Search Results

Search found 9285 results on 372 pages for 'disk imaging'.

Page 54/372 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61 | Next Page >

Does a 3ware "ECC-ERROR" matter on a JBOD when I have ZFS?

- by Stefan Lasiewski

I have a FreeBSD 8.x machine running ZFS and with a 3ware 9690SA controller. The 3ware controller shows an ECC-ERROR with one of the disks: //host> /c0 show VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 279.39 GB SAS 0 - SEAGATE ST3300657SS p1 OK u0 279.39 GB SAS 1 - SEAGATE ST3300657SS p2 OK u1 931.51 GB SAS 2 - SEAGATE ST31000640SS p3 ECC-ERROR u2 931.51 GB SAS 3 - SEAGATE ST31000640SS p4 OK u3 931.51 GB SAS 4 - SEAGATE ST31000640SS /c0 show events shows no ECC errors in it's recent history. ZFS does not currently detect any errors. zpool status says No known data errors My question: Is this ECC-ERROR something that I need to be concerned about? According to the 3ware CLI 9.5.2 Manual, an ECC-ERROR means that the 3ware controller caught a read-error for one or more sectors on this drive. This sometimes occurs when a RAID array is recovering from a failed disk. I believe that ECC-ERRORS can also be detected when the 3ware Controller verifies each disk. None of the drives have failed and thus there was no drive rebuild, so I assume that 3ware discovered a bad sector when it ran it's weekly auto-verify scan of the disks. Is this a safe assumption? According to our logs, ZFS has not detected any bad sectors on this drive. ZFS can work around read errors -- if ZFS detects a bad sector on the drive, it will simply mark that sector as bad and never use it again. From the ZFS perspective one bad sector isn't a big deal, although it might indicate that the drive is starting to go bad.

Read the article
How to configure VirtualBox server for performance at home

- by BluJai

I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

Read the article
How to configure VirtualBox server for performance at home

- by BluJai

I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

Read the article
Cannot access drive in Windows 7 after scandisk lockup, but can in safe mode....

- by Matt Thompson

I ran scandisk on my external USB drive due to the inability to delete a few files. Windows asked me if I wanted to unmount the drive before the scan, warning me that it would be unusable until the scan was finished, and I said yes. During the scan, my machine locked up, and I was forced to reboot the machine. When it came up, I was unable to access the drive, getting an error that "L:is not accessible, access is denied". Comupter Management sees the drive, and has the proper amount of disk space filled. I booted into safe mode, and can access the drive with no problems, and I noticed that in explorer, all the folders have locks on them. I booted back into windows, but still could not access the drive, getting the same error as above. Hovever, if I right click on the drive, select properties, and go to Customize, in the folder pictures ares, I select Choose File, and a window open up, that shows the root of the directory, with all the folder able to be accessed, but again, the icon is the folder icon with a lock on it. I can even copy files from the drive to another. So, the files are not gone, windows can obviously access the drive no matter what it thinks, so there has to be a problem with the flag windows put on the drive when it ran the original scan that failed. I was able to run a scan both in safe mode with no problems, and in windows. In windows, I received the cannot access error the first time I run scan disk on it, but if I try again, it works fine. Any ideas on how to clear the flag that windows set, so I can access the drive normally again?

Read the article
PC only boots from Linux-based media and won't boot from DOS-based media

- by Xolstice

I have this problem where the PC only seems to boot from a floppy disk or CD if it was created as a Linux-based bootable media. If it was created as a DOS-based bootable media the system just freezes at the starting point of the boot process. I originally asked this under question 139515 for CD booting only, and based on the given answers, I was under the impression the problem was with the CD-ROM drive; however, I have since installed a newly purchased CD-ROM drive and the same freezing occurs. This then made me try the DOS bootable floppy disk approach and I was quite surprised that it exhibited the same freezing problem. I then tried try a Linux bootable floppy and everything booted from it without any issues. As I mentioned in my original question, the PC was booting just fine from the DOS-based bootable CD, and then it suddenly decides to pull this freezing stunt. I can't remember if I changed anything in the BIOS settings that may I have caused the problem, but I am wondering if that could be the case - it is currently using the Award Module BIOS v4.60PGMA. Can anyone help?

Read the article
Quota, AD and C#

- by Gnial0id

At first, my mother tongue is not English, so I apologize for the possible mistakes. I'm working on a WS2008R2 server with an Active Directory and a web platform manages this AD with C# code. A group of users have to be able to create user accounts but during the procedure, a disk quota for this new account is (and have to be) created. As the "creator" must not be a member of the Administrators group, the access to the c/: disk is denied. So, I want to perform the File Server Resource Manager operations with C# code by an non-admin account. The code is correct, it works normally with admin account. So, the problem turns around the permissions on the hard drive. I've looked after help on the Internet, without success. It seems that quota delegation is impossible. Only admin can perform this. A colleague helped me a bit, and found the GPO "By pass traverse checking" on a forum but it doesn't seems to be the good way. Any help would be appreciate.

Read the article
Copy all installed programs & files in a hard disk (which has 32 bit Windows 7) and clone/transfer it to another computer which has 64 bit Windows 7

- by galacticninja

I recently got a new PC which has a 64-bit Windows 7 installed. The current PC that I am using has a 32-bit Windows 7 installed. I would like to know if there is a software that can copy all my installed programs and files in the hard disk with the 32-bit Windows 7 PC and transfer it to the newer PC's hard disk which has a 64 bit version of Windows 7. This is essentially like "cloning" a hard disk but I would like to use a 64-bit OS in the target drive, instead of also using the 32-bit OS of the source drive. I would like to do this I can avoid reinstalling and reconfiguring my installed programs and files again on the new PC. If possible, I would like the new PC to work as it was in my previous PC, with the installed programs, configuration and files intact except that the OS is now 64-bit and the hard disk has a larger capacity. I have heard of programs that can clone a hard disk, but my concern is that the 32-bit Windows 7 OS will also be cloned to the new 64-bit PC. If it is not possible to transfer my installed programs and settings like the way I described, are there software that can make it easier to migrate my installed programs, their configurations and my files from a 32-bit Windows 7 PC to a 64-bit Windows 7 PC? Details: I have a SATA to USB connector/adapter to copy files in the current hard disk to the newer one. The two PCs are connected through LAN, so I can also transfer files through LAN. Both PCs only have one hard disk.

Read the article
Dell PowerEdge T710, add a new hard disk, how to?

- by user1340802

I need to add a new hard disk to a PowerEdge T710 running on Vmware EXSI 4. this hard disk is a 'normal' desktop hard disk 1TB (that is it is not coming from Dell, I also have no rack for it to plug it inside any of the front bay) I would like to add this disk for a virtual machine needing space, the most easily as possible. I have find that there is an avaiable sata cable with its electric power, so may I just add the disk plugging these and using the empty 5"1/4 slot available under the CD drive (with a 5"1/4 - 3"1/2 bay adaptater) ? (even if this way it seems that i bypass the raid controller that own the front bay with racks)) that way i think could be easier than adding the disk to the already defined Raid (btw i am also not sure on how to do these but i would not risk to mess the already working things) what are the other operations that i would have to do to ? (sorry I am a real beginner on Vmware EXSI and PowerEdge management :/ i have seen that there is some management from Bios (CTRL+R as start up) so that the disk will be seen or initialize it. I am really not sure of the steps needed...) thank you, best.

Read the article
HD working with IDE USB adapter but not recognised by bios

- by Rajeeva

I have a Windows XP Pentium III desktop with two hard drives. The first one has the OS and is luckily working. The second drive on the secondary master IDE channel few days back was unable to read some files and since then for some time it was failing and reviving intermittently and now it is always showing as failed on the IDE channel When the HD was intermittenly failing, I was able to copy some data from it to the other drive - also during that time if the system was running and the hard disk failed at that time, the system froze and then i had to reboot. then I got a new 80 gb hdd similar (same make - seagate barracuda) to the earlier failing one, a new data cable for the drive and an IDE to USB adapter. the new hard drive i installed in the previous drive's place (secondary master), formatted it and it worked for 1 day and then it also failed - simultaneously i connected the old hd to the IDE/USB adapter and i could view all the data - some of that data i was able to back up from the old hd to the new hd before the new hd failed the new hd i have tried connecting on the primary channel as the slave disk but when i do that then the bios does not detect either the OS drive or the new drive and the system does not boot surprisingly, the older (previously failed) hd and the new hd are both working fine on the usb channel with the IDE/USB adapter. i have ruled out any problem with the secondary channel since the dvd rom i was earlier using as primary slave have now connected to secondary master and it works fine. i am really confused by this behavior on my system. please can anybody try to solve this for me. thanks.

Read the article
750Gig Hard Drive shows full with only 315Gigs used

- by Chris Kelly

I have a Win7 laptop with a 750Gig C: drive. It came partitioned with 714Gig usable from manufacturer. I installed programs, music files, etc up to 285 gigs. As of a few weeks ago it showed 285 Gigs. Two weeks of house guests later and it shows HD is full. I deleted some files but it still shows 652 Gigs on this drive while there are only 285 Gigs on drive. Relevant details: I am Administrator on laptop and have fair knowledge of what I am doing. I did not restore from backup, restore from mirror, upgrade HD's or anything else that would have touched the partition structure. Just daily use as imaging machine and web. I have checked partitions under disk administrator - no change, still partitioned with 714Gigs usable. Have looked through computer C drive by hand showing Hidden files and folders - no change. I have used JDisk Report to double check - it shows I have only 285 Gigs on C drive. I triple checked with TreeSize run as Administrator and it also shows 285 Gigs on C drive - yet Windows 7 still shows almost full. I used Windows 7 Utilities to Check for Disk Errors, and Defragged the drive. No errors shown and no change after Defrag.

Read the article
mysql disk io keeps increasing ... is that normal?

- by trustfundbaby

So I've been trying to figure out this disk IO problem I have been having with my linode VPS. Over the last day or two I've just left watch -n1 pidstat -d running in a console window and the output looks like this: Monitoring it over the last few days, I've noticed that my problem lies with the init, searchd, and mysql processes. Searchd is sphinx and all its indexes are on disk, so disk io there is inevitable (apparently). What I can't understand is why the disk reads (kB_rd/s) for mysql refuse to stabilize and just keep going up. It started out at 154 yesterday and is up to what you see in that screen shot. but disk writes (kB_wr/s) have remained pretty constant the entire time. My VPS only has 768MB RAM, my mysql db has a size of about 220MB and after running mysqltuner.pl and reading a bit about it, I've been advised to set my innodb_buffer_pool_size to 220MB but I simply cannot afford to do that ... I have it up to 150MB. My question is twofold. Why does the init process have that much disk reading to do? Why is mysql doing so much disk reading?

Read the article
how can I fix error: hd0 out of disk?

- by rux

I am running Ubuntu 12.04 on a netbook - Acer AS 1410. After a download session, I restarted the computer and it said: error: hd0 out of disk. Press any key to continue... I pressed everything, but it's just frozen there. Any idea what's wrong with it and what I can do to fix it? I haven't been able to run my computer at all since it's frozen like that. Help please! I booted the live cd and ran sudo fdisk -lu into terminal, and here's what it gave me: Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a696263 Device Boot Start End Blocks Id System /dev/sda3 2048 117229567 58613760 5 Extended /dev/sda5 * 71647232 109039615 18696192 83 Linux /dev/sda6 109041664 117229567 4093952 82 Linux swap / Solaris /dev/sda7 4096 71645183 35820544 83 Linux Partition table entries are not in disk order I am somewhat of a beginner in this, so don't know what this means. any ideas? Thanks!

Read the article
Splitting a raidctl mirror safely

- by milkfilk

I have a Sun T5220 server with the onboard LSI card and two disks that were in a RAID 1 mirror. The data is not important right now but we had a failed disk and are trying to understand how to do this for real if we had to recover from a failure. The initial situation looked like this: # raidctl -l c1t0d0 Volume Size Stripe Status Cache RAID Sub Size Level Disk ---------------------------------------------------------------- c1t0d0 136.6G N/A DEGRADED OFF RAID1 0.1.0 136.6G GOOD N/A 136.6G FAILED Green light on the 0.0.0 disk. Find / lights up the 0.1.0 disk. So I know I have a bad drive and which one it is. Server still boots obviously. First, we tried putting a new disk in. This disk came from an unknown source. Format would not see it, cfgadm -al would not see it so raidctl -l would not see it. I figure it's bad. We tried another disk from another spare server: # raidctl -c c1t1d0 c1t0d0 (where t1 is my good disk - 0.1.0) Disk has occupied space. Also the different syntax options don't change anything: # raidctl -C "0.1.0 0.0.0" -r 1 1 Disk has occupied space. # raidctl -C "0.1.0 0.0.0" 1 Disk has occupied space. Ok. Maybe this is because the disk from the spare server had a RAID 1 on it already. Aha, I can see another volume in raidctl: # raidctl -l Controller: 1 Volume:c1t1d0 (this is my server's root mirror) Volume:c1t132d0 (this is the foreign root mirror) Disk: 0.0.0 Disk: 0.1.0 ... No problem. I don't care about the data, I'll just delete the foreign mirror. # raidctl -d c1t132d0 (warning about data deletion but it works) At this point, /usr/bin/ binaries freak out. By that I mean, ls -l /usr/bin/which shows 1.4k but cat /usr/bin/which gives me a newline. Great, I just blew away the binaries (ie: binaries in mem still work)? I bounce the box. It all comes back fine. WTF. Anyway, back to recreating my mirror. # raidctl -l Controller: 1 Volume:c1t1d0 (this is my server's root mirror) Disk: 0.0.0 Disk: 0.1.0 ... Man says that you can delete a mirror and it will split it. Ok, I'll delete the root mirror. # raidctl -d c1t0d0 Array in use. (this might not be the exact error) I googled this and found of course you can't do this (even with -f) while booted off the mirror. Ok. I boot cdrom -s and deleted the volume. Now I have one disk that has a type of "LSI-Logical-Volume" on c1t1d0 (where my data is) and a brand new "Hitachi 146GB" on c1t0d0 (what I'm trying to mirror to): (booted off the CD) # raidctl -c c1t1d0 c1t0d0 (man says it's source destination for mirroring) Illegal Array Layout. # raidctl -C "0.1.0 0.0.0" -r 1 1 (alt syntax per man) Illegal Array Layout. # raidctl -C "0.1.0 0.0.0" 1 (assumes raid1, no help) Illegal Array Layout. Same size disks, same manufacturer but I did delete the volume instead of throwing in a blank disk and waiting for it to resync. Maybe this was a critical error. I tried selecting the type in format for my good disk to be a plain 146gb disk but it resets the partition table which I'm pretty sure would wipe the data (bad if this was production). Am I boned? Anyone have experience with breaking and resyncing a mirror? There's nothing on Google about "Illegal Array Layout" so here's my contrib to the search gods.

Read the article
Change the contrast of Image like Adobe Photoshop in ASP.net C#

- by Hoque

While I was trying to change the brightness and contrast of Image using C#, but I could not get success in changing the contrast of the Image. May I expect any support from here. I am using ColorMatrix to do that. Here are the code that I am using for brightness(works fine) and contrast(does not work properly). public static ColorMatrix CreateBrightnessMatrix(float Brightness) { if (Brightness < -1 || Brightness > 1) throw new ArgumentOutOfRangeException("Brightness value is out of range"); ColorMatrix cm = new ColorMatrix(new float[][]{ new float[] { 1f, 0, 0, 0, 0}, new float[] { 0, 1f, 0, 0, 0}, new float[] { 0, 0, 1f, 0, 0}, new float[] { 0, 0, 0, 1f, 0}, new float[] {Brightness, Brightness, Brightness, 1f, 1f}}); return cm; } public static ColorMatrix CreateContrastMatrix(float Contrast) { if (Contrast < 0 || Contrast > 3) throw new ArgumentOutOfRangeException("Contrast value is out of range"); float Trans = (1f - Contrast) / 2f; ColorMatrix cm = new ColorMatrix(new float[][]{ new float[] {Contrast, 0f, 0f, 0f, 0f}, new float[] { 0f, Contrast, 0f, 0f, 0f}, new float[] { 0f, 0f, Contrast, 0f, 0f}, new float[] { 0f, 0f, 0f, 1f, 0f}, new float[] { Trans, Trans, Trans, 0f, 1f}}); return cm; } Thanks.

Read the article
image segmentation using pil/any package of python

- by sag

hi all., i need to segment an image into regions .i'm using pil.i found no module to segment image in pil. I need this segmented regions as a list or dictionary. Actually i'm trying to compare the images for similarity in content aware fashion.for that i need to segment the image. i tried segwin tool but it is drawing another image(which is not required and also time consuming) thans in advance

Read the article
Fastest image iteration in Python

- by Greg

I am creating a simple green screen app with Python 2.7.4 but am getting quite slow results. I am currently using PIL 1.1.7 to load and iterate the images and saw huge speed-ups changing from the old getpixel() to the newer load() and pixel access object indexing. However the following loop still takes around 2.5 seconds to run for an image of around 720p resolution: def colorclose(Cb_p, Cr_p, Cb_key, Cr_key, tola, tolb): temp = math.sqrt((Cb_key-Cb_p)**2+(Cr_key-Cr_p)**2) if temp < tola: return 0.0 else: if temp < tolb: return (temp-tola)/(tolb-tola) else: return 1.0 .... for x in range(width): for y in range(height): Y, cb, cr = fg_cbcr_list[x, y] mask = colorclose(cb, cr, cb_key, cr_key, tola, tolb) mask = 1 - mask bgr, bgg, bgb = bg_list[x,y] fgr, fgg, fgb = fg_list[x,y] pixels[x,y] = ( (int)(fgr - mask*key_color[0] + mask*bgr), (int)(fgg - mask*key_color[1] + mask*bgg), (int)(fgb - mask*key_color[2] + mask*bgb)) Am I doing anything hugely inefficient here which makes it run so slow? I have seen similar, simpler examples where the loop is replaced by a boolean matrix for instance, but for this case I can't see a way to replace the loop. The pixels[x,y] assignment seems to take the most amount of time but not knowing Python very well I am unsure of a more efficient way to do this. Any help would be appreciated.

Read the article
.NET photo processing component

- by John Williams

Hi folks! I'm looking for a .NET image processing component or an open source alternative to automate the following tasks: Photo capture (webcams and photo cameras) Photo printing (grid/strip modes) Applying photo effects Saving photos AtalaSoft DotImage is quite expensive, any other suggestions are welcome. Thanks J

Read the article
Recover data from hard disk

- by Hitesh Solanki

Hi I have formatted my c: drive and window xp is installed successfully,but I cannot able to access d: drive. when I am trying to double click on the d: drive,following message is displayed: "the disk in drive D: is not formatted, do you want to format it now ? " When I am trying to access from command prompt,the following message is displayed: "The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted." So please help me.... Thanks in advance....

Read the article
sorl-thumbnail unit tests fail by 1 pixel (!)

- by stevejalim

Hi I'm using sorl-thumbnail in a Django 1.2 (currently 1.2 RC) project and getting a surprising failure of four of sorl's built-in unit tests. Essentially, the resized images are all 1px shorter than the unit tests expect them to be. See below for details I'm developing on OSX 10.5.8 (not Snow Leopard) with Python 2.5.1 (r251:54863, Feb 6 2009, 19:02:12) and PIL 1.1.6. Any thoughts what might be up? Cheers Steve ====================================================================== FAIL: test_extension (sorl.thumbnail.tests.fields.FieldTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/fields.py", line 66, in test_extension self.verify_thumbnail((50, 37), thumb, expected_filename) File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/base.py", line 92, in verify_thumbnail self.assertEqual(image.size, expected_size) AssertionError: (50, 38) != (50, 37) ====================================================================== FAIL: test_thumbnail (sorl.thumbnail.tests.fields.ImageWithThumbnailsFieldTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/fields.py", line 111, in test_thumbnail self.verify_thumbnail((50, 37), thumb, expected_filename) File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/base.py", line 92, in verify_thumbnail self.assertEqual(image.size, expected_size) AssertionError: (50, 38) != (50, 37) ====================================================================== FAIL: testTag (sorl.thumbnail.tests.templatetags.ThumbnailTagTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/templatetags.py", line 118, in testTag self.verify_thumbnail((90, 67), expected_filename=expected_fn) File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/base.py", line 92, in verify_thumbnail self.assertEqual(image.size, expected_size) AssertionError: (90, 68) != (90, 67)

Read the article
Any good source of explanatory documentation on ColorMatrix?

- by mackenir

I'd like to try using ColorMatrix, but am only able to find examples that convert an image to grayscale. And even then, they tend to be presented as a chunk of 'magic numbers' code with no explanation. Does anyone know of a 'tutorial' on how to use ColorMatrix? For example I'd be interested in converting a grayscale image to a color image, where white == transparent, and black = a solid color, with gray pixels somewhere in between. Could ColorMatrix do that?

Read the article
How to calculate the average rgb color values of a bitmap

- by Matthias

In my C# (3.5) application I need to get the average color values for the red, green and blue channels of a bitmap. Preferably without using an external library. Can this be done? If so, how? Thanks in advance. Trying to make things a little more precise: Each pixel in the bitmap has a certain RGB color value. I'd like to get the average RGB values for all pixels in the image.

Read the article
Disk-based caching of dynamic images in IIS 7

- by Daniel Schierbeck

I'm writing an image server which needs to handle a relatively large number of concurrent requests (~5,000). The images being served are dynamically scaled down and cropped based on per-image specifications, which are queried from a database. The number of images is rather large, so an in-memory cache isn't viable (thrashing would most definitely occur). I'm using native caching in IIS 7 to avoid hitting the ASP.NET app which generates the images on-the-fly. I've looked around, but I couldn't find a simple way to configure IIS to store the cache on-disk -- is there such an option, or would I need to roll my own? I'd rather avoid placing the generated images in a public folder, so they can be served statically, since I would prefer to invalidate the cache entries using a query parameter (last-edit time from the database,) which doesn't seem possible to reconcile with static caching. I would love to get some feedback on this!

Read the article
Error Converting PIL B&W images to Numpy Arrays

- by Elliot

I am getting weird errors when I try to convert a black and white PIL image to a numpy array. An example of the code I am working with is below. if image.mode != '1': image = image.convert('1') #convert to B&W data = np.array(image) #convert data to a numpy array n_lines = data.shape[0] #number of raster passes line_range = range(data.shape[1]) for l in range(n_lines): # process one horizontal line of the image line = data[l] for n in line_range: if line[n] == 1: write_line_to(xl, z+scale*n, speed) #conversion to other program code elif line[n] == 0: run_to(xl, z+scale*n) #conversion to other program code I have tried this using both array and asarray for the conversion, and gotten different errors. If I use array, then the data I get out is nothing like what I put in. It looks like several very shrunken partial images side by side, with the remainder of the image space filled in in black. If I use asarray, then the entirety of python crashes during the raster step (on a random line). If I work with a greyscale image ('L'), then neither of these errors occurs for either array or asarray. Does anyone know what I am doing wrong? Is there something odd about the way PIL encodes B&W images, or something special I need to pass numpy to make it convert properly?

Read the article
NETCF - Displaying custom shaped form in compact framework

- by Nullstr1ng

Hi guys, I am developing some small little application that sits on the screen and on top of all window and flies around the screen, could be a bird or a butterfly or a fish. But I have a little bit of problem. How do I redraw the background without my images included? or how do I copy the background (not the wallpaper) behind my form with image? is it possible to have a custom shaped form also? currently, the app looks like this the 2nd image with X is what I currently have (it has some sort of tearing) and it's supposed to be the 1st one with check mark.

Read the article
SQL Server 2008, not enough disk space

- by snorlaks

Hello, I'm executing sql query on my database. I have SQL Server 2008 installed on my D harddrive which has 55 GB free space. I have also C drive which has sth like 150 MB free (right now). While executing that query on quite a big table (16 GB) I have an error: An error occurred while executing batch. Error message is: Not enough disk space. I would like to know if there is any possibility that I can make SQL Server to use D drive instead of C Or maybe there is any other problem with what I'm doing ? Thanks for help

Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61 | Next Page >