Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 54/279 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • How do I turn on wireless adapter on HP Envy dv6 7200 under Ubuntu (any version)?

    - by Dave B.
    I have a new HP Envy dv6 7200 with dual boot Windows 8 / Ubuntu 12.04. In windows, the F12 key in Windows activates the "airplane mode" switch which enables/disables both on-board (mini PCIe) and USB wireless adapters. In Ubuntu, however, the wireless adapter is turned off by default and cannot be turned back on via the F12 key (or any other combination of F12 and Ctrl, Fn, Shift, etc.). Let me explain the "fixes" I've seen in various forums and explain what did or did not happen. These are listed in no particular order. (Spoiler alert: wireless is still broke). Solution 1? Use HP's "Wireless Assistant" utility to permanently activate the wireless card in Windows, then boot into Ubuntu to happily find it working. Unfortunately, this utility works in Windows 7 but not Windows 8. On the other hand, hardware drivers from HP are only available for Windows 8 for this model. Catch 22 (I could not find a comparable utility for Windows 8). Solution 2? Use a USB wireless adapter to sidestep the on-board device. I purchased such a device from thinkpenguin.com to be sure that it would be Linux-friendly. However, the wireless switch enables / disables all wireless devices including USB. So, there's my $50 donation to the nice folks at thinkpenguin.com, but still no solution. Solution 3? Following the Think Penguin folk's suggestion, modify the mini PCI express adapter following instructions here: http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix Tempting, but I then violate the terms of my warranty mere days after opening the box. This might be a good solution for an older machine that you want to get your geek on with, but not for a new box. Solution 4? rfkill unblock all No effect whatsoever. ubuntu@ubuntu-hp-evny:~$ rfkill unblock all ubuntu@ubuntu-hp-evny:~$ rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Solution 5? Re-install drivers. Done and done. Ubuntu recognizes the device - perhaps even without re-installing the drivers? - but cannot turn it on. How do I know this? In the Network Manager drop-down menu, the wireless option is blacked out and a message reads something like: "wireless network is disabled by a hardware switch". Solution 6? Identify a physical switch on the laptop and flip it. There is no such switch on this machine. In fact, walking through Best Buy yesterday, I checked and not a single new laptop PC had a physical switch on it. All of the wireless switches are either the F2 or F12 key ... I wonder if askubuntu will not be plagued by this exact issue in the near future? Additional info - lspci ubuntu@ubuntu-hp-evny:~$ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01) 0a:00.0 Network controller: Ralink corp. Device 539b 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Any suggestions would be much appreciated!

    Read the article

  • USB Endpoint Stalled Error

    - by Harsha
    Hi All, I am getting "endpoint stalled error" in my CDC device. The usb stack is detecting the cable. The state is set as running but the errorcode is set as 0x11 which indicates 'USB_ENDPOINT_STALLED'. I verified and found that the endpoints has been assigned properly. What would be scenarios when "endpoint stalled error" would be reported? How to handle this? Please advise!

    Read the article

  • Help finding a USB Joystick mouse?

    - by shane87
    I am currently developing a final year project which involves using a joystick instead of the mouse for those who are physically impaired. Does anyone know where I can find a USB Joystick mouse? All I can find on e-bay and amazon is very sophisticated flight joysticks with loads of buttons and controls etc. I am looking for a plain and simple joystick? If anyone could point me in the right direction I would be very grateful.

    Read the article

  • crc check in a sector of usb pendrive

    - by nithin
    I am trying to check for the data integrity in fat32 filesystem.Currently I have implemented fat on lpc2478. For the checking of data integrity, I come to know that each sector of a disk has checksum or CRC.But I wanted to find the location of the CRC in the sector.Can you please advice me on how to find the location of the CRC in a sector of usb pendrive? and will this CRC change with manufacturer of the pendrive.?

    Read the article

  • linux usb driver: probing already plugged devices

    - by jacob
    hello, im writing a Usb driver and i have an issue. when i insmod the driver with the device already plugged in before, the probe function is not called. it is only called after i disconnect the device and plug it again. i wanna make it work when i start my pc with the device plugged in. could someone please help me? best regards, jacob.

    Read the article

  • Monitor USB optical mouse activity for movement and call a program on Windows

    - by CheeseConQueso
    I'm essentially looking to monitor a USB port input for whatever happens when the optical mouse detects its own movement and turns itself on. These mice usually have a dim red light when in "standby" mode and then the red light becomes brighter once you start moving it around. I want to use Visual Basic or something else native to the Windows environment to open an exe file or play a wav sound or call a bat file when the mouse "wakes up". Any suggestions or pushes in the right direction are appreciated.

    Read the article

  • Start program on usb hardware plugin

    - by petebob796
    Is there a way to detect when a specific device is plugged into a usb port, what I would like to happen is when I plug my laptop into my docking station it run up several apps to account for my different keyboard, mouse and monitors. Specifically I have an issue with some software for my G15 keyboard stopping media player closing properly. Hopefully in .NET but if not any suggestions appreciated.

    Read the article

  • What (software) usb sniffers are available for windows?

    - by frankster
    Are there any software drivers for windows 7 (64-bit) that can report the data transferred between some application software and a usb device? I have tried snoopy (http://sourceforge.net/projects/usbsnoop/) but I can't get it working. Possibly I would need to go down the route of installing an earlier version of windows. Any other suggestions?

    Read the article

  • Install usb device without manager prompt

    - by Pat
    We have a usb device and the drivers (.inf, libusb.dll, libusb.sys) and can install it using Windows' Device Installation Wizard (by pointing to the .inf file). However, we need to install the drivers without using the wizard (passively, so the user doesn't need to do anything). Does anyone know how this can be achieved?

    Read the article

  • USB token with certificate

    - by Frengo
    Hi all! Someone could explain me how the USB token works? I have to implement that secure layer in a java application, but i don't know very well how it works! I know only the mecanism of a normal token key generator! Thanks a lot!

    Read the article

  • Do USB interrupt transfers guarantee order?

    - by ulidtko
    I've found in the fairly awesome book titled "USB in a NutShell" that interrupt transfers provide reliable delivery (via error detection and automatic retry). But I wonder, does that guarantee that transfers will not be swapped in order someday? As far as the bus is serial, my guess is that yes, reordering should never occur. But I'm not really much into this, so having doubts. Could somebody clarify?

    Read the article

  • Combination USB Drive / Bluetooth Adapter Device

    - by ghawkes
    I am looking for a combination USB device that is both a flash drive and a Bluetooth adapter. Has anyone seen an item like this available recently? I found some old articles circa 2004 but could not find anything current. Could anyone recommend a company or service that could help me find an item like this? Thank you, - G

    Read the article

  • My Android 2.1 Nexus One, rooted and unlocked and unplugged and unchained! Unfreakinbelievable!

    - by misbell
    So anyway. i fastbooted and superrooted, and all's fine in the merry old land of Oz. So yeah, now I can see /data/data.. in DDMS, both the plugin and the tool, which is great. but when I attach my phone, I still can't see the main drive. All I can see is the SD card. Using OSX, so when I use Disk Utility, I can see the machine then see the SD Card. is the problem that none of the tools I am using, except DDMS and ADB shell, know how to read that main Android drive? It's the same format as the qemu img, right? Someone HAS to come up with a tool that can do this, let me hack my phone and access the main drive via my USB connector, and mount that drive on my native file system. It just can NOT be that hard. Err, can it? All smiles! Michael

    Read the article

  • How do I mount my Android phone's filesystem on MacOS X? [closed]

    - by misbell
    I'm running a fully rooted Nexus One with Android 2.1. I can see /data/data in DDMS, both the plugin and the tool -- but when I attach my phone, I still can't see the main drive. All I can see is the SD card. Using OSX, when I use Disk Utility, I can see the machine then see the SD Card. Is the problem that none of the tools I am using, except DDMS and ADB shell, know how to read that main Android drive? It's the same format as the qemu img, right? Again -- my goal is to mount the phone's root filesystem on my MacOS X host when connected via USB.

    Read the article

  • How to create NTFS partition in Linux to install Windows 7 from USB?

    - by Michal Stefanow
    I messed up with my computer and need help. Generally: install Windows 7 from USB. Problem: "setup was unable to create a new system partition" When first attempt to install Windows 7 failed I tried Linux live USB, installed distro to HDD, and erased all the existing partitions. Current state (fdisk -l): [writing from other computer so no copy and paste] /dev/sda1 305GB Linux /dev/sda2 7GB Extended /dev/sda5 7GB Linux Swam / Solaris To create a new, NTFS partition: fdisk /dev/sda n (for new) p (for primary) 3 (for partintion number) "No free sectors available" All the HDD was formatted couple of minutes before so there is a lot of free space but how to resize a parition? I cannot find an option for resizing in man fdisk. Some people say I should use gparted but my distro doesn't not contain this package. And my distro doesn't support wireless drivers so I have serious problems with downloading stuff. I tried also using cfdisk but any command results in: "cfdisk bad primary partition 1 partition ends in the final partial cylinder" I tried also removing partition 1 and then creating a new one (so there is no "no free sectors"). I'm receiving a warning: "Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot." After restating: "grub rescue, no known filesystem" It may indicate that some changes have been made BUT when running Windows 7 installed some another error: "Windows cannot be installed to Disk 0 Partition 1" More detailed: "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS." So formatting drive using Windows 7 installer BUT this time yet another error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information" Apparently I cannot access logs (how?) and I am back to drawing board with my live USB (this time showing partition as HPFS/NTFS). Any suggestions how to install Windows 7? Should I reinstall Linux to HDD, erase existing partitions once again, and use Parted rather than gparted (parted is included in the distro). Or maybe should I create another bootable USB such as PartedMagic to painlessly create partitions? I just want to install Windows 7 from USB, my laptop is semi-operational and I am ready to receive some help regarding fdisk and creating NTFS partitions. UPDATE: I did as suggested (removed all the partitions) and tried to install in unallocated space. Tried to create a new partition and format it. Same error: "setup was unable to create a new system partition" Came to the conclusion it may have something to do with TrueCrypt I have recently installed. Right now trying to FIX MBR (as I haven't got possibility to create rescue disc without optical drive)

    Read the article

  • new hard drive on Dell Adaptec 2610SA 6 port SATA RAID PCI card

    - by Ragnarok85
    I have a Dell Adaptec 2610SA 6 port SATA RAID PCI card with 3 hard drives on it and everything works fine. I plugged another hard drive to it and the system (Ubuntu 12.04, 64 bit) seems not to recognize it. Strange thing is that, as happened in the past, if I re-install the system, it recognizes the new hardware plugged to RAID card. Of course I don't want to re-install ubuntu each time I plug a new hard drive on my RAID card. Any idea? Thank you in advance

    Read the article

  • Fake RAID (dmraid) not seeing new SATA drives

    - by rausch
    I have three drives in my machine, one SSD with 32GB and two 1TB drives, attached to an Intel 82801JI (ICH10) SATA AHCI Controller. The problem is, that I can access only one of the 1TB drives when the other one is not plugged in. When it is plugged in I see the drives as sda and sdb, but there seem to be no partitions. Looking at these drives with cfdisk, the partitions are there, though. Both of the 1TB drives are carrying a partition, being part of a software RAID1, created with mdadm. Before I threw the SSD into the mix, the other two have been working fine. Any hints?

    Read the article

  • Unable to boot ubuntu 11.10 from external usb drive

    - by user45006
    I'm new to Ubuntu (and actually all things Linux) as of this morning, so please excuse any stupid mistakes I may be making. I recently bought an external hard drive for my newly built PC (that is running windows 7 if it matters). I would like to install Ubuntu onto the external drive and boot from there. I downloaded Ubuntu 11.10 and made a bootable cd, unplugged my internal HDDs, plugged in the external drive, installed Ubuntu 11.10 on the external drive via the installer, and replugged in my internal HDDs. Then I set my bios boot order to: Boot from USB-HDD - Boot from Hard Disk - Boot from CD/DVD. Now when I restart I get the message "Starting Operating System..." (or something like that, I forget exactly what it says) that lingers on the screen for a moment and then windows starts. Any idea what the problem may be? ~Relevant info~ BIOS version: Award Software International, Inc. F2, 2/22/2011 Ubuntu Version: 11.10 External Hard Drive: Western Digital My Passport Essential 500GB Portable Hard Drive (Black) ~Things I've already tried~ 1) Unplug internal HDDs so that only external drive was plugged in via usb. Same thing happened only obviously my BIOS could not detect any hard drives besides the external one. When booting received error "Could not detect operating system" 2) Formatted external hard drive and re installed. It didn't make a difference, however interestingly when I booted from cd the ubuntu installer said it detected ubuntu 11.10 on the external hard drive. 3) Within BIOS I've messed around with every boot order combo I could think of both in the "Hard Disk boot order" screen and the "Boot order" screen. I'm a little confused of why there are two screens for this. 4) Held F12 during startup which opens (what I think is) the one time boot screen and it gave me the options "Hard Drive", "cd/dvd", "USB-FDD", "USB-cdrom", "USB-HDD", and "USB-something else I can't remember what it was". I tried all of them, but the same thing as before happened each time. ~References~ I noticed several people on askubuntu have tried to do something similar if not the exact same. In fact, I even found a post that pretty much outlines step by step exactly what I did... only their's worked. /jealous. Linky: Install Ubuntu or Kubuntu on a External USB Drive I'm willing to try a different version of ubuntu - it's not like my heart is set on 11.10, but it's a pain to open my case and unplug my internal hard drives so I'd prefer not to do this unless someone is reasonably confident it'll work. Thank you for all of your help in advance! I'm really looking forward to exploring Ubuntu!

    Read the article

  • Why does USB thumb drive screw up boot sequence?

    - by Carl B
    I am looking for understanding to a boot issue. I have at times had some files and such that I save and retrieve from my thumb drive. I use the front panel as it is nice and easy to get to and I typically power down my system nightly. If I forget to pull the drive and power on the system, it becomes the first bootable device. As there is no OS on the USB Drive I get the BOOTMGR is missing press CTRL+ALT+DELETE. When I go into BIOS to see Boot sequence, there’s the thumb drive up top, DVD drive is missing and not found in the list of devices. All of the hard drives are next in line. When I pull the USB drive, and reboot, everything is back to normal. Old boot sequence is in place, DVD drive right where it should be and no issues. So why does this happen with a USB drive in port at boot up? If it can’t be booted from, shouldn’t the next drive be attempted? Note: This happens when the thumb drive is plugged into a USB port on the front panel. It does not seem to happen on rear panel ports.

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >