Search Results

Search found 1918 results on 77 pages for 'orange async'.

Page 54/77 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Poor write performance on Debian server running NFS with 22TB exported JFS filesystem

    - by user143546
    I am currently running a debian server that is exporting a large JFS filesystem (22TB) over NFS (nfs-kernel-server.) When attempting to write to the NFS share, the performance is very poor. The 22TB disk is sitting on a NAS mounted using iSCSI. It will bust for a moment near expected line speed, and then sit idle for several seconds. Very little traffic measured in the low kb/sec. The wait peeks on write. When reading from the NFS mount, the system operates at expected speeds (11MB/sec). The issue does not occur when using SFTP, rsync, or local coping (non-nfs). The issue persists between stable and testing releases. On the same machine I have a 14TB ext4 filesystem using the exact same export configuration that does not share the issue. This share is not in regular use and thus not consuming resources. NFS Server: cat /etc/exports /data2 10.1.20.86(rw,no_subtree_check,async,all_squash) cat /sys/block/sdb/queue/scheduler noop [deadline] cfq cat /etc/default/nfs-kernel-server RPCNFSDCOUNT=8 RPCNFSDPRIORITY=0 RPCMOUNTDOPTS=--manage-gids NEED_SVCGSSD= RPCSVCGSSDOPTS= NFS Client: cat /etc/fstab 10.1.20.100:/data2 /root/incoming nfs rw,noatime,soft,intr,noacl 0 2 cat /sys/block/sdb/queue/scheduler noop [deadline] cfq cat /proc/mounts 10.1.20.100:/data2/ /root/incoming nfs4 rw,noatime,vers=4,rsize=262144,wsize=262144,namlen=255,soft,proto=tcp,port=0,timeo=600,retrans=2,sec=sys,clientaddr=10.1.20.86,minorversion=0,addr=10.1.20.100 0 0 This problem has me pretty stumped. Any help would be greatly welcomed. Thanks.

    Read the article

  • Is it Possible to Use Constraints on Hierarchical Data in a Self-Referential Table?

    - by pbarney
    Suppose you have the following table, intended to represent hierarchical data: +--------+-------------+ | Field | Type | +--------+-------------+ | id | int(10) | | parent | int(10) | | name | varchar(45) | +--------+-------------+ The table is self-referential in that the parent_id refers to id. So you might have the following data: +----+--------+---------------+ | id | parent | name | +----+--------+---------------+ | 1 | 0 | fruit | | 2 | 0 | vegetable | | 3 | 1 | apple | | 4 | 1 | orange | | 5 | 3 | red delicious | | 6 | 3 | granny smith | | 7 | 3 | gala | +----+--------+---------------+ Using MySQL, I am trying to impose a (self-referential) foreign key constraint upon the data to cascade on update and prevent deletion of a record if it has any "children." So I used the following: CREATE TABLE `test`.`fruit` ( `id` INT(10) UNSIGNED NOT NULL AUTO_INCREMENT, `parent` INT(10) UNSIGNED, `name` VARCHAR(45) NOT NULL, PRIMARY KEY (`id`), CONSTRAINT `fk_parent` FOREIGN KEY (`parent`) REFERENCES `fruit` (`id`) ON UPDATE CASCADE ON DELETE RESTRICT ) ENGINE = InnoDB; From what I understand, this should fit my requirements. (And parent must default to null to allow insertions, correct?) The problem is, if I change the id of a record, it will not cascade: Cannot delete or update a parent row: a foreign key constraint fails (`test`.`fruit`, CONSTRAINT `fk_parent` FOREIGN KEY (`parent`) REFERENCES `fruit` (`id`) ON UPDATE CASCADE) What am I missing? Feel free to correct me if my terminology is screwed up... I'm new to constraints.

    Read the article

  • Issue scrolling table view with content inset

    - by Rog
    Hi all, I am experiencing a weird scrolling issue and I was hoping someone could give me a hand in trying to identify why this is happening. I have included the part of my code that I think is relevant to the question but am happy to update this post with whatever else is needed. I have implemented a pull to refresh view in the tableview's content inset area. The refresh fires an Async NSURLConnection that pulls data from a webserver, parses the relevant information and refreshes the table as required. This is where the refresh process kicks off: - (void)scrollViewDidEndDragging:(UIScrollView *)scrollView willDecelerate:(BOOL)decelerate{ if (scrollView.contentOffset.y <= - 65.0f && !self.reloading) { self.reloading = YES; [self reloadTableViewDataSource]; [refreshHeaderView setState:EGOOPullRefreshLoading]; [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.2]; self.tableView.contentInset = UIEdgeInsetsMake(60.0f, 0.0f, 0.0f, 0.0f); [UIView commitAnimations]; } } Problem is if I start to scroll whilst the content inset is "visible" (i.e. during reload) I get this weird behaviour where my table sections do not scroll all the way to the top - see screenshot for a clear visual of what I am trying to describe here. I have included a couple of screenshots below that clearly identify what is happening at the moment. Has anyone experienced this before? Any ideas on what I should be looking at to try and fix it? Many thanks in advance, Rog And this is the result if I start scrolling the table. The orange bit at the top of the image is the actual navigation bar, where I would expect the table section (date 1 December 2010) to be.

    Read the article

  • Why does Google Analytics use two domains?

    - by AKeller
    I'm building a distributed widget that is comparable to Google Analytics. Users will add a <script> tag to their site that references my widget's JavaScript file. The Google Analytics tracking code looks like this: var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-XXXXXXXX-X']); _gaq.push(['_trackPageview']); (function () { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); Can anyone explain the reasoning behind separate HTTP and HTTPS hostnames? My instinct is to just secure the www address and then use the protocol-less syntax, like //www.google-analytics.com/ga.js. But I'm sure the Google Analytics architects put a lot of thought into this approach. I'd love to understand their logic before I follow/ignore their model.

    Read the article

  • Limiting the width of a TextBlock in Silverlight

    - by Druzil
    The obvious MaxWidth gets ignored and the text in the "DisplayBox" TextBlock displays the whole text even if this text continues past the parent container controls (to the edge of the silverlight area. <win:HierarchicalDataTemplate x:Key="hierarchicalTemplate" ItemsSource="{Binding _children}"> <Border BorderThickness="0" BorderBrush="Orange" HorizontalAlignment="Stretch" Background="{Binding Converter={StaticResource BackgroundConverter}}"> <toolkit:DockPanel LastChildFill="True" Width="{Binding HeirarchyLevel, Converter={StaticResource WidthConverter}}" Height="20"> <Canvas toolkit:DockPanel.Dock="Right" Width="20" MouseLeftButtonUp="Arrow_MouseLeftButtonDown"> <Rectangle Width="20" Height="20" Fill="Transparent" /> <Line Stroke="Black" X1="5" Y1="10" X2="17" Y2="10" /> <Line Stroke="Black" X1="11" Y1="5" X2="17" Y2="10" /> <Line Stroke="Black" X1="11" Y1="15" X2="17" Y2="10" /> </Canvas> <Ellipse Canvas.Top="5" Width="10" Height="10" Fill="Green" toolkit:DockPanel.Dock="Right" MouseLeftButtonDown="Ellipse_MouseLeftButtonDown" /> <Canvas Width="Auto" Loaded="TextArea_Loaded"> <TextBlock Name="DisplayBox" FontFamily="Arial" FontSize="17" Foreground="Black" Width="Auto" Text="{Binding TaskName}" MouseLeftButtonUp="TextBlock_MouseLeftButtonUp" /> <TextBox Name="EditBox" FontFamily="Arial" FontSize="10" Foreground="Black" Height="20" Text="{Binding TaskName}" Visibility="Collapsed" LostFocus="TextBox_LostFocus" /> <Line Stroke="Black" X1="0" Y1="10" X2="202" Y2="10" Width="Auto" /> </Canvas> </toolkit:DockPanel> </Border> </win:HierarchicalDataTemplate>

    Read the article

  • Dynamically creating subviews of similar type

    - by Akki
    My code for above view is: -(void)viewWillAppear:(BOOL)animated{ float yh = 0; while (yh<200) { //UIView CGRect myFrame = CGRectMake(0, yh, 320, 30); UIView *myFirstView = [[UIView alloc] initWithFrame:myFrame]; myFirstView.backgroundColor = [UIColor orangeColor]; //IUILabel in UIView CGRect mylblFrame = CGRectMake(5, yh, 60, 15); UILabel *lblsize = [[UILabel alloc] initWithFrame:mylblFrame]; lblsize.text = @"Hello"; [myFirstView addSubview:lblsize]; CGRect mylbl_hi = CGRectMake(80, yh, 60, 15); UILabel *lbl_hi = [[UILabel alloc] initWithFrame:mylbl_hi]; lbl_hi.text = @"Hii"; [myFirstView addSubview:lbl_hi]; [self.view addSubview:myFirstView]; [lbl_hi release]; [lblsize release]; [myFirstView release]; yh=yh+40; } [super viewWillAppear:YES]; } I can't understand reason of it being like this...i wanted labels to be attached with my subviews of orange color...this may be odd day for me to understand what's wrong with my code...if any of you can tell me where i ma doing wrong would be great to me. This is my first time creating view programmatically..so please excuse me if all this is silly question

    Read the article

  • How to merge two icons together? (overlay one icon on top of another)

    - by demoncodemonkey
    I've got two 16x16 RGB/A .ICO icon files, each loaded into a separate System.Drawing.Icon object. How would you create a new Icon object containing the merge of the two icons (one overlaid on top of the other)? Edit: I probably wasn't too clear, I don't want to blend two images into each other, I want to overlay one icon on top of another. I should add that the icons already contain transparent parts and I do not need any transparent "blending" to make both icons visible. What I need is to overlay the non-transparent pixels of one icon over the top of another icon. The transparent pixels should let the background icon show through. For example, look at the stackoverflow icon. It has some areas that are grey and orange, and some areas that are totally transparent. Imagine you want to overlay the SO icon on top of the Firefox icon. You would see the greys and oranges of the SO icon in full colour, and where the SO icon is transparent, you would see those parts of the Firefox icon.

    Read the article

  • Can we solve the table row background image problem, in chrome, in multi celled tables??

    - by Ya'el
    It is frequently asked – but I haven’t seen a good answer yet (and I looked). If you set a background image in CSS to a table row- the image will repeat itself in every cell. If you set the position: relative (for the row) and set the background-image: none (for the cells) it solves the problem on IE but not on chrome! I can't use background positioning since there are many calls and their size varies. (And the picture is not symmetrical- It's a fade out from one side. Anybody?? Example for the css code : tr { height: 30px; position:relative;} tr.green {background: url('green_30.png') no-repeat left top;} tr.orange {background: url('oranger_30.png') no-repeat left top;} tr.red {background: url('red_30.png') no-repeat left top;} td {background-image:none;} The HTML is basic - A multi cell table. The goal is to have different colors fade into every row, but it could be any non-pattern image.

    Read the article

  • ActionScript 3.0 Color Output Error?

    - by TheDarkIn1978
    I'm employing color in a current AS3 project, and have come across what appears to be an error in the Flash Player (version 10). it might also be an error with Apple's DigitalColor Meter (version 3.7.2), which is what i'm using to sample the displayed colors on Mac OS X Snow Leopard (version 10.6.3). //Primary, secondary, and tertiary colors of the RGB color wheel var red:Number = 0xFF0000; var orange:Number = 0xFF7D00; var yellow:Number = 0xFFFF00; var chartreuse:Number = 0x7DFF00; var green:Number = 0x00FF00; var spring:Number = 0x00FF7D; var cyan:Number = 0x00FFFF; var azure:Number = 0x007DFF; //reads 0x0077FF var blue:Number = 0x0000FF; var violet:Number = 0x7D00FF; var magenta:Number = 0xFF00FF; //reads 0xFF00F8 var rose:Number = 0xFF007D; //reads 0xFF0077 all of these colors display normally except for 3: Azure, Magenta and Rose. they are coded with the appropriate number, but when i use the color meter to sample the displayed colors, those 3 return inaccurate results. anyone have any insight about this issue? what is causing the error, the Flash runtime or the color sampler? if it's the Flash player, could this problem be much deeper? *sampling this image will return inaccurate results due to .jpg compression. it's simply for illustration

    Read the article

  • The best way to structure this database?

    - by James P
    At the moment I'm doing this: gems(id, name, colour, level, effects, source) id is the primary key and is not auto-increment. A typical row of data would look like this: id => 40153 name => Veiled Ametrine colour => Orange level => 80 effects => +12 sp, +10 hit source => Ametrine (Some of you gamers might see what I'm doing here :) ) But I realise this could be sorted a lot better. I have studied database relationships and secondary keys in my A-Level computing class but never got as far as to set one up properly. I just need help with how this database should be organised, like what tables should have what data with what secondary and foreign keys? I was thinking maybe 3 tables: gem, effects, source. Which then have relationships to each other? Can anyone shed some light on this? Is a complex way like I'm proposing really the way to go or should I just carry on with what I'm doing? Cheers.

    Read the article

  • Python, web log data mining for frequent patterns

    - by descent
    Hello! I need to develop a tool for web log data mining. Having many sequences of urls, requested in a particular user session (retrieved from web-application logs), I need to figure out the patterns of usage and groups (clusters) of users of the website. I am new to Data Mining, and now examining Google a lot. Found some useful info, i.e. querying Frequent Pattern Mining in Web Log Data seems to point to almost exactly similar studies. So my questions are: Are there any python-based tools that do what I need or at least smth similar? Can Orange toolkit be of any help? Can reading the book Programming Collective Intelligence be of any help? What to Google for, what to read, which relatively simple algorithms to use best? I am very limited in time (to around a week), so any help would be extremely precious. What I need is to point me into the right direction and the advice of how to accomplish the task in the shortest time. Thanks in advance!

    Read the article

  • Strategy for animation a lot of LED's - thread?, UIView animations? NSOperation? (iPhone)

    - by RickiG
    Hi I have to do some different views containing 72 LED lights. I built an LED Class so I can loop through the LED's and set them to different colors (Green, Red, Orange, Blue None etc.). The LED then loads the appropriate .png. This works fine, I loop over the LED's and set them. Now I know that at some time they will need to not just turn on/off change color, but will have to turn on with a small delay. Like an equalizer. I have a 5-10 views containing the 72 LED's and I would like to achieve the above with the minimum amount of memory/CPU strain. for(LED *l in self.ledArray) { [l display:Green]; } I simply loop as shown above and inside the LED is a switch case that does the correct logic. If this were actual LED's and a microController I would use sleep(100) or similar in the loop, but I would really like to avoid stuff like that for obvious reasons. I was thinking that doing a performOnThread withDelay would really be consuming, so would UIView animation changing the alpha and NSOperation would also be a lot of lifting for a small feature. Is there a both efficient and clever way to go around this? Thanks for any inspiration given:)

    Read the article

  • Array of Sentences?

    - by user1869915
    Javascript noob here.... I am trying to build a site that will help my kids read predefined sentences from a select group, then when a button is clicked it will display one of the sentences. Is an array the best option for this? For example, I have this array (below) and on the click of a button I would like one of these sentences to appear on the page. <script type="text/javascript"> Sentence = new Array() Sentence[0]='Can we go to the park.'; Sentence[1]='Where is the orange cat? Said the big black dog.'; Sentence[2]='We can make the bird fly away if we jump on something.' Sentence[3]='We can go down to the store with the dog. It is not too far away.' Sentence[4]='My big yellow cat ate the little black bird.' Sentence[5]='I like to read my book at school.' Sentence[6]='We are going to swim at the park.' </script> Again, is an array the best for this and how could I get the sentence to display? Ideally I would want the button to randomly select one of these sentences but just displaying one of them for now would help. Thanks

    Read the article

  • How to optimize this MYSQL table?

    - by Lost_in_code
    This is for an upcoming project. I have two tables - first one keeps tracks of photos, and the second one keeps track of the photo's rank Photos: +-------+-----------+------------------+ | id | photo | current_rank | +-------+-----------+------------------+ | 1 | apple | 5 | | 2 | orange | 9 | +-------+-----------+------------------+ The photo rank keeps changing on a regular basis and this is the table that tracks it: Ranks: +-------+-----------+----------+-------------+ | id | photo_id | ranks | timestamp | +-------+-----------+----------+-------------+ | 1 | 1 | 8 | * | | 2 | 2 | 2 | * | | 3 | 1 | 3 | * | | 4 | 1 | 7 | * | | 5 | 1 | 5 | * | | 6 | 2 | 9 | * | +-------+-----------+----------+-------------+ * = current timestamp Every rank is tracked for reporting/analysis purpose. I talked to someone who has experience in this field and he told me that storing ranks like above is the way to go. But I'm not so sure yet. The problem here is data redundancy. There are going to be tens of thousands of photos. The photo rank changes on a hourly basis (many time within minutes) for recent photos but less frequently for older photos. At this rate the table will have millions of records within months. And since I do not have experience in working with large databases, this makes me a little nervous. I thought of this: Ranks: +-------+-----------+--------------------+ | id | photo_id | ranks | +-------+-----------+--------------------+ | 1 | 1 | 8:*,3:*,7:*,5:* | | 2 | 2 | 2:*,9:* | +-------+-----------+--------------------+ * = current timestamp That means some extra code in PHP to split the rank/time (and sorting) but that looks OK to me. Is this a correct way to optimize the table for performance? What would you recommend? Any suggestions would be great.

    Read the article

  • NFS server hangs after 3 minutes

    - by John P
    I have a VPS running Centos 6.3 with a fully updated NFS. When I mount the NFS directory from the client, everything works perfectly fine for approximately 3 minutes, then the client hangs attempting to see the directory. nfs-utils-1.2.3-26.el6.x86_64 service nfs status rpc.svcgssd is stopped rpc.mountd (pid 2544) is running... nfsd (pid 2609 2608 2607 2606 2605 2604 2603 2602) is running... rpc.rquotad (pid 2540) is running... cat /etc/exports /home/user XX.XX.XX.20(rw,async,no_root_squash) The client is running Centos 5.8. The directory is mounted using mount x.x.x.6:/home/user /mnt When everything is working, I get the following on the client: /usr/sbin/rpcinfo -p X.X.X.6 | grep mountd 100005 1 udp 892 mountd 100005 1 tcp 892 mountd 100005 2 udp 892 mountd 100005 2 tcp 892 mountd 100005 3 udp 892 mountd 100005 3 tcp 892 mountd When it stops working, rpcinfo just hangs on the client, however running the above command on the server does return data. There are no logs on the NFS Server side that would indicate an issue. On the client side, I see: cat /var/log/messages kernel: nfs: server X.X.X.6 not responding, still trying The client and server are plugged into the same switch, however they are on different networks. The server is a VPS while the client is a dedicated box. SELINUX is in permissive mode on both client and server, and I've turned iptables off on the server to make sure that was not causing an issue. Any ideas would be helpful - right now I'm having to restart NFS every two minutes in a cron job to keep it semi working. Thanks

    Read the article

  • jQuery Templates on Microsoft Ajax CDN

    - by Stephen Walther
    The beta version of the jQuery Templates plugin is now hosted on the Microsoft Ajax CDN. You can start using the jQuery Templates plugin in your application by referencing both jQuery 1.4.2 and jQuery Templates from the CDN. Here are the two script tags that you will want to use when developing an application: <script type="text/javascript" src=”http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js”></script> <script type="text/javascript" src=”http://ajax.microsoft.com/ajax/jquery.templates/beta1/jquery.tmpl.js”></script> In addition, minified versions of both files are available from the CDN: <script type="text/javascript" src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="http://ajax.microsoft.com/ajax/jquery.templates/beta1/jquery.tmpl.min.js"></script> Here’s a full code sample of using jQuery Templates from the CDN to display pictures of cats from Flickr: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Cats</title> <style type="text/css"> html { background-color:Orange; } #catBox div { width:250px; height:250px; border:solid 1px black; background-color:White; margin:5px; padding:5px; float:left; } #catBox img { width:200px; height: 200px; } </style> </head> <body> <h1>Cat Photos!</h1> <div id="catBox"></div> <script type="text/javascript" src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="http://ajax.microsoft.com/ajax/jquery.templates/beta1/jquery.tmpl.min.js"></script> <script id="catTemplate" type="text/x-jquery-tmpl"> <div> <b>${title}</b> <br /> <img src="${media.m}" /> </div> </script> <script type="text/javascript"> var url = "http://api.flickr.com/services/feeds/groups_pool.gne?id=44124373027@N01&lang=en-us&format=json&jsoncallback=?"; // Grab some flickr images of cats $.getJSON(url, function (data) { // Format the data using the catTemplate template $("#catTemplate").tmpl(data.items).appendTo("#catBox"); }); </script> </body> </html> This page displays a list of cats retrieved from Flickr: Notice that the cat pictures are retrieved and rendered with just a few lines of code: var url = "http://api.flickr.com/services/feeds/groups_pool.gne?id=44124373027@N01&lang=en-us&format=json&jsoncallback=?"; // Grab some flickr images of cats $.getJSON(url, function (data) { // Format the data using the catTemplate template $("#catTemplate").tmpl(data.items).appendTo("#catBox"); }); The final line of code, the one that calls the tmpl() method, uses the Templates plugin to render the cat photos in a template named catTemplate. The catTemplate template is contained within a SCRIPT element with type="text/x-jquery-tmpl". The jQuery Templates plugin is an “official” jQuery plugin which will be included in jQuery 1.5 (the next major release of jQuery). You can read the full documentation for the plugin at the jQuery website: http://api.jquery.com/category/plugins/templates/ The jQuery Templates plugin is still beta so we would really appreciate your feedback on the plugin. Let us know if you use the Templates plugin in your website.

    Read the article

  • Preview Before You Paste with Live Preview in Office 2010

    - by DigitalGeekery
    Do you often find yourself frustrated that content you just copied and pasted didn’t turn out the way you expected? With the new Live Preview in Office 2010, you can preview how copied content will look when it’s pasted even between Office applications. Not every paste preview option will be available in every circumstance. The available options will be based on the applications being used and what content is copied. Copy your content like normal by right-clicking and selecting Copy, pressing Crtl + C, or selecting Copy from the Home tab. Next, select your location to paste the content. Now you can access the Paste Preview buttons either by selecting the Paste dropdown list from the Home tab…   …Or by right-clicking. As you hover your cursor over each of the Paste Options buttons, you will see a preview of what it will look like if you paste using that option. Click the corresponding button when you find the paste option you like. The “Paste” will paste all the content and formatting as you can see below. Values will paste values only, no formatting.   Formatting will paste only the formatting, no values. Hover over Paste Special to reveal any additional paste options. The process is similar in other Office applications. As you can see in the Word document below, Keep Text Only will paste the text, but not the orange color format from the original text.   Even after you’ve pasted, there is still time to change your mind. After you paste content you’ll see a Paste Option button near your content. If you don’t, you can pull it up by pressing the Ctrl key. Note: This is also available after using Ctrl + V to paste. Click to enable the dropdown and select one of the available options.   Using Live Paste Preview between multiple applications is just as easy. If we preview pasting the content from our Word document into PowerPoint by using the Keep Source Formatting option, we’ll see that the outcome looks awful. Selecting the Use Destination Theme will merge the text into the theme of the PowerPoint document and looks a lot better on our slide.   Live Paste Preview is a nice addition to Office 2010 and is sure to save time spent undoing the unexpected consequences of pasting content. Looking for more Office 2010 tips? Check out some of our other Office 2010 posts like how to create a customized tab on the Office 2010 ribbon, and how to use the streamlined printing features in Office 2010. Similar Articles Productive Geek Tips Edit Microsoft Word 2007 Documents in Print PreviewPreview Documents Without Opening Them In Word 2007How to See Where a TinyUrl Is Really Linking ToHow To Upload Office 2010 Documents to Web Apps Technical PreviewPreview Links and Images in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor

    Read the article

  • Gnome Shell Theme Problem on Ubuntu 11.10

    - by Khurram Majeed
    I am trying to install ANewStart GNOME shell themes on Ubuntu 11.10. I have installed gnome shell extension for themes: sudo add-apt-repository ppa:webupd8team/gnome3 sudo apt-get update sudo apt-get install gnome-shell-extensions-user-theme I got the instructions from here ANewStart GNOME Shell Theme + AwOken Icons Theme = Pure Art. But when I go to "Advanced Settings - Shell Extensions" its empty... There is nothing. Also there is a orange triangle sign next to Shell Theme drop down in Advanced Settings - Theme. When I try to run the gnome-tweak-tool from terminal I get following error: imresh@imresh-laptop:~$ gnome-tweak-tool CRITICAL: Error parsing schema org.gnome.shell (/usr/share/glib-2.0/schemas/org.gnome.shell.gschema.xml) Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/gsettings.py", line 45, in __init__ summary = key.getElementsByTagName("summary")[0].childNodes[0].data IndexError: list index out of range WARNING : Error detecting shell Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell_extensions.py", line 145, in __init__ shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 123, in __init__ v = map(int,proxy.version.split(".")) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 46, in version return json.loads(self.execute_js('const Config = imports.misc.config; Config.PACKAGE_VERSION')) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 39, in execute_js result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Shell not running Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 57, in __init__ self._shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 123, in __init__ v = map(int,proxy.version.split(".")) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 46, in version return json.loads(self.execute_js('const Config = imports.misc.config; Config.PACKAGE_VERSION')) File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 39, in execute_js result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Could not list shell extensions Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 62, in __init__ extensions = self._shell.list_extensions() AttributeError: ShellThemeTweak instance has no attribute '_shell' (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed (gnome-tweak-tool:5323): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion `width >= 0' failed Please help me in fixing this. I have also restarted the computer many times it does not make a difference.

    Read the article

  • PASS: International Travels

    - by Bill Graziano
    Nihao!  One of the largest changes PASS is going through is the the expansion outside the US and Canada.  We’ve had international chapters and events in Europe since the early 2000’s.  But nothing on the scale we’re seeing now.  Since January 1st there have been 18 SQL Saturday events outside North America and 19 events in North America.  We hope to have three international SQLRally events outside the US in FY13 (budget willing).  I don’t know the exact percentage of chapters outside the US but it’s got be 50% or higher. We recently started an effort to remake the Board to better reflect the growing global face of PASS.  This involves assigning some Board seats to geographic regions.  You can ask questions about this in our feedback forum, participate in a Twitter chat or ask questions directly of Board members.  You can email me at if you’d like to ask a question directly.  We’re doing this very slowly and deliberately in hopes that a long communication cycle gives us a chance to address all the issues that our members will raise. After the Summit we passed a budget exception allocating an extra $20,000 for Board members to travel to local events.  I think it’s important for Board members to visit new areas and talk to more of our members.  I sent out an email asking where people had attended events outside their home city.  Here’s the list I got back: Albuquerque, Amsterdam, Boston, Brisbane, Chicago, Colorado Springs, Columbus, Dallas, Houston, Jacksonville, Las Vegas, London, Louisville, Minneapolis, New York City, Orange County, Orlando, Pensacola, Perth, Philadelphia, Phoenix, Redmond, Seattle, Silicon Valley, Sydney, Tampa Bay, Vancouver, Washington DC and Wellington.  (Disclaimer: Some of this travel was paid for by employers or Board members themselves.  Some of this travel may have been completed before the Summit.  That’s still one heck of a list!) The last SQL Saturday event this fiscal year is SQL Saturday Shanghai.  And that’s one I’m attending.  This is our first event in China and is being put on in cooperation with the local Microsoft office.  Hopefully this event will be the start of a growing community in China that includes chapters, SQL Saturdays and maybe a SQLRally or two in the future.  I’m excited to speak with people that are just starting down this path and watching this community grow. I encourage you to visit the PASS Global Growth site and read through the material there.  This is the biggest change we’ve made to our governance since I’ve been on the Board.  You need to understand how it affects you and how it affects the organization. And wish me luck on the 15 hour flight to Shanghai on Friday afternoon.  Rob Farley flies from Australia to the US for PASS events multiple times per year and I don’t know how he does it so often.  I think one of these is going to wipe me out.  (And Nihao (knee-how) is Chinese for Hello.)

    Read the article

  • Why won't my Broadcom BCM4312 LP-PHY work with the STA driver?

    - by Jackson Taylor
    I tried the steps here for a 4312: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Both of these: sudo modprobe -r b43 ssb wl sudo modprobe wl return: FATAL: Module wl not found. FATAL: Error running install command for wl (this one is only for the second one actually) I tried the broadcom-sta, didn't work. What's confusing is down below in the next steps for STA with internet access it says to use the bcmwl one. So I install that and it succeeds but with some errors: sudo apt-get install bcmwl-kernel-source Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: module-assistant Use 'apt-get autoremove' to remove it. The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,181 kB of archives. After this operation, 3,609 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 168005 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... Building only for 3.5.0-21-generic Building for architecture x86_64 Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found. FATAL: Error running install command for wl update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-21-generic jtaylor991@jtaylor991-whiteHP:~$ sudo modprobe wl FATAL: Module wl not found. FATAL: Error running install command for wl Then I do the modprobe wl commands listed above and it gives the above listed errors. It didn't work with the broadcom-sta driver either. I installed the b43 ones but nothing happened, and I don't know why so those are still installed. firmware-b43legacy-installer, b43-fwcutter and firmware-b43-lpphy-installer (yes it is a LP-PHY) are currently installed. If I go into System Settings Software Sources Additional Drivers it says "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary) But bcmwl-kernel-source isn't installed. I could try again but I remember rebooting and it still said this. What's funny is it found wireless networks during the Ubuntu setup/installation, I don't remember if I got it to connect or not though. I think it kept asking for a password when I put it in (yes it was right I showed password and looked at it) so I just ignored it. But right now the Enable Wireless option in the top right is just gone, it's just Enable Networking and I'm on ethernet on this HP Pavilion dv4-1435dx right here. If I run rfkill list it shows: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no It was hard blocked at the beginning but unblocking it makes no change. Also it's a touch sensitive button, and it appears to be always orange no matter if it's enabled or not because when I touch it the hard blocked changes between yes and no in rfkill list. I think it was blue for a minute at one point. What is going on?!?! Help me! Lol, thanks for any and all of your time guys. Oh yeah this is Ubuntu 12.10 fresh install.

    Read the article

  • Video works with 'Try me' but not after install. What is the difference? U12.04LTS,

    - by HarveyP
    My hard drive got corrupted so I did a reinstall. Tested Youtube in FF during 'try me' and it worked - jerky, but it worked. Instal without all the updates (576 outstanding now) in order to get ff installed as per the demo - to no avail. In 'try me' mode ff NEVER crashed! After install ff crashed whilst I was typing in 'youtube' in the address field. When I finally got to youtube - no video. What is the difference between ff in try me and ff after install? Off to try some selected updates now to see if I can see it for myself. In previous installation I had several profiles and aliased ff with -safe-mode switch to simplify startup of most stable ff. Also found that ff startup in graphic mode worked better (but still without video) with all of the extensions disabled and all of the plugins set to "ask" and always denied ... I have SiS graphic card in SiS Motherboard for XP and ancient Hyundai ImageQuest QV770 monitor. I have Ubuntu 12.04.01 LTS 1 day after install with only the immediate upgrades requested to language pack (English UK). Using FR Alternative keyboard. Connected with domestic wifi network from Orange (FT) I really want to use Skype, but won't bother installing it (again) without video as I can do my sms on FB - whilst ff is not crashed ... Update ... Is something overflowing? I have just had to reboot in order to get ff to restart in any way shape or form - restart on crash form generates new crash form, etc. It was however a good half hour before it crashed so some improvement over conditions before disk corruption. I have now installed all of the critical updates (332 recommended updates still outstanding) which included some relating to ff. Still no video. Still crashing - especially when on Grepolis website. Since the re-install I have had a lovely 1024x768 screen, but after last ff crash and reboot I got a message about 'low graphics mode' and 'setting things myself'. I was not sufficiently tuned in at the time to take proper note - I have no doubt I shall see it again and shall report accordingly. I still have only laptop options for my screen and do not know how to rectify this. Spent a few days with ubuntu on a different, newer machine which has now suffered a graphics breakdown. Returned to this old one again, but with new flat screen Monitor. Found SIS drivers for my graphics BUT it is intended for Red Hat 7.2. I chose this over the version for 7.0 because I thought what the hell, I might not be able to do anything with either of them but this is the later one ... The file will not open with software manager - found a similar problem on Overclock but it has not helped me to install this driver. File name is sis_drv.o-410 and it is currently idling away in my Downloads folder ... I have tried the solution offered on another sis problem, but this shows that my xserver-xorg-video-sis driver is up to date. I am now at a loss as to how to proceed if I can't install the latest sis driver from sis ... Does nobody know how FF changes from "try-me" to "installed"? Any time I MUST have video I reboot from the disk again, but this is tedious! Also one of the things I mock most about MS is the constant rebooting ... UPDATE 10/6/2014 I have installed chromium-browser - worse, crashes even more often than ff.I have installed epiphany - better; Video works but not the associated soundtrack.FireFox is version 14.01 in 'try me' and version 29.0 from my install. Would it be useful to try to downgrade FireFox in order to get video?

    Read the article

  • Introducing the Metro User Interface on Windows 2012

    - by andywe
    Although I am a big fan of using PowerShell to do many of my server operations, that aspect is well covered by those far more knowledgeable than I, and there is vast information around the web already on that. The new Metro interface, and getting around both Windows 8 and Windows Server 2012 though is relatively new, even for those whop ran the previews. What is this? A blank Desktop!   Where did the start button go? Well, it is still there...sort of. It is hidden, and acts like an auto hidden component that appear only when the mouse is hovered over the lower left corner of the screen. Those familiar with Gnome or OSX can relate this to the "Hot Corners" functions. To get to the start button, hover your mouse in the very left corner of the task bar. Let it sit there a moment, and a small blue square with colored tiles in it called start will appear. Click it. I clicked it and now I have all the tiles..What is this?   Welcome to the Metro interface. This is a much more modern look, and although at first seems weird and cumbersome, I have actually found that it is a bit more extensible, allowing greater organization and customization than the older explorer desktop. If you look closely, you'll see each box represents either a program, or program group. First, a few basics about using the start view. First and foremost, a right mouse click will bring up a bar on the bottom, with an icon towards the right. Notice it is titled “All Apps”. An even easier way in many places is to hover your mouse in the exact opposite corner, in the upper right. A sidebar will open and expose what used to be a widget bar (remember Vista?), and there are options for Search, Start, and Settings.   Ok Great, but where is everything? It’s all there…Click the All Apps icon.   Look better? Notice the scroll bar at the bottom. Move it right..your desktop is sized to your content..so you can have a smaller, or larger amount of programs exposed. Each icon can be secondary clicked (right mouse click for most of us, and an options bar at the bottom, rather than the old small context menu, is opened with some very familiar options.   Notice the top of the Windows Explorer window has some new features. You still have your right mouse click functions, but since the shortcuts for these items already exist..just copy them. There are many ways, but here is a long way to show you more of the interface. 1. Right mouse click a program icon, and select the Open File Location option. 2. Trusty file manager opens…but if you look closely up at top edge of the window, you’ll see a nifty enhancement. An orange colored box that is titled Shortcut Tools and another lavender box Title Application tools. Each of these adds options at the top of the file manager window to make selection easy. Of course, you can still secondary click an item in the listing window too. 3. Click shortcut tools, right click your app shortcut and copy it. Then simply paste it into the desktop outside the File Explorer window Also note some of the newer features. The large icons up top below the menu that has many common operations. The options change as you select each menu item. Well, that’s it for this installment. I hope this helps you out.

    Read the article

  • Power cycles on/off 3 times before booting properly from cold start, no other issues (New System)

    - by James
    Relevant Specs: Sapphire 5850, core i7 920, Seasonic x750 power supply, ECS X58B-A2 mobo. From a cold boot, meaning all power totally disconnected at the wall, the system will power on for less than a second and then power off completely. After two seconds of being powered off this will repeat and on the third "attempt" the computer will boot. To be very specific here is what happens: The power is turned on at the wall and on the psu, the orange stdby LED on the mobo is illuminated but the system is 'off'. I hit the power button on the case or on the mobo itself I hear the relay (?) in the psu closing The case light comes on and the mobo power light comes on. The fans start rotating. Immediately after this the I hear some relay click - the power lights extinguish, the fans stop, the stdby light remains on. Less than 2 seconds pass and the cycle repeats without any intervention from me. On the third attempt it boots normally and the machine runs perfectly. If I do a soft reboot or a full shutdown the computer starts normally the next time. It's only if I pull the power cord or flick the switch off on the PSU that I get the cycling again. Basically any time the stdby light on the mobo goes out. I have removed the graphics card and I get the same problem. I have removed the PSU, hotwired it to the ON position and verified voltages on all lines. The relay does not cycle when I do this. If I connect only the 24 pin ATX connector to the mobo and not the 8 pin ATX12V / CPU connector then I will not get the cycling, the fans run, the power light stays on, but obviously the system can't boot. Disconnecting all fans has no effect on the problem. My feeling it that it's something to do with the motherboard like a capacitor that's taking a long time to charge because it's leaking or something along those lines. But I can't imagine what could be 'wrong' with it and only manifest itself as a problem under these very specific circumstances. Any ideas? Thanks.

    Read the article

  • Slow NFS and GFS2 performance

    - by Tiago
    Recently I've designed and configured a 4 node cluster for a webapp that does lots of file handling. The cluster have been broken down into 2 main roles, webserver and storage. Each role is replicated to a second server using drbd in active/passive mode. The webserver does a NFS mount of the data directory of the storage server and the latter also has a webserver running to serve files to browser clients. In the storage servers I've created a GFS2 FS to hold the data which is wired to drbd. I've chose GFS2 mainly because the announced performance and also because the volume size which has to be pretty high. Since we entered production I've been facing two problems that I think are deeply connected. First of all, the NFS mount on the webservers keeps hanging for a minute or so and then resumes normal operations. By analyzing the logs I've found out that NFS stops answering for a while and outputs the following log lines: Oct 15 18:15:42 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:44 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:46 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:51 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:58 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK In this case, the hang lasted for 16 seconds but sometimes it takes 1 or 2 minutes to resume normal operations. My first guess was this was happening due to heavy load of the NFS mount and that by increasing RPCNFSDCOUNT to a higher value, this would become stable. I've increased it several times and apparently, after a while, the logs started appearing less times. The value is now on 32. After further investigating the issue, I've came across a different hang, despite the NFS messages still appear in the logs. Sometimes, the GFS2 FS simply hangs which causes both the NFS and the storage webserver to serve files. Both stay hang for a while and then they resume normal operations. This hangs leaves no trace on client side (also leaves no NFS ... not responding messages) and, on the storage side, the log system appears to be empty, even though the rsyslogd is running. The nodes connect themselves through a 10Gbps non-dedicated connection but I don't think this is an issue because the GFS2 hang is confirmed but connecting directly to the active storage server. I've been trying to solve this for a while now and I've tried different NFS configuration options, before I've found out the GFS2 FS is also hanging. The NFS mount is exported as such: /srv/data/ <ip_address>(rw,async,no_root_squash,no_all_squash,fsid=25) And the NFS client mounts with: mount -o "async,hard,intr,wsize=8192,rsize=8192" active.storage.vlan:/srv/data /srv/data After some tests, these were the configurations that yielded more performance to the cluster. I am desperate to find a solution for this as the cluster is already in production mode and I need to fix this so that this hangs won't happen in the future and I don't really know for sure what and how I should be benchmarking. What I can tell is that this is happening due to heavy loads as I have tested the cluster earlier and this problems weren't happening at all. Please tell me if you need me to provide configuration details of the cluster, and which do you want me to post. As last resort I can migrate the files to a different FS but I need some solid pointers on whether this will solve this problems as the volume size is extremely large at this point. The servers are being hosted by a third-party enterprise and I don't have physical access to them. Best regards. EDIT 1: The servers are physical servers and their specs are: Webservers: Intel Bi Xeon E5606 2x4 2.13GHz 24GB DDR3 Intel SSD 320 2 x 120GB Raid 1 Storage: Intel i5 3550 3.3GHz 16GB DDR3 12 x 2TB SATA Initially there was a VRack setup between the servers but we've upgraded one of the storage servers to have more RAM and it wasn't inside the VRack. They connect through a shared 10Gbps connection between them. Please note that it is the same connection that is used for public access. They use a single IP (using IP Failover) to connect between them and to allow for a graceful failover. NFS is therefore over a public connection and not under any private network (it was before the upgrade, were the problem still existed). The firewall was configured and tested thoroughly but I disabled it for a while to see if the problem still occurred, and it did. From my knowledge the hosting provider isn't blocking or limiting the connection between either the servers and the public domain (at least under a given bandwidth consumption threshold that hasn't been reached yet). Hope this helps figuring out the problem. EDIT 2: Relevant software versions: CentOS 2.6.32-279.9.1.el6.x86_64 nfs-utils-1.2.3-26.el6.x86_64 nfs-utils-lib-1.1.5-4.el6.x86_64 gfs2-utils-3.0.12.1-32.el6_3.1.x86_64 kmod-drbd84-8.4.2-1.el6_3.elrepo.x86_64 drbd84-utils-8.4.2-1.el6.elrepo.x86_64 DRBD configuration on storage servers: #/etc/drbd.d/storage.res resource storage { protocol C; on <server1 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server1 ip>:7788; meta-disk internal; } on <server2 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server2 ip>:7788; meta-disk internal; } } NFS Configuration in storage servers: #/etc/sysconfig/nfs RPCNFSDCOUNT=32 STATD_PORT=10002 STATD_OUTGOING_PORT=10003 MOUNTD_PORT=10004 RQUOTAD_PORT=10005 LOCKD_UDPPORT=30001 LOCKD_TCPPORT=30001 (can there be any conflict in using the same port for both LOCKD_UDPPORT and LOCKD_TCPPORT?) GFS2 configuration: # gfs2_tool gettune <mountpoint> incore_log_blocks = 1024 log_flush_secs = 60 quota_warn_period = 10 quota_quantum = 60 max_readahead = 262144 complain_secs = 10 statfs_slow = 0 quota_simul_sync = 64 statfs_quantum = 30 quota_scale = 1.0000 (1, 1) new_files_jdata = 0 Storage network environment: eth0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip address> Bcast:<bcast address> Mask:<ip mask> inet6 addr: <ip address> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:957025127 errors:0 dropped:0 overruns:0 frame:0 TX packets:1473338731 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2630984979622 (2.3 TiB) TX bytes:1648430431523 (1.4 TiB) eth0:0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip failover address> Bcast:<bcast address> Mask:<ip mask> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 The IP addresses are statically assigned with the given network configurations: DEVICE="eth0" BOOTPROTO="static" HWADDR=<mac address> ONBOOT="yes" TYPE="Ethernet" IPADDR=<ip address> NETMASK=<net mask> and DEVICE="eth0:0" BOOTPROTO="static" HWADDR=<mac address> IPADDR=<ip failover> NETMASK=<net mask> ONBOOT="yes" BROADCAST=<bcast address> Hosts file to allow for a graceful NFS failover in conjunction with NFS option fsid=25 set on both storage servers: #/etc/hosts <storage ip failover address> active.storage.vlan <webserver ip failover address> active.service.vlan As you can see, packet errors are down to 0. I've also ran ping for a long time without any packet loss. MTU size is the normal 1500. As there is no VLan by now, this is the MTU used to communicate between servers. The webservers' network environment is similar. One thing I forgot to mention is that the storage servers handle ~200GB of new files each day through the NFS connection, which is a key point for me to think this is some kind of heavy load problem with either NFS or GFS2. If you need further configuration details please tell me. EDIT 3: Earlier today we had a major filesystem crash on the storage server. I couldn't get the details of the crash right away because the server stop responding. After the reboot, I noticed the filesystem was extremely slow, and I was not being able to serve a single file through either NFS or httpd, perhaps due to cache warming or so. Nevertheless, I've been monitoring the server closely and the following error came up in dmesg. The source of the problem is clearly GFS, which is waiting for a lock and ends up starving after a while. INFO: task nfsd:3029 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. nfsd D 0000000000000000 0 3029 2 0x00000080 ffff8803814f79e0 0000000000000046 0000000000000000 ffffffff8109213f ffff880434c5e148 ffff880624508d88 ffff8803814f7960 ffffffffa037253f ffff8803815c1098 ffff8803814f7fd8 000000000000fb88 ffff8803815c1098 Call Trace: [<ffffffff8109213f>] ? wake_up_bit+0x2f/0x40 [<ffffffffa037253f>] ? gfs2_holder_wake+0x1f/0x30 [gfs2] [<ffffffff814ff42e>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814ff2cb>] mutex_lock+0x2b/0x50 [<ffffffffa0379f21>] gfs2_log_reserve+0x51/0x190 [gfs2] [<ffffffffa0390da2>] gfs2_trans_begin+0x112/0x1d0 [gfs2] [<ffffffffa0369b05>] ? gfs2_dir_check+0x35/0xe0 [gfs2] [<ffffffffa0377943>] gfs2_createi+0x1a3/0xaa0 [gfs2] [<ffffffff8121aab1>] ? avc_has_perm+0x71/0x90 [<ffffffffa0383d1e>] gfs2_create+0x7e/0x1a0 [gfs2] [<ffffffffa037783f>] ? gfs2_createi+0x9f/0xaa0 [gfs2] [<ffffffff81188cf4>] vfs_create+0xb4/0xe0 [<ffffffffa04217d6>] nfsd_create_v3+0x366/0x4c0 [nfsd] [<ffffffffa0429703>] nfsd3_proc_create+0x123/0x1b0 [nfsd] [<ffffffffa041a43e>] nfsd_dispatch+0xfe/0x240 [nfsd] [<ffffffffa025a5d4>] svc_process_common+0x344/0x640 [sunrpc] [<ffffffff810602a0>] ? default_wake_function+0x0/0x20 [<ffffffffa025ac10>] svc_process+0x110/0x160 [sunrpc] [<ffffffffa041ab62>] nfsd+0xc2/0x160 [nfsd] [<ffffffffa041aaa0>] ? nfsd+0x0/0x160 [nfsd] [<ffffffff81091de6>] kthread+0x96/0xa0 [<ffffffff8100c14a>] child_rip+0xa/0x20 [<ffffffff81091d50>] ? kthread+0x0/0xa0 [<ffffffff8100c140>] ? child_rip+0x0/0x20

    Read the article

  • script to recursively check for and select dependencies

    - by rp.sullivan
    I have written a script that does this but it is one of my first scripts ever so i am sure there is a better way:) Let me know how you would go about doing this. I'm looking for a simple yet efficient way to do this. Here is some important background info: ( It might be a little confusing but hopefully by the end it will make sense. ) 1) This image shows the structure/location of the relevant dirs and files. 2) The packages.file located at ./config/default/config/packages is a space delimited file. field5 is the "package name" which i will call $a for explanations sake. field4 is the name of the dir containing the $a.dir i will call $b field1 shows if the package is selected or not, "X"(capital x) for selected and "O"(capital o as in orange) for not selected. Here is an example of what the packages.file might contain: ... X ---3------ 104.800 database gdbm 1.8.3 / base/library CROSS 0 O -1---5---- 105.000 base libiconv 1.13.1 / base/tool CROSS 0 X 01---5---- 105.000 base pkgconfig 0.25 / base/tool CROSS 0 X -1-3------ 105.000 base texinfo 4.13a / base/tool CROSS DIETLIBC 0 O -----5---- 105.000 develop duma 2_5_15 / base/development CROSS NOPARALLEL 0 O -----5---- 105.000 develop electricfence 2_4_13 / base/development CROSS 0 O -----5---- 105.000 develop gnupth 2.0.7 / extra/development CROSS NOPARALLEL FPIC-QUIRK 0 ... 3) For almost every package listed in the "packages.file" there is a corresponding ".cache file" The .cache file for package $a would be located at ./package/$b/$a/$a.cache The .cache files contain a list of dependencies for that particular package. Here is an example of one of the .cache files might look like. Note that the dependencies are field2 of lines containing "[DEP]" These dependencies are all names of packages in the "package.file" [TIMESTAMP] 1134178701 Sat Dec 10 02:38:21 2005 [BUILDTIME] 295 (9) [SIZE] 11.64 MB, 191 files [DEP] 00-dirtree [DEP] bash [DEP] binutils [DEP] bzip2 [DEP] cf [DEP] coreutils ... So with all that in mind... I'm looking for a shell script that: From within the "main dir" Looks at the ./config/default/config/packages file and finds the "selected" packages and reads the corresponding .cache Then compiles a list of dependencies that excludes the already selected packages Then selects the dependencies (by changing field1 to X) in the ./config/default/config/packages file and repeats until all the dependencies are met Note: The script will ultimately end up in the "scripts dir" and be called from the "main dir". If this is not clear let me know what need clarification. For those interested I'm playing around with T2 SDE. If you are into playing around with linux it might be worth taking a look.

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >