Search Results

Search found 22874 results on 915 pages for 'hidden network'.

Page 54/915 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Network really slow with TL-WN951N wireless card

  - by Sam

  I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Sitemap structure for network of subdomains

  - by HaCos

  I am working on a project that's a network of 2 domains (domain.gr & domain.com.cy) of subdomains similar to Hubpages [each user gets a profile under a different subdomain & there is a personal blog for that user as well] and I think there is something wrong with our sitemap submission. Sometimes it takes weeks in order a new profiles to get indexed. We make use of one Webmasters account in order to manage all network and we don't want to create different accounts for each subdomain since there are more than 1000 already. According to this post http://goo.gl/KjMCjN, I end up on a structure of 5 sitemaps with the following structure : 1st sitemap will be for indexing the others. 2nd sitemap for all users profile under the domain.gr 3nd sitemap for all users profile under the domain.com.cy 4th sitemap for all posts under the *.domain.gr - news sitemap http://goo.gl/8A8S9f 5th sitemap for all posts under the *.domain.com.cy - news sitemap again Now my questions: Should we create news sitemaps or just list all post in 2nd & 3rd sitemap? Does links ordering has anything to do? Eg: Most recent user created be first in sitemap or doesn't make any different and we just need to make sure that lastmod date is correct? Does anyone guess how Hubpages submit their sitemap in Webmasters so maybe we could follow there way? Any alternative or better way to index this kind of schema? PS: Our network is multi language - Greek & English are available. We make use of hreflang tags on the head of each page to separate country target of each version.

  Read the article

• Exempt programs from using active VPN connection

  - by Oxwivi

  When I connect to a VPN, all my network traffic is automatically routed through it. Is there a way to add exemptions to that? I don't know if adding exceptions has anything to do with the VPN protocol, but the VPN I'm using is of the OpenVPN protocol. Speaking of OpenVPN, why is it not installed by default on Ubuntu installs unlike PPTP? I could not get the list of IRCHighWay's servers, and this is the result I get trying to connect on XChat with running the bash script running: * Looking up irc.irchighway.net * Connecting to irc.irchighway.net (65.23.153.98) port 6667... * Connected. Now logging in... * You have been K-Lined. * *** You are not welcome on this network. * *** K-Lined for Open proxies are not allowed. (2011/02/26 01.21) * *** Your IP is 173.0.14.9 * *** For assistance, please email [email protected] and include everything shown here. * Closing Link: 0.0.0.0 (Open proxies are not allowed. (2011/02/26 01.21)) * Disconnected (Remote host closed socket). The IP 173.0.14.9 is the one due to my VPN. I had forgotten to check ip route list before running the script, and this is the one after running it: ~$ ip route list 99.192.193.241 dev ppp0 proto kernel scope link src 173.0.14.9 173.0.14.2 via 192.168.1.1 dev eth1 proto static 173.0.14.2 via 192.168.1.1 dev eth1 src 192.168.1.3 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.3 metric 2 169.254.0.0/16 dev eth1 scope link metric 1000 default dev ppp0 proto static Oh and running the script returned this output: ~$ sudo bash irc_route.sh Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M] [netmask N] [mss Mss] [window W] [irtt I] [mod] [dyn] [reinstate] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject inet_route [-FC] flush NOT supported I ran the script after connecting to the VPN.

  Read the article

• Add static ARP entries when network is brought up

  - by jozzas

  I have some pretty dumb IP devices on a subnet with my Ubuntu server, and the server receives streaming data from each device. I have run into a problem in that when an ARP request is issued to the device while it is streaming data to the server, the request is ignored, the cache entry times out and the server stops receiving the stream. So, to prevent the server from sending ARP requests to these devices altogether, I would like to add a static ARP entry for each, something like arp -i eth2 -s ip.of.the.device mac:of:the:device But these "static" ARP entries are lost if networking is disabled / enabled or if the server is rebooted. Where is the best place to automatically add these entries, preferably somewhere that will re-add them every time the interface eth2 is brought up? I really don't want to have to write a script that monitors the output of arp and re-adds the cache entries if they're missing. Edit to add what my final script was: Created the file /etc/network/if-up.d/add-my-static-arp With the contents: #!/bin/sh arp -i eth0 -s 192.168.0.4 00:50:cc:44:55:55 arp -i eth0 -s 192.168.0.5 00:50:cc:44:55:56 arp -i eth0 -s 192.168.0.6 00:50:cc:44:55:57 And then obviously add the permission to allow it to be executed: chmod +x /etc/network/if-up.d/add-my-static-arp And these arp entries will be manually added or re-added every time any network interface is brought up.

  Read the article

• Recovering files that do not appear in the Recycle Bin, but are in the $Recycle.bin folder on external drive

  - by Zach Morgan

  Problem: I have an NTFS external drive with a $Recycle.bin folder on the root (E:/$Recycle.bin/) that has about 70gb worth of data. For whatever reason, the folder is no longer a hidden system file and no Windows machine I have used the drive on will show the files in the actual Recycle Bin. What I Want To Do: I want to atleast view the recycle bin files from this external, and all of the help articles I have read just talk about deleting the folder all together. I plan on reformating the drive, but first I need to see if there are any important deleted files. What Didn't Work: Recuva - didn't see any of my files Resetting the external's Recycle Bin via command prompt and moving the old $Recycle.bin files into the new external $Recycle.bin folder (I didn't read this anywhere, just made it up on my own)

  Read the article

• The latest Oracle Social Network News from Open World

  - by me

  Highlights Oracle and Partners showcase the latest development around  Oracle Social Network  (OSN) Integration of OSN Social Fabric into Business Applications like Finance, HCM and Customer Experience Partners like Cisco WebEx, Avaya, Weemo, Lingotek and HarQen showcase OSN integration Oracle shares details around internal OSN deployment Please visit us at 2413 Moscone South  Exhibition Hall  and  experience a live OSN demo Social Fabric  Oracle Social Network socializes your Applications, Process and Content within your Enterprise. Here are some examples what is shown at Oracle Open World. Socialize the Finance department Enable Finance departments to collaborate instantly during quarter close with real-time information access Enable finance professionals in the back office to easily interact with the rest of the company Provide privacy when discussing sensitive financial results within Conversations  Socialize Human Capital Management (HCM) Promotes attainable performance goals that achieve the business objectives of the enterprise Capture expertise across the network Continuous feedback loop provided that results in productivity and innovation improvement tied to higher employee engagement OSN and Customer Experience Find the person with the best skills to assist with the issue Real-time collaboration in  context of the issue Track an Agent’s collaboration contributions Identify and contribute relevant knowledge back to the system Cisco/Webex integration The Web Conferencing tool of your choice can be integrated with OSN. In the example below you can see the integration of the Cisco WebEx solution into OSN. and sure - this works on mobile devices as well  OSN @ Oracle Oracle has deployed OSN as part of the internal Fusion CRM application rollout. After just 4 month we can see impressive usage patterns.

  Read the article

• Problems with wired ethernet connection Ubuntu 11.10

  - by Andrew Fielden

  After some partition shuffling, I've got a problem on my 11.10 system. The wired ethernet interface fails to come up, although the wireless interface is working. I'm using NetworkManager. I thought this may be a problem with NetworkManager, so I checked the config files, which look ok. I then tried re-installing the package, but this didn't resolve the issues. I'm not sure at this point if the problem is due to software configuration, or a hardware problem. I've also tried the cable in other router ports, but same problem. The symptoms are:- System settings - Network reports that the cable is unplugged (it isn't) ifconfig reports the following eth0 Link encap:Ethernet HWaddr f0:4d:a2:a2:a7:fe UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:792 (792.0 B) TX bytes:0 (0.0 B) Interrupt:46 Base address:0xe000 My /etc/network/interfaces file has the following: auto lo iface lo inet loopback My /etc/resolv.conf file has the following: # Generated by NetworkManager The router's red light is on for this port dmesg reports ADDRCONF(NETDEV_UP): eth0: link is not ready

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• Intermittent ethernet connectivity

  - by Amey Jah

  I am facing a weird problem. I am connecting to my dsl modem via ethernet. After booting, sometimes Ubuntu 10.10 does not detect the eth0 card properly or does not connect to the modem. I have made the following observations: My modem is fully on. All indicators are on except ethernet, which is blinking continuously. My network indicator applet informs me that I am connected to modem, but I am not able to browse as it has not established connection with modem. I need to power off and on (restart) the modem several times OR disconnect/connect (via network applet) several times, before the system can establish a connection with the modem. Once it establishes the connection, the ethernet LED (on modem) stops blinking and glows continuously. However, I do not see this problem every time I reboot or start my computer. 3/5 time, it connects to the modem in a single attempt. Friends, I am not able to understand root cause of this problem. Plus I do not know what kind of logs should be attached. If you want any logs please give me command to run, and I will paste the result for you. Note: I ran system testing when above problem happened. Follow this link to download result.

  Read the article

• Wifi - wireless network not working after installing Ubuntu 12.04

  - by Nilesh

  I had installed ubuntu 12.04 in my Dell Vostro 3460. Initially wired as well wireless both are not working. After installing compat-wireless-2012-07-03-pc.tar.bz2 wired network fine but wireless is not working. Previously both were working fine with ubuntu 11.10. Also presently both network are working fine in Win7. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) iwconfig: lo no wireless extensions. eth0 no wireless extensions. ifconfig: eth0 Link encap:Ethernet HWaddr 84:8f:69:d4:35:9b inet addr:10.24.22.72 Bcast:10.24.31.255 Mask:255.255.224.0 inet6 addr: fe80::868f:69ff:fed4:359b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15332 errors:0 dropped:0 overruns:0 frame:0 TX packets:10425 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:9262594 (9.2 MB) TX bytes:1572030 (1.5 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1432 errors:0 dropped:0 overruns:0 frame:0 TX packets:1432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145656 (145.6 KB) TX bytes:145656 (145.6 KB)

  Read the article

• my application did not show toast mesage when network is not available [closed]

  - by Smart Guy

  my application did no show toast message when network is disable if (position == 2) { final ConnectivityManager connMgr = (ConnectivityManager) getSystemService(Context.CONNECTIVITY_SERVICE); NetworkInfo activeNetworkInfo = connMgr .getActiveNetworkInfo(); android.net.NetworkInfo mobile1 = connMgr.getNetworkInfo(ConnectivityManager.TYPE_MOBILE); if (activeNetworkInfo == null) { Toast.makeText(LoginScreen.this, "No Active Network",Toast.LENGTH_LONG).show(); } else { if (activeNetworkInfo.isConnected()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { String pinemptycheck = pin.getText().toString(); String mobileemptycheck = mobile.getText().toString(); if (pinemptycheck.trim().equals("")||(mobileemptycheck.trim().equals(""))) { Toast.makeText(getApplicationContext(), "Please Enter Correct Information", Toast.LENGTH_LONG).show(); } else { showProgress(); postLoginData(); } } }); } else if (activeNetworkInfo.isConnectedOrConnecting()) { Toast.makeText(LoginScreen.this, "network is Connecting", Toast.LENGTH_LONG) .show(); else if (mobile1.isAvailable()) { btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View view) { showProgress(); postLoginData(); } }); } else if (!mobile1.isAvailable()) { Toast.makeText(LoginScreen.this,"No other Connection Found ",Toast.LENGTH_LONG).show(); btnLogin.setOnClickListener(new OnClickListener() { public void onClick(View v) { Toast.makeText(LoginScreen.this," No other Connection Found", Toast.LENGTH_LONG).show(); } }); }}}

  Read the article

• Network: Incoming connections work, outgoing fails

  - by anirvan

  i recently set up my own server at home to run Ubuntu 12.04 server ed. on booting up, i noticed that a message related to networking comes up, and the booting process pauses. the message read something like - waiting for network configuration and after a while - waiting another 60 seconds... on booting up, I realised that any command which requires a network connection was not working - ping, apt-get install, etc. on firing the ifup eth0 command, I get the error RTNETLINK answers: File exists. Failed to bring up eth0. I also realised, while searching the web for this problem, that this is probably one of the most common networking related issues - however, most of the questions are around setting up multiple IPs for the same machine. ifdown eth0 also fails, stating that eth0 is not configured. my /etc/network/interfaces file has a simple configuration for a static IP: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask xx.xx.xx.xx broadcast xx.xx.xx.xx gateway xx.xx.xx.xx dns-nameservers xx.xx.xx.xx The strangest part of this problem is that, while I can't connect to anything outside, I can ping to this particular server using the static IP configured in the interface file, and, i can even SSH into it! I'm really at ends here with this problem, and any guidance is much appreciated. Thanks!

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• How do I connect to a wireless network?

  - by Keith Groben

  I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

  Read the article

• Lost connectivity after configuring multiple network adapters on separate networks

  - by Dave Long

  I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

  Read the article

• Network(ing) to the Limit

  - by Oracle OpenWorld Blog Team

   By Karen Shamban While Oracle OpenWorld attendees are networking, there's an Oracle Global IT team that builds and maintains the massive networks that help run the show. The objective? To keep things running as seamlessly and smoothly as possible, constantly evaluate priorities, mitigate risk, and be ready for whatever might happen -- because things do happen when there are 50,000 plus attendees, tens of thousands of devices, unexpected requirements, and a constant flow of up-to-the-minute information. Here's just some of what it takes to keep the conference going, network style: 100 Oracle network, voice, and desktop engineers; security, risk management, and other IT experts, who come in from 17 countries  1000+ network switches 300+ miles of copper and fiber 485 wireless access points 2,500 wired laptops 300 VoIP phones And just where are all these networks and devices deployed? This is what the team had to build and manage: Moscone North, South, and West, including: The keynote hall Oracle DEMOgrounds in the Exhibition Halls Hundreds of session rooms Connection Centers, Social Avenue, Lounges Registration The Howard Street Tent and Taylor Street Cafe tented venues Oracle Square (Union Square) Yerba Buena Gardens Masonic Auditorium Sessions and demos at 8 hotel venues That's a whole lot of networking going on. And here's the kicker: the team has only 4 days to bring get it all up and running across these many venues, and exactly 12 hours to take it all down once the show ends. The Global IT team puts in the equivalent of 152 24-hour days for set-up, 227 24-hour days of support during the conferences, and then tears it all down in about 20 24-hour days. And in case you were wondering, the planning for next year's Oracle OpenWorld starts ... next week. No rest for the weary.  Now THAT's networking!  So hats off to the Global IT team -- the job ain't easy, but somebody's got to do it, and they do it remarkably well.

  Read the article

• Network/browser issues after upgrade to 12.04

  - by Reg

  I let my laptop upgrade to 12.04. And have no network afterwards. I went through all the articles I could find in google. Right now, I can ping google, and yahoo, but not cnn.com for example or anything else. Firefox says it can't reach google.com or gmail.com (or anything, not even IP. /etc/network/interfaces dns-nameservers 8.8.8.8 <<<<<added auto lo iface lo inet loopback /etc/dhcp/dhclient.conf #prepend domain-name-servers 8.8.8.8,8.8.4.4; prepend domain-name-servers 127.0.0.1; <<<<< tried both /etc/NetworkManager/NetworkManager.conf with and without dns=dnsmasq commented out. I can ping my wireless router and connect to it just fine. Have tried proxy/noproxy. This looks like After Upgrade to 12.04 - cannot connect to network but no answer there. I would hate to do a fresh install. Any assistance appreciated.

  Read the article

• Extra text shown on oveflow: hidden

  - by TRiG

  I'm keeping the main content area of the webpage small, so that footer navigation can be seen "above the fold". This is done by javascript setting the main content <div> thus: sec.style.height = '265px'; sec.style.overflow = 'hidden'; And then using javascript to insert a button to change the style back to normal: sec.style.height = 'auto'; The problem is that the cut-off point of 265px (dictated by the size of an image which I don't want to hide) doesn't quite match the gap between lines of text. This means that there the tops of tall letters show as funny little marks. Is there any way to hide text which is partially showing in a <div style="overflow: hidden;">? Edit to add: Full javascript var overflow = { hide: function() { var sec = app.get('content_section'); sec.style.height = '263px'; sec.style.overflow = 'hidden'; overflow.toggle(false); }, toggle: function(value) { var cnt = app.get('toggle_control'); if (value) { var func = 'hide'; cnt.innerHTML = 'Close « '; } else { var func = 'show'; cnt.innerHTML = 'More » '; } cnt.onclick = function() {eval('overflow.' + func + '();'); return false;}; cnt.style.cursor = 'pointer'; cnt.style.fontWeight = 'normal'; cnt.style.margin = '0 0 0 857px'; }, show: function() { var sec = app.get('content_section'); sec.style.height = 'auto'; overflow.toggle(true); } } if (document.addEventListener) { document.addEventListener('DOMContentLoaded', overflow.hide, false); } else { window.onload = function() {return overflow.hide();}; }

  Read the article

• Safari and Chrome back button changes hidden and submit values in forms

  - by OverClocked

  The following problem happens on both Safari and Chrome, so probably a WebKit issue. Page A: a page that requires you to login to see, contains a form that has a type=submit button, with name=submit, and value=a Page B: some other page Page C: ask user to login page, contains a form with a type=submit button, with name=submit and value=c User visits page A, then page B. Then idles and the user's login session times out. User hits back button to go back to page A. Browser redirects user to page C. On Safari and Chrome, when C is rendered, the form on page C has the type=submit button, name=submit, but value shows up as "a". If you reload while on page C, "c" appears as the value of the name=submit button. The same problem appears with type=hidden input fields; when user hits back button, their values are also changed to some other value from some other form. Also, this problem also shows up w/o the redirect, with just submit then back. In this case the previous page renders with incorrect values for hidden and submit CGI variables. So far the only fix I can come up with is use Javascript to reset the type=hidden and type=submit variable values, after page C loads, to make sure the values are correct. But that's not clean and universally applicable. Short of WebKit fixing this error, has anyone ran into a better workaround? Thanks.

  Read the article

• CSS:Hover's problem with text that is hidden because of overflow:hidden ?

  - by Michael Harringon

  In my application i have lots of divs containing text. All divs have overflow set to hidden so that the user does not see the text if the container is not large enough to contain the writing. If the user wants to see the hidden text they are supposed to mouse over the "box". The box then expands and shows the text. Sounds simple enough, right? Well i am having problems and the solution i tried did not work. The problem is that when the user mouses over the box, the text does indeed appears but stays really narrow and comes out of the bottom box, the sameway it would if overflow was set to visible. below is the standard css applied to the div box: .newevent { overflow: hidden; z-index: 0; } I Tried to fix this by setting a hover trigger, when it is activated the box widens, i thought that this would then mean there would be more space to display the text, below is the hover effect: .newevent div:hover { width: 200px; padding: 50px; background-color:#D4D4D4; border: medium red dashed; overflow: visible; z-index: 1; } How do i go about "redrawing" the text when it is hovered over, so that the text can use the new widened area rather than behaving as it is still in a narrow box.

  Read the article

• [c++] accessing the hidden 'this' pointer

  - by Kyle

  I have a GUI architecture wherein elements fire events like so: guiManager->fireEvent(BUTTON_CLICKED, this); Every single event fired passes 'this' as the caller of the event. There is never a time I dont want to pass 'this', and further, no pointer except for 'this' should ever be passed. This brings me to a problem: How can I assert that fireEvent is never given a pointer other than 'this', and how can I simplify (and homogenize) calls to fireEvent to just: guiManager->fireEvent(BUTTON_CLICKED); At this point, I'm reminded of a fairly common compiler error when you write something like this: class A { public: void foo() {} }; class B { void oops() { const A* a = new A; a->foo(); } }; int main() { return 0; } Compiling this will give you ../src/sandbox.cpp: In member function ‘void B::oops()’: ../src/sandbox.cpp:7: error: passing ‘const A’ as ‘this’ argument of ‘void A::foo()’ discards qualifiers because member functions pass 'this' as a hidden parameter. "Aha!" I say. This (no pun intended) is exactly what I want. If I could somehow access the hidden 'this' pointer, it would solve both issues I mentioned earlier. The problem is, as far as I know you can't (can you?) and if you could, there would be outcries of "but it would break encapsulation!" Except I'm already passing 'this' every time, so what more could it break. So, is there a way to access the hidden 'this', and if not are there any idioms or alternative approaches that are more elegant than passing 'this' every time?

  Read the article

• What type of objects can be sent back to an action Method using HTML.HIDDEN()

  - by Richard77

  Hello, 1)Let's say I've this form: <%Using(Html.BeginForm()){%> <% = Html.Hidden("myObject", (cast to the appropriate type)ViewData["KeyForMyObject"]%> <input type = "submit" "Submit Object"> <%}%> 2) Here's the Action which's supposed to intercept the value of the object public ActionResult MyAction(Type myObject) { //Do Something with the object } Here's my question: What type of objects the Hidden field can support? In fact, when ViewData["KeyForMyObject"] contains a string, int, or bool, myAction is able to retrieve the value. But, when it comes to objects, such as List, and dictionary, nothing happens. When I debug to check the local values, I see null for Type myObject in the MyMethod. So what are the rules in MVC when it comes to a List or Dictionary? ================================= EDIT To make things simpler, can I write something like this <% = Html.Hidden("contactDic", (Dictionary<string, string>) ViewData["contacts"])%> and expect to retrieve the dictionary in the action Method like this public ActionResult myMethod(Dictionary<string, string> contactDic) { //Do something with the dictionary } Thanks for Helping

  Read the article

• Display a jQuery Dialog/Popup, then set a hidden field using the result of the dialog

  - by Dan Harris

  The Problem I have a page with a form on. It has a hidden field called: generic_portrait I want the user to click a link "select portrait" This will open a Dialog/Popup using jQuery, based on a dropdown completed earlier in the form. If the value of the dropdown called "gender" is "male" then show male options, if "gender" is set to "female" show female options. Each portrait has a radio button, each with a name assigned "male1", "male2" etc Depending on the radio button selected in the popup, I want the hidden field to be set to match this. The Questions What is the best way to show a dialog/popup using jQuery, different depending on a dropdown box on the page. Use Javascript to see what is selected, then show a corresponding Div? I can do the check to see what the dropdown is set to using jQuery, but how can I then shown a specific popup based on that? Once i've popped it up, how do I take the value assigned to the selected radio box, and set the hidden field called "generic_portrait" to this value. Why i'm asking Normally I would figure this out myself, as i'm sure it's not that difficult, but I don't use Javascript and/or PHP very often, and this is due for a client urgently. So I would really, really appreciate some help on this one. Thanks for all replies in advance.

  Read the article

• IE showing hidden div under certain circumstances

  - by karola

  After googling around and finding a lot of ie bugs I still did not find a description of the problem I have. The initial situation is a standard one. We have a tooltip which is actually a hidden div that will be displayed on mouseover at a given location. The div is hidden with display:none and contains a table with the content. We tried different libraries for showing the div (scriptaculous and jQuery Cluetip) but the effect is the same. The problem: Everything is fine as long as the contents fits the width of my window. But when I resize it until the horizontal scrollbar is activated the content of the hidden div will be shown at the end of the page when the tooltip is activated. This is really strange as it happens only under these premises. When more than one tooltip is involved the browser might even crash (and under Vista takes the whole system with him duh). I know it's a bit complicated to explain but I hope that someone at least had heard of that bug and can point me into the right direction.

  Read the article

• Hidden DNS master only sending notify to one slave

  - by Rob

  My hidden DNS master is only sending notifies to one of the name servers for a zone I have 3 named servers ns0,ns1 & ns2 all running bind 9.7.3.dfsg-1ubuntu4.1. When an update is processed the master (ns0) seems to behave normally. ns0 (192.168.2.50) zone domain.org/IN: sending notifies (serial 2012060703) client 192.168.2.52#42892: transfer of 'domain.org/IN': AXFR-style IXFR started: TSIG rndc-key client 192.168.2.52#42892: transfer of 'domain.org/IN': AXFR-style IXFR ended ns2 (192.168.2.52) client 192.168.2.50#3762: received notify for zone 'domain.org': TSIG 'rndc-key' zone domain.org/IN: Transfer started. transfer of 'domain.org/IN' from 192.168.2.50#53: connected using 192.168.2.52#55747 zone domain.org/IN: transferred serial 2012060704: TSIG 'rndc-key' transfer of 'domain.org/IN' from 192.168.2.50#53: Transfer completed: 1 messages, 34 records, 1028 bytes, 0.001 secs (1028000 bytes/sec) Nothing happens on ns1. I've turned up the logging level but there's no information in syslog about the actual name servers bind has sent notifications to so I guess this is something it doesn't log. I've also tried watching tcpdump, it never makes any attempt to notify ns1 only ns2 192.168.2.50.56278 > 192.168.2.52.53: [udp sum ok] 56418 notify [b2&3=0x2400] [1a] [1au] ? SOA? domain.org. domain.org. [0s] SOA ns1.domain.net. dnsmaster.domain.net. ? 2012060801 10800 3600 604800 3600 ar: rndc-key. ANY [0s] TSIG hmac-md5.sig-alg.reg.int. fudge=300 maclen=16 origid=56418 error=0 otherlen=0 (174) the authoritive zone has both ns1 and ns2 records $ORIGIN domain.org. $TTL 3h @ IN SOA ns1.domain.net. dnsmaster.domain.net. ( 2012060801 ; Serial yyyymmddnn 3h ; Refresh After 3 hours 1h ; Retry Retry after 1 hour 1w ; Expire after 1 week 1h ) ; Minimum negative caching of 1 hour @ 3600 IN NS ns1.domain.net. @ 3600 IN NS ns2.domain.net. // Edit I have added also-notify {192.168.2.51;192.168.2.52;}; explicitly to the zone file and it all works fine, both ns1 and ns2 get notify messages and transfers succeed. I was under the impression bind would automatically send notifies to all NS records on a zone, maybe it's bugged?

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >