Search Results

Search found 10181 results on 408 pages for 'installation'.

Page 54/408 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • How do I install Ubuntu 13.10 from a partition on my Mac?

    - by Barry
    I am trying to install Ubuntu 13.10 on my Macbook Air. I've previously had no issue installing from a USB stick to this machine. However, I don't currently have access to a USB stick or any external media at all! What I've done so far is partitioned my SSD into 3 partitions. One holds OS X, another is a 5gb partition intended for the install ISO, and a third is intended to be the target for that install. The second two partitions are formatted as FAT. I've used dd (with and without bs=1m) to "burn" my ISO to the small 5gb FAT partition. I also at one point tried using hdituil to convert my ISO file to IMG and went through the same process with same result below. After "burning" my ISO to the small partition, I reboot into Refind. Refind sees my small 5gb partition perfectly well, and when I select that partition it loads GRUB appropriately. However, from here, regardless of what I choose, Ubuntu will start to load and then after a few minutes crash out to: BuzyBox V1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built in commands. (initramfs) unable to find a medium containing a live file system. I've Googled this error and found a number of people encountering it when trying to install from USB, but no solutions seem applicable to my case (installing from a partition on my SSD, to another partition on my SSD). Is there any solution to this, or do I just need to wait a few days until I have access to a USB stick? Many thanks in advance, and apologies for length -- I figured I'd err on the side of being exhaustive rather than having people suggest things I've already tried.

    Read the article

  • Is Grub installed when Ubuntu is the only OS installed?

    - by Dennis
    I have a simple question concerning Grub. When Ubuntu it's the only system installed on a machine, Grub doesn't appear when the computer it's turned on, my question is: When Ubuntu is the only system, Grub it's not installed on MBR? I has this doubt when I tried the ASPM command in Grub, to see if it could save some battery on my notebook, and the difference was only 0.4W. I don't even know if it made some effect or it's just a normal oscilation. Thanks.

    Read the article

  • Unable to boot ubuntu 11.10 from external usb drive

    - by user45006
    I'm new to Ubuntu (and actually all things Linux) as of this morning, so please excuse any stupid mistakes I may be making. I recently bought an external hard drive for my newly built PC (that is running windows 7 if it matters). I would like to install Ubuntu onto the external drive and boot from there. I downloaded Ubuntu 11.10 and made a bootable cd, unplugged my internal HDDs, plugged in the external drive, installed Ubuntu 11.10 on the external drive via the installer, and replugged in my internal HDDs. Then I set my bios boot order to: Boot from USB-HDD - Boot from Hard Disk - Boot from CD/DVD. Now when I restart I get the message "Starting Operating System..." (or something like that, I forget exactly what it says) that lingers on the screen for a moment and then windows starts. Any idea what the problem may be? ~Relevant info~ BIOS version: Award Software International, Inc. F2, 2/22/2011 Ubuntu Version: 11.10 External Hard Drive: Western Digital My Passport Essential 500GB Portable Hard Drive (Black) ~Things I've already tried~ 1) Unplug internal HDDs so that only external drive was plugged in via usb. Same thing happened only obviously my BIOS could not detect any hard drives besides the external one. When booting received error "Could not detect operating system" 2) Formatted external hard drive and re installed. It didn't make a difference, however interestingly when I booted from cd the ubuntu installer said it detected ubuntu 11.10 on the external hard drive. 3) Within BIOS I've messed around with every boot order combo I could think of both in the "Hard Disk boot order" screen and the "Boot order" screen. I'm a little confused of why there are two screens for this. 4) Held F12 during startup which opens (what I think is) the one time boot screen and it gave me the options "Hard Drive", "cd/dvd", "USB-FDD", "USB-cdrom", "USB-HDD", and "USB-something else I can't remember what it was". I tried all of them, but the same thing as before happened each time. ~References~ I noticed several people on askubuntu have tried to do something similar if not the exact same. In fact, I even found a post that pretty much outlines step by step exactly what I did... only their's worked. /jealous. Linky: Install Ubuntu or Kubuntu on a External USB Drive I'm willing to try a different version of ubuntu - it's not like my heart is set on 11.10, but it's a pain to open my case and unplug my internal hard drives so I'd prefer not to do this unless someone is reasonably confident it'll work. Thank you for all of your help in advance! I'm really looking forward to exploring Ubuntu!

    Read the article

  • How to set up an inter-OS partition?

    - by Confuzzled Persun
    I need a working partition configuration for use and accessibility on both Ubuntu and Windows. I have an 8GB USB flash drive onto which I am installing Ubuntu 11.10 so that I can have a personal bootable OS wherever I go. I've installed Ubuntu several times, but I just can't seem to get this one partition right. This is my own configuration: Partition 1: Primary - 200MB - Beginning - Ext4 - /boot Partition 2: Primary - 1300MB - End - swap area Partition 3: Logical - 5200MB - Beginning - Ext4 - / Partition 4: Logical - 1258MB - Beginning - Ext4 - /home Partition 5: Logical - 42MB - End - FAT32? - /windows? What I want to do is to get partition 5 configured so I can access it on both the installed Ubuntu system and a Windows system (when the USB drive is connected while Windows is booted). Basically, what I want is Ubuntu installed on the USB drive along with a partition that I can access with other operating systems. I'm thinking I just need the technical configuration of "Use as:" and "Mount point:" for my final partition. But I don't know. Any help with this is appreciated. And any other tips are appreciated as well.

    Read the article

  • Partitions are gone after installing ubuntu 13.10

    - by Chaitanya
    I have installed Ubuntu 13.10 today. I selected it to overwrite my windows 7 operating system. However, after booting up Ubuntu I saw that my partitions are gone and all the space is showing up us in one partition. Why is this happening? Have I done something wrong while choosing to overwrite windows 7? I understand that while overwriting windows 7 it will format my C: drive there, but why my other partitions are gone? Is there any way that I can get my data back?

    Read the article

  • How do I load Ubuntu using Netboot?

    - by Michaeljwjr
    I've been reading through the different options and through the wiki but was wondering which option would be the best for me? I have a tower that was running Windows XP from a friend, and want to load Ubuntu onto it. The boot options are Network Boot, Floppy, CD-ROM, Hard Drive. No USB option. Phoenix - AwardBios Core Version V6.0, BIOS Revision 3.11 5/17/2004 256 mb pc2700 I have my desktop running Ubuntu, but need to know how to get Ubuntu onto that tower. Which is my best option, and what do I download to get it set up properly? Any advice towards a Netboot would be amazing. Thank you in advance.

    Read the article

  • I cant install ubuntu 12.04 on my dell latitude d510

    - by Jose de Jesus
    I download the iso from Ubuntu.com and burned into a CD-R with the program in the page. The disc work right in my desktop but when i run it in my laptop appears another menu with the options prove ubuntu, install ubuntu, check the memory, check for errors, and run windows.When i try the option install appears in the screen "Ubuntu" in the center and littles points down (loading) and after 5 minutes the computer freeze. What can i do?

    Read the article

  • Ubuntu unstable, showing awkward behavior

    - by Christophe De Troyer
    Let me start off by saying that this problem can't be described in such a way that allows me to find other topics, which have some relevance to this problem. That's why I created this question. In case this question might have been asked before, I apologize. So what is the problem: My computer (Intel Core I5 2500K - with HD3000 graphics -, 6 gb DDR, 1 SSD, 3 HDD's and an Asus P8Z68 mobo) runs Windows on the SDD. But I decided to give Ubuntu a chance to be my daily OS for basic needs since it's open source and I find it a handicap of not being able to work with it. I decided to run the windows installer and install Ubuntu 12.04 to my 320 Gb hdd which was not being used in my computer. After installing it and booting it, it worked great! I spent the rest of the day/night using it, and falling for it. Great, today I booted Ubuntu (I had the choice in the bootloader as I expected). It asked me for my login and it started logging in. Now, after a few (literally) minutes of letting it "boot" I tried determining the cause of this. What I've figured out so far: When I left click on my desktop it freezes completely for a few seconds I have something like tearing in the left side menu (in games, you know) when I move my mouse around It runs well when just hovering around with my mouse, but from the point I click on something it freezes. What have I tried? I ran a HD Tune diagnostic on the HDD but the performance seems to be very close to the stock values, so I'm taking it as a good HDD. I'm trying to get to the drivers update panel for Ubuntu, but with the state it's in, it's taking a lot of time.. Could anyone point me in a direction for troubleshooting this? I'm not really a noob at all, just when using Linux.. :) Thanks in advance! Christophe,

    Read the article

  • have a missing file, and cant run ubuntu upon start up, and hasnt the flash drive i used didnt work either, any help?

    - by trent
    when I first downloaded Ubuntu to install it, it downloaded quick and caused no problems to my laptop. but then when it came time to install it as one of my operating systems, it wouldn't run because it said a file was missing or damaged. so then I uninstalled it and re-installed it but I still had that same problem. so I tried a flash-drive version but that didn't work either because it wouldn't boot from that, nor would it detect my flash drive, (in this case, an old 4 GB mp3 player). any help or tips and ideas would be great, I just need a decent operating system because windows is getting to be terrible at the moment, just note I wanna run Ubuntu along side windows 8.1

    Read the article

  • Trouble installing Pokerstars on a Live USB without Persistence through WINE

    - by Ricky Foster
    I need to install any form of Texas Hold Em' on a Lubuntu Live USB that doesn't have persistence. I was able to download PokerStars.net by emulating the .exe (a windows type file) using WINE for Linux (Lubuntu). But, when I try to install, I have no room. The only place on the Live USB is in the root folder which is set to read-only. Is there any way I can change the read only properties of the Live USB while it's in use? So, to recap. I am running Lubuntu 13.04 and can't start in Persistent mode. When I start normally everything worked fine. I proceeded to Chromium and successfully downloaded Wine and the Pokerstars.exe. I right clicked the downloaded fiel then clicked Wine, the installer loaded fine. There are about 8 different disk icons and only the one containing system files is active. Is there any way I can use the terminal to install it to Root. Thanks in advance for your answer/alternate method (without having to buy another USB to install it to).

    Read the article

  • Installing software on an offline Ubuntu server

    - by Muhammad Gelbana
    Assuming that I have a server with Ubuntu server newly installed on it. I was thinking of installing the very same version on Virtual Box (Or any other virtualization software), connect it to the internet and use apt-get to only download the packages for upgrading the system and the new software such as (tomcat7, openjdk6-default-headless..etc). Then copy the downloaded packages from the archive folder to the offline server's archive folder through a USB stick. So now the virtual system won't actually be upgraded nor have any new software installed. But would running the very same apt-get commands on the offline system without the download directive -d be executed without issues ? *EDIT:*This needs to be as simple as possible because I'll have to write a guide for our client to do this on his own and so it won't be acceptable to require deep Linux knowledge to do this.

    Read the article

  • New Dell Vostro 3550 will not boot into Live CD

    - by rich97
    I've been trying to install Ubuntu and/or it's derivatives on my new Dell Vostro 3550 but I'm finding it impossible to boot into the live CD environment. Here are the things I've already tried: Booting from multiple versions of multiple distributions (Ubuntu 10.10, Ubuntu 11.04, Mint 11, Mint 10) Booting from a Live USB created with unetbootin, the Linux Mint startup disk creator, the universal USB creator and dd of=linuxmint.***.iso if if=/dev/sdx. Burning a CD and booting from the internal CD drive. In the case of the USB keys with the latest versions of Ubuntu it gets to the page where I can select a boot option, but after selecting an option the screen goes black, even the back light turns off. With the older distributions the screen stays on but it starts loading and then just hangs. The CDs don't even try to boot. It starts spinning but then falls back to the default Windows install. The only way I've got it to work so far is with Wubi, but that's hardly ideal. I'd like to have two separate physical partitions with a /home and /. Any help is appreciated. Thank you.

    Read the article

  • Is it possible to extend partition in which I have installed Ubuntu

    - by Santosh
    Before installing my current Ubuntu Oneiric Ocelot I was having 3 partitions on my hard drive (each in NTFS, and divided in 21GBs, 10GBs and 37GBs; approx 80GB). I put in the DVD in DVD-ROM and booted up with it. I was prompt whether to install Ubuntu side by current operating system (Windows 7) or totally remove all operating system. I choose to install side by the current operating system. In next screen I took one of my partition (the one which was of 37GB) and totally formatted it. Then created a ext4 file system of 10GBs on it (here 'it' means partition that was of 37GB, not whole HDD). While proceeding I was asked to make swap partition so I created another swap partition of 5GBs. I have Ubuntu installed, but now I am regretting about that 10GB, I should have done it more since I have much more space on my hard drive. And I have 22GBs of my hard drive useless (neither it is in ntfs nor ext4). I want to increase the size of ext4 partition in which I have installed my Ubuntu; from 10GB to something more.

    Read the article

  • Problems installing Ubuntu server and desktop

    - by Rufus
    google translate Good afternoon I'm new to linux, I have to install a proxy and to them I decided on Ubuntu, the problem is that it took several days trying to install Ubuntu on any version and when installing i get error [Errno 5] input / output error says that is because the disc (cd or dvd) is bad or faulty change it and save all denuevo but I get the same error try changing the hard drive to see if my drive had no problem and I also get the same error , the machine where I want to mount the Ubuntu is a P4 with 1GB rAM and 40GB disk is more than the minimum requirements for even so I get the error ... I would like someone could help me thank you very much ..... original Problemas al instalar Ubuntu server y desktop Buenas tardes soy nuevo en linux, tengo que instalar un proxy y para ellos me decidi por Ubuntu, el problema es que llevo varios dias tratando de instalar Ubuntu en cualquiera de sus versiones y al momento de instalar me sale error [Errno 5] input/output error dice que se debe a que el disco (cd o dvd) esta malo o defectuoso lo cambie y grabe todo denuevo pero me sale el mismo error trate de cambiar el disco duro para ver si no tenia problema mi disco y tambien me sale el mismo error, la maquina donde quiero montar el Ubuntu es un p4 con 1gb ram y disco de 40gb, es mas de los requerimientos minimos por aun asi me sale el error... me gustaria que alguien me pudiera ayudar muchas gracias.....

    Read the article

  • How do I install packages like Oracle Java?

    - by Sean
    I've been trying to install various things, and I need some packages that just aren't showing up in Ubuntu's Software Center. In fact, no packages are showing up there, just whole programs. I need to install sun-java6-jre for some of these things, but it's simply not in the Software Center. I had Ubuntu last year (and due to various circumstances, had to get rid of it shortly thereafter) and these things were there then. So why can't I find them now?

    Read the article

  • install wireshark 1.8.3 in ubuntu 12.04

    - by gene
    To enable capture traffic on multiple interfaces at once, I tried to install wireshark 1.8.3. However, I encountered the following errors: capture-pcap-util.c:274:1: error: static declaration of ‘pcap_datalink_name_to_val’ follows non-static declaration /usr/local/include/pcap/pcap.h:326:5: note: previous declaration of ‘pcap_datalink_name_to_val’ was here capture-pcap-util.c:289:1: error: static declaration of ‘pcap_datalink_val_to_name’ follows non-static declaration /usr/local/include/pcap/pcap.h:327:13: note: previous declaration of ‘pcap_datalink_val_to_name’ was here After doing some search, I found someone can fix it by reinstall libpcap-dev, or the following commands: step 1:rm & rmdir any file in '/usr/include/pcap';'/usr/local/include/pcap' step 2:Download libpcap by 'sudo apt-get install libpcap0.8-dev' step 3:./autogen.sh in wireshark dir step 4:make clean & make & make install However, neither is working on ubuntu 12.04/wireshark 1.8.3 Anyone can help?

    Read the article

  • problem in installing wireshark on ubuntu 12.04

    - by iqbal
    i tried to install wireshark on ubuntu 12.04 but when i enter the cod the message is whone to me is iqbal@iqbal-HP-ProBook-4530s:~$ sudo apt-get install wireshark Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wireshark : Depends: wireshark-common (= 1.11.4+svn20140420104827~d0489f2a-0ubuntu1~precise1~ppa0) but it is not going to be installed E: Unable to correct problems, you have held broken packages so how can i install wireshark on ubuntu 12.04 if any one can please tell me thanks

    Read the article

  • Problems with Ubuntu and AMD A10-4655M APU

    - by Robert Hanks
    I have a new HP Sleekbook 6z with AMD A10-4655M APU. I tried installing Ubuntu with wubi--the first attempt ended up with a 'AMD unsupported hardware' watermark that I wasn't able to remove (the appeared when I tried to update the drivers as Ubuntu suggested) On the second attempted install Ubuntu installed (I stayed away from the suggested drivers) but the performance was extremely poor----as in Windows Vista poor. I am not sure what the solution is--if I need to wait until there is a kernel update with Ubuntu or if there are other solutions--I realise this is a new APU for the market. I would love to have Ubuntu 12.04 up and running--Windows 7 does very well with this new processor so Ubuntu should, well, be lightening speed. The trial on the Sleekbook with Ubuntu 12.10 Alpha 2 release was a complete failure. I created a bootable USB. By using either the 'Try Ubuntu' or 'Install Ubuntu' options resulted in the usual purple Ubuntu splash screen, followed by nothing...as in a black screen without any hint of life. Interestingly one can hear the Ubuntu intro sound. In case you are wondering, this same USB was trialed subsequently on another computer with and Intel Atom Processor. Worked flawlessly. Lastly the second trial on the Sleekbook resulted in the same results as the first paragraph. Perhaps 12.10 Beta will overcome this issue, or the finalised 12.10 release in October. I don't have the expertise to know what the cause of the behaviour is-the issue could be something else entirely. Sadly, the Windows 7 performance is very good with this processor-very similar and in some instances better to the 2nd generation Intel i5 based computer I use at my workplace. Whatever the cause is for the performance with Ubuntu 12.04 or 12.10 Alpha 2, the situation doesn't bode well for Ubuntu. Ubuntu aside, the HP Sleekbook is a good performer for the price. I am certain once the Ubuntu issue is worked on and solutions arise, the Ubuntu performance will probably be better than ever.

    Read the article

  • lubuntu DVD not boot

    - by tuxi
    I downloaded from first link on http://lubuntu.net/ Burned a DVD with CD Burner XP in another PC , and at the main computer changed BIOS boot setting to look at CD DVD driver first. Now at the main computer there is an old Ubuntu 8 Hardy Heron. There is no direction when i put new burned DVD at DVD driver. Where am i wrong? Is there something that i misunderstand, for example lubuntu is really an OS which can be installed on harddisk?

    Read the article

  • System in low-graphics mode

    - by Artem Moskalev
    I am totally new to Linux, and Ubuntu. I bought ASUS X53E Notebook, erased Windows and installed Ubuntu. First it worked ok. Then when I started working with it, i opened the terminal, entered sudo chmod 666 usr and then all the icons from the main panel disappeared + the whole system stopped responding. I decided to restart the system. When restarted, a message appears: the system is running in low graphics mode and below it: Your screen, graphics card and input device setting could not be detected correctly. You will need to configure it yourself. But the "OK" button is disabled and if I press any buttons nothing happens. If I enter Ctrl-Alt-F2 it opens the bash terminal. But there commands sudo or apt-get are not found and it says that permission denied if i try to enter any folder like cd /usr If I enter the su command it asks for the password I don't know. When encountering this problem first, I reinstalled the whole Ubuntu. but today it happened again just the same. What shall I do? maybe there is something wrong with the hardware? If I need to install another distribution of Linux could you recommend one? but I'd rather stick to Debian releases like Ubuntu. so how do I fix the problem? PS: Please give answers in simple terms because am a newbie so i don't know what goes where yet.

    Read the article

  • Timeout when trying to install ubuntu 12.04

    - by Oskars
    When i click on "try ubuntu" after booting it from a USB the screen goes black and a lot of text comes out. But after a while it says "timeout: killing /blablabalba" or something like and it just keep on saying that. What have I done wrong? <.< My computer is a Acer ASPIRE M5201 if that is of any importance. Edit: I noticed now that before it says "timeout" it says something about not supporting "DNS" or "Asn" or something like that. I'm not sure if it was exactly dns and asn but do this mean that I can't run ubuntu on this computer? Edit2: The exact strings are: "[sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA " "timeout: killing '/sbin/modprobe -bv pci:v00001002d00"(and more nubmers wich I didn't catch)

    Read the article

  • Ubuntu 12.10 install stuck at first step

    - by Josh Clarke
    I'm trying to install Ubuntu 12.10 from a DVD-R disk, and everything is just fine until I get to the first window after clicking "Install Ubuntu" I checked the box "Download updates while installing" and also the "Install third-party software" box. After clicking next, however, the install just hangs there. I've been waiting for over an hour now and all I see is the mouse cursor showing that it's "loading". What should I do to get past this? Thanks!

    Read the article

  • 12.04 "Try Ubuntu without installing" results in graphical artifacts on MacBook

    - by ubuntukeks
    I am trying to bless my MacBookPro 5,3 (Unibody/Core2Duo/Nvidia 9400M+Nvidia 9600M GT) with Ubuntu 12.04 (already got rEFIt running), but every time I select Try Ubuntu without installing, it will lock up and always give me the same coloured graphical artifacts all over the screen. Whether I use a CD-ROM or a USB Stick, it does not change a thing. Is there anything else that can be done or am I stuck for now?

    Read the article

  • No boot record when installing 13.04 from USB on WinXP

    - by Phil Leslie
    I'm replacing WinXP with 13.04 on an older PC using wubi.exe on a USB stick. I had no problem changing the BIOS on another system that was a bit newer but when I change the settings on the older PC to boot from USB, I get a DOS message saying "Searching for boot record...Not found" & asked to try again. I don't have the ability to boot from a live CD so is there a reason why I can boot from a USB on a newer computer but can't from an older one? Both have options to choose to boot from USB, but the older one can find no boot record. The system was built on 12/13/01 by American Megatrends. Since I don't have enough "reputation points" to post the screen shot image, you can see it at http://img.photobucket.com/albums/v633/boonevillephil/1029131748-00.jpg.

    Read the article

  • When attempting to install ubuntu 12.04 from CD, I am stuck on black streen with "loading bootlogo..."

    - by Jessica K
    I downloaded Ubuntu 12.04 to my desktop and burned to a CD using Infra Recorder and instructions on ubuntu website. Restarted PC to boot from CD receive black screen with "Loading bootlogo..." then nothing happens and I have to restart with windows. The CD seems to be correct. Folders include .disk, boot, casper, dists, install, isolinux, pics, pool, preseed, autorun file, md5sum text file, readme.diskdefines file, wubi app. System Information Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.120824-0336) System Manufacturer: TOSHIBA System Model: Satellite L305 BIOS: Default System BIOS Processor: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (2 CPUs), ~1.9GHz Memory: 3062MB RAM Page File: 1553MB used, 4772MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found DxDiag Version: 7.00.6002.18107 32bit Unicode Drive: D: Model: PIONEER DVD-RW DVRKD08L ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.00.6002.18005 (English), 4/11/2009 00:39:17, 67072 bytes

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >