Search Results

Search found 20049 results on 802 pages for 'virtual drive'.

Page 538/802 | < Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >

• Static route in conflict with a default route

  - by Ossan Sokiv

  Hi guys, I have a default route configured. 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.1 I'd like to add a static route to pass traffic destined for 192.168.1.51 via a load balancer's redundant virtual interface at 192.168.1.2. ip route add 192.168.1.51 mask 255.255.255.255 via 192.168.1.2 When I try to add the static route I get this error. Error: either "to" is duplicate or "default" is garbage." It doesn't want to add the static route because it's in conflict with the default route. Is there a way around this? Regards Ossan

  Read the article

• How do I PXE boot multiple Windows 7 desktops off the same image?

  - by Matt

  Some years ago in my uni days I recall that the uni labs booted windows nt over the network. There was a shared drive for your own stuff, and other than that any changes you did to the running OS were reset when you restarted the machine. Now I'd like to be able to do the same thing with Windows 7. I have found some howto's for this using iSCSI, but I don't want an iSCSI disk for every single PC, I'm wanting one image for multiple PC's. I've also found PXE Boot setups for installing windows locally, but that's not what I want either. How would I go about setting up what I had at uni but with Windows 7 as a OS to netboot? i.e. How do I netboot windows 7 images? I do not want to netboot a windows 7 installer to a pc to install windows locally, I want to run a windows 7 image from memory/network.

  Read the article

• Core Audio sound driver has an error

  - by Raj More

  I have been using Virtual DJ on my machine. The setup is where I want audio to play over the headphones and use a USB sound card to play audio into my headphones so I can listen to music before I play it for everybody. However, the last time I tried, I got an error message saying "Error in the sound driver of Core Audio. Your sound card is probably not connected, or the settings are incorrect". If I use the headphone by themselves, the USB sound card by itself, or my speakers by themselves, they all work individually. How do I go about figuring out what's wrong here?

  Read the article

• Making Windows Explorer to Search WebDAV Server using DASL

  - by user124209

  I am trying to setup search in a WebDAV repository in IIS 6 on Windows Server 2003 R2. I successfully configured WebDAV in IIS and enabled my repository indexing as described in Searching WebDAV Directories (IIS 6.0) I have verified that search is now supported by my WebDAV server, in OPTIONS request I can see DASL support: DASL: <DAV:sql> DAV: 1, 2 Public: OPTIONS, TRACE, GET, HEAD, DELETE, PUT, POST, COPY, MOVE, MKCOL, PROPFIND, PROPPATCH, LOCK, UNLOCK, SEARCH Allow: OPTIONS, TRACE, GET, HEAD, DELETE, COPY, MOVE, PROPFIND, PROPPATCH, SEARCH, MKCOL, LOCK, UNLOCK I connected to my WebDAV server from a client computer, which is Windows 8.1 and WebDAV is working well. I mounted a drive and connected using \\server@port\DawWWWRoot as described here. However my client computer, which is Windows 7, does not generate any search request. I have captured requests using Fiddler tool and found that Windows Explorer is not sending any search requests, instead it is sending a PROPFIND and downloading files. How do I make Windows Explorer to send SEARCH request to my WebDAV server?

  Read the article

• Add linux user with restricted access

  - by Dominik Str

  I need to create a user on linux with access rights only to one folder. Background: I have installed git on my virtual server (Debian). I also created a user for the repository. There is a lot of private data on the server. But all folders have read-access for others, because it's needed for the applications which run on the server. So the git-user can see all the data. I would like to restrict the git user only to the folder where the repository is installed. I also tried ACL, but it didn't work. Is there a better way to do this? Thanks in advance!

  Read the article

• mkisofs - Floppy Image to Disk Image

  - by CommunistPancake

  I'm trying to compile MikeOS on windows. I've successfully (I think) created a floppy (.flp) image of the operating system. I want to convert it to a disk image (.iso) so I can run it in virtual box. I've tried mkisofs -quiet -V 'MIKEOS' -input-charset iso8859-1 -o disk_images/mikeos.iso -b mikeos.flp disk_images/ Which is the command in the Linux build script. It does create an ISO image, but when I try to run in in VirtualBox, I get a black screen. What am I doing wrong? Here's my build script.

  Read the article

• Moving files fails due to privileges but they seem to be OK

  - by joaoc

  I am trying to copy old files from an OS X 10.5.8 to a new external HD. When trying to copy a folder I get the message: The operation cannot be completed because you do not have sufficient privileges for some of the items. I've checked the privileges and they seem ok (read & write for me). What is curious is that the folder is created empty on the target drive and I can then copy the contents from inside the original folder to inside the new folder without changing anything else. This happens with several folders but not all and is making backup a pain. I have to figure out which folder broke the copy, copy its contents to the external disk and then select what hasn't been copied to copy (and eventually stop at some point and repeating the experience)

  Read the article

• Address Label Printing without Windows Address Book

  - by Jim Fell

  In the past I've maintained my address book using the built-in Address Book utility that came with Windows. Once each year, I would import my Address Book (.WAB) file into Outlook 2003/XP. (I don't use Outlook for email.) Then I would use the Mail Merge feature in Word 2003/XP to make and print address labels on standard Avery label sheets to simplify address of my Christmas cards. Since I'm now using Windows 7, and the familiar Address Book utility is no longer available, how can I print my address labels? I have both Windows Address Book (.WAB) and Comma-Separated Values (.CSV) files that contain my address book data. So, I guess I need to know two things: Which program or utility (preferably free) can I use to print my address labels. How do I import my address data into that program? If it helps, I am already a user of Gmail and Google Drive. Thanks.

  Read the article

• Connectivity good between VMs, but no connectivity between host and VM

  - by Greg Sansom

  I have a strange situation where connectivity (ie ping, access shared folders and services) is fine between virtual machines, but not between the host and the virtuals. I've been using Hyper-V almost every day for years and have never had a problem like this. Note the following: The host machine and all virtuals are running Windows Server 2008 r1. All machines can connect to the web, and the gateway router. Subnet mask and gateway reported in ipconfig are identical for all machines. I can access virtuals via the Hyper-V snap-in only. Doea anyone have suggestions about what might be wrong, or what diagnostic steps I can take?

  Read the article

• Ethernet interface number changed, and old one does not exist, but does not leave IP address

  - by Sagar

  I have a virtual machine with Mandriva 2007.0 (yes, old - unfortunately we do not have a choice here). Anyway, the problem: Before reboot: active network interface = eth0. No other interfaces present, and network manager confirms this. Static IP address set to 172.31.2.22. No issues, everything working properly, routing et al. -------Reboot--------- After reboot: active network interface = eth1, with a DHCP address. Network manager shows eth0 as disconnected, and not connectable. When I try to set eth1 up with the static IP address (same one), it says "In Use". I then tried ifconfig eth0 172.31.2.29 just to free it up from the eth0 interface so I could use it with eth1 (since this is connected). Result: ifconfig eth0 172.31.2.29 SIOCSIFADDR: No such device eth0: unknown interface: No such device Nothing else changed. Any ideas what could be happening, or at least how I can get my IP address back?

  Read the article

• How to monitor CPU usage and performance on a Hyper-V server with several VM's

  - by Bjørn

  Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.) So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

  Read the article

• ESXi 4.1 CentOS 6.X eth0 unnavailable

  - by L.K.

  I don't usually ask for help so directly, usually google have all i need but this time i'm seriously lost. Hope you can help me .s The thing is, i have a server with Vmware ESXi 4.1 and 5 already running and configured virtual servers, but whenever i try to make a new one on CentOS 6.X it leaves me without eth0 to be activated in any way. When installing CentOS, in the screen of localhost.localdomain i try by the button in the left down corner of the screen to make eth0 connect automatically but it tells me a NetworkManager Error: cannot start eth0. So...in command line once the CentOS is already installed, i have configured ifcfg-eth0 and manually tried to take up the eth0 but when i restart network service "Bringing up eth0: Failed" and sometimes even "shutting down eth0: Failed" Thanks in advance

  Read the article

• KVM-Guests can't get past bridge - no internet connection

  - by tmn29a

  I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

  Read the article

• Citrix XenServer iSCSI shared disk?

  - by chsguy

  I am running Citrix XenServer Essentials 5.5, with VMs stored on an EqualLogic iSCSI shelf, using XenServer's StorageLink. I would like to create a "virtual disk" that can be attached to multiple VMs. This would be used for a cluster file system like OCFS2 or GFS. This doesn't seem possible using the XenCenter GUI and I can't find anything online about how to do it. I realize I could simply expose the iSCSI network to the VM and have the VM initiate its own iSCSI, but that creates a lot of security challenges. This was pretty easy to do on Oracle VM Server, which is Xen based, so I know it's not a limitation of Xen itself. Maybe there is an "xe-" command for this? Thanks for any suggestions you can provide.

  Read the article

• Can you disable UNC paths in Windows?

  - by Evan

  We are trying to lock down a Terminal Server, and want to remove a commercial package's ability to accept UNC file paths, ie. paths in the app can then only be entered using the windows drive letters. Is there any way to do this in Windows? Can we disallow UNC paths for just the app? Can we disallow UNC paths for the entire Terminal Server session? The intention is to allow the application to only write to certain directories (as mapped in the Terminal Server session). The aim is to prevent the output of files to directories that the users have access to, but are not mapped in the Terminal Server session.

  Read the article

• How to recover bitlocker encrypted partition that is now 'unallocated'/'free space'?

  - by Atishay Jain

  My hard drive had 5 partitions(including 1(some 4-5GB) bit locker encrypted one). When I used disk mgmt I could view 2 partitions(24.4GB and 8.94GB) in green colour labeled Empty space. So, I wanted to merge them and I used minitool partition wizard for the purpose. I don't know, what that software did, but all I was left with 2 partitions and lots of green free space. I recovered 2 partitions using EaseUS partition master, but the bitlocker encrypted partition cannot be searched by it(and also minitool partition recovery). Now, the disk mgmt shows 2 free space partitions of 28.36GB and 8.94GB respectively. Here is a screenshot http://s14.postimage.org/4tvij041t/Screen_Shot003.jpg Please, tell me a way to recover the bitlocker encrypted partition that is showing as a free space in disk management. P.S. - It contains very important data.

  Read the article

• Oracle on NFS vmdk beats native NFS!?

  - by fletch00

  Hi, my colleagues are pursuing this with Netapp and Oracle - but I thought I'd post here on the off chance someone else has seen this We have a RedHat 5 VM (fully up2date) running Oracle 11i with data disks mounted via the VM's linux kernel NFS using Oracle's recommended mount options and the performance is very inconsistent (Querys that should take < 2 seconds sometimes take 60 seconds) Funny thing is we can run the same queries perfectly consistently < 2 seconds on a VMDK residing on SAME NetApp NFS datastore! Makes me wish Oracle and NetApp collaborated as closely as VMware and NetApp did on the Virtual Storage Console we used to perfectly set the NFS options and keep them in compliance... We have tried a few Linux NFS options others have posted and not seen improvement so far. We are now creating VMDK's for the VM to replace the Linux NFS mounted and workaround the issue as our developers need consistent performance ASAP.

  Read the article

• Recovering Pictures & Movies from Formatted Memory Card

  - by Donotalo

  I thought I've copied all of the pictures and videos that I've taken using my digital camera Canon Digital IXUS 860 IS to my computer. Then I format the memory card. Then I found I didn't take all of the files! I don't have any other means of connecting the memory card to computer except via the camera. But the camera doesn't show it as a removable device directly in my computer so programs like Glary Utilities and PC Inspector didn't find the drive. I didn't take any picture after I formatted it. Is there any free software that can help me to get the pictures and videos? My memory card is an 4 GB SDHC card. Thanks.

  Read the article

• TRIM in centos 5.X?

  - by Frank Farmer

  I've got a bunch of centos 5 boxes with Intel X-25 drives (x25-m in dev, x25-e in prod, I think). We're seeing severely degraded disk performance on one of our dev boxes (which easily does 5+ gb of writes every day, meaning we write the full drive's worth of data several times a month). The box in question: Intel x25-m Ext3 (which doesn't support TRIM) centos 5 vmware ESXi Wikipedia mentions that newer versions of hdparm (which centos5 doesn't include) can bulk-TRIM free blocks. This utility also sounds potentially useful: http://blog.patshead.com/2009/12/a-quick-and-dirty-wipersh-fix-for-intel-x25-m.html Disk write performance has dropped to <1 MB/sec while copying a 300 meg directory on this system, as of a month or so ago -- it used to be able to perform the same copy operation at least 5 times faster. What can I do to recover performance on this system?

  Read the article

• Dell Latitude e6520 gaming capabilities?

  - by user1072185

  I am purchasing a very reduced Dell Latitude e6520 from a friend and was wondering what kinds of games I could play on it and what resolutions. I'm not buying it for gaming purposes, but I am curious. The specs are as follows: Intel® Core™ i7-2720QM (2.20GHz, 6M cache) with Turbo BoostTechnology 2.0 nVidia® NVS™ 4200M 512MB DDR3 Discrete Graphics for Quad Core upon further research, the CPU requires this graphic card. 4.0GB, DDR3-1333MHz SDRAM 500GB 7200rpm Hard Drive I may upgrade to 8GB memory, depending if I am bogged down, what do you guys think?

  Read the article

• Debian Squeeze Upgrade Breaks Apache SSL

  - by PP

  I upgraded my Debian from Lenny to Squeeze. BIG MISTAKE. Now I get: [Tue Feb 08 16:34:57 2011] [error] Server should be SSL-aware but has no certificate configured [Hint: SSLCertificateFile] ((null):0) littered throughout /var/log/apache2/error.log. How to fix? Looking through a mess of forums it is easy to see that Apache changed the way it reads configurations around 2.2.13. Great. But not great for me or the millions of other web administrators who now have web servers that simply won't start, and an error message that says NOTHING about the problem or how to fix. Anybody else actually solved this issue? I had perfectly working virtual servers with SSL before (for years actually).

  Read the article

• MediaTemple tcpsndbuf QoS Alerts

  - by theturninggate

  I'm hosting with MediaTemple on a (dv) Dedicated-Virtual 3.5 server. My site consists of a Wordpress blog, some custom PHP pages (nothing too intense), and I server 500-700 unique visitors per day. Despite my pretty modest numbers, I suffer from regular Apache crashes on account of QoS Alerts, mostly flagged as "tcpsndbuf". MediaTemple support -- usually tops -- has been pretty useless on this matter. I'm looking for answers as to how/why this is happening, advice on how to stop it. My website is a good portion of my livelihood, and downtime equates to lost income. Any and all help much appreciated. -Matt

  Read the article

• Nexenta/OpenSolaris filer kernel panic/crash

  - by ewwhite

  I've an x4540 Sun storage server running NexentaStor Enterprise. It's serving NFS over 10GbE CX4 for several VMWare vSphere hosts. There are 30 virtual machines running. For the past few weeks, I've had random crashes spaced 10-14 days apart. This system used to open OpenSolaris and was stable in that arrangement. The crashes trigger the automated system recovery feature on the hardware, forcing a hard system reset. Here's the output from mdb debugger: panic[cpu5]/thread=ffffff003fefbc60: Deadlock: cycle in blocking chain ffffff003fefb570 genunix:turnstile_block+795 () ffffff003fefb5d0 unix:mutex_vector_enter+261 () ffffff003fefb630 zfs:dbuf_find+5d () ffffff003fefb6c0 zfs:dbuf_hold_impl+59 () ffffff003fefb700 zfs:dbuf_hold+2e () ffffff003fefb780 zfs:dmu_buf_hold+8e () ffffff003fefb820 zfs:zap_lockdir+6d () ffffff003fefb8b0 zfs:zap_update+5b () ffffff003fefb930 zfs:zap_increment+9b () ffffff003fefb9b0 zfs:zap_increment_int+68 () ffffff003fefba10 zfs:do_userquota_update+8a () ffffff003fefba70 zfs:dmu_objset_do_userquota_updates+de () ffffff003fefbaf0 zfs:dsl_pool_sync+112 () ffffff003fefbba0 zfs:spa_sync+37b () ffffff003fefbc40 zfs:txg_sync_thread+247 () ffffff003fefbc50 unix:thread_start+8 () Any ideas what this means?

  Read the article

• Pfsense: Inbound Load Balancing https with sticky connection

  - by Zeux

  first of all I'm very sorry for my English... This is my scenario: Internet Firewall+LB: pfsense_1(Active) + pfsense_2(Passive) in CARP Pool servers: 3 x nginx(PHP5+HTTP+HTTPS) Pfsense 1 and 2 CARP configured with Virtual IP (pubblic). Nginx servers's ips are all private. I want to load balance inbound HTTP and HTTPS connections between the 3 nginx web servers. An importat thing is that the HTTPS connections must be "sticky connections": in HTTPS connections, after login by username and password, I setup a php session and therefore when a client starts a HTTPS connection it will be always redirected to the same nginx server, until it disconnects itself, it closes the page/browser or after a timeout (30minutes?) without activity. Is this possible whit the last release(2.0.1) of pfsense? thank you very much...

  Read the article

• On Server Disk Storage VS SAN Storage

  - by Justin

  Hello, I am looking at buying three servers, and trying to figure out which storage solution makes the most sense in terms of performance and cost. Total budget is around: $10,000. OPTION 1: Dell servers with RAID 10 (4 Drives) each 7200RPM SAS 500GB, for a total capacity of 1TB. Each server is approx: $3000. Total storage then across all three servers is 3TB. OPTION 2: Same Dell servers with a cheap single drive no RAID for $2000 and go with a centralized SAN solution. The biggest problem is that I haven't been able to even find a SAN solution that is a reasonable price. Dell entry level storage servers are like $15,000. I am thinking just iSCSI, not fiber (too expensive). What do you guys recommend?

  Read the article

< Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >