tests is available via the links in the Related Resources section at the bottom of this post. This data was processed and then compared against the single-threaded / non-optimized transfer numbers and the results were encouraging. The Excel version of the results is available here. Two semi-obvious points need to be made prior to reviewing the data. The first is that if the block size is larger than the source file size you will end up with a “negative optimization” due to the overhead of attempting to block and parallelize. The second is that as the files get smaller, the clock-time cost of blocking and parallelizing (overhead) is more apparent and can tend towards negative optimizations. For this reason (and is supported in the raw data provided in the linked worksheet) the charts and dialog below ignore source file sizes less than 1MB. (click chart for full size image) The chart above illustrates some interesting points about the results: When the block size is smaller than the source file, performance increases but as the block size approaches and then passes the source file size, you see decreasing benefit to the point of negative gains (see the values for the 1MB file size) For some of the moderately-sized source files, small blocks (256KB) are best As the size of the source file gets larger (see values for 50MB and up), the smallest block size is not the most efficient (presumably due, at least in part, to the increased number of blocks, increased number of individual transfer requests, and reassembly/committal costs). Once you pass the 250MB source file size, the difference in rate for 1MB to 4MB blocks is more-or-less constant The 1MB block size gives the best average improvement (~16x) but the optimal approach would be to vary the block size based on the size of the source file.    (click chart for full size image) The above is another view of the same data as the prior chart just with the axis changed (x-axis represents file size and plotted data shows improvement by block size). It again highlights the fact that the 1MB block size is probably the best overall size but highlights the benefits of some of the other block sizes at different source file sizes. This last chart shows the change in total duration of the file uploads based on different block sizes for the source file sizes. Nothing really new here other than this view of the data highlights the negative affects of poorly choosing a block size for smaller files.   Summary What we have found so far is that blocking your file uploads and uploading them in parallel results in significant performance improvements. Further, utilizing extension methods and the Task Parallel Library (.NET 4.0) make short work of altering the shipping client library to provide this functionality while minimizing the amount of change to existing applications that might be using the client library for other interactions.   Related Resources Source code for upload test application Source code for random file generator ODatas feed of raw data from non-optimized transfer tests Experiment Metadata Experiment Datasets 2KB Uploads 32KB Uploads 64KB Uploads 128KB Uploads 256KB Uploads 512KB Uploads 1MB Uploads 5MB Uploads 10MB Uploads 25MB Uploads 50MB Uploads 100MB Uploads 250MB Uploads 500MB Uploads 750MB Uploads 1GB Uploads Raw Data OData feeds of raw data from blocked/parallelized transfer tests Experiment Metadata Experiment Datasets Raw Data 256KB Blocks 512KB Blocks 1MB Blocks 2MB Blocks 4MB Blocks Excel worksheet showing summarizations and comparisons

    Read the article

  • Sorting the columns of an HTML table using JQuery

    - by nikolaosk
    In this post I will show you how easy is to sort the columns of an HTML table. I will use an external library,called Tablesorter which makes life so much easier for developers. ?here are other posts in my blog regarding JQuery.You can find them all here. You can find another post regarding HTML tables and JQuery here. We will demonstrate this with a step by step example. I will use Visual Studio 2012 Ultimate. You can also use Visual Studio 2012 Express Edition. You can also use VS 2010 editions.   1) Launch Visual Studio. Create an ASP.Net Empty Web application. Choose an appropriate name for your application. 2) Add a web form, default.aspx page to the application. 3) Add a table from the HTML controls tab control (from the Toolbox) on the default.aspx page 4) Now we need to download the JQuery library. Please visit the http://jquery.com/ and download the minified version.Then we need to download the Tablesorter JQuery plugin. Please donwload it, here. 5) We need to reference the JQuery library and the external JQuery Plugin. In the head section ? add the following lines.   <script src="jquery-1_8_2_min.js" type="text/javascript"></script>  <script src="jquery.tablesorter.js" type="text/javascript"></script>6) We need to type the HTML markup, the HTML table and its columns <body>    <form id="form1" runat="server">    <div>        <h1>Liverpool Legends</h1>        <table style="width: 50%;" border="1" cellpadding="10" cellspacing ="10" class="liverpool">            <thead>                <tr><th>Defenders</th><th>MidFielders</th><th>Strikers</th></tr>            </thead>            <tbody>            <tr>                <td>Alan Hansen</td>                <td>Graeme Souness</td>                <td>Ian Rush</td>            </tr>            <tr>                <td>Alan Kennedy</td>                <td>Steven Gerrard</td>                <td>Michael Owen</td>            </tr>            <tr>                <td>Jamie Garragher</td>                <td>Kenny Dalglish</td>                <td>Robbie Fowler</td>            </tr>            <tr>                <td>Rob Jones</td>                <td>Xabi Alonso</td>                <td>Dirk Kuyt</td>            </tr>                </tbody>        </table>            </div>    </form></body> 7) Inside the head section we also write the simple JQuery code.   <script type="text/javascript"> $(document).ready(function() { $('.liverpool').tablesorter(); }); </script> 8) Run your application.This is how the HTML table looks before the table is sorted on the basis of the selected column.   9) Now I will click on the Midfielders header.Have a look at the picture below  Tablesorter is an excellent JQuery plugin that makes sorting HTML tables a piece of cake. Hope it helps!!!

    Read the article

  • Hello Operator, My Switch Is Bored

    - by Paul White
    This is a post for T-SQL Tuesday #43 hosted by my good friend Rob Farley. The topic this month is Plan Operators. I haven’t taken part in T-SQL Tuesday before, but I do like to write about execution plans, so this seemed like a good time to start. This post is in two parts. The first part is primarily an excuse to use a pretty bad play on words in the title of this blog post (if you’re too young to know what a telephone operator or a switchboard is, I hate you). The second part of the post looks at an invisible query plan operator (so to speak). 1. My Switch Is Bored Allow me to present the rare and interesting execution plan operator, Switch: Books Online has this to say about Switch: Following that description, I had a go at producing a Fast Forward Cursor plan that used the TOP operator, but had no luck. That may be due to my lack of skill with cursors, I’m not too sure. The only application of Switch in SQL Server 2012 that I am familiar with requires a local partitioned view: CREATE TABLE dbo.T1 (c1 int NOT NULL CHECK (c1 BETWEEN 00 AND 24)); CREATE TABLE dbo.T2 (c1 int NOT NULL CHECK (c1 BETWEEN 25 AND 49)); CREATE TABLE dbo.T3 (c1 int NOT NULL CHECK (c1 BETWEEN 50 AND 74)); CREATE TABLE dbo.T4 (c1 int NOT NULL CHECK (c1 BETWEEN 75 AND 99)); GO CREATE VIEW V1 AS SELECT c1 FROM dbo.T1 UNION ALL SELECT c1 FROM dbo.T2 UNION ALL SELECT c1 FROM dbo.T3 UNION ALL SELECT c1 FROM dbo.T4; Not only that, but it needs an updatable local partitioned view. We’ll need some primary keys to meet that requirement: ALTER TABLE dbo.T1 ADD CONSTRAINT PK_T1 PRIMARY KEY (c1);   ALTER TABLE dbo.T2 ADD CONSTRAINT PK_T2 PRIMARY KEY (c1);   ALTER TABLE dbo.T3 ADD CONSTRAINT PK_T3 PRIMARY KEY (c1);   ALTER TABLE dbo.T4 ADD CONSTRAINT PK_T4 PRIMARY KEY (c1); We also need an INSERT statement that references the view. Even more specifically, to see a Switch operator, we need to perform a single-row insert (multi-row inserts use a different plan shape): INSERT dbo.V1 (c1) VALUES (1); And now…the execution plan: The Constant Scan manufactures a single row with no columns. The Compute Scalar works out which partition of the view the new value should go in. The Assert checks that the computed partition number is not null (if it is, an error is returned). The Nested Loops Join executes exactly once, with the partition id as an outer reference (correlated parameter). The Switch operator checks the value of the parameter and executes the corresponding input only. If the partition id is 0, the uppermost Clustered Index Insert is executed, adding a row to table T1. If the partition id is 1, the next lower Clustered Index Insert is executed, adding a row to table T2…and so on. In case you were wondering, here’s a query and execution plan for a multi-row insert to the view: INSERT dbo.V1 (c1) VALUES (1), (2); Yuck! An Eager Table Spool and four Filters! I prefer the Switch plan. My guess is that almost all the old strategies that used a Switch operator have been replaced over time, using things like a regular Concatenation Union All combined with Start-Up Filters on its inputs. Other new (relative to the Switch operator) features like table partitioning have specific execution plan support that doesn’t need the Switch operator either. This feels like a bit of a shame, but perhaps it is just nostalgia on my part, it’s hard to know. Please do let me know if you encounter a query that can still use the Switch operator in 2012 – it must be very bored if this is the only possible modern usage! 2. Invisible Plan Operators The second part of this post uses an example based on a question Dave Ballantyne asked using the SQL Sentry Plan Explorer plan upload facility. If you haven’t tried that yet, make sure you’re on the latest version of the (free) Plan Explorer software, and then click the Post to SQLPerformance.com button. That will create a site question with the query plan attached (which can be anonymized if the plan contains sensitive information). Aaron Bertrand and I keep a close eye on questions there, so if you have ever wanted to ask a query plan question of either of us, that’s a good way to do it. The problem The issue I want to talk about revolves around a query issued against a calendar table. The script below creates a simplified version and adds 100 years of per-day information to it: USE tempdb; GO CREATE TABLE dbo.Calendar ( dt date NOT NULL, isWeekday bit NOT NULL, theYear smallint NOT NULL,   CONSTRAINT PK__dbo_Calendar_dt PRIMARY KEY CLUSTERED (dt) ); GO -- Monday is the first day of the week for me SET DATEFIRST 1;   -- Add 100 years of data INSERT dbo.Calendar WITH (TABLOCKX) (dt, isWeekday, theYear) SELECT CA.dt, isWeekday = CASE WHEN DATEPART(WEEKDAY, CA.dt) IN (6, 7) THEN 0 ELSE 1 END, theYear = YEAR(CA.dt) FROM Sandpit.dbo.Numbers AS N CROSS APPLY ( VALUES (DATEADD(DAY, N.n - 1, CONVERT(date, '01 Jan 2000', 113))) ) AS CA (dt) WHERE N.n BETWEEN 1 AND 36525; The following query counts the number of weekend days in 2013: SELECT Days = COUNT_BIG(*) FROM dbo.Calendar AS C WHERE theYear = 2013 AND isWeekday = 0; It returns the correct result (104) using the following execution plan: The query optimizer has managed to estimate the number of rows returned from the table exactly, based purely on the default statistics created separately on the two columns referenced in the query’s WHERE clause. (Well, almost exactly, the unrounded estimate is 104.289 rows.) There is already an invisible operator in this query plan – a Filter operator used to apply the WHERE clause predicates. We can see it by re-running the query with the enormously useful (but undocumented) trace flag 9130 enabled: Now we can see the full picture. The whole table is scanned, returning all 36,525 rows, before the Filter narrows that down to just the 104 we want. Without the trace flag, the Filter is incorporated in the Clustered Index Scan as a residual predicate. It is a little bit more efficient than using a separate operator, but residual predicates are still something you will want to avoid where possible. The estimates are still spot on though: Anyway, looking to improve the performance of this query, Dave added the following filtered index to the Calendar table: CREATE NONCLUSTERED INDEX Weekends ON dbo.Calendar(theYear) WHERE isWeekday = 0; The original query now produces a much more efficient plan: Unfortunately, the estimated number of rows produced by the seek is now wrong (365 instead of 104): What’s going on? The estimate was spot on before we added the index! Explanation You might want to grab a coffee for this bit. Using another trace flag or two (8606 and 8612) we can see that the cardinality estimates were exactly right initially: The highlighted information shows the initial cardinality estimates for the base table (36,525 rows), the result of applying the two relational selects in our WHERE clause (104 rows), and after performing the COUNT_BIG(*) group by aggregate (1 row). All of these are correct, but that was before cost-based optimization got involved :) Cost-based optimization When cost-based optimization starts up, the logical tree above is copied into a structure (the ‘memo’) that has one group per logical operation (roughly speaking). The logical read of the base table (LogOp_Get) ends up in group 7; the two predicates (LogOp_Select) end up in group 8 (with the details of the selections in subgroups 0-6). These two groups still have the correct cardinalities as trace flag 8608 output (initial memo contents) shows: During cost-based optimization, a rule called SelToIdxStrategy runs on group 8. It’s job is to match logical selections to indexable expressions (SARGs). It successfully matches the selections (theYear = 2013, is Weekday = 0) to the filtered index, and writes a new alternative into the memo structure. The new alternative is entered into group 8 as option 1 (option 0 was the original LogOp_Select): The new alternative is to do nothing (PhyOp_NOP = no operation), but to instead follow the new logical instructions listed below the NOP. The LogOp_GetIdx (full read of an index) goes into group 21, and the LogOp_SelectIdx (selection on an index) is placed in group 22, operating on the result of group 21. The definition of the comparison ‘the Year = 2013’ (ScaOp_Comp downwards) was already present in the memo starting at group 2, so no new memo groups are created for that. New Cardinality Estimates The new memo groups require two new cardinality estimates to be derived. First, LogOp_Idx (full read of the index) gets a predicted cardinality of 10,436. This number comes from the filtered index statistics: DBCC SHOW_STATISTICS (Calendar, Weekends) WITH STAT_HEADER; The second new cardinality derivation is for the LogOp_SelectIdx applying the predicate (theYear = 2013). To get a number for this, the cardinality estimator uses statistics for the column ‘theYear’, producing an estimate of 365 rows (there are 365 days in 2013!): DBCC SHOW_STATISTICS (Calendar, theYear) WITH HISTOGRAM; This is where the mistake happens. Cardinality estimation should have used the filtered index statistics here, to get an estimate of 104 rows: DBCC SHOW_STATISTICS (Calendar, Weekends) WITH HISTOGRAM; Unfortunately, the logic has lost sight of the link between the read of the filtered index (LogOp_GetIdx) in group 22, and the selection on that index (LogOp_SelectIdx) that it is deriving a cardinality estimate for, in group 21. The correct cardinality estimate (104 rows) is still present in the memo, attached to group 8, but that group now has a PhyOp_NOP implementation. Skipping over the rest of cost-based optimization (in a belated attempt at brevity) we can see the optimizer’s final output using trace flag 8607: This output shows the (incorrect, but understandable) 365 row estimate for the index range operation, and the correct 104 estimate still attached to its PhyOp_NOP. This tree still has to go through a few post-optimizer rewrites and ‘copy out’ from the memo structure into a tree suitable for the execution engine. One step in this process removes PhyOp_NOP, discarding its 104-row cardinality estimate as it does so. To finish this section on a more positive note, consider what happens if we add an OVER clause to the query aggregate. This isn’t intended to be a ‘fix’ of any sort, I just want to show you that the 104 estimate can survive and be used if later cardinality estimation needs it: SELECT Days = COUNT_BIG(*) OVER () FROM dbo.Calendar AS C WHERE theYear = 2013 AND isWeekday = 0; The estimated execution plan is: Note the 365 estimate at the Index Seek, but the 104 lives again at the Segment! We can imagine the lost predicate ‘isWeekday = 0’ as sitting between the seek and the segment in an invisible Filter operator that drops the estimate from 365 to 104. Even though the NOP group is removed after optimization (so we don’t see it in the execution plan) bear in mind that all cost-based choices were made with the 104-row memo group present, so although things look a bit odd, it shouldn’t affect the optimizer’s plan selection. I should also mention that we can work around the estimation issue by including the index’s filtering columns in the index key: CREATE NONCLUSTERED INDEX Weekends ON dbo.Calendar(theYear, isWeekday) WHERE isWeekday = 0 WITH (DROP_EXISTING = ON); There are some downsides to doing this, including that changes to the isWeekday column may now require Halloween Protection, but that is unlikely to be a big problem for a static calendar table ;)  With the updated index in place, the original query produces an execution plan with the correct cardinality estimation showing at the Index Seek: That’s all for today, remember to let me know about any Switch plans you come across on a modern instance of SQL Server! Finally, here are some other posts of mine that cover other plan operators: Segment and Sequence Project Common Subexpression Spools Why Plan Operators Run Backwards Row Goals and the Top Operator Hash Match Flow Distinct Top N Sort Index Spools and Page Splits Singleton and Range Seeks Bitmaps Hash Join Performance Compute Scalar © 2013 Paul White – All Rights Reserved Twitter: @SQL_Kiwi

    Read the article

  • Craftsmanship is ALL that Matters

    - by Wayne Molina
    Today, I'm going to talk about a touchy subject: the notion of working in a company that doesn't use the prescribed "best practices" in its software development endeavours.  Over the years I have, using a variety of pseudonyms, asked this question on popular programming forums.  Although I always add in some minor variation of the story to avoid suspicion that it's the same person posting, the crux of the tale remains the same: A Programmer’s Tale A junior software developer has just started a new job at an average company, creating average line-of-business applications for internal use (the most typical scenario programmers find themselves in).  This hypothetical newbie has spent a lot of time reading up on the "theory" of software development, devouring books, blogs and screencasts from well-known and respected software developers in the community in order to broaden his knowledge and "do what the pros do".  He begins his new job, eager to apply what he's learned on a real-world project only to discover that his new teammates doesn't use any of those concepts and techniques.  They hack their way through development, or in a best-case scenario use some homebrew, thrown-together semblance of a framework for their applications that follows not one of the best practices suggested by the “elite” in the software community - things like TDD (TDD as a "best practice" is the only subjective part of this post, but it's included here due to a very large following of respected developers who consider it one), the SOLID principles, well-known and venerable tools, even version control in a worst case and truly nightmarish scenario.  Our protagonist is frustrated that he isn't doing things the "proper" way - a way he's spent personal time digesting and learning about and, more importantly, a way that some of the top developers in the industry advocate - and turns to a forum to ask the advice of his peers. Invariably the answer I, in the guise of the concerned newbie, will receive is that A) I don't know anything and should just shut my mouth and sling code the bad way like everybody else on the team, and B) These "best practices" are fade or a joke, and the only thing that matters is shipping software to your customers. I am here today to say that anyone who says this, or anything like it, is not only full of crap but indicative of exactly the type of “developer” that has helped to give our industry a bad name.  Here is why: One Who Knows Nothing, Understands Nothing On one hand, you have the cognoscenti of the .NET development world.  Guys like James Avery, Jeremy Miller, Ayende Rahien and Rob Conery; all well-respected and noted programmers that are pretty much our version of celebrities.  These guys write blogs, books, and post videos outlining the "correct" way of writing software to make sure it not only works but is maintainable and extensible and a joy to work with.  They tout the virtues of the SOLID principles, or of using TDD/BDD, or using a mature ORM like NHibernate, Subsonic or even Entity Framework. On the other hand, you have Joe Everyman, Lead Software Developer at Initrode Corporation - in our hypothetical story Joe is the junior developer's new boss.  Joe's been with Initrode for 10 years, starting as the company’s very first programmer and over the years building up a little fiefdom of his own until at the present he’s in charge of all Initrode’s software development.  Joe writes code the same way he always has, without bothering to learn much, if anything.  He looked at NHibernate once and found it was "too hard", so he uses a primitive implementation of the TableDataGateway pattern as a wrapper around SqlClient.SqlConnection and SqlClient.SqlCommand instead of an actual ORM (or, in a better case scenario, has created his own ORM); the thought of using LINQ or Entity Framework or really anything other than his own hastily homebrew solution has never occurred to him.  He doesn't understand TDD and considers “testing” to be using the .NET debugger to step through code, or simply loading up an app and entering some values to see if it works.  He doesn't really understand SOLID, and he doesn't care to.  He's worked as a programmer for years, and that's all that counts.  Right?  WRONG. Who would you rather trust?  Someone with years of experience and who writes books, creates well-known software and is akin to a celebrity, or someone with no credibility outside their own minute environment who throws around their clout and company seniority as the "proof" of their ability?  Joe Everyman may have years of experience at Initrode as a programmer, and says to do things "his way" but someone like Jeremy Miller or Ayende Rahien have years of experience at companies just like Initrode, THEY know ten times more than Joe Everyman knows or could ever hope to know, and THEY say to do things "this way". Here's another way of thinking about it: If you wanted to get into politics and needed advice on the best way to do it, would you rather listen to the mayor of Hicktown, USA or Barack Obama?  One is a small-time nobody while the other is very well-known and, as such, would probably have much more accurate and beneficial advice. NOTE: The selection of Barack Obama as an example in no way, shape, or form suggests a political affiliation or political bent to this post or blog, and no political innuendo should be mistakenly read from it; the intent was merely to compare a small-time persona with a well-known persona in a non-software field.  Feel free to replace the name "Barack Obama" with any well-known Congressman, Senator or US President of your choice. DIY Considered Harmful I will say right now that the homebrew development environment is the WORST one for an aspiring programmer, because it relies on nothing outside it's own little box - no useful skill outside of the small pond.  If you are forced to use some half-baked, homebrew ORM created by your Director of Software, you are not learning anything valuable you can take with you in the future; now, if you plan to stay at Initrode for 10 years like Joe Everyman, this is fine and dandy.  However if, like most of us, you want to advance your career outside a very narrow space you will do more harm than good by sticking it out in an environment where you, to be frank, know better than everybody else because you are aware of alternative and, in almost most cases, better tools for the job.  A junior developer who understands why the SOLID principles are good to follow, or why TDD is beneficial, or who knows that it's better to use NHibernate/Subsonic/EF/LINQ/well-known ORM versus some in-house one knows better than a senior developer with 20 years experience who doesn't understand any of that, plain and simple.  Anyone who disagrees is either a liar, or someone who, just like Joe Everyman, Lead Developer, relies on seniority and tenure rather than adapting their knowledge as things evolve. In many cases, the Joe Everymans of the world act this way out of fear - they cannot possibly fathom that a “junior” could know more than them; after all, they’ve spent 10 or more years in the same company, doing the same job, cranking out the same shoddy software.  And here comes a newbie who hasn’t spent 10+ years doing the same things, with a fresh and often radical take on the craft, and Joe Everyman is afraid he might have to put some real effort into his career again instead of just pointing to his 10 years of service at Initrode as “proof” that he’s good, or that he might have to learn something new to improve; in most cases the problem is Joe Everyman, and by extension Initrode itself, has a mentality of just being “good enough”, and mediocrity is the rule of the day. A Thorn Bush is No Place for a Phoenix My advice is that if you work on a team where they don't use the best practices that some of the most famous developers in our field say is the "right" way to do things (and have legions of people who agree), and YOU are aware of these practices and can see why they work, then LEAVE the company.  Find a company where they DO care about quality, and craftsmanship, otherwise you will never be happy.  There is no point in "dumbing" yourself down to the level of your co-workers and slinging code without care to craftsmanship.  In 95% of these situations there will be no point in bringing it to the attention of Joe Everyman because he won't listen; he might even get upset that someone is trying to "upstage" him and fire the newbie, and replace someone with loads of untapped potential with a drone that will just nod affirmatively and grind out the tasks assigned without question. Find a company that has people smart enough to listen to the "best and brightest", and be happy.  Do not, I repeat, DO NOT waste away in a job working for ignorant people.  At the end of the day software development IS a craft, and a level of craftsmanship is REQUIRED for any serious professional.  When you have knowledgeable people with the credibility to back it up saying one thing, and small-time people who are, to put it bluntly, nobodies in the field saying and doing something totally different because they can't comprehend it, leave the nobodies to their own devices to fade into obscurity.  Work for a company that uses REAL software engineering techniques and really cares about craftsmanship.  The biggest issue affecting our career, and the reason software development has never been the respected, white-collar career it was meant to be, is because hacks and charlatans can pass themselves off as professional programmers without following a lick of good advice from programmers much better at the craft than they are.  These modern day snake-oil salesmen entrench themselves in companies by hoodwinking non-technical businesspeople and customers with their shoddy wares, end up in senior/lead/executive positions, and push their lack of knowledge on everybody unfortunate enough to work with/for/under them, crushing any dissent or voices of reason and change under their tyrannical heel and leaving behind a trail of dismayed and, often, unemployed junior developers who were made examples of to keep up the facade and avoid the shadow of doubt being cast upon them. To sum this up another way: If you surround yourself with learned people, you will learn.  Surround yourself with ignorant people who can't, as the saying goes, see the forest through the trees, and you'll learn nothing of any real value.  There is more to software development than just writing code, and the end goal should not be just "shipping software", it should be shipping software that is extensible, maintainable, and above all else software whose creation has broadened your knowledge in some capacity, even if a minor one.  An eager newbie who knows theory and thirsts for knowledge can easily be moulded and taught the advanced topics, but the same can't be said of someone who only cares about the finish line.  This industry needs more people espousing the benefits of software craftsmanship and proper software engineering techniques, and less Joe Everymans who are unwilling to adapt or foster new ways of thinking. Conclusion - I Cast “Protection from Fire” I am fairly certain this post will spark some controversy and might even invite the flames.  Please keep in mind these are opinions and nothing more.  A little healthy rant and subsequent flamewar can be good for the soul once in a while.  To paraphrase The Godfather: It helps to get rid of the bad blood.

    Read the article

  • CodePlex Daily Summary for Tuesday, April 03, 2012

    CodePlex Daily Summary for Tuesday, April 03, 2012Popular ReleasesWiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.Lightbox Gallery Module for DotNetNuke: 01.11.00: This version of the Lightbox Gallery Module adds the following features/bug fixes: Feature: Read image EXIF information Bug Fix: URL parsing bug for any folder provider Minimum System Requirements Please ensure that your environment meets or exceeds the following system requirements: DotNetNuke® Version 06.00.00 or higher SQL Server 2005 or later .Net Framework 3.5 SP1 or laterClosedXML - The easy way to OpenXML: ClosedXML 0.65.0: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks)callisto: callisto 2.0.24: Implemented ares encryption protocol for supported clients. Also changed script loading method to read direct from source files.sb0t: sb0t 4.61: Added packet encryption protocol for supported clients.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryExtAspNet: ExtAspNet v3.1.1: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://extasp.net/ ??:http://bbs.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-04-02 v3.1.1 +????????,?????????????,????????????(...Document.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.Pcap.Net: Pcap.Net 0.9.0 (66492): Pcap.Net - March 2012 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes a packet interpretation framework. Version 0.9.0 (Change Set 66492)March 31, 2012 release of the Pcap.Net framework. Follow Pcap.Net on Google+Follow Pcap.Net on Google+ Files Pcap.Net.DevelopersPack.0.9.0.66492.zip - Includes all the tutorial example projects source files, the binaries in a 3rdParty directory and the documentation. It include...Extended WPF Toolkit: Extended WPF Toolkit - 1.6.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's in the 1.6.0 Release?BusyIndicator ButtonSpinner Calculator CalculatorUpDown CheckListBox - Breaking Changes CheckComboBox - New Control ChildWindow CollectionEditor CollectionEditorDialog ColorCanvas ColorPicker DateTimePicker DateTimeUpDown DecimalUpDown DoubleUpDown DropDownButton IntegerUpDown Magnifier MaskedTextBox MessageBox MultiLineTex...Media Companion: MC 3.434b Release: General This release should be the last beta for 3.4xx. If there are no major problems, by the end of the week it will upgraded to 3.500 Stable! The latest mc_com.exe should be included too! TV Bug fix - crash when using XBMC scraper for TV episodes. Bug fix - episode count update when adding new episodes. Bug fix - crash when actors name was missing. Enhanced TV scrape progress text. Enhancements made to missing episodes display. Movies Bug fix - hide "Play Trailer" when multisaev...Better Explorer: Better Explorer 2.0.0.831 Alpha: - A new release with: - many bugfixes - changed icon - added code for more failsafe registry usage on x64 systems - not needed regfix anymore - added ribbon shortcut keys - Other fixes Note: If you have problems opening system libraries, a suggestion was given to copy all of these libraries and then delete the originals. Thanks to Gaugamela for that! (see discussion here: 349015 ) Note2: I was upload again the setup due to missing file!MonoGame - Write Once, Play Everywhere: MonoGame 2.5: The MonoGame team are pleased to announce that MonoGame v2.5 has been released. This release contains important bug fixes, implements optimisations and adds key features. MonoGame now has the capability to use OpenGLES 2.0 on Android and iOS devices, meaning it now supports custom shaders across mobile and desktop platforms. Also included in this release are native orientation animations on iOS devices and better Orientation support for Android. There have also been a lot of bug fixes since t...Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesUmbraco CMS: Umbraco 5.1 CMS (Beta): Beta build for testing - please report issues at issues.umbraco.org (Latest uploaded: 5.1.0.123) What's new in 5.1? The full list of changes is on our http://progress.umbraco.org task tracking page. It shows items complete for 5.1, and 5.1 includes items for 5.0.1 and 5.0.2 listed there too. Here's two headline acts: Members5.1 adds support for backoffice editing of Members. We support the pairing up of our content type system in Hive with regular ASP.NET Membership providers (we ship a def...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.2.11: One Click Install from NuGet Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla Public Licence 2. 2. User interface control and associated data access layer classes have been added to aid developers integrating 51Degrees.mobi into wider projects such as content management systems or web hosting management solutions. Use the following in a web form or user control to access these new UI components. <%@ Register Assembly="FiftyOne.Foundation" Namespace="...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 New Projects3DTweet: 3Dtweet is an effort to make tweets appear in a aesthetic manner to the users of windows phone.Its developed using VS2010 expresss.Alay Plugin for Windows Live Writer: a project for creating an alay languageAuthor-it Copy Folder Plug-in: The Copy Folder Plug-in is an Author-it plug-in that allows the user to create a duplicate of a folder and its contents, including subfolders and objects.Author-it Dependencies Plug-in: The Word Count Plug-in is an Author-it plug-in that allows the user to drill down into object relationships to find objects that selected Author-it objects depend on.Author-it Word Count Plug-in: The Word Count Plug-in is an Author-it plug-in that allows the user to get word counts for selected topics.Azure Configuration File Comparer: Compares two Azure configuration files and highlights the differencesBootstrap Footer Sticker: Bootstrap extensions for footer to stick at the bottomBulk Approval Webpart: This webpart can be added to any list, or document library that requires approval. When the button is clicked it will approve all items. It will also kick start any workflows attached to the list / library that are set to start when an item has been changed. CodeTimer: Code Execute TimeCRM 2011 - WinForm based User Settings Console: This is Windows Form based Utility to do bulk management of User Settings in CRM 2011Emergency System: An Imagine Cup projectFalafel Solution Rename Script: The Falafel Software Solution Rename PowerShell Script makes it easy to reuse an existing solution/project by performing a global rename. If you have a solution named ExampleSolution and want to reuse it as WidgetSolution, this script will rename everything for you.Gadgeteer Bluetooth Module: BETA Drivers for the .NET Gadgeteer Bluetooth modulesGreg's Channel 9 Utilities and Helpers: Utilities and helpers for Microsoft's Channel 9 (C9) site. These are utilities I've created to make my C9 work faster and easierHB's First Time: My first project hereHOMMFrame: Studying project about frames.ICNInformaticaCenter: * ICNInformaticaCenter *Insert a Favorite (Bookmark) plugin for Windows Live Writer: This Windows Live Writer plugin allows you to select a Favorite (Bookmark) and insert it into your blog entry.Kinect your Metro Style App: The main idea is to tell Metro Style App communicate with external environment via Kinect Sensor.Memo: Memo Intellegence SystemMGR.CommandLineParser: MGR.CommandLineParser is a multi-command line parser. It uses System.ComponentModel.DataAnnotations to declare and validate the commands.MusicStoreMVC3: ?????MVC3??????????,????????(???????)??? 1.EF4.1 2.MVC3 3.MvcPager 4.Linq ?????? NN Crew Calculator: Calculator project to help learn C#Reporte Ciudadano: Aplicación para que los ciudadanos reporten los problemas al ayuntamiento.Sejrssedler: This is a school project made, by four student in Aarhus, Denmark. During the Datamatiker study(2nd year).smartcamera: smart cameraSpecEx: Speculative ExecutionStructure Copier: This small program is supposed to copy tree structure of directory.TFS2010 Service Provider: Web Service (asmx) is a provider of Team Foundation Server 2010 object model. Was developed to enable the implementation of client application for Android and etc. platforms, which receives data from the server via Web services.totalem: totalem - free file manager for WindowsWebSharperWithTypeProviders: WebSharper project with Visual Studio 2011 Beta, .Net 4.5 and F# 3.0 with TypeProviders

    Read the article

< Previous Page | 49 50 51 52 53 54 55  | Next Page >