Search Results

Search found 20045 results on 802 pages for 'reporting services 2005'.

Page 535/802 | < Previous Page | 531 532 533 534 535 536 537 538 539 540 541 542  | Next Page >

  • Finding the Value in SOA by Stephen Bennett

    - by J Swaroop
    Here's an excerpt from a very interesting article on CIO update titled "Finding the value in SOA" by Stephen Bennett of Oracle "Because of this, SOA must not be seen as a solution development approach that starts and ends once a solution is delivered. It must be seen as an on-going process that, when coupled with a strategic framework, can change and evolve with the business over time. Unfortunately, many enterprises adopt SOA without utilizing a strategic framework, causing a host of challenges for their business. Just a few of the challenges I have seen include: More complexity and moving parts Increased costs Projects taking longer than before Solutions more fragile than ever Little or no agility Difficulty identifying and discovering services Exponentially growing governance challenges Limited service re-use Duplication of effort leading to service sprawl Multiple siloed technology focused SOAs Funding for service oriented projects being cut" Read the complete article

    Read the article

  • Make your CHM Help Files show HTML5 and CSS3 content

    - by Rick Strahl
    The HTML Help 1.0 specification aka CHM files, is pretty old. In fact, it's practically ancient as it was introduced in 1997 when Internet Explorer 4 was introduced. Html Help 1.0 is basically a completely HTML based Help system that uses a Help Viewer that internally uses Internet Explorer to render the HTML Help content. Because of its use of the Internet Explorer shell for rendering there were many security issues in the past, which resulted in locking down of the Web Browser control in Windows and also the Help Engine which caused some unfortunate side effects. Even so, CHM continues to be a popular help format because it is very easy to produce content for it, using plain HTML and because it works with many Windows application platforms out of the box. While there have been various attempts to replace CHM help files CHM files still seem to be a popular choice for many applications to display their help systems. The biggest alternative these days is no system based help at all, but links to online documentation. For Windows apps though it's still very common to see CHM help files and there are still a ton of CHM help out there and lots of tools (including our own West Wind Html Help Builder) that produce output for CHM files as well as Web output. Image is Everything and you ain't got it! One problem with the CHM engine is that it's stuck with an ancient Internet Explorer version for rendering. For example if you have help content that uses HTML5 or CSS3 content you might have an HTML Help topic like the following shown here in a full Web Browser instance of Internet Explorer: The page clearly uses some CSS3 features like rounded corners and box shadows that are rendered using plain CSS 3 features. Note that I used Internet Explorer on purpose here to demonstrate that IE9 on Windows 7 can properly render this content using some of the new features of CSS, but the same is true for all other recent versions of the major browsers (FireFox 3.1+, Safari 4.5+, WebKit 9+ etc.). Unfortunately if you take this nice and simple CSS3 content and run it through the HTML Help compiler to produce a CHM file the resulting output on the same machine looks a bit less flashy: All the CSS3 styling is gone and although the page display and functionality still works, but all the extra styling features are gone. This even though I am running this on a Windows 7 machine that has IE9 that should be able to render these CSS features. Bummer. Web Browser Control - perpetually stuck in IE 7 Mode The problem is the Web Browser/Shell Components in Windows. This component is and has been part of Windows for as long as Internet Explorer has been around, but the Web Browser control hasn't kept up with the latest versions of IE. In a nutshell the control is stuck in IE7 rendering mode for engine compatibility reasons by default. However, there is at least one way to fix this explicitly using Registry keys on a per application basis. The key point from that blog article is that you can override the IE rendering engine for a particular executable by setting one (or more) registry flags that tell the Windows Shell which version of the Internet Explorer rendering engine to load. An application that wishes to use a more recent version of Internet Explorer can then register itself during installation for the specific IE version desired and from then on the application will use that version of the Web Browser component. If the application is older than the specified version it falls back to the default version (IE 7 rendering). Forcing CHM files to display with IE9 (or later) Rendering Knowing that we can force the IE usage for a given process it's also possible to affect the CHM rendering by setting same keys on the executable that's hosting the CHM file. What that executable file is depends on the type of application as there are a number of ways that can launch the help engine. hh.exeThe standalone Windows CHM Help Viewer that launches when you launch a CHM from Windows Explorer. You can manually add hh.exe to the registry keys. YourApplication.exeIf you're using .NET or any tool that internally uses the hhControl ActiveX control to launch help content your application is your host. You should add your application's exe to the registry during application startup. foxhhelp9.exeIf you're building a FoxPro application that uses the built-in help features, foxhhelp9.exe is used to actually host the help controls. Make sure to add this executable to the registry. What to set You can configure the Internet Explorer version used for an application in the registry by specifying the executable file name and a value that specifies the IE version desired. There are two different sets of keys for 32 bit and 64 bit applications. 32 bit only or 64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe 32 bit on 64 bit machine: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe Note that it's best to always set both values ideally when you install your application so it works regardless of which platform you run on. The value specified is a DWORD value and the interesting values are decimal 9000 for IE9 rendering mode depending on !DOCTYPE settings or 9999 for IE 9 standards mode always. You can use the same logic for 8000 and 8888 for IE8 and the final value of 7000 for IE7 (one has to wonder what they're going todo for version 10 to perpetuate that pattern). I think 9000 is the value you'd most likely want to use. 9000 means that IE9 will be used for rendering but unless the right doctypes are used (XHTML and HTML5 specifically) IE will still fall back into quirks mode as needed. This should allow existing pages to continue to use the fallback engine while new pages that have the proper HTML doctype set can take advantage of the newest features. Here's an example of how I set the registry keys in my Tarma Installmate registry configuration: Note that I set all three values both under the Software and Wow6432Node keys so that this works regardless of where these EXEs are launched from. Even though all apps are 32 bit apps, the 64 bit (the default one shown selected) key is often used. So, now once I've set the registry key for hh.exe I can now launch my CHM help file from Explorer and see the following CSS3 IE9 rendered display: Summary It sucks that we have to go through all these hoops to get what should be natural behavior for an application to support the latest features available on a system. But it shouldn't be a surprise - the Windows Help team (if there even is such a thing) has not been known for forward looking technologies. It's a pretty big hassle that we have to resort to setting registry keys in order to get the Web Browser control and the internal CHM engine to render itself properly but at least it's possible to make it work after all. Using this technique it's possible to ship an application with a help file and allow your CHM help to display with richer CSS markup and correct rendering using the stricter and more consistent XHTML or HTML5 doctypes. If you provide both Web help and in-application help (and why not if you're building from a single source) you now can side step the issue of your customers asking: Why does my help file look so much shittier than the online help… No more!© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5  Help  Html Help Builder  Internet Explorer  Windows   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Silverlight 5 Hosting :: Features in Silverlight 5 and Release Date

    - by mbridge
    Silverlight 5 is finally announced in the Silverlight FireStarter Event on the 2nd December, 2010. This new version of Silverlight which was earlier labeled as 'Future of Microsoft Silverlight' has now come much closer to go live as the first Silverlight 5 Beta version is expected to be shipped during the early months of 2011. However for the full fledged and the final release of Silverlight 5, we have to wait many more months as the same is likely to be made available within the Q3 2011. As would have been usually expected, this latest edition would feature many new capabilities thereby extending the developer productivity to a whole new dimension of premium media experience and feature-rich business applications. It comes along with many new feature updates as well as the inclusion of new technologies to improve the standard of the Silverlight applications which are now fine-tuned to produce next generation business and media solutions that is capable to meet the requirements of the advanced web-based app development. The Silverlight 5 is all set to replace the previous fourth version which now includes more than forty new features while also dropping various deprecated elements that was prevalent earlier. It has brought around some major performance enhancements and also included better support for various other tools and technologies. Following are some of the changes that are registered to be available under the Silverlight 5 Beta edition which is scheduled to be launched during the Q1 2011. Silverlight 5 : Premium Media Experiences The media features of Silverlight 5 has seen some major enhancements with a lot of optimizations being made to deliver richer solutions. It's capability has now been extended to make things easier, faster and capable of performing the desired tasks in the most efficient manner. The Silverlight media solutions has already been a part of many companies in the recent days where various on-demand Silverlight services were featured but with the arrival of the next generation premium media solution of Silverlight 5, it is expected to register new heights of success and global user acclamation for using it with many esteemed web-based projects and media solutions. - The most happening element in the new Silverlight 5 will be its support for utilizing the GPU based hardware acceleration which is intended to lower down the CPU load to a significant extent and thereby allowing faster rendering of media contents without consuming much resources. This feature is believed to be particularly helpful for low configured machines to run full HD media content without any lagging caused due to processor load. It will hence be one great feature to revolutionize the new generation high quality media contents to be available within the web in a more efficient manner with its hardware decoded video playback capabilities. - With the inclusion of hardware video decoding to minimize the processor load, the Silverlight 5 also comes with another optimization enhancement to also reduce the power consumption level by making new methods to deal with the power-saver settings. With this optimization in effect, the computer would be automatically allowed to switch to sleep mode while no video playback is in progress and also to prevent any screensavers to popup and cause annoyances during any video playback. There would also be other power saver options which will be made available to best suit the users requirements and purpose. - The Silverlight trickplay feature is another great way to tweak any silverlight powered media content as is used for many video tutorial sites or for dealing with any sort of presentations. This feature enables the user to modify the playback speed to either slowdown or speedup during the playback durations based on the requirements without compromising on the quality of output. Normally such manipulations always makes the content's audio to go off-pitch, but the same will not be the case with TrickPlay and the audio would seamlessly progress with the video without skipping any of its part. - In addition to all of the above, the new Silverlight 5 will be featuring wireless control of all the media contents by making use of remote controllers. With the use of such remote devices, it will be easier to handle the various media playback controls thereby providing more freedom while experiencing the premium media services. Silverlight 5 : Business Application Development The application development standard has been extended with more possibilities by bringing forth new and useful technologies and also reviving the existing methods to work better than what it was used to. From the UI improvements to advanced technical aspects, the Silverlight 5 scores high on all grounds to produce great next generation business delivered applications by putting in more creativity and resourceful touch to all the apps being produced with it. - The WPF feature of Silverlight is made more effective by introducing new standards of Databinding which is intended to improve the productivity standards of the Silverlight application developer. It brings in a lot of convenience in debugging the databinding components or expressions and hence making things work in a flawless manner. Some additional features related to databinding includes that of Ancestor RelativeSource, Implicit DataTemplates and Model View ViewModel (MVVM) support with DataContextChanged event and many other new features relating it. - It now comes with a refined text and printing service which facilitates better clarity of the text rendering and also many positive changes which are being applied to the layout pattern. New supports has been added to include OpenType font, multi-column text, linked-text containers and character leading support to name a few among the available features.This also includes some important printing aspects like that of Postscript Vector Printing API which allows to program our printing tasks in a user defined way and Pivot functionality for visualization concerns of informations. - The Graphics support is the key improvements being incorporated which now enables to utilize three dimensional graphics pattern using GPU acceleration. It can manage to provide some really cool visualizations being curved to provide media contents within the business apps with also the support for full HD contents at 1080p quality. - Silverlight 5 includes the support for 64-bit operating systems and relevant browsers and is also optimized to provide better performance. It can support the background thread for the networking which can reduce the latency of the network to a considerable extent. The Out-of-Browser functionality adds the support for utilizing various libraries and also the Win32 API. It also comes with testing support with VS 2010 which is mostly an automated procedure and has also enabled increased security aspects of all the Silverlight 5 developed applications by using the improved version of group policy support.

    Read the article

  • Dynamic Types and DynamicObject References in C#

    - by Rick Strahl
    I've been working a bit with C# custom dynamic types for several customers recently and I've seen some confusion in understanding how dynamic types are referenced. This discussion specifically centers around types that implement IDynamicMetaObjectProvider or subclass from DynamicObject as opposed to arbitrary type casts of standard .NET types. IDynamicMetaObjectProvider types  are treated special when they are cast to the dynamic type. Assume for a second that I've created my own implementation of a custom dynamic type called DynamicFoo which is about as simple of a dynamic class that I can think of:public class DynamicFoo : DynamicObject { Dictionary<string, object> properties = new Dictionary<string, object>(); public string Bar { get; set; } public DateTime Entered { get; set; } public override bool TryGetMember(GetMemberBinder binder, out object result) { result = null; if (!properties.ContainsKey(binder.Name)) return false; result = properties[binder.Name]; return true; } public override bool TrySetMember(SetMemberBinder binder, object value) { properties[binder.Name] = value; return true; } } This class has an internal dictionary member and I'm exposing this dictionary member through a dynamic by implementing DynamicObject. This implementation exposes the properties dictionary so the dictionary keys can be referenced like properties (foo.NewProperty = "Cool!"). I override TryGetMember() and TrySetMember() which are fired at runtime every time you access a 'property' on a dynamic instance of this DynamicFoo type. Strong Typing and Dynamic Casting I now can instantiate and use DynamicFoo in a couple of different ways: Strong TypingDynamicFoo fooExplicit = new DynamicFoo(); var fooVar = new DynamicFoo(); These two commands are essentially identical and use strong typing. The compiler generates identical code for both of them. The var statement is merely a compiler directive to infer the type of fooVar at compile time and so the type of fooExplicit is DynamicFoo, just like fooExplicit. This is very static - nothing dynamic about it - and it completely ignores the IDynamicMetaObjectProvider implementation of my class above as it's never used. Using either of these I can access the native properties:DynamicFoo fooExplicit = new DynamicFoo();// static typing assignmentsfooVar.Bar = "Barred!"; fooExplicit.Entered = DateTime.Now; // echo back static values Console.WriteLine(fooVar.Bar); Console.WriteLine(fooExplicit.Entered); but I have no access whatsoever to the properties dictionary. Basically this creates a strongly typed instance of the type with access only to the strongly typed interface. You get no dynamic behavior at all. The IDynamicMetaObjectProvider features don't kick in until you cast the type to dynamic. If I try to access a non-existing property on fooExplicit I get a compilation error that tells me that the property doesn't exist. Again, it's clearly and utterly non-dynamic. Dynamicdynamic fooDynamic = new DynamicFoo(); fooDynamic on the other hand is created as a dynamic type and it's a completely different beast. I can also create a dynamic by simply casting any type to dynamic like this:DynamicFoo fooExplicit = new DynamicFoo(); dynamic fooDynamic = fooExplicit; Note that dynamic typically doesn't require an explicit cast as the compiler automatically performs the cast so there's no need to use as dynamic. Dynamic functionality works at runtime and allows for the dynamic wrapper to look up and call members dynamically. A dynamic type will look for members to access or call in two places: Using the strongly typed members of the object Using theIDynamicMetaObjectProvider Interface methods to access members So rather than statically linking and calling a method or retrieving a property, the dynamic type looks up - at runtime  - where the value actually comes from. It's essentially late-binding which allows runtime determination what action to take when a member is accessed at runtime *if* the member you are accessing does not exist on the object. Class members are checked first before IDynamicMetaObjectProvider interface methods are kick in. All of the following works with the dynamic type:dynamic fooDynamic = new DynamicFoo(); // dynamic typing assignments fooDynamic.NewProperty = "Something new!"; fooDynamic.LastAccess = DateTime.Now; // dynamic assigning static properties fooDynamic.Bar = "dynamic barred"; fooDynamic.Entered = DateTime.Now; // echo back dynamic values Console.WriteLine(fooDynamic.NewProperty); Console.WriteLine(fooDynamic.LastAccess); Console.WriteLine(fooDynamic.Bar); Console.WriteLine(fooDynamic.Entered); The dynamic type can access the native class properties (Bar and Entered) and create and read new ones (NewProperty,LastAccess) all using a single type instance which is pretty cool. As you can see it's pretty easy to create an extensible type this way that can dynamically add members at runtime dynamically. The Alter Ego of IDynamicObject The key point here is that all three statements - explicit, var and dynamic - declare a new DynamicFoo(), but the dynamic declaration results in completely different behavior than the first two simply because the type has been cast to dynamic. Dynamic binding means that the type loses its typical strong typing, compile time features. You can see this easily in the Visual Studio code editor. As soon as you assign a value to a dynamic you lose Intellisense and you see which means there's no Intellisense and no compiler type checking on any members you apply to this instance. If you're new to the dynamic type it might seem really confusing that a single type can behave differently depending on how it is cast, but that's exactly what happens when you use a type that implements IDynamicMetaObjectProvider. Declare the type as its strong type name and you only get to access the native instance members of the type. Declare or cast it to dynamic and you get dynamic behavior which accesses native members plus it uses IDynamicMetaObjectProvider implementation to handle any missing member definitions by running custom code. You can easily cast objects back and forth between dynamic and the original type:dynamic fooDynamic = new DynamicFoo(); fooDynamic.NewProperty = "New Property Value"; DynamicFoo foo = fooDynamic; foo.Bar = "Barred"; Here the code starts out with a dynamic cast and a dynamic assignment. The code then casts back the value to the DynamicFoo. Notice that when casting from dynamic to DynamicFoo and back we typically do not have to specify the cast explicitly - the compiler can induce the type so I don't need to specify as dynamic or as DynamicFoo. Moral of the Story This easy interchange between dynamic and the underlying type is actually super useful, because it allows you to create extensible objects that can expose non-member data stores and expose them as an object interface. You can create an object that hosts a number of strongly typed properties and then cast the object to dynamic and add additional dynamic properties to the same type at runtime. You can easily switch back and forth between the strongly typed instance to access the well-known strongly typed properties and to dynamic for the dynamic properties added at runtime. Keep in mind that dynamic object access has quite a bit of overhead and is definitely slower than strongly typed binding, so if you're accessing the strongly typed parts of your objects you definitely want to use a strongly typed reference. Reserve dynamic for the dynamic members to optimize your code. The real beauty of dynamic is that with very little effort you can build expandable objects or objects that expose different data stores to an object interface. I'll have more on this in my next post when I create a customized and extensible Expando object based on DynamicObject.© Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • New article available in "SOA Suite Essentials for WLI Users" series: Dynamic Data Lookup in a Busin

    - by simone.geib
    It is my pleasure to announce the publishing of another article in our "SOA Suite Essentials for WLI Users" series: "Dynamic Data Lookup in a Business Process: Meta Data Cache Control in Oracle WebLogic Integration and Domain Value Maps in SOA Suite". This article explains how dynamic data can be retrieved in a business process using Domain Value Maps in SOA Suite and shows the similarities to the WLI XML MetaData Cache Control. Lots of customers have asked about this comparison and I hope they will find it useful. The article follows "Setting Web Service and JCA Adapter Endpoints Dynamically in Oracle SOA Suite" which describes how web services and JCA adapter endpoints in SOA Suite can be changed at run-time, and so completes the use case where a BPEL process writes to a file (via file adapter) and the output directory and the file name are set dynamically. Please let me know what you think about the series and this specific article.

    Read the article

  • Oracle OpenWorld Preview: Real World Perspectives from Oracle WebCenter Customers

    - by Christie Flanagan
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} If you frequent the Oracle WebCenter blog you’ve probably read a lot about the customer experience revolution over the last few months.  An important aspect of the customer experience revolution is the increasing role that peers play in influencing how others perceive a product, brand or solution, simply by sharing their own, real-world experiences.  Think about it, who do you trust more -- marketers and sales people pitching polished messages or peers with similar roles and similar challenges to the ones you face in your business every day? With this spirit in mind, this polished marketer personally invites you to hear directly from Oracle WebCenter customers about their real-life experiences during our customer panel sessions at Oracle OpenWorld next week.  If you’re currently using WebCenter, thinking about it, or just want to find out more about best practices in social business, next-generation portals, enterprise content management or web experience management, be sure to attend these sessions: CON8899 - Becoming a Social Business: Stories from the Front Lines of Change Wednesday, Oct 3, 11:45 AM - 12:45 PM - Moscone West - 3000Priscilla Hancock - Vice President/CIO, University of Louisville Kellie Christensen - Director of Information Technology, Banner EngineeringWhat does it really mean to be a social business? How can you change your organization to embrace social approaches? What pitfalls do you need to avoid? In this lively panel discussion, customer and industry thought leaders in social business explore these topics and more as they share their stories of the good, the bad, and the ugly that can happen when embracing social methods and technologies to improve business success. Using moderated questions and open Q&A from the audience, the panel discusses vital topics such as the critical factors for success, the major issues to avoid, how to gain senior executive support for social efforts, how to handle undesired behavior, and how to measure business impact. This session will take a thought-provoking look at becoming a social business from the inside. CON8900 - Building Next-Generation Portals: An Interactive Customer Panel DiscussionWednesday, Oct 3, 5:00 PM - 6:00 PM - Moscone West - 3000Roberts Wayne - Director, IT, Canadian Partnership Against CancerMike Beattie - VP Application Development, Aramark Uniform ServicesJohn Chen - Utilities Services Manager 6, Los Angeles Department of Water & PowerJörg Modlmayr - Head of Product Managment, Siemens AGSocial and collaborative technologies have changed how people interact, learn, and collaborate, and providing a modern, social Web presence is imperative to remain competitive in today’s market. Can your business benefit from a more collaborative and interactive portal environment for employees, customers, and partners? Attend this session to hear from Oracle WebCenter Portal customers as they share their strategies and best practices for providing users with a modern experience that adapts to their needs and includes personalized access to content in context. The panel also addresses how customers have benefited from creating next-generation portals by migrating from older portal technologies to Oracle WebCenter Portal. CON8898 - Land Mines, Potholes, and Dirt Roads: Navigating the Way to ECM NirvanaThursday, Oct 4, 12:45 PM - 1:45 PM - Moscone West - 3001Stephen Madsen - Senior Management Consultant, Alberta Agriculture and Rural DevelopmentHimanshu Parikh - Sr. Director, Enterprise Architecture & Middleware, Ross Stores, Inc.Ten years ago, people were predicting that by this time in history, we’d be some kind of utopian paperless society. As we all know, we're not there yet, but are we getting closer? What is keeping companies from driving down the road to enterprise content management bliss? Most people understand that using ECM as a central platform enables organizations to expedite document-centric processes, but most business processes in organizations are still heavily paper-based. Many of these processes could be automated and improved with an ECM platform infrastructure. In this panel discussion, you’ll hear from Oracle WebCenter customers that have already solved some of these challenges as they share their strategies for success and roads to avoid along your journey. CON8897 - Using Web Experience Management to Drive Online Marketing SuccessThursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West - 3001Blane Nelson - Chief Architect, Ancestry.comMike Remedios - CIO, ArbonneCaitlin Scanlon - Product Manager, Monster WorldwideEvery year, the online channel becomes more imperative for driving organizational top-line revenue, but for many companies, mastering how to best market their products and services in a fast-evolving online world with high customer expectations for personalized experiences can be a complex proposition. Come to this panel discussion, and hear directly from customers on how they are succeeding today by using Web experience management to drive marketing success, using capabilities such as targeting and optimization, user-generated content, mobile site publishing, and site visitor personalization to deliver engaging online experiences. Your Handy Guide to WebCenter at Oracle OpenWorld Want a quick and easy guide to all the keynotes, demos, hands-on labs and WebCenter sessions you definitely don't want to miss at Oracle OpenWorld? Download this handy guide, Focus on WebCenter. More helpful links: * Oracle OpenWorld* Oracle Customer Experience Summit @ OpenWorld* Oracle OpenWorld on Facebook * Oracle OpenWorld on Twitter* Oracle OpenWorld on LinkedIn* Oracle OpenWorld Blog

    Read the article

  • Install SharePoint 2013 on a two server farm

    - by sreejukg
    When SharePoint 2010 was released, I published an article on how to install SharePoint on a two server farm. You can find that article from the below link. http://weblogs.asp.net/sreejukg/archive/2010/09/28/install-sharepoint-2010-in-a-farm-environment.aspx Now it is the time for SharePoint 2013. SharePoint 2013 brings lots of improvements to the topologies, but still supports two-server architecture. Be noted that “two-server architecture” is meant for small implementations with limited service applications. Refer the below link to understand more about the SharePoint architecture http://technet.microsoft.com/en-us/sharepoint/fp123594.aspx A two tier farm consists of a database server and a web/application server as follows. In this article I am going to explain how to install SharePoint in a two server farm. I prepared 2 servers, both of them joined to a domain(SP2013Domain), and in one server I installed SQL Server 2012 (Server name: SP2013_DB). Now I am going to install SharePoint 2013 in the second server (Server Name: SP2013). The following domain accounts are created for the installation.   User Account Purpose Server roles required SQLService - SQL Server service account - This account is used as the service account for SQL Server. - domain user account / local account spSetup - You will be running SharePoint setup and SharePoint products and configuration wizard using this account. -domain user account - Member of the Administrators group on each server on which Setup is run(In our case SP2013) - SQL Server login on the computer running SQL Server - Member of the Server admin SQL Server security role spDataaccess - Configure and manage server farm. This - Application pool identity for central admin website - Microsoft SharePoint Foundation Workflow Timer Service Domain user account (Other permissions will be set to this account automatically)   The above are the minimum list of accounts needed for SharePoint 2013 installation. Now you need additional accounts for services, application pool identities for web applications etc. Refer the service accounts requirements for SharePoint from the below link. http://technet.microsoft.com/en-us/library/cc263445.aspx In order to install SharePoint 2013 login to the server using setup account(spsetup). Now run the setup from the installation media. First you need to install the pre-requisites. During the installation process, the server may restart several times. The installation wizard will guide you through the installation. In the next step, you need to agree on the terms and conditions as usual. Once you click next, the installation will start immediately. The installation wizard will let you know the progress of the installation. During the installation you may receive notifications to restart the server, you need to just click the finish button so that the system will be restarted. Once all the pre-requisites are installed, you will get the success message as below. Click finish to close the dialog. Now from the media, run the setup again and this time you choose install SharePoint server. In the next screen, you need to enter the product key, and then click continue. Now you need to agree on the terms and conditions for SharePoint 2013, and click continue. Choose the file location as per your policies and click on the install now button. You will see the installation progress. Once completed, you will see the installation completed dialog. Make sure you select the run products and configuration wizard option and click close. From the start screen, click next to start the configuration wizard. You will receive warning telling you some of the services will be stopped during the installation. Select “create new server farm” radio button and click next. In the next step, you need to enter the configuration database settings. Enter the database server details and then specify the database access account. You need to specify the farm account(spdataaccess). The wizard will grant additional privileges to the account as needed. In the next step you need to specify the passphrase, you need to note this as you need this passphrase if you add additional server to the farm. In the next step, you need to enter the central administration website port and security settings. You can choose a port or just keep it as suggested by the wizard. Click next, you will see the summary of what you have been selected. Verify the selected settings and if you want to change any, just click back and change them, or click continue to start the configuration. The configuration may take some time, you can view the progress, in case of any error, you will get the log file, you need to fix any error and again start the configuration wizard. Once the configuration successful, you will see the success message. Just click finish. Now you can browse the central administration website. It is good to check the health analyzer to review whether there are any errors/warnings. No warnings/errors indicate a good installation. Two-Server architecture is the least configuration for production environments. For small firms with less number of employees can implement SharePoint 2013 using this topology and as the workload increases, they can add more servers to the farm without reconstructing everything.

    Read the article

  • Replacing jQuery.live() with jQuery.on()

    - by Rick Strahl
    jQuery 1.9 and 1.10 have introduced a host of changes, but for the most part these changes are mostly transparent to existing application usage of jQuery. After spending some time last week with a few of my projects and going through them with a specific eye for jQuery failures I found that for the most part there wasn't a big issue. The vast majority of code continues to run just fine with either 1.9 or 1.10 (which are supposed to be in sync but with 1.10 removing support for legacy Internet Explorer pre-9.0 versions). However, one particular change in the new versions has caused me quite a bit of update trouble, is the removal of the jQuery.live() function. This is my own fault I suppose - .live() has been deprecated for a while, but with 1.9 and later it was finally removed altogether from jQuery. In the past I had quite a bit of jQuery code that used .live() and it's one of the things that's holding back my upgrade process, although I'm slowly cleaning up my code and switching to the .on() function as the replacement. jQuery.live() jQuery.live() was introduced a long time ago to simplify handling events on matched elements that exist currently on the document and those that are are added in the future and also match the selector. jQuery uses event bubbling, special event binding, plus some magic using meta data attached to a parent level element to check and see if the original target event element matches the selected selected elements (for more info see Elijah Manor's comment below). An Example Assume a list of items like the following in HTML for example and further assume that the items in this list can be appended to at a later point. In this app there's a smallish initial list that loads to start, and as the user scrolls towards the end of the initial small list more items are loaded dynamically and added to the list.<div id="PostItemContainer" class="scrollbox"> <div class="postitem" data-id="4z6qhomm"> <div class="post-icon"></div> <div class="postitemheader"><a href="show/4z6qhomm" target="Content">1999 Buick Century For Sale!</a></div> <div class="postitemprice rightalign">$ 3,500 O.B.O.</div> <div class="smalltext leftalign">Jun. 07 @ 1:06am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> <div class="postitem" data-id="2jtvuu17"> <div class="postitemheader"><a href="show/2jtvuu17" target="Content">Toyota VAN 1987</a></div> <div class="postitemprice rightalign">$950</div> <div class="smalltext leftalign">Jun. 07 @ 12:29am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> … </div> With the jQuery.live() function you could easily select elements and hook up a click handler like this:$(".postitem").live("click", function() {...}); Simple and perfectly readable. The behavior of the .live handler generally was the same as the corresponding simple event handlers like .click(), except that you have to explicitly name the event instead of using one of the methods. Re-writing with jQuery.on() With .live() removed in 1.9 and later we have to re-write .live() code above with an alternative. The jQuery documentation points you at the .on() or .delegate() functions to update your code. jQuery.on() is a more generic event handler function, and it's what jQuery uses internally to map the high level event functions like .click(),.change() etc. that jQuery exposes. Using jQuery.on() however is not a one to one replacement of the .live() function. While .on() can handle events directly and use the same syntax as .live() did, you'll find if you simply switch out .live() with .on() that events on not-yet existing elements will not fire. IOW, the key feature of .live() is not working. You can use .on() to get the desired effect however, but you have to change the syntax to explicitly handle the event you're interested in on the container and then provide a filter selector to specify which elements you are actually interested in for handling the event for. Sounds more complicated than it is and it's easier to see with an example. For the list above hooking .postitem clicks, using jQuery.on() looks like this:$("#PostItemContainer").on("click", ".postitem", function() {...}); You specify a container that can handle the .click event and then provide a filter selector to find the child elements that trigger the  the actual event. So here #PostItemContainer contains many .postitems, whose click events I want to handle. Any container will do including document, but I tend to use the container closest to the elements I actually want to handle the events on to minimize the event bubbling that occurs to capture the event. With this code I get the same behavior as with .live() and now as new .postitem elements are added the click events are always available. Sweet. Here's the full event signature for the .on() function: .on( events [, selector ] [, data ], handler(eventObject) ) Note that the selector is optional - if you omit it you essentially create a simple event handler that handles the event directly on the selected object. The filter/child selector required if you want life-like - uh, .live() like behavior to happen. While it's a bit more verbose than what .live() did, .on() provides the same functionality by being more explicit on what your parent container for trapping events is. .on() is good Practice even for ordinary static Element Lists As a side note, it's a good practice to use jQuery.on() or jQuery.delegate() for events in most cases anyway, using this 'container event trapping' syntax. That's because rather than requiring lots of event handlers on each of the child elements (.postitem in the sample above), there's just one event handler on the container, and only when clicked does jQuery drill down to find the matching filter element and tries to match it to the originating element. In the early days of jQuery I used manually build handlers that did this and manually drilled from the event object into the originalTarget to determine if it's a matching element. With later versions of jQuery the various event functions in jQuery essentially provide this functionality out of the box with functions like .on() and .delegate(). All of this is nothing new, but I thought I'd write this up because I have on a few occasions forgotten what exactly was needed to replace the many .live() function calls that litter my code - especially older code. This will be a nice reminder next time I have a memory blank on this topic. And maybe along the way I've helped one or two of you as well to clean up your .live() code…© Rick Strahl, West Wind Technologies, 2005-2013Posted in jQuery   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Agile Awakenings and the Rules of Agile

    - by Robert May
    For those that care, you can read my history of management and technology to understand why I think I’m qualified to talk about this at all.  It’s boring, so feel free to skip it. Awakenings I first started to play around with the idea of “agile” in 2004 or 2005.  I found a book on the Rational Unified Process that I thought was good, and attempted to implement parts of it.  I thought I was agile, but really, it wasn’t.   I still didn’t understand the concept of a team.  I still wanted to tell the team what to do and how to get it done.  I still thought I was smarter than the team. After that job, I started work on another project and began helping that team.  The first few months were really rough.  We were implementing Scrum, which was relatively new to everyone on the team, and, quite frankly, I was doing a poor job of it.  I was trying to micro-manage every aspect of the teams work, and we were all miserable. The moment of change came when the senior architect bailed on the project.  His comment to me was: “This isn’t Agile.  Where are the stand-ups?  Where are the stories?”  He was dead on, and I finally woke up.  I finally realized that I was the problem!  I wasn’t trusting the team.  I wasn’t helping the team.  I was being a manager. Like many (most?), I was claiming to be Agile and use Scrum, but I wasn’t in fact following the rules Scrum.  Since then, I’ve done a lot of studying, hands on practice, coaching of many different teams, and other learning around Scrum, and I have discovered that Scrum has some rules that must be followed for success, even though the process is about continuous improvement. I’ve been practicing Scrum right for about 4 years now and have helped multiple teams implement it successfully, so what you’re about to get is based on experience, rather than just theory. The Rules of Scrum In my experience, what I’ve found is that most companies that claim to be doing Scrum or Agile are actually NOT doing either.  This stems largely because they think that they can “adopt the rules of Agile that fit their organization.”  Sadly, many of them think that this means they can adopt iterations (sprints) and not much else.  Either that, or they think they can do whatever they want, or were doing before, and call it Scrum.  This is simply not true. Here are some rules that must be followed for you to really be doing Scrum.  I’ll go into detail on each one of these posts in future blog posts and update links here.  My intent is that this will help other teams implementing scrum to see more success. Agile does not allow you to do whatever you want A Product Owner is required A ScrumMaster is required The team must function as a Team, and QA must be part of the team Support from upper management is required A prioritized product backlog is required A prioritized sprint backlog is required Release planning is required Complete spring planning is required Showcases are required Velocity must be measured Retrospectives are required Daily stand-ups are required Visibility is absolutely required For now, I think that’s enough, although I reserve the right to add more.  If you’re breaking any of these rules, you’re probably not doing Scrum.  There are exceptions to these rules, but until you have practiced Scrum for a while, you don’t know what those exceptions are. Breaking the Rules Many teams break these rules because they are the ones that expose the most pain.  Scrum is not Advil.  It’s not intended to mask the pain, its intended to cure it.  Let me explain that analogy a bit more.  Recently, my 7 year old son broke his arm, quite severely (see the X-Ray to the right).  That caused him a great deal of pain.  We went first to one doctor, and after viewing the X-Ray, they determined that there was no way that they’d cast the arm at their location.  It was simply too bad of a break for them to deal with.  They did, however, give him some Advil for the pain and put a splint on his arm to stabilize the broken bones.  Within minutes, he was feeling much better.  Had we been stupid, we could have gone home and he’d have been just as happy as ever . . . until the pain medication wore off or one of his siblings touched the splint.  Then, all of that pain would come right back to the top.  Sure, he could make it go away by just taking more Advil and moving the splint out of the way, but that wasn’t going to fix the problem permanently. We ended up in an emergency room with a doctor who could fix his arm.  However, we were warned that the fix was going to be VERY painful, and it was.  Even with heavy sedation (Propofol), my son was in enough pain that he squirmed and wiggled trying to get his arm away from the doctor.  He had to endure this pain in order to have a functional arm. But the setting wasn’t the end.  He had to have several casts, had to have it re-broken once, since the first setting didn’t take and finally was given a clean bill of health. Agile implementation is much like this story.  Agile was developed as a result of people recognizing that the development methodologies that were currently in place simply were ineffective.  However, the fix to the broken development that’s been festering for many years is not painless.  Many people start Agile thinking that things will be wonderful.  They won’t!  Agile is about visibility, and often, it brings great pain to surface.  It causes all of the missed deadlines, the cowboy coders, the coasters, the micro-managers, the lazy, and all of the other problems that are really part of your development process now to become painfully visible to EVERYONE.  Many people don’t like this exposure.  Agile will make the pain better, but not if you remove the cast (the rules above) prematurely and start breaking the rules that expose the most pain.  The healing will take time and is not instant (like Advil).  Figuring out what the true source of pain and fixing it is very valuable to you, your team, and your company.  Remember as you’re doing this that Agile isn’t the source of the pain, it’s really just exposing it.  Find the source. My recommendation is that ALL of these rules are followed for a minimum of six months, and preferably for an entire year, before you decide to break any of these rules.  Get a few good releases under your belt.  Figure out what your velocity is and start firing as a team.  Chances are, after you see agile really in action, you won’t want to break the rules because you’ll see their value. More Reading Jean Tabaka recently published a list of 78 Things I Have Learned in 6 Years of Agile Coaching.  Highly recommended. Technorati Tags: Agile,Scrum,Rules

    Read the article

  • Best criteria for choosing a DNS provider : Redundancy, Locations, Cost, IPV6, Reliability

    - by antoinet
    What criteria should I use to choose a good DNS provider? Redundancy - Your DNS service should use at least 4 nameservers. You should also check for the use of anycast servers such as Amazon Route 53 and dyn.com services. Worldwide server location - Servers shall be located worldwide, not just in one country! Ipv6 support - It shall be possible to declare an AAAA entry to your server if it supports IPV6 Cost is of course an issue. Some service are free, Amazon Route 53 seems quite cheap. Reliability : SLA is also important, it demonstrate that reliability is measured. Your dns provider shall then state for a refund in case a failure is encountered. Anything else? For reference, a couple of links for more information: http://serverfault.com/questions/216330/why-should-i-use-amazon-route-53-over-my-registrars-dns-servers http://aws.amazon.com/route53/ http://dyn.com/dns/

    Read the article

  • SQL Server and Hyper-V Dynamic Memory Part 3

    - by SQLOS Team
    In parts 1 and 2 of this series we looked at the basics of Hyper-V Dynamic Memory and SQL Server memory management. In this part Serdar looks at configuration guidelines for SQL Server memory management. Part 3: Configuration Guidelines for Hyper-V Dynamic Memory and SQL Server Now that we understand SQL Server Memory Management and Hyper-V Dynamic Memory basics, let’s take a look at general configuration guidelines in order to utilize benefits of Hyper-V Dynamic Memory in your SQL Server VMs. Requirements Host Operating System Requirements Hyper-V Dynamic Memory feature is introduced with Windows Server 2008 R2 SP1. Therefore in order to use Dynamic Memory for your virtual machines, you need to have Windows Server 2008 R2 SP1 or Microsoft Hyper-V Server 2008 R2 SP1 in your Hyper-V host. Guest Operating System Requirements In addition to this Dynamic Memory is only supported in Standard, Web, Enterprise and Datacenter editions of windows running inside VMs. Make sure that your VM is running one of these editions. For additional requirements on each operating system see “Dynamic Memory Configuration Guidelines” here. SQL Server Requirements All versions of SQL Server support Hyper-V Dynamic Memory. However, only certain editions of SQL Server are aware of dynamically changing system memory. To have a truly dynamic environment for your SQL Server VMs make sure that you are running one of the SQL Server editions listed below: ·         SQL Server 2005 Enterprise ·         SQL Server 2008 Enterprise / Datacenter Editions ·         SQL Server 2008 R2 Enterprise / Datacenter Editions Configuration guidelines for other versions of SQL Server are covered below in the FAQ section. Guidelines for configuring Dynamic Memory Parameters Here is how to configure Dynamic Memory for your SQL VMs in a nutshell: Hyper-V Dynamic Memory Parameter Recommendation Startup RAM 1 GB + SQL Min Server Memory Maximum RAM > SQL Max Server Memory Memory Buffer % 5 Memory Weight Based on performance needs   Startup RAM In order to ensure that your SQL Server VMs can start correctly, ensure that Startup RAM is higher than configured SQL Min Server Memory for your VMs. Otherwise SQL Server service will need to do paging in order to start since it will not be able to see enough memory during startup. Also note that Startup Memory will always be reserved for your VMs. This will guarantee a certain level of performance for your SQL Servers, however setting this too high will limit the consolidation benefits you’ll get out of your virtualization environment. Maximum RAM This one is obvious. If you’ve configured SQL Max Server Memory for your SQL Server, make sure that Dynamic Memory Maximum RAM configuration is higher than this value. Otherwise your SQL Server will not grow to memory values higher than the value configured for Dynamic Memory. Memory Buffer % Memory buffer configuration is used to provision file cache to virtual machines in order to improve performance. Due to the fact that SQL Server is managing its own buffer pool, Memory Buffer setting should be configured to the lowest value possible, 5%. Configuring a higher memory buffer will prevent low resource notifications from Windows Memory Manager and it will prevent reclaiming memory from SQL Server VMs. Memory Weight Memory weight configuration defines the importance of memory to a VM. Configure higher values for the VMs that have higher performance requirements. VMs with higher memory weight will have more memory under high memory pressure conditions on your host. Questions and Answers Q1 – Which SQL Server memory model is best for Dynamic Memory? The best SQL Server model for Dynamic Memory is “Locked Page Memory Model”. This memory model ensures that SQL Server memory is never paged out and it’s also adaptive to dynamically changing memory in the system. This will be extremely useful when Dynamic Memory is attempting to remove memory from SQL Server VMs ensuring no SQL Server memory is paged out. You can find instructions on configuring “Locked Page Memory Model” for your SQL Servers here. Q2 – What about other SQL Server Editions, how should I configure Dynamic Memory for them? Other editions of SQL Server do not adapt to dynamically changing environments. They will determine how much memory they should allocate during startup and don’t change this value afterwards. Therefore make sure that you configure a higher startup memory for your VM because that will be all the memory that SQL Server utilize Tune Maximum Memory and Memory Buffer based on the other workloads running on the system. If there are no other workloads consider using Static Memory for these editions. Q3 – What if I have multiple SQL Server instances in a VM? Having multiple SQL Server instances in a VM is not a general recommendation for predictable performance, manageability and isolation. In order to achieve a predictable behavior make sure that you configure SQL Min Server Memory and SQL Max Server Memory for each instance in the VM. And make sure that: ·         Dynamic Memory Startup Memory is greater than the sum of SQL Min Server Memory values for the instances in the VM ·         Dynamic Memory Maximum Memory is greater than the sum of SQL Max Server Memory values for the instances in the VM Q4 – I’m using Large Page Memory Model for my SQL Server. Can I still use Dynamic Memory? The short answer is no. SQL Server does not dynamically change its memory size when configured with Large Page Memory Model. In virtualized environments Hyper-V provides large page support by default. Most of the time, Large Page Memory Model doesn’t bring any benefits to a SQL Server if it’s running in virtualized environments. Q5 – How do I monitor SQL performance when I’m trying Dynamic Memory on my VMs? Use the performance counters below to monitor memory performance for SQL Server: Process - Working Set: This counter is available in the VM via process performance counters. It represents the actual amount of physical memory being used by SQL Server process in the VM. SQL Server – Buffer Cache Hit Ratio: This counter is available in the VM via SQL Server counters. This represents the paging being done by SQL Server. A rate of 90% or higher is desirable. Conclusion These blog posts are a quick start to a story that will be developing more in the near future. We’re still continuing our testing and investigations to provide more detailed configuration guidelines with example performance numbers with a white paper in the upcoming months. Now it’s time to give SQL Server and Hyper-V Dynamic Memory a try. Use this guidelines to kick-start your environment. See what you think about it and let us know of your experiences. - Serdar Sutay Originally posted at http://blogs.msdn.com/b/sqlosteam/

    Read the article

  • How do Programmers in the east see programmers in the west?

    - by Jon Hopkins
    The other half of this question: How do programmers in the west see the programmers in the east? I think it's just as interesting and important to see how programmers in the east view programmers in the west. The eastern part of the world (India/China/Philippines ) is often seen as mainly providing outsourcing services to the western world (USA and Europe). Do you have the experience of working as part of an offshore team? If yes, how was it? Do you hold any generalized ideas or opinions about the programmers from the West (e.g. Are they cooperative, do they deliver on time or do they do quality work?)

    Read the article

  • West Palm Beach .Net User Group May 25th User Group Meeting Update

    - by Sam Abraham
    Just returned from the West Palm Beach .Net User Group Meeting featuring Shervin Shakibi who spoke to us about What’s New in Silverlight 4.0.  It was a great talk where the audience was fully engaged with Shervin as he spoke about and demonstrated the various new features of Silverlight 4.0. We enjoyed free pizza and soda as well as a free raffle with every attendee leaving home with a freebie.   For our June Meeting, Don Demsak, Microsoft MVP, will be speaking to us about WCF Data Services.  We will continue to have free pizza and a free raffle with great prizes, so hope to see you all there. Below are some photos from The West Palm Beach .Net User Group May 25th meeting with Shervin Shakibi. See you next Month for our June 22nd meeting, 6:30 PM at CompTec   Sam Abraham Site Director - West Palm Beach .Net User Group

    Read the article

  • No, iCloud Isn’t Backing Them All Up: How to Manage Photos on Your iPhone or iPad

    - by Chris Hoffman
    Are the photos you take with your iPhone or iPad backed up in case you lose your device? If you’re just relying on iCloud to manage your important memories, your photos may not be backed up at all. Apple’s iCloud has a photo-syncing feature in the form of “Photo Stream,” but Photo Stream doesn’t actually perform any long-term backups of your photos. iCloud’s Photo Backup Limitations Assuming you’ve set up iCloud on your iPhone or iPad, your device is using a feature called “Photo Stream” to automatically upload the photos you take to your iCloud storage and sync them across your devices. Unfortunately, there are some big limitations here. 1000 Photos: Photo Stream only backs up the latest 1000 photos. Do you have 1500 photos in your Camera Roll folder on your phone? If so, only the latest 1000 photos are stored in your iCloud account online. If you don’t have those photos backed up elsewhere, you’ll lose them when you lose your phone. If you have 1000 photos and take one more, the oldest photo will be removed from your iCloud Photo Stream. 30 Days: Apple also states that photos in your Photo Stream will be automatically deleted after 30 days “to give your devices plenty of time to connect and download them.” Some people report photos aren’t deleted after 30 days, but it’s clear you shouldn’t rely on iCloud for more than 30 days of storage. iCloud Storage Limits: Apple only gives you 5 GB of iCloud storage space for free, and this is shared between backups, documents, and all other iCloud data. This 5 GB can fill up pretty quickly. If your iCloud storage is full and you haven’t purchased any more storage more from Apple, your photos aren’t being backed up. Videos Aren’t Included: Photo Stream doesn’t include videos, so any videos you take aren’t automatically backed up. It’s clear that iCloud’s Photo Stream isn’t designed as a long-term way to store your photos, just a convenient way to access recent photos on all your devices before you back them up for real. iCloud’s Photo Stream is Designed for Desktop Backups If you have a Mac, you can launch iPhoto and enable the Automatic Import option under Photo Stream in its preferences pane. Assuming your Mac is on and connected to the Internet, iPhoto will automatically download photos from your photo stream and make local backups of them on your hard drive. You’ll then have to back up your photos manually so you don’t lose them if your Mac’s hard drive ever fails. If you have a Windows PC, you can install the iCloud Control Panel, which will create a Photo Stream folder on your PC. Your photos will be automatically downloaded to this folder and stored in it. You’ll want to back up your photos so you don’t lose them if your PC’s hard drive ever fails. Photo Stream is clearly designed to be used along with a desktop application. Photo Stream temporarily backs up your photos to iCloud so iPhoto or iCloud Control Panel can download them to your Mac or PC and make a local backup before they’re deleted. You could also use iTunes to sync your photos from your device to your PC or Mac, but we don’t really recommend it — you should never have to use iTunes. How to Actually Back Up All Your Photos Online So Photo Stream is actually pretty inconvenient — or, at least, it’s just a way to temporarily sync photos between your devices without storing them long-term. But what if you actually want to automatically back up your photos online without them being deleted automatically? The solution here is a third-party app that does this for you, offering the automatic photo uploads with long-term storage. There are several good services with apps in the App Store: Dropbox: Dropbox’s Camera Upload feature allows you to automatically upload the photos — and videos — you take to your Dropbox account. They’ll be easily accessible anywhere there’s a Dropbox app and you can get much more free Dropbox storage than you can iCloud storage. Dropbox will never automatically delete your old photos. Google+: Google+ offers photo and video backups with its Auto Upload feature, too. Photos will be stored in your Google+ Photos — formerly Picasa Web Albums — and will be marked as private by default so no one else can view them. Full-size photos will count against your free 15 GB of Google account storage space, but you can also choose to upload an unlimited amount of photos at a smaller resolution. Flickr: The Flickr app is no longer a mess. Flickr offers an Auto Upload feature for uploading full-size photos you take and free Flickr accounts offer a massive 1 TB of storage for you to store your photos. The massive amount of free storage alone makes Flickr worth a look. Use any of these services and you’ll get an online, automatic photo backup solution you can rely on. You’ll get a good chunk of free space, your photos will never be automatically deleted, and you can easily access them from any device. You won’t have to worry about storing local copies of your photos and backing them up manually. Apple should fix this mess and offer a better solution for long-term photo backup, especially considering the limitations aren’t immediately obvious to users. Until they do, third-party apps are ready to step in and take their place. You can also automatically back up your photos to the web on Android with Google+’s Auto Upload or Dropbox’s Camera Upload. Image Credit: Simon Yeo on Flickr     

    Read the article

  • Secret Server 7.3 released – store your team’s passwords securely.

    - by thycotic
    The Thycotic team just recently released 7.3 of our enterprise password management system.  The main improvement was the UI – we used lots of jQuery to make a Dashboard-like interface that allows you to create tabs, drag widgets, add/remove widgets etc.  This was a great face lift for a tool that is already the cornerstone for password management in many IT departments. Check out a few videos that show off the new stuff.   Jonathan Cogley is the CEO of Thycotic Software, an agile software services and product development company based in Washington DC.  Secret Server is our flagship enterprise password manager.

    Read the article

  • On Her Majesty's Secret Source Code: .NET Reflector 7 Early Access Builds Now Available

    - by Bart Read
    Dodgy Bond references aside, I'm extremely happy to be able to tell you that we've just released our first .NET Reflector 7 Early Access build. We're going to make these available over the coming weeks via the main .NET Reflector download page at: http://reflector.red-gate.com/Download.aspx Please have a play and tell us what you think in the forum we've set up. Also, please let us know if you run into any problems in the same place. The new version so far comes with numerous decompilation improvements including (after 5 years!) support for iterator blocks - i.e., the yield statement first seen in .NET 2.0. We've also done a lot of work to solidify the support for .NET 4.0. Clive's written about the work he's done to support iterator blocks in much more detail here, along with the odd problem he's encountered when dealing with compiler generated code: http://www.simple-talk.com/community/blogs/clivet/96199.aspx. On the UI front we've started what will ultimately be a rewrite of the entire front-end, albeit broken into stages over two or three major releases. The most obvious addition at the moment is tabbed browsing, which you can see in Figure 1. Figure 1. .NET Reflector's new tabbed decompilation feature. Use CTRL+Click on any item in the assembly browser tree, or any link in the source code view, to open it in a new tab. This isn't by any means finished. I'll be tying up loose ends for the next few weeks, with a major focus on performance and resource usage. .NET Reflector has historically been a largely single-threaded application which has been fine up until now but, as you might expect, the addition of browser-style tabbing has pushed this approach somewhat beyond its limit. You can see this if you refresh the assemblies list by hitting F5. This shows up another problem: we really need to make Reflector remember everything you had open before you refreshed the list, rather than just the last item you viewed - I discovered that it's always done the latter, but it used to hide all panes apart from the treeview after a Refresh, including the decompiler/disassembler window. Ultimately I've got plans to add the whole VS/Chrome/Firefox style ability to drag a tab into the middle of nowhere to spawn a new window, but I need to be mindful of the add-ins, amongst other things, so it's possible that might slip to a 7.5 or 8.0 release. You'll also notice that .NET Reflector 7 now needs .NET 3.5 or later to run. We made this jump because we wanted to offer ourselves a much better chance of adding some really cool functionality to support newer technologies, such as Silverlight and Windows Phone 7. We've also taken the opportunity to start using WPF for UI development, which has frankly been a godsend. The learning curve is practically vertical but, I kid you not, it's just a far better world. Really. Stop using WinForms. Now. Why are you still using it? I had to go back and work on an old WinForms dialog for an hour or two yesterday and it really made me wince. The point is we'll be able to move the UI in some exciting new directions that will make Reflector easier to use whilst continuing to develop its functionality without (and this is key) cluttering the interface. The 3.5 language enhancements should also enable us to be much more productive over the longer term. I know most of you have .NET Fx 3.5 or 4.0 already but, if you do need to install a new version, I'd recommend you jump straight to 4.0 because, for one thing, it's faster, and if you're starting afresh there's really no reason not to. Despite the Fx version jump the Visual Studio add-in should still work fine in Visual Studio 2005, and obviously will continue to work in Visual Studio 2008 and 2010. If you do run into problems, again, please let us know here. As before, we continue to support every edition of Visual Studio exception the Express Editions. Speaking of Visual Studio, we've also been improving the add-in. You can now open and explore decompiled code for any referenced assembly in any project in your solution. Just right-click on the reference, then click Decompile and Explore on the context menu. Reflector will pop up a progress box whilst it decompiles your assembly (Figure 2) - you can move this out of the way whilst you carry on working. Figure 2. Decompilation progress. This isn't modal so you can just move it out of the way and carry on working. Once it's done you can explore your assembly in the Reflector treeview (Figure 3), also accessible via the .NET Reflector Explore Decompiled Assemblies main menu item. Double-click on any item to open decompiled source in the Visual Studio source code view. Use right-click and Go To Definition on the source view context menu to navigate through the code. Figure 3. Using the .NET Reflector treeview within Visual Studio. Double-click on any item to open decompiled source in the source code view. There are loads of other changes and fixes that have gone in, often under the hood, which I don't have room to talk about here, and plenty more to come over the next few weeks. I'll try to keep you abreast of new functionality and changes as they go in. There are a couple of smaller things worth mentioning now though. Firstly, we've reorganised the menus and toolbar in Reflector itself to more closely mirror what you might be used to in other applications. Secondly, we've tried to make some of the functionality more discoverable. For example, you can now switch decompilation target framework version directly from the toolbar - and the default is now .NET 4.0. I think that about covers it for the moment. As I said, please use the new version, and send us your feedback. Here's that download URL again: http://reflector.red-gate.com/Download.aspx. Until next time! Technorati Tags: .net reflector,7,early access,new version,decompilation,tabbing,visual studio,software development,.net,c#,vb

    Read the article

  • .NET 4.5 is an in-place replacement for .NET 4.0

    - by Rick Strahl
    With the betas for .NET 4.5 and Visual Studio 11 and Windows 8 shipping many people will be installing .NET 4.5 and hacking away on it. There are a number of great enhancements that are fairly transparent, but it's important to understand what .NET 4.5 actually is in terms of the CLR running on your machine. When .NET 4.5 is installed it effectively replaces .NET 4.0 on the machine. .NET 4.0 gets overwritten by a new version of .NET 4.5 which - according to Microsoft - is supposed to be 100% backwards compatible. While 100% backwards compatible sounds great, we all know that 100% is a hard number to hit, and even the aforementioned blog post at the Microsoft site acknowledges this. But there's so much more than backwards compatibility that makes this awkward at best and confusing at worst. What does ‘Replacement’ mean? When you install .NET 4.5 your .NET 4.0 assemblies in the \Windows\.NET Framework\V4.0.30319 are overwritten with a new set of assemblies. You end up with overwritten assemblies as well as a bunch of new ones (like the new System.Net.Http assemblies for example). The following screen shot demonstrates system.dll on my test machine (left) running .NET 4.5 on the right and my production laptop running stock .NET 4.0 (right):   Clearly they are different files with a difference in file sizes (interesting that the 4.5 version is actually smaller). That’s not all. If you actually query the runtime version when .NET 4.5 is installed with with Environment.Version you still get: 4.0.30319 If you open the properties of System.dll assembly in .NET 4.5 you'll also see: Notice that the file version is also left at 4.0.xxx. There are differences in build numbers: .NET 4.0 shows 261 and the current .NET 4.5 beta build is 17379. I suppose you can use assume a build number greater than 17000 is .NET 4.5, but that's pretty hokey to say the least. There’s no easy or obvious way to tell whether you are running on 4.0 or 4.5 – to the application they appear to be the same runtime version. And that is what Microsoft intends here. .NET 4.5 is intended as an in-place upgrade. Compile to 4.5 run on 4.0 – not quite! You can compile an application for .NET 4.5 and run it on the 4.0 runtime – that is until you hit a new feature that doesn’t exist on 4.0. At which point the app bombs at runtime. Say you write some code that is mostly .NET 4.0, but only has a few of the new features of .NET 4.5 like aync/await buried deep in the bowels of the application where it only fires occasionally. .NET will happily start your application and run everything 4.0 fine, until it hits that 4.5 code – and then crash unceremoniously at runtime. Oh joy! You can .NET 4.0 applications on .NET 4.5 of course and that should work without much fanfare. Different than .NET 3.0/3.5 Note that this in-place replacement is very different from the side by side installs of .NET 2.0 and 3.0/3.5 which all ran on the 2.0 version of the CLR. The two 3.x versions were basically library enhancements on top of the core .NET 2.0 runtime. Both versions ran under the .NET 2.0 runtime which wasn’t changed (other than for security patches and bug fixes) for the whole 3.x cycle. The 4.5 update instead completely replaces the .NET 4.0 runtime and leaves the actual version number set at v4.0.30319. When you build a new project with Visual Studio 2011, you can still target .NET 4.0 or you can target .NET 4.5. But you are in effect referencing the same set of assemblies for both regardless which version you use. What's different is the compiler used to compile and link your code so compiling with .NET 4.0 gives you just the subset of the functionality that is available in .NET 4.0, but when you use the 4.5 compiler you get the full functionality of what’s actually available in the assemblies and extra libraries. It doesn’t look like you will be able to use Visual Studio 2010 to develop .NET 4.5 applications. Good news – Bad news Microsoft is trying hard to experiment with every possible permutation of releasing new versions of the .NET framework apparently. No two updates have been the same. Clearly updating to a full new version of .NET (ie. .NET 2.0, 4.0 and at some point 5.0 runtimes) has its own set of challenges, but doing an in-place update of the runtime and then not even providing a good way to tell which version is installed is pretty whacky even by Microsoft’s standards. Especially given that .NET 4.5 includes a fairly significant update with all the aysnc functionality baked into the runtime. Most of the IO APIs have been updated to support task based async operation which significantly affects many existing APIs. To make things worse .NET 4.5 will be the initial version of .NET that ships with Windows 8 so it will be with us for a long time to come unless Microsoft finally decides to push .NET versions onto Windows machines as part of system upgrades (which currently doesn’t happen). This is the same story we had when Vista launched with .NET 3.0 which was a minor version that quickly was replaced by 3.5 which was more long lived and practical. People had enough problems dealing with the confusing versioning of the 3.x versions which ran on .NET 2.0. I can’t count the amount support calls and questions I’ve fielded because people couldn’t find a .NET 3.5 entry in the IIS version dialog. The same is likely to happen with .NET 4.5. It’s all well and good when we know that .NET 4.5 is an in-place replacement, but administrators and IT folks not intimately familiar with .NET are unlikely to understand this nuance and end up thoroughly confused which version is installed. It’s hard for me to see any upside to an in-place update and I haven’t really seen a good explanation of why this approach was decided on. Sure if the version stays the same existing assembly bindings don’t break so applications can stay running through an update. I suppose this is useful for some component vendors and strongly signed assemblies in corporate environments. But seriously, if you are going to throw .NET 4.5 into the mix, who won’t be recompiling all code and thoroughly test that code to work on .NET 4.5? A recompile requirement doesn’t seem that serious in light of a major version upgrade.  Resources http://blogs.msdn.com/b/dotnet/archive/2011/09/26/compatibility-of-net-framework-4-5.aspx http://www.devproconnections.com/article/net-framework/net-framework-45-versioning-faces-problems-141160© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • SQL SERVER – Beginning of SQL Server Architecture – Terminology – Guest Post

    - by pinaldave
    SQL Server Architecture is a very deep subject. Covering it in a single post is an almost impossible task. However, this subject is very popular topic among beginners and advanced users.  I have requested my friend Anil Kumar who is expert in SQL Domain to help me write  a simple post about Beginning SQL Server Architecture. As stated earlier this subject is very deep subject and in this first article series he has covered basic terminologies. In future article he will explore the subject further down. Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. In this Article we will discuss about MS SQL Server architecture. The major components of SQL Server are: Relational Engine Storage Engine SQL OS Now we will discuss and understand each one of them. 1) Relational Engine: Also called as the query processor, Relational Engine includes the components of SQL Server that determine what your query exactly needs to do and the best way to do it. It manages the execution of queries as it requests data from the storage engine and processes the results returned. Different Tasks of Relational Engine: Query Processing Memory Management Thread and Task Management Buffer Management Distributed Query Processing 2) Storage Engine: Storage Engine is responsible for storage and retrieval of the data on to the storage system (Disk, SAN etc.). to understand more, let’s focus on the following diagram. When we talk about any database in SQL server, there are 2 types of files that are created at the disk level – Data file and Log file. Data file physically stores the data in data pages. Log files that are also known as write ahead logs, are used for storing transactions performed on the database. Let’s understand data file and log file in more details: Data File: Data File stores data in the form of Data Page (8KB) and these data pages are logically organized in extents. Extents: Extents are logical units in the database. They are a combination of 8 data pages i.e. 64 KB forms an extent. Extents can be of two types, Mixed and Uniform. Mixed extents hold different types of pages like index, System, Object data etc. On the other hand, Uniform extents are dedicated to only one type. Pages: As we should know what type of data pages can be stored in SQL Server, below mentioned are some of them: Data Page: It holds the data entered by the user but not the data which is of type text, ntext, nvarchar(max), varchar(max), varbinary(max), image and xml data. Index: It stores the index entries. Text/Image: It stores LOB ( Large Object data) like text, ntext, varchar(max), nvarchar(max),  varbinary(max), image and xml data. GAM & SGAM (Global Allocation Map & Shared Global Allocation Map): They are used for saving information related to the allocation of extents. PFS (Page Free Space): Information related to page allocation and unused space available on pages. IAM (Index Allocation Map): Information pertaining to extents that are used by a table or index per allocation unit. BCM (Bulk Changed Map): Keeps information about the extents changed in a Bulk Operation. DCM (Differential Change Map): This is the information of extents that have modified since the last BACKUP DATABASE statement as per allocation unit. Log File: It also known as write ahead log. It stores modification to the database (DML and DDL). Sufficient information is logged to be able to: Roll back transactions if requested Recover the database in case of failure Write Ahead Logging is used to create log entries Transaction logs are written in chronological order in a circular way Truncation policy for logs is based on the recovery model SQL OS: This lies between the host machine (Windows OS) and SQL Server. All the activities performed on database engine are taken care of by SQL OS. It is a highly configurable operating system with powerful API (application programming interface), enabling automatic locality and advanced parallelism. SQL OS provides various operating system services, such as memory management deals with buffer pool, log buffer and deadlock detection using the blocking and locking structure. Other services include exception handling, hosting for external components like Common Language Runtime, CLR etc. I guess this brief article gives you an idea about the various terminologies used related to SQL Server Architecture. In future articles we will explore them further. Guest Author  The author of the article is Anil Kumar Yadav is Trainer, SQL Domain, Koenig Solutions. Koenig is a premier IT training firm that provides several IT certifications, such as Oracle 11g, Server+, RHCA, SQL Server Training, Prince2 Foundation etc. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

    Read the article

  • How to copy items using Nintex Workflow

    - by ybbest
    Nintex does not offer copying items from one SharePoint library to another out of box. However, it is not hard to implement one yourself. You can use the copy.asmx web services to achieve this. Here are the steps below and you can download the source here 1. Create a UDA with the following parameters: 2. Call the copy.asmx service to copy the item from SouceItemUrl to DestinationItemUrl 3. If your destination document library has versioning and check-in/out turned on , you can use list.asmx to check in your file as below: 4. You need to create constant of Credential type named SP_WORKFLOW_WS as below 5. Here is how it looks like in the Workflow designer. 6. To call this UDA, you can perform the following in your workflow

    Read the article

  • New Tuxedo White Papers

    - by todd.little
    As part of the Tuxedo 11gR1 release, I've written two new white papers on Tuxedo. One is called "Tuxedo in a SOA World" and discusses how Tuxedo fits into SOA based applications. It covers most of the various connectivity options from Tuxedo into SOA environments and gives guidance as to which connectivity options are best suited for a particular application requirement. The other white paper "SCA: Bringing Modern SOA Programing to Tuxedo" is of a more technical bent and focuses on using the SCA features in SALT to easily build SOA based applications on Tuxedo without using a lot of technical APIs. In fact, services built using SALT's SCA support don't require any technical APIs, just pure business logic, and SCA clients need at most a couple of API calls, simply to look up a service. You can find these two new white papers as well as some additional white papers at http://www.oracle.com/technology/products/tuxedo/index.html.

    Read the article

  • This Week in Geek History: NORAD Tracks Santa, First HTTP Test, Babbage’s Birthday

    - by Jason Fitzpatrick
    History trivia shouldn’t be limited to just treaty dates and wars ending, we’re marking off major milestones in geek history—one week at at time. This week in history we’ve got Santa on the Cold War radar, baby HTTP going for a spin, and Babbage’s birth to help usher in the age of computers. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? An Alternate Star Wars Christmas Special [Video] Sunset in a Tropical Paradise Wallpaper Natural Wood Grain Icons for Your Desktop and App Launcher Docks My Blackberry Is Not Working! The Apple Too?! [Funny Video] Hidden Tracks Your Stolen Mac; Free Until End of January Why the Other Checkout Line Always Moves Faster

    Read the article

  • Management and Monitoring Tools for Windows Azure

    - by BuckWoody
    With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

    Read the article

  • SiriProxy Harnesses Siri’s Voice Processing to Control Thermostats and More

    - by Jason Fitzpatrick
    iOS: This clever hack taps into the Siri voice agent in iPhone 4S units and allows a proxy service to execute commands outside the normal range of Siri’s behavior–like adjusting the thermostat. It’s a highly experimental hack but it showcases the great potential for Siri-based interaction with a wide range of services and network devices. In the above video Apple enthusiast Plamoni demonstrates how, using SiriProxy, he can check and control his home thermostat. Watch the video the see it in action and, if you feel like riding the edge of experimental and unapproved iPhone antics, you can hit up the link below for the source code and additional documentation. SiriProxy [via ExtremeTech] HTG Explains: When Do You Need to Update Your Drivers? How to Make the Kindle Fire Silk Browser *Actually* Fast! Amazon’s New Kindle Fire Tablet: the How-To Geek Review

    Read the article

  • Silverlight Cream for December 05, 2010 -- #1003

    - by Dave Campbell
    In this (Almost) All-Submittal Issue: John Papa(-2-), Jesse Liberty, Tim Heuer, Dan Wahlin, Markus Egger, Phil Middlemiss, Coding4Fun, Michael Washington, Gill Cleeren, MichaelD!, Colin Eberhardt, Kunal Chowdhury, and Rabeeh Abla. Above the Fold: Silverlight: "Two-Way Binding on TreeView.SelectedItem" Phil Middlemiss WP7: "Taking Screen Shots of Windows Phone 7 Panorama Apps" Markus Egger Training: "Beginners Guide to Visual Studio LightSwitch (Part - 4)" Kunal Chowdhury Shoutouts: Don't let the fire go out... check out the Firestarter Labs Bart Czernicki discusses the need for 64-bit Silverlight: Why a 64-bit runtime for Silverlight 5 Matters Laurent Duveau is interviewed by the SilverlightShow folks to discuss his WP7 app: Laurent Duveau on Morse Code Flash Light WP7 Application From SilverlightCream.com: John Papa: Silverlight 5 Features John Papa has a post up highlighting his take on what's cool in the new featureset for Silverlight 5... including an external link to the keynote. Silverlight Firestarter Keynote and Sessions John Papa also has posted links to all the individual session videos... what a great resource! Yet Another Podcast #17 – Scott Guthrie Jesse Liberty went big with his latest Yet Another Podcast ... he is interviewing Scott Guthrie about the Firestarter, Silverlight, WP7. and more. Silverlight 5 Plans Revealed With this post from Tim Heuer, I find myself adding a Silverlight 5 tag... so bring on the fun! ... unless you've been overloaded like I have since last Thursday, you've probably seen this, but what the heck... Silverlight Firestarter Wrap Up and WCF RIA Services Talk Sample Code Phoenix's own Dan Wahlin had a great WCF RIA Services presentation at the Firestarter last week, and his material and lots of other good links are up on his blog, and I'd say that even if he didn't have a couple shoutouts to me in it :) Thanks Dan!! Taking Screen Shots of Windows Phone 7 Panorama Apps Markus Egger helps us all out with a post on how to get screenshots of your WP7 Panorama app... in case you haven't tried it ... it's not as easy as it sounds! Two-Way Binding on TreeView.SelectedItem Phil Middlemiss is back with a post taking some of the mystery out of the TreeView control bound to a data context and dealing with the SelectedItem property... oh yeah, and throw all that into MVVM! Great tutorial as usual, a cool behavior, and all the source. Native Extensions for Microsoft Silverlight Alan Cobb pointed me to a quick post up on the Coding4Fun site about the NESL (Native Extensions for SilverLight) from Microsoft that give access to some cool features of Windows 7 from Silverlight... I added an NESL tag in case other posts appear on this subject. Silverlight Simple Drag And Drop / Or Browse View Model / MVVM File Upload Control Michael Washington has another great tutorial up at CodeProject that expands on prior work he'd done with drag/drop file upload with this post on integrating an updated browse/upload into ViewModel/MVVM projects, all of which is Blendable. The validation story in Silverlight (Part 1) In good news for all of us, Gill Cleeren has started a tutorial series at SilverlightShow on Silverlight Validation. The first one is up discussing the basics... The Common Framework MichaelD! has a WPF/Silverlight framework up with Facebook Authentication, Xaml-driven IOC, T4 synchronous WCF proxies, and WP7 on the roadmap... source on CodePlex, check it out and give him some feedback. Exploring Reactive Extensions (Rx) through Twitter and Bing Maps Mashups If you've been waiting around to learn Rx, Colin Eberhardt has the post up for you (and me)... great tutorial up on Twitter and Bing Maps Mashups ... and all the code... for the twitter immediate app, and also the UKSnow one we showed last week... check out the demo page, and grab the source! Beginners Guide to Visual Studio LightSwitch (Part - 4) Kunal Chowdhury has the 4th part of his Lightswitch tutorial series up at SilverlightShow. In this one, he shows how to integrate multiple tables into a screen. It is here Take Your Silverlight Application Full Screen & intercept all windows keys !! Rabeeh Abla sent me this link to the blog describing a COM exposed library that intercepts all keys when Silverlight is full-screen. There are a few I hit when I'm going through blogs that Ctrl-W (FF) just won't take down and that annoys me... so this might be a solution if you have that problem... worth a look anyway! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Fundtech’s Global PAYplus Achieves Oracle Exadata and Oracle Exalogic Optimized Status

    - by Javier Puerta
    Fundtech, a leader in global transaction banking solutions, has announced  that Global PAYplus® – Services Platform (GPP-SP) version 4 has achieved Oracle Exadata Optimized and Oracle Exalogic Optimized status. (Read full announcement here) "GPP-SP testing was done in the third quarter of 2012 in the Oracle Exastack Lab located in the Oracle Solution Center in Linlithgow, Scotland. It showed that an integrated solution can result in a highly streamlined installation, enabling reduced cost of evaluation, acquisition and ownership. Highlights of the transaction processing test are as follows: 9.3 million Mass Payments per hour 5.7 million Single Payments per hour The test found that the optimized combination of GPP-SP running on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud is able to increase transactions per second (TPS) output per core, and able to reduce total cost of ownership (TCO). The volumes achieved were using only 25% of Exadata/Exalogic processing capacity".

    Read the article

< Previous Page | 531 532 533 534 535 536 537 538 539 540 541 542  | Next Page >