Search Results

Search found 16604 results on 665 pages for 'jd long'.

Page 530/665 | < Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >

• How Would a Newborn Baby Learn Web Programming?

  - by Mugatu

  Hello all, I chose that title because I equate my knowledge of web programming and web development with that of a newborn. Here's the shortest version of my story and what I'm looking to do: A friend and I have been coming up with website ideas for a couple years, mostly just jotting them down whenever we come up with a good, useful idea when browsing the web. For the past 6 months we've hired a couple different programmers to make a couple of the sites for us, but have been disappointed with how it's gone. Been too slow and too many miscommunications for our liking. So like the saying goes if you want something done right do it yourself, we're going to do it ourselves. I know nothing about programming, I've never written a line of code in my life. I consider myself very good with math and about as logical as you can get, but I have zero real-life programming knowledge. The sites we want to make are all pretty 'Web 2.0'ish', meaning user-generated content, commenting on posts, pages that change on the fly, etc. So here are some of my questions for anyone who's been there before: Is there a language you'd recommend learning first? Something that is a good indicator how most other languages work? What web programming languages do you recommend learning first based on popularity both now and the future. I don't want to learn a language that's going to be outdated by the time I'm an expert at it. Any specific books you'd recommend? Any general advice you'd give to someone literally starting at square zero for coding who plans on being in it for the long haul? Thanks in advance for the help

  Read the article

• Generic ASP.NET MVC Route Conflict

  - by Donn Felker

  I'm working on a Legacy ASP.NET system. I say legacy because there are NO tests around 90% of the system. I'm trying to fix the routes in this project and I'm running into a issue I wish to solve with generic routes. I have the following routes: routes.MapRoute( "DefaultWithPdn", "{controller}/{action}/{pdn}", new { controller = "", action = "Index", pdn = "" }, null ); routes.MapRoute( "DefaultWithClientId", "{controller}/{action}/{clientId}", new { controller = "", action = "index", clientid = "" }, null ); The problem is that the first route is catching all of the traffic for what I need to be routed to the second route. The route is generic (no controller is defined in the constraint in either route definition) because multiple controllers throughout the entire app share this same premise (sometimes we need a "pdn" sometimes we need a "clientId"). How can I map these generic routes so that they go to the proper controller and action, yet not have one be too greedy? Or can I at all? Are these routes too generic (which is what I'm starting to believe is the case). My only option at this point (AFAIK) is one of the following: In the contraints, apply a regex to match the action values like: (foo|bar|biz|bang) and the same for the controller: (home|customer|products) for each controller. However, this has a problem in the fact that I may need to do this: ~/Foo/Home/123 // Should map to "DefaultwithPdn" ~/Foo/Home/abc // Should map to "DefaultWithClientId" Which means that if the Foo Controller has an action that takes a pdn and another action that takes a clientId (which happens all the time in this app), the wrong route is chosen. To hardcode these contstraints into each possible controller/action combo seems like a lot of duplication to me and I have the feeling I've been looking at the problem for too long so I need another pair of eyes to help out. Can I have generic routes to handle this scenario? Or do I need to have custom routes for each controller with constraints applied to the actions on those routes? Thanks

  Read the article

• How to find an embedded platform?

  - by gmagana

  I am new to the locating hardware side of embedded programming and so after being completely overwhelmed with all the choices out there (pc104, custom boards, a zillion option for each board, volume discounts, devel kits, ahhh!!) I am asking here for some direction. Basically, I must find a new motherboard and (most likely) re-implement the program logic. Rewriting this in C/C++/Java/C#/Pascal/BASIC is not a problem for me. so my real problem is finding the hardware. This motherboard will have several other devices attached to it. Here is a summary of what I need to do: Required: 2 RS232 serial ports (one used all the time for primary UI, the second one not continuous) 1 modem (9600+ baud ok) [Modem will be in simultaneous use with only one of the serial port devices, so interrupt sharing with one serial port is OK, but not both] Minimum permanent/long term storage: Whatever O/S requires + 1 MB (executable) + 512 KB (Data files) RAM: Minimal, whatever the O/S requires plus maybe 1MB for executable. Nice to have: USB port(s) Ethernet network port Wireless network Implementation languages (any O/S I will adapt to): First choice Java/C# (Mono ok) Second choice is C/Pascal Third is BASIC Ok, given all this, I am having a lot of trouble finding hardware that will support this that is low in cost. Every manufacturer site I visit has a lot of options, and it's difficult to see if their offering will even satisfy my must-have requirements (for example they sometimes list 3 "serial ports", but it appears that only one of the three is RS232, for example, and don't mention what the other two are). The #1 constraint is cost, #2 is size. Can anyone help me with this? This little task has left me thinking I should have gone for EE and not CS :-). EDIT: A bit of background: This is a system currently in production, but the original programmer passed away, and the current hardware manufacturer cannot find hardware to run the (currently) DOS system, so I need to reimplement this in a modern platform. I can only change the programming and the motherboard hardware.

  Read the article

• Navigating through code with keyboard shortcuts

  - by MarceloRamires

  I'm starting to feel the need to run fastly through code with keyboard shortcuts, to arrive faster where I want to make any changes (avoiding use of mouse or long times holding [up], [left], [right] and [down]). I'm already using some: [home] - first position in current line [end] - last position in current line [ctrl] + [home] - first line of the entire code [ctrl] + [end] - last line of the entire code [pageup] - same vertical position, one screen above [pagedown] - same vertical position, one screen below [ctrl] + [pageup] - first line in current screen [ctrl] + [end] - last line in current screen [ctrl] + [left/right] - skipping word per word What have you got ? I use Visual Studio. (but I'm open to any answer, as I maybe can use others soon) obs: I've searched through stackoverflow and didn't find a nice question with this content, nor a list of keyboard code searching. If it's repeated, I'm sorry for not finding it, I'm here in my best intentions. This question is NOT about any shortcuts, and not only about visual studio, it's about running through code with shortcuts. Answers that suit the question so far: [Ctrl] + [-] - jumps to last cursor position [Ctrl] + [F3] - Jumps to next occurance of the word the curson is in [Shift] + [F3] - Same as the above, backwards. [F12] - Goes to definition of method/variable the cursor is in [Ctrl] + [ ] ] - Jumps to matching brace and select I'll ad more as there are answers.

  Read the article

• TEXTAREAs scroll by themselves (on IE8) every time you type one character

  - by Justin Grant

  IE8 has a known bug (per connect.microsoft.com) where typing or pasting text into a TEXTAREA element will cause the textarea to scroll by itself. This is hugely annoying and shows up in many community sites, including Wikipedia. The repro is this: open the HTML below with IE8 (or use any long page on wikipedia which will exhibit the same problem until they fix it) size the browser full-screen paste a few pages of text into the TEXTAREA move the scrollbar to the middle position now type one character into the textarea Expected: nothing happens Actual: scrossing happens on its own, and the insertion point ends up near the bottom of the textarea! Below is repro HTML (can also see this live on the web here: http://en.wikipedia.org/w/index.php?title=Text_box&action=edit) <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <body> <div style="width: 80%"> <textarea rows="20" cols="80" style="width:100%;" ></textarea> </div> </body> </html>

  Read the article

• Stupid newbie c++ two-dimensional array problem.

  - by paulson scott

  I've no idea if this is too newbie or generic for stackoverlflow. Apologies if that's the case, I don't intend to waste time. I've just started working through C++ Primer Plus and I've hit a little stump. This is probably super laughable but: for (int year = 0; year < YEARS; year++) { cout << "Year " << year + 1 << ":"; for (int month = 0; month < MONTHS; month++) { absoluteTotal = (yearlyTotal[year][year] += sales[year][month]); } cout << yearlyTotal[year][year] << endl; } cout << "The total number of books sold over a period of " << YEARS << " years is: " << absoluteTotal << endl; I wish to display the total of all 3 years. The rest of the code works fine: input is fine, individual yearly output is fine but I just can't get 3 years added together for one final total. I did have the total working at one point but I didn't have the individual totals working. I messed with it and reversed the situation. I've been messing with it for God knows how long. Any idea guys? Sorry if this isn't the place!

  Read the article

• Django: How can I identify the calling view from a template?

  - by bryan

  Short version: Is there a simple, built-in way to identify the calling view in a Django template, without passing extra context variables? Long (original) version: One of my Django apps has several different views, each with its own named URL pattern, that all render the same template. There's a very small amount of template code that needs to change depending on the called view, too small to be worth the overhead of setting up separate templates for each view, so ideally I need to find a way to identify the calling view in the template. I've tried setting up the views to pass in extra context variables (e.g. "view_name") to identify the calling view, and I've also tried using {% ifequal request.path "/some/path/" %} comparisons, but neither of these solutions seems particularly elegant. Is there a better way to identify the calling view from the template? Is there a way to access to the view's name, or the name of the URL pattern? Update 1: Regarding the comment that this is simply a case of me misunderstanding MVC, I understand MVC, but Django's not really an MVC framework. I believe the way my app is set up is consistent with Django's take on MVC: the views describe which data is presented, and the templates describe how the data is presented. It just happens that I have a number of views that prepare different data, but that all use the same template because the data is presented the same way for all the views. I'm just looking for a simple way to identify the calling view from the template, if this exists. Update 2: Thanks for all the answers. I think the question is being overthought -- as mentioned in my original question, I've already considered and tried all of the suggested solutions -- so I've distilled it down to a "short version" now at the top of the question. And right now it seems that if someone were to simply post "No", it'd be the most correct answer :) Update 3: Carl Meyer posted "No" :) Thanks again, everyone.

  Read the article

• No Buffer Space available(maximum connection reached?) Form Postgres EDB Driver

  - by Listening.Platform

  We are facing an exception while connecting to database through our java application. The stack trace is as follows com.edb.util.PSQLException: The connection attempt failed. at com.edb.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:189) at com.edb.core.ConnectionFactory.openConnection(ConnectionFactory.java:64) at com.edb.jdbc2.AbstractJdbc2Connection.<init>(AbstractJdbc2Connection.java:161) at com.edb.jdbc3.AbstractJdbc3Connection.<init>(AbstractJdbc3Connection.java:30) at com.edb.jdbc3.Jdbc3Connection.<init>(Jdbc3Connection.java:24) at com.edb.Driver.makeConnection(Driver.java:391) at com.edb.Driver.connect(Driver.java:266) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) ... 12 more Caused by: java.net.SocketException: No buffer space available (maximum connections reached?): connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(Unknown Source) at java.net.PlainSocketImpl.connectToAddress(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.<init>(Unknown Source) at java.net.Socket.<init>(Unknown Source) at com.edb.core.PGStream.<init>(PGStream.java:70) at com.edb.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:115) ... 20 more When the error occured we were not able to connect to internet and DB and had to reboot the system. But the error occured again after 3 days at same code i.e while connecting to DB. We checked TCP connections using netstat. But there were not many TCP connections i.e it has not reached the max limit. Our application has multiple long running Java processes that pools the DB connections (not more than 60) and keeps it alive for firing the next query (as it has to poll the DB every 2 seconds). Some of the queries in our application are joining large tables (10 million records) to get the related data. We are using following System and applications Windows 2003 server SP2 Java 1.6 Postgres Plus Advanced server 8.4 Database edb-jdbc14.jar driver for connection DB from Java We have used the default configuration of Postgres DB except increasing the connection to 120 from 100. Has anybody encountred the same error with postgres edb driver? Can anybody help us finding the solution?

  Read the article

• Two Problems I'm having with UIButton and UIView.

  - by Andy

  Hi all, I haven't been programming on the iPhone for very long, but I'm picking it up slowly by googling problems I get. Unfortunately I haven't been able to find an answer for these. I have started a new View-based application in Xcode 3.2.2 and immediately added the following files: myUIView.m and myUIView.h, which are subclasses of UIView. In Interface Builder, I set the subclass of the default UIView to be myUIView. I made a button in the drawRect method. Problem one: The title of the button only appears AFTER I click the screen, why? Problem two: I want the button to produce the modalview - is this possible? The code is as follow: #import "myUIView.h" @implementation myUIView - (void)drawRect:(CGRect)rect { // Drawing code button = [UIButton buttonWithType:UIButtonTypeRoundedRect]; button.frame = CGRectMake(0,0,100,100); [button setTitle:@"butty" forState:UIControlStateNormal]; [button addTarget:self action:@selector(buttonPressed:) forControlEvents:UIControlEventTouchUpInside]; [self addSubview:button]; } -(void)buttonPressed:(id)sender{ NSLog(@"Button pressed"); //present modal view somehow..? } I can't see how to post attachments, but if anyone thinks it will help I can upload the source. Many thanks, Andy

  Read the article

• Encapsulating user input of data for a class (C++)

  - by Dr. Monkey

  For an assignment I've made a simple C++ program that uses a superclass (Student) and two subclasses (CourseStudent and ResearchStudent) to store a list of students and print out their details, with different details shown for the two different types of students (using overriding of the display() method from Student). My question is about how the program collects input from the user of things like the student name, ID number, unit and fee information (for a course student) and research information (for research students): My implementation has the prompting for user input and the collecting of that input handled within the classes themselves. The reasoning behind this was that each class knows what kind of input it needs, so it makes sense to me to have it know how to ask for it (given an ostream through which to ask and an istream to collect the input from). My lecturer says that the prompting and input should all be handled in the main program, which seems to me somewhat messier, and would make it trickier to extend the program to handle different types of students. I am considering, as a compromise, to make a helper class that handles the prompting and collection of user input for each type of Student, which could then be called on by the main program. The advantage of this would be that the student classes don't have as much in them (so they're cleaner), but also they can be bundled with the helper classes if the input functionality is required. This also means more classes of Student could be added without having to make major changes to the main program, as long as helper classes are provided for these new classes. Also the helper class could be swapped for an alternative language version without having to make any changes to the class itself. What are the major advantages and disadvantages of the three different options for user input (fully encapsulated, helper class or in the main program)?

  Read the article

• protocol parsing in c

  - by nomad.alien

  I have been playing around with trying to implement some protocol decoders, but each time I run into a "simple" problem and I feel the way I am solving the problem is not optimal and there must be a better way to do things. I'm using C. Currently I'm using some canned data and reading it in as a file, but later on it would be via TCP or UDP. Here's the problem. I'm currently playing with a binary protocol at work. All fields are 8 bits long. The first field(8bits) is the packet type. So I read in the first 8 bits and using a switch/case I call a function to read in the rest of the packet as I then know the size/structure of it. BUT...some of these packets have nested packets inside them, so when I encounter that specific packet I then have to read another 8-16 bytes have another switch/case to see what the next packet type is and on and on. (Luckily the packets are only nested 2 or 3 deep). Only once I have the whole packet decoded can I handle it over to my state machine for processing. I guess this can be a more general question as well. How much data do you have to read at a time from the socket? As much as possible? As much as what is "similar" in the protocol headers? So even though this protocol is fairly basic, my code is a whole bunch of switch/case statements and I do a lot of reading from the file/socket which I feel is not optimal. My main aim is to make this decoder as fast as possible. To the more experienced people out there, is this the way to go or is there a better way which I just haven't figured out yet? Any elegant solution to this problem?

  Read the article

• Undefined Web.config error in VS 2008

  - by user1066050

  I'm working on a web app using VS 2008, .Net 3.5 and C#. Most of the projects in the solution are either classic asp.net pages with some MVC 1 in the mix, the rest is shared libraries. The solution is one that is some 5 years old and has gone through a variety of developers working on it and clearly has some performance and architectural issues. Previously, I've been working on the project using VS 2008 on a Win XP machine, but have just transitioned over to a new box using Win 7 Ultimate. To do so, I've installed VS 2008, asp.net 3.5. To support future work on the solution I've also installed VS 2010 and asp.net 4.0. Opening the solution on the new box with VS 2008 works fine, and it builds without error. However, when I attempt to run it with the debugger, I get the following message: "There is an error in web.config. Please correct before proceeding. (You might rename the current web.config and add a new one.)" I think it's clear that there is some sort of environmental issue regarding web.config on the new machine, but the error message is not "helpful". Adding a new web.config is not an option as the existing one is quite long and involved (too much to post here). I'm hoping someone has a suggestion or two about where I might look for missing elements or changed configurations that might produce such an error message. Lacking that, I'll revisit this post and provide the web.config in the hope that will elicit further help. Thanks to all in advance for taking a look at this. The StackOverflow community has helped me many times in the past with pertinent answers although this is my first posting. Jeff

  Read the article

• Where can a self-teacher learn general good programming habits and conventions?

  - by lucid

  A few mistakes and general childishness in early adulthood have left me in a situation where I work a menial job, with no possibility (in the near future) of attending school. I aspire to one day work in the programming field (gaming specifically), after proving myself on the indie end of things. I've gotten very confident in C++, java, and python, and I find I'm able to solve any problem I want either from previous experience, or from scouring the web for help. The solutions work, and with each attempt they become more readable, maintainable, and extensible. But this is because I'm learning from mistakes and bad programming and design habits I feel I might have avoided with actual schooling. General tips like: "if it's hard to read or getting long, or you're writing it twice, it should be in one or more functions." or "design all your classes before you start coding, so you don't have to rewrite classes later when you discover an unforeseen dependency" Is there a good book or website for learning general good programming practices and design habits? Also, naming and format conventions. I realize sometimes development houses have their own conventions, but things like "Classes in python usually have the first letter of each word capitalized". I'd like to be able to show some source code to a potential employer, and be prepared when for what's expected on a team. Is there some central database of naming and formatting conventions somewhere? Also, feel free to give any thoughts on whether or not the self-teach, garner some indie sales, use them as your resume' route is realistic

  Read the article

• garbage collector Issue

  - by Eslam

  this question is like my previous one Given: 3. interface Animal { void makeNoise(); } 4. class Horse implements Animal { 5. Long weight = 1200L; 6. public void makeNoise() { System.out.println("whinny"); } 7. } 8. public class Icelandic extends Horse { 9. public void makeNoise() { System.out.println("vinny"); } 10. public static void main(String[] args) { 11. Icelandic i1 = new Icelandic(); 12. Icelandic i2 = new Icelandic(); 13. Icelandic i3 = new Icelandic(); 14. i3 = i1; i1 = i2; i2 = null; i3 = i1; 15. } 16. } When line 14 is reached, how many objects are eligible for the garbage collector? A. 0 B. 1 C. 2 D. 3 E. 4 F. 6 i choosed A but the right answer is E, but i don't know Why?

  Read the article

• Android - Basic CRUD (REST/RPC client) to remote server

  - by bsreekanth

  There are lot of discussion about REST client implementation in android, based on the talk at GoogleIO 2010, by Virgil Dobjanschi. My requirement may not necessarily involved, as I have some freedom to choose the configuration. I only target tablets configuration changes can be prevented if no other easy way (fix at Landscape mode etc) I am trying to achieve. Basic CRUD operation to my server (JSON RPC/ REST). Basically mimic an ajax request from android app (no webview, need native app) Based on the above mentioned talk, and some reading I see these options. Implement any of the 3 mentioned in the Google IO talk Especially, the last pattern may be more suitable as I don't care much of caching. But not sure how "real time" is sync implementation. Use HTTP request in AsyncTask. Simplest, but need to avoid re-sending request during change in device configuration (orientation change etc). Even if I fix at one orientation, recreation of activity still happens. So need to handle it elegantly. Use service to handle http request. So far, it say use service for long ruiing request. Not sure whether it is a good approach for simple GET/POST/PUt requests. Please share your experience on what could be the best way.

  Read the article

• Permuting a binary tree without the use of lists

  - by Banang

  I need to find an algorithm for generating every possible permutation of a binary tree, and need to do so without using lists (this is because the tree itself carries semantics and restraints that cannot be translated into lists). I've found an algorithm that works for trees with the height of three or less, but whenever I get to greater hights, I loose one set of possible permutations per height added. Each node carries information about its original state, so that one node can determine if all possible permutations have been tried for that node. Also, the node carries information on weather or not it's been 'swapped', i.e. if it has seen all possible permutations of it's subtree. The tree is left-centered, meaning that the right node should always (except in some cases that I don't need to cover for this algorithm) be a leaf node, while the left node is always either a leaf or a branch. The algorithm I'm using at the moment can be described sort of like this: if the left child node has been swapped swap my right node with the left child nodes right node set the left child node as 'unswapped' if the current node is back to its original state swap my right node with the lowest left nodes' right node swap the lowest left nodes two childnodes set my left node as 'unswapped' set my left chilnode to use this as it's original state set this node as swapped return null return this; else if the left child has not been swapped if the result of trying to permute left child is null return the permutation of this node else return the permutation of the left child node if this node has a left node and a right node that are both leaves swap them set this node to be 'swapped' The desired behaviour of the algoritm would be something like this: branch / | branch 3 / | branch 2 / | 0 1 branch / | branch 3 / | branch 2 / | 1 0 <-- first swap branch / | branch 3 / | branch 1 <-- second swap / | 2 0 branch / | branch 3 / | branch 1 / | 0 2 <-- third swap branch / | branch 3 / | branch 0 <-- fourth swap / | 1 2 and so on... Sorry for the ridiculisly long and waddly explanation, would really, really apreciate any sort of help you guys could offer me. Thanks a bunch!

  Read the article

• Accessing memory buffer after fread()

  - by xiongtx

  I'm confused as to how fread() is used. Below is an example from cplusplus.com /* fread example: read a complete file */ #include <stdio.h> #include <stdlib.h> int main () { FILE * pFile; long lSize; char * buffer; size_t result; pFile = fopen ( "myfile.bin" , "rb" ); if (pFile==NULL) {fputs ("File error",stderr); exit (1);} // obtain file size: fseek (pFile , 0 , SEEK_END); lSize = ftell (pFile); rewind (pFile); // allocate memory to contain the whole file: buffer = (char*) malloc (sizeof(char)*lSize); if (buffer == NULL) {fputs ("Memory error",stderr); exit (2);} // copy the file into the buffer: result = fread (buffer,1,lSize,pFile); if (result != lSize) {fputs ("Reading error",stderr); exit (3);} /* the whole file is now loaded in the memory buffer. */ // terminate fclose (pFile); free (buffer); return 0; } Let's say that I don't use fclose() just yet. Can I now just treat buffer as an array and access elements like buffer[i]? Or do I have to do something else?

  Read the article

• Any merit to a lazy-ish juxt function?

  - by NielsK

  In answering a question about a function that maps over multiple functions with the same arguments (A: juxt), I came up with a function that basically took the same form as juxt, but used map: (defn could-be-lazy-juxt [& funs] (fn [& args] (map #(apply %1 %2) funs (repeat args)))) => ((juxt inc dec str) 1) [2 0 "1"] => ((could-be-lazy-juxt inc dec str) 1) (2 0 "1") => ((juxt * / -) 6 2) [12 3 4] => ((could-be-lazy-juxt * / -) 6 2) (12 3 4) As posted in the original question, I have little clue about the laziness or performance of it, but timing in the REPL does suggest something lazy-ish is going on. => (time (apply (juxt + -) (range 1 100))) "Elapsed time: 0.097198 msecs" [4950 -4948] => (time (apply (could-be-lazy-juxt + -) (range 1 100))) "Elapsed time: 0.074558 msecs" (4950 -4948) => (time (apply (juxt + -) (range 10000000))) "Elapsed time: 1019.317913 msecs" [49999995000000 -49999995000000] => (time (apply (could-be-lazy-juxt + -) (range 10000000))) "Elapsed time: 0.070332 msecs" (49999995000000 -49999995000000) I'm sure this function is not really that quick (the print of the outcome 'feels' about as long in both). Doing a 'take x' on the function only limits the amount of functions evaluated, which probably is limited in it's applicability, and limiting the other parameters by 'take' should be just as lazy in normal juxt. Is this juxt really lazy ? Would a lazy juxt bring anything useful to the table, for instance as a compositing step between other lazy functions ? What are the performance (mem / cpu / object count / compilation) implications ? Is that why the Clojure juxt implementation is done with a reduce and returns a vector ? Edit: Somehow things can always be done simpler in Clojure. (defn could-be-lazy-juxt [& funs] (fn [& args] (map #(apply % args) funs)))

  Read the article

• Why does Hibernate 2nd level cache only cache queries within a session?

  - by Synesso

  Using a named query in our application and with ehcache as the provider, it seems that the query results are tied to the session within the cache. Any attempt to access the value from the cache for a second time results in a LazyInitializationException We have set lazy = true for the following mapping because this object is also used by another part of the system which does not require the reference... and we want to keep it lean. <class name="domain.ReferenceAdPoint" table="ad_point" mutable="false" lazy="false"> <cache usage="read-only"/> <id name="code" type="long" column="ad_point_id"> <generator class="assigned" /> </id> <property name="name" column="ad_point_description" type="string"/> <set name="synonyms" table="ad_point_synonym" cascade="all-delete-orphan" lazy="true"> <cache usage="read-only"/> <key column="ad_point_id" /> <element type="string" column="synonym_description" /> </set> </class> <query name="find.adpoints.by.heading">from ReferenceAdPoint adpoint left outer join fetch adpoint.synonyms where adpoint.adPointField.headingCode = ?</query> Here's a snippet from our hibernate.cfg.xml <property name="hibernate.cache.provider_class">net.sf.ehcache.hibernate.SingletonEhCacheProvider</property> <property name="hibernate.cache.use_query_cache">true</property> It doesn't seem to make sense that the cache would be constrained to the session. Why are the cached queries not usable outside of the (relatively short-lived) sessions?

  Read the article

• Reorganizing development environment for single developer/small shop

  - by Matthew

  I have been developing for my company for approximately three years. We serve up a web portal using Microsoft .NET and MS SQL Server on DotNetNuke. I am going to leave my job full time at the end of April. I am leaving on good terms, and I really care about this company and the state of the web project. Because I haven't worked in a team environment in a long time, I have probably lost touch with what 'real' setups look like. When I leave, I predict the company will either find another developer to take over, or at least have developers work on a contractual basis. Because I have not worked with other developers, I am very concerned with leaving the company (and the developer they hire) with a jumbled mess. I'd like to believe I am a good developer and everything makes sense, but I have no way to tell. My question, is how do I set up the development environment, so the company and the next developer will have little trouble getting started? What would you as a developer like in place before working on a project you've never worked on? Here's some relevant information: There is a development server onsite and a production server offsite in a data center . There is a server where backups and source code (Sourcegear Vault) are stored. There is no formal documentation but there are comments in the code. The company budget is tight so free suggestions will help the best. I will be around after the end of April on a consulting basis so I can ask simple questions but I will not be available full time to train someone

  Read the article

• How can i use a commandlinetool (ie. sox) via subprocess.Popen with mod_wsgi?

  - by marue

  I have a custom django filefield that makes use of sox, a commandline audiotool. This works pretty well as long as i use the django development server. But as soon as i switch to the production server, using apache2 and mod_wsgi, mod_wsgi catches every output to stdout. This makes it impossible to use the commandline tool to evaluate the file, for example use it to check if the uploaded file really is an audio file like this: filetype=subprocess.Popen([sox,'--i','-t','%s'%self.path], shell=False,\ stdout=subprocess.PIPE, stderr=subprocess.PIPE) (filetype,error)=filetype.communicate() if error: raise EnvironmentError((1,'AudioFile error while determining audioformat: %s'%error)) Is there a way to workaround for this? edit the error i get is "missing filename". I am using mod_wsgi 2.5, standard with ubuntu 8.04. edit2 What exactly happens, when i call subprocess.Popen from within django in mod_wsgi? Shouldn't subprocess stdin/stdout be independent from django stdin/stdout? In that case mod_wsgi should not affect programms called via subprocess... I'm really confused right now, because the file i am trying to access is a temporary file, created via a filenamevariable that i pass to the file creation and the subprocess command. That file is being written to /tmp, where the rights are 777, so it can't be a rights issue. And the error message is not "file does not exist", but "missing filename", which suggests i am not passing a filename as parameter to the commandlinetool.

  Read the article

• IE 7 activex object (or xmlhttprequest?) open method using POST takes 20-30 seconds to return

  - by Toddeman

  i have a problem that only shows itself in IE7. its a simple ajax call. i got my object (accounting for the browser) so in 7 i SHOULD have an ActiveXObject. when i call open with POST, it takes 20-30 seconds to return. i am using a TON of GET calls to populate information and all of these work (finally, after some bug fixing), but i am NOT a web developer so much like the other bugs i had to fix, i figured i was just missing another IE anomaly. this is not a consistent bug either, which makes it harder to find for me. most times the POST functions like it does in Firefox or Chrome, but maybe 1 out of 4 or 5 will take 20-30 seconds to return. it DOES return correctly when it returns, it just takes a long time. am i missing something simple? or is there a smarter way for me to find out exactly what is going on (like the equivalent of the firebug 'net' tab for windows?).

  Read the article

• Socket Read In Multi-Threaded Application Returns Zero Bytes or EINTR (-1)

  - by user309670

  Hi. Am a c-coder for a while now - neither a newbie nor an expert. Now, I have a certain daemoned application in C on a PPC Linux. I use PHP's socket_connect as a client to connect to this service locally. The server uses epoll for concurrent connections via a Unix socket. A user submitted string is parsed for certain characters/words using strstr() and if found, spawns 4 joinable threads to different websites simultaneously. I use socket, connect, write and read, to interact with the said webservers via TCP on port 80 in each thread. All connections and writes seems successful. Reads to the webserver sockets fail however, with either (A) all 3 threads seem to hang, and only one thread returns -1 and errno is set to 104. The responding thread takes like 10 minutes - an eternity long:-(. *I read somewhere that the 104 (is EINTR) suggests that ...'the connection was reset by peer', or (B) 0 bytes from 3 threads, and only 1 of the 4 threads actually returns some data. Isn't the socket read/write thread-safe? Otherwise, use thread-safe (and reentrant) libc functions such as strtok_r, gethostbyname_r, etc. *I doubt that the said webhosts are actually resetting the connection, because when I run a single-threaded standalone (everything else equal) all things works perfectly right. There's a second problem too (oops), I can't write back to the client who connect to my epoll-ed Unix socket. My daemon application will hang and hog CPU 100% for ever. Yet nothing is written to the clients end. Am sure the client (a very typical PHP socket application) hasn't closed the connection whenever this is happening - no error(s) detected either. I cannot figure-out whatever is wrong even with Valgrind or GDB

  Read the article

• Strange results from OdbcDataReader reading Sqlite DB

  - by stout

  This method returns some strange results, and was wondering if someone could explain why this is happening, and possibly a solution to get my desired results. Results: FileName = what I'd expect FileSize = what I'd expect Buffer = all bytes = 0 BytesRead = 0 BlobString = string of binary data FieldType = BLOB (what I'd expect) ColumnType = System.String Furthermore, if the file is greater than a few KB, the reader throws an exception stating the StringBuilder capacity argument must be greater than zero (presummably because the size is greater than Int32.MaxValue). I guess my question is how does one properly read large BLOBs from an OdbcDataReader? public static String SaveBinaryFile(String Key) { try { Connect(); OdbcCommand Command = new OdbcCommand("SELECT [_filename_],[_filesize_],[_content_] FROM [_sys_content] WHERE [_key_] = '" + Key + "';", Connection); OdbcDataReader Reader = Command.ExecuteReader(CommandBehavior.SequentialAccess); if (Reader.HasRows == false) return null; String FileName = Reader.GetString(0); int FileSize = int.Parse(Reader.GetString(1)); byte[] Buffer = new byte[FileSize]; long BytesRead = Reader.GetBytes(2, 0, Buffer, 0, FileSize); String BlobString = (String)Reader["_content_"]; String FieldType = Reader.GetDataTypeName(2); Type ColumnType = Reader.GetFieldType(2); return null; } catch (Exception ex) { Tools.ErrorHandler.Catch(ex); return null; } }

  Read the article

• How to print all values of Vector[]

  - by terence6

  I have a Vector[] of Object type that stores my data. How to print all it's objects ? The code: private static Vector<Object[]> vector = new Vector<Object[]>(); int event=0; for(int i=0; i<10; i++){ vector.add( this.addToObject(System.currentTimeMillis(), event , "String") ); event++; } private Object[] addToObject(long t, int i,String s ){ Object[] o = new Object[4]; o[3] = s; o[2] = i; o[1] = "00000"; o[0] = t; return o; } printing public static void main(String[]args){ main m = new Main(); for(int i=0; i< m.vector.size(); i++){ } } And I'd like to get sth like this : 1202393057117 1 OOOOO String 1202393057117 2 OOOOO String 1202393057118 3 OOOOO String 1202393057118 4 OOOOO String 1202393057118 5 OOOOO String

  Read the article

< Previous Page | 526 527 528 529 530 531 532 533 534 535 536 537  | Next Page >