Search Results

Search found 7872 results on 315 pages for 'unsupported hardware'.

Page 54/315 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Can a Double-Density Floppy drive be swapped out for a High-Density drive?

  - by Ben

  I'm trying to fix the floppy drive in my Roland MC-500. The floppy drive inside is a Matsushita DDF3-1 which doesn't seem to be in production anymore. The DDF3-2 is still available, however it is an HD drive. Does anyone know off the top of their heads if there is any issue with simply swapping the two drives? Could the power usage be different on the drives? Since the machine is expecting a 720k DD drive, are there any jumper settings to have the HD drive function as a DD drive?

  Read the article

• Combo ports and SFP

  - by Tahir

  I have Netgear GSM7324s prosafe switch. Switch has 24x1G ports. 4 ports are labeled as combo ports while 2 are labeled as SFP ports. I connected 2 PCs (each having 1gig and 10Gig NICs), with the switch using 1 & 10 Gig cables. Whenever, I ping the PCs the pinging is not working. As soon as, I removed the 10G cables, the ping starts working. Can someone please explain that what's going on. Also it would be very helpful if you can tell me the concept of combo ports, SFP ports in easy words?

  Read the article

• Software or testing pipeline for testing multiple hard drives

  - by lions_leash

  I have a whole bunch of hard drives (maybe 10 or so) from a variety of sources that I'd like to test. If they work, I will put them in use and/or give them away. I was going to simply open up one of my machines and plug each one in, one at a time, and troubleshoot from there. Is there a way (or set of tools) that I can use to make this process easier and/or faster?

  Read the article

• Is this a normal operating temperature range for a New Third-Generation MacBook Air (2.13 MHz, 120 G

  - by doug

  Even with just my text editor open (no web browser) and maybe the terminal, the baseline temperature is usually above 40 C. When i open 4-5 browser tabs in Safari (even if none of Sites have Flash) the temp can quickly go over 50 C. (In addition, i am observing these temps even though i have turned the fan up to 3000 rpms). (i have install smcFanControl on my MBA so i can see the temp in the menu bar.) So this means my MBA is running much warmer than my MBP; and in practice, it means that i have to be very careful how i use my MBA. Of course if i load a Site with Flash, it just freaks out, and often quickly goes above 65 C (I've installed a flash blocker to avoid this). Is anyone else observing this behavior? I have checked the Apple boards and sure enough, there are a lot of complaints, but nothing from Apple.

  Read the article

• re: 3ware raid 10 (4drive) suggested stripe size suggestions?

  - by dasko

  looked around on the site but nothing really concrete on my question. i will have about 120GB of data total, files are made up of 5MB files, excel, word and about 25 .pst files that are about 1.2GB each. Yes they use .pst over network, even though it is not recommended this is legacy setup without issue so we will continue to support this for another year or so. I need to know what you think about a stripe size of 256kb for the raid 10 based on the above requirements. I did try and bench with these settings and it seems alright without any real issue, just trying to rule out anything i might of missed. thanks.

  Read the article

• Suggestions for a good under-drawer keyboard tray?

  - by Clay Nichols

  I'm looking for a good keyboard tray that would attach to my desk drawer (one of the old metal SteelCase desks). Criteria: Stable and solid (we had one that wiggled and it drove me crazy). Allows the drawer to move in and out. Easy installation would be nice. Inexpensive (<$100) would be nice, but I'll consider expensive ones if they meet all of the above.

  Read the article

• What contributes to smooth online video streaming?

  - by Wesley

  I had a general question about streaming videos online; in particular, on YouTube. What really is required to smoothly stream videos at 360p or 480p? Then for that HD goodness, what really allows a computer to smoothly stream 720p and 1080p? I'm not too sure whether it's to do with the CPU (speed, # cores, cache size), GPU (chipset, VRAM, memory type) or even HDD (IDE vs SATA). What contributes to the ability to stream regular videos and, furthermore, high-definition videos online?

  Read the article

• Computer doesn't start up apart from lights/noise

  - by Casebash

  One of my computers doesn't boot up or at least nothing appears on my screen (not even the bios). It still makes some noise and the lights stay on, but not any beeping like I have heard computer make when start up fails. Before this happened my screen would occasionally have a strange image appear than crash (usually around startup). It would also sometimes just freeze without the image appearing. Any suggestions for how I can attempt to identify the problem?

  Read the article

• What is Light Peak

  - by Jonathan.

  I've heard this a lot recently, todo with Apple and Intel. Some says it's a protocol, others say it's fibre optic, and others say it's copper. One source even said it was a "wireless wire". Apparently it can carry data, but not video streams, surely the cable can't know the difference between 1s and 0s representing data, and 1s and 0s representing video streams. Or it will replace all the wires we currently have except power, another place said it is for inside laptops. Those are just examples so I haven't given any sources, I just want to know what on Earth Light Peak is?

  Read the article

• Computer resetting semi-randomly

  - by Peter

  Hi, I'm having a problem with my desktop whereby it sometimes resets itself semi-randomly. For example, I'll switch it on, it'll boot an OS and shortly after getting to the desktop it will immediately reset with no warning. The time isn't consistent - sometimes it does it before reaching login. I'm pretty sure it's not an OS thing; have tried Ubuntu and a Windows install and both exhibit it. It also doesn't appear to be heat-related because sometimes it appears to be able to "get past" it and will then run stably even under load; if anything it seems to be worse from a cold start. My gut feeling is some kind of power issue but I'm clutching at straws a little. Any suggestions on how I could go about testing it or trying to narrow the problem down would be appreciated. The machine is four years old now so while I can replace components if needed, it's not worth enough that I'm comfortable buying new parts without being pretty confident that they'll fix the problem. Thanks in advance for any help :) Edit: Okay, the motherboard is a MSI K8N SLI; CPU is an Athlon64 X2 4200+. Has one video card, a GeForce 7800GT. 1GB RAM, not sure of brand; 3 hard drives, two SATA and one PATA. Flashed motherboard to latest BIOS some time ago. Edit the Second: I thought I'd narrowed it down to the PSU for a while, but then it recurred again. I ended up pulling everything out but CPU, RAM and motherboard and it still seems to be stuffed (if anything, it's gotten worse in the last couple of days). I assume it's one of those three components, but the machine is old enough that I don't really want to spend money replacing any of them. So thanks for everyone's suggestions; much appreciated!

  Read the article

• Barebones network appliance, 4+ GbE NICs, Intel chipset

  - by gravyface

  Looking for a stepped-up ALIX or Soekris embedded network appliance to load pfSense and/or handle other FOSS-based network roles. Main criteria is a GbE NICs (will be used for core routing/firewalling with managed GbE switches), DDR3 RAM capable, and multi-core/Intel Atom processor, in a 1U rack-mountable case or smaller. Axiomtek has the ideal product but I don't think they have retail channels.

  Read the article

• Wrong Sound Blaster's PCI ID within Windows

  - by pavian

  I own Sound Blaster X-Fi Titanium, it was working with no problems under Linux or Windows 7. It's original PCI ID is 1102:000b but now I see different within MS Windows. BIOS setup: 1102:000b GNU/Linux: 1102:000b Windows 7: 1102:000d Windows 8: 1102:000d In last days I'm experimenting with IOMMU PCI passthrough in Xen and I tried to pass this device to virtual Windows 7 and 8. Here I found this problem. I don't know if this is just coincidence or reason of my problem but it's wrong even in physical system. Windows detects 1102:000d as a High Definition Audio sound device (I guess this name, I have localized Windows, but this is general name, the same was with Realtek HDA before drivers), it's playing but it's unstable (Windows speaker testing can crash that application) and I can't install Creative software. Used driver is hdaudio.sys. Booting in BIOS or UEFI mode doesn't change anything. Nor CMOS clean. Someone met the same problem.

  Read the article

• Diagnosing PCI issues

  - by dtsazza

  I'm upgrading a PC for a friend, and have run into a problem with upgrading the motherboard. I've been assembling custom PCs for the best part of a decade now, so I'm happy enough with the basics at the very least. The motherboard, CPU and graphics card were all updated at once - after this was done, the machine POSTs but the PCI wireless card, as well as the PCI-E graphics card, do not seem to be recognised at all by the system. No trace of them anywhere in the BIOS, or the POST output, or in Windows. I booted into Linux and ran an lspci which also showed up no sign of them. What is the best step to go about diagnosing this? Is it likely/feasible that the motherboard's PCI bus is just defective and it needs to be RMAed? Are there any other common gotchas that might cause these symptoms? For reference, the components in question are: CPU: Celeron E1400 Motherboard: Gigabyte GA-G31M-ES2L Graphics card: TBC (a low end card from a couple of years ago; worked flawlessly before the mobo change) PCI WNIC: Edimax 7128G Thanks in advance for any help.

  Read the article

• What will happen if I (accidentaly) pour a bucket of water inside my pc?

  - by ULTRA_POROV

  Is it dangerous what will happen to me and the PC? EDIT: It's a serious question, the other day i almost spilled a bottle of cola inside my pc (the case was open).

  Read the article

• What will happen if I (accidentally) pour a bucket of water inside my pc?

  - by ULTRA_POROV

  Is it dangerous? What will happen to me and the PC? Edit: It's a serious question. The other day I almost spilled a bottle of cola inside my PC (the case was open).

  Read the article

• What is causing my newly built PC to BSOD?

  - by Ben S

  I recently built my own PC from parts and installed Windows 7 and I have been getting BSODs with various different stop codes. The latest was 0x24, but I've also had 0xd1 and 0x1e. However, Windows does not let me know where the fault occurred, so I have no idea how to go about resolving this. I've uploaded the last three minidumps in case someone can make sense out of them and let me know what could be causing my BSODs. Thanks, Ben

  Read the article

• Is it safe to leave a broadband router running 24/7?

  - by Anirvan

  My father-in-law's ISP warned him in the strictest possible terms to physically turn off his rented Nokia Siemens C2110 PPPoE broadband router when not in use. Everyone I know leaves their broadband router on all the time, and I've never heard of any negative impacts. Is leaving a consumer broadband router running 24/7 really problematic? Is the ISP in question being ridiculously paranoid?

  Read the article

• Firebox 1250e Core Failing?

  - by Noah

  We have 2 Firebox 1250e Core firewall boxes in our production environment, serving as an active and passive mode. A few months back, the active box was flashing a warning light, so our consultant removed it, and plugged it in to a test network. Everything appeared to be working fine, so he reloaded it into the production environment, and we didn't see any other issues. Fast forward to last week, and out network was constantly dropping connections over RDC, timing out, and performing as if there was a traffic issue. I turned off the production box and everything began to work fine immediately. At this point though, I'm not sure how to proceed. Should the box be completely replaced? Is there any recommended testing we could do to determine if there is a failure of some type with this device? Should we try upgrading the software on it? I know the environment isn't the issue, since the passive box (which is now the active one) is working fine. We'd like to have 2 in production though for safety failover purposes. I am not a network admin, but am hoping someone here might be able to provide some guidance.

  Read the article

• Monitor goes black for a few seconds

  - by privatehuff

  I have a Hanns G 28" monitor, Model # HG281D It has its issues (viewing angle sucks) but has been functional and solid, great for desktop stuff. Worked without any sign of any problems for 6-12 months. However, now the monitor "goes black" for about 2-3 seconds, almost like when you click "detect display" It does not turn off (power light does not go amber) The computer is completely unaffected and the video mode never changes when the picture returns. The computer is fully responsive and will keep playing music or taking my keypresses during the time I can't see anything. (it just happened and I kept typing, etc) It happens on multiple computers across several operating systems. (I have an 8-port iogear KVM switch that has several computers connected) But, it seems to happen only on certain computers. I have a hackintosh that does it, a windows 7 PC that does not, a lenovo laptop that does not, and my old ubuntu 8.10 box did not do it, but my new mint 8 box does do it. I've check the connections and tried changing out the power cable and the vga cable. Sometimes it won't happen for hours (or days) and sometimes it happens several times per hour. It was happening many months ago, did not happen for months, and has now started happening again. Does this make any sense? What could it be?

  Read the article

• How to test an AMD athlon 64 X2 processor? Accidentally connected AM2+ processor in AM2 socket.

  - by andres cardona

  I have a motherboard with an AM2 socket. Recently I bought a new processor from Amazon which is AM2+. The new processor seemed to fit into the socket so I plugged it in but I wouldn't boot. Then I did some research and found out that I got the wrong processor. How do I know if the processor was damaged?

  Read the article

• Computer hangs at boot screen with new RAID card

  - by shanethehat

  I am trying to build a new server around a Biostar TH61 motherboard and an Adaptec 6405E RAID controller card. The machine booted fine from USB before the RAID card and drives were installed. After installing, on the first boot the card was detected, but then started to spit out the following message every 10 seconds: Error: Controller Kernel Stopped Running << Press any key to continue ... Following the troubleshooting guide I unplugged everything, reseated the card, and reattached all the drives. This time the machine is sitting on the boot screen without any error messages and flashing a cursor, but after 15 minutes of this, nothing seems to be happening. Given that there are no error messages I'm hesitant to reboot again. Is it normal for a RAID card to sit without a status message when it firsts boots, maybe to initialise the drives or something? The current screen output looks a bit like this: Controller #00 found at PCI Slot:01, Bus:01, Dev:00, Func:00 Controller Model: Adaptec 6405E Firmware Version: 5.2-0[18512] Memory Size: 128MB Serial number: 111111111111111 SAS WWN: 50000D1104AE9180 _ Update: So after waiting 30 minutes I've rebooted back to the Kernal Stopped Running error. Maybe time to update the RAID BIOS.

  Read the article

• Is ASUS P5K-V Comptatable with this Crucial M4 SSD?

  - by Owen Melbourne

  hope alls well, Upgrading my old pc which has an Asus P5K V Motherboard, and im looking to add an SSD to it. I've come across Crucials website which says these 2 products are available http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=49C6AB1FA5CA7304 which is this http://www.ebuyer.com/product/266526 hard drive I believe. Could somebody confirm that these should be compatable? Many thanks

  Read the article

• Are there any good soft keyboards?

  - by oo

  My office is right next to my daughter's room and my typing sometimes wakes her up. Are there any soft keyboards that anyone recommends that would not make as much sound as a regular keyboard when typing?

  Read the article

• Will Software RAID And iSCSI Work For A SAN

  - by Justin

  I am looking for a SAN solution, but can't afford even entry level solutions. Basically, the SAN is for development and a proof of concept product. The performance doesn't have to be amazing, but needs to be functional. My buddy says we should just setup sotware RAID and software iSCSI in Linux. Essentially I have a spare server with dual Xeon processors, 4GB of memory, and (2) 500GB 7200RPM drives. It's a bit old but working. I am sure there is reason people don't do software RAID and iSCSI, but will performance be usable? Thinking of configuring the drives in RAID 0 (for performance).

  Read the article

• Tiny linux box with 2xGbLAN, WLAN and 10MB/s AES throughput?

  - by Nakedible

  I'd like to find a small linux box with the following specifications: Small (mini-ITX size is OK) Fanless Runs Debian At least two gigabit network interfaces WLAN that supports "host ap" with hostapd + mac80211 in AP mode Can encrypt AES at least 10 megabytes per second Total cost $300 or less Solutions from multiple parts also accepted - I can buy an external network card etc. and build the box myself if the components are available. If you don't know about the "host ap" thing, just suggest your solution, I'll find out if I can get that resolved. If I can't get all that, I can possibly skip the "runs Debian" part, and I can definitely skip the hostapd part if the box can be a wireless access point with multiple ESSIDs out of the box. Something like Asus RT-N16 is close - doesn't run Debian easily, and probably doesn't encrypt AES fast enough. Something like Zotac ZBOX HD-ID11 is also close - no idea which WLAN card it has and it lacks second gigabit interface, but otherwise nice.

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >