Search Results

Search found 2866 results on 115 pages for 'magic quotes'.

Page 54/115 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Ubuntu on an XPS 14 Ultrabook with mSATA cache and 500GB HD - how to partition for dual boot?

    - by JDS
    I am getting an XPS 14 ( http://www.dell.com/us/p/xps-14-l421x/pd ) and I want to dual-boot Windows and Ubuntu. This thing has a 500GB standard HD and a 32GB mSATA that can be used as cache. Does anyone know how this thing is partitioned? Is the OS installed on the mSATA drive and data is on the big HD? Is there a BIOS controller or maybe even a Windows driver that makes the mSATA drive and 500GB HD appear contiguous? I get the impression that something makes the mSATA be used invisibly as cache, but I can't find any technical documentation how that works. My primary concern here is wrt dual-booting Ubuntu. I want to know if I need to partition the mSATA separately, or the big HD, or just partition the "magic" contiguous disk space that appears available to the OS.

    Read the article

  • What would happen if I did a "Boot to VHD" to a VHD that was configured to run under Hyper-V?

    - by tbone
    Microsoft has a Hyper-V based VM I'm interested in running, however, I don't have access to a Windows Server 2008 machine to try it on, only a Windows 7 Pro x64 machine (Windows 7 does not support Hyper-V). This is the VM in question: This download contains three Windows Server 2008 R2 SP1 Hyper-V Virtual Machine set for evaluating and demonstrating Office 2010, SharePoint 2010 and Project Server 2010. 2010 Information Worker Demonstration and Evaluation Virtual Machine (SP1) http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=27417 I came across a somewhat relevant article from Scott Hanselman: Less Virtual, More Machine - Windows 7 and the magic of Boot to VHD: http://www.hanselman.com/blog/LessVirtualMoreMachineWindows7AndTheMagicOfBootToVHD.aspx I realize other options are to convert this VM to a VMWare compatible VM or some of the options to run it under VirtualBox. But instead of those routes, I'm wondering: What would happen if I tried to go the "Boot to VHD" route using this Hyper-V VHD? Is it possible that during the boot process, Windows would simply notice that hardware had changed and adjust accordingly, installing the appropriate drivers and continuing on without a hitch?

    Read the article

  • No picture on HDMI Output from a Pioneer 921 AV Receiver to a Projector

    - by Alexey Kulikov
    I am trying hard to tackle a what seemed to be simple problem if wiring my setup together. The setup: Mac Mini (2011) with HDMI Output Pioneer 921 K AV Receiver Acer HD Projector (HDMI) When I hook up my Mac Mini directly to the Projector with a 30 foot (10 meter) HDMI Cable everything is just fine. The picture is sharp and the colors brilliant. However, when I send HDMI to the receiver (into the BD HDMI Input) then I get absolutely no HDMI output to the projector, it keeps saying "no signal". Is there perhaps some magic combination of setup buttons that may help me resolve this problem?

    Read the article

  • Take Complete Image of CRM Server Application

    - by nicorellius
    I have heard of snapshots or ghost images like this. But I have never used this kind of tool to actually clone a piece of hard drive. I think Norton Partition Magic can do something like this as well, but haven't tried it. So my question is this: How can I duplicate a CRM server application exactly so that I can transfer it to another system? I have a CRM server running LAMP (Linux, Apache, MySQL, and PHP) and I urgently need to transfer these data to another system without actually installing, configuring the dependencies and then doing the same for the software itself. Has anyone done this or does anyone know how to do this?

    Read the article

  • How to best config my PC. 2 small SDDs and a 1TB conventional drive

    - by Chadworthington
    I just got a new PC. It has 3 drives C Drive: 80GB SDD Drive P Drive: 120GB SDD (for core programs) D Drive: 1TB SDD (for data and other) I have an MSDN subscription and I am the type of person that loves to install tons of software to check it out. I am very worried that installation programs are forcing me to place a large amount of files on the small C drive. I fear that I will quickly run out of space on my C drive while having ample space on my TB drive. What would you do in my shoes? I didn't select this PC or set the config up. I am wishing that the 120 SSD was my C, to give me a little more room to grow. I guess there are no magic solutions here but I am just looking for your general thoughts

    Read the article

  • How should I capture Linux kernel panic stack traces?

    - by Alnitak
    What's current best practice to capture full kernel stack traces on a Linux system (RHEL 5.x, kernel 2.6.18) that occasionally panics in a device driver? I'm used to the "old" SunOS way of doing things - crash dumps get written to swap, and on reboot the dump gets retrieved in the local file system. man 8 crash refers to diskdump, but that appears to be unsupported. and/or deprecated. I've played with kdump, but it's unclear whether I can get a stack trace from that. Triggering a panic via Magic SysRq didn't create one. It also seems wasteful to reserve so much memory (128MB) just for a kexec crash recovery kernel.

    Read the article

  • Computers on preexisting Windows 2008 domain accepting accounts from Samba3/4 domain

    - by Ivan Vucica
    I have a web application written in PHP where I would like to allow existing users to log into Windows computers, too. Re-hash of their passwords is doable (by requesting them to change the password). And to solve desync of passwords, I intend to have webapp authenticate users primarily against the domain. I don't want to give webapp users accounts on the existing domain, which we can call example.local. Instead, I want to provide them accounts on a new domain, let's call it webapp.example.local. From some research I have done, setting up a Samba4 domain and joining computers into this webapp.example.local domain would be one way to allow webapp users to log in. But, the computers should be members of the example.local domain. How can I get computers that are members of and are authenticating against Windows 2008-based example.local to also authenticate users against webapp.example.local? Magic keywords seem to be "trust relationship", "forest", etc, but at this point I haven't found a concrete example on how to establish this trust.

    Read the article

  • Can I run my MacBook in clamshell mode without being connected to power?

    - by kch
    Hi, At home, I run my MacBook in clamshell mode (closed lid, external display). This works fine when you're connected to the power adapter, but it doesn't work when running on battery. That's how it's supposed to be and Apple has some kb entry on the issue. But it's also lame. You can prevent the machine from sleeping when closed by running InsomniaX, but then it'll assume the builtin display is still active, so you end up with a two-display setup when you really only want the external. This is obviously less than ideal. So, is there any work around, hack, utility, black magic that I can use to make it run in clamshell mode while strictly on battery power? Also, bonus points for a solution that makes the AC status not affect the machine state at all. (Like, you know, it does normally, when not in clamshell.)

    Read the article

  • Find and raise a window in KDE4 with shortcut

    - by Andre_112
    Hi all! I was wondering about a possibility to find and raise some window in KDE4 with shortcut. Currently in KDE 4.4 there is a possibility to switch to window from krunner (Alt-F2). Say, I have an open konsole widow somewhere and to switch to it, I can Alt-F2, write konsole and choose konsole window I need from the list. This is great, but too much typing. I would like to have a keyboard shortcut to do the same. Maybe some DBUS magic can do that? Any ideas? Thaks! Andre

    Read the article

  • How Do You Stress-Test Your Hard Drives?

    - by MetaHyperBolic
    When looking for large new drives (= 1 TB) on newegg and the like, I note a number of reviews talking about drives being either D.O.A. or hitting the Click of Death (or even releasing the Magic Smoke) within a week or so of use. A portion of the reviews mention this phenomenon whether the drive in question is Western Digital or Hitachi or whatever. For those of you using Windows, what do you to: 1) Place a large initial stress on the drive to see if it can take it? For how long? 2) Test the drive afterwards (presumably with some sort of S.M.A.R.T. tool or others) to see if any negative changes have been noted? Note: This is one component of a larger plan for both high-availability and backups for my home data.

    Read the article

  • How can I share files from my Windows 7 machine to my friend's Ubuntu machine?

    - by ProfKaos
    I run a Windows 7 Pro SP1 laptop as my home machine, and my housemate runs an Ubuntu 12.04.1.05 desktop. We share a WLAN. I would like to make certain locations and files available for him to read and maybe write. How can I go about this? Bearing in mind I have very little recent experience with modern Linux, and Ubuntu in particular. My first idea is to share a Windows folder with my Ubuntu VM under VMWare Player, then his Ubuntu machine can connect to my Unbuntu VM, and the two can use whatever magic Ubuntu uses to achieve file sharing. This requires my Ubuntu VM to be always running though, and that may not always be possible. I have also heard that Samba may have a feature to help here, but I know nothing about that. How can I share my Windows files with my mate's Ubuntu machine, preferably with a 1 to 1 connection, i.e. rather not using shim VM's

    Read the article

  • Windows folder encryption

    - by Razor
    My situation I know that bitlocker is meant to encrypt whole drives, but I have an hard drive that is already fully partitioned and containing data. I'd like to encrypt part of one partition, leaving the rest of the partition accessible. I would very much like to avoid programs like Norton partition magic (which resize/split partitions), because every time I used them I had problems with the data stored. Question Is there any way/builtin alternative/3rd party app that integrates with windows login to encrypt one subset of a partition? EDIT I heard horror stories about EFS, which is why I don't want to use it, unless there have been improvements on reliability with windows 8. Some highlights from that article: In fact I’ve only used EFS twice in the last ten years on my own computers and on both occasions I’ve lost files and documents. I therefore cannot recommend you ever encrypt your files with this Windows feature. Unfortunately, because of incompatibilities with some differing versions of EFS files can end up scrambled and unrecoverable.

    Read the article

  • How do I hookup a dual video card Crossfire rig to a single monitor?

    - by Alexed
    I just received a new Alienware box preinstalled with two nice shiny ATI 6950 graphics cards. My goal is to use both of them to give me really good resolution and frame rate on my single monitor. There's zero documentation with the Alienware box and nothing I can find online. Do I just plug the monitor into one of the cards, and expect the two cards to do magic internally? The ATI Crossfire website indicates a need for an "external crossfirex connection cable". Do I need to buy one of these? If so, what kind of cable is it? The AMD Catalyst Control Center shows the second card as "Linked" but when I go to the AMD Overdrive section, the second card is at zero temperature, and clock, suggesting it's not actually doing anything. What do I need to do to make use of both cards? Is it something that doesn't kick in until I do something graphically intensive?

    Read the article

  • Bitlocker folder encryption

    - by Razor
    My situation I know that bitlocker is meant to encrypt whole drives, but I have an hard drive that is already fully partitioned and containing data. I'd like to encrypt part of one partition, leaving the rest of the partition accessible. I would very much like to avoid programs like Norton partition magic (which resize/split partitions), because every time I used them I had problems with the data stored. Question Is there any way/builtin alternative/3rd party app that integrates with windows login to encrypt one subset of a partition? EDIT I heard horror stories about EFS, which is why I don't want to use it. Some highlights from that article: In fact I’ve only used EFS twice in the last ten years on my own computers and on both occasions I’ve lost files and documents. I therefore cannot recommend you ever encrypt your files with this Windows feature. Unfortunately, because of incompatibilities with some differing versions of EFS files can end up scrambled and unrecoverable.

    Read the article

  • Recover files after unsuccessful partitioning

    - by arsan
    I wanted to install another Linux on my computer, so I tried to resize one of my NTFS partitions with Norton Partition Magic. It didn't complete successfully, showed some errors, said that the partition is not resized and that it's the same size like before. But when I rebooted my computer I couldn't open that partition anymore and I am also not able to mount it from Linux. So this is my question: I had very important data on that partition - can I recover it? I guess nothing's deleted; it's just something messed up so it's not usable, but can I get it back? Please reply if there's any possible way of doing this, thank you.

    Read the article

  • Creating an app shortcut in Windows 7 XP Mode

    - by MT_Head
    I have a VERY old legacy app that I've managed to move from machine to machine; the installer for it doesn't actually work under newer versions of Windows, but I was able to track down the registry changes and DLL registrations necessary to make it work. I'm able to create a desktop icon in my XP mode environment, and the program works... but I'd like to add an icon to the Windows 7 menu, and run the program in semi-native mode. For example, the icon for Microsoft Security Essentials in XP mode has the following target: %SystemRoot%\system32\rundll32.exe %SystemRoot%\system32\VMCPropertyHandler.dll,LaunchVMSal "Windows XP Mode" "||232f633" "Microsoft Security Essentials" Now, the only part of that that seems to be "magic" is "||232f633" - does anyone have any idea where that comes from, or how to identify the correct equivalent for an arbitrary program? I gather that, had the program been installed normally through a .msi file (or WISE, or NSIS, or what have you), this id would have been generated automagically... Thanks for any insights!

    Read the article

  • Just how slow should my VPN be?

    - by David Heggie
    I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a DrayTek 3200 router at the EFM end. However, I'm unable to get speeds over this connection (tested with iperf) of anything over 600Kb or so down from the main office (traffic will pretty much always be from the main office to the remote office) Whilst I realise that there is an overhead and I'm never going to get the "full" bandwidth available over this VPN, I'd like to think that there's something I should be looking at that may help improve it. I've tried using the DrayTek's built-in "VPN Trunking" features which are supposed to load-balance connections, but this doesn't seem to improve matters much. I guess my question is - is this the kind of performance I should expect from this kind of setup and I'll just have to live with it, or should I be able to squeeze something more out of it through some VPN magic?

    Read the article

  • two identical broadband lines working as one

    - by Katafalkas
    I have been trying to find an answer to this, but all I get is hobbyists trying to connect they linksys's and get some magic out of it. So I am thinking of a way I could combine two 100Mbp Fiber Optics lines into a single connection for our office. I assume it involves some CISCO learning or something like this. Was thinking that I might need to configure some big router to load-balance the NAT'ing in some way. I assume that meny of you have done something similar and maybe someone could share the knowledge or at least provide some tips ?

    Read the article

  • Add Control Panel items to Windows 8.1 Search

    - by Alec
    Windows 8.1 claims to search in all indexed locations. However when I tried to open "Mail" (i.e. Mlcfg32.cpl) by typing "Mail" in Search, magic didn't happen. Instead I had to scramble all the way through Control Panel. Is it possible to add Control Panel items to those indexed locations? Or is it just the thing Microsoft forgot about? (e.g. forgot on intention, so users would make use of their new "Settings" applet).

    Read the article

  • How do I update the memberOf attributes of existing objects after adding the OpenLDAP Reverse Group Membership Maintenance overlay?

    - by mss
    This is a follow-up to this question: I added the memberof overlay to an existing OpenLDAP 2.4 server. Now I want to update the existing user objects. For new group memberships, the memberOf attribute is updated correctly. But I have a bunch of existing groups which aren't updated automatically. I could remove all users from their groups and re-add them to make sure these entries are in sync. Since this is a Univention Corporate Server which does a lot of magic when you modify the LDAP, I don't want to risk breaking my directory. Is there a way to trick the overlay to update these operational attributes?

    Read the article

  • How to run a GUI app from ssh shell?

    - by karramba
    I can access my linux box by ssh and by vnc. I want to run a GUI application, but directly from ssh, I don't want to access through VNC and click around. So, after logging in using ssh, I want to issue a magic command, so that when I log in through VNC I will see my GUI app running. How can I do this? edit: The linux box have X server running on it. I need to automate restarting a GUI application. I want to do it without any kind of GUI interaction. What I need: login through ssh on SERVER run my GUI app by forcing it to bind to X server running on SERVER ??? PROFIT!

    Read the article

  • How can I restore my "Unknown" partition type, back to NTFS?

    - by Alan
    Lately I've been having trouble restoring my PC after uninstalling GRUB, and an Ubuntu install from it. Usually I don't encounter any problems when doing this, but this time is different. My Windows XP (NTFS) partition is listed as "Other" in Partition Magic, and "Unknown" in GParted rather than "NTFS". How can I gain access to Windows partition once again? I am more than willing to provide any information, and run any tests necessary to produce said information in order to find out what's going on here. My apologies if this is the wrong place to ask such a question. I have heard nothing but good about Superuser, and decided to give it a shot. Thanks!

    Read the article

  • Is it possible to dump the names of all the open files in notepad++ to a file?

    - by mark
    So, I dragged and dropped multiple files onto notepad++. The files came from different directories and were selected using different criteria. So, I have many files open in Notepad++. Now I need to have a list of all the open files in another file. Right now, my only option is to script the decisions used to guide me in selecting the files in the first place. Which is probably the best in the long term, but I wonder if there is a quicky one in Notepad++. Some plugin magic or whatever. Suggesting another free editor which has this function is a good option too (not that I am going to ditch notepad++, God forbid)

    Read the article

  • Boot another OS e.g. Windows *once* on a dual-boot machine

    - by user974312
    I have a dual-boot machine with Windows and Linux on it. It doesn't reside at my hand, instead , it's placed in the datacenter which I have to access remotely. For most of time, I work on Linux. But there is some occasion that I have to use the Windows OS on it. Here is the problem. I hope to do all those following things remotely. Do some magic to Grub. Reboot the machine from Linux. Grub boots Windows. Access Windows remotely. Work done. Reboot the machine from Windows. Grub boots Linux. So I wonder whether I can set the booting target at the next time, for only once? Thanks.

    Read the article

  • Configure PL2303-based USB-to-RS232 adapter to stay awake when no active device is present

    - by casualuser
    I am resurrecting some X10 devices with the aid of a USB-to-RS232 adapter. The problem is, that the adapter only works with the Firecracker device when there is another serial device on the line (the Firecracker is a pass-through device that monitors the RTS and DTR lines to do its magic). Is the PL2303 going to sleep without a real device on the line? Is there an option or command to keep it awake? Is there a cable configuration that would make it work without a real serial device present?

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >