Search Results

Search found 14601 results on 585 pages for 'ms live at edu'.

Page 536/585 | < Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >

• OpenVPN: Connection established but can’t connect to server

  - by Maik

  I am trying to set up OpenVPN to allow me to connect a number of laptops to my network in a way that allows the laptops to connect to specific computers via HTTP (to e.g. a server management page) and windows shares (to access files) In the test environment my laptops live in a network with a 192.168.1.X address range. The host-network has a 10.66.77.X address range The server hosting the OpenVPN server has address 10.77.10.20. I need to access some application server web pages on this machine, accessible on various ports The server with the windows shares as well as some other web based pages I need to access is on address 10.66.77.20 The config files for server and laptop are attached below. The laptop establishes the VPN connection without problems, but I cannot access any of the machines, even a simple ping fails. Maybe a routing problem? The routing table for the laptop is shown below as well - every idea is appreciated! Thanks! Maik Server config file port 1194 dev tun tls-server ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/projects.crt key /etc/openvpn/keys/projects.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 10.66.77.0 255.255.255.0" keepalive 10 60 inactive 600 route 10.8.0.1 255.255.255.0 user openvpn group openvpn persist-tun persist-key verb 4 client config file dev tun proto udp remote SERVERADDR 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert accountingLaptop.crt key accountingLaptop.key ns-cert-type server comp-lzo verb 3 Resulting routing table on client laptop C:\Documents and Settings\User>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 23 5a 9b 64 9b ...... Atheros AR8132 PCI-E Fast Ethernet Controller - Packet Scheduler Miniport 0x3 ...00 24 2c 35 c9 6b ...... Dell Wireless 1395 WLAN Mini-Card - Packet Sched uler Miniport 0x4 ...00 ff 5e 03 43 9b ...... TAP-Win32 Adapter V9 - Packet Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.129 25 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 1 10.8.0.4 255.255.255.252 10.8.0.6 10.8.0.6 30 10.8.0.6 255.255.255.255 127.0.0.1 127.0.0.1 30 10.66.77.0 255.255.255.0 10.8.0.5 10.8.0.6 1 10.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.129 192.168.1.129 25 192.168.1.129 255.255.255.255 127.0.0.1 127.0.0.1 25 192.168.1.255 255.255.255.255 192.168.1.129 192.168.1.129 25 224.0.0.0 240.0.0.0 10.8.0.6 10.8.0.6 30 224.0.0.0 240.0.0.0 192.168.1.129 192.168.1.129 25 255.255.255.255 255.255.255.255 10.8.0.6 2 1 255.255.255.255 255.255.255.255 10.8.0.6 10.8.0.6 1 255.255.255.255 255.255.255.255 192.168.1.129 192.168.1.129 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None

  Read the article

• Why do I get "unsupported architecture" errors trying to install a Python library in OSX?

  - by Emma518

  I am trying to install a Python library in the Presto package, source http://www.cv.nrao.edu/~sransom/presto/ Using 'gmake fftfit' I get the following error: cd fftfit_src ; f2py-2.7 -c fftfit.pyf *.f running build running config_cc unifing config_cc, config, build_clib, build_ext, build commands --compiler options running config_fc unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options running build_src build_src building extension "fftfit" sources creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 f2py options: [] f2py: fftfit.pyf Reading fortran codes... Reading file 'fftfit.pyf' (format:free) Post-processing... Block: fftfit Block: cprof Block: fftfit Post-processing (stage 2)... Building modules... Building module "fftfit"... Constructing wrapper function "cprof"... c,amp,pha = cprof(y,[nmax,nh]) Constructing wrapper function "fftfit"... shift,eshift,snr,esnr,b,errb,ngood = fftfit(prof,s,phi,[nmax]) Wrote C/API module "fftfit" to file "/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64- 2.7/fftfitmodule.c" adding '/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fortranobject.c' to sources. adding '/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7' to include_dirs. copying /Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9- intel.egg/numpy/f2py/src/fortranobject.c -> /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 copying /Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9-intel.egg/numpy/f2py/src/fortranobject.h -> /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 build_src: building npy-pkg config files running build_ext customize UnixCCompiler customize UnixCCompiler using build_ext customize Gnu95FCompiler Found executable /usr/local/bin/gfortran customize Gnu95FCompiler customize Gnu95FCompiler using build_ext building 'fftfit' extension compiling C sources C compiler: /usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch ppc -arch i386 -arch x86_64 -g -O2 creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T/tmp9MmLz8 creating /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7 compile options: '-I/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9- x86_64-2.7 -I/Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9- intel.egg/numpy/core/include - I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c' clang: /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64- 2.7/fftfitmodule.c In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/ 5.1/include/limits.h:38: In file included from /usr/include/limits.h:63: /usr/include/sys/cdefs.h:658:2: error: Unsupported architecture #error Unsupported architecture ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/ 5.1/include/limits.h:38: In file included from /usr/include/limits.h:64: /usr/include/machine/limits.h:8:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: In file included from /usr/include/sys/_types.h:33: /usr/include/machine/_types.h:34:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: /usr/include/sys/_types.h:94:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_blkcnt_t; /* total blocks */ ^ /usr/include/sys/_types.h:95:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_blksize_t; /* preferred block size */ ^ /usr/include/sys/_types.h:96:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_dev_t; /* dev_t */ ^ /usr/include/sys/_types.h:99:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_gid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:100:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_id_t; /* [XSI] pid_t, uid_t, or gid_t*/ ^ /usr/include/sys/_types.h:101:9: error: unknown type name '__uint64_t' typedef __uint64_t __darwin_ino64_t; /* [???] Used for 64 bit inodes */ ^ /usr/include/sys/_types.h:107:9: error: unknown type name '__darwin_natural_t' typedef __darwin_natural_t __darwin_mach_port_name_t; /* Used by mach */ ^ /usr/include/sys/_types.h:109:9: error: unknown type name '__uint16_t' typedef __uint16_t __darwin_mode_t; /* [???] Some file attributes */ ^ /usr/include/sys/_types.h:110:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_off_t; /* [???] Used for file sizes */ ^ /usr/include/sys/_types.h:111:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_pid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:131:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_sigset_t; /* [???] signal set */ ^ /usr/include/sys/_types.h:132:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_suseconds_t; /* [???] microseconds */ ^ /usr/include/sys/_types.h:133:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_uid_t; /* [???] user IDs */ ^ /usr/include/sys/_types.h:134:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_useconds_t; /* [???] microseconds */ ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:71: /usr/include/sys/_types/_va_list.h:31:9: error: unknown type name '__darwin_va_list'; did you mean '__builtin_va_list'? typedef __darwin_va_list va_list; ^ note: '__builtin_va_list' declared here In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:72: /usr/include/sys/_types/_size_t.h:30:9: error: unknown type name '__darwin_size_t'; did you mean '__darwin_ino_t'? typedef __darwin_size_t size_t; ^ /usr/include/sys/_types.h:103:26: note: '__darwin_ino_t' declared here typedef __darwin_ino64_t __darwin_ino_t; /* [???] Used for inodes */ ^ fatal error: too many errors emitted, stopping now [-ferror-limit=] 20 errors generated. In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/5.1/include/limits.h:38: In file included from /usr/include/limits.h:63: /usr/include/sys/cdefs.h:658:2: error: Unsupported architecture #error Unsupported architecture ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:19: In file included from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/../lib/clang/ 5.1/include/limits.h:38: In file included from /usr/include/limits.h:64: /usr/include/machine/limits.h:8:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: In file included from /usr/include/sys/_types.h:33: /usr/include/machine/_types.h:34:2: error: architecture not supported #error architecture not supported ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:67: In file included from /usr/include/_types.h:27: /usr/include/sys/_types.h:94:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_blkcnt_t; /* total blocks */ ^ /usr/include/sys/_types.h:95:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_blksize_t; /* preferred block size */ ^ /usr/include/sys/_types.h:96:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_dev_t; /* dev_t */ ^ /usr/include/sys/_types.h:99:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_gid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:100:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_id_t; /* [XSI] pid_t, uid_t, or gid_t*/ ^ /usr/include/sys/_types.h:101:9: error: unknown type name '__uint64_t' typedef __uint64_t __darwin_ino64_t; /* [???] Used for 64 bit inodes */ ^ /usr/include/sys/_types.h:107:9: error: unknown type name '__darwin_natural_t' typedef __darwin_natural_t __darwin_mach_port_name_t; /* Used by mach */ ^ /usr/include/sys/_types.h:109:9: error: unknown type name '__uint16_t' typedef __uint16_t __darwin_mode_t; /* [???] Some file attributes */ ^ /usr/include/sys/_types.h:110:9: error: unknown type name '__int64_t' typedef __int64_t __darwin_off_t; /* [???] Used for file sizes */ ^ /usr/include/sys/_types.h:111:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_pid_t; /* [???] process and group IDs */ ^ /usr/include/sys/_types.h:131:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_sigset_t; /* [???] signal set */ ^ /usr/include/sys/_types.h:132:9: error: unknown type name '__int32_t' typedef __int32_t __darwin_suseconds_t; /* [???] microseconds */ ^ /usr/include/sys/_types.h:133:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_uid_t; /* [???] user IDs */ ^ /usr/include/sys/_types.h:134:9: error: unknown type name '__uint32_t' typedef __uint32_t __darwin_useconds_t; /* [???] microseconds */ ^ In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:71: /usr/include/sys/_types/_va_list.h:31:9: error: unknown type name '__darwin_va_list'; did you mean '__builtin_va_list'? typedef __darwin_va_list va_list; ^ note: '__builtin_va_list' declared here In file included from /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.c:16: In file included from /opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7/Python.h:33: In file included from /usr/include/stdio.h:72: /usr/include/sys/_types/_size_t.h:30:9: error: unknown type name '__darwin_size_t'; did you mean '__darwin_ino_t'? typedef __darwin_size_t size_t; ^ /usr/include/sys/_types.h:103:26: note: '__darwin_ino_t' declared here typedef __darwin_ino64_t __darwin_ino_t; /* [???] Used for inodes */ ^ fatal error: too many errors emitted, stopping now [-ferror-limit=] 20 errors generated. error: Command "/usr/bin/clang -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -arch ppc -arch i386 -arch x86_64 -g -O2 -I/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx- 10.9-x86_64-2.7 -I/Library/Python/2.7/site-packages/numpy-1.8.2-py2.7-macosx-10.9- intel.egg/numpy/core/include - I/opt/local/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.c -o /var/folders/sx/j_l_qvys4bv00_38pfvy3m8h0000gp/T/tmp9MmLz8/var/folders/sx/j_l_qvys4bv00_38pfvy3m8h00 00gp/T/tmp9MmLz8/src.macosx-10.9-x86_64-2.7/fftfitmodule.o" failed with exit status 1 Makefile:5: recipe for target 'fftfit' failed gmake: *** [fftfit] Error 1 How can I solve this architecture problem?

  Read the article

• How can I run supervisord without using root?

  - by Jason Baker

  I seem to be having trouble figuring out why supervisord won't run as a non-root user. If I start it with the user set to jason (pid 1000), I get the following in the log file: 2010-05-24 08:53:32,143 CRIT Set uid to user 1000 2010-05-24 08:53:32,143 WARN Included extra file "/home/jason/src/tsched/celeryd.conf" during parsing 2010-05-24 08:53:32,189 INFO RPC interface 'supervisor' initialized 2010-05-24 08:53:32,189 WARN cElementTree not installed, using slower XML parser for XML-RPC 2010-05-24 08:53:32,189 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2010-05-24 08:53:32,190 INFO daemonizing the supervisord process 2010-05-24 08:53:32,191 INFO supervisord started with pid 3444 ...then the process dies for some unknown reason. If I start it without sudo (under the user jason), I get similar output: 2010-05-24 08:51:32,859 INFO supervisord started with pid 3306 2010-05-24 08:52:15,761 CRIT Can't drop privilege as nonroot user 2010-05-24 08:52:15,761 WARN Included extra file "/home/jason/src/tsched/celeryd.conf" during parsing 2010-05-24 08:52:15,807 INFO RPC interface 'supervisor' initialized 2010-05-24 08:52:15,807 WARN cElementTree not installed, using slower XML parser for XML-RPC 2010-05-24 08:52:15,807 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2010-05-24 08:52:15,808 INFO daemonizing the supervisord process 2010-05-24 08:52:15,809 INFO supervisord started with pid 3397 ...and it still doesn't run. If it's any help, here's the supervisord.conf file I'm using: [unix_http_server] file=/tmp/supervisor.sock ; path to your socket file [supervisord] logfile=./supervisord.log ; supervisord log file logfile_maxbytes=50MB ; maximum size of logfile before rotation logfile_backups=10 ; number of backed up logfiles loglevel=debug ; info, debug, warn, trace pidfile=./supervisord.pid ; pidfile location nodaemon=false ; run supervisord as a daemon minfds=1024 ; number of startup file descriptors minprocs=200 ; number of process descriptors user=jason ; default user childlogdir=./supervisord/ ; where child log files will live [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///tmp/supervisor.sock ; use unix:// schem for a unix sockets. [include] # Uncomment this line for celeryd for Python files=celeryd.conf # Uncomment this line for celeryd for Django. ;files=django/celeryd.conf ...and here's celeryd.conf: [program:celery] command=bin/celeryd --loglevel=INFO --logfile=./celeryd.log environment=PYTHONPATH='./tsched_worker', JIVA_DB_PLATFORM='oracle', ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server', LD_LIBRARY_PATH='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib', TNS_ADMIN='/home/jason', CELERY_CONFIG_MODULE='tsched_worker.celeryconfig' directory=. user=jason numprocs=1 stdout_logfile=/var/log/celeryd.log stderr_logfile=/var/log/celeryd.log autostart=true autorestart=true startsecs=10 ; Need to wait for currently executing tasks to finish at shutdown. ; Increase this if you have very long running tasks. stopwaitsecs = 600 ; if rabbitmq is supervised, set its priority higher ; so it starts first priority=998 Can anyone help me figure out what's going on?

  Read the article

• Ubuntu: Failure to login with multiple video adapters

  - by tsilb

  Forgive my ignorance, for I am a complete linux noob. I have a computer with three video cards and six monitors. Works great on Windows. Trying to get it to run Ubuntu as well. It loads fine when I have it configured to run on one adapter; detects both screens, runs ok. But I want to turn the other 4 monitors on and run the whole thing as one extended desktop (one session, etc). So I downloaded and installed the newest ATI driver for Linux, which seems to work, kinda. I ran this to set up the screens: aticonfig --adapter=all --initial -f Now when I boot, Ubuntu seems to turn on all the screens (3 viewports, each with two cloned displays from what I can tell). When I enter my login info OR move the mouse off the main screen, the screens freeze and the kbd/ms become unresponsive. aticonfig generated xorg.conf included below. Have tried the following: aticonfig -initial -f - works, but only detects the primary adapter and 2 screens aticccle - Tells me I have to reboot after enabling the other cards. Then goes into above described freezing state. aticonfig --adapter=all --initial -f - see above Manually editing xorg.conf file with my limited knowledge - Was able to get two adapters running, but only the second adapter initialized while the primary stopped at the Ubuntu boot screen. Was unable to see the login prompt. Froze after I logged in blindly (was able to hear the login sound). Using generic "radeon" driver instead of ATI Proprietary driver with the above init attempts Toggling xinerama Various combinations of the above Hardware: Intel Core 2 Quad q6600 8GB DDR2 (3x) ATI Radeon HD 4680 5 monitors (21W, 21W, 22W Portrait, 22W Portrait, 19")and an HDTV (26"W, HDMI) in a horizontal arrangement I know next to nothing about Linux/Ubuntu aside from basic filesystem navigation, editing text files, and accessing my local and networked Windows stores and shares. Basically this is the most advanced thing I've had to do. I installed today. Please advise how to make this configuration work. my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[2]-0" RightOf "aticonfig-Screen[1]-0" Option "RenderAccel" "true" Option "AllowGLXWithComposite" "true" EndSection Section "Files" EndSection Section "Module" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[2]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[2]-0" Driver "fglrx" BusID "PCI:4:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[2]-0" Device "aticonfig-Device[2]-0" Monitor "aticonfig-Monitor[2]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Postfix/SMTPD Relay Access Denied when sending outside the network

  - by David

  I asked a very similar question some 4 or 5 months ago, but haven't tracked down a suitable answer. I decided to post a new question so that I can ... a) Post updated info b) post my most current postconf -n output When a user sends mail from inside the network (via webmail) to email addresses both inside and outside the network, the email is delivered. When a user with an email account on the system sends mail from outside the network, using the server as the relay, to addresses inside the network, the email is delivered. But [sometimes] when a user connects via SMTPD to send email to an external address, a Relay Access Denied error is returned: Feb 25 19:33:49 myers postfix/smtpd[8044]: NOQUEUE: reject: RCPT from host-68-169-158-182.WISOLT2.epbfi.com[68.169.158.182]: 554 5.7.1 <host-68-169-158-182.WISOLT2.epbfi.com[68.169.158.182]>: Client host rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<my-computer-name> Feb 25 19:33:52 myers postfix/smtpd[8044]: disconnect from host-68-169-158-182.WISOLT2.epbfi.com[68.169.158.182] Sending this through Microsoft Outlook 2003 generates the above log. However, sending through my iPhone, with the exact same settings, goes through fine: Feb 25 19:37:18 myers postfix/qmgr[3619]: A2D861302C9: from=<[email protected]>, size=1382, nrcpt=1 (queue active) Feb 25 19:37:18 myers amavis[2799]: (02799-09) FWD via SMTP: <[email protected]> -> <[email protected]>,BODY=7BIT 250 2.0.0 Ok, id=02799-09, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as A2D861302C9 Feb 25 19:37:18 myers amavis[2799]: (02799-09) Passed CLEAN, [68.169.158.182] [68.169.158.182] <[email protected]> -> <[email protected]>, Message-ID: <[email protected]>, mail_id: yMLvzVQJloFV, Hits: -9.607, size: 897, queued_as: A2D861302C9, 6283 ms Feb 25 19:37:18 myers postfix/lmtp[8752]: 2ED3A1302C8: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=6.6, delays=0.25/0.01/0.19/6.1, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=02799-09, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as A2D861302C9) Feb 25 19:37:18 myers postfix/qmgr[3619]: 2ED3A1302C8: removed Outgoing Settings on Outlook 2003 match the settings on my iPhone: SMTP server: mail.my-domain.com Username: My full email address Uses SSL Server Port 587 Now, here's postconf -n. I realize the "My Networks" Parameter is a bit nasty. I have these IP addresses in here for just this reason, as others have been complaining of this problem too: alias_database = hash:/etc/postfix/aliases alias_maps = $alias_database append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix content_filter = amavisfeed:[127.0.0.1]:10024 daemon_directory = /usr/libexec/postfix debug_peer_level = 2 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mail_spool_directory = /var/spool/mail mailbox_size_limit = 0 mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man message_size_limit = 20480000 mydestination = $myhostname, localhost, localhost.$mydomain mydomain = my-domain.com myhostname = myers.my-domain.com mynetworks = 127.0.0.0/8, 74.125.113.27, 74.125.82.49, 74.125.79.27, 209.85.161.0/24, 209.85.214.0/24, 209.85.216.0/24, 209.85.212.0/24, 209.85.160.0/24 myorigin = $myhostname newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES receive_override_options = no_address_mappings recipient_delimiter = + relay_domains = $mydestination sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail setgid_group = postdrop smtp_bind_address = my-primary-server's IP address smtpd_banner = mail.my-domain.com smtpd_helo_required = yes smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/mailserver/postfix.pem smtpd_tls_key_file = /etc/ssl/mailserver/private/postfix.pem smtpd_tls_loglevel = 3 smtpd_tls_received_header = no smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 554 virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf,mysql:/etc/postfix/mysql-email2email.cf virtual_gid_maps = static:5000 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_minimum_uid = 5000 virtual_transport = dovecot virtual_uid_maps = static:5000 If anyone has any ideas and can help me finally solve this issue once and for all, I'd be eternally grateful.

  Read the article

• Linux HA cluster w/Xen, Heartbeat, Pacemaker. domU does not failover to secondary node

  - by Kendall

  I am having the followig problem with an OenSuSE + Heartbeat + Pacemaker + Xen HA cluster: when the node a Xen domU is running on is "dead" the Xen domU running on it is not restarted on the second node. The cluster is setup with two nodes, each running OpenSuSE-11.3, Heartbeat 3.0, and Pacemaker 1.0 in CRM mode. For storage I am using a LUN on an iSCSI SAN device; the LUN is formatted with OCFS2 and managed with LVM. The Xen domU has two logical volumes; one for root and the other for swap. I am using IPMI cards for STONITH devices, and a dedicated ethernet link for heartbeat communications. The ha.cf file is as follows: keepalive 1 deadtime 10 warntime 5 udpport 694 ucast eth1 auto_failback off node dhcp-166 node stage use_logd yes crm yes My resources look as follows: shocrm(live)configure# show node $id="5c1aa924-bba4-4f95-a367-6c9a58ac4a38" dhcp-166 node $id="cebc92eb-af24-4833-aaf0-672adf80b58e" stage primitive Xen-Util ocf:heartbeat:Xen \ meta target-role="Started" \ operations $id="Xen-Util-operations" \ op start interval="0" timeout="60" start-delay="0" \ op stop interval="0" timeout="120" \ params xmfile="/etc/xen/vm/xen-util" primitive my-stonith stonith:external/ipmi \ params hostname="dhcp-166" ipaddr="192.168.3.106" userid="ADMIN" passwd="xxx" \ op monitor interval="2m" timeout="60s" primitive my-stonith2 stonith:external/ipmi \ params hostname="stage" ipaddr="192.168.3.105" userid="ADMIN" passwd="xxx" \ op monitor interval="2m" timeout="60s" property $id="cib-bootstrap-options" \ dc-version="1.0.9-89bd754939df5150de7cd76835f98fe90851b677" \ cluster-infrastructure="Heartbeat" The Xen domU config file is as follows: name = "xen-util" bootloader = "/usr/lib/xen/boot/domUloader.py" #bootargs = "xvda1:/vmlinuz-xen,/initrd-xen" bootargs = "--entry=xvda1:/boot/vmlinuz-xen,/boot/initrd-xen" memory = 4096 disk = [ 'phy:vg_xen/xen-util-root,xvda1,w', 'phy:vg_xen/xen-util-swap,xvda2,w', ] root = "/dev/xvda1" vif = [ 'mac=00:16:3e:42:42:06' ] #vfb = [ 'type=vnc,vncunused=0,vnclisten=192.168.3.172' ] extra = "" Say domU "Xen-Util" is running on node "stage"; if "stage" goes down, "Xen-Util" does not restart on node "dhcp-166". It seems to want to try as an "xm list" will show it for a few seconds and if you "xm console xen-util" it will give a message like "copying /boot/kernel.gz from xvda1 to /var/lib/xen/tmp/kernel.a53gs for booting". However, it never gets past that, eventually gives up, and no longer appears in "xm list". Now, when node "stage" comes back online after being power cycled, it detects that "Xen-Util" isn't running, and starts it (on stage). I've tried starting "Xen-Util" on node "dhcp-166" without the cluster running, and it works fine. No problems. So, I know it works in that respect. Any ideas? Thanks!

  Read the article

• Unclear pricing of Windows Azure

  - by Dirk

  How do you people think about the Windows Azure pricing model and the way it is presented to the user? I just found out that Azure keeps charging hours for STOPPED instances. I just received a bill from more than 100 euro for 3 STOPPED instances (not) running "HelloAzure". I the past I also played around with Amazon Web Services. Amazon doesn't charge for stopped instances. I was wondering: "Should I have known this before, or is Microsoft doing a bad job in clear communication in the pricing model?" Quote from http://www.microsoft.com/windowsazure/pricing/ : Compute time, measured in service hours: Windows Azure compute hours are charged only for when your application is deployed. When developing and testing your application, developers will want to remove the compute instances that are not being used to minimize compute hour billing. Partial compute hours are billed as full hours. I read this, so I stopped all instances after a few hours playing around. Now it seems I should have deleted them, not just "stopped". Strictly speaking, all depends on the definition of the word "deployed". If you upload an application, but it is not running, can it still be regarded as being "deployed"? May be, but when you read this for the first time, with AWS experience in mind, I don't think it's 100% clear what this means. Technically speaking, an uploaded application only uses (read: should only use / needs only) a few MB harddrive space. It doesn't require any CPU time. If Azure wants to reserve CPU's for not running instances.. well, that's Azure's choice, not mine. I don't want to spread a hate campaign at all, but I do want to know how people think about this subject. Should Microsoft be more clear about their pricing model or do you think it's clear enough? Second question: did anyone got refunded for a similar case? Thanks in advance! UPDATE 27-01-2011 I sent an email to customer support a few days ago, but I guess that didn't reach anu human being because I didn't hear anything from it. So, I made a telephone call today with a Dutch customer support representative (I live in Holland). She totally understood the problem and she's trying to get a refund for me. However, she mentioned that "usually these refund requests are denied", but she's going to try. She also mentioned that I'm not the first one with this (or similar) problem. UPDATE 28-01-2011 I just received a phonecall from Microsoft support. The lady told me some good news: the money will refunded. However, the invoice has not been made yet, and my creditcard will first be chardged, after which it will be refunded, but hey, that's no problem for me! I'm glad the way it's solved! Thanks everybody!

  Read the article

• Apache logs 200 instead of 404

  - by elle

  I've been getting the following in my apache access log: "GET /work//?module=www&section=working=../../../../../../../../../../../../../../../../../../../../../../../..//proc/self/environ%0000 HTTP/1.1" 200 5187 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; pl-PL; rv:1.8.1.24pre) Gecko/20100228 K-Meleon/1.5.4\",\"Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/540.0 (KHTML,like Gecko) Chrome/9.1.0.0 Safari/540.0\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Comodo_Dragon/4.1.1.11 Chrome/4.1.249.1042 Safari/532.5\",\"Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.16) Gecko/2009122206 Firefox/3.0.16 Flock/2.5.6\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.1 (KHTML, like Gecko) Maxthon/3.0.8.2 Safari/533.1\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.8.1.8pre) Gecko/20070928 Firefox/2.0.0.7 Navigator/9.0RC1\",\"Opera/9.99 (Windows NT 5.1; U; pl) Presto/9.9.9\",\"Mozilla/5.0 (Windows; U; Windows NT 6.1; zh-HK) AppleWebKit/533.18.1 (KHTML, like Gecko) Version/5.0.2 Safari/533.18.5\",\"Seamonkey-1.1.13-1(X11; U; GNU Fedora fc 10) Gecko/20081112\",\"Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Win64; x64; Trident/5.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Zune 4.0; Tablet PC 2.0; InfoPath.3; .NET4.0C; .NET4.0E)\",\"Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; .NET4.0C; .NET4.0E; InfoPath.3)" If I try the URL, I get a 404 instead of 200 which the above request received. Is there a way I can confirm that the 200 was real and not spoofed? Where is the long info on the client coming from?

  Read the article

• High CPU from httpd process

  - by KHWeb

  I am currently getting high CPU on a server that is just running a couple of sites with very low traffic. One of the sites is in still development going live soon. However, this site is very very slow...When browsing through its pages I can see that the CPU goes from 30% to 100% for httpd (see top output below). I have tuned httpd & MySQL, Apache Solr, Tomcat for high performance, and I am using APC. Not sure what to do from here or how to find the culprit as I have a bunch of messages on the httpd log and have been chasing dead ends for some time...any help is greatly appreciated. Server: AuthenticAMD, Quad-Core AMD Opteron(tm) Processor 2352, RAM 16GB Linux 2.6.27 64-bit, Centos 5.5 Plesk 9.5.4, MySQL 5.1.48, PHP 5.2.17 Apache/2.2.3 (CentOS) DAV/2 mod_jk/1.2.15 mod_ssl/2.2.3 OpenSSL/0.9.8e-fips-rhel5 PHP/5.2.17 mod_perl/2.0.4 Perl/v5.8.8 Tomcat6-6.0.29-1.jpp5, Tomcat-native-1.1.20-1.el5, Apache Solr top 17595 apache 20 0 1825m 507m 10m R 100.4 3.2 0:17.50 httpd 17596 apache 20 0 1565m 247m 9936 R 83.1 1.5 0:10.86 httpd 17598 apache 20 0 1430m 110m 6472 S 54.5 0.7 0:08.66 httpd 17599 apache 20 0 1438m 124m 12m S 37.2 0.8 0:11.20 httpd 16197 mysql 20 0 13.0g 2.0g 5440 S 9.6 12.6 297:12.79 mysqld 17617 root 20 0 12748 1172 812 R 0.7 0.0 0:00.88 top 8169 tomcat 20 0 4613m 268m 6056 S 0.3 1.7 6:40.56 java httpd error_log [debug] prefork.c(991): AcceptMutex: sysvsem (default: sysvsem) [info] mod_fcgid: Process manager 17593 started [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 17594 for worker proxy:reverse [debug] proxy_util.c(1967): proxy: initialized single connection worker 0 in child 17594 for (*) [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 17595 for worker proxy:reverse [debug] proxy_util.c(1873): proxy: worker proxy:reverse already initialized [notice] child pid 22782 exit signal Segmentation fault (11) [error] (43)Identifier removed: apr_global_mutex_lock(jk_log_lock) failed [debug] util_ldap.c(2021): LDAP merging Shared Cache conf: shm=0x7fd29a5478c0 rmm=0x7fd29a547918 for VHOST: example.com [info] APR LDAP: Built with OpenLDAP LDAP SDK [info] LDAP: SSL support available [info] Init: Seeding PRNG with 256 bytes of entropy [info] Init: Generating temporary RSA private keys (512/1024 bits) [info] Init: Generating temporary DH parameters (512/1024 bits) [debug] ssl_scache_shmcb.c(374): shmcb_init allocated 512000 bytes of shared memory [debug] ssl_scache_shmcb.c(554): entered shmcb_init_memory() [debug] ssl_scache_shmcb.c(576): for 512000 bytes, recommending 4265 indexes [debug] ssl_scache_shmcb.c(619): shmcb_init_memory choices follow [debug] ssl_scache_shmcb.c(621): division_mask = 0x1F [debug] ssl_scache_shmcb.c(623): division_offset = 96 [debug] ssl_scache_shmcb.c(625): division_size = 15997 [debug] ssl_scache_shmcb.c(627): queue_size = 2136 [debug] ssl_scache_shmcb.c(629): index_num = 133 [debug] ssl_scache_shmcb.c(631): index_offset = 8 [debug] ssl_scache_shmcb.c(633): index_size = 16 [debug] ssl_scache_shmcb.c(635): cache_data_offset = 8 [debug] ssl_scache_shmcb.c(637): cache_data_size = 13853 [debug] ssl_scache_shmcb.c(650): leaving shmcb_init_memory()

  Read the article

• Tunnel is up but cannot ping directly connected network

  - by drmanalo

  We configured a site-to-site VPN and here is the topology. I control the network on the left but not the one on the right. All devices in our network has public IPs. Server---ASA5505---Cisco887======Internet=====ASA5510---devices I can see the tunnel is up and can do extended ping using a loopback interface. From the 10.175 and 10.165 networks, they can also ping my loopback address. I can also dial in using a Cisco VPN client, and can connect to the devices on the right. #show crypto session Crypto session current status Interface: Vlan3 Profile: xxx-profile Session status: UP-ACTIVE Peer: 213.121.x.x port 500 IKEv1 SA: local 77.245.x.x/500 remote 213.121.x.x/500 Active IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.175.0.0/255.255.128.0 Active SAs: 0, origin: crypto map IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.165.0.0/255.255.192.0 Active SAs: 2, origin: crypto map #ping 10.165.29.39 source loopback 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.165.29.39, timeout is 2 seconds: Packet sent with a source address of 10.0.20.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/17/20 ms My problem is the devices on the right cannot reach my server. They could only ping the loopback address and nothing else. I'm pasting some diagnostics related to routing thinking perhaps routing is my issue. I can paste all the running-config on my side of network if needed. #show ip int brief Interface IP-Address OK? Method Status Protocol ATM0 unassigned YES NVRAM administratively down down Ethernet0 unassigned YES NVRAM administratively down down FastEthernet0 unassigned YES unset up up connected to ASA FastEthernet1 unassigned YES unset administratively down down FastEthernet2 unassigned YES unset administratively down down FastEthernet3 unassigned YES unset up up Loopback1 10.0.20.65 YES NVRAM up up Loopback2 10.0.20.1 YES NVRAM up up Virtual-Template1 77.245.x.x YES unset up down Virtual-Template2 77.245.x.x YES unset up down Vlan1 unassigned YES unset down down Vlan3 77.245.x.x YES NVRAM up up connected to the Internet #show run | section ip route ip route 0.0.0.0 0.0.0.0 77.245.x.x ip route 213.121.240.36 255.255.255.255 Vlan3 #show access-list Extended IP access list 102 10 permit ip 10.0.20.0 0.0.0.15 10.175.0.0 0.0.127.255 (3332 matches) 20 permit ip 10.0.20.0 0.0.0.15 10.165.0.0 0.0.63.255 (3498 matches) #show vlan-switch VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active 3 VLAN0003 active Fa0, Fa1, Fa2, Fa3 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup #show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP + - replicated route, % - next hop override Gateway of last resort is 77.245.x.x to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 77.245.x.x 10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks C 10.0.20.0/28 is directly connected, Loopback2 L 10.0.20.1/32 is directly connected, Loopback2 C 10.0.20.64/28 is directly connected, Loopback1 L 10.0.20.65/32 is directly connected, Loopback1 S 10.165.0.0/18 [1/0] via 213.121.x.x 77.0.0.0/8 is variably subnetted, 3 subnets, 3 masks S 77.0.0.0/8 [1/0] via 77.245.x.x C 77.245.x.x/29 is directly connected, Vlan3 L 77.245.x.x/32 is directly connected, Vlan3 213.121.x.0/32 is subnetted, 1 subnets S 213.121.x.x is directly connected, Vlan3 I read some of the posts here which lead to NATing issue but I'not sure of my next step. Should I translate my public address to private and route it to the loopback address? (only guessing) CISCO VPN site to site Site-to-Site VPN between two ASA 5505s only working in one direction Hope someone could help. Thanks in advance!

  Read the article

• Coldfusion autorestart

  - by Comcar

  Coldfusion is automatically restarting, a lot. It comes in waves, everything seems fine for a while then the server struggles for a few minutes, restarts a lot then settles down again. I have Fusion Reactor installed, but when CF goes down FR stops logging so it's not really helping. Looking through the archived logs just shows gaps in the logs. These are all the occourances of the phrase "Coldfusion started" today. [root@server2 logs]# grep -i "Coldfusion started" server.log | grep "11/27/12" "Information","main","11/27/12","01:49:35",,"ColdFusion started" "Information","main","11/27/12","01:50:46",,"ColdFusion started" "Information","main","11/27/12","01:52:39",,"ColdFusion started" "Information","main","11/27/12","01:54:08",,"ColdFusion started" "Information","main","11/27/12","01:55:12",,"ColdFusion started" "Information","main","11/27/12","01:56:29",,"ColdFusion started" "Information","main","11/27/12","01:57:36",,"ColdFusion started" "Information","main","11/27/12","01:58:57",,"ColdFusion started" "Information","main","11/27/12","01:59:56",,"ColdFusion started" "Information","main","11/27/12","02:01:38",,"ColdFusion started" "Information","main","11/27/12","02:03:11",,"ColdFusion started" "Information","main","11/27/12","02:04:41",,"ColdFusion started" "Information","main","11/27/12","02:07:53",,"ColdFusion started" "Information","main","11/27/12","02:10:45",,"ColdFusion started" "Information","main","11/27/12","02:11:49",,"ColdFusion started" "Information","main","11/27/12","02:13:09",,"ColdFusion started" "Information","main","11/27/12","02:14:18",,"ColdFusion started" "Information","main","11/27/12","02:15:44",,"ColdFusion started" "Information","main","11/27/12","02:17:06",,"ColdFusion started" "Information","main","11/27/12","02:34:19",,"ColdFusion started" "Information","main","11/27/12","03:01:20",,"ColdFusion started" "Information","main","11/27/12","05:25:59",,"ColdFusion started" "Information","main","11/27/12","06:30:48",,"ColdFusion started" "Information","main","11/27/12","06:36:20",,"ColdFusion started" "Information","main","11/27/12","09:34:07",,"ColdFusion started" "Information","main","11/27/12","09:35:39",,"ColdFusion started" "Information","main","11/27/12","09:36:41",,"ColdFusion started" "Information","main","11/27/12","09:39:15",,"ColdFusion started" "Information","main","11/27/12","09:40:42",,"ColdFusion started" "Information","main","11/27/12","09:42:55",,"ColdFusion started" "Information","main","11/27/12","09:44:23",,"ColdFusion started" "Information","main","11/27/12","09:46:18",,"ColdFusion started" "Information","main","11/27/12","09:47:35",,"ColdFusion started" "Information","main","11/27/12","09:48:53",,"ColdFusion started" "Information","main","11/27/12","09:50:04",,"ColdFusion started" "Information","main","11/27/12","09:51:51",,"ColdFusion started" "Information","main","11/27/12","09:53:05",,"ColdFusion started" "Information","main","11/27/12","09:54:24",,"ColdFusion started" "Information","main","11/27/12","09:55:28",,"ColdFusion started" "Information","main","11/27/12","09:56:38",,"ColdFusion started" "Information","main","11/27/12","09:58:03",,"ColdFusion started" "Information","main","11/27/12","09:59:03",,"ColdFusion started" "Information","main","11/27/12","10:04:37",,"ColdFusion started" "Information","main","11/27/12","12:04:02",,"ColdFusion started" I've been looking at the live server metrics in FR on a second screen all day, the CPU, Memory and requests all seemed fine about 12 midday, then the server rebooted. Looking at the logs for the hour between 9am and 10am (more than 15 restarts in the hour), the CPU never went over 44% usage and the Memory never exceeded 53% usage - in the recorded stats at least. There is no JDBC tracking at the moment, so I'll add that to tracking and see if it's MySQL causing a problem, but can anyone help me narrow down the problem, what would cause Cold Fusion to auto restart, and I'm assuming the auto restart is only happening because Fusion Reactor is installed. It's a Red Hat 5 LAMP stack running Coldfusion 9 and Fusion Reactor 4.5.2

  Read the article

• GRUB 2 freezing at OS selection screen, what could be the cause?

  - by Michael Kjörling

  Mains power is somewhat unreliable where I live, so every now and then, the computer gets rebooted when the PSU can't maintain proper voltage during a brown-out or momentary black-out. It's happened a few times recently that when power is restored, the BIOS POST completes successfully, GRUB starts to load and then freezes. I've seen this at the Welcome to GRUB! message, but it seems to happen more often just past the switch to the graphical OS list. At this point, the computer will not respond to anything (arrow keys, control commands, Ctrl+Alt+Del, ...) - it simply sits there displaying this image, seemingly doing nothing more. At that point, turning the computer off using the power button and letting it sit for a while (cooling down?) has allowed it to boot successfully. Turning the computer off and immediately back on seems to give the same result (successful POST then freeze in GRUB). This behavior began recently, although does not seem to be directly correlated with my hard disk woes (although it may be relevant that GRUB resides on that physical disk, I don't know). Once the computer has booted, it runs without a hitch. I know that a "proper" solution would be to invest in a UPS, but what might be causing behavior like this? I was thinking in terms of perhaps the CPU shutting down as a thermal control measure, but if that was the cause then wouldn't I see similar freezes during use (which I do not)? What else could cause freezes apparently closely but not perfectly related to the BIOS handover from POST to OS bootloader? The BIOS settings are to reset to previous power status after a power loss. Since the PC in question is almost always turned on, this means restore to full power status. I have no expansion cards installed that make any BIOS extensions known by screen output during the boot process, at least, but I do have a few expansion cards installed. Haven't made any changes in that regard in a long time, now. I haven't touched GRUB itself for a long time, whether configuration or binaries, so I don't think that's the problem. Also, it doesn't really make sense that a bug in GRUB would manifest itself only once in a blue moon but significantly more often after a power failure.

  Read the article

• What are the pitfalls of hardlinked files on my desktop PC?

  - by MountainX

  All the identical-content files on my PC are now hardlinked. (My data is completely de-duplicated. It is a consequence of the way I copied my data from my old computer.) What pitfalls do I need to be aware of now that certain actions on one file could silently affect a number of other files? I know that deleting the file I'm working on is not a problem (assuming I deleted it on purpose). It doesn't affect any of the other hardlinked files and I don't see that the delete action would lead to unexpected side effects. Moving or renaming the file is not a problem. I don't see any unexpected consequences. I don't think copying hardlinked files is a problem, but I'm not as confident about any unexpected consequences in this regard. What I have seen is that making a copy (to the same disk) of a hardlinked file with cp keeps the copy hardlinked (i.e., inode number doesn't change in the copy). Copying to another filesystem obviously breaks the hardlink. (I guess one pitfall is forgetting this fact, given that my PC has 3 hard disks.) Changing permissions does affect all linked files. So far this has proven handy. (I made a large number of the hardlinked files read-only.) None of the operations above seem to produce any major unexpected consequences. However, as was pointed out to me by Daniel Beck in a comment, editing or modifying a file can sometimes be a problem. It depends on the tool and maybe the type of edit. (For example, editing small text files using sed seems to always break the link while using nano doesn't.) This introduces the chance that editing one file could affect all the hardlinked files (i.e., alter the original inode). My proposed solution to this is to make all hardlinked files read-only (and that is already mostly the case). If I can't do that for some files, I will unlink those particular files. Is there any problem with this read-only approach? I'm assuming that if I go to edit a file and find it to be read-only, I'll remember to unlink that filename while making it writable. So one pitfall might be forgetting this rule. In that case, I'll have to rely on my backups. Am I correct in the above statements? And what else do I need to know? BTW, I'm running Kubuntu 12.04. I'm also using btrfs. (I have 2 SSD's and 1 HDD in the PC. I will also be adding an external USB HDD. I'm also connected to a network and I mount some NFS shares. I don't assume any of these last bits are relevant to the question, but I'm adding them just in case.) BTW, since I have more than one drive (with separate file systems), to unlink any file all I have to do is copy it to another drive, then move it back. However, using sed also works (in my testing). Here's my script: sed -i 's/\(.\)/\1/' file1 Surprisingly, this even unlinks zero byte files. In my testing it also appears to work on non-text files without any special options. (But I understand that the --binary option might be needed on Windows, MS-DOS and Cygwin.) However, copying to another disk and moving back may be the best way to unlink. For my use-case, unlink command doesn't really "unlink", rather it "removes".

  Read the article

• Breaking the Outlook 2010 e-mail blue quote line for inline responses

  - by Jez

  This has to be the most infuriating regression from Outlook 2003 to 2007. It also exists the same in Outlook 2010, as far as I can tell. When you reply to an HTML e-mail message in Outlook, the quoted text has a blue line down the side, and is usually at the bottom of the message: Now in Outlook 2003, when replying to HTML-formatted messages in Outlook, you used to be able to reply inline quite easily, by getting to the point in the quoted message you wanted to reply to, and pressing the 'decrease indent' button: Since Outlook 2007 (and 2010), they replaced the e-mail editor with Microsoft Word. This means the blue line is implemented in a different way; it uses a blue left border. This makes it tougher to break the line up. After much ado, I found a couple of pages that said that you could remove all formatting by pressing ctrl-Q, which would remove the blue line next to the cursor and allow inline replies: OK, not too bad on the face of it. I can live with that. But here's the kick in the teeth; try sending that mail. I'll send it to myself. What do I receive? This: Outlook 2010 reinstated the blue line, where I had removed it, upon my sending the e-mail! For God's sake! The two pages I linked to above don't seem to address Outlook's reinstating of the blue line upon sending. So, does anyone know how you can actually reply inline in Outlook 2010 (or Outlook 2007) e-mail without the blue line being reinstated? Before anyone says, I do not want to convert the message to plaintext, and I do not want to just indent replies and have to manually build the blue line myself. I want something like the Outlook 2003 behaviour; I reply, Outlook creates the blue line, and I can break it up with inline replies, send it, and my inline formatting stays. My hopes aren't high - Microsoft seem to have gone to some trouble to actively prevent inline replies here, for some reason - but I'd appreciate anyone's insights. Cheers!

  Read the article

• All the Gear and No Idea: Suggestions for re-designing my home/office/entertainment network

  - by 5arx

  Help/ Advice/ Suggestions please: I have a load of kit that I love but which currently operate in disconnected, sometimes counter-productive way. Because I never really had a masterplan I just added these things one after another and connected them up in ad hoc ways. Since I bought my Macbook I've found I spend much less time on the MacPro that was until then my main machine. Perversely, as my job involves writing .Net software, I spend a lot of Mac time actually inside a Windows 7 VM. I stream media from the HP box to the PS3 and thus to the TV, but its not without its limitations/annoyances. We listen to each other's iTunes libraries but the music files are all over the place and it would be good to know they were all safely in one location (and fully backed up). I need to come up with a strategy that will allow me to use all the kit for work, play (recording live music, making tunes, iMovie work), pushing/streaming media to the TV and sharing files with my other half (she uses a Windows laptop and her iPod touch). Ideally I'd like to be able to work on any of the machines and have a shared homedrive that was visible to all machines so all my current files were synced up wherever i was. It would be great if I could access everything securely and quickly over the web. I'd also like to be able to set up a background backup process. The kit list thus far: Apple MacPro 8GB/3x250GB RAID0 + 1TB Apple MacBook Pro 13" 8GB/250GB - I spend a lot of my work time on a Windows 7 VM on this. Crappy Acer laptop (for children's use - iPlayer, watching movies/tv files) HP Proliant Server 4GB/80GB+160GB+300GB Sun Ultra 10 2 x 80GB (old, but in top-notch condition) PS3 160GB iPod Classic 2 x 8GB iPod Touch Observations: Part of the problem is our dual use of Windows and OS X - we can't go for a pure NT style roaming profile. Because the server is also used for hosting test/beta applications and a SQL Server db, it can't be dedicated to file serving. The two Macs really could do with sharing a roaming profile or similar. I'd love to be able to do something useful with the Ultra 10. My other half has been trying to throw it away for over five years now and regularly ask what function it serves in my study :-( I've got no shortage of 500GB external USB hard drives iMovie files are very large and ideally would be processed on a RAID system. Apple's TimeMachine isn't so great. If anyone could suggest all or part of a setup that would fulfil some of my requirements I'd be very grateful. I am willing to consider purchasing one or two more bits of kit (an Apple TV and a Squeezebox have been moted by friends) if they will help make efficiencies rather than add to the chaos and confusion. Thanks for looking.

  Read the article

• Cannot ping Localhost so I can't shutdown Tomcat

  - by gav

  Hi, I installed Tomcat 6 using the tar-ball via wget. Startup of the server is fine but on shutdown I get a timeout exception. root@88:/usr/local/tomcat/logs# /usr/local/tomcat/bin/shutdown.sh Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local/tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: /usr Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar 30-Mar-2010 17:33:41 org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) ... I read that this might be because I have a firewall blocking incoming connections on the shutdown port (8005). I have a default Ubuntu 9.04 installation running on a VPS with no rules in my iptables. How can I tell if that port is blocked? How can I check that the server is listening for connections on 8005? Bizarrely pinging localhost or the IP of my server fails from the server itself, whereas pinging the IP of my server from another machine succeeds. -------- EDIT -------- (In reply to Davey) Thanks for all the tips and suggestions! netstat -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:8005 0.0.0.0:* LISTEN 9611/java tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 28505/mysqld tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 9611/java tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN ... So we can see that tomcat is listening, I just don't seem to be able to reach it. root@88:/usr/local/tomcat# telnet localhost 8005 Trying 127.0.0.1... Trying to telnet to the port Hangs indefinitely. I have no rules in my iptables so I don't think it's a firewall thing. root@88:/usr/local/tomcat# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is the contents of /etc/hosts 127.0.0.1 localhost.localdomain localhost # Auto-generated hostname. Please do not remove this comment. 88.198.31.14 88.198.31.14 88 88 But I still can't ping localhost... do I need to check a loopback device is enabled properly or something? (I'm unsure how to do that if you do say yes :)). root@88:/usr/local/tomcat# ping localhost PING localhost (127.0.0.1) 56(84) bytes of data. --- localhost ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 5999ms Trying to find out what the loop back is configured as; root@88:~# ifconfig lo lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) SOLUTION THANKS TO DAVEY I needed to bring up the interface (Not sure why it wasn't running). ifconfig lo up did the trick. root@88:~# ifconfig lo up root@88:~# ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@88:~# ping localhost PING localhost.localdomain (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.025 ms Thanks again, Gav

  Read the article

• [Windows 7] Certain Programs cannot access internet

  - by Cindy

  Operating System: Windows 7 (x64) Problem: Certain Programs are unable to access the internet. They claim that there is no connection when you already are connected. Hello, before we start. Just letting you know I'm new here, and I'm very new to Windows 7. I installed it two days ago. I just installed Windows 7 on my laptop and I have a few problems. I play World of Warcraft, as well as a variety of games. And when I first attempt to log into the game, I get a windows error message, but it doesn't stop there. I thought World of Warcraft got corrupted during the upgrade. It seems that I am unable to access the internet from other online games as well. Most say in along the lines of "Cannot connect to patch server, try again later." I cannot use a downloader Also, I have internet explorer. The x32 version of the browser cannot connect to the internet, and when I try to enter "google.com", it says the same thing. I'm only accessing this site through Internet Explorer x64, which I would have been fine with is it's compatible with Adobe Flash. The only thing that seems to connect to the internet are Internet Explorer x64 and Windows Live Messenger. Here are the steps I have taken, but none worked. 1.) Disable Windows Firewall 2.) Have Windows Firewall Enabled, but allow the specific programs to access internet. And allowed all incoming access. 3.) Disabled UAC, Ran the programs as an admin, and set compatibility to Vista. 4.) Uninstalled an anti-virus program. (McAffee Security Suite 2010) 5.) Reinstalled the programs 6.) Reinstalled Windows 7 7.) Retaken the steps on the Administrator account. Please assist me in this problem. I need to get back into the game. Thanks so much in advance.

  Read the article

• Setting up a fileserver, some questions?

  - by Tanax

  Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

  Read the article

• Setting up a fileserver, some questions?

  - by Tanax

  Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

  Read the article

• Authenticating Apache HTTPd against multiple LDAP servers with expired accounts

  - by Brian Bassett

  We're using mod_authnz_ldap and mod_authn_alias in Apache 2.2.9 (as shipped in Debian 5.0, 2.2.9-10+lenny7) to authenticate against multiple Active Directory domains for hosting a Subversion repository. Our current configuration is: # Turn up logging LogLevel debug # Define authentication providers <AuthnProviderAlias ldap alpha> AuthLDAPBindDN "CN=Subversion,OU=Service Accounts,O=Alpha" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://dc01.alpha:3268/?sAMAccountName?sub? </AuthnProviderAlias> <AuthnProviderAlias ldap beta> AuthLDAPBindDN "CN=LDAPAuth,OU=Service Accounts,O=Beta" AuthLDAPBindPassword [[REDACTED]] AuthLDAPURL ldap://ldap.beta:3268/?sAMAccountName?sub? </AuthnProviderAlias> # Subversion Repository <Location /svn> DAV svn SVNPath /opt/svn/repo AuthName "Subversion" AuthType Basic AuthBasicProvider alpha beta AuthzLDAPAuthoritative off AuthzSVNAccessFile /opt/svn/authz require valid-user </Location> We're encountering issues with users that have accounts in both Alpha and Beta, especially when their accounts in Alpha are expired (but still present; company policy is that the accounts live on for at a minimum of 1 year). For example, when the user x (which has en expired account in Alpha, and a valid account in Beta), the Apache error log reports the following: [Tue May 11 13:42:07 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14817] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:08 2010] [warn] [client 10.1.1.104] [14817] auth_ldap authenticate: user x authentication failed; URI /svn/ [ldap_simple_bind_s() to check user credentials failed][Invalid credentials] [Tue May 11 13:42:08 2010] [error] [client 10.1.1.104] user x: authentication failure for "/svn/": Password Mismatch [Tue May 11 13:42:08 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ Attempting to authenticate as a non-existant user (nobodycool) results in the correct behavior of querying both LDAP servers: [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://dc01.alpha:3268/?sAMAccountName?sub? [Tue May 11 13:42:40 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:40 2010] [debug] mod_authnz_ldap.c(377): [client 10.1.1.104] [14815] auth_ldap authenticate: using URL ldap://ldap.beta:3268/?sAMAccountName?sub? [Tue May 11 13:42:44 2010] [warn] [client 10.1.1.104] [14815] auth_ldap authenticate: user nobodycool authentication failed; URI /svn/ [User not found][No such object] [Tue May 11 13:42:44 2010] [error] [client 10.1.1.104] user nobodycool not found: /svn/ [Tue May 11 13:42:44 2010] [debug] mod_deflate.c(615): [client 10.1.1.104] Zlib: Compressed 527 to 359 : URL /svn/ How do I configure Apache to correctly query Beta if it encounters an expired account in Alpha?

  Read the article

• How to improve this bash shell script for turning hardlinks into symlinks?

  - by MountainX

  This shell script is mostly the work of other people. It has gone through several iterations, and I have tweaked it slightly while also trying to fully understand how it works. I think I understand it now, but I don't have confidence to significantly alter it on my own and risk losing data when I run the altered version. So I would appreciate some expert guidance on how to improve this script. The changes I am seeking are: make it even more robust to any strange file names, if possible. It currently handles spaces in file names, but not newlines. I can live with that (because I try to find any file names with newlines and get rid of them). make it more intelligent about which file gets retained as the actual inode content and which file(s) become sym links. I would like to be able to choose to retain the file that is either a) the shortest path, b) the longest path or c) has the filename with the most alpha characters (which will probably be the most descriptive name). allow it to read the directories to process either from parameters passed in or from a file. optionally, write a long of all changes and/or all files not processed. Of all of these, #2 is the most important for me right now. I need to process some files with it and I need to improve the way it chooses which files to turn into symlinks. (I tried using things like the find option -depth without success.) Here's the current script: #!/bin/bash # clean up known problematic files first. ## find /home -type f -wholename '*Icon* ## *' -exec rm '{}' \; # Configure script environment # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ set -o nounset dir='/SOME/PATH/HERE/' # For each path which has multiple links # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # (except ones containing newline) last_inode= while IFS= read -r path_info do #echo "DEBUG: path_info: '$path_info'" inode=${path_info%%:*} path=${path_info#*:} if [[ $last_inode != $inode ]]; then last_inode=$inode path_to_keep=$path else printf "ln -s\t'$path_to_keep'\t'$path'\n" rm "$path" ln -s "$path_to_keep" "$path" fi done < <( find "$dir" -type f -links +1 ! -wholename '* *' -printf '%i:%p\n' | sort --field-separator=: ) # Warn about any excluded files # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buf=$( find "$dir" -type f -links +1 -path '* *' ) if [[ $buf != '' ]]; then echo 'Some files not processed because their paths contained newline(s):'$'\n'"$buf" fi exit 0

  Read the article

• PPTP connection fails with errors 800/806

  - by Mark S. Rasmussen

  I've got a client (Server 2008 R2) that won't connect to our production environment PPTP VPN server (Server 2003, running RRAS). The server is behind a firewall that has TCP1723 open as well as GRE. Other clients at our office are able to connect just fine. Our office is behind a Juniper SSG5-Serial firewall, but all outgoing traffic is allowed, and multiple other clients are able to connect to VPN servers without issues. I've also setup a completely different VPN server on another network outside of our office. The functioning clients connect just fine - the Server 2008 R2 machine doesn't. Thus it's definitely a problem with this machine in particular. I've rebooted it. I've disabled the firewall, no dice on either. I've run PPTPSRV and PPTPCLNT on the server/client and they're able to communicate perfectly - indicating there's no problem using neither TCP1723 nor GRE. The Server 2008 R2 machine is also running as a VPN server itself (incoming connection) and that's working perfectly. We have the issues no matter if there are active incoming connections or not. I'm not sure what my next debugging step would be; any suggestions? EDIT: The event log on the server has the following warning from RasMan: A connection between the VPN server and the VPN client xxx.xxx.xxx.xxx has been established, but the VPN connection cannot be completed. The most common cause for this is that a firewall or router between the VPN server and the VPN client is not configured to allow Generic Routing Encapsulation (GRE) packets (protocol 47). Verify that the firewalls and routers between your VPN server and the Internet allow GRE packets. Make sure the firewalls and routers on the user's network are also configured to allow GRE packets. If the problem persists, have the user contact the Internet service provider (ISP) to determine whether the ISP might be blocking GRE packets. Obviously this points to GRE being a potential problem. But seeing as I have other clients connectiong without problems, as well as PPTPSRV and PPTPCLNT being able to communicate, I'm suspecting this might be a red herring. EDIT: Here are the anonymized events logged by the client in chronological order: CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has started dialing a VPN connection using a per-user connection profile named ZZZ. The connection settings are: Dial-in User = XXX\YYY VpnStrategy = PPTP DataEncryption = Require PrerequisiteEntry = AutoLogon = No UseRasCredentials = Yes Authentication Type = CHAP/MS-CHAPv2 Ipv4DefaultGateway = No Ipv4AddressAssignment = By Server Ipv4DNSServerAssignment = By Server Ipv6DefaultGateway = Yes Ipv6AddressAssignment = By Server Ipv6DNSServerAssignment = By Server IpDnsFlags = Register primary domain suffix IpNBTEnabled = Yes UseFlags = Private Connection ConnectOnWinlogon = No. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY is trying to establish a link to the Remote Access Server for the connection named ZZZ using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY has successfully established a link to the Remote Access Server using the following device: Server address/Phone Number = XXX.YYY.ZZZ.KKK Device = WAN Miniport (PPTP) Port = VPN3-4 MediaType = VPN. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The link to the Remote Access Server has been established by user XXX\YYY. CoId={742CB15C-A7E0-47B7-8240-0EFA1139CBD9}: The user XXX\YYY dialed a connection named ZZZ which has failed. The error code returned on failure is 806. Running Wireshark on the client shows it trying and retrying to send a "71 Configuration Request" While the server shows the incoming client requests, but apparently without replying: Given that this is GRE traffic, I think rules out the GRE traffic being blocked. Question is, why doesn't the server reply? This is the Configuration Request the server receives from the non functioning client (meaning no response is sent to the client request): And this is the Configuration Request the server receives from the working client: To me they seem identical, except for differing keys and magic numbers, and the fact that one client receives a response while the other doesn't.

  Read the article

• Moving windows-2003 hdd into virtual machine - with HDD shrink

  - by jm666

  Before you vote to close as exact duplicate, please read the full question. I was already read: Can I make a virtual machine out of a Windows XP physical machine? Disk2vhd,convert my PC to Hyper-V Virtual Machine Creating a Windows Virtual PC image from a Physical machine physical machine to virtual machine and place into VirtualBox BSOD trying to migrate Windows XP from a physical to a virtual machine http://en.wikipedia.org/wiki/Physical-to-Virtual and all other similiar questions here and several external sites too Unfortunately, don't find answer for my problem. I have an physical machine with 500GB HDD, on what is installed old Windows-2003 server with one server application. The application is like the windows itself, too old, no support for it today, haven't installation media and so on.. ;( On the HDD it is used only approx. 100MB (maybe less when will delete all unnecessary files). Want convert the the machine into the VirtualBox, and the VirtualBox should run on the same machine. Is possible to do this with the next steps? I can attach another HDD (via USB or internally) Boot an live Linux from CD, mount HDDs Run "something" on the Linux (the above wikipedia article have many pointer for the SW) for the conversion and store the image on the USB HDD - unfortunately, many of tools uses some specialty what exists in Windows-XP and above. No informations about Windows-2003 server, so what is an working solution for Windows-2003? try boot the virtual image with VirtualBox when it will run ok, remove the old installation, install Linux on the old 500GB hdd, copy the image and run.. The above should works (i hope), but the problems: i currently have only 320GB external USB hdd. (ofc, i can remove it from a box and enter it as internal HDD too) so, for the conversion I looking for the on the fly HDD shrink, so while moving the physical 500GB HDD need shrink it into smaller HDD - as i told above, only 100MB is used Exists something for this? (free) - or the only way is buying and larger 1TB hdd and using it for the conversion? Another question are: is anybody have real experience with windows-2003 conversion into VirtualBox? Looking for an answer from someone who really doing it and can figure out real pitfalls. (googling can do myself). exists here better approach for the solution?

  Read the article

• Cliq Wireless questions

  - by Nathan Adams

  Heres the deal: I am by no means a Linux expert, even less when it comes to the Android OS but lets see if we can't solve this problem. The problem I am having is that on the Cliq we have a broadcom chip. In order to use the wireless card you must first insert the module into the kernel. Fine: # insmod /system/lib/dhd.ko insmod /system/lib/dhd.ko # lsmod lsmod dhd 164936 0 - Live 0xbf000000 # BUT netcfg (or ifconfig in busybox) does not recognize that there is a wireless adapter there: # netcfg netcfg lo UP 127.0.0.1 255.0.0.0 0x00000049 dummy0 DOWN 0.0.0.0 0.0.0.0 0x00000082 rmnet0 UP 14.67.164.2 255.255.255.252 0x00001043 rmnet1 DOWN 0.0.0.0 0.0.0.0 0x00001002 rmnet2 DOWN 0.0.0.0 0.0.0.0 0x00001002 usb0 DOWN 0.0.0.0 0.0.0.0 0x00001002 # busybox ifconfig busybox ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:282 errors:0 dropped:0 overruns:0 frame:0 TX packets:282 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:18754 (18.3 KiB) TX bytes:18754 (18.3 KiB) rmnet0 Link encap:Ethernet HWaddr EE:83:E8:B4:4A:ED inet addr:14.x.x.x Bcast:14.67.164.3 Mask:255.255.255.252 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7148 errors:0 dropped:0 overruns:0 frame:0 TX packets:7659 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2609236 (2.4 MiB) TX bytes:908575 (887.2 KiB) # For giggles if we attempt to launch wpa_supplicant anyways we get this: # wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf ioctl[SIOCSIWPMKSA]: No such device ioctl[SIOCSIWMODE]: No such device Could not configure driver to use managed mode ioctl[SIOCGIFFLAGS]: No such device Could not set interface 'eth0' UP ioctl[SIOCGIWRANGE]: No such device ioctl[SIOCGIFINDEX]: No such device CTRL-EVENT-STATE-CHANGE id=-1 state=0 ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWAUTH]: No such device WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. ioctl[SIOCSIWAUTH]: No such device WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: No such device WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: No such device ioctl[SIOCGIFFLAGS]: No such device # In dmesg we get: <4>[18300.494065] dhd_oob_enable_intr : enable <4>[18305.019976] dhd_net_start failed bus is not ready <4>[18305.020278] dhdsdio_probe: dhd_net_start failed! Do I need to specify the firmware with insmod? Why are we trying to control the interface manually instead of through the Android API? The Android API doesn't support ad-hoc connections as far as I can tell. The card, I am sure, most certainly can.

  Read the article

• Windows 7 playback of dvr-Microsoft files stutters

  - by Jim Lynn

  I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-Microsoft format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-Microsoft (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-Microsoft file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-Microsoft files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-Microsoft looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for Windows Media Player but GraphStudio won't show it. It looks like Windows Media Player and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

  Read the article

< Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >