Search Results

Search found 27777 results on 1112 pages for 'display manager'.

Page 532/1112 | < Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >

• 4TB HGST SATA drive only shows 1.62 TB in Windows Server 2012

  - by user136085

  I'm using a Supermicro X9SRE-3F motherboard with the latest BIOS and 2x 4TB drives connected to the on-board SATA controller. If I set the BIOS to RAID and create a RAID 1 array, the array shows up in the BIOS as 3.6TB. However when I boot Windows (on a separate RAID 1 array), the 4TB drives show up individually in disk manager as 2x 1.62TB drives. I could use Windows 2012 to set up software RAID 1, but when I set the BIOS back to 2x individual drives, they still show up in Windows as 2x 1.62TB drives. How do I access the full capacity of these drives? Thanks, Brian Bulaw

  Read the article

• Public Folder not Visable from Front End Exchange 2003 Server

  - by Kyle Brandt

  I have a public folder that does not receive emails when the emails are sent via the Front-End Exchange Servers. When I go into the System Manager on the Front-End I don't see this particular public folder listed under the Public Folders. However, I do see it listed from the Front-End server. I see the emails that are not making it to the public folder listed in the local delivery queue on the front end server and they are in a retry state. Does anyone know how I might troubleshoot this?

  Read the article

• How to disable Windows File Protection in Windows XP or 7 from Registry?

  - by SEARAS

  How to disable Windows File Protection in Windows 7 and/or XP from Registry? I want to automatically replace a driver with my created driver. I used PendingFileRenameOperations key in HKLM\System\CurrentControlSet\Control\Session Manager but i've found that it can ONLY be used for simple (not-system) files, because Windows File Protection disables it for system files (see this post). Now I need to temporarily disable WFP (and turn it on after changing driver). You can tell me another way to disable it. It can help me too. Thanks in advance! Any ideas?

  Read the article

• Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

  - by bumble_bee_tuna

  Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

  Read the article

• What would you use to keep track of all the random information about your LAN/Enviroment?

  - by agnul

  Say you work in your average anarchy... no appointed IT guy, no Office-Manager whatsoever, just developers working in free-for-all mode and a couple of non technical people around for admin (non IT) stuff. What would you use to keep track of Hardware / Software inventory Backups of OS images, Drivers, and all that LAN configuration information Passwords for all the systems Currently I'm thinking of having some sort of wiki + web server on our only ''server-class'' machine, but then I fear I'd be the only one who would go through the hassle of adding information in the wiki... So, have you been through that? What would you suggest?

  Read the article

• Set custom mount point and mount options for USB stick

  - by kayahr

  Hello, I have an USB stick which contains private stuff like the SSH key. I want to mount this stick to my own home directory with 0700 permissions. Currently I do this with this line in /etc/fstab: LABEL=KAYSTICK /home/k/.kaystick auto rw,user,noauto,umask=077,fmask=177 0 0 This works great but there is one minor problem: In Nautilus (The Gnome file manager) the mount point ".kaystick" is displayed. I guess Nautilus simply scans the /etc/fstab file and displays everything it finds there. This mount point is pretty useless because it can't be clicked when the device is not present and it can't be clicked when the device is present (Because then it is already mounted). I know this is a really minor problem because I could simply ignore it but I'm a perfectionist and so I want to get rid of this useless mount point in Nautilus. Is there another way to customize the mount point and mount options for a specific USB device? Maybe it can be configured in udev? If yes, how?

  Read the article

• Computers "applying computer settings" for a long time on start-up...why?

  - by tombull89

  Hello. Might be a bit of a slong shot but I'm stumped, along with the ICT Manager for the school I'm working it. In one of the IT rooms when you switch a computer on it will boot through BIOS fine, but when it gets to "applying computer settings" it can hang for a long time (~15 minutes). If you unplug the computer from the network it starts up fine, gets to the login screen, then you can plug the network cable in and it will work fine. I don't think it's anything to do with the fact we've been coming close to running out of IP addresses or a problem with our DHCP. Microsoft KB says apply the latest service pack, which we've done, and check a service. Servers and domian controllers are S2003, Computers and Desktops are XP. Does anybody have any thoughts on what to try?

  Read the article

• Portable and Secure Document Repository

  - by Sivakanesh

  I'm trying to find a document manager/repository (WinXP) that can be used from a USB disk. I would like a tool that will allow you to add all documents into a single repository (or a secure file system). Ideally you would login to this portable application to add or retrieve a document and document shouldn't be accessible outside of the application. I have found an application called Benubird Pro (app is portable) that allows you to add files to a single repository, but downsides are that it is not secure and the repository is always stored on the PC and not on the USB disk. Are you able to recommend any other applications? Thanks

  Read the article

• How do you make Windows 7 fully case-sensitive with respect to the filesystem?

  - by trusktr

  I want to make Windows 7 case-sensitive when it reads/writes anything on the hard drive (the C drive, or any other NTFS drive). I found a video via google that says to change the registry key HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DontPrettyPath to a value of 1 (source). I also found a Windows support item that says something about modifying the registry key HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel\obcaseinsensitive that leads me to assume putting a value of 0 will make Windows case-sensitive with NTFS filesystems (source). I have a feeling the second solution is the answer, but I'm not sure and I don't want to try it without being sure. Does anyone know for sure what is the correct way to make Windows 7 case-sensitive when it reads/writes to the C drive (and any other NTFS drive)?

  Read the article

• apt-get for a package with when "contrib/source/Sources" is not found correctly

  - by Stuart Woodward

  I tried to install Webmin on Ubuntu by following the instructions on http://www.webmin.com/deb.html. Using the Update Manager GUI I added the repositories and the key deb http://download.webmin.com/download/repository sarge contrib deb http://webmin.mirror.somersettechsolutions.co.uk/repository sarge contrib However when I do an: apt-get update apt-get install webmin I get the error: W: Failed to fetch http://download.webmin.com/download/repository/dists/sarge/Release Unable to find expected entry 'contrib/source/Sources' in Release file (Wrong sources.list entry or malformed file) W: Failed to fetch http://webmin.mirror.somersettechsolutions.co.uk/repository/dists/sarge/Release Unable to find expected entry 'contrib/source/Sources' in Release file (Wrong sources.list entry or malformed file) Looing at the page at the URL I can see: 7029066c27ac6f5ef18d660d5741979a 20 contrib/source/Sources.gz Is the error caused by the fact that the Sources are compressed with gzip or am I doing something wrong?

  Read the article

• Alternatives for HP ProtectTools on EliteBook 2530p

  - by AlexDuggleby

  Hi, I'd like to use the HP fingerprint sensor on my Elitebook 2530p. The system is a fresh Win7 Enterprise 64-bit and we are looking for an alternative to the HP ProtectTools Security Suite, which seems a bit bloated. We have tried the UPEK ProtectorSuite (both WBF and stand-alone edition) and they say they can't find the fingerprint device. The device shows up in device manager, in the BioMetric system configuration I have enabled logon to Windows and Domain credentials. Are there any other fingerprint login software (free or commercial) that you can recommend. Thanks in advance, Alex

  Read the article

• recovering a broken GNOME-desktop in debian wheezy

  - by morgon

  an hour ago I had a working gnome-desktop on my debian system (thinkpad x121e). Then I installed compiz that crashed. After a reboot the gnome-desktop no longer started. Then I did some upgrades with aptitude, all gnome-packages seem to be there, but it is still not working. On startup I get a login-dialog, when I login there is no desktop, only some window-manager running that allows me to start a terminal. When I run "gnome-session" I get the error message "failed to load session "gnome". So how do I get back to a working desktop? I have tried "tasksel install gnome-desktop --new-install" but that just displays a progress window that after half an hour still shows 0%. Can someone help me please? I have tried "

  Read the article

• Prevent Windows 7 from unpluging External HDD

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• listing of VM's created before libvirt installation or started by any other VM management tool

  - by Dr. Death

  if my VM's are not created using virt-manager or are created using any other tool, then virsh system list command does not give them in the list of running VM's however they are running perfectly on my KVM server. Is there a way to list these VM's in my system list anyhow? I have VM's managed by GKVM, AQEMU, libvirt etc. also some of the user start their VM's using the qemu command as follows: kvm "image name" -m "memory". this starts the VM and allow them to work perfectly. but I am not able to list all these VM's using the virsh system list command.

  Read the article

• Windows Server 2008 r2 Hardening [on hold]

  - by Natasha

  I have created windows server 2008 r2, running on VM, Where Running services in Server Manager 1) File services ( in Role) 2) Telnet Client ( Features) Windows Firewall Disabled and we are using TOMCAT APACHE WEB SERVER, here i want to harden the windows server, While running SCW by simply clicking with default NEXT, at last when i have clicked SAVE and RUN now in SCW, immediately my remote desktop services disabled. May I Know the things i want to add in Roles,features and finally want to harden windows ? and also what about audit policy and network settings in that ? Please help me out, Don't Ignore.

  Read the article

• How do I remove/uninstall a corporate VPN?

  - by Metro Smurf

  I have a corporate VPN installed on one of my Windows XP systems that I'd like to completely uninstall. There are no programs listed in the add/remove programs dialog matching the corporate VPN name or similar. I can find the VPN being launched from here: C:\Documents and Settings\All Users\Application Data\Microsoft\Network\Connections\Cm\<Company Name> I can see the VPN connection under network connections: Name Type Device Name Connection Manager ------------------- Connection to <Company Name> Connection Manger WAM Miniport (PPTP) Do I just need to delete the connection from Network Connections? And delete the directory? Or?

  Read the article

• win2008 R2 server core software RAID

  - by shimonyk

  I am trying to set up software raid on a win2008 R2 server core. I have the disks configured as dynamic. In the server manager gui, i can see the disks, but when i right click, the option to set up "new mirrored volume" is not listed. I tried it with the command line using diskpart, and it gives the error "Virtual Disk Service Error: The size of the extent is less than the minimum." The drive are a new pair of 1Tb disks. Is this not supported in server core, or am i missing something else? Thank you

  Read the article

• How to reduce disk thrashing (paging)?

  - by skevar7

  I have 4 GB of RAM, but Windows still thrashes disk sometimes (especially often when an application is minimized for some time and then I activate it again). Completely stupid, because Task Manager shows 2 GB of RAM are free. Is there any way to prevent Windows swapping out program memory? I tried setting Superfetch to cache startup files only (it helped a bit) and turning off paging file (it helped much, and worked well for me in Windows XP; but Windows Vista/Windows 7 don't allow that - it shows "low on memory" message frequently, even when I have 1 GB of RAM free.) What can you advise me to do?

  Read the article

• IBM x226 server with Windows 2003 freezing and showing one HDD degraded

  - by Zvonko Telefonko

  We have an IBM x226 server with Windows 2003 running on it. For weeks it's been very slow and it freezes at least once each day. At the boot it show message "degraded" for one HDD and optimal for other HDDs. We have 4 HDDs in it set up in Raid 1. HDD 1 - HDD 2, HDD 3 - HDD4. It seems that HDD2 is the one who is causing problems (showing degraded status). There's an amber led blinking on it together with the green one. We installed ServerRAID manager downloaded from IBM and it gave us option for "rebuild". But the server froze at some point and now it's rebuilding from start again. I've done some Googling and it says that it could be to failing HDD or some cache battery. How can we verify what is the cause of this?

  Read the article

• diagnostic software for wifi adapter

  - by Nathan Fellman

  I'm having trouble with my wifi connection. Is there any software out there that can help me determine if the problem is in the drivers or in the hardware? Regretfully, I'm working on Vista Edit: The problem I'm having is that the Vista reports that the wireless radio is connected, shows an IP and all, the router also shows that the computer is connected, but there's no connectivity. I can't logon to the router, and I can't even ping it. When I ping it I get the response: General Failure I have tried connecting with and without various wireless security protocols. I have tried disabling the wireless adapter and re-enabling it from the Device Manager I have tried updating the driver None of this has helped. When I connect via Ethernet (with a cable, that is), everything works fine. Edit: I'm not using any firewall on the computer, that I'm aware of. The IP address for the WIFI adapter is similar to the one for the LAN adapter. They differ by one.

  Read the article

• How to enable CDR on AsteriskNow 1.5

  - by Michal Niklas

  I have upgraded PBX to Asterisk 1.6.2.7 and now CDR files are not created. It looks that such logging is disabled: Connected to Asterisk 1.6.2.7 currently running on pbx2 (pid = 5824) Verbosity is at least 3 pbx2*CLI> cdr show status pbx2*CLI> Call Detail Record (CDR) settings ---------------------------------- Logging: Disabled Mode: Simple Asterisk shows that CDR modules are loaded: pbx2*CLI> module show like cd Module Description Use Count cdr_manager.so Asterisk Manager Interface CDR Backend 0 cdr_csv.so Comma Separated Values CDR Backend 0 app_cdr.so Tell Asterisk to not maintain a CDR for 0 app_forkcdr.so Fork The CDR into 2 separate entities 0 func_cdr.so Call Detail Record (CDR) dialplan functi 0 cdr_custom.so Customizable Comma Separated Values CDR 0 6 modules loaded How to enable creating CDR csv files?

  Read the article

• Dell Powervault MD3000 - Not sharing Files between servers

  - by Kevin

  I'm a developer who has to set up a Dell Powervault MD3000 due to lack of resources. I have connected the Powervault to 2 Dell 2950 servers via the SAS cables. I performed the setup using Dell's MD Storage Manager software (4 disks, RAID 5 with hot spare). Then I added the disks using Windows 2003 disk management (Basic, not dynamic disk and formatted with NTFS). When I add files to the array from one server, they are not visible on the other server (and vice-versa). Is the error in the windows disk management configuration?

  Read the article

• Completely clean previous Radeon drivers on Windows 7 64bit

  - by tomo

  Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

  Read the article

• Belkin Wireless G router not working on Windows 7

  - by coore

  I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

  Read the article

• Performance improvements of VBulletin by integrating the plugins

  - by reggie

  I have amassed quite a lot of plugins and code that is being hooked into VBulletin's plugin system. There are good uses for this system. But since I am now locked in with the VB 3 branch and it is no longer updated, I wonder what kind of performance improvements I would see if I integrated all the plugins into the vbulletin files and turned the plugin system completely off. My site has about 1.5 mio posts, about 100,000 threads, 100,000 members (of which 10,000 are "active"). I estimate I have about 200 plugins from different products in the plugin manager. Has anybody ever tried this move and could share the experiences?

  Read the article

< Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >