Search Results

Search found 2299 results on 92 pages for 'alec smart'.

Page 54/92 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Authorization design-pattern / practice?

    - by Lawtonfogle
    On one end, you have users. On the other end, you have activities. I was wondering if there is a best practice to relate the two. The simplest way I can think of is to have every activity have a role, and assign every user every role they need. The problem is that this gets really messy in practice as soon as you go beyond a trivial system. A way I recently designed was to have users who have roles, and roles have privileges, and activities require some combinations of privileges. For the trivial case, this is more complex, but I think it will scale better. But after I implemented it, I felt like it was overkill for the system I had. Another option would be to have users, who have roles, and activities require you to have a certain role to perform with many activities sharing roles. A more complex variant of this would given activities many possible roles, which you only needed one of. And an even more complex variant would be to allow logical statements of role ownership to use an activity (i.e. Must have A and (B exclusive or C) and must not have D). I could continue to list more, but I think this already gives a picture. And many of these have trade offs. But in software design, there are oftentimes solutions, while perhaps not perfect in every possible case, are clearly top of the pack to an extent it isn't even considered opinion based (i.e. how to store passwords, plain text is worse, hashing better, hashing and salt even better, despite the increased complexity of each level) (i.e. 2, Smart UI designs for applications are bad, even if it is subjective as to what the best design is). So, is there a best practice for authorization design that is not purely opinion based/subjective?

    Read the article

  • CodePlex Daily Summary for Thursday, October 31, 2013

    CodePlex Daily Summary for Thursday, October 31, 2013Popular ReleasesTCPEssentials: TCPEssentials 1.0.0.1: Changed the name of method SplitArray to Split. Standardization is important...Community Forums NNTP bridge: Community Forums NNTP Bridge V54 (LiveConnect): This is the first release which can be used with the new LiveConnect authentication. Fixes the problem that the authentication will not work after 1 hour. Also a logfile will now be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt".WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.9 binaries: Fixed issue with ICollectionView containg null values (AutoFilter issue)Community TFS Build Extensions: October 2013: The October 2013 release contains Scripts - a new addition to our delivery. These are a growing library of PowerShell scripts to use with VS2013. See our documentation for more on scripting. VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 Community TFS Build Manager VS2013 The Community TFS Build Managers for VS2010, 2012 and 2013 can also be found in the Visual Studio Gallery where upda...SuperSocket, an extensible socket server framework: SuperSocket 1.6 stable: Changes included in this release: Process level isolation SuperSocket ServerManager (include server and client) Connect to client from server side initiatively Client certificate validation New configuration attributes "textEncoding", "defaultCulture", and "storeLocation" (certificate node) Many bug fixes http://docs.supersocket.net/v1-6/en-US/New-Features-and-Breaking-ChangesBarbaTunnel: BarbaTunnel 8.1: Check Version History for more information about this release.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.1: v 2.1 Added the 'Should' class instead of the 'Validate' class. The 'Validate' class is now obsolete. Added 'Toolkit.Annotations' to support the Mugen MVVM Toolkit ReSharper plugin. Updated JetBrains annotations within the project. Added the 'GlobalSettings.DefaultActivationPolicy' property to represent the default activation policy. Removed the 'GetSettings' method from the 'ViewModelBase' class. Instead of it, the 'GlobalSettings.DefaultViewModelSettings' property is used. Updated...NAudio: NAudio 1.7: full release notes available at http://mark-dot-net.blogspot.co.uk/2013/10/naudio-17-release-notes.htmlLayered Architecture Solution Guidance (LASG): LASG 1.0.1.0 for Visual Studio 2012: PRE-REQUISITES Open GAX (Please install Oct 4, 2012 version) Microsoft® System CLR Types for Microsoft® SQL Server® 2012 Microsoft® SQL Server® 2012 Shared Management Objects Microsoft Enterprise Library 6.0 (for the generated code) Windows Azure SDK (for layered cloud applications) Silverlight 5 SDK (for Silverlight applications) THE RELEASE This release only works on Visual Studio 2012. Known Issue If you choose the Database project, the solution unfolding time will be slow....DirectX Tool Kit: October 2013: October 28, 2013 Updated for Visual Studio 2013 and Windows 8.1 SDK RTM Added DGSLEffect, DGSLEffectFactory, VertexPositionNormalTangentColorTexture, and VertexPositionNormalTangentColorTextureSkinning Model loading and effect factories support loading skinned models MakeSpriteFont now has a smooth vs. sharp antialiasing option: /sharp Model loading from CMOs now handles UV transforms for texture coordinates A number of small fixes for EffectFactory Minor code and project cleanup ...ExtJS based ASP.NET Controls: FineUI v4.0beta1: +2013-10-28 v4.0 beta1 +?????Collapsed???????????????。 -????:window/group_panel.aspx??,???????,???????,?????????。 +??????SelectedNodeIDArray???????????????。 -????:tree/checkbox/tree_checkall.aspx??,?????,?????,????????????。 -??TimerPicker???????(????、????ing)。 -??????????????????????(???)。 -?????????????,??type=text/css(??~`)。 -MsgTarget???MessageTarget,???None。 -FormOffsetRight?????20px??5px。 -?Web.config?PageManager??FormLabelAlign???。 -ToolbarPosition??Left/Right。 -??Web.conf...CODE Framework: 4.0.31028.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.VidCoder: 1.5.10 Beta: Broke out all the encoder-specific passthrough options into their own dropdown. This should make what they do a bit more clear and clean up the codec list a bit. Updated HandBrake core to SVN 5855.Indent Guides for Visual Studio: Indent Guides v14: ImportantThis release has a separate download for Visual Studio 2010. The first link is for VS 2012 and later. Version History Changed in v14 Improved performance when scrolling and editing Fixed potential crash when Resharper is installed Fixed highlight of guides split around pragmas in C++/C# Restored VS 2010 support as a separate download Changed in v13 Added page width guide lines Added guide highlighting options Fixed guides appearing over collapsed blocks Fixed guides not...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.3 (mvc5): version 3.5.3 - support for mvc5 version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 ========================== - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js...Media Companion: Media Companion MC3.585b: IMDB plot scraping Fixed. New* Movie - Rename Folder using Movie Set, option to move ignored articles to end of Movie Set, only for folder renaming. Fixed* Media Companion - Fixed if using profiles, config files would blown up in size due to some settings duplicating. * Ignore Article of An was cutting of last character of movie title. * If Rescraping title, sort title changed depending on 'Move article to end of Sort Title' setting. * Movie - If changing Poster source order, list would beco...MoreTerra (Terraria World Viewer): MoreTerra 1.11.4: Release 1.11.4 =========== = Compatibility = =========== Updated to add the new tiles/walls in 1.2.1Emptycanvas: Emptycanvas v21: Maintenant plusieurs lumières possibles.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.0.7: This is a bug fix release, containing some important fixes! Fixed issue where Session 0 was not detected correctly, resulting in issues when attempting to display a UI when none was allowed Fixed Installation Prompt and Installation Restart Prompt appearing when deploy mode was non-interactive or silent Fixed issue where defer prompt is displayed after force closing multiple applications Fixed issue executing blocked app execution dialog from UNC path (executed instead from local tempo...BlackJumboDog: Ver5.9.7: 2013.10.24 Ver5.9.7 (1)FTP???????、2?????????????shift-jis????????????? (2)????HTTP????、???????POST??????????????????New ProjectsBF4Rcon.NET: BF4Rcon.NET is a .NET library for Battlefield 4's remote server administration interface.Command Processor: Command Processor with "Command Query Responsibility" prencipleDqyt.sk: a solution for sk project.Edit Visual Studio LoadTest Results' Name and Description: A simple addin to Visual Studio 2012 and Visual Studio 2010, which enables a LoadTest user to be able to give custom name and description for their loadtest.Grauers Set Metadata Properties: Use this to automatically set ISSUE, APPROVED BY and APPROVED DATEIkeCode WP7.1+ Toolkit: IkeCode WP7.1+ Toolkit is an initiative to create methods that facilitate the development of application.MongoDAO: MongoDB C#NB_Store Payment On Delivery Gateway: NB_Store Payment On Delivery Gateway allows you to add "Paymeny On Delivery" to your NB_Store webshop on DNN.occupie: // to doOffice and PDF API for .NET Components: As an independent .NET component, Spire.Office doesn't need Microsoft Office to be installed on System. It supports C# word, C# Excel and C# PDF.SharePoint Workflow Manager | Bulk Start or Terminate workflows: SharePoint Workflow Manager allows you bulk start or terminate SharePoint workflows on all items in a list.System App: The System App is a sleek, smart and open-source IT mapping and monitoring tool by Zalando.TCPEssentials: TCPEssentials is a C# Library that helps simplify the task of managing TCP connections, and also gives you a few tools that may be useful.Wangls: ???WindowSMART: WindowSMART 2013 and Home Server SMART 2013 are powerful hard disk and SSD health monitoring, reporting and alerting tools for Windows.

    Read the article

  • Read only file system error on ubuntu after partitioning

    - by Ranjith R
    I am not sure if I am the root cause of this problem but this is what I did: I wanted latest ubuntu and latest linux mint together on my thinkpad laptop. Windows 7 was already there. I already had mint. So I put in the USB with ubuntu image and started installing ubuntu. I chose to install side by side. It was taking a long time to finish defragmenting and partitioning. I decided to give up as I became a little impatient and I pressed the skip button. After the skipping, I realized that the partitioning was complete and went ahead with installing ubuntu. Now the linux mint OS starts reporting the file system as read only at least once every day and I have restart and tell the OS to fix errors in hard disk. After I press F key, the system fixes the issues, restarts and all is well again. Is there some way to fix the issue permanently. I think reinstalling will solve the issues, but I can not do it as I have a lot of data and I will have reinstall and configure a lot of softwares that I use daily. I checked the smart check in disk utility and the hard disk seems to be fine Also I checked both the partitions for errors with disk utility and the report says they are fine. Is there something I can do before I reinstall?

    Read the article

  • Further question on Intel graphics driver

    - by Thomas Byers
    Ok, Josh answered almost immed.! I need to know specifically, now that I am using Nvidia card effectively, do I need to allow update manager to update the intel gr. drivers? I must add, I believe I know why Update Manager is telling me I need to update those Intel gr. drivers. It probably happened because I tried to update my nvidia drivers and got a buggy install, which let to to a black screen. I shut the system down manually after that and rebooted to a black screen and upon a further reboot I ascertained that I could still dual-boot(windows 7) into the other os. Then I went through the restart process and at the grub2 menu chose other options and it was probably, at that time, that Linux was smart enough to know that nvidia drivers as installed weren't cutting it, and reverted to the onboard Intel graphics system...does that make sense? Anyway, after successfully getting up and running, I reinstalled my old but successful nvidia drivers and all was well again, except now upon running Update Manager, I am offered the Intel graphics driver upgrade each time, which, up til now I have unchecked...my question is now more obvious. Should I accept the Intel driver update and if I do, will it once again override my nvidia drivers?

    Read the article

  • How much knowledge do I need to begin a project in Django

    - by Smock
    I started learning django about a month ago. I have an intermediate C, Java programming experience. I read the first 8 chapters of the django book . Afterwards, I picked up Practical Django Projects by James Bennett and did the first two projects: CMS & Web Blog. Although, I started getting lost when he got to the generic views part. I know that's important but I'm not sure how important that is when trying to implement a project. Anyway, I have a project in mind that I'd like to start; however, I'm nervous as to where to begin. I'm overwhelmed with the number of things that I'd like my project to do but no knowledge or minimal knowledge as to how e.g. how do i implement css and javascript in my project. Moreover, I am aware that some django packages exists to ease development but I don't know if I should use them or not. Anyway, I apologize for my length message. I just want some advice/encouragement. I have a project in mind but do you think I need to read more materials/tutorials or is it smart to just start working on my project based on the minimal knowledge i've gained from those books? Any information that can be provided is much appreciated. I really want to get good at this but I just need some direction.

    Read the article

  • Failed Project: When to call it?

    - by Dan Ray
    A few months ago my company found itself with its hands around a white-hot emergency of a project, and my entire team of six pulled basically a five week "crunch week". In the 48 hours before go-live, I worked 41 of them, two back to back all-nighters. Deep in the middle of that, I posted what has been my most successful question to date. During all that time there was never any talk of "failure". It was always "get it done, regardless of the pain." Now that the thing is over and we as an organization have had some time to sit back and take stock of what we learned, one question has occurred to me. I can't say I've ever taken part in a project that I'd say had "failed". Plenty that were late or over budget, some disastrously so, but I've always ended up delivering SOMETHING. Yet I hear about "failed IT projects" all the time. I'm wondering about people's experience with that. What were the parameters that defined "failure"? What was the context? In our case, we are a software shop with external clients. Does a project that's internal to a large corporation have more space to "fail"? When do you make that call? What happens when you do? I'm not at all convinced that doing what we did is a smart business move. It wasn't my call (I'm just a code monkey) but I'm wondering if it might have been better to cut our losses, say we're not delivering, and move on. I don't just say that due to the sting of the long hours--the company royally lost its shirt on the project, plus the intangible costs to the company in terms of employee morale and loyalty were large. Factor that against the PR hit of failing to deliver a high profile project like this one was... and I don't know what the right answer is.

    Read the article

  • Are your personal insecurities screwing up your internal communications?

    - by Lucy Boyes
    I do some internal comms as part of my job. Quite a lot of it involves talking to people about stuff. I’m spending the next couple of weeks talking to lots of people about internal comms itself, because we haven’t done a lot of audience/user feedback gathering, and it turns out that if you talk to people about how they feel and what they think, you get some pretty interesting insights (and an idea of what to do next that isn’t just based on guesswork and generalising from self). Three things keep coming up from talking to people about what we suck at  in terms of internal comms. And, as far as I can tell, they’re all examples where personal insecurity on the part of the person doing the communicating makes the experience much worse for the people on the receiving end. 1. Spending time telling people how you’re going to do something, not what you’re doing and why Imagine you’ve got to give an update to a lot of people who don’t work in your area or department but do have an interest in what you’re doing (either because they want to know because they’re curious or because they need to know because it’s going to affect their work too). You don’t want to look bad at your job. You want to make them think you’ve got it covered – ideally because you do*. And you want to reassure them that there’s lots of exciting work going on in your area to make [insert thing of choice] happen to [insert thing of choice] so that [insert group of people] will be happy. That’s great! You’re doing a good job and you want to tell people about it. This is good comms stuff right here. However, you’re slightly afraid you might secretly be stupid or lazy or incompetent. And you’re exponentially more afraid that the people you’re talking to might think you’re stupid or lazy or incompetent. Or pointless. Or not-adding-value. Or whatever the thing that’s the worst possible thing to be in your company is. So you open by mentioning all the stuff you’re going to do, spending five minutes or so making sure that everyone knows that you’re DOING lots of STUFF. And the you talk for the rest of the time about HOW you’re going to do the stuff, because that way everyone will know that you’ve thought about this really hard and done tons of planning and had lots of great ideas about process and that you’ve got this one down. That’s the stuff you’ve got to say, right? To prove you’re not fundamentally worthless as a human being? Well, maybe. But probably not. See, the people who need to know how you’re going to do the stuff are the people doing the stuff. And those are the people in your area who you’ve (hopefully-please-for-the-love-of-everything-holy) already talked to in depth about how you’re going to do the thing (because else how could they help do it?). They are the only people who need to know the how**. It’s the difference between strategy and tactics. The people outside of your bubble of stuff-doing need to know the strategy – what it is that you’re doing, why, where you’re going with it, etc. The people on the ground with you need the strategy and the tactics, because else they won’t know how to do the stuff. But the outside people don’t really need the tactics at all. Don’t bother with the how unless your audience needs it. They probably don’t. It might make you feel better about yourself, but it’s much more likely that Bob and Jane are thinking about how long this meeting has gone on for already than how personally impressive and definitely-not-an-idiot you are for knowing how you’re going to do some work. Feeling marginally better about yourself (but, let’s face it, still insecure as heck) is not worth the cost, which in this case is the alienation of your audience. 2. Talking for too long about stuff This is kinda the same problem as the previous problem, only much less specific, and I’ve more or less covered why it’s bad already. Basic motivation: to make people think you’re not an idiot. What you do: talk for a very long time about what you’re doing so as to make it sound like you know what you’re doing and lots about it. What your audience wants: the shortest meaningful update. Some of this is a kill your darlings problem – the stuff you’re doing that seems really nifty to you seems really nifty to you, and thus you want to share it with everyone to show that you’re a smart person who thinks up nifty things to do. The downside to this is that it’s mostly only interesting to you – if other people don’t need to know, they likely also don’t care. Think about how you feel when someone is talking a lot to you about a lot of stuff that they’re doing which is at best tangentially interesting and/or relevant. You’re probably not thinking that they’re really smart and clearly know what they’re doing (unless they’re talking a lot and being really engaging about it, which is not the same as talking a lot). You’re probably thinking about something totally unrelated to the thing they’re talking about. Or the fact that you’re bored. You might even – and this is the opposite of what they’re hoping to achieve by talking a lot about stuff – be thinking they’re kind of an idiot. There’s another huge advantage to paring down what you’re trying to say to the barest possible points – it clarifies your thinking. The lightning talk format, as well as other formats which limit the time and/or number of slides you have to say a thing, are really good for doing this. It’s incredibly likely that your audience in this case (the people who need to know some things about your thing but not all the things about your thing) will get everything they need to know from five minutes of you talking about it, especially if trying to condense ALL THE THINGS into a five-minute talk has helped you get clear in your own mind what you’re doing, what you’re trying to say about what you’re doing and why you’re doing it. The bonus of this is that by being clear in your thoughts and in what you say, and in not taking up lots of people’s time to tell them stuff they don’t really need to know, you actually come across as much, much smarter than the person who talks for half an hour or more about things that are semi-relevant at best. 3. Waiting until you’ve got every detail sorted before announcing a big change to the people affected by it This is the worst crime on the list. It’s also human nature. Announcing uncertainty – that something important is going to happen (big reorganisation, product getting canned, etc.) but you’re not quite sure what or when or how yet – is scary. There are risks to it. Uncertainty makes people anxious. It might even paralyse them. You can’t run a business while you’re figuring out what to do if you’ve paralysed everyone with fear over what the future might bring. And you’re scared that they might think you’re not the right person to be in charge of [thing] if you don’t even know what you’re doing with it. Best not to say anything until you know exactly what’s going to happen and you can reassure them all, right? Nope. The people who are going to be affected by whatever it is that you don’t quite know all the details of yet aren’t stupid***. You wouldn’t have hired them if they were. They know something’s up because you’ve got your guilty face on and you keep pulling people into meeting rooms and looking vaguely worried. Here’s the deal: it’s a lot less stressful for everyone (including you) if you’re up front from the beginning. We took this approach during a recent company-wide reorganisation and got really positive feedback. People would much, much rather be told that something is going to happen but you’re not entirely sure what it is yet than have you wait until it’s all fixed up and then fait accompli the heck out of them. They will tell you this themselves if you ask them. And here’s why: by waiting until you know exactly what’s going on to communicate, you remove any agency that the people that the thing is going to happen to might otherwise have had. I know you’re scared that they might get scared – and that’s natural and kind of admirable – but it’s also patronising and infantilising. Ask someone whether they’d rather work on a project which has an openly uncertain future from the beginning, or one where everything’s great until it gets shut down with no forewarning, and very few people are going to tell you they’d prefer the latter. Uncertainty is humanising. It’s you admitting that you don’t have all the answers, which is great, because no one does. It allows you to be consultative – you can actually ask other people what they think and how they feel and what they’d like to do and what they think you should do, and they’ll thank you for it and feel listened to and respected as people and colleagues. Which is a really good reason to start talking to them about what’s going on as soon as you know something’s going on yourself. All of the above assumes you actually care about talking to the people who work with you and for you, and that you’d like to do the right thing by them. If that’s not the case, you can cheerfully disregard the advice here, but if it is, you might want to think about the ways above – and the inevitable countless other ways – that making internal communication about you and not about your audience could actually be doing the people you’re trying to communicate with a huge disservice. So take a deep breath and talk. For five minutes or so. About the important things. Not the other things. As soon as you possibly can. And you’ll be fine.   *Of course you do. You’re good at your job. Don’t worry. **This might not always be true, but it is most of the time. Other people who need to know the how will either be people who you’ve already identified as needing-to-know and thus part of the same set as the people in you’re area you’ve already discussed this with, or else they’ll ask you. But don’t bring this stuff up unless someone asks for it, because most of the people in the audience really don’t care and you’re wasting their time. ***I mean, they might be. But let’s give them the benefit of the doubt and assume they’re not.

    Read the article

  • Master Data Management – A Foundation for Big Data Analysis

    - by Manouj Tahiliani
    While Master Data Management has crossed the proverbial chasm and is on its way to becoming mainstream, businesses are being hammered by a new megatrend called Big Data. Big Data is characterized by massive volumes, its high frequency, the variety of less structured data sources such as email, sensors, smart meters, social networks, and Weblogs, and the need to analyze vast amounts of data to determine value to improve upon management decisions. Businesses that have embraced MDM to get a single, enriched and unified view of Master data by resolving semantic discrepancies and augmenting the explicit master data information from within the enterprise with implicit data from outside the enterprise like social profiles will have a leg up in embracing Big Data solutions. This is especially true for large and medium-sized businesses in industries like Retail, Communications, Financial Services, etc that would find it very challenging to get comprehensive analytical coverage and derive long-term success without resolving the limitations of the heterogeneous topology that leads to disparate, fragmented and incomplete master data. For analytical success from Big Data or in other words ROI from Big Data Investments, businesses need to acquire, organize and analyze the deluge of data to make better decisions. There will need to be a coexistence of structured and unstructured data and to maintain a tight link between the two to extract maximum insights. MDM is the catalyst that helps maintain that tight linkage by providing an understanding about the identity, characteristics of Persons, Companies, Products, Suppliers, etc. associated with the Big Data and thereby help accelerate ROI. In my next post I will discuss about patterns for co-existing Big Data Solutions and MDM. Feel free to provide comments and thoughts on above as well as Integration or Architectural patterns.

    Read the article

  • Is it wise for a programmer to move into management?

    - by Desolate Planet
    Many times, a developer has suggested that I become a team leader because I'm motivated, but during my career in the IT industry, I've seen so many people who are great at programming, move into management and they are miserable. I've also seen many managers return to programming stating "I'm a technical person, I like technical problems". If this is such a common thing, why do developers feel compelled to leave the technical domain and move into management? Sure you'll have more money and more control, but if you don't enjoy your work and take your problems out on your tream. Secondly, I've been asked in developer interviews, "Would you consider leading a team?" and I'm always tempted to cite the Peter Principle based on what I've seen. I am interested in furthering myself, but not in the way the company may want i.e "Vice President of department blah". To be honest, I've seen this more often in the corporate world than in small development houses and it's always put me off ever going back to a corporate environment. I just feel that this is becoming more and more the norm and it's impacting team morale and degrading the quality of the work. Question: Based on what I've said, Is it a smart move for a technical person to move into management?

    Read the article

  • Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

    - by ubunsteve
    I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

    Read the article

  • What's the proper term for a function inverse to a constructor? Deconstructor, destructor, or something else?

    - by Petr Pudlák
    Edit: I'm rephrasing the question a bit. Apparently I caused some confusion because I didn't realize that the term destructor is used in OOP for something quite different - it's a function invoked when an object is being destroyed. In functional programming we (try to) avoid mutable state so there is no such equivalent to it. (I added the proper tag to the question.) Instead, I've seen that the record field for unwrapping a value (especially for single-valued data types such as newtypes) is sometimes called destructor or perhaps deconstructor. For example, let's have (in Haskell): newtype Wrap = Wrap { unwrap :: Int } Here Wrap is the constructor and unwrap is what? I've seen both, for example: ... Most often, one supplies smart constructors and destructors for these to ease working with them. ... at Haskell wiki, or ... The general theme here is to fuse constructor - deconstructor pairs like ... at Haskell wikibook (here it's probably meant in a bit more general sense). The questions are: How do we call unwrap in functional programming? Deconstructor? Destructor? Or by some other term? And to clarify, is this terminology applicable to other functional languages, or is it used just in the Has

    Read the article

  • How can I get cross-browser consistent behavior for TR heights within a table with a set height? [migrated]

    - by Dan
    I have an arbitrary number of tables with an arbitrary number of rows in each, and all tables are the same height. My initial approach was to just set the overall height of the table and hope the rows were smart enough to distribute themselves appropriately. That's not the case. I have 4 different behaviors going on with 4 browsers, but I need them to all render at the very least in a similar way. Safari & Chrome (WebKit): All rows are equal height, creating scroll bars as needed and fitting within table height. Firefox: All rows are the height necessary to fit their content, with the remaining rows overflowing out of the table. Additionally, If the content of the rows does not take up all of the height, only the part of the table with content in it takes the background (though it seems, through use of Firebug, that the actual table [and TR] extend to the bottom of the proper table height). IE: All rows are the height necessary to fit their content, with the remaining rows overflowing out of the table. Obviously this only includes one version of each browser and additional variation would likely appear with more being tested. Ideally, a solution where the browser renders TRs with less content smaller than those with larger content, while still using scrolling within the variable height TRs when the overall height of the table is not enough would be optimum. I could potentially see a solution to achieve that with JS, but can it be done with CSS? Or, if not, can the behavior that WebKit displays be made to work across the browsers? Thanks! PS: Example can be found here.

    Read the article

  • Unable to mount an LVM Hard-drive after upgrade

    - by Bruce Staples
    I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

    Read the article

  • Freescale One Box Unboxing (then installing Java SE Embedded technology)

    - by hinkmond
    So, I get a FedEx delivery the other day... "What cool device could be inside this FedEx Overnight Express Large Box?" I was wondering... Could it be a new Linux/ARM target device board, faster than a Raspberry Pi and better than a BeagleBone Black??? Why, yes! Yes, it was a Linux/ARM target device board, faster than anything around! It was a Freescale i.MX6 Sabre Smart Device Board (SDB)! Cool... Quad Core ARM Cortex A9 1GHz with 1GB of RAM. So, cool... I installed the Freescale One Box OpenWRT Linux image onto its SD card and booted it up into Linux. But, wait! One thing was missing... What was it? What could be missing? Why, it had no Java SE Embedded installed on it yet, of course! So, I went to the JDK 7u45 download link. Clicked on "Accept License Agreement", and clicked on "jdk-7u45-linux-arm-vfp-sflt.tar.gz", installed the bad boy, and all was good. Java SE Embedded 7u45 on a Freescale One Box. Nice... Hinkmond

    Read the article

  • Three New Videos on Social Development

    - by Bob Rhubart
    By now it should be clear to even the most tenacious Luddite that the social media phenomenon is no mere fad. Those ubiquitous icons for Facebook and Twitter and other social networks are little beacons of disruptive change signalling yet again that the 20th century is over, dude. And that presents an opportunity for software developers with the necessary insight and expertise to tap into and expand social platforms for forward-thinking organizations. If you're a developer and you're interested in exploiting these emerging opportunities you'll want to check out three new videos that focus on software development for social platforms. Developing with Facebook: An Introduction to Social Design James Pearce, Facebook's head of Mobile Developer Relations, provides an overview of the Facebook platform and the underlying APIs that are available to the developer community. Building on the LinkedIn Platform: Content Amplified Adam Trachtenberg, Director of LinkedIn's Developer Network, discusses how you can make it simple for a professional audience to discover and distribute your content on LinkedIn. Emergence of the Social Enterprise Roland Smart, Oracle's VP of Social Marketing, shares Oracle’s vision for the social-enabled enterprise and highlights the role developers will play in the next phase of enterprise development. OTN has also created the Oracle Social Developer Community, a new Facebook page devoted to the promotion of community conversation and resources to support Social Developers. If you're working on a social development project, visit the page and tell us about it.

    Read the article

  • Ubuntu 12.04 Frequent Kernel Panics

    - by Jordan Johns
    Dealing with what seems to be quantum behavior here. I'm having frequent Kernel panics and the problem is very hard to locate. To cut to the chase of what is going on I am essentially getting this screen: This occurs always after login (login screen is fine, can go into my TTY's and everything). But once I log in I have anywhere from 0 (instant) to 10 seconds before everything grinds to a halt and freezes. The only way I found out that it was a kernel panic was going into a TTY while it happens. At first, I figured something must be wrong with memory. Ran memtest86, full standard test. No errors. OK. CPU problem? Windows works fine, ran prime95 and a bunch of other torture tests for many hours. Drive problem? Nope. fsck reports no problems and the smart status is ok. Overclocking problem? Nope. Windows is working fine, and I also reset the bios to prove the point it was not the cause. At a loss here, even trying to reinstall the thing it gives me the same problem even attempting to install ubuntu (like right after you try to select "install ubuntu" or "try ubuntu first before installing"). Anyone have any thoughts? Its very bizarre, its as if my system hates linux and is trying to tell me not to use it (that would be a terrible reality). Thanks!

    Read the article

  • Extremely simple online multiplayer game

    - by Postscripter
    I am considering creating a simple multiplayer game, which focuses on physics and can accommodate up to 30 players per session. Very simple graphics, but smart physics (pushing, weight and gravity, balance) is required. After some research I found a good java script (framework ??) called box2d.js I found the demo to be excellent. this is is kind of physics am looking for in my game. Now, what other frameworks will I need? Node.js?? Prototype.js?? (btw, I found the latest versoin of protoype.js to be released in 2010...?? is this still supported? Should I avoid using it?) What bout HTML 5 and Canvas? would I need them? websockets? Am a beginner in web programming + game programming world. but I will learn fast, am computer science graduate. (but no much web expeience but know essentionals javascript, html, css..). I just need a guiding path to build my game. Thanks

    Read the article

  • How to combat negative SEO?

    - by Perturbed
    Someone has decided to create a hate blog on a hosted blogging service (wordpress.com) that bashes my company. The blog contains posts that completely flame myself, my service, and contains complete falsehoods about how I run my business. Without going into details, I'm pretty sure the author of this blog is an owner of a competing service (although it is authored completely anonymously). Frankly, I'm not sure if the content would qualify for defamation or not, but I really don't like the idea of spending money on a lawyer to even attempt to prove this. I also have no interest in retorting or even replying to the blog in any sort of way -- I feel this would justify the ludicrous claims that have been posted. Unfortunately, whoever wrote the blog was pretty smart about using key words that people commonly use to search for my service. Because my customer base is relatively small and local, our PageRank is not incredibly high. As a result, when someone Google's our business name, this blog is usually within the top five results (thankfully, it's never above the business' actual website, but it's usually within eyeshot). It's incredibly frustrating to hear from customers who have seen the link (luckily, most of the time they think the author is crazy). Is there anything I can do to combat this? Would it be worthwhile to setup my own hosted wordpress.com branded blog, in an effort to trump this wordpress.com with a blog that is more active of my own? TL;DR: Someone made a hate blog using wordpress.com and is now on the first page of my business' search results. What are my options?

    Read the article

  • How to sell logistical procedures that require less time to perform but more finesse?

    - by foampile
    I am working with a group where part of the responsibilities is managing a certain set of configuration files which, of course, have the same skeleton/structure across different environments but different values (like server, user, this setting, that setting etc.). Pretty classic scenario... The problem is that everyone just goes and modifies final, environment-specific files and basically repeats the work for every environment. Personally, I am offended to have to peform repeatable, mundane tasks in this day and age when we have technologies to automate it all. So I devised a very simple procedure of abstracting the files into templates, stubbing env-specific values with parameters and then wrote a simple Perl script that, given a template and an environment matrix with env-specific values for each param, produces the final file. So this is nothing special, cutting-edge or revolutionary -- I am pretty sure that 20 years ago efficient places did their CM like that. However, that requires that changes are made at the template level and then distributed across different environments using the script and not making changes in the final environment-specific files. This is where I am encountering resentment as they feel "comfortable" doing it their old, manual, repeated labor way. Personally, I don't have a problem with them working hard rather than smart but the problem is when I have to build on top of someone else's changes, I have to merge their changes into my template from a specific file, which takes time and is grueling. So my question is how to go about selling my method, which makes it so much faster in an environment that is resentful to change and where most things have to be done at the level of the least competent team member?

    Read the article

  • Visual Studio 2012 first impressions...no Macros!

    - by bconlon
    Yesterday I installed Microsoft Visual Studio 2012 for the first time (all 8.5GB) and after 20 years of (mostly) happy times using VS they have removed Macros, one of the most handy features.The first thing I wanted to do when I upgraded my VS2010 project was to add a #elseif block to each file. This would usually be simple case of find in files of the previous #elseif and then Ctrl+Shift+R to record a macro which would be: F8 (to select the next file from find list), F3 (to find the correct position in file), Ctrl+V to paste the new code. Then all I would need to do is keep Ctrl+Shift+P (Play Macro) pressed until all the files were processed.But alas Ctrl+Shift+R does nothing! I won’t say that I use Macros every day but it was a very useful feature.To continue my moaning a little more, I also don't like the bland interface. This has been well documented by others, but now I have used it myself, I find it difficult to tell one grey area of screen from another and the lack of colour makes the icons unclear.I also don't see why the menus now need to SHOUT in capital letters?On the plus side, they have now added the ability to see WPF properties in the debugger...a bit of an oversight in Visual Studio 2010. Oh, but you still can't edit and continue on files that contain templated code.Whilst Visual Studio 2012 is not a complete disaster like Windows 8 (why develop a desk top OS to be the same as a Smart device OS), it does not float my boat.Rant over.#

    Read the article

  • Session Evaluations

    - by BuckWoody
    I do a lot of public speaking. I write, teach, present and communicate at many levels. I love to do those things. And I love to get better at them. And one of the ways you get better at something is to get feedback on how you did. That being said, I have to confess that I really despise the “evaluations” I get at most venues. From college to technical events to other locations, at Microsoft and points in between, I find these things to be just shy of damaging, and most certainly useless. And it’s not always your fault. Ouch. That seems harsh. But let me ask you one question – and be as honest as you can with the answer – think about it first: “What is the point of a session evaluation?” I’m not saying there isn’t one. In fact, I think there’s a really important reason for them. In my mind, it’s really this: To make the speaker / next session better. Now, if you look at that, you can see right away that most session evals don’t accomplish this goal – not even a little. No, the way that they are worded and the way you (and I) fill them out, it’s more like the implied goal is this: Tell us how you liked this speaker / session. The current ones are for you, not for the speaker or the next person. It’s a popularity contest. Don’t get me wrong. I want to you have a good time. I want you to learn. I want (desperately, oh, please oh please) for you to like me. But in fact, that’s probably not why you went to the session / took the class / read that post. No, you want to learn, and to learn for a particular reason. Remember, I’m talking about college classes, sessions and other class environments here, not a general public event. Most – OK, all – session evaluations make you answer the second goal, not the first. Let’s see how: First, they don’t ask you why you’re there. They don’t ask you if you’re even qualified to evaluate the session or speaker. They don’t ask you how to make it better or keep it great. They use odd numeric scales that are meaningless. For instance, can someone really tell me the difference between a 100-level session and a 200-level one? Between a 400-level and a 500? Is it “internals” (whatever that means) or detail, or length or code, or what? I once heard a great description: A 100-level session makes me say, “wow - I’m smart.” A 500-level session makes me say “wow – that presenter is smart.” And just what is the difference between a 6 and a 7 answer on this question: How well did the speaker know the material? 1  2  3  4  5  6  7  8  9  10 Oh. My. Gosh. How does that make the next session better, or the speaker? And what criteria did you use to answer? And is a “10” better than a “1” (not always clear, and various cultures answer this differently). When it’s all said and done, a speaker basically finds out one thing from the current session evals: “They liked me. They really really liked me.” Or, “Wow. I think I may need to schedule some counseling for the depression I’m about to go into.” You may not think that’s what the speaker hears, but trust me, they do. Those are the only two reactions to the current feedback sheets they get. Either they keep doing what they are doing, or they get their feelings hurt. They just can’t use the information provided to do better. Sorry, but there it is. Keep in mind I do want your feedback. I want to get better. I want you to get your money and time’s worth, probably as much as any speaker alive. But I want those evaluations to be accurate, specific and actionable. I want to know if you had a good time, sure, but I also want to know if I did the right things, and if not, if I can do something different or better. And so, for your consideration, here is the evaluation form I would LOVE for you to use. Feel free to copy it and mail it to me any time. I’m going to put some questions here, and then I’ll even include why they are there. Notice that the form asks you a subjective question right away, and then makes you explain why. That’s work on your part. Notice also that it separates the room and the coffee and the lights and the LiveMeeting from the presenter. So many presenters are faced with circumstances beyond their control, and yet are rated high or low personally on those things. This form helps tease those apart. It’s not numeric. Numbers are easier for the scoring committees but are useless for you and me. So I don’t have any numbers. We’re actually going to have to read these things, not put them in a machine. Hey, if you put in the work to write stuff down, the least we could do is take the time to read it. It’s not anonymous. If you’ve got something to say, say it, and own up to it. People are not “more honest” when they are anonymous, they are less honest. So put your name on it. In fact – this is radical – I posit that these evaluations should be publicly available. Forever. Just like replies to a blog post. Hey, if I’m an organizer, I would LOVE to be able to have access to specific, actionable information on the attendees and the speakers. So if you want mine to be public, go for it. I’ll take the good and the bad. Enjoy. ------------------------------------------------------------------------------------------------------------------------------------------- Session Evaluation – Date, Time, Location, Topic Thanks for giving us your time today. We know that’s valuable, and we hope you learned something you can use from the session. If you can answer these questions as completely as you can, it will help the next person who attends a session here. Your Name: What you do for a living: (We Need your background to evaluate your evaluation) How long you have been doing that: (Again, we need your background to evaluate your evaluation) Paste Session Description Here: (This is what I said I would talk about) Did you like the session?                     No        Meh        Yes (General subjective question – overall “feeling”. You’ll tell us why in a minute.)  Tell us about the venue. Temperature, lights, coffee, or the online sound, performance, anything other than the speaker and the material. (Helps the logistics to be better or as good for the next person) 1. What did you expect to learn in this session? (How did you interpret that extract – did you have expectations that I should work towards for the next person?) 2. Did you learn what you expected to learn? Why? Be very specific. (This is the most important question there is. It tells us how to make the session better for someone like you.) 3. If you were giving this presentation, would you have done anything differently? What? (Helps us to gauge you, the listener, and might give us a great idea on how to do something better. Thanks!) 4. What will you do with the information you got? (Every presenter wants you to learn, and learn something useful. This will help us do that as well or better)  

    Read the article

  • What's the proper term for a function inverse to a constructor - to unwrap a value from a data type?

    - by Petr Pudlák
    Edit: I'm rephrasing the question a bit. Apparently I caused some confusion because I didn't realize that the term destructor is used in OOP for something quite different - it's a function invoked when an object is being destroyed. In functional programming we (try to) avoid mutable state so there is no such equivalent to it. (I added the proper tag to the question.) Instead, I've seen that the record field for unwrapping a value (especially for single-valued data types such as newtypes) is sometimes called destructor or perhaps deconstructor. For example, let's have (in Haskell): newtype Wrap = Wrap { unwrap :: Int } Here Wrap is the constructor and unwrap is what? The questions are: How do we call unwrap in functional programming? Deconstructor? Destructor? Or by some other term? And to clarify, is this/other terminology applicable to other functional languages, or is it used just in the Haskell? Perhaps also, is there any terminology for this in general, in non-functional languages? I've seen both terms, for example: ... Most often, one supplies smart constructors and destructors for these to ease working with them. ... at Haskell wiki, or ... The general theme here is to fuse constructor - deconstructor pairs like ... at Haskell wikibook (here it's probably meant in a bit more general sense), or newtype DList a = DL { unDL :: [a] -> [a] } The unDL function is our deconstructor, which removes the DL constructor. ... in The Real World Haskell.

    Read the article

  • Is my project a web site or a mobile app?

    - by Evik James
    I am a web developer. I have been developing web sites professionally for 15+ years using ColdFusion, SQL Server, and jQuery. I am doing a project for a client that uses the above technologies. The site has a mobile facet too. For that, I am using jQuery Mobile. The site enables retail store personnel to gather a store customer's preferences using any smart phone or tablet. The store personnel just needs to access a special link via a QR code and a login. Anyone can easily access the site from a PC's browser, too. Some sources suggest that mobile apps must be downloaded and installed using a third party, such as from Google, Amazon, or Apple. Others sources suggest that any information designed for use on mobile device is a mobile app. Regarding the site that is specifically designed for use by mobile devices that extensively uses jQuery Mobile, is this a "web site" or a "mobile app"? What is the "proper" description for this type of site? My customer insists that it is one and not the other. I insist that it is the other and not the one. Can you help me clarify this?

    Read the article

  • Gmail Now Supports Google Drive Integration; Share Files Up to 10GB

    - by Jason Fitzpatrick
    Gmail users can now easily send large files thanks to Google Drive’s increased integration with Gmail–blow through the 25MB in-email attachment limit and share files up to 10GB. From the official Gmail announcement: Have you ever tried to attach a file to an email only to find out it’s too large to send? Now with Drive, you can insert filesup to 10GB – 400 times larger than what you can send as a traditional attachment. Also, because you’re sending a file stored in the cloud, all your recipients will have access to the same, most-up-to-date version.  Like a smart assistant, Gmail will also double-check that your recipients all have access to any files you’re sending. This works like Gmail’s forgotten attachment detector: whenever you send a file from Drive that isn’t shared with everyone, you’ll be prompted with the option to change the file’s sharing settings without leaving your email. It’ll even work with Drive links pasted directly into emails.  The new Gmail/Drive integration is rolling out in waves to users over the next few days and is accessible via the new Gmail compose window. How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

    Read the article

  • Fastest way to parse big json android

    - by jem88
    I've a doubt that doesn't let me sleep! :D I'm currently working with big json files, with many levels. I parse these object using the 'default' android way, so I read the response with a ByteArrayOutputStream, get a string and create a JSONObject from the string. All fine here. Now, I've to parse the content of the json to get the objects of my interest, and I really can't find a better way that parse it manually, like this: String status = jsonObject.getString("status"); Boolean isLogged = jsonObject.getBoolean("is_logged"); ArrayList<Genre> genresList = new ArrayList<Genre>(); // Get jsonObject with genres JSONObject jObjGenres = jsonObject.getJSONObject("genres"); // Instantiate an iterator on jsonObject keys Iterator<?> keys = jObjGenres.keys(); // Iterate on keys while( keys.hasNext() ) { String key = (String) keys.next(); JSONObject jObjGenre = jObjGenres.getJSONObject(key); // Create genre object Genre genre = new Genre( jObjGenre.getInt("id_genre"), jObjGenre.getString("string"), jObjGenre.getString("icon") ); genresList.add(genre); } // Get languages list JSONObject jObjLanguages = jsonObject.getJSONObject("languages"); Iterator jLangKey = jObjLanguages.keys(); List<Language> langList = new ArrayList<Language>(); while (jLangKey.hasNext()) { // Iterate on jlangKey obj String key = (String) jLangKey.next(); JSONObject jCurrentLang = (JSONObject) jObjLanguages.get(key); Language lang = new Language( jCurrentLang.getString("id_lang"), jCurrentLang.getString("name"), jCurrentLang.getString("code"), jCurrentLang.getString("active").equals("1") ); langList.add(lang); } I think this is really ugly, frustrating, timewaster, and fragile. I've seen parser like json-smart and Gson... but seems difficult to parse a json with many levels, and get the objects! But I guess that must be a better way... Any idea? Every suggestion will be really appreciated. Thanks in advance!

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >