Search Results

Search found 2130 results on 86 pages for 'swap'.

Page 54/86 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Grub2 attempting to boot hd1 when it should boot hd0

    - by JoBu1324
    I'm attempting to perform a "normal" install on a USB3 SSD (I don't know if it is noteworthy, but I don't have a swap partition). The installation proceeds normally (I'm installing from a USB2 device I created using LiLi Boot, with a copy of Ubuntu 12.10 64bit that I downloaded directly from the source. The system I'm running Ubuntu on has had a more traditional installation of ubuntu running on it without issue (also 12.10), so I know that everything works A-OK when booting from a 7200RPM internal disk. There are a number of oddities that I've noticed so far, including graphics corruption, but the first and most pressing issue is that Grub2 refuses to recognize the correct hd. From /boot/grub/grub.cfg: if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd1,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 else search --no-floppy --fs-uuid --set=root b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 fi font="/usr/share/grub/unicode.pf2" fi This is from a 100% fresh install of linux (first boot), which was installed while no hard drives were connected to the system, other than the USB2 LiLi drive. The system refuses to boot unless I change the hd1,msdos1 - hd0,msdos1 in the grub menu at boot, when it is the only disk device connected to the PC. What options are left for me to troubleshoot this issue? I've been racking my brains and taxing the internet trying to dig up something on this problem, but now I'd like to see if the Ubuntu community can rise to the challenge and help me fix this boot problem. This is the second time I've attempted this particular setup. The first time, after days of wasted time, I managed to get it to boot every other boot - i.e. every even boot it would boot into Ubuntu like it was happy; every odd boot it would boot into the BusyBox or Grub prompt. At one point it complained that it couldn't find /dev/disk/by-uuid/[the disk], which I found most perplexing, since the disk was there and booted before and after the occurrence (with intervention).

    Read the article

  • How to move ubuntu 12.04 on another drive

    - by Maksim
    How I can move my ubuntu on another drive? I know about clonezilla but problem is that destination drive is smaller the source one. Gparted can't copy-paste partition if destination not the end last partition. I tried dpkg --selected-packages and apt-clone. First one just not install all my packages and removed existed that now I have no full unity and not my all packages. Second one just fail on configuration package. But before I did that way I copy-paste my /etc to new system. My partition table destination : gpt 1 1049kB 106MB 105MB fat32 EFI System ??????????? 2 106MB 12,1GB 12,0GB ext4 3 12,1GB 66,3GB 54,2GB ext4 source: msdos 1 1049kB 12,0GB 12,0GB primary ext4 ??????????? 2 12,0GB 492GB 480GB primary ext4 3 492GB 500GB 8107MB primary linux-swap(v1) Gpt not working with ubuntu that use grub 1.99. I don't know why but my laptop can't boot any device with uefi just black screen and ubuntu detect it on fresh install.

    Read the article

  • "The volume filesystem root has only..."

    - by jcslzr
    I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

    Read the article

  • Dualboot Asus n56v (ubuntu / win 7 x64) - ubuntu doesn't detect partition table made by windows

    - by user76439
    I have an Asus n56v and I've got troubles installing Ubuntu 12.04 x64. I already have installed Windows 7 x64! The hard drive is: Hitachi HTS547575A9E384 My problem: The installation program doesn't recognize the already existing partitions and is offering only options where there are partitions. Can someone help me out? Is this an ACPI/IDE conflict, missing driver or conflict with Windows 7? (I'm not an expert on Linux, only working sometimes with it.) I now tried out some options concerning EFI with a GTP-table. Everything worked but I wasn't able to fix a dual boot (Windows boot loader) nor with GRUB2. The laptop is still having a BIOS, but is able to boot DVDs/CDs in EFI-mode. Now I try to avoid EFI and GTP using the old windows MBR style. I reinstalled Windows, so far no problem. When I want to try to install Ubuntu, it doesn't detect the already existing partition table. It is just showing me an empty space for the whole disk. Other threads like Ubuntu 12.04 does not see windows already install on my computer (dual installation) don't help me out. os-prober shows me a correct result. I don't know how to deal with gdisk as shown in Installer doesn't detect existing partition table/windows 7 partition. I have 750GB for the whole disk. I'm using: 90GB for Windows reserved partition + system partition, 500GB for data and the rest should be for SWAP and linux-system. How can I make Ubuntu detect the partition table?

    Read the article

  • Add an entry for Ubuntu on Windows 8 boot loader

    - by John
    I have installed Ubuntu 12.10 by creating free space in Windows 8 and then using that space to create 3 partitions, one for SWAP, one for GRUB (mounting point is /boot) and one for the actual OS. I did this so the Windows 8 boot loader wouldn't be overwritten in case I ever wanted to remove Ubuntu. I can still boot into Ubuntu if I select the boot loader from the BIOS. I want to add Ubuntu to the Windows 8 boot loader and I've been told to use EasyBCD. The issue with that is it doesn't actually direct Windows to the GRUB file, but rather to something like autogrub0.mri. I have found another programme called Visual BCD which will allow me to actually set the bootloader paths and drives. From here, I don't quite know what to do. I believe I have it set to the correct drive but I don't know if I'm directing to the right file. I think it's /boot/grub/x86_64-efi/grub.efi. I don't know if that's the right file, if I need to remove /boot or if the / need to be \ as that's what Windows uses. Sorry for such a lengthy post, please help!

    Read the article

  • SSD I/O extremely slow installing/booting Ubuntu 12.04

    - by Menda
    These are some useful specs: Macbook Pro 7,1 OWC Mercury Extreme Pro 2,5" SATA SSD (120 GB). Has SandForce driver. Ubuntu 12.04 Desktop 32 bits. One 18 GB partition for GNU/Linux and 1.5 GB for SWAP. MD5 for the Ubuntu install CD is OK. I tried to install Ubuntu. It seems that everything is recognized, but there's a big problem: read and writes to the SSD are extremely slow. For example, the install process, which shouldn't take more than 20 minutes, it takes 7 hours. Then, booting up the computer takes about 20 minutes. I checked and the problem is definitely the SSD. Every access to any file is like 10 times slower than normal. I have tried to format the partition as Ext4 and Ext3 with the same problem. Trying to install other distros like Fedora 17, I have a similar problem. There's a "lag" with the SSD, but not so accused as in Ubuntu. Surprisingly, Debian 6.0 installs and works without any problem. Mac OS works pretty good as well in the other partition, so I discard it's an SSD problem. Thanks for your help!

    Read the article

  • Win7 no longer available after installing 12.04

    - by Michael
    I have installed Ubuntu 12.04 but my Windows 7 partition seems to have been lost. It is in sda2. Can anyone help me how to get this Windows 7 partition back without having to reinstall Windows 7? Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd45cd45c Device Boot Start End Blocks Id System /dev/sda1 2048 61433855 30715904 83 Linux /dev/sda2 * 61433856 122873855 30720000 7 HPFS/NTFS/exFAT /dev/sda3 122873856 976769023 426947584 7 HPFS/NTFS/exFAT Disk /dev/sdb: 203.9 GB, 203928109056 bytes 255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x03ee03ee Device Boot Start End Blocks Id System /dev/sdb1 * 63 20482874 10241406 c W95 FAT32 (LBA) /dev/sdb2 20482875 40965749 10241437+ 1c Hidden W95 FAT32 (LBA) /dev/sdb3 40965750 398283479 178658865 f W95 Ext'd (LBA) /dev/sdb5 40965813 76694309 17864248+ 7 HPFS/NTFS/exFAT /dev/sdb6 76694373 108856439 16081033+ 7 HPFS/NTFS/exFAT /dev/sdb7 108856503 398283479 144713488+ 7 HPFS/NTFS/exFAT Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 240 heads, 63 sectors/track, 129201 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000001 Device Boot Start End Blocks Id System /dev/sdc1 * 63 20480543 10240240+ 82 Linux swap / Solaris /dev/sdc2 20480605 1953519119 966519257+ f W95 Ext'd (LBA) /dev/sdc5 20480607 1953519119 966519256+ 7 HPFS/NTFS/exFAT

    Read the article

  • Recover Lost data/partition

    - by Kaleido
    This is what happened: I was running 12.04.1 and wanted to install 12.10. upgrade, but a fresh install. When setting up my computer I anticipated for this by dividing my 640GB HD in following partitions: 1. 60 GB for Ubuntu, boot 2. 576 GB for data, mountpoint /home 3. swap, 4GB The idea was to manually select the correct partition in the installer but I got distracted for a moment and selected the wrong option. Result: The installer started repartitioning the entire HD. When I noticed this I interrupted the installer, but upon reboot it was clear that I was too late, no OS to boot to. I booted from a Gparted Live CD to see if I could recover the data on my previous /home-partition, but it's gone. Is there any way to recover the lost data? I searched around and read alot about Testdisk, but in all the tutorials I've seen, the set-up has been much easier than what I'm facing. I've not only lost my partition table, it's been replaced. Thanks in advance for any ideas that might help! If extra info is needed, please specify and I will do my best to provide.

    Read the article

  • .NET app - Should we use SQL Server and duplicate some reference data from an external Oracle DB? Or use Oracle and have a DB link?

    - by Daventry
    We're looking to migrate some existing Excel/Access processes into a new system which will provide the users with a Silverlight frontend to run and view the reports instead of using MS Access. The initial idea was to have SQL Server 2008 as RDBMS. The problem is that we've got some static data such as country codes, counterparties, etc which live in an existing Oracle DB. Since we do not want to duplicate that data (if possible), we were thinking of having a DB link between SQL Server and Oracle, but our firm does not allow that. So the options are either duplicate the data or use Oracle as RDBMS - surprise, the firm does allow DB links between Oracle databases. The initial idea was also to use WCF RIA Services, Entity Framework, etc which we're not sure they play well with Oracle, that's why it was decided to go with SQL Server in the first place. Would you advise to go for Oracle so that we can just link the static data? Or use SQL Server 2008 and replicate it because it's "safer" to stay within the Microsoft land? To use or not to use Entity Framework and WCF RIA Services at all? Regards. UPDATE: Thanks everyone for your answers. Nothing is set in stone yet. We'll try to import the data instead of linking, as if the other DB goes down, our system can still carry on. We're likely to use SQL Server just because most developers are more experienced with it. Even if we used RIA Services, we can swap out the Data Access Layer and use other frameworks such those mentioned below.

    Read the article

  • Are Windows partitions gone?

    - by Gigili
    I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

    Read the article

  • I installed ubuntu, the installer told me to reboot afterwards. I dd, and now linux wont boot

    - by mandy
    Im trying to dual boot between mac 10.6.8 and ubuntu 11.10. I have a macbook pro 8,1. So i installed from a 10.04 disk because the install window makes more sense to me, and it doesnt give me errors or anything. Also, any versions of ubuntu after that dont boot from disk for whatever reason. (i think its having to do with the efi boot thing. i have to get ubuntu 11.10 to boot from a usb with folders bootefiboot.iso) Then my plan after that was after the ubuntu 10.04 install took care of all the swap and stuff for me without being messy, to upgrade to 11.10. So here i have 10.04 booting successfully back and forth from mac osx no problem. I put in my 11.10 usb and the installer gives me the option to "update 10.04 to 11.10" bingo, jackpot, thats what i want. Everything proceeds as normal, as EVERY OTHER install of ubuntu i have ever done, then the installer finishes and says HEY! im finished! Continue testing or reboot now! So i reboot, and what do i get??? A black screen that says the file system isnt found, to enter a boot disk and press any key. WHAT THE HELL????? so i boot the 11.10 installer again from usb, and select "erase 11.10 and install 11.10", installer proceeds normally, and asks me to reboot. I reboot and get the SAME THING. Please, someone, help me get this right here. This is my first time actually dual booting between mac and linux. Usually i just wipe off osx completely and install ubuntu but i actually need to keep my mac partition this time. I have successfully installed 11.10 on this machine before, but that was when i did a clean install. Help?

    Read the article

  • SD Card only mounted after a reboot

    - by evothur
    Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

    Read the article

  • touch detection of non-rectangular sprites (cocos2d)

    - by hogni89
    What is the correct way to implement a non-rectangular sprite in Cocos2d? I am working on a jigsaw puzzle. And therefor do our sprites have some strange forms (Jigsaw puzzle bricks). As of now, we have implemented the "detect" this way: - (void)selectSpriteForTouch:(CGPoint)touchLocation { CCSprite * newSprite = nil; // Loop array of sprites for (CCSprite *sprite in movableSprites) { // Check if sprite is hit. // TODO: Swap if with something better. if (CGRectContainsPoint(sprite.boundingBox, touchLocation)) { newSprite = sprite; break; } } if (newSprite != selSprite) { // Move along, nothing to see here // Not the problem } } - (BOOL)ccTouchBegan:(UITouch *)touch withEvent:(UIEvent *)event { CGPoint touchLocation = [self convertTouchToNodeSpace:touch]; [self selectSpriteForTouch:touchLocation]; return TRUE; } I know that the problem is in the keyword "sprite.boundingBox". Is there a better way of implementing this, OR is it a limit when using sprites based on .png's? If so, how should I proceed? I'm new to iPhone and game development :D

    Read the article

  • Install Windows7 on drive with Ubuntu 12.04 already on. Is my plan good?

    - by John F
    I have Ubuntu 12.04 working fine, but need W7 occasionally. I just wanted to check that my plan for installing would work? Any help appreciated. Current partitions are: Partition....@ File System @ Mount Point @ Size.....@ Used.....@ Flags /dev/sda1....@ ext4........@ /ext4a......@ 37 GiB...@ 776 MiB..@ boot /dev/sda2....@ extended....@.............@ 122 GiB..@ -........@ ./dev/sda5...@ ext4........@ / ..........@ 37 GiB...@ 6 GiB....@ .unallocated @ unallocated @.............@ 7 GiB....@ - ...... @ ./dev/sda6 ..@ ext4........@ /home.......@ 77 GiB...@ 32 GiB...@ .unallocated @ unallocated @.............@ 65 GiB...@ - .......@ /dev/sda3...@ linux-swap..@.............@ 7 GiB....@ - .......@ My plan is to: - boot to ubuntu from USB ISO - change sda1 to NTFS - install W7 to sda1 - use the "Master Boot Record repair" utility to configure dual boot so I can see my original ubuntu installation as well as W7. Have I missed something? I'm concerned as to what the 776MB is that will be overwritten by the change to NTFS. It seems large for just the MBR? Would also appreciate it if anyone can explain what sda5 and 6 are being used for? Is sda5 Ubuntu and sda6 my data? Thanks in advance.

    Read the article

  • Fresh install of 64 bit 12.04 over 32 bit 11.10 alongside Windows 7

    - by Pareen
    I currently have Ubuntu 11.10 32 bit and Windows 7 dual boot in separate partitions. I am trying to do a fresh install of Ubuntu 12.04 64 bit (mistakenly installed the 32 bit 11.10 a little while ago.. I need a 64 bit version to support AOSP build) OVER my the exisiting 11.10 partition. I have referenced How to Install fresh 12.04 install to a PC with dual booting Windows 7 & Ubuntu11.10?, as well as other posts on using the Live CD to do a fresh install. However, the problem I am experiencing is when I bring up the install screen, it says the following: This computer has multiple operating systems on it. What would you like to do. (3 options) Install Ubuntu 12.04 alongside them Replace all with Ubuntu 12.04 (Warning, this will delete files across ALL operating systems) Something else (you can create or resize partitions yourself) This is different from what is in other posts, as mine states that there are "multiple O.Ses" and doesnt individually allow me to replace the Ubuntu 11.10. I don't want to replace ALL O.S.es: I need to preserve Windows 7 and am only trying to replace the old Ubuntu 11.10 partition with the new 12.04 64 bit. I did have Ubuntu installed via Wubi (I believe it was 10.04) prior to putting 11.10 in a separate partition, but I have removed it via Add/Remove programs in Windows. I was wondering how to go about doing this... Should I use the "Something else" option to bring up the partition manager, and just assign my existing 11.10 partition with root mount point + swap space. Will this do the same thing by overwriting with fresh 12.04 install?? I appreciate all your help.

    Read the article

  • Ubuntu 12.04 still slow at mounting internal filesystem

    - by Matthew Goson
    I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

    Read the article

  • Boot process enter an infinite loop after installing Ubuntu 11.04 together with Windos 7 and XP

    - by Andreafc
    I have a new computer ACER Aspire X3960 which came with Widows 7 preinstalled. I made a new partition where I installed Windows XP and then I installed in new logical partitions (a Swap, a / and a /home partition) Ubuntu 11.04. At the end of the process, the computer enters the very first screen where it says "press DEL to enter BIOS setup, press F12 to enter BOOT options". After a few seconds, the screen goes blank, the computer beeps and then it presents the same screen again. It doesn't even ever go to the grub options of which operating system I want to start. It just loops there forever. I tried to fix the (eventually damaged) grub following these instructions (unfortunately in german) http://wiki.ubuntuusers.de/GRUB_2/Reparatur from a LiveUSB, which I'm also using to post this question. Now I found here that someone asked for the results of the Boot Info Script. Here are mine (I hope I did right in trying to upload the file): http://paste.ubuntu.com/736032/ Can anybody help? Thank you very much. Andreafc

    Read the article

  • Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

    - by Joe
    After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

    Read the article

  • Booting Ubuntu 12.04 from external eSATA disk

    - by Lord of Scripts
    This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

    Read the article

  • If I want to dual-boot Ubuntu with another OS, what partitioning method should I use?

    - by Jay
    I have Ubuntu running as a vm in VirtualBox at the moment, but in the future, if I want to dual-boot it with Windows or another OS installed on my hard-drive, what partitioning method should I use to make room for it? 1)Manually partition my hard drive via disk management in Windows (or the equivalent in another OS), making appropriate room for the main partition upon which Ubuntu will be installed and swap space; 2)Partition via the Ubuntu installer options; 3)Use gparted or another free tool like it. I am uncertain as to why I would want to use one over the other. Lastly, am I correct to think that it would be the acme of foolishness to try to partition drives within a virtual machine (since that partitioning would be inherently limited to the limitations set upon it by the virtualization software, e.g., VirtualBox)? Thanks! P.S. Oh, and I am also planning on not modifying the MBR of Windows if I ever do dual-boot with Ubuntu, using instead a piece of free software (like easyBCD or something) to avoid the headaches of Grub being overwritten by a Windows update.

    Read the article

  • Whats a good host for an active vBulletin site?

    - by Kyle
    I've been switching hosts using a VPS each time and I'm just really not sure I'm finding the right VPS's. I've used a VPS from burst.net & rubyringtech and I just feel like it's slowly killing my site because of the slow speed. I really don't know if it's the network or the VPS itself but I really wish to fix this. When I TOP into the VPS peak times it shows this: top - 03:18:56 up 16:33, 1 user, load average: 1.33, 1.40, 1.33 Tasks: 30 total, 1 running, 29 sleeping, 0 stopped, 0 zombie Cpu(s): 27.2%us, 13.6%sy, 0.0%ni, 59.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 679712k used, 368864k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached And pages take atleast a good 2-3 minutes to load. I have only like 50-60 members on the forum also. I had a shared hosting account and the forum was lightning fast.... Is a VPS a bad idea? :\ What should I do to fix this? I'm running lighttpd with xcache, and the latest mysql + php version. The server is a intel i7 2600 w/ 1gb uplink (I think the 1gb uplink is a lie because I've tested the network and the highest download speed I've seen was 20mb/s from a code.google page) All in all I've seen people talking about linode. Should I try them? I honestly don't need a dedicated server yet it's only 50-70 members online. What should I do? I really want a VPS because I enjoy root access. Does anyone have any suggestions?

    Read the article

  • Velvet screen after grub selection

    - by Spleen
    After a fresh install of Ubuntu 11.10 64-bit, the boot seems to stop after selecting the ubuntu option (same with the rescue one) in the grub menu. At first I thought this was related to grub-efi, as I've had similar problems after a Ubuntu 11.04 update which replaced grub-efi with grub-pc and got me stuck on a "elf magic" grub console (https://bugs.launchpad.net/ubuntu/+source/apt/+bug/800910). While the 11.04 problem was resolved with a simple chroot and apt-get install from the live cd, that solution doesn't work this time. The drive with the bootloader is a sata3 ssd with 64 gb gpt (sdb1 20 mb efi boot partition fat16, sdb2 60 gb root ext4 and sdb3 4 gb swap) on a msi e350ia-e45 mainboard with a pair of 2 TB ext4 mbr drives for photos/music/movies. I've tried a few grub-install/update-grub with boot-directory sdb1 from chroot, but I cant seem to go anywhere. Even this guide: http://en.gentoo-wiki.com/wiki/Grub2#EFI (ofc I replaced grub2 with grub in the grub-install and efibootmgr commands) doesnt seem to get me anywhere. Any help or ideas are appeciated ;) edit: I guess its the combination of gpt/uefi that also seems to haunt f16 edit: same with 12.04 beta btw

    Read the article

  • My partition table is facing limitations; having problems creating more partitions

    - by Terence
    I first noticed an issue when trying to install Linux Mint 14 as a third OS alongside Ubuntu 12.10 and Windows 7 - I was unable to create another partition to install Mint to. Poking around, I realised that I had reached the limit of primary partitions: (from left to right of the table) 1) a ~100 MB primary partition that I meant to use for storing Grub files but never got down to, 2) a 25 GB extended partition, with the entire partition containing an ext4 Ubuntu partition, 3) a ~513 GB partition containing Windows 7, 4) some ~50 GB of unallocated space, and finally 5) a 4 GB swap partition. I decided to wipe off the first ~100 MB partition, which I didn't need anyway. This brought me to a dilemma, however: as Ubuntu, during initial installation, had created an extended partition for itself, which meant that I could not create any more. Having an extended partition for Ubuntu is virtually useless as there is only enough space to contain Ubuntu itself, and the benefits of extended are worthless here. And if I go ahead and install Mint now, I would face the same issue of too many primary partitions in the future should I want to create any more. What I'd really like to do is this: convert the current extended partition into a normal primary partition, and create a new extended partition in the unallocated space for all future partitions. Is this possible, and if so how? Thanks in advance!

    Read the article

  • Creating an in-house single source software development team

    - by alphadogg
    Our company wants to create a single department for all software development efforts (rather than having software development managed by each business unit). Business units would then "outsource" their software needs to this department. What would you setup as concerns/expectations that must be cleared before doing this? For example: Need agreement between units on how much actual time (FTE) is allocated to each unit Need agreement on scheduling of staff need agreement on request procedure if extra time is required by one party etc... Have you been in a situation like this as a manager of one unit destined to use this? If so, what were problems you experienced? What would you have or did implement? Same if you were the manager of the shared team. Please assume, for discussion, that the people concerned know that you can't swap devs in and out on a whim. I don't want to know the disadvantages of this approach; I know them. I want to anticipate issues and know how to mitigate the fallout.

    Read the article

  • Moving to New Machine... also upgrade to 64bit. What steps?

    - by Kendor
    I am about to move to a new Lenovo X201 from current X61. Current setup has separate \home, separate swap file, also separate \Data partition. Am currently running 10.04 32 bit. Am considering running 64 bit on new machine because I will now have 8 GB of RAM. And would like to also move to 10.10. Ideally I would like preserve as much of my current setup as possible... New machine has Win7 on it, but will blow that away, as I've made a clonezilla copy of it, and will use VirtualBox for when I need Windows. Can someone suggest a good step by step for me? I'm networked to a NAS and also have plenty of external USB storage in case I need intermediary steps. So do I set up new machine first with 64bit 10.10, with partition scheme I want? then rsnyc over \home from old machine (over write target home)? Do I need to upgrade the X61 first to 10.10?

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >