Search Results

Search found 30046 results on 1202 pages for 'app themes'.

Page 534/1202 | < Previous Page | 530 531 532 533 534 535 536 537 538 539 540 541 | Next Page >

How should I deploy my JVM-based web application on ubuntu?

- by Pieter Breed

I've developed a web application using clojure/compojure (JVM based) and while developing I tested it using embedded jetty that runs on 0.0.0.0:8080. I would now like to deploy it to run on port 80 on ubuntu. I do dynamic virtual hosting, so any request for any host that arrives on port 80 should be handled by my application. The issues that worries me are: I can still run it embedded but I'm worried about running my app as root (needed for binding to port 80). I'm not sure if I can 'give up root' when in the JVM. Do I need to be concerned by this? besides, serving web applications is a known problem and I should be using known solutions for this (jetty or tomcat) but especially tomcat seems very heavy weight. Besides, I only have one application that listens to /* and does routing internally. (with compojure/ring). What I'm trying to say with this is that tomcat by default assigns WARs to subfolders which I don't want. So basically what I need is some very safe way of binding to port 80 on ubuntu that can with minimal interference send all requests to my app. Any ideas?

Read the article
Adjust output Brightness/Gamma/Colors in Gnome

- by Mikee

We have a desktop system running Ubuntu 8.04.4, and it is connected to a standard desktop LCD monitor. Unfortunately, in 8.04.4, the brightness of the image is cranked way up. It appears to be a graphics driver issue. Unfortunately, installing a newer GPU driver for this Intel GPU is very difficult to do. So, I am looking for a software (or config file?) solution to achieve this. Note: Ubuntu 9.10 and higher do not exhibit this issue, so this is not a hardware problem. Note: VNC-ing to this machine from another does not exhibit this issue either. Also, I installed "DisplayCalibrator.app", and it does not work very well (the app comes up, but the contents of the window are blank). Is there anything that I can add to the xorg.conf file to correct this issue? Also, this solution: http://superuser.com/questions/96539/adjust-contrast-and-brightness-in-ubuntu did not resove my issue. Thank you all for the help!

Read the article
JBoss https on port other than 8080 not working

- by MilindaD

We have a server with two JBoss instances where one runs on 8080, the other on 8081. We need to have HTTPS enabled for the 8081 server, firstly we tried enabling https on the 8080 port instance by generating the keystore and editing the server.xml and it successfully worked. However when we tried the same thing for 8081 it did not, note that we removed https for the 8080 server first before enabling it for 8081. This is what was used for both server.xml for 8080 and 8081. The only difference was that the port was changed from 8080 to 8081 when trying to enable https for 8081 port instance. What am I doing wrong and what needs to be changed? NOTE : When I meant enabled for 8080 I meant when you visit https:// URL:8484 you will actually be visiting the 8080 port instance. However when ssl is enabled for 8081 and I visit https:// URL:8484 I get that the web page is unavailable. COMMENTLESS VERSION <Server> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Service name="jboss.web">  <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/> <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" />  <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1"> <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" > <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" /> <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server> WITH COMMENTS VERSION <Server>  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Service name="jboss.web">  <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/>   <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" />  <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1">  <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" />  <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" >        <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" />  <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server>

Read the article
Nginx 502 Bad Gateway: It just won't stop

- by David

I have the same problem that most people seem to have with Nginx: 502 bad gateway errors. They are intermittent but typically happen more than once per session, which means my users are probably running into it nearly every time they use the app. I've tried adjusting fastcgi_buffers and fastcgi_buffer_size (in both directions) to no avail. I've tried various other things with the configuration file but nothing seems to work. Here's my config (note that I've stripped away most of the things I've tried, since they didn't work and I didn't want to bloat the file with a bunch of un-related directives): server { root /usr/share/nginx/www/; index index.php; # Make site accessible from http://localhost/ server_name localhost; # Pass PHP scripts to PHP-FPM location ~ \.php { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; } # Lock the site location / { auth_basic "Administrator Login"; auth_basic_user_file /usr/share/nginx/.htpasswd; } # Hide the password file location ~ /\. { deny all; } client_max_body_size 8M; } I'm running a small Rackspace cloud server, which should be plenty for handling an app with a small user base...

Read the article
What does this example bash startup script do?

- by Dimitri

I am trying to set up GNU Octave on my computer (Mac OS X 10.7.4). I am newbie in using Terminal and I need help to understand what the following script actually does: if [ -f ~/.bashrc ];then<br>        . ~/.bashrc<br> fi<br> PATH=$PATH:/usr/local/bin<br> BASH_ENV=~/.bashrc<br> export BASH_ENV PATH<br> export GNUTERM=aqua<br> alias octave="/Applications/Octave.app/Contents/Resources/bin/octave"<br> alias gnuplot="/Applications/Gnuplot.app/Contents/Resources/bin/gnuplot"<br> (taken from here: http://wikibox.stanford.edu/me112/index.php/Main/OctaveMatlabNotes) So this script begins with the simple conditional if statement. I don't understand the conditional expression - what is -f and .bashrc? What the statement . ~/.bashrc actually does? Then 2 variables are defined PATH and BASH_ENV. Why are they exported? Why GNUTERM=aqua is exported even if it's not defined anywhere? All I need is a script that would allow me to run Octave by simply typing octave in the terminal. I don't need an alias for the gnu plot. Thanks

Read the article
Moving a site from IIs6 to IIS7.5

- by Sukotto

I need to move a site off of IIS6 (Win Server 2003) and onto IIS7.5 (Win Server 2008) as soon as possible. Preferably tomorrow. The site itself is a delightful mix of classic asp (vbscript) and one-off asp.net (C#) applications (each asp.net app is in its own virtual dir and has a self-contained web.config). In case it's relevant, this is a sort of research site made up of 40 or 50 unconnected microsites. Each microsite is typically a simple form allowing a user to submit a form, which then runs a Stored Proc on a sqlserver db and displays a chart and/or table of the results. There is very little security to worry about. The database connection info is in a central file (in the case of the classic asp) or app's individual web.config (lots of duplication there) To add a little spice to the exercise... I have no idea how to admin IIS The company no longer employs the sysadmin or the guys who set this thing up. (They're not going to employ me much longer either but my sense of professional pride does not permit me to just walk away from this task). The servers are on mutually firewalled networks and I have to perform a convoluted, multi-step process to copy anything from one to the other. Would someone please point me to a crash-course tutorial for accomplishing the above? I have: a complete copy of the site's filesystem on the new box installed the 3rd party charting tool on the new system a config.xml file from the "all tasks - save configuration to a file" right click menu. There doesn't seem to be a way to import it on the new system however. The newer IIS manager has a completely different UI and I'm totally lost. Please help.

Read the article
Could I use Windows 7 instead of Windows SBS 2008 for this server?

- by Ecyrb

First off, I'm not a sys admin. I'm just a software developer trying to help out my parents' small business. Right now they have one server, a domain controller with a P4 processor running SBS 2003. They also have this machine hosting QuickBooks, MySQL for the old version of an app, and SQL Server 2008 Express for the new version of the app (which will replace the old eventually). They've been complaining about the workstations being slow so I figured it might help if they bought a new server and moved QuickBooks, MySQL, and SQL Server to the new server, leaving the old server as just a DC. In trying to pick an operating system for their new server, I was thinking about Windows SBS 2008 Standard with enough licenses for seven machines. But that's a lot more money than they're going to want to spend. So then I wondered if there's any real advantage to having a server OS as opposed to just throwing Windows 7 on the new server. It's a lot cheaper and I can't think of any SBS features that it would need if it's just hosting QuickBooks, MySQL, and SQL Server. Would it be okay to use Windows 7 for a server like this? Are there any advantages to using SBS 2008 that I would be missing out on? Any additional tips are much appreciated!

Read the article
jdbc4 CommunicationsException

- by letronje

I have a machine running a java app talking to a mysql instance running on the same instance. the app uses jdbc4 drivers from mysql. I keep getting com.mysql.jdbc.exceptions.jdbc4.CommunicationsException at random times. Here is the whole message. Could not open JDBC Connection for transaction; nested exception is com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: The last packet successfully received from the server was25899 milliseconds ago.The last packet sent successfully to the server was 25899 milliseconds ago, which is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'autoReconnect=true' to avoid this problem. For mysql, the value of global 'wait_timeout' and 'interactive_timeout' is set to 3600 seconds and 'connect_timeout' is set to 60 secs. the wait timeout value is much higher than the 26 secs(25899 msecs). mentioned in the exception trace. I use dbcp for connection pooling and here is spring bean config for the datasource. <bean id="dataSource" destroy-method="close" class="org.apache.commons.dbcp.BasicDataSource" > <property name="driverClassName" value="com.mysql.jdbc.Driver"/> <property name="url" value="jdbc:mysql://localhost:3306/db"/> <property name="username" value="xxx"/> <property name="password" value="xxx" /> <property name="poolPreparedStatements" value="false" /> <property name="maxActive" value="3" /> <property name="maxIdle" value="3" /> </bean> Any idea why this could be happening? Will using c3p0 solve the problem ?

Read the article
Windows Server Connected to Domain Without Being Domain Controller

- by saluce

Can a Windows Server be connected to an Active Directory domain without being a domain controller? Here's the scenario: I want to use Windows Server 2012 to run several virtual machines for testing our web application in a variety of environments. We have a corporate domain, and I'd like to use the corporate login (or at least a common login) on each of the virtual machines without necessarily having to get IT to set up each virtual machine on the corporate domain. Also, I need the server itself to be able to authenticate domain logins (the app uses domain login information for users to login). However, I absolutely do NOT want it to be a DC on the corporate network. Thus, my questions: Can a Windows Server be connected to an Active Directory domain without being a DC? Can a Windows Server authenticate users on another domain without being a part of that domain? Can a Windows Server be a domain controller in a small network (comprised of just the server and itself) and use the corporate domain's Active Directory for authenticating user logins to the server, the web app, and the virtual machines?

Read the article
How do I keep a table in Sync across 4 db's to be used in SQL Replication Filtering?

- by Refracted Paladin

I have a Win Form, Data Entry, application that uses 4 seperate Data Bases. This is an occasionally connected app that uses Merge Replication (SQL 2005) to stay in Sync. This is working just fine. The next hurdle I am trying to tackle is adding Filters to my Publications. Right now we are replicating 70mbs, compressed, to each of our 150 subscribers when, truthfully, they only need a tiny fraction of that. Using Filters I am able to accomplish this(see code below) but I had to make a mapping table in order to do so. This mapping table consists of 3 columns. A PrimaryID(Guid), WorkerName(varchar), and ClientID(int). The problem is I need this table present in all FOUR Databases in order to use it for the filter since, to my knowledge, views or cross-db query's are not allowed in a Filter Statement. What are my options? Seems like I would set it up to be maintained in 1 Database and then use Triggers to keep it updated in the other 3 Databases. In order to be a part of the Filter I have to include that table in the Replication Set so how do I flag it appropriately. Is there a better way, altogether? SELECT <published_columns> FROM [dbo].[tblPlan] WHERE [ClientID] IN (select ClientID from [dbo].[tblWorkerOwnership] where WorkerID = SUSER_SNAME()) Which allows you to chain together Filters, this next one is below the first one so it only pulls from the first's Filtered Set. SELECT <published_columns> FROM [dbo].[tblPlan] INNER JOIN [dbo].[tblHealthAssessmentReview] ON [tblPlan].[PlanID] = [tblHealthAssessmentReview].[PlanID] P.S. - I know how illogical the DB structure sounds. I didn't make it. I inherited it and was then told to make it a "disconnected app."

Read the article
SQL Server 2008 login problem with ASP.NET application: Failed to open the explicitly specified database

- by eulerfx

I am running SQL Server 2008 Express Edition on Windows Server 2008 with an ASP.NET application which must access the server. The ASP.NET application is associated with an application pool that runs on the NetworkService account. This account in turn has a Login and User record on SQL Server in the required database. When I attempt to run the ASP.NET website I get a blank page and when viewed in the error log, I seem to be getting this information event record: Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Failed to open the explicitly specified database. [CLIENT: myLocalMachine] The connection string has Trusted_Connection=True; and the required database specified. When I explicitly specify the user name and password I get another login error stating the password is incorrect, even though the same un/pw combination works through SQL Server Management studio. The NETWORK SERVICE account seems to have all the required privileges for the database. Also, I made a test ASP.NET website project which does a simple select from a table in that database, and using the same config file I am not getting the error and it seems to work. Is it something to do with trust levels then, because the original ASP.NET web app references various DLLs including open source libraries. Also, the application does not seem to be able to write to the event log itself, throwing a security exception, even though everything in the config files, including machine.config states the app is in full trust.

Read the article
Remote Desktop Zooming

- by codeulike

Using Remote Desktop from a device with a hi-res screen (say, a Surface Pro) is decidedly tricky - as everything displays 1:1 scale and so looks tiny. If the machine you are remoting into runs Server 2008 R2 or later, you can change the dpi zooming setting (see here). But for older hosts, that doesn't work. Using normal Remote Desktop, you can connect with a lower resolution, say 1280x768, and turn on smart-sizing. However smart-sizing can scale down (to display a huge desktop in a small area) but does not seem to scale up (to display a small desktop in a big area). Using the Windows 8 Remote Desktop App, you can zoom - but you cannot set the default resolution of the host. What I want is a lower resolution in the host, scaled up to fit my screen. So both of those are close to what I want, but dont quite work. So question is: Does the Remote Desktop App allow screen resolution to be set somehow? Is there some other Remote Desktop client that can handle zooming better?

Read the article
Weird rendering artefact in vim (terminal, not MacVim)

- by Tobi Lehman

Running Mac OS X, using either Terminal.app or iTerm2, there is a strange artefact with the character rendering that I have a hard time explaining and an even harder time understanding. I'll start with a video of my screen so that you can see and example of it in action: From the video you can see a few ways it is weird, for example, sometimes when I hit a letter in insert mode, the character is double printed. When I go into normal mode, the artefact remains. When I re-enter insert mode, hitting backspace copies the characters on the left to the position under the cursor. This has happened in OS X Lion, and Mountain Lion, under both Terminal.app and iTerm 2. This never happens under MacVim. Also, I use GNU/Linux on my other machine, and have never had this happen, I am pretty sure it is strictly a Mac OS X issue, but I do not know how to fix it. For a while, I've been working around it by using MacVim most of the time, but I prefer working in a terminal. Does anyone know what is happening here, and if so, how can I fix it? EDIT: I tried using the macvim Vim executable, and I still get strange artefacts, but they are localized to the left side of the screen, here is an example:

Read the article
Windows thinks outgoing connections are incoming connections?

- by Slayer537

I have a rather weird issue.. I'm trying to configure Windows Firewall to block all outgoing connections to a certain app, but allow all incoming. This app is used to transfer files across a network. The reason for this type of setup is to only allow certain users (IP Address) access to the files I have, but to still allow others to see what's available. Since Windows Firewall defaults to allowing all outgoing connections, I made a rule to deny all outgoing connections that were not in the IP ranges I specified. For the incoming connections, I'd like to leave it at allow all, but at the moment it is set to only allow the connections that also have outgoing permissions set. If I blanket say allow all incoming connections, I observe that unauthorized IP Address are able to actually download files, even though their IP was blocked in the outgoing connections. To shed a little more visibility on this, I used NetLimiter to see what was going on. NetLimiter showed me that the connection was an incoming connection. Shouldn't this be an outgoing connection, as I am uploading files to them, not the other way around? Is there a way to make the connection type be correct and show up as outgoing instead of incoming?

Read the article
32bit dll not loading with Enable 32 Bit Applications on IIS 7.5

- by Jon

I have a MVC 3 Web Site referencing a 32 bit DLL. The OS is Windows 2008 R2 x64. The website is in the ASP.NET 4 App Pool. I have turned on Enable32Bit but it doesn't work. I get a Bad Image Exception but can't find out to turn this level of logging on in IIS. I have setup up a page that outputs whether it's running 32bit or 64bit and when I turn on/off the Enable32Bit on the AppPool I get the correct output. The website is also in Full Trust. I'm at a loss to try and and get it to work. I do know that it works on Win7 32bit. Can you suggest some things to try? UPDATE: I have just written a simple Windows Forms App with a button on it which calls my DLL. This was built with target of x86 and it worked fine so there is an issue with IIS or ASP.Net I think. UPDATE 2: Does it matter if the ASP.Net Pipeline is Clasic or Integrated? I've tried both but same problem but thought it was worth asking UPDATE 3: I found this question trying to do the same thing and he gave up which isnt too helpful!!

Read the article
How to disable Utility Manager (Windows Key + U)

- by Skizz

How do I disable the Windows + U hotkey in Windows XP? Alternatively, how do I stop the utility manager from being active? The two are related. The utilty manager is currently providing a potential security hole and I need to remove it[1]. The system I'm developing uses a custom Gina to log in and start a custom shell. This removes most Windows Key hotkeys but the Win + U still pops up the manager app. Update: Things I've tried and don't work: NoWinKeys registry setting - this only affects explorer hotkeys; Renaming utilman.exe - program reappears next login; Third party software - not really an option, these machines are audited by the clients and additional, third party software would be unlikely to be accepted. Also, the proedure needs to be reasonably straightforward - this has to be done by field service engineers to existing machines (machines currently in Russia, Holland, France, Spain, Ireland and USA). [1] The hole is via the internet options in the help viewer the utility app links to.

Read the article
windows: force user to use specific network adapter

- by Chad

I'm looking for a configuration/hack to force a particular application or all traffic from a particular user to use a specific NIC. I have an legacy client/server app that has a "security feature" that limits connections based on IP address. I'm trying to find a way to migrate this app to a terminal server environment. The simple solution is for the development team to update the code in the application, however in this case that's not an option. I was thinking I might be able to install VMware NIC's installed for each user on the terminal server and do some type of scripting to force that user account to use a specific NIC. Anybody have any ideas on this? EDIT 1: I think I have a hack to work around my specific problem, however I'd love to hear of a more elegant solution. I got lucky in that the software reads the server IP address out of a config file. So I'm going to have to make a config file for each user and make a customer programs files for each user. Then add a VMware NIC for each user and make each server IP address reside on a different subnet. That will force the traffic for a particular user to a particular IP address, however its really messy and all the VM NIC's will slow down the terminal server. I'll setup a proof of concept Monday and let the group know how it affects performance.

Read the article
Hyper-v and sql server connections for web apps

- by Rick Ratayczak

I have a physical machine running win8, and two VMs in hyper-v client: 1 web server, 1 sql server. The web server works fantastic. The sql is the one that is giving me the problem. I can connect to it with server explorer in visual studio or management studio just fine, and it's blazing fast. The problem happens when I use the same connection string I am using in visual studio server explorer in the web.config for an app. data source=VMSQL1;initial catalog=OtherShell;persist security info=True;user id=OtherShell;password=****;network library=dbmssocn;MultipleActiveResultSets=True;App=EntityFramework I made sure it was also using tcp-ip, but it doesn't connect with or without the network library part of the connection string. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) This is driving my batty for the last two days, any ideas? It fails from the web vm too, but works in management studio with the same connection string.

Read the article
Why is there no /usr/bin/ in windows? Would it be dangerous to the entire Program Files to the path?

- by dotancohen

I am a Linux user spending some time in Windows and I'm trying to understand some of the Windows paradigms instead of fighting them. I notice that each program installed in the traditional manner (i.e. via orgasmic installers: Yes, Yes, Yes, Finish) adds the executables to C:/Program Files/foo/bar.exe and then adds a shortcut to the Desktop / Start Menu containing the entire path. However, there is no common directory with links to the software, i.e. C:/bin/bar.exe which would link to C:/Program Files/foo/bar.exe. Therefore, after installing an application the only way to use the application is via the clicky-clicky menus or by navigating to the executable in the filesystem. One cannot simply Win-R to open the run dialogue and then type bar or bar.exe as is possible with notepad or mspaint. I realize that Windows 8 improves on this with the otherwise horrendous Start Screen which does support typing the name of the app, but again this depends on the app having registered itself for such. Would I be doing any harm by adding C:/Program Files recursively to the Windows path? I do realize that there will be name collisions (i.e. uninstall.exe) but could there be other issues?

Read the article
How does Safari's Reader work and when does it show up?

- by TestSubject528491

Safari's Reader feature is a cool little app that displays a web page as a newspaper article --- without all the distracting sidebars, comments, and ads. Sometimes it works and sometimes it doesn't, and I'm wondering how "it knows when to show up." On my personal website, one of the pages has this option. You can click the Reader button in the URL bar and it is displayed beautifully like a page in an iBook. However, none of my other web pages (on the same site) do this. I thought it had something to do with the <article> tag, but I removed that and it still works. Anyone know how this app works? Also, does anyone know of any Chrome extensions that are just like this? Google Reader is not the same thing. PS: From the cited Apple website: Safari Reader As you browse the web, Safari detects if you are on a web page with an article. Click the Reader button that appears in the Smart Address Field and an elegant view of the article appears — without any distracting content. Not much help, is it?

Read the article
What does this error mean in my IIS7 Failed Request Tracing report?

- by Pure.Krome

when I attempt to goto any page in my web application (i'm migrating the code from an asp.net web site to web application, and now testing it) .. i keep getting some not authenticated error(s) . So, i've turned on FREB and this is what it says... I'm not sure what that means? Secondly, i've also made sure that my site (or at least the default document which has been setup to be default.aspx) has anonymous on and the rest off. Proof: - C:\Windows\System32\inetsrv>appcmd list config "My Web App/default.aspx" -section:anonymousAuthentication <system.webServer> <security> <authentication> <anonymousAuthentication enabled="true" userName="IUSR" /> </authentication> </security> </system.webServer> C:\Windows\System32\inetsrv>appcmd list config "My Web App" -section:anonymousAuthentication <system.webServer> <security> <authentication> <anonymousAuthentication enabled="true" userName="IUSR" /> </authentication> </security> </system.webServer> Can someone please help?

Read the article
Using Truecrypt to secure mySQL database, any pitfalls?

- by Saul

The objective is to secure my database data from server theft, i.e. the server is at a business office location with normal premises lock and burglar alarm, but because the data is personal healthcare data I want to ensure that if the server was stolen the data would be unavailable as encrypted. I'm exploring installing mySQL on a mounted Truecrypt encrypted volume. It all works fine, and when I power off, or just cruelly pull the plug the encrypted drive disappears. This seems a load easier than encrypting data to the database, and I understand that if there is a security hole in the web app , or a user gets physical access to a plugged in server the data is compromised, but as a sanity check , is there any good reason not to do this? @James I'm thinking in a theft scenario, its not going to be powered down nicely and so is likely to crash any DB transactions running. But then if someone steals the server I'm going to need to rely on my off site backup anyway. @tomjedrz, its kind of all sensitive, individual personal and address details linked to medical referrals/records. Would be as bad in our field as losing credit card data, but means that almost everything in the database would need encryption... so figured better to run the whole DB in an encrypted partition. If encrypt data in the tables there's got to be a key somewhere on the server I'm presuming, which seems more of a risk if the box walks. At the moment the app is configured to drop a dump of data (weekly full and then deltas only hourly using rdiff) into a directory also on the Truecrypt disk. I have an off site box running WS_FTP Pro scheduled to connect by FTPs and synch down the backup, again into a Truecrypt mounted partition.

Read the article
proxy pass domain FROM default apache port 80 TO nginx on another port

- by user10580

Im still learning server things so hope the title is descriptive enough. Basically i have sub.domain.com that i want to run on nginx at port 8090. I want to leave apache alone and have it catch all default traffic at port 80. so i am trying something with a virtual name host to proxy pass to sub.domain.com:8090, nothing working yet and go no idea what the right syntax could be. any ideas? most of what i found was to pass TO apache FROM nginx, but i want to the do the opposite. LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_http_module modules/mod_proxy_http.so <VirtualHost sub.domain.com:80> ProxyPreserveHost On ProxyRequests Off ServerName sub.domain.com DocumentRoot /home/app/public ServerAlias sub.domain.com proxyPass / http://appname:8090/ (also tried localhost and sub.domain.com) ProxyPassReverse / http://appname:8090/ </VirtualHost> when i do this i get [warn] module proxy_module is already loaded, skippin [warn] module proxy_http_module is already loaded, skipping [error] (EAI 2)Name or service not known: Could not resolve host name sub.domain.com -- ignoring! and yes, the app is working (i have it running on port 80 with another subdomain) and it works at sub.domain.com:8090

Read the article
nginx with fail2ban and mod_security

- by Mahesh

I forgot to update my fail2ban config for nginx. I just moved to nginx from apache. Today, I got a lot of cals from a single IP. IP tried to access login pages with post and get methods IP tried to use nginx as a proxy (GET http:/...) IP searched images, js, css folders IP tried to inject -d url_allow_fopen =1 and something similar. Most of the calls ended with 404. http { limit_req_zone $binary_remote_addr zone=app:10m rate=5r/s; ... server { ... location / { limit_req zone=app burst=50; } I got approximately 50 requests from that ip for a second. So i updated my nginx like the above. Will it avoid too many connections per second now? I have updated my fail2ban jail.local to support nginx. I am confused with the nginx-noscript.conf [Definition] failregex = ^<HOST> -.*GET.*(\.php|\.asp|\.exe|\.pl|\.cgi|\scgi) ignoreregex = I am serving php with nginx. I checked apache's noscript.conf and which has .php extension on it too. I tested this above settings before restarting fail2ban and got thousands of ips matched. I removed php and nothing matched. Do i need .php| in nginx-noscript.conf? Using mod_security and fail2ban together bring any problem? When i was searching today, i came to know mod_security is available for nginx too. So i am planning to use it too.

Read the article
Remote reboot of windows to knoppix

- by user64452

I am attempting to develop an Auditing application. This audit application will be employed on windows networks. The Audit will need to discover Hardware and software details of all machines attached to the network (including Printers) I do not want to have to install this application on each workstation. The audit app. needs to discover all the ip addresses of all the networked workstations. I have been prototyping this app for the last couple of months and have decided to try a new tack Is this possible? a). You have a windows network, min Windows XP sp3 and upwards b). Maximum of 100 Networked machines (if that matters) c). I need to remotely reboot each WINDOWS machine in turn on the entire network and get it to startup using UNIX, say knoppix for example! d). however the knoppix live cd is only available from one of the networked machines Questions... Morphology? Longevity? Incept dates? Cheers DD

Read the article

< Previous Page | 530 531 532 533 534 535 536 537 538 539 540 541 | Next Page >