Search Results

Search found 3523 results on 141 pages for 'powershell v2 0'.

Page 54/141 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Why is joining two vectors simply not working?

  - by Jim

  I have two vectors of MyObj structs. MyObj is defined as follows: struct MyObj { float x, y; unsigned int data[8]; unsigned int tmp[1]; MyObj(const MyObj &m) { x = m.x; y = m.y; tmp[0] = 0; for (int i = 0; i < 8; ++i) { data[i] = m.data[i]; } } }; I then have two vectors... vector<MyObj> v1; vector<MyObj> v2; // both get data eventually. v1.insert(v1.end(), v2.begin(), v2.end()); v2 has 3535004 elements in my experiment. v1 is similarly sized. I've also tried building a new vector and just using .push_back to build it from both vectors. Essentially, when I try to merge the two vectors I just get an error from visual studio saying "Debug error! R6010, abort() has been called". Very non-useful... So my question is: what could be causing this error, and how can I solve it? Thank you

  Read the article

• A pseudo-listener for AlwaysOn Availability Groups for SQL Server virtual machines running in Azure

  - by MikeD

  I am involved in a project that is implementing SharePoint 2013 on virtual machines hosted in Azure. The back end data tier consists of two Azure VMs running SQL Server 2012, with the SharePoint databases contained in an AlwaysOn Availability Group. I used this "Tutorial: AlwaysOn Availability Groups in Windows Azure (GUI)" to help me implement this setup.Because Azure DHCP will not assign multiple unique IP addresses to the same VM, having an AG Listener in Azure is not currently supported.  I wanted to figure out another mechanism to support a "pseudo listener" of some sort. First, I created a CNAME (alias) record in the DNS zone with a short TTL (time to live) of 5 minutes (I may yet make this even shorter). The record represents a logical name (let's say the alias is SPSQL) of the server to connect to for the databases in the availability group (AG). When Server1 was hosting the primary replica of the AG, I would set the CNAME of SPSQL to be SERVER1. When the AG failed over to Server1, I wanted to set the CNAME to SERVER2. Seemed simple enough.(It's important to point out that the connection strings for my SharePoint services should use the CNAME alias, and not the actual server name. This whole thing falls apart otherwise.)To accomplish this, I created identical SQL Agent Jobs on Server1 and Server2, with two steps:1. Step 1: Determine if this server is hosting the primary replica.This is a TSQL step using this script:declare @agName sysname = 'AGTest'set nocount on declare @primaryReplica sysnameselect @primaryReplica = agState.primary_replicafrom sys.dm_hadr_availability_group_states agState   join sys.availability_groups ag on agstate.group_id = ag.group_id   where ag.name = @AGname if not exists(   select *    from sys.dm_hadr_availability_group_states agState   join sys.availability_groups ag on agstate.group_id = ag.group_id   where @@Servername = agstate.primary_replica    and ag.name = @AGname)begin   raiserror ('Primary replica of %s is not hosted on %s, it is hosted on %s',17,1,@Agname, @@Servername, @primaryReplica) endThis script determines if the primary replica value of the AG group is the same as the server name, which means that our server is hosting the current AG (you should update the value of the @AgName variable to the name of your AG). If this is true, I want the DNS alias to point to this server. If the current server is not hosting the primary replica, then the script raises an error. Also, if the script can't be executed because it cannot connect to the server, that also will generate an error. For the job step settings, I set the On Failure option to "Quit the job reporting success". The next step in the job will set the DNS alias to this server name, and I only want to do that if I know that it is the current primary replica, otherwise I don't want to do anything. I also include the step output in the job history so I can see the error message.Job Step 2: Update the CNAME entry in DNS with this server's name.I used a PowerShell script to accomplish this:$cname = "SPSQL.contoso.com"$query = "Select * from MicrosoftDNS_CNAMEType"$dns1 = "dc01.contoso.com"$dns2 = "dc02.contoso.com"if ((Test-Connection -ComputerName $dns1 -Count 1 -Quiet) -eq $true){    $dnsServer = $dns1}elseif ((Test-Connection -ComputerName $dns2 -Count 1 -Quiet) -eq $true) {   $dnsServer = $dns2}else{  $msg = "Unable to connect to DNS servers: " + $dns1 + ", " + $dns2   Throw $msg}$record = Get-WmiObject -Namespace "root\microsoftdns" -Query $query -ComputerName $dnsServer  | ? { $_.Ownername -match $cname }$thisServer = [System.Net.Dns]::GetHostEntry("LocalHost").HostName + "."$currentServer = $record.RecordData if ($currentServer -eq $thisServer ) {     $cname + " CNAME is up to date: " + $currentServer}else{    $cname + " CNAME is being updated to " + $thisServer + ". It was " + $currentServer    $record.RecordData = $thisServer    $record.put()}This script does a few things:finds a responsive domain controller (Test-Connection does a ping and returns a Boolean value if you specify the -Quiet parameter)makes a WMI call to the domain controller to get the current CNAME record value (Get-WmiObject)gets the FQDN of this server (GetHostEntry)checks if the CNAME record is correct and updates it if necessary(You should update the values of the variables $cname, $dns1 and $dns2 for your environment.)Since my domain controllers are also hosted in Azure VMs, either one of them could be down at any point in time, so I need to find a DC that is responsive before attempting the DNS call. The other little thing here is that the CNAME record contains the FQDN of a machine, plus it ends with a period. So the comparison of the CNAME record has to take the trailing period into account. When I tested this step, I was getting ACCESS DENIED responses from PowerShell for the Get-WmiObject cmdlet that does a remote lookup on the DC. This occurred because the SQL Agent service account was not a member of the Domain Admins group, so I decided to create a SQL Credential to store the credentials for a domain administrator account and use it as a PowerShell proxy (rather than give the service account Domain Admins membership).In SQL Management Studio, right click on the Credentials node (under the server's Security node), and choose New Credential...Then, under SQL Agent-->Proxies, right click on the PowerShell node and choose New Proxy...Finally, in the job step properties for the PowerShell step, select the new proxy in the Run As drop down.I created this two step Job on both nodes of the Availability Group, but if you had more than two nodes, just create the same job on all the servers. I set the schedule for the job to execute every minute.When the server that is hosting the primary replica is running the job, the job history looks like this:The job history on the secondary server looks like this: When a failover occurs, the SQL Agent job on the new primary replica will detect that the CNAME needs to be updated within a minute. Based on the TTL of the CNAME (which I said at the beginning was 5 minutes), the SharePoint servers will get the new alias within five minutes and should be able to reconnect. I may want to shorten up the TTL to reduce the time it takes for the client connections to use the new alias. Using a DNS CNAME and a SQL Agent Job on all servers hosting AG replicas, I was able to create a pseudo-listener to automatically change the name of the server that was hosting the primary replica, for a scenario where I cannot use a regular AG listener (in this case, because the servers are all hosted in Azure).    

  Read the article

• Creating a Training Lab on Windows Azure

  - by Michael Stephenson

  Originally posted on: http://geekswithblogs.net/michaelstephenson/archive/2013/06/17/153149.aspxThis week we are preparing for a training course that Alan Smith will be running for the support teams at one of my customers around Windows Azure. In order to facilitate the training lab we have a few prerequisites we need to handle. One of the biggest ones is that although the support team all have MSDN accounts the local desktops they work on are not ideal for running most of the labs as we want to give them some additional developer background training around Azure. Some recent Azure announcements really help us in this area: MSDN software can now be used on Azure VM You don't pay for Azure VM's when they are no longer used  Since the support team only have limited experience of Windows Azure and the organisation also have an Enterprise Agreement we decided it would be best value for money to spin up a training lab in a subscription on the EA and then we can turn the machines off when we are done. At the same time we would be able to spin them back up when the users need to do some additional lab work once the training course is completed. In order to achieve this I wanted to create a powershell script which would setup my training lab. The aim was to create 18 VM's which would be based on a prebuilt template with Visual Studio and the Azure development tools. The script I used is described below The Start & Variables The below text will setup the powershell environment and some variables which I will use elsewhere in the script. It will also import the Azure Powershell cmdlets. You can see below that I will need to download my publisher settings file and know some details from my Azure account. At this point I will assume you have a basic understanding of Azure & Powershell so already know how to do this. Set-ExecutionPolicy Unrestrictedcls $startTime = get-dateImport-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\Azure.psd1"# Azure Publisher Settings $azurePublisherSettings = '<Your settings file>.publishsettings'  # Subscription Details $subscriptionName = "<Your subscription name>" $defaultStorageAccount = "<Your default storage account>"  # Affinity Group Details $affinityGroup = '<Your affinity group>' $dataCenter = 'West Europe' # From Get-AzureLocation  # VM Details $baseVMName = 'TRN' $adminUserName = '<Your admin username>' $password = '<Your admin password>' $size = 'Medium' $vmTemplate = '<The name of your VM template image>' $rdpFilePath = '<File path to save RDP files to>' $machineSettingsPath = '<File path to save machine info to>'    Functions In the next section of the script I have some functions which are used to perform certain actions. The first is called CreateVM. This will do the following actions: If the VM already exists it will be deleted Create the cloud service Create the VM from the template I have created Add an endpoint so we can RDP to them all over the same port Download the RDP file so there is a short cut the trainees can easily access the machine via Write settings for the machine to a log file  function CreateVM($machineNo) { # Specify a name for the new VM $machineName = "$baseVMName-$machineNo" Write-Host "Creating VM: $machineName"       # Get the Azure VM Image      $myImage = Get-AzureVMImage $vmTemplate   #If the VM already exists delete and re-create it $existingVm = Get-AzureVM -Name $machineName -ServiceName $serviceName if($existingVm -ne $null) { Write-Host "VM already exists so deleting it" Remove-AzureVM -Name $machineName -ServiceName $serviceName }   "Creating Service" $serviceName = "bupa-azure-train-$machineName" Remove-AzureService -Force -ServiceName $serviceName New-AzureService -Location $dataCenter -ServiceName $serviceName   Write-Host "Creating VM: $machineName" New-AzureQuickVM -Windows -name $machineName -ServiceName $serviceName -ImageName $myImage.ImageName -InstanceSize $size -AdminUsername $adminUserName -Password $password  Write-Host "Updating the RDP endpoint for $machineName" Get-AzureVM -name $machineName -ServiceName $serviceName ` | Add-AzureEndpoint -Name RDP -Protocol TCP -LocalPort 3389 -PublicPort 550 ` | Update-AzureVM    Write-Host "Get the RDP File for machine $machineName" $machineRDPFilePath = "$rdpFilePath\$machineName.rdp" Get-AzureRemoteDesktopFile -name $machineName -ServiceName $serviceName -LocalPath "$machineRDPFilePath"   WriteMachineSettings "$machineName" "$serviceName" }    The delete machine settings function is used to delete the log file before we start re-running the process.  function DeleteMachineSettings() { Write-Host "Deleting the machine settings output file" [System.IO.File]::Delete("$machineSettingsPath"); }    The write machine settings function will get the VM and then record its details to the log file. The importance of the log file is that I can easily provide the information for all of the VM's to our infrastructure team to be able to configure access to all of the VM's    function WriteMachineSettings([string]$vmName, [string]$vmServiceName) { Write-Host "Writing to the machine settings output file"   $vm = Get-AzureVM -name $vmName -ServiceName $vmServiceName $vmEndpoint = Get-AzureEndpoint -VM $vm -Name RDP   $sb = new-object System.Text.StringBuilder $sb.Append("Service Name: "); $sb.Append($vm.ServiceName); $sb.Append(", "); $sb.Append("VM: "); $sb.Append($vm.Name); $sb.Append(", "); $sb.Append("RDP Public Port: "); $sb.Append($vmEndpoint.Port); $sb.Append(", "); $sb.Append("Public DNS: "); $sb.Append($vmEndpoint.Vip); $sb.AppendLine(""); [System.IO.File]::AppendAllText($machineSettingsPath, $sb.ToString());  } # end functions    Rest of Script In the rest of the script it is really just the bit that orchestrates the actions we want to happen. It will load the publisher settings, select the Azure subscription and then loop around the CreateVM function and create 16 VM's  Import-AzurePublishSettingsFile $azurePublisherSettings Set-AzureSubscription -SubscriptionName $subscriptionName -CurrentStorageAccount $defaultStorageAccount Select-AzureSubscription -SubscriptionName $subscriptionName  DeleteMachineSettings    "Starting creating Bupa International Azure Training Lab" $numberOfVMs = 16  for ($index=1; $index -le $numberOfVMs; $index++) { $vmNo = "$index" CreateVM($vmNo); }    "Finished creating Bupa International Azure Training Lab" # Give it a Minute Start-Sleep -s 60  $endTime = get-date "Script run time " + ($endTime - $startTime)    Conclusion As you can see there is nothing too fancy about this script but in our case of creating a small isolated training lab which is not connected to our corporate network then we can easily use this to provision the lab. Im sure if this is of use to anyone you can easily modify it to do other things with the lab environment too. A couple of points to note are that there are some soft limits in Azure about the number of cores and services your subscription can use. You may need to contact the Azure support team to be able to increase this limit. In terms of the real business value of this approach, it was not possible to use the existing desktops to do the training on, and getting some internal virtual machines would have been relatively expensive and time consuming for our ops team to do. With the Azure option we are able to spin these machines up for a temporary period during the training course and then throw them away when we are done. We expect the costing of this test lab to be very small, especially considering we have EA pricing. As a ball park I think my 18 lab VM training environment will cost in the region of $80 per day on our EA. This is a fraction of the cost of the creation of a single VM on premise.

  Read the article

• Windows Azure: Announcing release of Windows Azure SDK 2.2 (with lots of goodies)

  - by ScottGu

  Earlier today I blogged about a big update we made today to Windows Azure, and some of the great new features it provides. Today I’m also excited to also announce the release of the Windows Azure SDK 2.2. Today’s SDK release adds even more great features including: Visual Studio 2013 Support Integrated Windows Azure Sign-In support within Visual Studio Remote Debugging Cloud Services with Visual Studio Firewall Management support within Visual Studio for SQL Databases Visual Studio 2013 RTM VM Images for MSDN Subscribers Windows Azure Management Libraries for .NET Updated Windows Azure PowerShell Cmdlets and ScriptCenter The below post has more details on what’s available in today’s Windows Azure SDK 2.2 release.  Also head over to Channel 9 to see the new episode of the Visual Studio Toolbox show that will be available shortly, and which highlights these features in a video demonstration. Visual Studio 2013 Support Version 2.2 of the Window Azure SDK is the first official version of the SDK to support the final RTM release of Visual Studio 2013. If you installed the 2.1 SDK with the Preview of Visual Studio 2013 we recommend that you upgrade your projects to SDK 2.2.  SDK 2.2 also works side by side with the SDK 2.0 and SDK 2.1 releases on Visual Studio 2012: Integrated Windows Azure Sign In within Visual Studio Integrated Windows Azure Sign-In support within Visual Studio is one of the big improvements added with this Windows Azure SDK release.  Integrated sign-in support enables developers to develop/test/manage Windows Azure resources within Visual Studio without having to download or use management certificates.  You can now just right-click on the “Windows Azure” icon within the Server Explorer inside Visual Studio and choose the “Connect to Windows Azure” context menu option to connect to Windows Azure: Doing this will prompt you to enter the email address of the account you wish to sign-in with: You can use either a Microsoft Account (e.g. Windows Live ID) or an Organizational account (e.g. Active Directory) as the email.  The dialog will update with an appropriate login prompt depending on which type of email address you enter: Once you sign-in you’ll see the Windows Azure resources that you have permissions to manage show up automatically within the Visual Studio Server Explorer (and you can start using them): With this new integrated sign in experience you are now able to publish web apps, deploy VMs and cloud services, use Windows Azure diagnostics, and fully interact with your Windows Azure services within Visual Studio without the need for a management certificate.  All of the authentication is handled using the Windows Azure Active Directory associated with your Windows Azure account (details on this can be found in my earlier blog post). Integrating authentication this way end-to-end across the Service Management APIs + Dev Tools + Management Portal + PowerShell automation scripts enables a much more secure and flexible security model within Windows Azure, and makes it much more convenient to securely manage multiple developers + administrators working on a project.  It also allows organizations and enterprises to use the same authentication model that they use for their developers on-premises in the cloud.  It also ensures that employees who leave an organization immediately lose access to their company’s cloud based resources once their Active Directory account is suspended. Filtering/Subscription Management Once you login within Visual Studio, you can filter which Windows Azure subscriptions/regions are visible within the Server Explorer by right-clicking the “Filter Services” context menu within the Server Explorer.  You can also use the “Manage Subscriptions” context menu to mange your Windows Azure Subscriptions: Bringing up the “Manage Subscriptions” dialog allows you to see which accounts you are currently using, as well as which subscriptions are within them: The “Certificates” tab allows you to continue to import and use management certificates to manage Windows Azure resources as well.  We have not removed any functionality with today’s update – all of the existing scenarios that previously supported management certificates within Visual Studio continue to work just fine.  The new integrated sign-in support provided with today’s release is purely additive. Note: the SQL Database node and the Mobile Service node in Server Explorer do not support integrated sign-in at this time. Therefore, you will only see databases and mobile services under those nodes if you have a management certificate to authorize access to them.  We will enable them with integrated sign-in in a future update. Remote Debugging Cloud Resources within Visual Studio Today’s Windows Azure SDK 2.2 release adds support for remote debugging many types of Windows Azure resources. With live, remote debugging support from within Visual Studio, you are now able to have more visibility than ever before into how your code is operating live in Windows Azure.  Let’s walkthrough how to enable remote debugging for a Cloud Service: Remote Debugging of Cloud Services To enable remote debugging for your cloud service, select Debug as the Build Configuration on the Common Settings tab of your Cloud Service’s publish dialog wizard: Then click the Advanced Settings tab and check the Enable Remote Debugging for all roles checkbox: Once your cloud service is published and running live in the cloud, simply set a breakpoint in your local source code: Then use Visual Studio’s Server Explorer to select the Cloud Service instance deployed in the cloud, and then use the Attach Debugger context menu on the role or to a specific VM instance of it: Once the debugger attaches to the Cloud Service, and a breakpoint is hit, you’ll be able to use the rich debugging capabilities of Visual Studio to debug the cloud instance remotely, in real-time, and see exactly how your app is running in the cloud. Today’s remote debugging support is super powerful, and makes it much easier to develop and test applications for the cloud.  Support for remote debugging Cloud Services is available as of today, and we’ll also enable support for remote debugging Web Sites shortly. Firewall Management Support with SQL Databases By default we enable a security firewall around SQL Databases hosted within Windows Azure.  This ensures that only your application (or IP addresses you approve) can connect to them and helps make your infrastructure secure by default.  This is great for protection at runtime, but can sometimes be a pain at development time (since by default you can’t connect/manage the database remotely within Visual Studio if the security firewall blocks your instance of VS from connecting to it). One of the cool features we’ve added with today’s release is support that makes it easy to enable and configure the security firewall directly within Visual Studio.  Now with the SDK 2.2 release, when you try and connect to a SQL Database using the Visual Studio Server Explorer, and a firewall rule prevents access to the database from your machine, you will be prompted to add a firewall rule to enable access from your local IP address: You can simply click Add Firewall Rule and a new rule will be automatically added for you. In some cases, the logic to detect your local IP may not be sufficient (for example: you are behind a corporate firewall that uses a range of IP addresses) and you may need to set up a firewall rule for a range of IP addresses in order to gain access. The new Add Firewall Rule dialog also makes this easy to do.  Once connected you’ll be able to manage your SQL Database directly within the Visual Studio Server Explorer: This makes it much easier to work with databases in the cloud. Visual Studio 2013 RTM Virtual Machine Images Available for MSDN Subscribers Last week we released the General Availability Release of Visual Studio 2013 to the web.  This is an awesome release with a ton of new features. With today’s Windows Azure update we now have a set of pre-configured VM images of VS 2013 available within the Windows Azure Management Portal for use by MSDN customers.  This enables you to create a VM in the cloud with VS 2013 pre-installed on it in with only a few clicks: Windows Azure now provides the fastest and easiest way to get started doing development with Visual Studio 2013. Windows Azure Management Libraries for .NET (Preview) Having the ability to automate the creation, deployment, and tear down of resources is a key requirement for applications running in the cloud.  It also helps immensely when running dev/test scenarios and coded UI tests against pre-production environments. Today we are releasing a preview of a new set of Windows Azure Management Libraries for .NET.  These new libraries make it easy to automate tasks using any .NET language (e.g. C#, VB, F#, etc).  Previously this automation capability was only available through the Windows Azure PowerShell Cmdlets or to developers who were willing to write their own wrappers for the Windows Azure Service Management REST API. Modern .NET Developer Experience We’ve worked to design easy-to-understand .NET APIs that still map well to the underlying REST endpoints, making sure to use and expose the modern .NET functionality that developers expect today: Portable Class Library (PCL) support targeting applications built for any .NET Platform (no platform restriction) Shipped as a set of focused NuGet packages with minimal dependencies to simplify versioning Support async/await task based asynchrony (with easy sync overloads) Shared infrastructure for common error handling, tracing, configuration, HTTP pipeline manipulation, etc. Factored for easy testability and mocking Built on top of popular libraries like HttpClient and Json.NET Below is a list of a few of the management client classes that are shipping with today’s initial preview release: .NET Class Name Supports Operations for these Assets (and potentially more) ManagementClient Locations Credentials Subscriptions Certificates ComputeManagementClient Hosted Services Deployments Virtual Machines Virtual Machine Images & Disks StorageManagementClient Storage Accounts WebSiteManagementClient Web Sites Web Site Publish Profiles Usage Metrics Repositories VirtualNetworkManagementClient Networks Gateways Automating Creating a Virtual Machine using .NET Let’s walkthrough an example of how we can use the new Windows Azure Management Libraries for .NET to fully automate creating a Virtual Machine. I’m deliberately showing a scenario with a lot of custom options configured – including VHD image gallery enumeration, attaching data drives, network endpoints + firewall rules setup - to show off the full power and richness of what the new library provides. We’ll begin with some code that demonstrates how to enumerate through the built-in Windows images within the standard Windows Azure VM Gallery.  We’ll search for the first VM image that has the word “Windows” in it and use that as our base image to build the VM from.  We’ll then create a cloud service container in the West US region to host it within: We can then customize some options on it such as setting up a computer name, admin username/password, and hostname.  We’ll also open up a remote desktop (RDP) endpoint through its security firewall: We’ll then specify the VHD host and data drives that we want to mount on the Virtual Machine, and specify the size of the VM we want to run it in: Once everything has been set up the call to create the virtual machine is executed asynchronously In a few minutes we’ll then have a completely deployed VM running on Windows Azure with all of the settings (hard drives, VM size, machine name, username/password, network endpoints + firewall settings) fully configured and ready for us to use: Preview Availability via NuGet The Windows Azure Management Libraries for .NET are now available via NuGet. Because they are still in preview form, you’ll need to add the –IncludePrerelease switch when you go to retrieve the packages. The Package Manager Console screen shot below demonstrates how to get the entire set of libraries to manage your Windows Azure assets: You can also install them within your .NET projects by right clicking on the VS Solution Explorer and using the Manage NuGet Packages context menu command.  Make sure to select the “Include Prerelease” drop-down for them to show up, and then you can install the specific management libraries you need for your particular scenarios: Open Source License The new Windows Azure Management Libraries for .NET make it super easy to automate management operations within Windows Azure – whether they are for Virtual Machines, Cloud Services, Storage Accounts, Web Sites, and more.  Like the rest of the Windows Azure SDK, we are releasing the source code under an open source (Apache 2) license and it is hosted at https://github.com/WindowsAzure/azure-sdk-for-net/tree/master/libraries if you wish to contribute. PowerShell Enhancements and our New Script Center Today, we are also shipping Windows Azure PowerShell 0.7.0 (which is a separate download). You can find the full change log here. Here are some of the improvements provided with it: Windows Azure Active Directory authentication support Script Center providing many sample scripts to automate common tasks on Windows Azure New cmdlets for Media Services and SQL Database Script Center Windows Azure enables you to script and automate a lot of tasks using PowerShell.  People often ask for more pre-built samples of common scenarios so that they can use them to learn and tweak/customize. With this in mind, we are excited to introduce a new Script Center that we are launching for Windows Azure. You can learn about how to scripting with Windows Azure with a get started article. You can then find many sample scripts across different solutions, including infrastructure, data management, web, and more: All of the sample scripts are hosted on TechNet with links from the Windows Azure Script Center. Each script is complete with good code comments, detailed descriptions, and examples of usage. Summary Visual Studio 2013 and the Windows Azure SDK 2.2 make it easier than ever to get started developing rich cloud applications. Along with the Windows Azure Developer Center’s growing set of .NET developer resources to guide your development efforts, today’s Windows Azure SDK 2.2 release should make your development experience more enjoyable and efficient. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Part 2&ndash;Load Testing In The Cloud

  - by Tarun Arora

  Welcome to Part 2, In Part 1 we discussed the advantages of creating a Test Rig in the cloud, the Azure edge and the Test Rig Topology we want to get to. In Part 2, Let’s start by understanding the components of Azure we’ll be making use of followed by manually putting them together to create the test rig, so… let’s get down dirty start setting up the Test Rig.  What Components of Azure will I be using for building the Test Rig in the Cloud? To run the Test Agents we’ll make use of Windows Azure Compute and to enable communication between Test Controller and Test Agents we’ll make use of Windows Azure Connect.  Azure Connect The Test Controller is on premise and the Test Agents are in the cloud (How will they talk?). To enable communication between the two, we’ll make use of Windows Azure Connect. With Windows Azure Connect, you can use a simple user interface to configure IPsec protected connections between computers or virtual machines (VMs) in your organization’s network, and roles running in Windows Azure. With this you can now join Windows Azure role instances to your domain, so that you can use your existing methods for domain authentication, name resolution, or other domain-wide maintenance actions. For more details refer to an overview of Windows Azure connect. A very useful video explaining everything you wanted to know about Windows Azure connect.  Azure Compute Windows Azure compute provides developers a platform to host and manage applications in Microsoft’s data centres across the globe. A Windows Azure application is built from one or more components called ‘roles.’ Roles come in three different types: Web role, Worker role, and Virtual Machine (VM) role, we’ll be using the Worker role to set up the Test Agents. A very nice blog post discussing the difference between the 3 role types. Developers are free to use the .NET framework or other software that runs on Windows with the Worker role or Web role. Developers can also create applications using languages such as PHP and Java. More on Windows Azure Compute. Each Windows Azure compute instance represents a virtual server... Virtual Machine Size CPU Cores Memory Cost Per Hour Extra Small Shared 768 MB $0.04 Small 1 1.75 GB $0.12 Medium 2 3.50 GB $0.24 Large 4 7.00 GB $0.48 Extra Large 8 14.00 GB $0.96   You might want to review the Windows Azure Pricing FAQ. Let’s Get Started building the Test Rig… Configuration Machine Role Comments VM – 1 Domain Controller for Playpit.com On Premise VM – 2 TFS, Test Controller On Premise VM – 3 Test Agent Cloud   In this blog post I would assume that you have the domain, Team Foundation Server and Test Controller Installed and set up already. If not, please refer to the TFS 2010 Installation Guide and this walkthrough on MSDN to set up your Test Controller. You can also download a preconfigured TFS 2010 VM from Brian Keller's blog, Brian also has some great hands on Labs on TFS 2010 that you may want to explore. I. Lets start building VM – 3: The Test Agent Download the Windows Azure SDK and Tools Open Visual Studio and create a new Windows Azure Project using the Cloud Template                   Choose the Worker Role for reasons explained in the earlier post         The WorkerRole.cs implements the Run() and OnStart() methods, no code changes required. You should be able to compile the project and run it in the compute emulator (The compute emulator should have been installed as part of the Windows Azure Toolkit) on your local machine.                   We will only be making changes to WindowsAzureProject, open ServiceDefinition.csdef. Ensure that the vmsize is small (remember the cost chart above). Import the “Connect” module. I am importing the Connect module because I need to join the Worker role VM to the Playpit domain. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="WorkerRole1" vmsize="Small"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="Connect"/> </Imports> </WorkerRole> </ServiceDefinition> Go to the ServiceConfiguration.Cloud.cscfg and note that settings with key ‘Microsoft.WindowsAzure.Plugins.Connect.%%%%’ have been added to the configuration file. This is because you decided to import the connect module. See the config below. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="1" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> </ConfigurationSettings> </Role> </ServiceConfiguration>             Let’s go step by step and understand all the highlighted parameters and where you can find the values for them.       osFamily – By default this is set to 1 (Windows Server 2008 SP2). Change this to 2 if you want the Windows Server 2008 R2 operating system. The Advantage of using osFamily = “2” is that you get Powershell 2.0 rather than Powershell 1.0. In Powershell 2.0 you could simply use “powershell -ExecutionPolicy Unrestricted ./myscript.ps1” and it will work while in Powershell 1.0 you will have to change the registry key by including the following in your command file “reg add HKLM\Software\Microsoft\PowerShell\1\ShellIds\Microsoft.PowerShell /v ExecutionPolicy /d Unrestricted /f” before you can execute any power shell. The other reason you might want to move to os2 is if you wanted IIS 7.5.       Activation Token – To enable communication between the on premise machine and the Windows Azure Worker role VM both need to have the same token. Log on to Windows Azure Management Portal, click on Connect, click on Get Activation Token, this should give you the activation token, copy the activation token to the clipboard and paste it in the configuration file. Note – Later in the blog I’ll be showing you how to install connect on the on premise machine.                       EnableDomainJoin – Set the value to true, ofcourse we want to join the on windows azure worker role VM to the domain.       DomainFQDN, DomainControllerFQDN, DomainAccountName, DomainPassword, DomainOU, Administrators – This information is specific to your domain. I have extracted this information from the ‘service manager’ and ‘Active Directory Users and Computers’. Also, i created a new Domain-OU namely ‘CloudInstances’ so all my cloud instances joined to my domain show up here, this is optional. You can encrypt the DomainPassword – refer to the instructions here. Or hold fire, I’ll be covering that when i come to certificates and encryption in the coming section.       Now once you have filled all this information up, the configuration file should look something like below, <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="2" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="45f55fea-f194-4fbc-b36e-25604faac784" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="WIN-KUDQMQFGQOL.play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="************************" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="OU=CloudInstances, DC=Play, DC=Pit, DC=com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="Playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> </ConfigurationSettings> </Role> </ServiceConfiguration> Next we will be enabling the Remote Desktop module in to the ServiceDefinition.csdef, we could make changes manually or allow a beautiful wizard to help us make changes. I prefer the second option. So right click on the Windows Azure project and choose Publish       Now once you get the publish wizard, if you haven’t already you would be asked to import your Windows Azure subscription, this is simply the Msdn subscription activation key xml. Once you have done click Next to go to the Settings page and check ‘Enable Remote Desktop for all roles’.       As soon as you do that you get another pop up asking you the details for the user that you would be logging in with (make sure you enter a reasonable expiry date, you do not want the user account to expire today). Notice the more information tag at the bottom, click that to get access to the certificate section. See screen shot below.       From the drop down select the option to create a new certificate        In the pop up window enter the friendly name for your certificate. In my case I entered ‘WAC – Test Rig’ and click ok. This will create a new certificate for you. Click on the view button to see the certificate details. Do you see the Thumbprint, this is the value that will go in the config file (very important). Now click on the Copy to File button to copy the certificate, we will need to import the certificate to the windows Azure Management portal later. So, make sure you save it a safe location.                                Click Finish and enter details of the user you would like to create with permissions for remote desktop access, once you have entered the details on the ‘Remote desktop configuration’ screen click on Ok. From the Publish Windows Azure Wizard screen press Cancel. Cancel because we don’t want to publish the role just yet and Yes because we want to save all the changes in the config file.       Now if you go to the ServiceDefinition.csdef file you will see that the RemoteAccess and RemoteForwarder roles have been imported for you. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="WorkerRole1" vmsize="Small"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="Connect" /> <Import moduleName="RemoteAccess" /> <Import moduleName="RemoteForwarder" /> </Imports> </WorkerRole> </ServiceDefinition> Now go to the ServiceConfiguration.Cloud.cscfg file and you see a whole bunch for setting “Microsoft.WindowsAzure.Plugins.RemoteAccess.%%%” values added for you. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="2" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="45f55fea-f194-4fbc-b36e-25604faac784" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="WIN-KUDQMQFGQOL.play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="************************" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="OU=CloudInstances, DC=Play, DC=Pit, DC=com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="Playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.Enabled" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountUsername" value="Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountEncryptedPassword" value="MIIBnQYJKoZIhvcNAQcDoIIBjjCCAYoCAQAxggFOMIIBSgIBADAyMB4xHDAaBgNVBAMME1dpbmRvd 3MgQXp1cmUgVG9vbHMCEGa+B46voeO5T305N7TSG9QwDQYJKoZIhvcNAQEBBQAEggEABg4ol5Xol66Ip6QKLbAPWdmD4ae ADZ7aKj6fg4D+ATr0DXBllZHG5Umwf+84Sj2nsPeCyrg3ZDQuxrfhSbdnJwuChKV6ukXdGjX0hlowJu/4dfH4jTJC7sBWS AKaEFU7CxvqYEAL1Hf9VPL5fW6HZVmq1z+qmm4ecGKSTOJ20Fptb463wcXgR8CWGa+1w9xqJ7UmmfGeGeCHQ4QGW0IDSBU6ccg vzF2ug8/FY60K1vrWaCYOhKkxD3YBs8U9X/kOB0yQm2Git0d5tFlIPCBT2AC57bgsAYncXfHvPesI0qs7VZyghk8LVa9g5IqaM Cp6cQ7rmY/dLsKBMkDcdBHuCTAzBgkqhkiG9w0BBwEwFAYIKoZIhvcNAwcECDRVifSXbA43gBApNrp40L1VTVZ1iGag+3O1" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountExpiration" value="2012-11-27T23:59:59.0000000+00:00" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteForwarder.Enabled" value="true" /> </ConfigurationSettings> <Certificates> <Certificate name="Microsoft.WindowsAzure.Plugins.RemoteAccess.PasswordEncryption" thumbprint="AA23016CF0BDFC344400B5B82706B608B92E4217" thumbprintAlgorithm="sha1" /> </Certificates> </Role> </ServiceConfiguration>          Okay let’s look at them one at a time,       Enabled - Yes, we would like to enable Remote Access.       AccountUserName – This is the user name you entered while you were on the publish windows azure role screen, as detailed above.       AccountEncrytedPassword – Try and decode that, the certificate is used to encrypt the password you specified for the user account. Remember earlier i said, either use the instructions or wait and i’ll be showing you encryption, now the user account i am using for rdp has the same password as my domain password, so i can simply copy the value of the AccountEncryptedPassword to the DomainPassword as well.       AccountExpiration – This is the expiration as you specified in the wizard earlier, make sure your account does not expire today.       Remote Forwarder – Check out the documentation, below is how I understand it, -- One role in an application that implements a remote desktop connection must import the RemoteForwarder module. The two modules work together to enable the remote desktop connections to role instances. -- If you have multiple roles defined in the service model, it does not matter which role you add the RemoteForwarder module to, but you must add it to only one of the role definitions.       Certificate – Remember the certificate thumbprint from the wizard, the on premise machine and windows azure role machine that need to speak to each other must have the same thumbprint. More on that when we install Windows Azure connect Endpoints on the on premise machine. As i said earlier, in this blog post, I’ll be showing you the manual process so i won’t be scripting any star up tasks to install the test agent or register the test agent with the TFS Server. I’ll be showing you all this cool stuff in the next blog post, that’s because it’s important to understand the manual side of it, it becomes easier for you to troubleshoot in case something fails. Having said that, the changes we have made are sufficient to spin up the Windows Azure Worker Role aka Test Agent VM, have it connected with the play.pit.com domain and have remote access enabled on it. Before we deploy the Test Agent VM we need to set up Windows Azure Connect on the TFS Server. II. Windows Azure Connect: Setting up Connect on VM – 2 i.e. TFS & Test Controller Glad you made it so far, now to enable communication between the on premise TFS/Test Controller and Azure-ed Test Agent we need to enable communication. We have set up the Azure connect module in the Test Agent configuration, now the connect end points need to be enabled on the on premise machines, let’s have a look at how we can do this. Log on to VM – 2 running the TFS Server and Test Controller Log on to the Windows Azure Management Portal and click on Virtual Network Click on Virtual Network, if you already have a subscription you should see the below screen shot, if not, you would be asked to complete the subscription first        Click on Install Local Endpoints from the top left on the panel and you get a url appended with a token id in it, remember the token i showed you earlier, in theory the token you get here should match the token you added to the Test Agent config file.        Copy the url to the clip board and paste it in IE explorer (important, the installation at present only works out of IE and you need to have cookies enabled in order to complete the installation). As stated in the pop up, you can NOT download and run the software later, you need to run it as is, since it contains a token. Once the installation completes you should see the Windows Azure connect icon in the system tray.                         Right click the Azure Connect icon, choose Diagnostics and refer to this link for diagnostic detail terminology. NOTE – Unfortunately I could not see the Windows Azure connect icon in the system tray, a bit of binging with Google revealed that the azure connect icon is only shown when the ‘Windows Azure Connect Endpoint’ Service is started. So go to services.msc and make sure that the service is started, if not start it, unfortunately again, the service did not start for me on a manual start and i realised that one of the dependant services was disabled, you can look at the service dependencies and start them and then start windows azure connect. Bottom line, you need to start Windows Azure connect service before you can proceed. Please refer here on MSDN for more on Troubleshooting Windows Azure connect. (Follow the next step as well)   Now go back to the Windows Azure Management Portal and from Groups and Roles create a new group, lets call it ‘Test Rig’. Make sure you add the VM – 2 (the TFS Server VM where you just installed the endpoint).       Now if you go back to the Azure Connect icon in the system tray and click ‘Refresh Policy’ you will notice that the disconnected status of the icon should change to ready for connection. III. Importing Certificate in to Windows Azure Management Portal But before that you need to import the certificate you created in Step I in to the Windows Azure Management Portal. Log on to the Windows Azure Management Portal and click on ‘Hosted Services, Storage Accounts & CDN’ and then ‘Management Certificates’ followed by Add Certificates as shown in the screen shot below        Browse to the location where you saved the certificate earlier, remember… Refer to Step I in case you forgot.        Now you should be able to see the imported certificate here, make sure the thumbprint of the certificate matches the one you inserted in the config files        IV. Publish Windows Azure Worker Role aka Test Agent Having completed I, II and III, you are ready to publish the Test Agent VM – 3 to the cloud. Go to Visual Studio and right click the Windows Azure project and select Publish. Verify the infomration in the wizard, from the advanced settings tab, you can also enabled capture of intellitrace or profiling information.         Click Next and Click Publish! From the view menu bar select the Windows Azure Activity Log window.       Now you should be able to see the deployment progress in real time.             In the Windows Azure Management Portal, you should also be able to see the progress of creation of a new Worker Role.       Once the deployment is complete you should be able to RDP (go to run prompt type mstsc and in the pop up the machine name) in to the Test Agent Worker Role VM from the Playpit network using the domain admin user account. In case you are unable to log in to the Test Agent using the domain admin user account it means the process of joining the Test Agent to the domain has failed! But the good news is, because you imported the connect module, you can connect to the Test Agent machine using Windows Azure Management Portal and troubleshoot the reason for failure, you will be able to log in with the user name and password you specified in the config file for the keys ‘RemoteAccess.AccountUsername, RemoteAccess.EncryptedPassword (just that enter the password unencrypted)’, fix it or manually join the machine to the domain. Once you have managed to Join the Test Agent VM to the Domain move to the next step.      So, log in to the Test Agent Worker Role VM with the Playpit Domain Administrator and verify that you can log in, the machine is connected to the domain and the connect service is successfully running. If yes, give your self a pat on the back, you are 80% mission accomplished!         Go to the Windows Azure Management Portal and click on Virtual Network, click on Groups and Roles and click on Test Rig, click Edit Group, the edit the Test Rig group you created earlier. In the Connect to section, click on Add to select the worker role you have just deployed. Also, check the ‘Allow connections between endpoints in the group’ with this you will enable to communication between test controller and test agents and test agents/test agents. Click Save.      Now, you are ready to deploy the Test Agent software on the Worker Role Test Agent VM and configure it to work with the Test Controller. V. Configuring VM – 3: Installing Test Agent and Associating Test Agent to Controller Log in to the Worker Role Test Agent VM that you have just successfully deployed, make sure you log in with the domain administrator account. Download the All Agents software from MSDN, ‘en_visual_studio_agents_2010_x86_x64_dvd_509679.iso’, extract the iso and navigate to where you have extracted the iso. In my case, i have extracted the iso to “C:\Resources\Temp\VsAgentSetup”. Open the Test Agent folder and double click on setup.exe. Once you have installed the Test Agent you should reach the configuration window. If you face any issues installing TFS Test Agent on the VM, refer to the walkthrough on MSDN.       Once you have successfully installed the Test Agent software you will need to configure the test agent. Right click the test agent configuration tool and run as a different user. i.e. an Administrator. This is really to run the configuration wizard with elevated privileges (you might have UAC block something's otherwise).        In the run options, you can select ‘service’ you do not need to run the agent as interactive un less you are running coded UI tests. I have specified the domain administrator to connect to the TFS Test Controller. In real life, i would never do that, i would create a separate test user service account for this purpose. But for the blog post, we are using the most powerful user so that any policies or restrictions don’t block you.        Click the Apply Settings button and you should be all green! If not, the summary usually gives helpful error messages that you can resolve and proceed. As per my experience, you may run in to either a permission or a firewall blocking communication issue.        And now the moment of truth! Go to VM –2 open up Visual Studio and from the Test Menu select Manage Test Controller       Mission Accomplished! You should be able to see the Test Agent that you have just configured here,         VI. Creating and Running Load Tests on your brand new Azure-ed Test Rig I have various blog posts on Performance Testing with Visual Studio Ultimate, you can follow the links and videos below, Blog Posts: - Part 1 – Performance Testing using Visual Studio 2010 Ultimate - Part 2 – Performance Testing using Visual Studio 2010 Ultimate - Part 3 – Performance Testing using Visual Studio 2010 Ultimate Videos: - Test Tools Configuration & Settings in Visual Studio - Why & How to Record Web Performance Tests in Visual Studio Ultimate - Goal Driven Load Testing using Visual Studio Ultimate Now that you have created your load tests, there is one last change you need to make before you can run the tests on your Azure Test Rig, create a new Test settings file, and change the Test Execution method to ‘Remote Execution’ and select the test controller you have configured the Worker Role Test Agent against in our case VM – 2 So, go on, fire off a test run and see the results of the test being executed on the Azur-ed Test Rig. Review and What’s next? A quick recap of the benefits of running the Test Rig in the cloud and what i will be covering in the next blog post AND I would love to hear your feedback! Advantages Utilizing the power of Azure compute to run a heavy virtual user load. Benefiting from the Azure flexibility, destroy Test Agents when not in use, takes < 25 minutes to spin up a new Test Agent. Most important test Network Latency, (network latency and speed of connection are two different things – usually network latency is very hard to test), by placing the Test Agents in Microsoft Data centres around the globe, one can actually test the lag in transferring the bytes not because of a slow connection but because the page has been requested from the other side of the globe. Next Steps The process of spinning up the Test Agents in windows Azure is not 100% automated. I am working on the Worker process and power shell scripts to make the role deployment, unattended install of test agent software and registration of the test agent to the test controller automated. In the next blog post I will show you how to make the complete process unattended and automated. Remember to subscribe to http://feeds.feedburner.com/TarunArora. Hope you enjoyed this post, I would love to hear your feedback! If you have any recommendations on things that I should consider or any questions or feedback, feel free to leave a comment. See you in Part III.   Share this post : CodeProject

  Read the article

• How can ASP.NET's "Request Wait Time" be 0 when "Requests Queued" is consistently in the hundreds?

  - by ondrej

  I'm curious why Performance Monitor claims I always have a few hundred ASP.NET 3.5 requests "queued". The "Requests Queued" "ASP.NET v2.0.50727" performance counter is hovering in the few-hundred range despite the fact "Request Wait Time" is consistently 0. If each and every request never waits even a fraction of a millisecond, how could it be in the queue? The "ASP.NET Apps v2.0.50727" counters for "Requests In Application Queue" and "Request Wait Time" are always 0.

  Read the article

• How to restore SharePoint 2010 Foundation after PC renaming?

  - by Drake

  I renamed local PC name and after reboot SharePoint 2010 Foundation does not work anymore. At this page it is described to use the PowerShell command: Rename-SPServer [-Identity] <OriginalServerName> -Name <NewServerName> I launched PowerShell with Administrator permissions but the execution failed with the message "Rename-SPServer : The farm is unavailable" Do you known which could be the problem?

  Read the article

• How to email output of scheduled tasks?

  - by Starfish

  On Unix systems, the scheduled task service will email any output that a scheduled task produces. If no output is produced, no email is sent. How can I do the same thing on Windows Server 2003 or 2008? Is there a way to call a batch file or executable that will run my task, capture the output, and email it only if there is output? If you propose a PowerShell solution, please note that I only have PowerShell 1.0.

  Read the article

• What's a quick and dirty way to get a user list with login time from active directory?

  - by Andrei D

  Im trying to obtain a list of users with their login time (n times if they have logged in more than once) in a particular timespan, for example between 2pm and 3pm on 10/10/2012. I've been fiddling around with powershell, but couldn't get much out of it, downloaded the PowerShell extensions from Quest, tried out some snippets, but I couldn't find something that fits my needs. My guess is to query the events on the Active Directory server but haven't been able to get a snippet that works so far.

  Read the article

• Returning objects with autorelease but I still leak memory

  - by gok

  I am leaking memory on this: my custom class: + (id)vectorWithX:(float)dimx Y:(float)dimy{ return [[[Vector alloc] initVectorWithX:dimx Y:dimy] autorelease]; } - (Vector*)add:(Vector*)q { return [[[Vector vectorWithX:x+q.x Y:y+q.y] retain] autorelease]; } in app delegate I initiate it: Vector *v1 = [[Vector alloc] initVector]; Vector *v2 = [[Vector alloc] initVector]; Vector *vtotal = [[v1 add:v2] retain]; [v1 release]; [v2 release]; [vtotal release]; How this leaks? I release or autorelease them properly. The app crashes immediately if I don't retain these, because of an early release I guess. It also crashes if I add another release.

  Read the article

• Operator overloading outside class

  - by bobobobo

  There are two ways to overload operators for a C++ class: Inside class class Vector2 { public: float x, y ; Vector2 operator+( const Vector2 & other ) { Vector2 ans ; ans.x = x + other.x ; ans.y = y + other.y ; return ans ; } } ; Outside class class Vector2 { public: float x, y ; } ; Vector2 operator+( const Vector2& v1, const Vector2& v2 ) { Vector2 ans ; ans.x = v1.x + v2.x ; ans.y = v1.y + v2.y ; return ans ; } (Apparently in C# you can only use the "outside class" method.) In C++, which way is more correct? Which is preferable?

  Read the article

• [iPhone] Objective-C : UIScrollView manual paging

  - by Daniel

  Hi Folks! I want to use the scrollview as something like a picker in horizontal mode. The scrollview holds up to seven subviews. Each subview represents a value. Always three views are visible and the one in the middle is the selected one. Scrollview visible at start: __ | V1 | V2 Scrollview set to view/value two: V1 | V2 | V3 Scrollview set to last value: V2 | V3 | __ The real problem I have got is the "pagingEnabled" flag. If pagingEnabled is set to YES the scrollview pages always three subviews/values instead of only one. If pagingEnabled is set to NO the scrollview does not clinch. Is there a nice solution for my problem? Thanks a lot, Dan ;)

  Read the article

• Installing Mapnik 2.2.0 in windows 7 with Python 2.7

  - by Joan Natalie

  I've been trying to install mapnik on my computer for hours but what i always get when I import mapnik is ImportError: DLL load failed: The specified procedure could not be found. I'm using Windows 7. The currently installed software is Geoserver from Opengeo suite. Here is my path %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\Java\jre7\bin;C:\Program Files\Java\jdk1.7.0_45\bin;C:\Python27;C:\mapnik-v2.2.0\lib My python path: C:\Python27;C:\Python27\Lib;C:\Python27\DLLs;C:\Python27\Lib\lib-tk;C:\Program Files\ArcGIS\bin;C:\\mapnik-v2.2.0\python\2.7\site-packages\;C:\mapnik-v2.2.0\bin\;

  Read the article

• Operator overloading C++ outside class

  - by bobobobo

  Well, so there are 2 ways to overload operators for a C++ class INSIDE CLASS class Vector2 { public: float x, y ; Vector2 operator+( const Vector2 & other ) { Vector2 ans ; ans.x = x + other.x ; ans.y = y + other.y ; return ans ; } } ; OUTSIDE CLASS class Vector2 { public: float x, y ; } ; Vector2 operator+( const Vector2& v1, const Vector2& v2 ) { Vector2 ans ; ans.x = v1.x + v2.x ; ans.y = v1.y + v2.y ; return ans ; } In C# apparently you can only use the OUTSIDE class method The question is, in C++, which is "morer-correcter?" Which is preferable? When is one way better than another?

  Read the article

• OAuth java implementation, oauth_callback missing

  - by l245c4l

  Hey, My problem is I get error while trying to get request token from Yahoo. The error says Im missing oauth_callback parameter and yes I miss it because I dont need it. Ive read I need to set it to "oob" value if I dont want to use it(desktop app). And I did that but to no avail. If I set it to null the same happens. Im using OAuth for java: http://oauth.googlecode.com/svn/code/java/core/ OAuthServiceProvider serviceProvider = new OAuthServiceProvider("https://api.login.yahoo.com/oauth/v2/get_request_token", "https://api.login.yahoo.com/oauth/v2/request_auth", "https://api.login.yahoo.com/oauth/v2/get_token"); OAuthConsumer consumer = new OAuthConsumer("oob", consumerKey, consumerSecret, serviceProvider); OAuthAccessor accessor = new OAuthAccessor(consumer); OAuthClient client = new OAuthClient(new HttpClient4()); OAuthMessage response = client.getRequestTokenResponse(accessor, OAuthMessage.POST, null); System.out.println(response.getBodyAsStream());

  Read the article

• How to allow multiple inputs from user using R?

  - by Juan

  For example, if I need that the user specifies the number of rows and columns of a matrix: PROMPT: Number of rows?: USER INPUT: [a number] I need that R 'waits' for the input. Then save [a number] into a variable v1. Next, PROMPT: Number of columns?: USER INPUT: [another number] Also save [another number] into a variable v2. At the end, I will have two variables (v1, v2) that will be used in the rest of the code. "readline" only works for one input at a time. I can't run the two lines together v1 <- readline("Number of rows?: ") v2 <- readline("Number of columns?: ") Any ideas or suggestions? Thank you in advance

  Read the article

• xsd:datetime and XmlGregorianCalendar causes NullPointerException

  - by Draemon

  The following works: public Date getDate() { return date; } and produces something like: <date>2010-03-23T17:43:50.879Z</date> And I can use an XmlGregorianCalendar to return xsd:date or xsd:time types fine: @XmlSchemaType(name="date") public XmlGregorianCalendar getDate() { return date; } which produces something like: <date>2010-03-23</date> But trying to return xsd:datetime like so: @XmlSchemaType(name="datetime") public XmlGregorianCalendar getDate() { return date; } Causes this stack trace: java.lang.NullPointerException at com.sun.xml.bind.v2.model.impl.RuntimeBuiltinLeafInfoImpl.checkXmlGregorianCalendarFieldRef(RuntimeBuiltinLeafInfoImpl.java:864) at com.sun.xml.bind.v2.model.impl.RuntimeBuiltinLeafInfoImpl.access$200(RuntimeBuiltinLeafInfoImpl.java:111) at com.sun.xml.bind.v2.model.impl.RuntimeBuiltinLeafInfoImpl$13.print(RuntimeBuiltinLeafInfoImpl.java:536) ...snip... at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) at java.lang.Thread.run(Thread.java:619) Which doesn't mention my code at all. I'm using tomcat 6.0.24, java 1.6.0_16-b01

  Read the article

• Compilation error on a user control

  - by MikeP

  I'm stumped! We have a user control for managing account information. We use this particular control on two pages. On one page, everything works perfectly and meets our expectation. On the second page however we receive compilation errors stating that: "C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\lrpcentral\0e987bea\6719c8b6\App_Web_PageThatFails.aspx.f3d462c1.oi52bvii.0.cs(172): error CS0433: The type 'xxxx_ascx' exists in both 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\APPLICATIONNAME\0e987bea\6719c8b6\App_Web_xxxx.ascx.cdcab7d2.xbnvt2za.dll' and 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\APPLICATIONNAME\0e987bea\6719c8b6\App_Web_eix7xllr.dll' My problem is similar to Cyril's but the "delete everything from Temp" is not an option for me, and Cyril's solution does not apply since the only variable we have is contained in the designer file, which is not deployed to our production environment (we pre-compile). After reading David's answer (here) I examined my directories for circular dependency and was unable to find any. Structure: Top Level Page that works Control Directory A Page that causes the error

  Read the article

• VB.NET - using textfile as source for menus and textboxes

  - by Kenny Bones

  Hi, this is probably a bit tense and I'm not sure if this is possible at all. But basically, I'm trying to create a small application which contains alot of PowerShell-code which I want to run in an easy matter. I've managed to create everything myself and it does work. But all of the PowerShell code is manually hardcoded and this gives me a huge disadvantage. What I was thinking was creating some sort of dynamic structure where I can read a couple of text files (possible a numerous amount of text files) and use these as the source for both the comboboxes and the richtextbox which provovides as the string used to run in PowerShell. I was thinking something like this: Combobox - "Choose cmdlet" - Use "menucode.txt" as source Richtextbox - Use "code.txt" as source But, the thing is, Powershell snippets need a few arguments in order for them to work. So I've got a couple of comboboxes and a few textboxes which provides as input for these arguments. And this is done manually as it is right now. So rewriting this small application should also search the textfile for some keywords and have the comboboxes and textboxes to replace those keywords. And I'm not sure how to do this. So, would this requre a whole lot of textfiles? Or could I use one textfile and separate each PowerShell cmdlet snippets with something? Like some sort of a header? Right now, I've got this code at the eventhandler (ComboBox_SelectedIndexChanged) If ComboBoxFunksjon.Text = "Set attribute" Then TxtBoxUsername.Visible = True End If If chkBoxTextfile.Checked = True Then If txtboxBrowse.Text = "" Then MsgBox("You haven't choses a textfile as input for usernames") End If LabelAttribute.Visible = True LabelUsername.Visible = False ComboBoxAttribute.Visible = True TxtBoxUsername.Visible = False txtBoxCode.Text = "$users = Get-Content " & txtboxBrowse.Text & vbCrLf & "foreach ($a in $users)" & vbCrLf & "{" & vbCrLf & "Set-QADUser -Identity $a -ObjectAttributes @{" & ComboBoxAttribute.SelectedItem & "='" & TxtBoxValue.Text & "'}" & vbCrLf & "}" If ComboBoxAttribute.SelectedItem = "Outlook WebAccess" Then TxtBoxValue.Visible = False CheckBoxValue.Visible = True CheckBoxValue.Text = "OWA Enabled?" txtBoxCode.Text = "$users = Get-Content " & txtboxBrowse.Text & vbCrLf & "foreach ($a in $users)" & vbCrLf & "{" & vbCrLf & "Set-CASMailbox -Identity $a -OWAEnabled" & " " & "$" & CheckBoxValue.Checked & " '}" & vbCrLf & "}" End If If ComboBoxAttribute.SelectedItem = "MobileSync" Then TxtBoxValue.Visible = False CheckBoxValue.Visible = True CheckBoxValue.Text = "MobileSync Enabled?" Dim value If CheckBoxValue.Checked = True Then value = "0" Else value = "7" End If txtBoxCode.Text = "$users = Get-Content " & txtboxBrowse.Text & vbCrLf & "foreach ($a in $users)" & vbCrLf & "{" & vbCrLf & "Set-QADUser -Identity $a -ObjectAttributes @{msExchOmaAdminWirelessEnable='" & value & " '}" & vbCrLf & "}" End If Else LabelAttribute.Visible = True LabelUsername.Visible = True ComboBoxAttribute.Visible = True txtBoxCode.Text = "Set-QADUser -Identity " & TxtBoxUsername.Text & " -ObjectAttributes @{" & ComboBoxAttribute.SelectedItem & "='" & TxtBoxValue.Text & " '}" If ComboBoxAttribute.SelectedItem = "Outlook WebAccess" Then TxtBoxValue.Visible = False CheckBoxValue.Visible = True CheckBoxValue.Text = "OWA Enabled?" txtBoxCode.Text = "Set-CASMailbox " & TxtBoxUsername.Text & " -OWAEnabled " & "$" & CheckBoxValue.Checked End If If ComboBoxAttribute.SelectedItem = "MobileSync" Then TxtBoxValue.Visible = False CheckBoxValue.Visible = True CheckBoxValue.Text = "MobileSync Enabled?" Dim value If CheckBoxValue.Checked = True Then value = "0" Else value = "7" End If txtBoxCode.Text = "Set-QADUser " & TxtBoxUsername.Text & " -ObjectAttributes @{msExchOmaAdminWirelessEnable='" & value & "'}" End If End If Now, this snippet above lets me either use a text file as a source for each username used in the powershell snippet. Just so you know :) And I know, this is probably coded as stupidly as it gets. But it does work! :)

  Read the article

• Error after switching from .NET 3.5 to 4

  - by Queops

  Application.Run(new Main()); This line gives TypeInitializationException was unhandled after I switched from 3.5 to 4 framework. Why is this? Edit: Forgot to mention this is a Winforms C# application. Okay so I have SQLite .NET referenced. I tried this on a project created on .NET 4 by default and didn't give me any error so I assumed it wasn't about SQLite .NET http://sqlite.phxsoftware.com/ Please note v2.0.50727 this is the runtime version of the DLL which seems to be causing the problem. Thrown: "A assemblagem de modo misto foi criada com base na versão 'v2.0.50727' do tempo de execução e não é possível carregá-la no tempo de execução 4.0 sem informações de configuração adicionais." (System.IO.FileLoadException) Exception Message = "A assemblagem de modo misto foi criada com base na versão 'v2.0.50727' do tempo de execução e não é possível carregá-la no tempo de execução 4.0 sem informações de configuração adicionais.", Exception Type = "System.IO.FileLoadException" Seems he can't run the DLL on v4 with/ extra configuration.

  Read the article

• Get nul value from one ViewController to one ViewController

  - by sovannarith

  I have 2 ViewControllers namely V1 and V2. I want to pass value from V2 to V1 but I get value 0 for countV1 in V1. I saw more questions in stackoverflow but I can't deal with this small problem. I use ARC. In V1 .h file @property(nonatomic,unsafe_unretained) int countV1; .m file @synthesize countV1; In V2 .m file int countV2 = 1; V1 *v1 = [V1 alloc] initWithNibName:@"V1" bundle:nil]; v1.countV1 = countV2;

  Read the article

• How can I make this statement readable?

  - by bstullkid

  I'm having trouble coming up with a way to make this readable, any thoughts on how I should peice this together? Should I get rid of the one liner and use some ifs? result = ( strtod( strlen(v1->score) > 0 ? strtod(v1->score, (char **)NULL) < 0.1 ? "0.1" : v1->score : "0.0", (char**)NULL) > strtod( strlen(v2->score) > 0 ? strtod(v2->score, (char **)NULL) < 0.1 ? "0.1" : v2->score : "0.0", (char**)NULL)) ? -1 : 1;

  Read the article

• Nested for_each with lambda not possible?

  - by Ela782

  The following code does not compile in VS2012, it gives error C2064: term does not evaluate to a function taking 1 arguments on the line of the second for_each (line 4 below). vector<string> v1; for_each(begin(v1), end(v1), [](string s1) { vector<string> v2; for_each(begin(v2), end(v2), [](string s2) { cout << "..."; }); }); I found some related stuff like http://connect.microsoft.com/VisualStudio/feedback/details/560907/capturing-variables-in-nested-lambdas which shows a bug (they are doing something different) but on the other hand that shows that what I print above should be possible. What's wrong with the above code?

  Read the article

• Issues with HLSL and lighting

  - by numerical25

  I am trying figure out whats going on with my HLSL code but I have no way of debugging it cause C++ gives off no errors. The application just closes when I run it. I am trying to add lighting to a 3d plane I made. below is my HLSL. The problem consist when my Pixel shader method returns the struct "outColor" . If I change the return value back to the struct "psInput" , everything goes back to working again. My light vectors and colors are at the top of the fx file // PS_INPUT - input variables to the pixel shader // This struct is created and fill in by the // vertex shader cbuffer Variables { matrix Projection; matrix World; float TimeStep; }; struct PS_INPUT { float4 Pos : SV_POSITION; float4 Color : COLOR0; float3 Normal : TEXCOORD0; float3 ViewVector : TEXCOORD1; }; float specpower = 80.0f; float3 camPos = float3(0.0f, 9.0, -256.0f); float3 DirectLightColor = float3(1.0f, 1.0f, 1.0f); float3 DirectLightVector = float3(0.0f, 0.602f, 0.70f); float3 AmbientLightColor = float3(1.0f, 1.0f, 1.0f); /*************************************** * Lighting functions ***************************************/ /********************************* * CalculateAmbient - * inputs - * vKa material's reflective color * lightColor - the ambient color of the lightsource * output - ambient color *********************************/ float3 CalculateAmbient(float3 vKa, float3 lightColor) { float3 vAmbient = vKa * lightColor; return vAmbient; } /********************************* * CalculateDiffuse - * inputs - * material color * The color of the direct light * the local normal * the vector of the direct light * output - difuse color *********************************/ float3 CalculateDiffuse(float3 baseColor, float3 lightColor, float3 normal, float3 lightVector) { float3 vDiffuse = baseColor * lightColor * saturate(dot(normal, lightVector)); return vDiffuse; } /********************************* * CalculateSpecular - * inputs - * viewVector * the direct light vector * the normal * output - specular highlight *********************************/ float CalculateSpecular(float3 viewVector, float3 lightVector, float3 normal) { float3 vReflect = reflect(lightVector, normal); float fSpecular = saturate(dot(vReflect, viewVector)); fSpecular = pow(fSpecular, specpower); return fSpecular; } /********************************* * LightingCombine - * inputs - * ambient component * diffuse component * specualr component * output - phong color color *********************************/ float3 LightingCombine(float3 vAmbient, float3 vDiffuse, float fSpecular) { float3 vCombined = vAmbient + vDiffuse + fSpecular.xxx; return vCombined; } //////////////////////////////////////////////// // Vertex Shader - Main Function /////////////////////////////////////////////// PS_INPUT VS(float4 Pos : POSITION, float4 Color : COLOR, float3 Normal : NORMAL) { PS_INPUT psInput; float4 newPosition; newPosition = Pos; newPosition.y = sin((newPosition.x * TimeStep) + (newPosition.z / 3.0f)) * 5.0f; // Pass through both the position and the color psInput.Pos = mul(newPosition , Projection ); psInput.Color = Color; psInput.ViewVector = normalize(camPos - psInput.Pos); return psInput; } /////////////////////////////////////////////// // Pixel Shader /////////////////////////////////////////////// //Anthony!!!!!!!!!!! Find out how color works when multiplying them float4 PS(PS_INPUT psInput) : SV_Target { float3 normal = -normalize(psInput.Normal); float3 vAmbient = CalculateAmbient(psInput.Color, AmbientLightColor); float3 vDiffuse = CalculateDiffuse(psInput.Color, DirectLightColor, normal, DirectLightVector); float fSpecular = CalculateSpecular(psInput.ViewVector, DirectLightVector, normal); float4 outColor; outColor.rgb = LightingCombine(vAmbient, vDiffuse, fSpecular); outColor.a = 1.0f; //Below is where the error begins return outColor; } // Define the technique technique10 Render { pass P0 { SetVertexShader( CompileShader( vs_4_0, VS() ) ); SetGeometryShader( NULL ); SetPixelShader( CompileShader( ps_4_0, PS() ) ); } } Below is some of my c++ code. Reason I am showing this is because it is pretty much what creates the surface normals for my shaders to evaluate. for the lighting for(int z=0; z < NUM_ROWS; ++z) { for(int x = 0; x < NUM_COLS; ++x) { int curVertex = x + (z * NUM_VERTSX); indices[curIndex] = curVertex; indices[curIndex + 1] = curVertex + NUM_VERTSX; indices[curIndex + 2] = curVertex + 1; D3DXVECTOR3 v0 = vertices[indices[curIndex]].pos; D3DXVECTOR3 v1 = vertices[indices[curIndex + 1]].pos; D3DXVECTOR3 v2 = vertices[indices[curIndex + 2]].pos; D3DXVECTOR3 normal; D3DXVECTOR3 cross; D3DXVec3Cross(&cross, &D3DXVECTOR3(v2 - v0),&D3DXVECTOR3(v1 - v0)); D3DXVec3Normalize(&normal, &cross); vertices[indices[curIndex]].normal = normal; vertices[indices[curIndex + 1]].normal = normal; vertices[indices[curIndex + 2]].normal = normal; indices[curIndex + 3] = curVertex + 1; indices[curIndex + 4] = curVertex + NUM_VERTSX; indices[curIndex + 5] = curVertex + NUM_VERTSX + 1; v0 = vertices[indices[curIndex + 3]].pos; v1 = vertices[indices[curIndex + 4]].pos; v2 = vertices[indices[curIndex + 5]].pos; D3DXVec3Cross(&cross, &D3DXVECTOR3(v2 - v0),&D3DXVECTOR3(v1 - v0)); D3DXVec3Normalize(&normal, &cross); vertices[indices[curIndex + 3]].normal = normal; vertices[indices[curIndex + 4]].normal = normal; vertices[indices[curIndex + 5]].normal = normal; curIndex += 6; } } and below is my c++ code, in it's entirety. showing the drawing and also calling on the passes #include "MyGame.h" //#include "CubeVector.h" /* This code sets a projection and shows a turning cube. What has been added is the project, rotation and a rasterizer to change the rasterization of the cube. The issue that was going on was something with the effect file which was causing the vertices not to be rendered correctly.*/ typedef struct { ID3D10Effect* pEffect; ID3D10EffectTechnique* pTechnique; //vertex information ID3D10Buffer* pVertexBuffer; ID3D10Buffer* pIndicesBuffer; ID3D10InputLayout* pVertexLayout; UINT numVertices; UINT numIndices; }ModelObject; ModelObject modelObject; // World Matrix D3DXMATRIX WorldMatrix; // View Matrix D3DXMATRIX ViewMatrix; // Projection Matrix D3DXMATRIX ProjectionMatrix; ID3D10EffectMatrixVariable* pProjectionMatrixVariable = NULL; //grid information #define NUM_COLS 16 #define NUM_ROWS 16 #define CELL_WIDTH 32 #define CELL_HEIGHT 32 #define NUM_VERTSX (NUM_COLS + 1) #define NUM_VERTSY (NUM_ROWS + 1) // timer variables LARGE_INTEGER timeStart; LARGE_INTEGER timeEnd; LARGE_INTEGER timerFreq; double currentTime; float anim_rate; // Variable to hold how long since last frame change float lastElaspedFrame = 0; // How long should the frames last float frameDuration = 0.5; bool MyGame::InitDirect3D() { if(!DX3dApp::InitDirect3D()) { return false; } // Get the timer frequency QueryPerformanceFrequency(&timerFreq); float freqSeconds = 1.0f / timerFreq.QuadPart; lastElaspedFrame = 0; D3D10_RASTERIZER_DESC rastDesc; rastDesc.FillMode = D3D10_FILL_WIREFRAME; rastDesc.CullMode = D3D10_CULL_FRONT; rastDesc.FrontCounterClockwise = true; rastDesc.DepthBias = false; rastDesc.DepthBiasClamp = 0; rastDesc.SlopeScaledDepthBias = 0; rastDesc.DepthClipEnable = false; rastDesc.ScissorEnable = false; rastDesc.MultisampleEnable = false; rastDesc.AntialiasedLineEnable = false; ID3D10RasterizerState *g_pRasterizerState; mpD3DDevice->CreateRasterizerState(&rastDesc, &g_pRasterizerState); mpD3DDevice->RSSetState(g_pRasterizerState); // Set up the World Matrix D3DXMatrixIdentity(&WorldMatrix); D3DXMatrixLookAtLH(&ViewMatrix, new D3DXVECTOR3(200.0f, 60.0f, -20.0f), new D3DXVECTOR3(200.0f, 50.0f, 0.0f), new D3DXVECTOR3(0.0f, 1.0f, 0.0f)); // Set up the projection matrix D3DXMatrixPerspectiveFovLH(&ProjectionMatrix, (float)D3DX_PI * 0.5f, (float)mWidth/(float)mHeight, 0.1f, 100.0f); pTimeVariable = NULL; if(!CreateObject()) { return false; } return true; } //These are actions that take place after the clearing of the buffer and before the present void MyGame::GameDraw() { static float rotationAngle = 0.0f; // create the rotation matrix using the rotation angle D3DXMatrixRotationY(&WorldMatrix, rotationAngle); rotationAngle += (float)D3DX_PI * 0.0f; // Set the input layout mpD3DDevice->IASetInputLayout(modelObject.pVertexLayout); // Set vertex buffer UINT stride = sizeof(VertexPos); UINT offset = 0; mpD3DDevice->IASetVertexBuffers(0, 1, &modelObject.pVertexBuffer, &stride, &offset); mpD3DDevice->IASetIndexBuffer(modelObject.pIndicesBuffer, DXGI_FORMAT_R32_UINT, 0); pTimeVariable->SetFloat((float)currentTime); // Set primitive topology mpD3DDevice->IASetPrimitiveTopology(D3D10_PRIMITIVE_TOPOLOGY_TRIANGLELIST); // Combine and send the final matrix to the shader D3DXMATRIX finalMatrix = (WorldMatrix * ViewMatrix * ProjectionMatrix); pProjectionMatrixVariable->SetMatrix((float*)&finalMatrix); // make sure modelObject is valid // Render a model object D3D10_TECHNIQUE_DESC techniqueDescription; modelObject.pTechnique->GetDesc(&techniqueDescription); // Loop through the technique passes for(UINT p=0; p < techniqueDescription.Passes; ++p) { modelObject.pTechnique->GetPassByIndex(p)->Apply(0); // draw the cube using all 36 vertices and 12 triangles mpD3DDevice->DrawIndexed(modelObject.numIndices,0,0); } } //Render actually incapsulates Gamedraw, so you can call data before you actually clear the buffer or after you //present data void MyGame::Render() { // Get the start timer count QueryPerformanceCounter(&timeStart); currentTime += anim_rate; DX3dApp::Render(); QueryPerformanceCounter(&timeEnd); anim_rate = ( (float)timeEnd.QuadPart - (float)timeStart.QuadPart ) / timerFreq.QuadPart; } bool MyGame::CreateObject() { VertexPos vertices[NUM_VERTSX * NUM_VERTSY]; for(int z=0; z < NUM_VERTSY; ++z) { for(int x = 0; x < NUM_VERTSX; ++x) { vertices[x + z * NUM_VERTSX].pos.x = (float)x * CELL_WIDTH; vertices[x + z * NUM_VERTSX].pos.z = (float)z * CELL_HEIGHT; vertices[x + z * NUM_VERTSX].pos.y = (float)(rand() % CELL_HEIGHT); vertices[x + z * NUM_VERTSX].color = D3DXVECTOR4(1.0, 0.0f, 0.0f, 0.0f); } } DWORD indices[NUM_VERTSX * NUM_VERTSY * 6]; int curIndex = 0; for(int z=0; z < NUM_ROWS; ++z) { for(int x = 0; x < NUM_COLS; ++x) { int curVertex = x + (z * NUM_VERTSX); indices[curIndex] = curVertex; indices[curIndex + 1] = curVertex + NUM_VERTSX; indices[curIndex + 2] = curVertex + 1; D3DXVECTOR3 v0 = vertices[indices[curIndex]].pos; D3DXVECTOR3 v1 = vertices[indices[curIndex + 1]].pos; D3DXVECTOR3 v2 = vertices[indices[curIndex + 2]].pos; D3DXVECTOR3 normal; D3DXVECTOR3 cross; D3DXVec3Cross(&cross, &D3DXVECTOR3(v2 - v0),&D3DXVECTOR3(v1 - v0)); D3DXVec3Normalize(&normal, &cross); vertices[indices[curIndex]].normal = normal; vertices[indices[curIndex + 1]].normal = normal; vertices[indices[curIndex + 2]].normal = normal; indices[curIndex + 3] = curVertex + 1; indices[curIndex + 4] = curVertex + NUM_VERTSX; indices[curIndex + 5] = curVertex + NUM_VERTSX + 1; v0 = vertices[indices[curIndex + 3]].pos; v1 = vertices[indices[curIndex + 4]].pos; v2 = vertices[indices[curIndex + 5]].pos; D3DXVec3Cross(&cross, &D3DXVECTOR3(v2 - v0),&D3DXVECTOR3(v1 - v0)); D3DXVec3Normalize(&normal, &cross); vertices[indices[curIndex + 3]].normal = normal; vertices[indices[curIndex + 4]].normal = normal; vertices[indices[curIndex + 5]].normal = normal; curIndex += 6; } } //Create Layout D3D10_INPUT_ELEMENT_DESC layout[] = { {"POSITION",0,DXGI_FORMAT_R32G32B32_FLOAT, 0 , 0, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"COLOR",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 12, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"NORMAL",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 28, D3D10_INPUT_PER_VERTEX_DATA, 0} }; UINT numElements = (sizeof(layout)/sizeof(layout[0])); modelObject.numVertices = sizeof(vertices)/sizeof(VertexPos); //Create buffer desc D3D10_BUFFER_DESC bufferDesc; bufferDesc.Usage = D3D10_USAGE_DEFAULT; bufferDesc.ByteWidth = sizeof(VertexPos) * modelObject.numVertices; bufferDesc.BindFlags = D3D10_BIND_VERTEX_BUFFER; bufferDesc.CPUAccessFlags = 0; bufferDesc.MiscFlags = 0; D3D10_SUBRESOURCE_DATA initData; initData.pSysMem = vertices; //Create the buffer HRESULT hr = mpD3DDevice->CreateBuffer(&bufferDesc, &initData, &modelObject.pVertexBuffer); if(FAILED(hr)) return false; modelObject.numIndices = sizeof(indices)/sizeof(DWORD); bufferDesc.ByteWidth = sizeof(DWORD) * modelObject.numIndices; bufferDesc.BindFlags = D3D10_BIND_INDEX_BUFFER; initData.pSysMem = indices; hr = mpD3DDevice->CreateBuffer(&bufferDesc, &initData, &modelObject.pIndicesBuffer); if(FAILED(hr)) return false; ///////////////////////////////////////////////////////////////////////////// //Set up fx files LPCWSTR effectFilename = L"effect.fx"; modelObject.pEffect = NULL; hr = D3DX10CreateEffectFromFile(effectFilename, NULL, NULL, "fx_4_0", D3D10_SHADER_ENABLE_STRICTNESS, 0, mpD3DDevice, NULL, NULL, &modelObject.pEffect, NULL, NULL); if(FAILED(hr)) return false; pProjectionMatrixVariable = modelObject.pEffect->GetVariableByName("Projection")->AsMatrix(); pTimeVariable = modelObject.pEffect->GetVariableByName("TimeStep")->AsScalar(); //Dont sweat the technique. Get it! LPCSTR effectTechniqueName = "Render"; modelObject.pTechnique = modelObject.pEffect->GetTechniqueByName(effectTechniqueName); if(modelObject.pTechnique == NULL) return false; //Create Vertex layout D3D10_PASS_DESC passDesc; modelObject.pTechnique->GetPassByIndex(0)->GetDesc(&passDesc); hr = mpD3DDevice->CreateInputLayout(layout, numElements, passDesc.pIAInputSignature, passDesc.IAInputSignatureSize, &modelObject.pVertexLayout); if(FAILED(hr)) return false; return true; }

  Read the article

• CodePlex Daily Summary for Tuesday, March 09, 2010

  CodePlex Daily Summary for Tuesday, March 09, 2010New Projects.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: .NET Excel Wrapper encapsulates the complexity of working with multiple Excel objects giving you one central point to do all your processing. It h...Advancement Voyage: Advancement Voyage is a high quality RPG experience that provides all the advancement and voyaging that a player could hope for.ASP.Net Routing configuration: ASP.NET routing configuration enables you to configure the routes in the web.config bbinjest: bbinjestBuildUp: BuildUp is a build number increment tool for C# .net projects. It is run as a post build step in Visual Studio.Controlled Vocabulary: This project is devoted to creating tools to assist with Controlling Vocabulary in communication. The initial delivery is an Outlook 2010 Add-in w...CycleList: A replacement for the WPF ListBox Control. Displays only a single item and allows the user to change the selected item by clicking on it once. Very...Forensic Suite: A suite of security softwareFREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat is a live chat solution and its DotNetNuke Chat Module helps to embed a live chat room into website with DotNetNuke(DNN) integrated ...HouseFly experimental controls: Experimental controls for use in HouseFly.ICatalogAll: junkMidiStylus: MidiStylus allows you to control MIDI-enabled hardware or software using your pressure-sensitive pen tablet. The program maps the X position, Y po...myTunes: Search for your favorite artistsNColony - Pluggable Socialism?: NColony will maximize the use of MEF to create flexible application architectures through a suite of plug-in solutions. If MEF is an outlet for plu...Network Monitor Decryption Expert: NmDecrypt is a Network Monitor Expert which when given a trace with encrypted frames, a security certificate, and a passkey will create a new trace...occulo: occulo is a free steganography program, meant to embed files within images with optional encrytion. Open Ant: A implementation of a Open Source Ant which is created to show what is possible in the serious game AntMe! The First implementation of that ProjectProgramming Patterns by example: Design patterns provide solutions to common software design problems. This project will contain samples, written in c# and ruby, of each design pat...project4k: Developing bulk mail system storing email informationQuail - Selenium Remote Control Made Easy: Quail makes it easy for Quality Assurance departments write automated tests against web applications. Both HTML and Silverlight applications can b...RedBulb for XNA Framework: RedBulb is a collection of utility functions and classes that make writing games with XNA a lot easier. Key features: Console,GUI (Labels, Buttons,...RegExpress: RegExpress is a WPF application that combines interactive demos of regular expressions with slide content. This was designed for a user group prese...RemoveFolder: Small utility program to remove empty foldersScrumTFS: ScrumTFSSharePoint - Open internal link in new window list definition: A simple SharePoint list definition to render SharePoint internal links with the option to open them in a new window.SqlSiteMap4MVC: SqlSiteMapProvider for ASP.Net MVC.T Sina .NET Client: t.sina.com.cn api 新浪微博APITest-Lint-Extensions: Test Lint is a free Typemock VS 2010 Extension that finds common problems in your unit tests as you type them. this project will host extensions ...ThinkGearNET: ThinkGearNET is a library for easy usage of the Neurosky Mindset headset from .NET .Wiki to Maml: This project enables you to write wiki syntax and have it converted into MAML syntax for Sandcastle documentation projects.WPF Undo/Redo Framework: This project attempts to solve the age-old programmer problem of supporting unlimited undo/redo in an application, in an easily reusable manner. Th...WPFValidators: WPF Validators Validações de campos para WPFWSP Listener: The WSP listener is a windows service application which waits for new WSC and WSP files in a specific folder. If a new WSC and WSP file are added, ...New Releases.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: First Release: This is the first release which includes the main library release..NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: Updated Version: New Features:SetRangeValue using multidimensional array Print current worksheet Print all worksheets Format ranges background, color, alig...ArkSwitch: ArkSwitch v1.1.2: This release removes all memory reporting information, and is focused on stability.BattLineSvc: V2.1: - Fixed a bug where on system start-up, it would pop up a notification box to let you know the service started. Annoying! And fixed! - Fixed the ...BuildUp: BuildUp 1.0 Alpha 1: Use at your own risk!Not yet feature complete. Basic build incrementing and attribute overriding works. Still working on cascading build incremen...Controlled Vocabulary: 1.0.0.1: Initial Alpha Release. System Requirements Outlook 2010 .Net Framework 3.5 Installation 1. Close Outlook (Use Task Manager to ensure no running i...CycleList: CycleList: The binaries contain the .NET 3.5 DLL ONLY. Please download source for usage examples.FluentNHibernate.Search: 0.3 Beta: 0.3 Beta take the following changes : Mappings : - Field Mapping without specifying "Name" - Id Mapping without specifiying "Field" - Builtin Anal...FREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat DNN Chat Module: With FREE DotNetNuke Chat Module of 123 Flash Chat, webmaster will be assist to add a chat room into DotNetNuke instantly and help to attract more ...GameStore League Manager: League Manager 1.0 release 3: This release includes a full installer so that you can get your league running faster and generate interest quicker.iExporter - iTunes playlist exporting: iExporter gui v2.3.1.0 - console v1.2.1.0: Paypal donate! Solved a big bug for iExporter ( Gui & Console ) When a track isn't located under the main iTunes library, iExporter would crash! ...jQuery.cssLess: jQuery.cssLess 0.3: New - Removed the dependency from XRegExp - Added comment support (both CSS style and C style) - Optimised it for speed - Added speed test TOD...jQuery.cssLess: jQuery.cssLess 0.4: NEW - @import directive - preserving of comments in the resulting CSS - code refactoring - more class oriented approach TODO - implement operation...MapWindow GIS: MapWindow 6.0 msi (March 8): Rewrote the shapefile saving code in the indexed case so that it uses the shape indices rather than trying to create features. This should allow s...MidiStylus: MidiStylus 0.5.1: MidiStylus Beta 0.5.1 This release contains basic functionality for transmitting MIDI data based on X position, Y position, and pressure value rea...MiniTwitter: 1.09.1: MiniTwitter 1.09.1 更新内容 修正 URL に & が含まれている時に短縮 URL がおかしくなるバグを修正Mosaictor: first executable: .exe file of the app in its current state. Mind you that this will likely be highly unstable due to heaps of uncaught errors.MvcContrib a Codeplex Foundation project: T4MVC: T4MVC is a T4 template that generates strongly typed helpers for ASP.NET MVC. You can download it below, and check out the documention here.N2 CMS: 2.0 beta: Major Changes ASP.NET MVC 2 templates Refreshed management UI LINQ support Performance improvements Auto image resize Upgrade Make a comp...NotesForGallery: ASP.NET AJAX Photo Gallery Control: NotesForGallery 2.0: PresentationNotesForGallery is an open source control on top of the Microsoft ASP.NET AJAX framework for easy displaying image galleries in the as...occulo: occulo 0.1 binaries: Windows binaries. Tested on Windows XP SP2.occulo: occulo 0.1 source: Initial source release.Open NFe: DANFE 1.9.5: Ajuste de layout e correção dos campos de ISS.patterns & practices Web Client Developer Guidance: Web Application Guidance -- March 8th Drop: This iteration we focused on documentation and bug fixes.PoshConsole: PoshConsole 2.0 Beta: With this release, I am refocusing PoshConsole... It will be a PowerShell 2 host, without support for PowerShell 1.0 I have used some of the new P...Quick Performance Monitor: QPerfmon 1.1: Now you can specify different updating frequencies.RedBulb for XNA Framework: Cipher Puzzle (Sample) Creators Club Package: RedBulb Sample Game: Cipher Puzzle http://bayimg.com/image/galgfaacb.jpgRedBulb for XNA Framework: RedBulbStarter (Base Code): This is the code you need to start with. Quick Start Guide: Download the latest version of RedBulb: http://redbulb.codeplex.com/releases/view/415...RoTwee: RoTwee 7.0.0.0 (Alpha): Now this version is under improvement of code structure and may be buggy. However movement of rotation is quite good in this version thanks to clea...SCSI Interface for Multimedia and Block Devices: Release 9 - Improvements and Bug Fixes: Changes I have made in this version: Fixed INQUIRY command timeout problem Lowered ISOBurn's memory usage significantly by not explicitly setting...SharePoint - Open internal link in new window list definition: Open link in new window list definition: First release, with english and italian localization supportSharePoint Outlook Connector: Version 1.2.3.2: Few bug fixing and some ui enhancementsSysI: sysi, release build: Better than ever -- now allows for escalation to adminThe Silverlight Hyper Video Player [http://slhvp.com]: Beta 1: Beta (1.1) The code is ready for intensive testing. I will update the code at least every second day until we are ready to freeze for V1, which wi...Truecrafting: Truecrafting 0.52: fixed several trinkets that broke just before i released 0.51, sorry fixed water elemental not doing anything while summoned if not using glyph o...Truecrafting: Truecrafting 0.53: fixed mp5 calculations when gear contained mp5 and made the formulas more efficient no need to rebuild profiles with this release if placed in th...umbracoSamplePackageCreator (beta): Working Beta: For Visual Studio 2008 creating packages for Umbraco 4.0.3.VCC: Latest build, v2.1.30307.0: Automatic drop of latest buildVCC: Latest build, v2.1.30308.0: Automatic drop of latest buildVOB2MKV: vob2mkv-1.0.3: This is a maintenance update of the VOB2MKV utility. The MKVMUX filter now describes the cluster locations using a separate SeekHead element at th...WPFValidators: WPFValidators 1.0 Beta: Primeira versão do componente ainda em Beta, pode ser utilizada em produção pois esta funcionando bem e as futuras alterações não sofreram muito im...WSDLGenerator: WSDLGenerator 0.0.06: - Added option to generate SharePoint compatible *disco.aspx file. - Changed commandline optionsWSP Listener: WSP Listener version 1.0.0.0: First version of the WSP Listener includes: Easy cop[y paste installation of WSP solutions Extended logging E-mail when installation is finish...Yet another pali text reader: Pali Text Reader App v1.1: new features/updates + search history is now a tab + format codes in dictionary + add/edit terms in the dictionary + pali keyboard inserts symbols...Most Popular ProjectsMetaSharpi4o - Indexed LINQResExBraintree Client LibraryGeek's LibrarySharepoint Feature ManagerConfiguration ManagementOragon Architecture SqlBuilderTerrain Independant Navigating Automaton v2.0WBFS ManagerMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web ServicesFasterflect - A Fast and Simple Reflection APIFarseer Physics Enginepatterns & practices – Enterprise LibraryTeam FTW - Software ProjectIonics Isapi Rewrite Filter

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >