Search Results

Search found 3071 results on 123 pages for 'executing'.

Page 54/123 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • BizTalk HL7 Receive Pipeline Exception

    - by Paul Petrov
    If you experience sequence of errors below with BizTalk HL7 MLLP receive ports you may need to request a hotfix from Microsoft. Knowledge base article number is 2454887 but it’s still not available on the KB site. The hotfix is recently released and you may need to open support ticket to get to it. It requires three other hotfixes installed: ·         970492 (DASM 3.7.502.2) ·         973909 (additional ACK codes) ·         981442 (Microsoft.solutions.btahl7.mllp.dll 3.7.509.2) If the exceptions below repeatedly appear in the event log you most likely would be helped by the hotfix: Fatal error encountered in 2XDasm. Exception information is Cannot access a disposed object. Object name: 'CEventingReadStream'. There was a failure executing the receive pipeline: "BTAHL72XPipelines.BTAHL72XReceivePipeline, BTAHL72XPipelines, Version=1.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "BTAHL7 2.X Disassembler" Receive Port: "ReceivePortName" URI: "IPAddress:portNumber" Reason: Cannot access a disposed object. Object name: 'CEventingReadStream'. The Messaging Engine received an error from transport adapter "MLLP" when notifying the adapter with the BatchComplete event. Reason "Object reference not set to an instance of an object." We’ve been through a lot of troubleshooting with Microsoft Product Support and they did a great job finding an issue and releasing a fix.

    Read the article

  • Loading the Cache from the Business Application Server

    - by ACShorten
    By default, the Web Application server will directly connect to the Database to load its cache at startup time. Customers, who implement the product installation in distributed mode, where the Web Application Server and Business Application Server are deployed separately, may wish to prevent the Web Application Server to connect to the database directly. Installation of the product in distributed mode was introduced in Oracle Utilities Application Framework V2.2. In the Advanced Web Application Server configuration, it is possible to set the Create Simple Web Application Context (WEBAPPCONTEXT) to true to force the Web Application Server to load its cache via the Business Application rather than direct loading. The value of false will retain the default behavior of allowing the Web Application Server to connect directly to the database at startup time to load the cache. The value of true will load the cache data via direct calls to the Business Application Server, which can cause a slight delay in the startup process to cater for the architecture load rather than the direct load. The impact of the settings is illustrated in the figure below:                             When setting this value to true, the following properties files should be manually removed prior to executing the product: $SPLEBASE/etc/conf/root/WEB-INF/classes/hibernate.properties $SPLEBASE/splapp/applications/root/WEB-INF/classes/hibernate.properties Note: For customers who are using a local installation, where the Web Application Server and Business Application Server are combined in the deployed server, it is recommended to set this parameter to false, the default, unless otherwise required. This facility is available for Oracle Utilities Application Framework V4.1 in Group Fix 3 (via Patch 11900153) and Patch 13538242 available from My Oracle Support.

    Read the article

  • How can a non-technical person can learn to write a spec for small projects?

    - by Joseph Turian
    How can a non-technical person learn to write specs for small projects? A friend of mine is trying to outsource some development on a statistics project. In particular, he does a lot of work in excel, and wants to outsource the creation of scripts to do what he now does by hand. However, my friend is extremely non-technical. He is poor at writing technical specs. When he does write a spec, it is written the way you would describe doing something in excel (go to this cell and then copy the value to that cell). It is also overly verbose, and does examples several times. I'm not sure if he properly describes corner cases. The first project he outsourced was a failure. I think he overdescribed some details, but underdescribed corner cases. That and/or the coder he hired didn't think through the corner cases and ask appropriate questions. I'm not sure. I got on IM with him and it took me half an hour to dig out a description that should have taken five minutes or less to describe. I wrote the scripts for him at the end, but didn't examine why his process with the coder failed. He has asked me for help. However, I refuse to get involved, because taking his spec and translating it into clear requirements is 10x more work than executing on a clearly written spec. What is the right way for him to learn? Are there resources he could use? Are there ways he can learn from small, low-pressure practice projects with coders? [edit: Most of his scripts are statistical and data processing oriented. e.g. take this column and run an average over it. Remove these rows under these conditions. So the challenge is different than spec'ing a web app.]

    Read the article

  • Having trouble installing guest additions for a Xubuntu 13.10 guest OS in Virtualbox 4.2.10

    - by Duval Pearson III
    I am using Ubuntu 13.04 64-BIT as my host operating system running Virtual Box 4.2.10. I get this message when I tell virtualbox to install guest additions(CTRL+D),mounting the volume in the guest OS and run the VBoxLinuxAdditions.run file using root by: sudo ./VBoxLinuxAdditions.run It starts and then comes to these error messages: Verifying archive integrity... All good. Uncompressing VirtualBox 4.2.10 Guest Additions for Linux.......... VirtualBox Guest Additions installer Removing existing VirtualBox non-DKMS kernel modules ...done. Building the VirtualBox Guest Additions kernel modules The headers for the current running kernel were not found. If the following module compilation fails then this could be the reason. Building the main Guest Additions module ...done. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) Doing non-kernel setup of the Guest Additions ...done. Installing the Window System drivers Warning: unknown version of the X Window System installed. Not installing X Window System drivers. Installing modules ...done. Installing graphics libraries and desktop services components ...done. allusers@allusers-VirtualBox:/media/allusers/VBOXADDITIONS_4.2.10_84104$ I followed everything from the official VirtualBox manual on installing guest additions for linux I used some other commands such as: sudo apt-get install build-essential linux-headers-$(uname -r) dkms and: sudo apt-get install virtualbox-guest-x11 I rebooted after executing those command and it still wont work. It still says the kernel modules are missing and the window is not seamless. Any idea what could be the problem?

    Read the article

  • Commands don't have permission when using absolute path

    - by Markos
    I have folders set up this way: /srv/samba/video getfacl /srv/samba/video # file: srv/samba/video # owner: root # group: nogroup user::rwx group::--- group:sambaclients:rwx group:deluge:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:sambaclients:rwx default:group:deluge:rwx default:mask::rwx default:other::--- That means, user deluge has rwx to folder /srv/samba/video. However, when running command as user deluge, I am getting weird permission errors. When in folder /srv/samba/video: sudo -u deluge mkdir foo works flawlessly. But when using absolute path: sudo -u deluge mkdir /srv/samba/video/foo I am getting permission denied. When running sudo -u deluge id, I get output uid=113(deluge) gid=124(deluge) skupiny=124(deluge) which shows that user deluge is indeed in group deluge. Also, the behavior was the same when I gave the permissions also to user deluge not just group deluge. When executing as non-system user, it does work. The reason that I want to use absolute paths is that I am using automatically triggered post-download script which extracts some files into the folder. I have spent way too many hours to solve this problem myself. mkdir isn't the only command that fails, touch is doing the same thing, so I suspect that it's not mkdir's fault. If you need more info, I will try to put it in here, just ask. Thanx in advance. Edit: It seems that the root of the problem is acl set on perent folder /srv/samba, which indeed does not grant permissions to deluge (but neither denies it). getfacl /srv/samba # file: srv/samba # owner: root # group: nogroup user::rwx group::--- group:sambaclients:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:sambaclients:rwx default:mask::rwx default:other::--- If I grant the permission also to this folder, it suddenly starts to work so I believe that the acl on /srv/samba is somehow denying the permissions to deluge. So the question is: how do I set acl to both /srv/samba and /srv/samba/video so that sambaclients have access to whole /srv/samba and subdirectories and deluge has access only to /srv/samba/video and subdirectories?

    Read the article

  • Black screen appears when booting new install of 11.10 on my desktop, cannot access Grub menu to fix

    - by Cee
    I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

    Read the article

  • Database Replication check script not running

    - by Tarun
    I'm trying to create a Database Replication checking script but I'm getting error while executing it. Here is the script #!/bin/bash PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin export PATH #Server Name Server="Test Server" #My Sql Username and Password User=root Password="a" #Maximum Slave Time Delay Delay="60" #File Path to store error and email the same Log_File=/tmp/replicationcheck.txt #Email Settings Subject="$Server Replication Error" Sender_Name=TestServer Recipients="[email protected]" #Mail Alert Function mailalert(){ sendmail -F $Sender_Name -it <<END_MESSAGE To: $Recipients Subject: $Subject $Message_Replication_Error `/bin/cat $Log_File` END_MESSAGE } #Show Slave Status Show_Slave_Status=`echo "show slave status \G;" | mysql -u $User -p$Password 2>&1` #Getting list of queries in mysql $Show_Slave_Status | grep "Last_" > $Log_File #Check if slave running $Show_Slave_Status | grep "Slave_IO_Running: No" if [ "$?" -eq "0" ]; then Message_Replication_Error="$Server Replication error please check. The Slave_IO_Running state is No." mailalert exit 1 else $Show_Slave_Status | grep "Slave_IO_Running: Connecting" if [ "$?" -eq "0" ]; then Message_Replication_Error="$Server Replication error please check. The Slave_IO_Running state is Connecting." mailalert exit 1 fi fi #Check if replication delayed Seconds_Behind_Master=$Show_Slave_Status | grep "Seconds_Behind_Master" | awk -F": " {' print $2 '} if [ "$Seconds_Behind_Master" -ge "$Delay" ]; then Message_Replication_Error="Replication Delayed by $Seconds_Behind_Master." mailalert else if [ "$Seconds_Behind_Master" = "NULL" ]; then Message_Replication_Error="$Server Replication error please check. The Seconds_Behind_Master state is NULL." mailalert fi fi

    Read the article

  • Why I don't use SSIS checkpoint files

    - by jamiet
    In a recent discussion in regard to general ETL best practises the subject of checkpoint files as a means for package restartability came up and I stated that I was dead against using them. For anyone that may care, here is why: Configuring them is distinctly unintuitive (that's a matter of opinion but if you follow the link I'll wager that you will agree) they don't make any allowance for loop iterations they cannot store variables of type Object they are limited in ability. There are many scenarios where you may want to execute certain containers regardless of whether the package is started from a checkpoint file but the current usage model does not allow for this. they are ignored by eventhandlers, which wouldn't be so bad if there were a way to toggle this behaviour in certain scenarios they dont work properly I'll expand on the last bullet point. I have encountered situations where the behaviour for tasks executing concurrently is unpredictable. That is, sometimes the completion of a task that executes concurrently with a failed/failing task will make it into the checkpoint file and sometimes it won't. This is near-impossible to reproduce but it does happen as my good friend John Welch will hopefully concur (if he is reading). Is anyone out there making successful use of checkpoint files within SSIS? I would be interested in knowing about that if so. @Jamiet

    Read the article

  • Change power button to 'Ask' in Xubuntu 13.10

    - by Gully.Moy
    I have recently installed Xubuntu 13.10 on my Vaio vpcea making me a Linux beginner. The problem is that laptop's power button is right on the edge of the bezel making it far too easy to press accidentally, in my opinion a design fault by Sony. At present, when I press the power button it shuts down strait away and as you can imagine, when I'm accidentally pressing it all the time it gets very annoying! So I planned to change it to ask what I would like to do when I press it or at least ask if I'm sure. So I went through the xfce GUI options "Settings Manager" - "Power Manager" to the field "When power button is pressed", but it was already set to "Ask". So I did some digging and found a thread telling me to navigate to /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-power-manager.xml where it said to find power-button-action and check that value="3". It already did. So I looked some more and found this thread which focuses on acpi scripts. I tried solution 1 & 2 using sudoedit to change the files accordingly (I have made executable bash shell scripts already so I think I followed them correctly), but still no difference. I also found this thread which instructed me to edit /etc/systemd/logind.conf so that HandlePowerKey=ignore. Still no luck. I even tried my own approach to completely disable /etc/acpi/powerbtn.sh by renaming it powerbtn.sh.bak hoping for at least no response from the power button... and I have done many reboots in between... but still it shuts down! I have also read that some people have the file /etc/acpi/events/power_button, but I do not. So does anyone have any other ideas? What else could be executing the shutdown sequence Is there something I'm missing? I haven't undone any of these actions so every one of the above files is currently edited on my computer, with the exception that "Solution 2" automatically undone "Solution 1" above. Thanks guys.

    Read the article

  • Cron not able to succesfully change background

    - by Solenoid
    I'm running 12.04 with a custom XML background (modification on Day of Ubuntu) that changes based on time of day. I've noticed that there's a significant delay between when the changes are scheduled to take place in the XML file and when they actually show up on the background. I've also noticed that when I resume from suspend I don't get the correct background image either. I've found that cycling the wallpaper manually will fix this, and I've written a script to automate the process. If I execute the script manually it works fine. However, when I schedule the script to run in cron, cron doesn't change the background. To make sure that the script was being run properly by cron, I had it create a directory in my home folder after running the background change, and the directory is created successfully, so I know cron is running and executing the script. My script: #!/bin/bash sleep 5 gsettings set org.gnome.desktop.background picture-uri file:///home/zak/Pictures/Wallpaper/DOU2.xml sleep 1 gsettings set org.gnome.desktop.background picture-uri file:///home/zak/Pictures/Wallpaper/DOU.xml sleep 1 mkdir /home/zak/iscronworking exit Is cron just not able to access gsettings? The job is on my user crontab so it shouldn't be running as root. Alternately, is there any way to make Precise play nicely with XML wallpaper?

    Read the article

  • Oracle SQL Developer: Fetching SQL Statement Result Sets

    - by thatjeffsmith
    Running queries, browsing tables – you are often faced with many thousands, if not millions, of rows. Most people are happy with looking at the first few rows. But occasionally you need to see more. SQL Developer doesn’t show you all records, all at once. Instead, it brings the records down in ‘chunks,’ or as-needed. How It Works There is a preference that tells SQL Developer how many records to get in a single request, or ‘fetch’ of records. The default is 50… So if I run a query that returns MORE than 50 rows: There’s more than 50 records in this resultset, but we have 50 in the grid to start with. We don’t know how many records are in this result set actually. To show the record count here, we actually go physically query the database with a row count type query. All we know is that the query has finished executing, and that there are rows available to go fetch. It tells us when it’s done. As you scroll through the grid, if you get to record 50 and scroll more, we’ll get 50 more records. Or, you can cheat to get to the ‘bottom’ of the result set. You can ask SQL Developer to just to get all the records at once… Once all the records have been fetched, you’ll see this: All rows fetched! A word of caution There’s a reason we have the default set to 50 and not 1000. Bringing back data can get expensive and heavy. We’ve found the best performance to be found in that 50 to 200 record range.

    Read the article

  • Simultaneous AI in turn based games

    - by Eduard Strehlau
    I want to hack together a roguelike. Now I thought about entity and world representation and got to a quite big problem. If you want all the AI to act simultaneously you would normally(in cellular automa for examble) just copy the cell buffer and let all action of indiviual cells depend on the copy. Actions which are not valid anymore after some cell before the cell you are currently operating on changed the original enviourment(blocking the path) are just ignored or reapplied with the "current"(between turns) environment. After all cells have acted you copy the current map to the buffer again. Now for an environment with complex AI and big(datawise) entities the copying would take too long. So I thought you could put every action and entity makes into a que(make no changes to the environment) and execute the whole que after everyone took their move. Every interaction on this que are realy interacting entities, so if a entity tries to attack another entity it sends a message to it, the consequences of the attack would be visible next turn, either by just examining the entity or asking the entity for data. This would remove problems like what happens if an entity dies middle in the cue but got actions or is messaged later on(all messages would go to null, and the messages from the entity would either just be sent or deleted(haven't decided yet) But what would happen if a monster spawns a fireball which by itself tracks the player(in the same turn). Should I add the fireball to the enviourment beforehand, so make a change to the environment before executing the action list or just add the ball to the "need updated" list as a special case so it doesn't exist in the environment and still operates on it, spawing after evaluating the action list? Are there any solutions or papers on this subject which I can take a look at? EDIT: I don't need information on writing a roguelike I need information on turn based ai in respective to a complex enviourment.

    Read the article

  • Ubuntu and racadm

    - by lmqcn
    I recently purchased a used poweredge 1850 server and it came with a DRAC card. After wiping the HDD and installing ubuntu server 12.04.3 LTS amd64 on it, I am now trying to gain access to the DRAC which I believe is version 4. I have properly configured the DRAC to use it's own IP on my LAN and when I point my browser to the IP address, I am greeted with the DRAC login page (it has the dell logo and everything). However, after trying the credentials of root/calvin, I was denied access. So I think that the previous owners had set their own password. After doing some reading, it appears that I can reset the credentials to the default using racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword but upon entering the command, I get this error: bash: /usr/sbin/racadm: No such file or directory This holds true even if I run sudo su prior to running the racadm command. If, however, I run sudo racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword there are no errors. Yet, when I try to log into the DRAC via the web interface using the credentials of root/newpassword I am still not granted access. I installed the dell utilities via the guide at https://wiki.ubuntu.com/HardwareSupportMachinesServersDellNotes. I first tried to install the 64 bit version that is on the dell repositories, but after that was unsuccessful, I just followed the guide verbatim. No errors were produced in either case. I even followed the information at the bottom of the guide by executing sudo pppd /dev/ttyS1 1382400 crtscts noipdefault noauth lock persist connect 'chat -v "" CLIENT CLIENTSERVER "\\c"' but obviously, replacing the /dev/ttyS1 with the correct information for my system. ls -l /usr/sbin/ | grep racadm yields -rwxr-xr-x 1 root root 87930 Sep 16 04:03 racadm I have tried these credentials after each attempt of changing the password: root/calvin root/newpassword admin/calvin admin/newpassword All have been unsuccessful. What is the next course of action that I should take?

    Read the article

  • Getting MTP to work with a Galaxy tab 2 7.0?

    - by Wouter
    I'm trying to get MTP with the galaxy tab 2 7.0 working on my ubuntu installation. Such that I can access the files. I tried to do what is described here: http://www.omgubuntu.co.uk/2011/12/how-to-connect-your-android-ice-cream-sandwich-phone-to-ubuntu-for-file-access I however fail at executing one of the following commands mtp-detect | grep idVendor mtp-detect | grep idProduct This fails [20:42|0] $ mtp-detect | grep idVender Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 [20:44|0] $ mtp-detect | grep idProduct Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 Now my guess was was that the idVender is the same as the VID (04e8) and the idProduct is the same as PID (6860) Now I continued to work with those values and completed the tutorial. When finished I tried android-connect This returned fuse: bad mount point `/media/GalaxyTab': Transport endpoint is not connected Does anybody have a clue what to do? Also I want to note that when I connect my GalaxyTab 2 7.0 that I still get a pop-up of ubuntu that a device was connected. I also can still see the mapstructure, the problem however is is that all the folders have 0 bytes and do not have any subfolders. I can only see the folders in the root. ps. I also checked a similar question and tried what is described in this answer http://askubuntu.com/a/88630/27480

    Read the article

  • Ubuntu security with services running from /opt

    - by thejartender
    It took me a while to understand what's going on here (I think), but can someone explain to me if there are security risks with regards to my logic of what's going on here as I am trying to set up a home web server as a developer with some good Linux knowledge? Ubuntu is not like other systems, as it has restricted the root user account. You can not log in as root or su to root. This was a problem for me as I have had to install numerous applications and services to /opt as per user documentation (XAMPPfor Linux is a good example). The problem here is that this directory is owned by root:root. I notice that my admin user account does not belong to root group through the following command: groups username so my understanding is that even though the files and services that I place in /opt belong to root, executing them by means of sudo (as required) does not mean that they are run as root? I imagine that the sudo command is hidden somewhere under belonging to the root user and has a 775 permission? So the question I have is if running a service like Tomcat, Apcahe, etc exposes my system like on other systems? Obviously I need to secure these in configurations, but isn't the golden rule to never run something as root? What happens if I have multiple services running under same user/group with regards to a compromised server?

    Read the article

  • Meet The MySQL Experts Podcast: MySQL Utilities

    - by Wei-Chen Chiu
    Managing a MySQL database server can become a full time job. In many occasions, one MySQL DBA needs to manage multiple, even tens of, MySQL servers, and tools that bundle a set of related tasks into a common utility can be a big time saver, allowing you spend more time improving performance and less time executing repeating tasks. While there are several such utility libraries to choose, it is often the case that you need to customize them to your needs. The MySQL Utilities library is the answer to that need. It is open source so you can modify and expand it as you see fit. In the latest episode of the "Meet the MySQL Experts" podcast series, Chuck Bell, Sr. MySQL Software Developer at Oracle, introduces a variety of recently released MySQL Utilities, and how DBAs can save significant time using the utilities. Listen to the podcast and learn the highlights in 10 minutes. If you want to gain further details, attend the on-demand webinar for a more complete introduction, including: Use cases for each utility How to group utilities for even more usability How to modify utilities for your needs How to develop and contribute new utilities  Enjoy!

    Read the article

  • Why is sudo bash different from regular bash

    - by cyberjar09
    Problem description : I am using something called play framework in my development which requires me to make the python script play available in the path. Hence I create a symbolic link in /usr/local/bin ... Now I have written a shell script (call it status.sh) which calls this python script as follows : play status <some values here related to my app> &> /tmp/xyz.txt and this shell script then sends me the file via email. This works perfectly when I execute the script as follows ./script.sh. However when the script is executed as a cron expression everyday I get an output from stderr saying 'play: command not found'. Hence I did some digging on my own and here are my findings : echo $PATH when I am on the shell shows that I have /usr/local/bin available to me hence I can successfully execute the command play status however when I type in sudo bash and then echo $PATH I do not have the path /usr/local/bin anymore. It is a limited set of folders (one of them being /usr/bin). Q : Why this behavior ?! I fail to understand why the path is different. Also as a workaround would you suggest I do : new symbolic link from /usr/bin to /usr/local/bin (what are the side effects of this?) remove /usr/local/bin sym link altogether and only use /usr/bin is there a convention that I am not following here for linking new programs and executing them from $PATH ? Thanks.

    Read the article

  • Common Live Upgrade problems

    - by user12611829
    As I have worked with customers deploying Live Upgrade in their environments, several problems seem to surface over and over. With this blog article, I will try to collect these troubles, as well as suggest some workarounds. If this sounds like the beginnings of a Wiki, you would be right. At present, there is not enough material for one, so we will use this blog for the time being. I do expect new material to be posted on occasion, so if you wish to bookmark it for future reference, a permanent link can be found here. Live Upgrade copies over ZFS root clone This was introduced in Solaris 10 10/09 (u8) and the root of the problem is a duplicate entry in the source boot environments ICF configuration file. Prior to u8, a ZFS root file system was not included in /etc/vfstab, since the mount is implicit at boot time. Starting with u8, the root file system is included in /etc/vfstab, and when the boot environment is scanned to create the ICF file, a duplicate entry is recorded. Here's what the error looks like. # lucreate -n s10u9-baseline Checking GRUB menu... System has findroot enabled GRUB Analyzing system configuration. Comparing source boot environment file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment . Source boot environment is . Creating boot environment . Creating file systems on boot environment . Creating file system for in zone on . The error indicator ----- /usr/lib/lu/lumkfs: test: unknown operator zfs Populating file systems on boot environment . Checking selection integrity. Integrity check OK. Populating contents of mount point . This should not happen ------ Copying. Ctrl-C and cleanup If you weren't paying close attention, you might not even know this is an error. The symptoms are lucreate times that are way too long due to the extraneous copy, or the one that alerted me to the problem, the root file system is filling up - again thanks to a redundant copy. This problem has already been identified and corrected, and a patch (121431-58 or later for x86, 121430-57 for SPARC) is available. Unfortunately, this patch has not yet made it into the Solaris 10 Recommended Patch Cluster. Applying the prerequisite patches from the latest cluster is a recommendation from the Live Upgrade Survival Guide blog, so an additional step will be required until the patch is included. Let's see how this works. # patchadd -p | grep 121431 Patch: 121429-13 Obsoletes: Requires: 120236-01 121431-16 Incompatibles: Packages: SUNWluzone Patch: 121431-54 Obsoletes: 121436-05 121438-02 Requires: Incompatibles: Packages: SUNWlucfg SUNWluu SUNWlur # unzip 121431-58 # patchadd 121431-58 Validating patches... Loading patches installed on the system... Done! Loading patches requested to install. Done! Checking patches that you specified for installation. Done! Approved patches will be installed in this order: 121431-58 Checking installed patches... Executing prepatch script... Installing patch packages... Patch 121431-58 has been successfully installed. See /var/sadm/patch/121431-58/log for details Executing postpatch script... Patch packages installed: SUNWlucfg SUNWlur SUNWluu # lucreate -n s10u9-baseline Checking GRUB menu... System has findroot enabled GRUB Analyzing system configuration. INFORMATION: Unable to determine size or capacity of slice . Comparing source boot environment file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. INFORMATION: Unable to determine size or capacity of slice . Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment . Source boot environment is . Creating boot environment . Cloning file systems from boot environment to create boot environment . Creating snapshot for on . Creating clone for on . Setting canmount=noauto for in zone on . Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. File propagation successful Copied GRUB menu from PBE to ABE No entry for BE in GRUB menu Population of boot environment successful. Creation of boot environment successful. This time it took just a few seconds. A cursory examination of the offending ICF file (/etc/lu/ICF.3 in this case) shows that the duplicate root file system entry is now gone. # cat /etc/lu/ICF.3 s10u8-baseline:-:/dev/zvol/dsk/panroot/swap:swap:8388608 s10u8-baseline:/:panroot/ROOT/s10u8-baseline:zfs:0 s10u8-baseline:/vbox:pandora/vbox:zfs:0 s10u8-baseline:/setup:pandora/setup:zfs:0 s10u8-baseline:/export:pandora/export:zfs:0 s10u8-baseline:/pandora:pandora:zfs:0 s10u8-baseline:/panroot:panroot:zfs:0 s10u8-baseline:/workshop:pandora/workshop:zfs:0 s10u8-baseline:/export/iso:pandora/iso:zfs:0 s10u8-baseline:/export/home:pandora/home:zfs:0 s10u8-baseline:/vbox/HardDisks:pandora/vbox/HardDisks:zfs:0 s10u8-baseline:/vbox/HardDisks/WinXP:pandora/vbox/HardDisks/WinXP:zfs:0 Solaris 10 9/10 introduces new autoregistration file This one is actually mentioned in the Oracle Solaris 9/10 release notes. I know, I hate it when that happens too. Here's what the "error" looks like. # luupgrade -u -s /mnt -n s10u9-baseline System has findroot enabled GRUB No entry for BE in GRUB menu Copying failsafe kernel from media. 61364 blocks miniroot filesystem is Mounting miniroot at ERROR: The auto registration file does not exist or incomplete. The auto registration file is mandatory for this upgrade. Use -k argument along with luupgrade command. autoreg_file is path to auto registration information file. See sysidcfg(4) for a list of valid keywords for use in this file. The format of the file is as follows. oracle_user=xxxx oracle_pw=xxxx http_proxy_host=xxxx http_proxy_port=xxxx http_proxy_user=xxxx http_proxy_pw=xxxx For more details refer "Oracle Solaris 10 9/10 Installation Guide: Planning for Installation and Upgrade". As with the previous problem, this is also easy to work around. Assuming that you don't want to use the auto-registration feature at upgrade time, create a file that contains just autoreg=disable and pass the filename on to luupgrade. Here is an example. # echo "autoreg=disable" /var/tmp/no-autoreg # luupgrade -u -s /mnt -k /var/tmp/no-autoreg -n s10u9-baseline System has findroot enabled GRUB No entry for BE in GRUB menu Copying failsafe kernel from media. 61364 blocks miniroot filesystem is Mounting miniroot at ####################################################################### NOTE: To improve products and services, Oracle Solaris communicates configuration data to Oracle after rebooting. You can register your version of Oracle Solaris to capture this data for your use, or the data is sent anonymously. For information about what configuration data is communicated and how to control this facility, see the Release Notes or www.oracle.com/goto/solarisautoreg. INFORMATION: After activated and booted into new BE , Auto Registration happens automatically with the following Information autoreg=disable ####################################################################### Validating the contents of the media . The media is a standard Solaris media. The media contains an operating system upgrade image. The media contains version . Constructing upgrade profile to use. Locating the operating system upgrade program. Checking for existence of previously scheduled Live Upgrade requests. Creating upgrade profile for BE . Checking for GRUB menu on ABE . Saving GRUB menu on ABE . Checking for x86 boot partition on ABE. Determining packages to install or upgrade for BE . Performing the operating system upgrade of the BE . CAUTION: Interrupting this process may leave the boot environment unstable or unbootable. The Live Upgrade operation now proceeds as expected. Once the system upgrade is complete, we can manually register the system. If you want to do a hands off registration during the upgrade, see the Oracle Solaris Auto Registration section of the Oracle Solaris Release Notes for instructions on how to do that. Technocrati Tags: Oracle Solaris Patching Live Upgrade var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

    Read the article

  • Architecture Standards &ndash; BPMN vs. BPEL for Business Process Management

    - by pat.shepherd
    I get asked often which business process standard an organization should use; BPMN or BPEL?  As I explain to folks, they both have strengths.  Here is a great article that helps understand the benefits of both and where to use them.  The good news is that, with Oracle SOA Suite and BPM suite, you have the option and flexibility to use both in the same SCA model and runtime container.  Good stuff. Here is the great article that Mark Nelson wrote: The right tool for the right job BPEL and BPMN are both ‘languages’ or ‘notations’ for describing and executing business processes. Both are open standards. Most business process engines will support one or the other of these languages. Oracle however has chosen to support both and treat them as equals. This means that you have the freedom to choose which language to use on a process by process basis. And you can freely mix and match, even within a single composite. (A composite is the deployment unit in an SCA environment.) So why support both? Well it turns out that BPEL is really well suited to modeling some kinds of processes and BPMN is really well suited to modeling other kinds of processes. Of course there is a pretty significant overlap where either will do a great job What BPM adds to SOA Suite | RedStack

    Read the article

  • Build & Install Ruby Gems with Rake

    - by kerry
    Are you using rake to build your gems?  Have you ever wished there were an install task to install it to your machine?  I, for one, have written something like this a few times: 1: desc 'Install the gem' 2: task :install do 3: exec 'gem install pkg/goodies-0.1.gem' 4: end 5:  That is pretty straightforward.  However, this will not work under JRuby on Mac where the command should be ‘jgem’.  So we can enhance it to detect the platform, and host OS: 1: desc 'Install the gem' 2: task :install do 3: executable = RUBY_PLATFORM[/java/] && Config::CONFIG[/darwin/] ? 'jgem' : 'gem' 4: exec "#{executable} install pkg/goodies-0.1.gem" 5: end This is a little better.  I am still not comfortable with the sloppiness of building a shell command and executing it though.  It is possible to do it with strictly Ruby.  I am also going namespace it to integrate better with the GemPackageTask.  Now it will be accessed via ‘rake gem:install’ 1: desc 'Install the gem' 2: namespace 'gem' do 3: task :install do 4: Gem::Installer.new('pkg/goodies-0.1.gem').install 5: end 6: end   I have included this in the goodies gem 0.2, so go ahead and install it!  ‘gem install goodies’

    Read the article

  • What is the correct way to restart udev in Ubuntu?

    - by zerkms
    I've changed the name of my eth1 interface to eth0. How to ask udev now to re-read the config? service udev restart and udevadm control --reload-rules don't help. So is there any valid way except of rebooting? (yes, reboot helps with this issue) UPD: yes, I know I should prepend the commands with sudo, but either one I posted above changes nothing in ifconfig -a output: I still see eth1, not eth0. UPD 2: I just changed the NAME property of udev-rule line. Don't know any reason for this to be ineffective. There is no any error in executing of both commands I've posted above, but they just don't change actual interface name in ifconfig -a output. If I perform reboot - then interface name changes as expected. UPD 3: let I explain all the case better ;-) For development purposes I write some script that clones virtual machines (VirtualBox-driven) and pre-sets them up in some way. So I perform a command to clone VM, start it and as long as network interface MAC is changed - udev adds the second rule to network persistent rules. Right after machine is booted for the first time there are 2 rules: eth0, which does not exist, as long as it existed in the original VM image MAC eth1, which exists, but all the configuration in all files refers to eth0, so it is not that good for me So I with sed delete the line with eth0 (it is obsolete and useless in cloned image) and replace eth1 with eth0. So currently I have valid persistent rule, but there is still eth1 in /dev. The issue: I don't want to reboot the machine (it will take another time, which is not good thing on building-VM-stage) and just want to have my /dev rebuilt with some command so I have ready-to-use VM without any reboots.

    Read the article

  • Oracle JDK 7u10 released with new security features

    - by Henrik Stahl
    A few days ago, we released JRE and JDK 7 update 10. This release adds support for the following new platforms: Windows 8 on x86-64. Note that Modern UI (aka Metro) mode is not supported. Internet Explorer 10 on Windows 8. Mac OS X 10.8 (Mountain Lion) This release also introduces new features that provide enhanced security for Java applet and webstart applications, specifically: The Java runtime tracks if it is updated to the latest security baseline. If you try to execute an unsigned applet with an outdated version of Java, a warning dialog will prompt you to update before running the applet. The Java runtime includes a hardcoded best before date. It is assumed that a new version will be released before this date. If the client has not been able to check for an update prior to this date, the Java runtime will assume that it is insecure and start warning the user prior to executing any applets. The Java control panel now includes an option to set the desired security level on a low-medium-high-very high scale, as well as an option to disable Java applets and webstart entirely. This level controls things such as if the Java runtime is allowed to execute unsigned code, and if so what type of warning will be displayed to the user. More details on the security settings can be found in the documentation. See below for a sample screenshot. The new update of the JRE and the JDK are available via OTN. To learn more about the release please visit the release notes.

    Read the article

  • Problems installing Ubuntu on a vaio with SSD, GRUB installation failure

    - by Alberto
    I have installed and used Ubuntu in several computers. But now I have a problem that I don't know how to solve. I have a Vaio (Product name: vpcz13c5e), it has a SSD 128gb. I decided to install Ubuntu (12.04, but I have tried older versions as well). Firstly, I tested with live USB, and everything was fine, so I decided go for the complete installation. Then everything went as follows: I chose to use the whole disk (first option, formatting everything). I got a message Executing 'grub-install' /deb/sdb failed. This is a fatal error After clicking ok I got another window with 3 options: the first offers different devices to install the bootloader on (I tried all of them and none works). Second option: Continue without a bootloader. In that case I got You will need to manually install a bootloader in order to start Ubuntu The third option is Cancel the installation. So, I chose Continue without a bootloader. Then I restart the computer (with the Live cd) and in a terminal type sudo fdisk -l but I obtain fdisk: unable to seek on /dev/sda: Invalid argument What can I do? any help will be appreciated.

    Read the article

  • LASTDATE dates arguments and upcoming events #dax #tabular #powerpivot

    - by Marco Russo (SQLBI)
    Recently I had to write a DAX formula containing a LASTDATE within the logical condition of a FILTER: I found that its behavior was not the one I expected and I further investigated. At the end, I wrote my findings in this article on SQLBI, which can be applied to any Time Intelligence function with a <dates> argument.The key point is that when you write LASTDATE( table[column] )in reality you obtain something like LASTDATE( CALCULATETABLE( VALUES( table[column] ) ) )which converts an existing row context into a filter context.Thus, if you have something like FILTER( table, table[column] = LASTDATE( table[column] ) the FILTER will return all the rows of table, whereas you probably want to use FILTER( table, table[column] = LASTDATE( VALUES( table[column] ) ) )so that the existing filter context before executing FILTER is used to get the result from VALUES( table[column] ), avoiding the automatic expansion that would include a CALCULATETABLE that would hide the existing filter context.If after reading the article you want to get more insights, read the Jeffrey Wang's post here.In these days I'm speaking at SQLRally Nordic 2012 in Copenhagen and I will be in Cologne (Germany) next week for a SSAS Tabular Workshop, whereas Alberto will teach the same workshop in Amsterdam one week later. Both workshops still have seats available and the Amsterdam's one is still in early bird discount until October 3rd!Then, in November I expect to meet many blog readers at PASS Summit 2012 in Seattle and I hope to find the time to write other article on interesting things on Tabular and PowerPivot. Stay tuned!

    Read the article

  • Trying to make ZeroRadiant work on Lubuntu 11.10

    - by maniat1k
    I'm looking to use ZeroRadiant to work on ubuntu, it's to create maps on urban terror, I know that works on windows and mac. I found this HOWTO but could not make it work. I've got stock on this when I do. ~/ZeroRadiant-src$ scons target=radiant,q3map2 config=release at the end shows me this: collect2: ld returned 1 exit status scons: *** [build/release/radiant/radiant.bin] Error 1 scons: building terminated because of errors. there's a note on the how to that says: If you get other errors, you may try asking for help in the GtkRadiant IRC channel, which is listed on the main ZeroRadiant page. the page does not there and I could find that IRC channel. EDIT thanks to @jokerdino in the chat sow me this If you have the proprietary NVIDIA driver installed and you get the following error when executing the build target above: /usr/bin/ld: cannot find -lGL collect2: ld returned 1 exit status scons: *** [build/release/radiant/radiant.bin] Error 1 scons: building terminated because of errors. then you should install one of the nvidia-glx-dev* packages as mentioned above in Step A, then try to execute the main build target to compile GtkRadiant again. I don't have nvidia; I do have ATI AMD Radeon HD 6320, and looks like it works. GL_VERSION: 4.1.11251 Compatibility Profile Context GL_VENDOR: ATI Technologies Inc. GL_RENDERER: AMD Radeon HD 6320 Graphics I'm think I do have video issues but.. how do I detect this? how can I continue?

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >