Search Results

Search found 17625 results on 705 pages for 'techno log'.

Page 533/705 | < Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >

• Live CD has black screen HP DV6

  - by Shaun Killingbeck

  Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

  Read the article

• Ubuntu 12.04.3 Graphics Issues: Broken Pipes, Reinstalled Xorg and Bumblebee

  - by user190488

  It seems I have a problem, and am only making it worse by following what I find online. I have a new Asus N550JV-D71 (not sure about the part after the dash, though I definitely know it includes 71). I decided to downgrade Windows 8 to 7, then dual boot Ubuntu 12.04 with it (there were issues with Windows 8, and I had a Windows 7 disk handy). It did work and, after installing Bumblebee in tty (because it wouldn't boot when it was first installed), it worked marvelously for a little less than a week. However, I restarted it last night and got the Could not write bytes: Broken pipes error. (I see it's a very common error, but I've looked at the majority of the suggested Similar Questions already.) I followed what I could find online, followed those instructions (making sure to not install any sort of graphics drivers other than what Bumblebee provides), and it just seems to go further and further downhill. I'm afraid I didn't write the exact steps to get to this point (it was late by the time I gave up the night before), but it involved reinstalling lightdm, xorg (and xserver?), and Bumblebee. I then changed the Bumblebee.conf file so that Device=nvidia. I'm pretty new to Linux in general (I've used it since 10.04, but I hadn't had issues up until this computer, so it let me stay a newbie), so I'm not exactly sure what log files to look at to find the errors to look up. However, I did look at lshw and noticed that displays was marked as unassigned. Also, if I try to start lightdm using the command line, it always stops at Stopping Mount network filesystems. I should note that there isn't an xorg.conf file, and no .Xauthority. I would really, really prefer not to reinstall 12.04 if possible. I managed to get grub to display only a short time ago, and I can't boot to the dvd drive unless I go into the BIOS settings and manually change the boot order (that was an issue from the beginning, before the Ubuntu install), and getting into those settings often means rebooting several times due to the fact that the window to get to it is extremely small. I have most of what I need backed up, however, in case it does get to that point. If I really have to, I can just use the latest Ubuntu version instead of the LTS, but the reason I chose 12.04 in the first place is because I need something stable-ish, and Windows isn't suitable to what I need to do. I should note that the reason I restarted last night in the first place was that it wasn't charging the battery, and the wifi kept on going out. Hardware: Nvidia GeForce GT 750M Intel HD graphics 4600

  Read the article

• SFX Played Once per Collision or Hit

  - by David Dimalanta

  I have a question about using Box2D (engine for LibGDX used to make realistic physics). I observed on the code that I've made for the physics here below: @Override public boolean touchUp(int screenX, int screenY, int pointer, int button) { // TODO Touch Up Event if(is_Next_Fruit_Touched) { BodyEditorLoader Fruit_Loader = new BodyEditorLoader(Gdx.files.internal("Shape_Physics/Fruity Physics.json")); Fruit_BD.type = BodyType.DynamicBody; Fruit_BD.position.set(x, y); FixtureDef Fruit_FD = new FixtureDef(); // --> Allows you to make the object's physics. Fruit_FD.density = 1.0f; Fruit_FD.friction = 0.7f; Fruit_FD.restitution = 0.2f; MassData mass = new MassData(); mass.mass = 5f; Fruit_Body[n] = world.createBody(Fruit_BD); Fruit_Body[n].setActive(true); // --> Let your dragon fall. Fruit_Body[n].setMassData(mass); Fruit_Body[n].setGravityScale(1.0f); System.out.println("Eggs... " + n); Fruit_Loader.attachFixture(Fruit_Body[n], Body, Fruit_FD, Fruit_IMG.getWidth()); Fruit_Origin = Fruit_Loader.getOrigin(Body, Fruit_IMG.getWidth()).cpy(); is_Next_Fruit_Touched = false; up = y; Gdx.app.log("Initial Y-coordinate", "Y at " + up); //Once it's touched, the next fruit will set to drag. if(n < 50) { n++; }else{ System.exit(0); } } return true; } Now, I'm thinking which part o line should I implement for the sound effects. My objectives to make SFX played once for every collision (Or should I say "SFX played once per collision"?) on the following: SFX played once if they hit on the objects of its kind. (e.g. apple vs. apple) SFX played once on a different sound when it hit on the ground. (e.g. apple land on the mud) Take note that I'm using Box2D for the Java programming version thanks to LibGDX via Box2D engine and I edited the physics body using Physics Body Editor before I implement it to code. I tried to check every available methods for body, fixture definition, or body definition to code for the SFX when hit but it seems only for the gravity and weight. Is there possibly available on the document for SFX played when collision happens if possible?

  Read the article

• How do I stop icons appearing on the desktop under conky?

  - by Seamus

  When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr}

  Read the article

• Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

  - by Amrutha

  Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows, --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 -- volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then -- c1:setFillColor(10,105,0) -- c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I ll try to frame the query better :). Thanks in advance.

  Read the article

• Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

  - by Amrutha

  Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows: --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 --volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then --c1:setFillColor(10,105,0) --c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I'll try to frame the query better :). Thanks in advance.

  Read the article

• efficient collision detection - tile based html5/javascript game

  - by Tom Burman

  Im building a basic rpg game and onto collisions/pickups etc now. Its tile based and im using html5 and javascript. i use a 2d array to create my tilemap. Im currently using a switch statement for whatever key has been pressed to move the player, inside the switch statement. I have if statements to stop the player going off the edge of the map and viewport and also if they player is about to land on a tile with tileID 3 then the player stops. Here is the statement: canvas.addEventListener('keydown', function(e) { console.log(e); var key = null; switch (e.which) { case 37: // Left if (playerX > 0) { playerX--; } if(board[playerX][playerY] == 3){ playerX++; } break; case 38: // Up if (playerY > 0) playerY--; if(board[playerX][playerY] == 3){ playerY++; } break; case 39: // Right if (playerX < worldWidth) { playerX++; } if(board[playerX][playerY] == 3){ playerX--; } break; case 40: // Down if (playerY < worldHeight) playerY++; if(board[playerX][playerY] == 3){ playerY--; } break; } viewX = playerX - Math.floor(0.5 * viewWidth); if (viewX < 0) viewX = 0; if (viewX+viewWidth > worldWidth) viewX = worldWidth - viewWidth; viewY = playerY - Math.floor(0.5 * viewHeight); if (viewY < 0) viewY = 0; if (viewY+viewHeight > worldHeight) viewY = worldHeight - viewHeight; }, false); My question is, is there a more efficient way of handling collisions, then loads of if statements for each key? The reason i ask is because i plan on having many items that the player will need to be able to pickup or not walk through like walls cliffs etc. Thanks for your time and help Tom

  Read the article

• The Solution

  - by Patrick Liekhus

  So I recently attended a class about time management as well as read the book “The Seven Habits of Highly Effective People” by Stephen Covey.  Both have been instrumental in helping me get my priorities aligned as well as keep me focused. The reason I bring this up is that it gave me a great idea for a small application with which to create a great technical stack solution that would be easy to demo and explain.  Therefore, the project from this point forward with be the Liekhus.TimeTracker application which will bring some the time management skills that I have acquired into a technical implementation.  The idea is rather simple, but leverages some of the basic principles of Covey along with some of the worksheets that I garnered from class.  The basics are as such: 1) a plan is a must have and 2) write it down!  A plan not written down is just an idea.  How many times have you had an idea that didn’t materialize?  Exactly.  Hence why I am writing it all down now! The worksheet consists of a few simple columns that I will outline below as well as some modifications that I made according to the Covey habits.  The worksheet looks like the following: Status Issue Area CQ Notes P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   P  F  L     1234   The idea is really simple and straightforward; you write down all your tasks and keep track of them along the way.  The status stands for (P)ending, (F)inished or (L)ater.  You write a quick title for the issue and select the CQ (Covey Quadrant) with which the issue occurs.  The notes section is for things that happen while you are working through the issue.  And last, but not least, is the Area column that I added as a way to identify the Role or Area of your life that this task falls within based upon Covey’s teachings. The second part of this application is a simple phone log that allows you to track your phone conversations throughout the day.  All of this is currently done on a sheet of paper, but being involved in technology, I want it to have bells and whistles.  Therefore, this is my simple idea for a project that will allow me to test my theories about coding and implementations.  Stay tuned as the next session will be flushing out the concept and coming up with user stories to begin the SCRUM process. Thanks

  Read the article

• Questions about identifying the components in MVC

  - by luiscubal

  I'm currently developing an client-server application in node.js, Express, mustache and MySQL. However, I believe this question should be mostly language and framework agnostic. This is the first time I'm doing a real MVC application and I'm having trouble deciding exactly what means each component. (I've done web applications that could perhaps be called MVC before, but I wouldn't confidently refer to them as such) I have a server.js that ties the whole application together. It does initialization of all other components (including the database connection, and what I think are the "models" and the "views"), receiving HTTP requests and deciding which "views" to use. Does this mean that my server.js file is the controller? Or am I mixing code that doesn't belong there? What components should I break the server.js file into? Some examples of code that's in the server.js file: var connection = mysql.createConnection({ host : 'localhost', user : 'root', password : 'sqlrevenge', database : 'blog' }); //... app.get("/login", function (req, res) { //Function handles a GET request for login forms if (process.env.NODE_ENV == 'DEVELOPMENT') { mu.clearCache(); } session.session_from_request(connection, req, function (err, session) { if (err) { console.log('index.js session error', err); session = null; } login_view.html(res, user_model, post_model, session, mu); //I named my view functions "html" for the case I might want to add other output types (such as a JSON API), or should I opt for completely separate views then? }); }); I have another file that belongs named session.js. It receives a cookies object, reads the stored data to decide if it's a valid user session or not. It also includes a function named login that does change the value of cookies. First, I thought it would be part of the controller, since it kind of dealt with user input and supplied data to the models. Then, I thought that maybe it was a model since it dealt with the application data/database and the data it supplies is used by views. Now, I'm even wondering if it could be considered a View, since it outputs data (cookies are part of HTTP headers, which are output)

  Read the article

• Managing accounts on a private website for a real-life community

  - by Smudge

  Hey Pro Webmasters, I'm looking at setting-up a walled-in website for a real-life community of people, and I was wondering if anyone has any experience with managing member accounts for this kind of thing. Some conditions that must be met: This community has a set list of real-life members, each of whom would be eligible for one account on the website. We don't expect or require that they all sign-up. It is purely opt-in, but we anticipate that many of them would be interested in the services we are setting up. Some of the community members emails are known, but some of them have fallen off the grid over the years, so ideally there would be a way for them to get back in touch with us through the public-facing side of the site. (And we'd want to manually verify the identity of anyone who does so). Their names are known, and for similar projects in the past we have assigned usernames derived from their real-life names. This time, however, we are open to other approaches, such as letting them specify their own username or getting rid of usernames entirely. The specific web technology we will use (e.g. Drupal, Joomla, etc) is not really our concern right now -- I am more interested in how this can be approached in the abstract. Our database already includes the full member roster, so we can email many of them generated links to a page where they can create an account. (And internally we can require that these accounts be paired with a known member). Should we have them specify their own usernames, or are we fine letting them use their registered email address to log-in? Are there any paradigms for walled-in community portals that help address security issues if, for example, one of their email accounts is compromised? We don't anticipate attempted break-ins being much of a threat, because nothing about this community is high-profile, but we do want to address security concerns. In addition, we want to make the sign-up process as painless for the members as possible, especially given the fact that we can't just make sign-ups open to anyone. I'm interested to hear your thoughts and suggestions! Thanks!

  Read the article

• Problems installing clamcour

  - by user10778

  Hello People, when i try to install clamcour from terminal, it gives me this error, somebody can help me? calmcourdir# ./configure checking for libraries containing socket functions... -lc checking for socket... yes checking for bind... yes checking for listen... yes checking for accept... yes checking for shutdown... yes checking for socklen_t... yes checking for struct sockaddr_un.sun_len... no System log functions checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for openlog... yes checking for syslog... yes checking for closelog... yes Time functions checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for localtime_r... yes checking for strftime... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for sysconf... yes BZip2 support checking bzlib.h usability... no checking bzlib.h presence... no checking for bzlib.h... no checking for BZ2_bzWriteOpen in -lbz2... no GZip support checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for gzopen in -lz... no LibClamAV support checking for /usr/bin/clamav-config... no checking for /usr/local/bin/courier-config... no checking for /usr/clamav/bin/clamav-config... no checking for /usr/local/clamav/bin/clamav-config... no ./configure: line 25234: : command not found configure: error: Cannot find clamav-config

  Read the article

• What's Bringing SharePoint 2007 Server to a hault?

  - by juanlarios

  I've been having issues with my teste environment and I'm hoping someone has run into this problem and can point me in the right direction. I noticed: SharePoint Server Memory is through the roof at times and so is the CPU usage. Most of CPU usage is a sql proccess. Running out of disk space all the time. I looked in the Logs located in the 12 hive and sure enough I have 1G log files that are hard to open because of the size. The following are the 3 error messages that are flooding my SharePoint logs:   04/05/2010 16:02:36.99     OWSTIMER.EXE (0x0B94)                       0x0BA4    Windows SharePoint Services       Timer                             5uuf    Monitorable    The previous instance of the timer job 'Variations Propagate Page Job Definition', id '{F9A73EB4-90FE-4574-AD99-B4034056F915}' for service '{F89169F9-707B-4588-9ED0-E6D399FE5E3D}' is still running, so the current instance will be skipped.  Consider increasing the interval between jobs.    04/05/2010 15:59:51.51     OWSTIMER.EXE (0x0B94)                       0x0BA4    Windows SharePoint Services       Timer                             5uuf    Monitorable    The previous instance of the timer job 'Profile Synchronization', id '{A05E3439-8DCD-449A-9D9E-46D601CACAA2}' for service '{F89169F9-707B-4588-9ED0-E6D399FE5E3D}' is still running, so the current instance will be skipped.  Consider increasing the interval between jobs.     04/05/2010 15:56:25.53     OWSTIMER.EXE (0x0B94)                       0x0BA4    Windows SharePoint Services       Timer                             5uuf    Monitorable    The previous instance of the timer job 'Scheduled Unpublish', id '{6298F93F-388D-46B9-809E-CEDBB8659661}' for service '{F89169F9-707B-4588-9ED0-E6D399FE5E3D}' is still running, so the current instance will be skipped.  Consider increasing the interval between jobs.     04/05/2010 15:54:14.73     OWSTIMER.EXE (0x0B94)                       0x0BA4    Windows SharePoint Services       Timer                             5uuf    Monitorable    The previous instance of the timer job 'Config Refresh', id '{C42DA970-3DA3-4AA2-94E5-8499C5B80A3E}' for service '{7F6D2CBE-8071-4A30-B313-7C9989FC2D87}' is still running, so the current instance will be skipped.  Consider increasing the interval between jobs.       I'm googling around but haven't found much. I know one other person posted something about this back in 2008, but no answers were reached. I have already checked the databases to see if any of them have gone offline for whatever reason, but from SQL everything is fine. I recently re-created an SSP and deleted an old ssp. So I thought maybe that was causing it, and who knows? maybe that causes some of the problems or maybe all. I'm running configuration wizard and see if anything changes. Please if someone has had similar issues let me know.

  Read the article

• Bootloader Problems Grub Won't Load Windows 7

  - by user108805

  I sent this to [email protected], still no response thought I could get a faster solution here. I am running Windows 7 64-bit and Ubuntu 12.04 LTS on separate partitions. The message is sent is: Boot-Repair URL: http://paste.ubuntu.com/1365163/ Originally I was unable to access Ubuntu after a windows update (Ubuntu was installed using wubi). Rather than logging into Ubuntu from the Windows 7 Bootloader, it lead to the grub command prompt. No matter what I did here, it would not log me into linux. As a result I uninstalled Ubuntu from the Add/Remove Programs application in Windows 7. I then re-installed Ubuntu 12.04 LTS using a liveCD-USB. This time however, I created a partition. I then restarted and got the GRUB bootloader which loads Ubuntu 12.04 LTS with no problems, however when I select windows (listed as "Windows 7 (loader)"), it just refreshes the grub bootloader instead of loading Windows 7. I then used the Windows 7 repair disk to run bootrec/fixmbr and bootrec/fixboot. This led to no bootloader coming up when I started my computer. Instead I got a blank black screen with a flashing white cursor. I went on to do a bootrec/buildbcd and bootrec/scanos. These did nothing to change the situation. When I ran bootrec/scanos it said that no Windows 7 installations were present. After this I decided to reinstall WIndows 7 only for this to do nothing to change the situation. Afterwards I did a boot-repair in which I began to get the GRUB bootloader, which would load ubuntu 12.04 LTS, but still would not load Windows 7. I also did a sudo update-grub which recognized Windows 7 as being installed, but still didn't fix the issue of loading Windows 7. While running Ubuntu I have no problem accessing my WIndows 7 partition which is formatted as NTFS. It shows all the files and folders reflecting that the re-install did take place, and it also shows all of my old applications and folders in the Windows.old folder. I am completely stuck at this point and have no clue what I should do next. Any help you can offer me will be greatly appreciate. Thank You --gap

  Read the article

• Sql Table Refactoring Challenge

  Ive been working a bit on cleaning up a large table to make it more efficient.  I pretty much know what I need to do at this point, but I figured Id offer up a challenge for my readers, to see if they can catch everything I have as well as to see if Ive missed anything.  So to that end, I give you my table: CREATE TABLE [dbo].[lq_ActivityLog]( [ID] [bigint] IDENTITY(1,1) NOT NULL, [PlacementID] [int] NOT NULL, [CreativeID] [int] NOT NULL, [PublisherID] [int] NOT NULL, [CountryCode] [nvarchar](10) NOT NULL, [RequestedZoneID] [int] NOT NULL, [AboveFold] [int] NOT NULL, [Period] [datetime] NOT NULL, [Clicks] [int] NOT NULL, [Impressions] [int] NOT NULL, CONSTRAINT [PK_lq_ActivityLog2] PRIMARY KEY CLUSTERED ( [Period] ASC, [PlacementID] ASC, [CreativeID] ASC, [PublisherID] ASC, [RequestedZoneID] ASC, [AboveFold] ASC, [CountryCode] ASC)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]) ON [PRIMARY] And now some assumptions and additional information: The table has 200,000,000 rows currently PlacementID ranges from 1 to 5000 and should support at least 50,000 CreativeID ranges from 1 to 5000 and should support at least 50,000 PublisherID ranges from 1 to 500 and should support at least 50,000 CountryCode is a 2-character ISO standard (e.g. US) and there is a country table with an integer ID already.  There are < 300 rows. RequestedZoneID ranges from 1 to 100 and should support at least 50,000 AboveFold has values of 1, 0, or 1 only. Period is a date (no time). Clicks range from 0 to 5000. Impressions range from 0 to 5000000. The table is currently write-mostly.  Its primary purpose is to log advertising activity as quickly as possible.  Nothing in the rest of the system reads from it except for batch jobs that pull the data into summary tables. Heres the current information on the database tables size: Design Goals This table has been in use for about 5 years and has performed very well during that time.  The only complaints we have are that it is quite large and also there are occasionally timeouts for queries that reference it, particularly when batch jobs are pulling data from it.  Any changes should be made with an eye toward keeping write performance optimal  while trying to reduce space and improve read performance / eliminate timeouts during read operations. Refactor There are, I suggest to you, some glaringly obvious optimizations that can be made to this table.  And Im sure there are some ninja tweaks known to SQL gurus that would be a big help as well.  Ill post my own suggested changes in a follow-up post for now feel free to comment with your suggestions. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Unable to connect to mail server via IMAP and roundcube

  - by mrhatter

  I am having trouble getting the final parts of my mail server up and working. I followed this tutorial to get everything set up on the mail server side. I have installed roundcube for webmail and configured it but it is saying "error connecting, connection refused" when attempting to connect to it using IMAP. This is thorough the "test imap" section of its installer. Also it is giving me an error message about perissions for it's log and temp folders but that's not as important as acutally getting mail to work. I have also tried connecting to the mail server using thunderbird however it cannot establish a connection either and I know my login information is correct. I know that the databases are working correctly based on the roundcube installer telling me that they have been "successfully initialized". Here are my firewall rules -A INPUT -i lo -j ACCEPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 25 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 465 -j ACCEPT -A INPUT -p tcp -m tcp --dport 487 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 993 -j ACCEPT -A INPUT -j DROP Which I set up in iptables. I have modified them from what I used in this tutorial I'm not sure what to try next. Any help would be wonderful! I am using Ubuntu 14.04 server, apache 2.4.7, roundcube 1.0.1, and the latest versions of dovecot and postfix. The email databases are contained in mysql. I am running this on a VPS server. UPDATE: I have changed from iptables to using ufw. I have run the following commands to set up a basic firewall with ufw. ufw default deny ufw allow ssh ufw allow http ufw allow https ufw allow imap ufw allow imaps ufw allow smtp I then used telnet to check all of the mail ports. But Port 993 isnt working even though ufw says both 993 and 993/tcp are open. What am I missing?

  Read the article

• System freezes while not in use, how do I fix this?

  - by PHLAK

  Bare with me, the following is a bit winded. I have Ubuntu 10.10 Desktop 64-bit installed on my laptop and up until a few weeks ago it has been running great. Then one day, while I was not using the laptop it froze. I was logged in as my user but had locked the screen locked and closed the lid. I didn't notice that it had frozen until I opened the lid and wiggled the mouse to try and log in. The screen remained black and I got no response. I immediately tried Alt + F2, F3, F4, etc. but got no response. The only thing I could do was hold the power button to power off the machine. The freezing has happened as quickly as within 10-20 minutes of the system being logged off and lid closed and as long as 4-6 hours. My machine is NOT configured to go into standby when plugged in and this has happened both on AC power and battery. Troubleshooting I have performed: I uninstalled programs I knew that I had installed between when it was working fine and having problems. Those programs were CrashPlan, Shutter and Conky. After uninstalling ALL of these programs the freezing still occurs. Next, I decided to SSH into the machine from my desktop and leave an htop and tail of the syslog running. Here are screenshots of the last thing shown on both when the system froze: htop, syslog Here is a dump of my syslog after another freeze. The freeze happened at 9:14 and I didn't notice it until about 10 minutes later and rebooted, hence the 10 minute gap from 9:14 to 9:24. In the above syslog dump I noticed a lot of NVRM: os_raise_smp_barrier(), invalid context! and upon investigating that message learned it was from the proprietary Nvidia driver I had installed. Thinking this could be part of the problem I uninstalled the Nvidia driver and reverted to using the Nouveau driver. The computer still froze after a few hours. Lastly, thinking the problem could be caused by overheating I used compressed air to blow out any dust in the CPU vents and all other openings on the laptop. None of the above troubleshooting has helped and the freezing still occurs. What other steps can I take to troubleshoot and/or fix this problem? Note: Yesterday X started to eat up a lot of CPU power and eventually froze my system while I was forwarding an X session over SSH (from another PC to my laptop). I'm unsure if this is related or not as it doesn't match any of the symptoms of the problem above. Aside from this, the system has never frozen while in use, even under heavy load. EDIT: I just ran Memtest86+ and it made it through two passes without any errors. Just eliminating possible causes here.

  Read the article

• How can I fix broken i915 drivers for Intel GPUs?

  - by Alen Mujezinovic

  I've got troubles getting the i915 drivers to work correctly on my laptop (HP Pavilion DM4 2101ea). Specifically, the laptop screen goes black and stays black after the splash graphic when booting both from USB key and from harddrive. To get anything on to the display after the splash screen I have to boot either with acpi=off nomodeset i915.modeset=0 I'd rather not turn ACPI off because I like my fans spinning and nomodeset is a bit overkill, so for now I'm booting with i915.modeset=0. Unfortunately, this turns off KMS and my current maximum resolution on the laptop screen is fixed to 1024x768 instead of its real capability. When not setting any of the above boot flags and I plug in an external monitor, the external monitor works fine. When booting with the flags, the external monitor works fine too, but can only do 1024x768 and can't do anything else than mirroring the laptop display. I did upgrade the i915 drivers from 2.17 that ship with Precise to 2.19 which are the most recent ones but without luck of getting anything to display. Here's my lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 08:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Here's lshw -C video *-display UNCLAIMED description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:c0000000-c03fffff memory:b0000000-bfffffff ioport:4000(size=64) Both outputs are generated after booting with i915.modeset=0. Here's a complete Xorg.log file from a boot into a black screen: https://gist.github.com/479ce06454e47d6123e1 The graphics card is a Intel HD 3000 integrated GPU. I've never had problems with Intel hardware on Ubuntu before so this is very surprising. If you could provide a method to make i915 work, suggest alternative drivers a way to boot with i915.modeset=0 but higher resolutions and KMS on or explain what is happening and how to fix it I'll give you an answer badge. :) Thanks

  Read the article

• 4.8M wasn't enough so we went for 5.055M tpmc with Unbreakable Enterprise Kernel r2 :-)

  - by wcoekaer

  We released a new set of benchmarks today. One is an updated tpc-c from a few months ago where we had just over 4.8M tpmc at $0.98 and we just updated it to go to 5.05M and $0.89. The other one is related to Java Middleware performance. You can find the press release here. Now, I don't want to talk about the actual relevance of the benchmark numbers, as I am not in the benchmark team. I want to talk about why these numbers and these efforts, unrelated to what they mean to your workload, matter to customers. The actual benchmark effort is a very big, long, expensive undertaking where many groups work together as a big virtual team. Having the virtual team be within a single company of course helps tremendously... We already start with a very big server setup with tons of storage, many disks, lots of ram, lots of cpu's, cores, threads, large database setups. Getting the whole setup going to start tuning, by itself, is no easy task, but then the real fun starts with tuning the system for optimal performance -and- stability. A benchmark is not just revving an engine at high rpm, it's actually hitting the circuit. The tests require long runs, require surviving availability tests, such as surviving crashes -and- recovery under load. In the TPC-C example, the x4800 system had 4TB ram, 160 threads (8 sockets, hyperthreaded, 10 cores/socket), tons of storage attached, tons of luns visible to the OS. flash storage, non flash storage... many things at high scale that all have to be perfectly synchronized. During this process, we find bugs, we fix bugs, we find performance issues, we fix performance issues, we find interesting potential features to investigate for the future, we start new development projects for future releases and all this goes back into the products. As more and more customers, for Oracle Linux, are running larger and larger, faster and faster, more mission critical, higher available databases..., these things are just absolutely critical. Unrelated to what anyone's specific opinion is about tpc-c or tpc-h or specjenterprise etc, there is a ton of effort that the customer benefits from. All this work makes Oracle Linux and/or Oracle Solaris better platforms. Whether it's faster, more stable, more scalable, more resilient. It helps. Another point that I always like to re-iterate around UEK and UEK2 : we have our kernel source git repository online. Complete changelog of the mainline kernel, and our changes, easy to pull, easy to dissect, easy to know what went in when, why and where. No need to go log into a website and manually click through pages to hopefully discover changes or patches. No need to untar 2 tar balls and run a diff.

  Read the article

• Alfa AWUS036H USB wireless adapter not recognized

  - by GFiasco

  The Alfa AWUS036H USB wireless adapter will not be recognized by my netbook (Ubuntu 14.04, Asus X201E). As I understand it, the drivers should already be built in to this version of Linux, but I tried a make/make install of the latest Realtek drivers (as mentioned on How do I install drivers for the Alfa AWUS036H USB wireless adapter?) and it didn't work. I then followed the advice of this thread (ALFA AWUS036NH driver) and did a make/make install of the most up-to-date backport of the drivers, but that didn't work. At this point I tried a series of commands from this thread (http://ubuntuforums.org/showthread.php?t=2187780) in an attempt to identify the problem, but at no point could I get the laptop to ever recognize the USB adapter. I have also troubleshot the USB cable itself, tried both the USB 2.0 and 3.0 ports on the laptop, have never received an error message regarding a need to update the firmware, and have seemingly successfully installed all manner of variation of Realtek drivers which were supposed to make the adapter work. (I also tried to delete/clean up after each install, in the hope I wasn't making things worse.) Not sure what I should do next. Please let me know if I need to post any more information. Thanks very much for your help. EDIT: Before inserting Alpha USB adapter: :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub After inserting Alpha USB adapter (USB 3.0 port, no change): :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Ran tail -f /var/log/syslog, inserted device, no recognition (last entry is dated 16:17:01, so an hour ago). Going to check on an Ubuntu 14.04 laptop and Windows XP desktop. I'll update after. Thanks for your help to this point.

  Read the article

• Problems building clamcour

  - by user10778

  Hello People, when i try to install clamcour from terminal, it gives me this error, somebody can help me? calmcourdir# ./configure checking for libraries containing socket functions... -lc checking for socket... yes checking for bind... yes checking for listen... yes checking for accept... yes checking for shutdown... yes checking for socklen_t... yes checking for struct sockaddr_un.sun_len... no System log functions checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for openlog... yes checking for syslog... yes checking for closelog... yes Time functions checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for localtime_r... yes checking for strftime... yes checking for unistd.h... (cached) yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking for sysconf... yes BZip2 support checking bzlib.h usability... no checking bzlib.h presence... no checking for bzlib.h... no checking for BZ2_bzWriteOpen in -lbz2... no GZip support checking zlib.h usability... no checking zlib.h presence... no checking for zlib.h... no checking for gzopen in -lz... no LibClamAV support checking for /usr/bin/clamav-config... no checking for /usr/local/bin/courier-config... no checking for /usr/clamav/bin/clamav-config... no checking for /usr/local/clamav/bin/clamav-config... no ./configure: line 25234: : command not found configure: error: Cannot find clamav-config

  Read the article

• Unknown C# keywords: params

  - by Chris Skardon

  Often overlooked, and (some may say) unloved, is the params keyword, but it’s an awesome keyword, and one you should definitely check out. What does it do? Well, it lets you specify a single parameter that can have a variable number of arguments. You what? Best shown with an example, let’s say we write an add method: public int Add(int first, int second) { return first + second; } meh, it’s alright, does what it says on the tin, but it’s not exactly awe-inspiring… Oh noes! You need to add 3 things together??? public int Add(int first, int second, int third) { return first + second + third; } oh yes, you code master you! Overloading a-plenty! Now a fourth… Ok, this is starting to get a bit ridiculous, if only there was some way… public int Add(int first, int second, params int[] others) { return first + second + others.Sum(); } So now I can call this with any number of int arguments? – well, any number > 2..? Yes! int ret = Add(1, 2, 3); Is as valid as: int ret = Add(1, 2, 3, 4); Of course you probably won’t really need to ever do that method, so what could you use it for? How about adding strings together? What about a logging method? We all know ToString can be an expensive method to call, it might traverse every node on a class hierarchy, or may just be the name of the type… either way, we don’t really want to call it if we can avoid it, so how about a logging method like so: public void Log(LogLevel level, params object[] objs) { if(LoggingLevel < level) return; StringBuilder output = new StringBuilder(); foreach(var obj in objs) output.Append((obj == null) ? "null" : obj.ToString()); return output; } Now we only call ‘ToString’ when we want to, and because we’re passing in just objects we don’t have to call ToString if the Logging Level isn’t what we want… Of course, there are a multitude of things to use params for…

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• Unable to configure/setup 5.1 audio with 12.04

  - by Vipin Vinayan

  I am kinda new to Ubuntu as well. I have been having this issue with audio for quite sometime now. Initially, when I installed version 11.10 (I guess), I was able to use my 5.1 speakers without any issues. If my memory serves me right, it was after an update that the 5.1 audio stopped working and the video resolution would not get saved. I temporarily fixed the resolution issue by creating a start-up shell script that would update the resolution and load it. But the issue with audio has been going on for quite sometime now. Even though I have option for 5.1, only two speakers seem to be working. I thought an upgrade should fix the issue and so upgraded the OS to version 12.04. I also tried uninstalling alsa and pulse audio, reinstalling them, changing the /etc/pulse/daemon.conf channels from 2 to 6. I have also tried installing pavucontrol but nothing seems to have worked and the issue still persists. Is there anything else you could suggest? The lspci log on my computer is as follows 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Would really appreciate a response that will assist me in resolving my issue. Thanks in advance Vipin

  Read the article

• dpkg crashing while trying to install a package

  - by Jonathan

  While attempting to install a package via apt-get the following. The first error I get is: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. And, if I run that command the box spins out of control and I get the following in /var/log/syslog Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398546] ------------[ cut here ]------------ Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398552] WARNING: at /build/buildd/linux-3.0.0/arch/x86/xen/multicalls.c:182 xen_mc_flush+01c0() Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398561] Modules linked in: acpiphp Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398568] Pid: 31063, comm: java Tainted: G D W 3.0.0-14-virtual #23-Ubuntu Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398576] Call Trace: Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398580] [<c0648265>] ? printk+0x2d/0x2f Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398586] [<c0150462>] warn_slowpath_common+0x72/0xa0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398593] [<c0104883>] ? xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398599] [<c0104883>] ? xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398605] [<c01504b2>] warn_slowpath_null+0x22/0x30 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398611] [<c0104883>] xen_mc_flush+0x1b3/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398617] [<c0104e7a>] ? xen_extend_mmu_update+0x4a/0x70 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398624] [<c0106565>] xen_set_pud_hyper+0x75/0x80 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398630] [<c01065b9>] xen_set_pud+0x49/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398636] [<c0132105>] pud_populate+0x45/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398642] [<c0208a24>] __pmd_alloc+0x74/0x90 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398648] [<c0208cb7>] handle_mm_fault+0x277/0x2c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.398655] [<c065f45b>] do_page_fault+0x15b/0x4a0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c020ba24>] ? remove_vma+0x44/0x60 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c020d9b6>] ? sys_mmap_pgoff+0x106/0x1c0 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c065f300>] ? vmalloc_fault+0x190/0x190 Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] [<c065c79f>] error_code+0x67/0x6c Aug 29 20:21:08 ip-10-202-191-4 kernel: [20571563.401923] ---[ end trace 0b105e2a179ad013 ]---

  Read the article

• Will you share your SQL Server configuration?

  - by Bill Graziano

  I regularly visit client sites and review their SQL Server configurations.  I come across all kinds of strange settings.  I’ve been thinking about a way to aggregate people’s configurations and see what’s common and what’s unique.  I used to do that with polls on SQLTeam.com.  I think we can find out more interesting things if we look at combinations of settings in relation to size and volume. I’ve been working on an application for another project that is similar.  It will be fairly easy to use that code for this.  I can have something up and running in a few days – if people are interested in it.  I admit that I often come up with ideas that just don’t make sense.  This may be one of them.  One of your biggest concerns has be how secure your data is.  My solution is not to store anything identifying.  The instance name and database names can both be “anonymized” and I don’t store the machine name or IP address or anything to do with logins. Some of the questions I’m curious about are: At what size database does the Enterprise Edition become prevalent? Given the total size of the databases how much RAM is common? How many people have multiple data files?  At what size does that become prevalent? How common is database mirroring?  Replication?  Log shipping? How common is full recovery mode?  At what data size does it become prevalent? I think those are all questions that are easy to answer -- with the right data.  The big question is whether or not people will share their SQL Server configurations.  I understand that organizations in regulated or high security environments can’t participate.  But I think that leaves many, many people that can.  Are you willing to share your configuration and learn about others?  I have a simple sign up form here.  It’s actually a mailing list signup that also captures your edition, number of servers and largest database.  The list will only be used for this project.  Is your SQL Server is configured correctly?  Do you wonder what the next step is as your data grows?  Take a second and sign up.

  Read the article

< Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >