Search Results

Search found 56208 results on 2249 pages for 'ini set'.

Page 539/2249 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >

  • grub-efi refuses to chainload Windows 8.1

    - by Alexei Averchenko
    I have installed LMDE (with grub in MBR) after I installed Windows 8.1. I then installed the grub-efi package and added the custom Windows options: #!/bin/sh exec tail -n +3 $0 menuentry "Windows" { search --fs-uuid --no-floppy --set=root A89A-7F4C chainloader (${root})/EFI/Boot/bkpbootx64.efi } menuentry "Windows (backup bootloader)" { search --fs-uuid --no-floppy --set=root A89A-7F4C chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi } These are basically a leftover from my older Ubuntu setup. However, grub is refusing to load them, complaining about the invalid signature. What do I do now?

    Read the article

  • IP alias lost when changing main IP

    - by rmflow
    my /etc/network/interfaces: auto eth0 iface eth0 inet static address 192.168.3.75 netmask 255.255.255.0 gateway 192.168.3.0 Situation 1: After linux booted I set an IP alias: ifconfig eth0:0 192.168.3.111 Now ifconfig reports two IP addresses 192.168.3.75 at eth0 and 192.168.3.111 at eth0:0 When I change main IP to another network: ifconfig eth0 192.168.1.111 the alias eth0:0 is lost! Situation 2: After linux booted I set an IP alias: ifconfig eth0:0 192.168.4.111 Now ifconfig reports two IP addresses 192.168.3.75 at eth0 and 192.168.4.111 at eth0:0 When I change main IP to another network: ifconfig eth0 192.168.1.111 the alias eth0:0 stays! How do I properly change main IP, so all my aliases are not lost?

    Read the article

  • Secure PHP environments with PHP-FPM and SFTP

    - by pdd
    I'd like to set up secure environments for a small number of untrusted PHP websites on a Debian server. Right now everything runs on the same Apache2 with mod_php5 and vsftpd for administrative file access, so there is room for improvement. The idea is to use nginx instead of apache, SFTP through OpenSSH instead of vsftpd and chrooted (in sshd_config), individual users for each website with their own pool of PHP processes. All these users and nginx are part of the same group. Now in theory I can set 700 permissions on all PHP scripts and 750 on static files that nginx has to serve up. Theoretically, if a website is compromised all the other users' data is safe, right? Are there better solutions that require less setup time and memory per website? Cheers

    Read the article

  • Godaddy hosting with dynamic ip?

    - by Razor Storm
    I bought a domain name on godaddy.com let's call it www.website.com, but my server has a dynamic ip, how do I resolve this issue? What I've tried: get a dns account at dyndns.com let's call it dns.dyndns.com, so I set up godaddy to forward the domain to dns.dyndns.com. problem: When the user goes to www.website.com, they see dns.dyndns.com in the url bar. Bad So then I set up the forwarding on godaddy to forward with domain masking, but then the problem is now that users can't even see url paths/get queries/ or hash marks anymore! `www.website.com/folder/search?id=4#ajax=4` becomes just www.website.com in the url bar. bad! What do I do?

    Read the article

  • What could be causing Windows to randomnly reset the system time to a random time?

    - by Jonathan Dumaine
    My Windows 7 machine infuriates me. It cannot hold a date. At one point it all worked fine, but now it will decide that it needs to change the system time to a random time and date either in the future or past. There seems to be no correlation or set interval of when it happens. To remedy it I have: Correctly set the time in bios. Replaced the motherboard battery with a new CR2032 (even checked it with a multimeter). Tried disabling automatic internet synchronizing via "Date and Time" dialog. Stopped, restarted, left disabled the Windows Time service. Yet with all of these actions, the time will continue to change. Any ideas?

    Read the article

  • How to setup phpmyadmin with nginx and access it from http://vps-ip/phpmyadmin

    - by Danny
    The phpmyadmin files are located here /usr/share/phpmyadmin/ And I have this server block code that allows me to access phpmyadmin only from http://vps-ip/: server { listen 80; ## listen for ipv4; this line is default and implied #listen [::]:80 default ipv6only=on; ## listen for ipv6 root /usr/share/phpmyadmin/; index index.php index.html index.htm; server_name ein; location / { root /usr/share/phpmyadmin/; index index index.php; try_files $uri/ $uri /index.php?q=$uri&amp&$args; port_in_redirect off; } location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; log_not_found off; expires max; root /usr/share/phpmyadmin/; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; #NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini fastcgi_pass php; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin/$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 360; fastcgi_read_timeout 360; fastcgi_buffer_size 128k; fastcgi_buffers 8 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; } location ~ /.htaccess { deny all; log_not_found off; access_log off; } location ~ /.htpasswd { deny all; log_not_found off; access_log off; } location = /favicon.ico { allow all; log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } } What changes I need to do in order to access phpmyadmin from http://vps-ip/phpmyadmin ?

    Read the article

  • SQL server 2008 R2 installation error

    - by Sonia
    I have a windows 7,32 bit laptop. I am the administrator with all permissions. when I click on the SQL server 2008R2 set up file,it says : "SQL server set up has encountered the following error:Failed to retreive data for this request" click on OK. I have uninstalled all the components of SQL from control panel. I used Windows installer clean up to remove the files(which I must have not done ),but still no go. The summary.txt log says: Overall summary: Final result: Failed: see details below Exit code (Decimal): 847168662 Exit facility code: 638 Exit error code: 50326 Exit message: Failed to retrieve data for this request. Start time: 2012-05-25 14:59:15 End time: 2012-05-25 15:00:09 Requested action: RunRules Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120525_145905\Detail.txt Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.5500.0%26EvtType%3d0xEF814B06%400x92D13C14 Machine Properties: Machine name: EWAN-PC Machine processor count: 4 OS version: Windows Vista OS service pack: Service Pack 1 OS region: Australia OS language: English (United States) OS architecture: x86 Process architecture: 32 Bit OS clustered: No Package properties: Description: SQL Server Database Services 2008 SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9} ProductName: SQL2008 Type: RTM Version: 10 SPLevel: 0 Installation location: c:\385030d65c6ff61fb9\x86\setup\ Installation edition: EXPRESS User Input Settings: ACTION: RunRules CONFIGURATIONFILE: FEATURES: HELP: False INDICATEPROGRESS: False INSTANCENAME: QUIET: False QUIETSIMPLE: False RULES: GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2005InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120525_145905\ConfigurationFile.ini Detailed results: Rules with failures: Global rules: There are no scenario-specific rules. Rules report file: The rule result report file is not available. Exception summary: The following is an exception stack listing the exceptions in outermost to innermost order Inner exceptions are being indented Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException Message: Failed to retrieve data for this request. Data: HelpLink.ProdName = Microsoft SQL Server HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink HelpLink.LinkId = 20476 DisableWatson = true Stack: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream) at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue() at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(HandleInternalException exceptionHandler) at Microsoft.SqlServer.Chainer.Setup.Setup.RunRequestedWorkflow() at Microsoft.SqlServer.Chainer.Setup.Setup.Run() at Microsoft.SqlServer.Chainer.Setup.Setup.Start() at Microsoft.SqlServer.Chainer.Setup.Setup.Main() Inner exception type: Microsoft.SqlServer.Configuration.Sco.ScoException Message: Attempted to perform an unauthorized operation. Data: WatsonData = HKEY_LOCAL_MACHINE@SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Microsoft SQL Server 10 Stack: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) at Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) at Microsoft.SqlServer.Discovery.RegistryKeyExistsPropertyValueProvider.GetPropertyValue(Object[] context) at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetPropertyValueFromProvider(IPropertyValueProvider propertyValueProvider, String machineName, Object[] context) at Microsoft.SqlServer.Discovery.ObjectInstanceSettings.IsObjectFound(String machineName, String idFilter) at Microsoft.SqlServer.Discovery.Product.FilterObjectSet(ArrayList objects, String idFilter) at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent) at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData() at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci) at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request) at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request) Inner exception type: System.UnauthorizedAccessException Message: Attempted to perform an unauthorized operation. Stack: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) Ineed to install SQL server 2008 R2 for one of the company softwares to work. Any immediate help will be greatly appreciated. Thanks Sonia

    Read the article

  • Can not input or print Chinese on PuTTY

    - by hetaoblog
    On Red Hat Enterprise Linux AS release 3, I've set my environment variable as below $ echo $LANG zh_CN.UTF-8 $ echo $LANGUAGE zh_CN.UTF-8 $ echo $SUPPORTED en_US.UTF-8:en_US:en:zh_CN.UTF-8 $ locale LANG=zh_CN.UTF-8 LC_CTYPE="zh_CN.UTF-8" LC_NUMERIC="zh_CN.UTF-8" LC_TIME="zh_CN.UTF-8" LC_COLLATE="zh_CN.UTF-8" LC_MONETARY="zh_CN.UTF-8" LC_MESSAGES="zh_CN.UTF-8" LC_PAPER="zh_CN.UTF-8" LC_NAME="zh_CN.UTF-8" LC_ADDRESS="zh_CN.UTF-8" LC_TELEPHONE="zh_CN.UTF-8" LC_MEASUREMENT="zh_CN.UTF-8" LC_IDENTIFICATION="zh_CN.UTF-8" LC_ALL=zh_CN.UTF-8 Meanwhile I've set PuTTY's transmission encoding as utf-8 and appearance-font setting to have a font as 'Fixedsys' which does support chinese. However, when I try to print a file with Chinese, it can not print it correctly $ cat 1.txt hello¦¦¦ $ and I can not input Chinese correctly on shell.

    Read the article

  • Remote Desktop to Virtual Machine

    - by Valvaris
    Hello: I recently reformatted one of my servers with Windows Server 2008 x64 and with that, installed the latest version of VMWare server on it. Within that, I created a new Windows Server 2003 R2 x86 virtual machine for the purposes of being a backup domain controller. I was able to successfully configure it as a domain controller and have it provide DNS service to my domain. I've been using the VMWare remote console to set this up and figured it was time to get remote desktop working. I set it up as I have with many other computers on my network (hitting the checkbox, making the firewall isn't blocking it) and I cannot get remote desktop to connect to it. I've tried using the computer name and its IP address neither work. I can ping the computer from the outside but the Virtual machine cannot ping anything from inside it. All machines are on the same subnet. I can't seem to figure this out.

    Read the article

  • Merging Two KML Files to Display Them with Different Marker Icons on Google Maps

    - by Maxim Z.
    Let's say that I have two spreadsheets with addresses. I uploaded these spreadsheets into Google Fusion Tables, geocoded the addresses, and exported the results as KML files. Now, I want to take these two KML files and merge them, while maintaining the location data and using it to map the points with Google Maps. Well, I found a way to easily merge the KML files: import both of them into a "My Maps" map with Google Maps! However, my problem is this: when I do that, all of the locations in my data have the same marker icon on the map. From past experience, I know that these markers can be somehow defined inside the KML files. Is it possible to combine these two KML files while giving one's points one marker icon and the other's points another marker icon? Just in case my question is confusing, what I mean, is giving the first set of points blue markers, for example, and the other set of points red markers, so that they can be overlayed.

    Read the article

  • Configuring TMUX's status bar

    - by wdkrnls
    I want my tmux session to show my current ip address in the right hand side of the status bar but I am having the hardest time figuring up the right syntax. The command works perfectly in the shell, but tmux won't parse it. set -g status-right '#[fg=white]#(host (hostname))' [Note: I am using the fish shell] I really want it to be: set -g status-right '#[fg=white]#(hostname)@#(host (hostname) | cut -d " " -f 4)' But since I can't get the former status bar to work, this is a lost cause. The weird thing is I got the first one to work once, but then I added the cut.

    Read the article

  • Setting up Ubuntu Server on Amazon EC2 for hosting multiple domains with wildcard subdomains

    - by Ashish Kumar
    I'm trying to set up multiple domains on my Amazon EC2 micro instance running Ubuntu Server 12.04. I installed Apache correctly and set up virtual hosts but having problems with wildcard subdomains. This is what my httpd.conf file looks like NameVirtualHost *:80 <VirtualHost *:80> UseCanonicalName Off VirtualDocumentRoot /home/username/domains/%0/html/ </VirtualHost> My DNS records (on Amazon Route 53) are: domain.tld A 1.2.3.4 *.domain.tld A 1.2.3.4 If i create a test.domain.tld directory with the html subdirectory, it works fine. But what I want to do is to redirect *.domain.tld to domain.tld in case there is no directory for the sub-domain accessed. I would also like www.domain.tld to redirect to domain.tld. The system should also work if I decide to host another website, example.com, on the server. I tried Googling a lot but without any luck. Suggestions?

    Read the article

  • Resizing RAID 1 Array on Dell PowerEdge with Perc 4/Di & Windows SBS 2003

    - by Scott McKinney
    I have a Dell PowerEdge 2600 with Perc 4/Di RAID card and Windows SBS 2003 installed. The original system drive was a set of 17GB drives in a RAID 1 array. Over the years, these drives have failed (individually) and been replaced by a set of 73GB drives, but the RAID array is still 17GB in size. Is there a safe procedure to resize the RAID 1 array to use the entire 73GB without destroying/corrupting the data on the array? The Perc documentation mentions a Reconstruct option with Online Capacity Expansion, but is a woefully short on the exact details. Has anyone performed this procedure successfully (or unsuccessfully)? What were the steps? Are there any gotchas I should watch out for?

    Read the article

  • Terminal services and memory limits

    - by Mark Wassell
    Is there a way in Terminal Services to set limits on memory related parameters for a process. For example working set size and, possibly, if it makes sense, total virtual memory allocation for the session? To turn the question around, we have an application which cannot allocate as much virtual memory running on a terminal server as it can when running on a desktop PC (both I would expect to have a limit of 2GB for user mode address space) and I was wondering if there is another limit for processes or users on a terminal server. Perhaps even 2GB per user rather than per process.

    Read the article

  • Pure-FTPd: Which IP Address To Use For Login?

    - by mschooler93
    I am trying to connect to my VirtualBox LAMP Server with FileZilla, and it's not working. I have a static IP set, a FTP user set (with FTPd), and can connect successfully with ftp localhost, but not with Filezilla with the same credentials. I suspect this is because I am using the wrong IP address in the Host box. so is there a command I can use to display the IP address used to connect to my FTP? BTW, error code given in FileZilla is: Status: Connection established, waiting for welcome message... Response: 425 Sorry, invalid address given Error: Could not connect to server

    Read the article

  • RAID Array performance on an HP Proliant ML350 G5 Smart Array E200i

    - by Nate Pinchot
    We have a client who is complaining about performance of an application which utilizes an MS SQL database. They do not believe the performance issues are the fault of the application itself. The Smart Array E200i RAID controller has 128MB cache and we have the cache set to 75% read/25% write. The disk array set to enable write caching. Recently we ran a disk performance test using SQLIO based on this guide. We used a 10 GB file for the test found that the average sequential read rate was ~60 MB/sec (megabytes/sec) and the average random read rate was ~30 MB/sec. Are these numbers on par for what the server should be performing? Better than on par? Horrible? Amazing?

    Read the article

  • VPN authentication and MAC addresses

    - by zakk
    I have to set up a VPN (various clients connecting to a web service on a server, which is also the VPN server) and I want to make sure that no user will share his/her credentials with third parties. I know that this problem is not solvable completely, but I'd want to set up some additional security checks... Some idea I have: 1) An additional check on MAC address, but... are MAC addresses preserved thru VPN? 2) Some kind of extra identification of the client (User Agent, open ports, I want to make sure that is the very same client I authorized). 3) I would like to avoid commercial solutions like a security token... I realize it would be the perfect solution, but it will be to expensive, I suppose... Do you feel that these options are viable? Do you have any other ideas? Thanks in advance for your replies!

    Read the article

  • Custom resolution - Windows 7 - no drivers

    - by Vytautas Butkus
    I'm having some problems with my VGA card. When I enable my VGA drivers and boot windows up they crash and I get message that the problem occured with atimdag.sys drivers or smth like that. I'm gettin BSOD all the time, unless I go to control panel and I disable drivers manually. I can live with disabled drivers just fine(I'm already used to it in quite some time) but the annoying problem is my display resolution. I can not set my res to anything higher than 1024x768. I was wondering if it's possible to change resolution to my native displays resolution without drivers? I've been trying to find something that would work w/o drivers, but with no luck(I've found many of solutions how to do it with working drivers, but as you know I can not enable my drivers). So please, maybe someone could help me and tell me how to set custom resolution?

    Read the article

  • What things should I run daily, weekly, monthly on my Windows machine?

    - by Jitendra vyas
    What things should I run daily, weekly, monthly on my Windows XP machine? De fragmentation Scan-disk Full system scan Disk clean up Trojan checker malware remover or any other thing... And should I run all these things in Safe-mode always? I want to perform all mentioned things automatically at night. How to set schedule and What would be the best plan? For daily weekly and monthly? I've 300 GB SATA HDD with 6 partition. I would like to know in above mentioned list: Which process should I run daily? Which process should I run weekly? Which process should I run on monthly basis How to set schedule for all in Windows task scheduler?

    Read the article

  • UnicodeEncodeError when uploading files in Django admin

    - by Samuel Linde
    Note: I asked this question on StackOverflow, but I realize this might be a more proper place to ask this kind of question. I'm trying to upload a file called 'Testaråäö.txt' via the Django admin app. I'm running Django 1.3.1 with Gunicorn 0.13.4 and Nginx 0.7.6.7 on a Debian 6 server. Database is PostgreSQL 8.4.9. Other Unicode data is saved to the database with no problem, so I guess the problem must be with the filesystem somehow. I've set http { charset utf-8; } in my nginx.conf. LC_ALL and LANG is set to 'sv_SE.UTF-8'. Running 'locale' verifies this. I even tried setting LC_ALL and LANG in my nginx init script just to make sure locale is set properly. Here's the traceback: Traceback (most recent call last): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/handlers/base.py", line 111, in get_response response = callback(request, *callback_args, **callback_kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 307, in wrapper return self.admin_site.admin_view(view)(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/views/decorators/cache.py", line 79, in _wrapped_view_func response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/sites.py", line 197, in inner return view(request, *args, **kwargs) File "/srv/django/letebo/app/cms/admin.py", line 81, in change_view return super(PageAdmin, self).change_view(request, obj_id) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 28, in _wrapper return bound_func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 24, in bound_func return func(self, *args2, **kwargs2) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/transaction.py", line 217, in inner res = func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 985, in change_view self.save_formset(request, form, formset, change=True) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 677, in save_formset formset.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 482, in save return self.save_existing_objects(commit) + self.save_new_objects(commit) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 613, in save_new_objects self.new_objects.append(self.save_new(form, commit=commit)) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 717, in save_new obj.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 460, in save self.save_base(using=using, force_insert=force_insert, force_update=force_update) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 504, in save_base self.save_base(cls=parent, origin=org, using=using) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 543, in save_base for f in meta.local_fields if not isinstance(f, AutoField)] File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 255, in pre_save file.save(file.name, file, save=False) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 92, in save self.name = self.storage.save(name, content) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 48, in save name = self.get_available_name(name) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 74, in get_available_name while self.exists(name): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 218, in exists return os.path.exists(self.path(name)) File "/srv/.virtualenvs/letebo/lib/python2.6/genericpath.py", line 18, in exists st = os.stat(path) UnicodeEncodeError: 'ascii' codec can't encode characters in position 52-54: ordinal not in range(128) I tried running Gunicorn with debugging turned on, and the file uploads without any problem at all. I suppose this must mean that the issue is with Nginx. Still beats me where to look, though. Here are the raw response headers from Gunicorn and Nginx, if it makes any sense: Gunicorn: HTTP/1.1 302 FOUND Server: gunicorn/0.13.4 Date: Thu, 09 Feb 2012 14:50:27 GMT Connection: close Transfer-Encoding: chunked Expires: Thu, 09 Feb 2012 14:50:27 GMT Vary: Cookie Last-Modified: Thu, 09 Feb 2012 14:50:27 GMT Location: http://my-server.se:8000/admin/cms/page/15/ Cache-Control: max-age=0 Content-Type: text/html; charset=utf-8 Set-Cookie: messages="yada yada yada"; Path=/ Nginx: HTTP/1.1 500 INTERNAL SERVER ERROR Server: nginx/0.7.67 Date: Thu, 09 Feb 2012 14:50:57 GMT Content-Type: text/html; charset=utf-8 Transfer-Encoding: chunked Connection: close Vary: Cookie 500 UPDATE: Both locale.getpreferredencoding() and sys.getfilesystemencoding() outputs 'UTF-8'. locale.getdefaultlocale() outputs ('sv_SE', 'UTF8'). This seem correct to me, so I'm still not sure why I keep getting these errors.

    Read the article

  • Changing the cell range of conditional formatting in LibreOffice Calc

    - by Simon Lundberg
    Is there any way of changing the range of conditional formatting in LibreOffice Calc (version 3.6)? I have a set applied already to a range of cells, but there is no obvious way of changing which cells a given set of conditional formatting is applied to. I either have to copy and paste the formatting, which results in multiple entries in the conditional formatting (which makes it difficult to manage), or delete the entire thing and create a new one every single time I want to change the range of cells. Is there a better way? link to screenshot

    Read the article

  • Changing Windows public folder in batch script.

    - by Angus
    I've installed Steam on an external hard drive so I can play games on different computers by just moving the drive around. Since save games are often saved in My Documents or AppData, but I want them to move with the external hard drive, I wrote a batch file that sets environment variables before starting steam. setocal set USERPROFILE=%EXTERNAL_LETTER%\Profile\Me set APPDATA=%USERPROFILE%\AppData\Roaming ... start %TARGETAPP% endlocal I'm not sure if this is the right way to do this on Windows, but it seems to work. However, one game saves its games in the Shared Documents folder. I've tried setting %PUBLIC% and %ALLUSERSPROFILE% but that does not seem to affect where the game looks. Is it possible to make this one program use a different Shared Documents folder, either by environment variables or some other means? The change in Shared Documents should only affect the one program, I do not want it to be a permanent or system wide change to Windows.

    Read the article

  • Vim: :silent with makeprg

    - by ash
    I use pylint on .py files for :make in my .vimrc, although any program, pylint or otherwise, applies to this problem. set makeprg=pylint\ --reports=n\ --output-format=parseable\ % When I run :make, I inevitably get the annoying Press ENTER or type command to continue prompt. I know this can be disabled with :silent, but I can't prepend it to the makeprg variable like this, because it throws an error: set makeprg=:silent "pylint\ --reports=n\ --output-format=parseable\ %" If I try to have my own "Silent make command," command Smake silent make The screen goes black after calling it. How would I do it?

    Read the article

  • Setting alias for DynDNS domain

    - by metalball
    Hey all, I've created DynDNS domain for testing my local sites, and i'm having trouble with pointing to root domain. From my registrar (GoDaddy) I've created a CNAME for www to point my example.dyndns.com so going to url www.example.com I'm reaching my site. But if I'm going to example.com I'm reaching to the IP of the A record. I can't set the IP for the A record to be my IP because I have dynamic IP, and it changes constatly, and I can't point the A record to domain, only IP. When trying to create CNAME record @ to point example.dyndns.com I'm getting error "A record of a different type exists for the hostname @, could not create CNAME" The only record using the '@' host are NS record, which I can't delete, and when tried to set another NS record with @ point to example.dyndns.com, I've lost connection to my site :) So what can I do to get example.com url reach my site? Thanx!

    Read the article

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >