Search Results

Search found 19966 results on 799 pages for 'wild thing'.

Page 538/799 | < Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >

• CentOS 5.5 ext4 conversion problem - ext4 partition is recognized as ext3

  - by FractalizeR

  Hello. I had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting yum install e4fsprogs tune2fs -O extents,uninit_bg,dir_index /dev/md2 nano /etc/fstab # I indicated here that my /dev/md2 is of ext4 uname -a mkinitrd -f /boot/initrd-2.6.18-194.3.1.el5.img 2.6.18-194.3.1.el5 Rebooted. I expected fsck to start automatically as said on some site. But it did not. Threw some error (don't remember exactly which). Ok, I booted linux rescue and executed fsck: fsck -t ext4 -fy /dev/md2 Partition went fine. But still when I boot main system, it says in log: "ext3-fs:" then something about not being able to mount ext3 partition due to unknown extended attributed (200). I booted linux rescue again. It loads fine and correctly determines all my machine partitions both ext3 (boot) and ext4 (/) under /mnt/sysimage just fine. I retried mkinitrd thing again watching it's output and ensured ext4 module is included into the system. I also edited menu.lst grub file to include rootfstype=ext4 kernel parameter. Bad luck. I still have message from ext3-fs about not being able to mount filesystem because of attributes and kernel panic immediately after. I checked /etc/fstab - it's fine and saying that root is of ext4. What did I do wrong? This machine is empty so I can just reformat it with 5.5 and recreate partitions to be originally ext4. But... I just want to know what did I do wrong.

  Read the article

• Citrix Performance monitoring

  - by Dr I

  Hi people, I has a strange thing which appears on my Citrix Farm today. My users are equiped with a Thin client Axel Model 80F, and today, one of them sustained a problem on it. He opened a citrix's Publish Desktop session (Host by a farm of Windows 2003 R2 SP2 Servers), he loaded Lotus Notes and a mail who contained an PDF attached file. Once he has opened his PDF File, his session has freezed. We've just reboot the Thin Client, and log in again on the session (which hasn't been closed during the process). Once we have log in again, we try to read the pdf and once again afer half a page the session freeze again (I can see the mouse moving on the screen but can make anything). Then I close the session, reboot correctly the thin client, and "Tada" with the same manipulationsn averything is correct and we don't facing any freeze. Well Now my question is: Is that bug came from the thin client or the server about you? I've checked on my farm and I don't have any alert from the Citrix's Monitoring console logs. According to me it's due to the Thin Client BUT I ddon't have enought monitoring tools to be sure of that. So do you have some quite godd monitoring tools or method? My config: Windows 2003 R2 SP2 Citrix Xenapp 5.0

  Read the article

• File is not compatible with the version of Windows you're running

  - by vaccano

  I have a really old installer (legacy app) that we are trying to get running on a Windows 7 64 bit os. Previously it has only been installed on Windows XP 32 bit. I get the following error when I try to run it: The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher. Contacting the software publisher is not an option (software is super old). Is there a way to get this to work? Some sort of compatibility mode? The only thing I have heard of that will work is a Virtual XP on the Win 7 box. The problem is that this software is a part of a whole software set. I would have to put all of the pieces on the Virtual XP or none at all. Before I go down the road of putting it all on the virtual xp I would like to know that there is no way to get it all on the Win 7 os.

  Read the article

• Uninstall php5 installed from source.

  - by diegomichel

  I have tried to install php5 from source , and it worked... Then for some reason need to install the official packets, so i tried a make uninstall and for my surprise there is such make uninstall... so i tried delete all the installed files by hand. Then installed the official debian packages and it worked fine... till i need install sqlite module, which give me the following error: php --version PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/pdo_sqlite.so' - /usr/lib/php5/20090626/pdo_sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/sqlite.so' - /usr/lib/php5/20090626/sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP 5.3.1-5 with Suhosin-Patch (cli) (built: Feb 22 2010 22:46:05) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies So i remember that manual install i did, and i think there is some old lib installed causing that problem, the bad thing is that there is not such make uninstall on the source code of php5... php-5.2.13 > make uninstall make: *** No rule to make target `uninstall'. Stop. I have tried reinstall and purge all php related packages via aptitude with not success. OS: Debian Squeeze. uname -a Linux desktop 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux Any idea how to fix that?

  Read the article

• "Modern" Ethernet over coax

  - by Electrons_Ahoy

  So, I've just bought a house. It's reasonably new - built in the early '00s. One of the features that got built in was a cable TV drop in every room. The cabling is gorgeous - there's even a wiring cabinet of sorts in a closet where the cables all tie together to the splitter to the outside line. Of course, my problem is that I only own the one TV. I do, however, own a few computers. What I would love to be able to do is drop a switch in the wiring closet and run 100/1000BASE-T ethernet over the coax in the walls I wouldn't otherwise be using. My fantasy would be if you could get some kind of adapter-plug-thing that would take a coax plug on one side and a cat5/RJ45 plug on the other. Had anyone else done this? Any suggestions? (There are a few other options that suggest themselves - first, I could just use the existing cabling channels and re-run cat5 or 6 through the walls. While tempting, that sounds like more work than I really want to put in, so I'm calling that Plan B. Also, I could just scare up a mess of old 10BASE2 cards and run the house on thinnet, all mid-90s style. While I think I'd get major style points for that, I don't think I can get a 10BASE2 adapter for the new laptop. Also, I have all these super-snazzy gigabit adaptors I'd like to be using. And so forth.)

  Read the article

• Apache error: could not make child process 25105 exit, attempting to continue anyway

  - by Temnovit

  Hello! I have a web server based on Ubuntu Server 9.10 with this software: apache 2 PHP 5.3 MySQL 5 Python 2.5 Few of my websites are PHP based, few use python/django through mod_wsgi. For month or so, every day my apache server stops responding until I manually restart it. Error logs show: [Fri Mar 05 17:06:47 2010] [error] could not make child process 25059 exit, attempting to continue anyway [Fri Mar 05 17:06:47 2010] [error] could not make child process 25061 exit, attempting to continue anyway [Fri Mar 05 17:06:47 2010] [error] could not make child process 24930 exit, attempting to continue anyway [Fri Mar 05 17:06:47 2010] [error] could not make child process 25084 exit, attempting to continue anyway [Fri Mar 05 17:06:47 2010] [error] could not make child process 25105 exit, attempting to continue anyway and so on. I tried to google this problem but it seems, that I can't find a solution there. How can I determine the cause of this error and how do I fix it? Thank you for your help. UPDATE Updating mod-wsgi to version 3.1 didn't solve the problem Updating PHP to 5.3 also didn't solve it Here is a list of all installed modules: core mod_log_config mod_logio prefork http_core mod_so mod_alias mod_auth_basic mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_deflate mod_dir mod_env mod_mime mod_negotiation mod_php5 mod_rewrite mod_setenvif mod_status mod_wsgi Here's how my virtual host with wsgi looks: <VirtualHost *:80> ServerName example.net DocumentRoot /var/www/example.net #wcgi script that serves all the thing WSGIScriptAlias / /var/www/example.net/index.wsgi WSGIDaemonProcess example user=wsgideamonuser group=root processes=1 threads=10 WSGIProcessGroup example Alias /static /var/www/example.net/static #serving admin files Alias /media/ /usr/local/lib/python2.6/dist-packages/django/contrib/admin/media/ <Location "/static"> SetHandler None </Location> <Location "/media"> SetHandler None </Location> ErrorLog /var/www/example.net/error.log </VirtualHost> Error log now contains two types of errors fallowed one by another: [error] child process 9486 still did not exit, sending a SIGKILL [error] could not make child process 9106 exit, attempting to continue anyway

  Read the article

• How does SELinux affect the /home directory?

  - by Matt Solnit

  Hi everyone. I'm migrating a CentOS 5.3 system from MySQL to PostgreSQL. The way our machine is set up is that the biggest disk partition is mounted to /home. This is out of my control and is managed by the hosting provider. Anyway, we obviously want the database files to be on /home for this reason. With MySQL, we did the following: Edited my.cnf and changed the datadir setting to /home/mysql Added a new "File type" policy record (I hope I'm using the right terminology) to set /home/mysql(/.*)? to mysqld_db_t Ran restorecon -R /home/mysql to assign the labels and everything was good. With PostgreSQL, however, I did the following: Edited /etc/init.d/postgresql and changed the PGDATA and PGLOG variables to /home/pgsql/data and /home/pgsql/pgstartup.log, respectively Added a new policy record to set /home/pgsql/pgstartup.log to postgresql_log_t Added a new policy record to set /home/pgsql/data(/.*)? to postgresql_db_t Ran restorecon -R /home/pgsql to assign the labels At this point, I still cannot start PostgreSQL. pgstartup.log says: # cat pgstartup.log postmaster cannot access the server configuration file "/home/pgsql/data/postgresql.conf": Permission denied The weird thing is that I don't see any messages related to this in /var/log/messages or /var/log/secure, but if I turn off SElinux, then everything works. I made sure all the permissions are correct (600 for files and 700 for directories), as well as the ownership (postgres:postgres). Can anyone tell me what I am doing wrong? I'm using the Yum repository from commandprompt.com, version 8.3.7. EDIT: The reason my question specifically mentions the /home directory is that if I go through all these steps for any other directory, e.g. /var/lib/pgsql2 or /usr/local/pgsql, then it works as expected.

  Read the article

• OpenAM throwing 302 0 behind haproxy, nginx

  - by Travis

  I'm having some issues with my deployment and was wondering if you can help. My set up is as follows: 2 OpenAM servers are set up behind a load balancer (HAproxy). The load balancer is set up behind two reverse proxies (nginx). The two reverse proxies are ser up behind another load balancer (haproxy). So a request will go through Haproxy nginx Haproxy openam I can access the OpenAM web console through the reverse proxies without a problem. Everything works fine at this level. However when I access openam through the load balancer in front of the reverse proxies Openam throws a 302 error. The funny thing is however I can access the host/openam/UI/Login and login successfully. I even get the cookie and have access to my apps that are set up. However immediately after the login OpenAM throws a 302 redirect. I'm puzzled and cannot figure out what is going wrong. Does anyone have any idea? My config files are below: nginx config : server { listen 443; server_name oamlb1; location / { proxy_pass http://oamlb1.mydomain.com:8080; proxy_set_header X-Real-IP $remote_addr; } location /openam { proxy_pass http://oamlb1.mydomain.com:8080; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host oamlb1.mydomain.com:8080; } } haproxy config : (This file is for the servers. The file for the reverse proxies is idenical except it points to the reverse proxies) listen http_proxy :8090 mode http balance roundrobin option httpclose option forwardfor server webA oamserver1.mydomain.com:18080 option forwardfor Thanks

  Read the article

• Make Thundirbird use and sync with Gmail Spam facility

  - by Senthil

  I am using Thundirbird 3.1.7. I am using Gmail with it. When I mark a message as spam in Thunderbird, I want it to go to Gmail's spam folder. But it is not happening. The mail is only marked as spam and stays in Gmail's inbox. How can I setup Thunderbird so that when I mark a message as spam in thundirbird, it goes to spam folder in both Thunderbird and Gmail? FYI: I have disabled Thunderbird's own adaptive spam controls so that it doesn't interfere. I am perfectly fine with Gmail's spam facility and don't want Thunderbird to add another layer of spam filtering. Still Thunderbird doesn't send emails to Gmail's spam. Update I figured that dragging and dropping the email to the spam folder in Thunderbird does the job. But is it the same as marking the email as spam in Gmail's interface? i.e. Gmail will do stuff when you mark an email as spam so that it can filter out similar messages in the future. Does it happen when I do this drag and drop thing too? Are they the same?

  Read the article

• Intel Core i7 QuadCore on HP Pavilion dv7 Overheating Issues

  - by kellax

  I bought a brand new HP notebook: HP Pavilion dv7-6b21em BeatsAudio edition. The notebook is about 2 months old and has pretty nasty overheating problem. I mainly use it for development however i do play some games. The disturbing thing is that the computer is loud on pretty simple tasks. Here are the specs: CPU: Intel Core i7-2670QM QuadCore ( 8 threads ) @ 2.20 GHz RAM: ( 8GB ) 2x 4GB @ 1066 HDD: 1TB 7200 GPU: ATI Radeon HD 6770M 1GB Dedicated DDR OS: Windows 7 64bit Enterprise I have an external monitor runing on VGA port an 22' Samsung SyncMaster S24B300 CPU Heat Statistics Platform: rPGA 988B (Socket G2) Frequency: cca. 3000 Mhz VID: 1.1809 - 1.2059 v Revision: D2 CPUID: 0x206A7 TDP: 45.0 Wats, Lithographu: 32 nm Heat: Tj. Max: 100*C, Power 4.5 - 5.9 Wats Core #0: 63*C Load on all is about 0 to 2% Core #1: 65*C Core #2: 66*C Core #3: 67*C I opened the notebook the fan is working fine there is no dust but still right now the fan is pretty loud even tho all i have open is FireFox. When i run a game the heat jumps to whopping 90-97*C. It has not shut down due to overheating yet but the loud fan is pretty annoying considering I'm not really doing anything stressfull. Is there anything i can do to fix this is it maybe a BIOS issue ? I have all drivers updated tho to the latest. I have very few background processes running consuming bare 2GB of RAM and about 2% of CPU. I had it serviced they said there is nothing wrong with it. But i feel that a Notebook that costs 1.2k Euros cant be like this.

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by BlueBill

  Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

  Read the article

• Using the RST3 plugin in the Leo Outliner

  - by T-Boy

  I'm currently trying out the Leo Outliner, and I've heard quite a bit about the RST3 plugin that it has. I'm not planning to use Leo to program just yet -- at this point I'm wondering if it might be useful for generating HTML and PDF documents, as I'm quite currently enamored with RST and how it works. I'm using my Ubuntu Netbook Remix netbook (running 9.10, I believe). I think I've got it down pat, more or less -- I've installed docutils using the Synaptics Package Manager, and I think I've gotten SilverCity installed, as per the requirements -- I've downloaded the archive, and then run "sudo python setup.py install" with no errors. The thing is, I'm not exactly sure how to invoke the rst3 plugin itself. It doesn't appear in the Plugins menu for Leo right now, and the documentation I've managed to source doesn't seem to clearly explain how to use the plugin. Has anyone had any experience in using the rst3 plugin in Leo? It's a little confusing right now, and searches on Google doesn't seem to be helping much any more. I'm using the latest 4.7.1 final version of Leo from the Synaptics Package Manager (was informed that this would have offered the best integration with UNR, so I figured, what the heck). Have I missed out on any steps here, and are there any useful tutorials on how to use the rst3 plugin?

  Read the article

• What device can create wireless network while connecting to an ethernet router

  - by Nicolo

  Hi, I have access to an ethernet port of a wireless router. I simply connect my laptop to it via an ethernet cable. There are a total of four such ports on the wireless router. Now I want to connect a device (a wireless access point? wireless bridge? wireless switch?) via an ethernet cable to one of the other ethernet ports of the router. I want this device to act as a kind of wireless switch - it should "split" the ethernet connection coming from the router to two or more computers that connect to this device via a wireless. Basically, I have a wireless router with its wireless function switched off. I don't know the password for that router so can't activate the wireless function. Don't know the password of the ISP either. The only thing I can do is to connect via ethernet cable to the wireless router and this does not require a password. Now I want to use that connection and build a wireless upon it. What kind of device do I need? I am not really very well informed about network management and find the descriptions "wireless access point", "wireless bridge", "wireless switch" confusing. I know what an ethernet switch is - what I need is a device which would do the same but by allowing the clients to connect to it via a wireless. What kind of device would do that? Any recommendations about specific products?

  Read the article

• What tells initramfs or the Ubuntu Server boot process how to assemble RAID arrays?

  - by Brad

  The simple question: how does initramfs know how to assemble mdadm RAID arrays at startup? My problem: I boot my server and get: Gave up waiting for root device. ALERT! /dev/disk/by-uuid/[UUID] does not exist. Dropping to a shell! This happens because /dev/md0 (which is /boot, RAID 1) and /dev/md1 (which is /, RAID 5) are not being assembled correctly. What I get is /dev/md0 isn't assembled at all. /dev/md1 is assembled, but instead of using /dev/sda2, /dev/sdb2, /dev/sdc2, and /dev/sdd2, it uses /dev/sda, /dev/sdb, /dev/sdc, /dev/sdd. To fix this and boot my server I do: $(initramfs) mdadm --stop /dev/md1 $(initramfs) mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 $(initramfs) mdadm --assemble /dev/md1 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2 $(initramfs) exit And it boots properly and everything works. Now I just need the RAID arrays to assemble properly at boot so I don't have to manually assemble them. I've checked /etc/mdadm/mdadm.conf and the UUIDs of the two arrays listed in that file match the UUIDs from $ mdadm --detail /dev/md[0,1]. Other details: Ubuntu 10.10, GRUB2, mdadm 2.6.7.1 UPDATE: I have a feeling it has to do with superblocks. $ mdadm --examine /dev/sda outputs the same thing as $ mdadm --examine /dev/sda2. $ mdadm --examine /dev/sda1 seems to be fine because it outputs information about /dev/md0. I don't know if this is the problem or not, but it seems to fit with /dev/md1 getting assembled with /dev/sd[abcd] instead of /dev/sd[abcd]2. I tried zeroing the superblock on /dev/sd[abcd]. This removed the superblock from /dev/sd[abcd]2 as well and prevented me from being able to assemble /dev/md1 at all. I had to $ mdadm --create to get it back. This also put the super blocks back to the way they were.

  Read the article

• SQL Server transaction log backups,

  - by krimerd

  Hi there, I have a question regarding the transaction log backups in sql server 2008. I am currently taking full backups once a week (Sunday) and transaction log backups daily. I put full backup in folder1 on Sunday and then on Monday I also put the 1st transaction log backup in the same folder. On tuesday, before I take the 2nd transaction log backup I move the first transaction log backup from folder1 an put it into folder2 and then I take the 2nd transaction log backup and put it in the folder1. Same thing on Wed, Thurs and so on. Basicaly in folder1 I always have the latest full backup and the latest transaction log backup while the other transaction log backups are in folder2. My questions is, when sql server is about to take, lets say 4th (Thursday) transaction log backup, does it look for the previous transac log backups (1st, 2nd, and 3rd) so that this new backup will only include the transactions from the last backup or it has some other way of knowing whether there are other transac log backups. Basically, I am asking this because all my transaction log backups seem to be about the same size and I thought that their size will depend on the amount of transactions since the last transaction log backup. Example: If you have a, lets say, full backup and then you take a transac log backup and this transac log backup is lets say 200 MB and now you immediatelly take another transac log backup, this last transac log backup should be considerably smaller than the first one because no or almost no transaction occured between these two backups, right? At least, that's what I've been assuming. What happens in my case is that this second backup is pretty much the same size as the first one and I am wondering if the reason for that is because I moved the first transac log backup to a different folder so now sql server thinks that all I have is just a full backup and it then gets all the transactions that happened since the full backup and puts it in the 2nd transac log backup. Can anyone please explain if my assumptions are right? Thanks...

  Read the article

• Bad Blocks Exist in Virtual Device PERC H700 Integrated

  - by neoX

  I have a DELL server with PERC H700 Integrated controller. I've made RAID5 with 12 harddrives and the virtual device is in Optimal state, but I receive such errors under linux: sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bc e0 00 00 01 00 00 00 end_request: I/O error, dev sda, sector 30640487648 But all disk are in Firmware state: Online, Spun Up. Also there is not a single ATA read or write error in any disk in the raid (I check them with smartctl -a -d sat+megaraid,N -H /dev/sda). The only strange thing is in the output in megacli: megacli -LDInfo -L0 -a0 ... Bad Blocks Exist: Yes How could there be bad blocks in a Virtual Drive, which is in optimal state and no disk is broken or even with a single error? I tried "Consistency Check", but it finished successfully and the errors are still in dmesg. Could Someone help me to figure it out what is wrong with my raid?

  Read the article

• Multiple contacts with shared information

  - by Keith Thompson

  Background: I currently have several hundred contacts, synchronized between a Microsoft Exchange server and several mobile devices. I also save exported copies of the contacts in .vcf format. Is there a good way (application, file format, whatever) to maintain contacts with shared information? A very common scenario is that I have contacts for two or more people who live in the same house, for example: John Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-2222 Mobile: 555-555-3333 E-mail: [email protected] Jane Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-4444 Mobile: 555-555-5555 E-mail: [email protected] As you can see, both contacts have the same home address and phone number, but distinct names and work and mobile phone numbers. (Other information might also be either shared or distinct.) The applications and file formats I'm familiar with don't seem to have a good way to deal with this. If I use a single "John & Jane Doe" contact for both, it's difficult to distinguish the distinct information (if I want to call Jane's mobile phone rather than John's). If I use a separate contact for each, I have to remember to update both of them (or all of them for N 2) when they move or change their home phone number. An ideal solution would let me create a record containing information for their household, and have each of their contact records contain a reference to the household record, so that when I view John's contact record I see both shared and distinct information. Is there anything out there that has good support this kind of thing? (I would think there would be, since it's a very common scenario.) (I suppose I could roll my own system that generates merged .vcf files from some extended format, but that wouldn't play well with synchronizing across multiple devices.)

  Read the article

• SQL Server Management Studio not scripting all objects

  - by Ian Boyd

  i've been attempting to script a database using SQL Server 2005 Management Studio. i cannot get it to script some objects. It scripts others, but skips some. i can provide detailed screen shots the options being selected including all tables the folder where the script files will go the folder being empty before scripting the scripting process saying Sucess when scripting a table the destination folder no longer empty, with a hundred or so script files the script of some tables not being in the folder. And earlier SSMS would not script some views. Is this a known thing that the the Generate Scripts task does not generate scripts? Update Known issue on Microsoft Connect, but Microsoft couldn't repro the steps, so they closed closed the ticket. Fails on SQL Server 2005, also fails on SQL Server 2008. Update Two Some basic questions: 1.What version of SQL Server? Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Microsoft SQL Server 2008 - 10.0.2531.0 (Intel X86) Microsoft SQL Server 2005 Management Studio: 9.00.4035.00 Microsoft SQL Server 2008 Management Studio: 10.0.1600.22 2.What O/S are you running on? Windows Server 2000 Windows Server 2003 Windows Server 2008 3.How are you logging in to SQL server? sa/password Trusted authentication 4.Have you verified your account has full access to all objects? Yes, i have access to all objects. 5.Can you use the objects that fail to script? (eg: select top(10) * from nonScriptingTable) Yes, all objects work fine. SQL Server Enterprise Manager can script the objects fine. Update Three They fail no matter what version of SQL Server you script against. It wasn't a problem in Enterprise Manager: Client Tools SQL Server 2000 SQL Server 2005 SQL Server 2008 ============ =============== =============== =============== 2000 Yes n/a n/a 2005 No No No 2008 No No No Update Four No errors found in the database using: DBCC CHECKDB go DBCC CHECKCONSTRAINTS go DBCC CHECKFILEGROUP go DBCC CHECKIDENT go DBCC CHECKCATALOG go EXECUTE sp_msforeachtable 'DBCC CHECKTABLE (''?'')' Honk if you hate SSMS.

  Read the article

• Windows 7: Touch gestures in IE not working without explorer.exe being run once

  - by Michael

  Details: Internet Explorer 9 and Windows 7 Professional, running on a HP TouchSmart (touch screen PC). It is going to be a kiosk PC (running a custom GUI for displaying websites). Scenario 1: When running Internet Explorer as a normal program in Windows 7, touch functions work perfectly. I can scroll the website by dragging it with my finger, I can pinch zoom and I can touch-and-hold right click. I now change the default shell in Windows to Internet Explorer (ie. IE starts instead of explorer.exe). Internet Explorer of course starts up when logging in. However, touch functions are reduced to basic clicking (no dragging, no pinch zooming, no touch-and-hold right click). Then I manually start explorer.exe, and the touch functions work again! And here is the weird part: When I kill explorer.exe, the touch functions keeps working - even if I close IE and start a new instance. Scenario 2: The exact same, but instead of changing the default shell to Internet Explorer, I change it to my own program, which uses an embedded Internet Explorer ("WebBrowser"). Same thing happens. What I've tried: Autorun programs: When explorer.exe launches, it launches all the autorun programs. There are no relevant programs being run by explorer, but just in case, I have manually started all the autorun programs, so that it is identical (but without explorer.exe) to a normal login. It still does not work (until I launch explorer.exe). Specifically TabTip.exe, TabTip32.exe and wisptis.exe are all running. All services are also started. To sum it up Running explorer.exe once changes something in the touch capabilities of Internet Explorer. It doesn't matter if explorer.exe is running - as long as it has been run once. Does anyone know what causes this behavior? Or how I can circumvent it neatly? Thanks!

  Read the article

• HP ProCurve & Cisco switches interoperability

  - by Kamil Z

  I have a couple of questions regarding Cisco and HP ProCurve interoperability. Here's a link to pdf with my network topology. Can someone help me with basic VLAN configuration in such topology? Below there are some details of my configuration: # m_management_2 interface FastEthernet0/43 switchport access vlan 250 switchport mode access spanning-tree port-priority 32 spanning-tree cost 100 # MTA2-swmgmt1 vlan 1 name "DEFAULT_VLAN" untagged 1-48 ip address 10.10.249.190 255.255.255.128 exit # MTA2-swtr1 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.188 255.255.255.128 exit # MTA2-swtr2 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.189 255.255.255.128 exit I don't post MTA2-bcsw[12] configuration, because I wasn's successfull in this one yet. Every time I configure VLANs on MTA2-bcsw[12] Fa0/24 interface on m_management_2 goes down bacause of receiving tagged BPDUs on access port (there are no VLANs configured on MTA2-swmgmt1 because of fact that only 250 VLAN is allowed in this switch. Is it correct?). Can someone provide me some basic configuration for this topology? Second thing I want to ask is concept of connection from MTA2-swmgmt1 to MTA2-swtr[12] HP switches for the sake of management. How to configure such ports on HP switches (managed switch and manager switch). Is my actual configuration correct?

  Read the article

• 16-bit MS-DOS Subsystem: csrss.exe

  - by Wesley

  Hi all, I just booted up my Samsung N120 netbook (with Windows XP Home SP3) and a dialog box came up with a command prompt window behind it. The dialog box is titled 16 bit MS-DOS Subsystem and the message is as follows: C:\DOCUME~1\SAMSUNG\csrss.exe The NTVDM CPU has encountered an illegal instruction. CS:0544 IP:0117 OP:63 00 64 00 34 Choose 'Close' to terminate the application. This only started on my most recent boot-up. One thing to note is that when I downloaded the Dropbox installer and opened it up, Panda Cloud Antivirus detected a suspicious file, which was csrss.exe and "neutralized it." However, an actual virus or trojan was not detected immediately before the file was detected and neutralized. Just under two weeks ago, a trojan and two viruses were detected for some odd reason. (I only went to website I knew and I do not torrent or browse adult sites.) Anyhow, the two viruses came up in temporary files and the trojan was "neutralized." Anyways, the main question is: How can I repair the csrss.exe file such that Windows XP starts up properly? A screenshot could be posted upon request. Thanks in advance!

  Read the article

• Preseeding Ubuntu partman recipe using LVM and RAID

  - by Swav

  I'm trying to preseed Ubuntu 12.04 server installation and created a recipe that would create RAID 1 on 2 drives and then partition that using LVM. Unfortunately partman complains when creating LVM volumes saying there no partitions in recipe that could be used with LVM (in console it complains about unusable recipe). The layout I'm after is RAID 1 on sdb and sdc (installing from USB stick so it takes sda) and then use LVM to create boot, root and swap. The odd thing is that if I change the mount point of boot_lv to home the recipe works fine (apart from mounting in wrong place), but when mounting at /boot it fails I know I could use separate /boot primary partition, but can anybody tell me why it fails. Recipe and relevant options below. ## Partitioning using RAID d-i partman-auto/disk string /dev/sdb /dev/sdc d-i partman-auto/method string raid d-i partman-lvm/device_remove_lvm boolean true d-i partman-md/device_remove_md boolean true #d-i partman-lvm/confirm boolean true d-i partman-auto-lvm/new_vg_name string main_vg d-i partman-auto/expert_recipe string \ multiraid :: \ 100 512 -1 raid \ $lvmignore{ } \ $primary{ } \ method{ raid } \ . \ 256 512 256 ext3 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext3 } \ mountpoint{ /boot } \ lv_name{ boot_lv } \ . \ 2000 5000 -1 ext4 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext4 } \ mountpoint{ / } \ lv_name{ root_lv } \ . \ 64 512 300% linux-swap \ $defaultignore{ } \ $lvmok{ } \ method{ swap } \ format{ } \ lv_name{ swap_lv } \ . d-i partman-auto-raid/recipe string \ 1 2 0 lvm - \ /dev/sdb1#/dev/sdc1 \ . d-i mdadm/boot_degraded boolean true #d-i partman-md/confirm boolean true #d-i partman-partitioning/confirm_write_new_label boolean true #d-i partman/choose_partition select Finish partitioning and write changes to disk #d-i partman/confirm boolean true #d-i partman-md/confirm_nooverwrite boolean true #d-i partman/confirm_nooverwrite boolean true EDIT: After a bit of googling I found below snippet of code from partman-auto-lvm, but I still don't understand why would they prevent that setup if it's possible to do manually and booting from boot partition on LVM is possible. # Make sure a boot partition isn't marked as lvmok if echo "$scheme" | grep lvmok | grep -q "[[:space:]]/boot[[:space:]]"; then bail_out unusable_recipe fi

  Read the article

• cyrus-sasl-lib issue on CentOS 5.3 (while installing GUI)

  - by sxanness

  I am attempting to install gnome on a CentOS 5.3 Server install so that I can speed up the process that I am working on. I ran a yum groupinstall for the x window system and gnome but I keep getting the following error. Package cyrus-sasl-plain needs cyrus-sasl-lib = 2.1.22-4, this is not available. Package cyrus-sasl needs cyrus-sasl-lib = 2.1.22-4, this is not available. Package cyrus-sasl-plain needs cyrus-sasl-lib = 2.1.22-4, this is not available. Package cyrus-sasl needs cyrus-sasl-lib = 2.1.22-4, this is not available. Complete! First thing I checked was what version of the cyrus-sasl-lib I had installed. Installed Packages cyrus-sasl-lib.i386 2.1.22-4 installed cyrus-sasl-lib.x86_64 2.1.22-4 installed Available Packages cyrus-sasl-lib.x86_64 2.1.22-5.el5 base cyrus-sasl-lib.i386 2.1.22-5.el5 base Anyhow know how I can get around this and install the stuff I need so that I can start a GUI on this machine? Thanks in advance

  Read the article

• RPCSS kerberos issues on imaged Windows workstations

  - by sysadmin1138

  While doing some unrelated troubleshooting I came across a set of Event Log entries that have me concerned. Machine Name: labcomputer82 Source: Security-Kerberos Event ID: 4 Event Description: The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server labcomputer143$. The target name used was RPCSS/imagemaster4.ad.domain.edu. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (AD.DOMAIN.EDU) is different from the client domain (AD.DOMAIN.EDU), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server. There are three machine names used in this message. It's generated on labcomputer82, it's attempting to talk to another lab workstation called labcomputer143, and the service in question (RPCSS) refers to the name of the machine that this machine was imaged from (and possibly also that of labcomputer143, I'm not sure). The thing that has me raising both eyebrows is that the machine named labcomputer82 is attempting to use an SPN of RPCSS/imagemaster4.ad.domain.edu. The SPN attribute on the computer object in AD looks just fine. It has all the names it should have. Of the over 3,000 computer objects in our AD domain, somewhere around 1,700 of the are computer-lab seats that are frequently imaged. If we're doing something wrong, I'd like to know in time to get our procedures modified (and people retrained) for fall quarter. But if this is normal for imaged machines, I'll just continue ignoring these.

  Read the article

• HAProxy + NodeJS gets stuck on TCP Retransmission

  - by sled

  I have a HAProxy + NodeJS + Rails Setup, I use the NodeJS Server for file upload purposes. The problem I'm facing is that if I'm uploading through haproxy to nodejs and a "TCP (Fast) Retransmission" occurs because of a lost packet the TX rate on the client drops to zero for about 5-10 secs and gets flooded with TCP Retransmissions. This does not occur if I upload to NodeJS directly (TCP Retransmission happens too but it doesn't get stuck with dozens of retransmission attempts). My test setup is a simple HTML4 FORM (method POST) with a single file input field. The NodeJS Server only reads the incoming data and does nothing else. I've tested this on multiple machines, networks, browsers, always the same issue. Here's a TCP Traffic Dump from the client while uploading a file: ..... TCP 1506 [TCP segment of a reassembled PDU] >> everything is uploading fine until: TCP 1506 [TCP Fast Retransmission] [TCP segment of a reassembled PDU] TCP 66 [TCP Dup ACK 7392#1] 63265 > http [ACK] Seq=4844161 Ack=1 Win=524280 Len=0 TSval=657047088 TSecr=79373730 TCP 1506 [TCP Retransmission] [TCP segment of a reassembled PDU] >> the last message is repeated about 50 times for >>5-10 secs<< (TX drops to 0 on client, RX drops to 0 on server) TCP 1506 [TCP segment of a reassembled PDU] >> upload continues until the next TCP Fast Retransmission and the same thing happens again The haproxy.conf (haproxy v1.4.18 stable) is the following: global log 127.0.0.1 local1 debug maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults log global mode http option httplog option tcplog frontend http-in bind *:80 timeout client 6000 acl is_websocket path_beg /node/ use_backend node_backend if is_websocket default_backend app_backend # Rails Server (via nginx+passenger) backend app_backend option httpclose option forwardfor timeout server 30000 timeout connect 4000 server app1 127.0.0.1:3000 # node.js backend node_backend reqrep ^([^\ ]*)\ /node/(.*) \1\ /\2 option httpclose option forwardfor timeout queue 5000 timeout server 6000 timeout connect 5000 server node1 127.0.0.1:3200 weight 1 maxconn 4096 Thanks for reading! :) Simon

  Read the article

< Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >