Search Results

Search found 18713 results on 749 pages for 'suggestions wanted'.

Page 531/749 | < Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >

• Postfix qmgr process causes heavy overload on mailservers

  - by Mattias

  We are using Postfix as MTA for our e-mailmarketing software and once in a while we see that the load on one of the mailservers rises above 5. The load is caused by the qmgr-process which is the heart of Postfix and I see that it is consuming a lot of CPU resources. The process seems to be stuck because after 15 minutes it is still doing the samething and still increasing the load. Once I restart the postfix service the load rapidly decreases to below 1 and Postfix continues to send e-mails without any problems. I'm wondering if anyone else has encountered this problem and if people have suggestions on how to prevent it. The problem shows up on all our mailservers but almost never at more than 1 at the time. It seems to be triggered only when we are sending a mailing but the size (10 or 100.000 e-mails doesn't seem to make a difference). It maybe happens once a week or even less often and the time and day is also different every time. We tried to solve the problem by decreasing the amount of messages qmgr is allowed to process but this didn't solve it. We are using Postfix 2.5.5 on Debian Lenny 5.0.8 (postfix is installed through the default Debian repository). No special messages can be found in the logs (syslog, messages, mail.*). Thank you for your time

  Read the article

• Postfix mail forwarder

  - by Andrew

  Hello, I just bought a dedicated server and I'm trying to install a webserver on it. The server is Ubuntu 10.04. I installed ftp, nginx, php, mysql, bind and now I have to install mail server. For the mail server I'm using Postfix, because it's recomended on ubuntu. I installed Postfix with apt-get install postfix but mail() function from php wasn't working. After a little debug I found the way to solve this : I created an empty file /etc/postfix/main.cf and it worked good. I do have a mx record like this mail 5M IN A xxx.xxx.xxx.xxx example.com. 5M IN MX 1 mail.example.com. After that I wanted to forward all e-mails to my GMail address. So I googled for it and I found in the official docs Virtual Domain Host Forwarding I added these lines in main.cf virtual_alias_domains = example.com virtual_alias_maps = hash:/etc/postfix/virtual I created map file and I placed this line in it @example.com [email protected] I run in terminal postmap /etc/postfix/virtual postfix reload The result: I can send e-mail from php with mail() function, but when I send an email to [email protected] that e-mail isn't forwarded to my Gmail. How to solve this? -Andrew I also tried this but not working http://rackerhacker.com/2006/12/26/postfix-virtual-mailboxes-forwarding-externally/ It works now! But I don't know what the problem was. I just installed "Mail Server" from Tasksel and after that it worked fine. Can anyone tell me what Tasksel installed or that it changed ?

  Read the article

• Recommendation on remote access setup for accessing customer systems

  - by gregmac

  I'm looking for a product recommendation (open or commercial) that will allow remote access to customer sites for tech support purposes. We need to be able to gain access to help troubleshoot problems on servers. Currently end up using anything from RDP on public IP, to various VPNs that clients happen to have, to webex-type sessions that require lots of interaction from both sides to get things working. This often means a problem that could take 10 minutes to solve takes an extra 30+ minutes messing around trying to get a connection up. There are multiple customer sites, which should NOT have access to each other. At each site, there is anywhere from 1 to 8 servers (Windows 2003 or 2008) that need to be accessed. Support connection to machines even if they're behind a firewall/router with no public IP Be able to selectively allow/deny access from customer site. Customer site should not be able to connect outbound to anywhere else (our systems, or other customer sites) Support multiple users from our end If not a VPN connection (where RDP could be used over top), should support: Remote desktop access, including copy/paste File transfers Preferably would have some way to list all remote systems, showing online/offline. Anyone have any suggestions?

  Read the article

• Keyboard's media keys are blocked by a program

  - by Mike Hanson

  I've got a Microsoft Natural Ergonomic Keyboard 4000. In addition to the regular keys, it's also got keys for Web/Home, Search, Mail, Favorites (5), Calculator, and Media functions (Mute, Volume Up/Down, and Play/Pause). Everything works most of the time, and the exception is rather odd. I use a programming system called Clarion. When that has focus, the Media keys don't work. (All the others still do.) I've also discovered that programs that I create using Clarion also block the media keys (only when they have focus). This indicates that it's probably something in Clarion's Run-Time Library (RTL) that's causing the trouble. The keys will work if I click on a non-Clarion window before hitting the media key, but that's an undesirable hassle. The odd thing is that I have many colleagues with the same keyboard, and they have no problem. When I recently upgraded from Vista Professional to Win7 Ultimate, I noticed that various things "appear" differently. For example, with my old system, when I changed the volume or muted the volume bar visualization always appeared at the bottom right on the screen. Now it doesn't appear in certain programs, even when it works. This indicates an order of precedence for visual elements. I'm fairly certain a similar order of precedence exists for keyboard hooks. Depending on how the hooks are defined, and the order in which they're applied, it would seem that sometimes the IntelliType drivers don't see the media keystrokes. The Media keys probably behave differently than the rest of the "special" keys, because they are more of a standard across all keyboards, so perhaps are handled by a different driver hooking mechanism. Does anyone have any suggestions of how I might fix this problem? Is there some way to change the order of hooks? Delay the loading of the IntelliType driver? Thanks in advance!

  Read the article

• picking a linux compatable motherboard

  - by Chris

  Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

  Read the article

• Vagrant doesn't detect chef-solo unless re-installed

  - by nightowl

  I am using Vagrant to test my Chef recipes in Amazon AWS, and I am encountering an irritating issue: I initially assumed that Vagrant would install chef itself (as it does when using Virtual Box as the provider) but it seems that this needs to be done using the cloud-init script. However, even after I successfully installed the chef gem via cloud-init I was still getting the following error: The chef binary (eitherchef-soloorchef-client) was not found A quick google of this error suggested three probable causes: Chef had failed to install It had installed, but the directory was not in the $PATH environment variable It had installed and in the $PATH but with incorrect permissions I logged in and double checked; chef-solo and chef-client were installed; The path variable for the user, sudo and root all included /usr/local/bin and permissions were all fine. I managed to solve this problem by uninstalling and reinstalling the gem using sudo gem install chef. I don't understand why this should resolve the issue and it is a bit of a problem if I have to ssh into a test box and manually install the gem every time. Does anyone have any suggestions why this might be happening?

  Read the article

• Lost Permission on Files using wrong chmod syntax Centos 5.5

  - by alloutfallout

  Hello, I was trying to remove write permissions on an entire directory, and I used the incorrect command: chmod 644 -r sites/default I meant to type chmod -R 644 sites/default The result was this: chmod: cannot access `644': No such file or directory $ ls -als sites total 24 4 drwxr-xr-x 5 user group 4096 Jan 11 10:54 . 4 drwxrwxr-x 14 user group 4096 Jan 11 10:11 .. 4 drwxr-xr-x 4 user group 4096 Jan 5 01:25 all 4 d-w------- 3 user group 4096 Jan 11 10:43 default 4 -rw-r--r-- 1 user group 1849 Apr 15 2010 example.sites.php I fixed the permissions on the default folder with $ chmod 644 sites/default But, the following ls shows a all the files with red backgrounds and question marks. I can't access any files unless I am root. $ ls -als sites/default total 0 ? ?--------- ? ? ? ? ? . ? ?--------- ? ? ? ? ? .. ? ?--------- ? ? ? ? ? default.settings.php ? ?--------- ? ? ? ? ? files ? ?--------- ? ? ? ? ? settings.php When I log in as root, I can edit all of the files, and their permissions appear correctly. I do not know how to undo the damage caused by using -r with chmod instead of -R. Any Suggestions?

  Read the article

• Networking 2 Virtual PC with one VPC as DHCP server

  - by vivek

  My host OS is Win XP Professional. The host has a real network connection via DSL and I created a second network connection using Microsoft Loopback Adapter. Internet connection sharing is enabled. The Microsoft Loopback adapter has a IP address of 192.168.0.1. I have 1 Virtual PC which has Windows Server 2003. I have setup the network connection on this VPC to use Microsoft Loopback Adapter. I setup this VPC to be the Domain Controller , DNS Server and DHCP Server. I set this to a static IP address 192.168.0.2 (on the same subnet as the MS Loopback adapter) I have a second Virtual PC which also has Windows Server 2003. The network connection on this VPC is set to "Local Only". I want this VPC to get its IP address from the 1st VPC on which I setup as a DHCP server. What i want is the 2 VPC should be in a network with one of the VPC acting as the domain controller, DNS Server and DHCP server. The second VPC shoud get its IP address from the 1st VPC. It should be a part of the domain of the 1st VPC. When i tried to make the second VPC get the IP address from the first VPC I am not succeeding. Can somebody post some suggestions on how to go about this ?

  Read the article

• My PC is powercycling, what's going wrong?

  - by Renai

  So here is my sorry story of woe. My PC has been functioning normally for some time. Last week I bought a cheapish powered USB hub and plugged it into my home PC, which runs Windows 7. This weekend I plugged that hub into my home PC. At some stage I hibernated the PC. Then later on I plugged my Kobo eReader into the hub to charge. Later on I started the PC up. Only thing is, it now won’t start up. It just powercycles on for a second and a half with the fans at full, then powercycles off. Then back on for two seconds, then back off. There’s no display at all and it won’t get to the BIOS screen. It looks like anything USB is not functioning — the keyboard and mouse are not lighting up etc. I’ve taken out the BIOS battery and reseated the RAM, reseated the graphics card and so on, but my suspicion is that I have blown the USB section of the motherboard somehow. Suggestions? All else failing, where is the best place to take this machine in Sydney to get evaluated? It’s a fairly powerful beast, all up has cost me about $2500 over the years, including upgrades and a recent new graphics card, so can’t just start from scratch.

  Read the article

• Postfix: Modify sender address based on recipient

  - by PJ P

  We have a Postfix server that receives mail from our application servers. Senders are in the form [email protected] (where host.fqdn can vary, depending on source server) and recipients can be internal or external users. Messages going to external users should have the sender changed to [email protected]. I have tried using canonical maps, but since that is handled by the cleanup daemon, before any transport decisions are made, it would affect all sender addresses. I have also tried creating a custom smtp transport with generic mappings and configuring transport_maps to use that custom smtp transport for external domains. However, generic mappings affect both sender and recipient addresses. Lastly, I've tried the following: Create a custom smtpd daemon that specifies sender canonical maps and a unique transport table. Send all externally addressed mail to that custom daemon. Ideally, sender canonical maps would transform the sender address and the unique transport table would relay messages to the internet. However, evidently, only one transport table can be used per Postfix instance. I want to avoid creating an entirely new Postfix instance to accommodate this rewriting. Any suggestions? (and thanks in advance)

  Read the article

• Can many addon domains slow down cPanel or create problems?

  - by Marco Demaio

  I actually resell hosting plans by using one single cPanel account and many addon domains under it. Basically for each new user I don't create a new cP account, but I simply create a new ADDON domain and give him the necessary space. I know in this way the final user won't be able to manage his emails and he want be able to access all cPanel features, but that's ok. My only question is: "is there a limit on the number of cPanel addon domain that can be added?". I know in my account I'm allowed to add unlimited addon domains, but is there something that might happen that slows down cPanel or could create problems? I mean is there any suggestions you could give me about the way i'm using cPanel which might not be the usual way of using it. (As for instance: "be aware that Awstast could run very slow or crash", or "be aware that mails from different addon domains under the same cp account could create many problems.", etc.) Many thanks!

  Read the article

• High load average due to high system cpu load (%sys)

  - by Nick

  We have server with high traffic website. Recently we moved from 2 x 4 core server (8 cores in /proc/cpuinfo), 32 GB RAM, running CentOS 5.x, to 2 x 4 core server (16 cores in /proc/cpuinfo), 32 GB RAM, running CentOS 6.3 Server running nginx as a proxy, mysql server and sphinx-search. Traffic is high, but mysql and sphinx-search databases are relatively small, and usually everything works blazing fast. Today server experienced load average of 100++. Looking at top and sar, we noticed that (%sys) is very high - 50 to 70%. Disk utilization was less 1%. We tried to reboot, but problem existed after the reboot. At any moment server had at least 3-4 GB free RAM. Only message shown by dmesg was "possible SYN flooding on port 80. Sending cookies.". Here is snippet of sar 11:00:01 CPU %user %nice %system %iowait %steal %idle 11:10:01 all 21.60 0.00 66.38 0.03 0.00 11.99 We know that this is traffic issue, but we do not know how to proceed future and where to check for solution. Is there a way we can find where exactly those "66.38%" are used. Any suggestions would be appreciated.

  Read the article

• What steps should I take to debug this non-starting hvm virtual machine?

  - by Ophidian

  I have a dom0 machine running CentOS 5.4 with all the latest updates using Xen as my hypervisor. I am using Xen in part because this machine was set up prior to KVM being included in RHEL, and in part because KVM's network bridging configuration is not nearly as simple as Xen's. The dom0 machine is headless and I do all of my VM management via virsh from the command line. I have two hvm domU's: A web server running CentOS 5.4 A mail server running Gentoo Both VM's are backed by LV's on the dom0 but do not use LVM in the domU. Both have virtually identical libvirt configurations (differing by expected things like name, UUID, NIC MAC, VNC port, etc). The web server domU (WSdomU hereafter) does not start since applying the most recent kernel update (kernel-xen-2.6.18-164.15.1.el5.x86_64 and kernel-2.6.18-164.15.1.el5.x86_64 for the dom0 and WSdomU respectively). By 'not start' I mean it appears to be running but it does not use an CPU cycles, does not bring up a graphical console, and does not respond on the network. The WSdomU is listed as no state rather than the normal running or blocked in xentop. The mail server domU starts fine and functions normally. Here are the steps I have taken so far that did not solve the problem: Reboot the dom0 to see if things come up on their own Check xen dmesg on dom0 Check xend logs (a cursory viewing did not show anything blatant; specific suggestions of things to look for would be appreciated) Attempted to connect to the WSdomU's graphical (VNC) console from the dom0 Shutdown the mail server domU and attempt to start the WSdomU Check the SELinux labels on backing LV's (they're the same) Set SELinux to permissive and attempt to start the WSdomU Use virsh edit to try tweaking the WSdomU config virsh undefine, reboot, virsh define the WSdomU config dd the WSdomU LV to an .img file, copy it to my Fedora desktop and run it under KVM (works fine) What steps should I take next to debug this? I will edit in any additional configuration's requested in the comments.

  Read the article

• Wireless connection drops when wired computer starts a game.

  - by Skadlig

  Starting this week I have had a strange problem on my network. Some background of my setup: Internet is provided by a adsl-modem. A D-link Dir-600 router is hooked up to to adsl-modem. My computer is hooked up to the router using a cat-5 cable. My wife's computer is hooked up using a wireless usb dongle, TP-Link TL-WN821N. Both computers use windows 7 64-bit home premium. Up until this week everything was normal, we could for instance play Dungeons & Dragons Online together without any network issues. Now every time I start DDO or any other network game, for instance L4D, the whole wireless network drops. I have confirmed that it's not just her computer using an Samsung Galaxy Spica android phone. Shutting down the game on my end restores the wireless connection automagicly. My wife can start DDO without the net dropping but if I plug in a wireless network card in my computer and start up the game the connection drops. So it seems like something my computer, and my computer only, does when starting a game makes the wireless connection write a sad note and kill it self but for the life of me I can't figure out what that might be. I could hook her computer up using cat-5 but I would prefer not to do that. Does anyone have any suggestions as to what the problem might be, what I can do to fix it or what I should do to get more data regarding what is happening?

  Read the article

• Compress a folder of PDF files into separate zip archives

  - by Panrubius

  I wanted to take a folder full of PDF files and create a number of separate zip files, after following the advice on this question everything worked *almost*perfectly. Here's what happened: When I issued this command in Terminal: zip -s 5m -r ~/Desktop/invoices ~/Desktop/Invoices/ Everything worked really well, in that I got 11 ZIP files of approximately 5 MB each; placed in the folder specified. However, the files they outputted were named as follows: invoices.z01 invoices.z02 invoices.z03 invoices.z04 invoices.z05 invoices.z06 invoices.z07 invoices.z08 invoices.z09 invoices.z10 invoices.zip So as you can see only invoices.zip has been named correctly. I could go through and rename them one by one, but seriously, if we start doing that then what in the name of Evolution are computers for?! Now, I am also aware that I'm relatively new to the Terminal; so I could be making a very silly mistake somewhere. If that's the case, please be patient :-) Any help would be greatly appreciated. One last note: I'm quadriplegic so I would like to avoid GUI applications as much as possible, I use voice recognition software you see this working in the Terminal is much much easier.

  Read the article

• Windows 7 Cable Connection Rehabilitation

  - by Giovanni De Gaetano

  I recently switched the operating system of my laptop from Windows XP to Windows 7. My web-connection is such that I need to identify everytime before connecting. Since there is no automatic identification request, while using Windows XP I was used to de-abilitate and rehabilitate the cable connection after every switching on. I successfully installed the web-connection on Windows 7, and later on I switched the computer off and on (simply because I had to sleep!). After restarting the computer, since there was no automatic identification request, I de-abilitate the cable connection. But this time I didn't find any way to rehabilitate it! Do you have any suggestions on how to solve the problem? My "Wired AutoConfiguration" has the startup type "Automatic", but it's not enough to restart automatically the cable connection! I tried to do some standard things like restart the computer, unplug and plug in again the cable, reinstall the web-connection from the scratch... But nothing worked! Thank you very much for your help!

  Read the article

• Is it a good idea to run Redmine using Webrick through Nginx?

  - by Rohit

  The task here is to get Redmine setup for a small (<20) team. There may be a few users who would access the setup as business clients. I am familiar with setting up PHP for Apache, and recently, Nginx. I am not familiar with Ruby, Ruby-On-Rails, etc. I prefer to use the OS's (Ubuntu Linux LTS) package manager to install the different components as it takes care of dependencies and updates. I have setup Nginx with PHP-FPM successfully and am struggling with Redmine. As suggested here, I got Redmine running on port 3000. # /etc/init/redmine.conf # Redmine description "Redmine" start on runlevel [2345] stop on runlevel [!2345] expect daemon exec ruby /usr/share/redmine/script/server webrick -e production -b 0.0.0.0 -d And using the Nginx config on this page, I used Nginx to proxy requests to Webrick. server { listen 80; server_name myredmine.example.com; location / { proxy_pass http://127.0.0.1:3000; } } This works well locally. I wanted some opinions before trying this out on the live box (a 256 MB VPS). Further, should I use something like monit to monitor webrick for failure?

  Read the article

• How can I cornify a SharePoint site?

  - by Chris Farmer

  Inspired by the April 1 gravatar changes and the memory of last year's cornification of Stack Overflow, I wanted to add a cornify button to my company's SharePoint app. I just added their html snippet to a Content Editor Web Part. <a href="http://www.cornify.com" onclick="cornify_add();return false;"> <img src="http://www.cornify.com/assets/cornifycorn.gif" width="52" height="51" border="0" alt="Cornify" /> </a><script type="text/javascript" src="http://www.cornify.com/js/cornify.js"></script> The button renders all glittery and beautiful, and the magical functionality works fine in Chrome and Firefox (I'm on Windows 7) for me. But, in IE8, all the gorgeous unicorn images get added at the bottom of the page such that you can't see them unless you scroll down. Since most of our users are IE users, I fear that this just isn't going to be all that much fun. So, is there some known way to force this to work better in IE8, or is there another similarly fun site adornment utility that I could use that might behave better in a SharePoint 2007 app running in IE7/8?

  Read the article

• Apache22 on FreeBSD - Starts, does not respond to requests

  - by NuclearDog

  Hey folks! I'm running Apache 2.2.17 with the peruser MPM on FreeBSD 8.2-RC1 on Amazon's EC2 (so it's XEN). It was installed from ports. My problem is that, although Apache is running, listening for, and accepting connections, it doesn't actually respond to any or show them in the log at all. If I telnet to the port it's listening on and type out an HTTP request: GET / HTTP/1.1 Host: asdfasdf And hit enter a couple of times, it just sits there... Nothing. No response requesting with a browser either. There doesn't appear to be anything helpful in the error log: [Sun Jan 09 16:56:24 2011] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sun Jan 09 16:56:25 2011] [notice] Digest: generating secret for digest authentication ... [Sun Jan 09 16:56:25 2011] [notice] Digest: done [Sun Jan 09 16:56:25 2011] [notice] Apache/2.2.17 (FreeBSD) mod_ssl/2.2.17 The access log stays empty: root:/var/log# wc httpd-access.log 0 0 0 httpd-access.log root:/var/log# I've tried with accf_http and accf_data both enabled and disabled, and with both the stock configuration and my customized config. I also tried uninstalling apache22-peruser-mpm and just installing straight apache22... Still no luck. I tried removing all of the LoadModule lines from httpd.conf and just re-enabled the ones that were necessary to parse the config. Ended up with only the following loaded: root:/usr/local/etc/apache22# /usr/local/sbin/apachectl -M Loaded Modules: core_module (static) mpm_peruser_module (static) http_module (static) so_module (static) authz_host_module (shared) log_config_module (shared) alias_module (shared) Syntax OK root:/usr/local/etc/apache22# Same results. Apache is definitely what's listening on port 80: root:/usr/local/etc/apache22# sockstat -4 | grep httpd root httpd 43789 3 tcp4 6 *:80 *:* root httpd 43789 4 tcp4 *:* *:* root:/usr/local/etc/apache22# And I know it's not a firewall issue as there is nothing running locally, and connecting from the local box to 127.0.0.1:80 results in the same issue. Does anyone have any idea what's going on? Why it would be doing this? I've exhausted all of my debugging expertise. :/ Thanks for any suggestions!

  Read the article

• Problems compiling coreutils-8.5 on Solaris 5.10 on Intel platform

  - by PP

  I am having trouble compiling coreutils-8.5 on Solaris 5.10 on the Intel platform using cc. Firstly I had the following error during ./configure: checking whether <wchar.h> uses 'inline' correctly... no configure: error: <wchar.h> cannot be used with this compiler (/tool/sunstudio12.1/bin/cc -xc99=all -g -D_REENTRANT). This seemed similar to the problem in this question. The solution was to edit configure and replace the reference of -xc99=all to -xc99=all,no_lib. This permitted the configure to complete. Then I ran /usr/sfw/bin/gmake and it progressed until I received the following message: Making all in src gmake[2]: Entering directory `/home/peterp/src/coreutils-8.5/src' gmake all-am gmake[3]: Entering directory `/home/peterp/src/coreutils-8.5/src' CCLD chroot Undefined first referenced symbol in file eaccess ../lib/libcoreutils.a(euidaccess.o) ld: fatal: Symbol referencing errors. No output written to chroot What could cause this problem? PS I was only compiling coreutils because I wanted colour ls.

  Read the article

• What's the best way to run Drupal and Django sites behind the same Varnish server?

  - by Alexis Bellido

  I have a high traffic website running with Drupal and Apache, five web servers behind a Varnish server load balancing. Let's say this site is example.com. I'm using five backends and a director like this in my default.vcl: director balancer round-robin { { .backend = web1; } { .backend = web2; } { .backend = web3; } { .backend = web4; } { .backend = web5; } } Now I'm working on a new Django project that will be a new section of this site running on example.com/new-section. After checking the documentation I found I can do something like this: sub vcl_recv { if (req.url ~ "^/new-section/") { set req.backend = newbackend; } else { set req.backend = default; } } That is, using a different backend for a subdirectory /new-section under the same domain. My question is, how do I make something like this work with my director and load balancing setup? I'm probably going to run two or more web servers (backends) with my new Django project, each one with a mix of Gunicorn, Nginx, and a few Python packages, and would like to put all of those in their own Varnish director to load balance. Is it possible to do use the above approach to decide which director to use?, like this: sub vcl_recv { if (req.url ~ "^/new-section/") { set req.director = newdirector; } else { set req.director = balancer; } } All suggestions welcome. Thanks!

  Read the article

• get-eventlog issue

  - by Jim B

  I wanted to get a quick report of some log entries I saw on a server, so I ran: Get-Eventlog -logname system -newest 10 -computer fs1 | fl I got events back however the descriptions were all wrong. Here's an example: Index : 1260055 EntryType : Warning InstanceId : 2186936367 Message : The description for Event ID '-2108030929' in Source 'W32Time' cannot be found. The local compute r may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'time. windows.com,0x1' Category : (0) CategoryNumber : 0 ReplacementStrings : {time.windows.com,0x1} Source : W32Time TimeGenerated : 1/25/2010 10:43:31 AM TimeWritten : 1/25/2010 10:43:31 AM UserName : Note that if I pull the event ID property it's correct (in this case 38) Is this is known issue or is something wrong. The messages resolve fine via event viewer locally and remotely Here is the powershell version info: Name : ConsoleHost Version : 2.0 InstanceId : bc58fcf8-bba3-4ca8-8972-17dbd5d9ff08 UI : System.Management.Automation.Internal.Host.InternalHostUserInterface CurrentCulture : en-US CurrentUICulture : en-US PrivateData : Microsoft.PowerShell.ConsoleHost+ConsoleColorProxy IsRunspacePushed : False Runspace : System.Management.Automation.Runspaces.LocalRunspace Here is the revised version info: Name Value ---- ----- CLRVersion 2.0.50727.3603 BuildVersion 6.0.6002.18111 PSVersion 2.0 WSManStackVersion 2.0 PSCompatibleVersions {1.0, 2.0} SerializationVersion 1.1.0.1 PSRemotingProtocolVersion 2.1

  Read the article

• How to unblacklist an IP at Google?

  - by DJRayon

  I own a small business with two servers for webhosting. When setting up the primary (CentOS 5.5 + WHM, secondary is WHM DNS Only) server I kinda messed up the firewall, so the hackers could send stuff from my server. My primary IP is x.y.29.218. Anyway - I got blacklisted in several places, but now those blacklistings are gone. For a week or so, but Google still has my IP blacklisted. I handling serious damages because of that. Many clients want to switch from my hosting, etc. I've fixed the hole with CSF firewall SMTP_BLOCK option and enabled also the WHM SMTP TEAK Currently all I see from the Main Email View Mail Statistics (Errors section) in WHM is rows and rows of the following message removed-the-email-address-for-security R=lookuphost T=remote_smtp: SMTP error from remote mail server after end of data: host aspmx.l.google.com [a.b.39.27]: 550-5.7.1 [x.y.29.218 1] Our system has detected an unusual rate of\n550-5.7.1 unsolicited mail originating from your IP address. To protect our\n550-5.7.1 users from spam, mail sent from your IP address has been blocked.\n550-5.7.1 Please visit http://www.google.com/mail/help/bulk_mail.html to review\n550 5.7.1 our Bulk Email Senders Guidelines. h24si3868764fas.171 What are my options? I have one IP free. How can I configure Exim to send mail from that IP? My brain is like constantly blowing up because of this problem. Please someone, who has any knowledge how to deal with the current situation, please give me some kind of help - any help, suggestions, etc. I've tried everything I know, and I still don't know much, because this is the first time (I just started to webhost, etc) I deal with real physical servers not some kind of pre-setup VPS solution. Many - many thanks, whoever has time to offer some help.

  Read the article

• Cannot remove storage account because of lease, but I already deleted the server [closed]

  - by djechelon

  I recently created a temporary virtual server on Azure. Then I deleted it. I wanted to delete the storage account associated with it because I didn't need it any more. The problem is that the VHD file is still associated to a non-existing virtual machine!! If I try to delete the VHD from Virtual Machines\Disks I get the Delete button greyed and the table tells me it's still associated with the old VM. If I go to storage administration and try to delete the blob from vhds/ directory I get there is an active lease. I've read on Azure forums that, in these case, one should try to force releasing the lease from the blob. I followed their instructions and downloaded their script, but running it failed. The script detected that the disk is associated to a Virtual Machine and can't be deleted. The problem is that I'm 1000000% sure that I already deleted the VM. In fact, I currently only have a single VM that has its own HD and is up and running fine! What can I do to delete that storage account that is probably sucking money from my pocket?

  Read the article

• Arch Linux drops me on my school network

  - by Kravlin

  I'm running a Lenovo X61 which i carry around my college for getting on the internet at various points in the day. The network has always been finicky but recently it's gotten worse. I'll connect using iwconfig, get an ip from dhcpcd and log in using vpnc to their system. Sometimes I'll stay connected for hours but most of the time within 30 seconds my network traffic will drop to zero and i'll be unable to do anything. My computer still belives it's connected, however to try again i need to put my wireless interface down, put it back up and try again. It's gotten so bad that i've got a window on my computer pinging yahoo or google constantly in order to know if i'm still able to get online. I know other people who have used Arch Linux that don't have the same problems as well as people who use Ubuntu who haven't had any problems either. It seems like my computer is a special case. Does anyone have any suggestions on how to fix it? dmesg doesn't show anything out of the ordinary going on and i don't know where else to look for errors or other things to try. Edit: this doesn't happen on my home network. It's a problem that only happens at school.

  Read the article

< Previous Page | 527 528 529 530 531 532 533 534 535 536 537 538  | Next Page >