Search Results

Search found 13360 results on 535 pages for 'xubuntu 11 04'.

Page 54/535 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Ubuntu Server 10.04 Heavy Network Traffic causes disconnect

    - by K Vaughan
    I'm currently running a headless Ubuntu 10.04 server. Installed is the LAMP stack, Joomla, Virtualbox, phpvirtualbox, webmin and proFTP.. It resolves the IP address so I can access it remotely (either the apache2 webserver or the FTP) using DDClient. Any packages installed have been installed using apt-get. Webmin, although discouraged in Ubuntu Server, is used mostly to administer the webserver aspect. This issue also appeared when I was using Ubuntu Server 10.10. After periods of heavy network traffic, whether local or remote, the connect drops. I'm talking specifically about the transfer of files via FTP, SCP or Samba (the latter of which I seldom use). There is no response to ping or ssh. I can't FTP to the server nor can I load the website. There are times when the server has been on for a few days and everything runs fine because I haven't accessed it much, if at all (thus not much network traffic). I've gone through a few hardware changes although I don't believe this has cause the issue: this has been happening long before I made any changes. At first I thought it was my ISP-provided router blocking traffic because of some kind of misconfiguration (perhaps assuming it was some kind of DoS attack). I've changed routers and still found no success. I've checked syslog, dmesg and kern.log for warnings but have uncovered none. I've ran memtest via the GRUB2 menu at boot and once it turned up 4 errors. I ran again with individual sticks of RAM in various slots and everything turned up fine. I've looked through the BIOS settings and everything looks fine. I've tried unplugging unnecessary pieces of hardware (other internal hard drives, CD drives, floppy, PCI cards, etc). Any help or tips on how I can even begin to troubleshoot this would be very much appreciated. Please note that i've only started playing with servers as a hobby so my knowledge wouldn't be the most refined. I'm comfortable with command line and have the initiative to know how to look up something I can't do. Unfortunately I can't seem to find any issues like this. Additionally: If a solution can't be found some assistance to write a script that will cause the server to reboot automatically if, after x minutes, it gets no response to pinging somewhere like google. Admittedly that's not the cleanest solution should my internet end up going down but I can't think of what else to do.

    Read the article

  • Upgrading Ubuntu 9.10 to 10.04 Problem: No Internet Connection?

    - by damx
    Earlier today I tried upgrading my Ubuntu 9.10 Karmic Kaola from the update manager. (FYI: all 9.10 updates were applied prior to this) Everything was going well downloading until I got an error dialog informing me that some software packages weren't downloaded because of an Internet connection. Would say it was halfway thru. Anyway, Was told that the software packages that it did download, however, would kept and I figure it's not a big deal. Just run it again. But first ran Firefox to verify my connection as I haven't had any connection problems. But my internet connection was/is fine as evident by this posting. With that cleared, I ran the update manager again, clicked on "Upgrade" and this time I received "Could not download the release notes. Please check your internet connection" This is my first time dealing with Ubuntu and my first upgrade so I am hoping someone can help. Not sure what the problem can be. I can surf the web with no problems. PS: There was no installing at any point. Just downloading. PSS: The software it managed to download the first time around is now visible in the update manager but don't think I should install as I see in the compiz description it's for v1:0.8-4-0ubuntu2 I figure it's designed for 10.04 and might ruin things further if I install.

    Read the article

  • Setting lusca and dansguardian iptables on Ubuntu 12.04 to prevent loop

    - by Heri YT
    I have a server with ubuntu 12:04 operating system, which runs as a proxy cache server lusca and DansGuardian as well as internet content filter. With the following composition: the client browser - lusca - DansGuardian - internet. And all this running only on one machine only, the following is a partial configuration on my server lusca: http_port 3128 transparent cache_peer 192.168.0.1 parent 8080 0 no-query no-digest no-netdb-exchange default which is also only found on the DansGuardian default settings namely: filterip="blank" filterport=8080 proxyip=192.168.0.1 proxyport=3128 The question is: Can all goes well? By simply relying on one machine only? What causes the "WARNING: Forwarding loop detected for:"? is not problematic if we leave? How to solve "WARNING: Forwarding loop detected for:" found in / var / log / lusca / cache.log Thank you.

    Read the article

  • Graphics and USB devices freezing soon after OS loads

    - by Andrew
    I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

    Read the article

  • Slower wireless speed in Ubuntu 12.04 (64-bit) on Asus USB-N13

    - by PhantonTurtle
    I have an Asus USB-N13 which I use for wireless internet on my desktop. The download speed I get on Windows 7 (dual-boot) is 15.22 Mbps. On Ubuntu 12.04 (64-bit) I can only get 1.09 Mbps. I asked a question about this on the Ubuntu forums as well, but I did not get an answer. Here is the output from lsmod | grep rt which gives me, parport_pc 32866 0 rtl8192cu 103297 0 rtl8192c_common 75767 1 rtl8192cu rtlwifi 111202 1 rtl8192cu mac80211 506816 3 rtl8192cu,rtl8192c_common,rtlwifi cfg80211 205544 2 rtlwifi,mac80211 parport 46562 3 parport_pc,ppdev,lp I installed the drivers from Realtek (my chipset is Realtek, not Ralink) but that did not work.

    Read the article

  • Ubuntu 12.04 Samba File Server timeout on large file

    - by phileaton
    I am a beginner with servers. I checked the error logs for Samba and it appears that Samba is timing out when I transfer large files. I can successfully add pdfs for instance to my file server. However, I tried to add a large 1.2gb video file and it did not succeed. This is the error in the log: smbd/process.c:244(read_packet_remainder) read_fd_with_timeout failed for client 0.0.0.0 read error = NT_STATUS_CONNECT$ Is there a way I can stop it from timing out? Any pointers would be great! Thanks!

    Read the article

  • ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

    - by TecBrat
    The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

    Read the article

  • How to install Apache 2.4.3 on Ubuntu 12.04

    - by SFox
    I have a clean, fresh OS of Ubuntu 12.04 on my VPS. My goal is to install WordPress. I want to install the latest version of Apache (2.4.3) but I'm encountering two problems. I'm following instructions like this & this. Both produced the same errors. The first I encounter after running "./configure --prefix=/usr/local/apache2 --with-included-apr --with-included-apr-util " the system says "It must specify an install prefix, a build directory, or an apr-config file" The second I encounter immediately afterwards, when I attempt to run make or make install. "No targets specified and no makefile found. stop." I honestly have not been able to find a solution for either, and I'm now looking for some help from the community. Any help would be greatly appreciated.

    Read the article

  • Installing APC on lighttpd + php 5.2 on Ubuntu 10

    - by Patrick
    I found several tutorials internet about how installing APC (PHP cache) with php5 and apache on Ubuntu, and I've also found some about installing it with lighttpd + php5 on Debian. I actually need a tutorial for installing APC on servers with the following configuration: lighttpd + php 5.2 on Ubuntu 10 I know it should be pretty similar, but if I found the exact tutorial I could save time. Could you help me ? thanks

    Read the article

  • Why does this package (ppa:ondrej/php5, it's PHP 5.5) break the apache2 installation?

    - by Panique
    Problem Currently this package (ppa:ondrej/php5) is quite popular for installing the latest version of PHP 5.5. I've worked quite much with it, and everything ran smoothy, on several (dev) servers. But from today (?) this breaks the apache2 installation (it empties the /etc/apache2/sites-available/default file). This is reproduceable. Way to reproduce (on naked Ubuntu 64 12.04 LTS) // basic installs sudo apt-get update sudo apt-get install apache2 sudo apt-get install php5 Apache is fine, nano /etc/apache2/sites-available/default has valid content now // getting PHP 5.5.x sudo apt-get install python-software-properties (for add-apt-repository) sudo add-apt-repository ppa:ondrej/php5 sudo apt-get update sudo apt-get install php5 // php -v shows successful install of PHP 5.5.x now Apache is broken, nano /etc/apache2/sites-available/default is empty now Question Why does this happen ? According to https://launchpad.net/~ondrej/+archive/php5 there were no changes in the last few days.

    Read the article

  • How to format DVD-RAM?

    - by AndrejaKo
    I have few DVD-RAM disks and when using udftools, specifically sudo mkudffs --media-type=dvdram /dev/sr0 where /dev/sr0 is my DVD-RAM drive, I get trying to change type of multiple extents and nothing happens. What should I do? EDIT After trying with dvd+tools, here's what I got: #dvd+rw-format /dev/dvd -format=full -ssa=default * BD/DVD±RW/-RAM format utility by <[email protected]>, version 7.1. * 4.6GB DVD-RAM media detected. * formatting 54.8| And same error as before from mkudffs.

    Read the article

  • GlusterFS is failing to mount on boot

    - by J. Pablo Fernández
    I'm running the official GlusterFS 3.5 packages on Ubuntu 12.04 and everything seems to be working fine, except mounting the GlusterFS volumes at boot time. This is what I see in the log files: [2014-06-13 08:52:28.139382] I [glusterfsd.c:1959:main] 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.5.0 (/usr/sbin/glusterfs --volfile-server=koraga --volfile-id=/private_uploads /var/www/shared/private/uploads) [2014-06-13 08:52:28.147186] I [socket.c:3561:socket_init] 0-glusterfs: SSL support is NOT enabled [2014-06-13 08:52:28.147237] I [socket.c:3576:socket_init] 0-glusterfs: using system polling thread [2014-06-13 08:52:28.148183] E [socket.c:2161:socket_connect_finish] 0-glusterfs: connection to 176.58.113.205:24007 failed (Connection refused) [2014-06-13 08:52:28.148236] E [glusterfsd-mgmt.c:1601:mgmt_rpc_notify] 0-glusterfsd-mgmt: failed to connect with remote-host: koraga (No data available) [2014-06-13 08:52:28.148251] I [glusterfsd-mgmt.c:1607:mgmt_rpc_notify] 0-glusterfsd-mgmt: Exhausted all volfile servers [2014-06-13 08:52:28.148477] W [glusterfsd.c:1095:cleanup_and_exit] (-->/usr/lib/x86_64-linux-gnu/libgfrpc.so.0(rpc_transport_notify+0x27) [0x7fe077f8e0f7] (-->/usr/lib/x86_64-linux-gnu/libgfrpc.so.0(rpc_clnt_notify+0x1a4) [0x7fe077f91cc4] (-->/usr/sbin/glusterfs(+0xcada) [0x7fe078655ada]))) 0-: received signum (1), shutting down [2014-06-13 08:52:28.148513] I [fuse-bridge.c:5444:fini] 0-fuse: Unmounting '/var/www/shared/private/uploads'. My fstab contains: proc /proc proc defaults 0 0 /dev/xvda / ext4 noatime,errors=remount-ro 0 1 /dev/xvdb none swap sw 0 0 /dev/xvdc /var/lib/glusterfs/brick01 ext4 defaults 1 2 koraga:/private_uploads /var/www/shared/private/uploads glusterfs defaults,_netdev 0 0 Any ideas what's going on and/or how to fix it?

    Read the article

  • [Ubuntu 10.04] mdadm - Can't get RAID5 Array To Start

    - by Matthew Hodgkins
    Hello, after a power failure my RAID array refuses to start. When I boot I have to sudo mdadm --assemble --force /dev/md0 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 to get mdadm to notice the array. Here are the details (after I force assemble). sudo mdadm --misc --detail /dev/md0: /dev/md0: Version : 00.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 6 Total Devices : 6 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 17 23:02:38 2010 State : active, Not Started Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 128K UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1249691 Number Major Minor RaidDevice State 0 8 65 0 active sync /dev/sde1 1 8 81 1 active sync /dev/sdf1 2 8 97 2 active sync /dev/sdg1 3 8 49 3 active sync /dev/sdd1 4 8 33 4 active sync /dev/sdc1 5 8 17 5 active sync /dev/sdb1 mdadm.conf: # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions /dev/sdb1 /dev/sdb1 # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # definitions of existing MD arrays ARRAY /dev/md0 level=raid5 num-devices=6 UUID=44a8f730:b9bea6ea:3a28392c:12b22235 Any help would be appreciated.

    Read the article

  • after enabling mod ssl apache stops listening on port 80

    - by zensys
    I have an ubuntu 12.04 server with zend server CE installed. I now wanted to enable https but after the first steps according to the documentation, 'a2enmod ssl' and 'apache service restart', apache does not listen on 443 but neither on 80, according to netstat -tap | grep http(s)! This is what I see in my error log, but I can't make much of it: [Fri May 25 19:52:39 2012] [notice] caught SIGTERM, shutting down [Fri May 25 19:52:41 2012] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Fri May 25 19:52:41 2012] [notice] ModSecurity for Apache/2.6.3 (http://www.modsecurity.org/) configured. [Fri May 25 19:52:41 2012] [notice] ModSecurity: APR compiled version="1.4.5"; loaded version="1.4.6" [Fri May 25 19:52:41 2012] [warn] ModSecurity: Loaded APR do not match with compiled! [Fri May 25 19:52:41 2012] [notice] ModSecurity: PCRE compiled version="8.12"; loaded version="8.12 2011-01-15" [Fri May 25 19:52:41 2012] [notice] ModSecurity: LUA compiled version="Lua 5.1" [Fri May 25 19:52:41 2012] [notice] ModSecurity: LIBXML compiled version="2.7.8" [Fri May 25 19:53:11 2012] [notice] ModSecurity for Apache/2.6.3 (http://www.modsecurity.org/) configured. [Fri May 25 19:53:11 2012] [notice] ModSecurity: APR compiled version="1.4.5"; loaded version="1.4.6" [Fri May 25 19:53:11 2012] [warn] ModSecurity: Loaded APR do not match with compiled! [Fri May 25 19:53:11 2012] [notice] ModSecurity: PCRE compiled version="8.12"; loaded version="8.12 2011-01-15" [Fri May 25 19:53:11 2012] [notice] ModSecurity: LUA compiled version="Lua 5.1" [Fri May 25 19:53:11 2012] [notice] ModSecurity: LIBXML compiled version="2.7.8" [Fri May 25 19:53:12 2012] [notice] Apache/2.2.22 (Ubuntu) PHP/5.3.8-ZS5.5.0 configured -- resuming normal operations and here is my httpd.conf: # Name based virtual hosting <virtualhost *:80> ServerName www-redirect KeepAlive Off RewriteEngine On RewriteCond %{HTTP_HOST} ^[^\./]+\.[^\./]+$ RewriteRule ^/(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] </virtualhost> Alias /shared/js "/home/web/library/js" Alias /shared/image "/home/web/library/image" <IfModule mod_expires.c> <FilesMatch "\.(jpe?g|png|gif|js|css|doc|rtf|xls|pdf)$"> ExpiresActive On ExpiresDefault "access plus 1 week" </FilesMatch> </IfModule> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn <Directory /> Options FollowSymLinks AllowOverride None Order allow,deny allow from all </Directory> <Location /> RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ /index.php [NC,L] </Location> netstat -tap gives: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:mysql *:* LISTEN 765/mysqld tcp 0 0 *:pop3 *:* LISTEN 744/dovecot tcp 0 0 *:imap2 *:* LISTEN 744/dovecot tcp 0 0 *:http *:* LISTEN 19861/apache2 tcp 0 0 *:smtp *:* LISTEN 30365/master tcp 0 0 *:4444 *:* LISTEN 634/sshd tcp 0 0 *:kamanda *:* LISTEN 1167/lighttpd tcp 0 0 *:imaps *:* LISTEN 744/dovecot tcp 0 0 *:amandaidx *:* LISTEN 1167/lighttpd tcp 0 0 localhost.loc:amidxtape *:* LISTEN 19861/apache2 tcp 0 0 *:pop3s *:* LISTEN 744/dovecot tcp 0 384 mail.mysite.:4444 231.214.14.37.dyn:41909 ESTABLISHED 19039/sshd: web [pr tcp 0 0 localhost.localdo:mysql localhost.localdo:48252 ESTABLISHED 765/mysqld tcp 0 0 mail.mysite.:http 231.214.14.37.dyn:54686 TIME_WAIT - tcp 0 0 mail.mysite.:4444 231.214.14.37.dyn:42419 ESTABLISHED 19372/sshd: web [pr tcp 0 0 localhost.localdo:48252 localhost.localdo:mysql ESTABLISHED 19884/auth tcp 0 0 mail.mysite.:http 231.214.14.37.dyn:54685 TIME_WAIT - tcp6 0 0 [::]:pop3 [::]:* LISTEN 744/dovecot tcp6 0 0 [::]:imap2 [::]:* LISTEN 744/dovecot tcp6 0 0 [::]:smtp [::]:* LISTEN 30365/master tcp6 0 0 [::]:4444 [::]:* LISTEN 634/sshd tcp6 0 0 [::]:imaps [::]:* LISTEN 744/dovecot tcp6 0 0 [::]:pop3s [::]:* LISTEN 744/dovecot Anyone knows what I am doing wrong? Perhaps I should take some additional steps to make apache listen 0n 443 but that it stops listening on 80 altogether I can't understand.

    Read the article

  • Is the field BusID necessary in XF86Config?

    - by Greg
    Hello, I am using a cluster of machines running on Ubuntu 10.04 LTS which are supposed to be homogeneous, but apparently they are not. In particular, I am configuring the X server on these machines, and I pushed a /etc/X11/XF86Config that includes the following section: Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BusID "PCI:5:0:0" EndSection The problem is that the BusID of the graphic card is PCI:5:0:0 for some machines, and PCI:3:0:0 for others. Is there a way that the X server automatically detects the appropriate Device (based on the name for instance)? Thanks,

    Read the article

  • VMWare ESXi virtual machine can contact the gateway but not the DNS server

    - by Nathan Palmer
    I am having a bit of a strange issue. I have a VMWare ESXi server with two virtual machines running on it. They are running just fine and can communicate on the network without a problem. I am now trying to add a third. I am installing Ubuntu 8.04 Server. I assign it a static IP address and it's a fresh installation. Once installed I can ping the gateway but I cannot ping the DNS server. It's on the same network with the other two VMs which are communicating just fine. I have tried to reinstall the operating system but it still fails to connect. Here is /etc/network/interfaces auto eth0 iface eth0 inet static address 192.168.1.23 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 208.67.222.222 #opendns dns-search mydomain.com Here is route Destination | Gateway | Genmask | Flags | Metric | Ref | Use | Iface localnet | * | 255.255.255.0 | U | 0 | 0 | 0 | eth0 default | 192.168.1.1 | 0.0.0.0 | UG | 100 | 0 | 0 | eth0 Since I'm running this behind a FortiGate this is what the sniff command gives me when I try to ping 208.67.222.222 arp who-has 192.168.1.1 tell 192.168.1.23 arp reply 192.168.1.1 is-at MAC 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request As you can see it looks like I never get a response. One interesting thing I notice is the arp reply's MAC doesn't look right. I have cleared the FortiGate's ARP cache though and checked the entry and it seems correct. The MAC it lists is the one for the router. However if I ping from a different virtual machine that is also Ubuntu 8.04 with a nearly identical configuration I get this. 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply So, what could I be missing? Thanks.

    Read the article

  • Free Hosting control panel

    - by John Maxim
    I'm in the mid of researching for one of the best hosting control panels. The server I run is Ubuntu and I have some experience with ISPConfig 2 & 3. Since I haven't explored any others available, what are the recommended ones for an Ubuntu server? I asked because I find that there seems to be some disabling and modifications required for an Ubuntu server if I need to use ispconfig which causes the server to change its actual way of running. It's quite good though, but any more recommended ones ? Something more organic? which doesn't require much breaking and changing. I'm not asking for the simple one, I don't mind going extra mile to install a powerful one but just try sticking with most Ubuntu's conventions will be an ideal one for me. And of course, if there happens to be something that meets the requirement as mentioned "Ubuntu conventions" and also simple to install at the same time, that'd be a bonus. Thanks in advance.

    Read the article

  • rsync error: some files/attrs were not transferred

    - by Daniel Ball
    Using rsync(ubuntu) and a DeltaCopy server on W2K3 to back up some of the data on the file server before I migrate from W2K3 to Ubuntu server. After it completed I ran a dry run just in case something had been missed or changed ... I got the following: sudo rsync -az -n 198.3.9.25::Music /mnt/raid/music [sudo] password for daniel: file has vanished: "?????\#267????" (in Music) file has vanished: "????????" (in Music) ... rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1526) [generator=3.0.7] I just want to make sure I'm reading it right, that somehow there are files on the receiving end that aren't on the sending?

    Read the article

  • How do I redirect the kernel console output on Ubuntu 10.04

    - by lorin
    When I reboot my Ubuntu 10.04 nodes, I'd like to be able to see the kernel boot messages when connecting to the IPMI interfaces using Serial Over LAN mode (ttyS0). What do I need to do to be able to redirect these messages to ttyS0? Ideally, I'd like them to also still appear in the usual place (tty0, I think) for when I plug a monitor directly into the box.

    Read the article

  • Ubuntu with Netatalk and Samba TimeMachine can't connect

    - by Philip
    I installed netatalk on my Ubuntu Server a few weeks ago and configured it so that I could use Timemachine from my mac to backup on a server instead of a external hard drive. It worked really good until yesterday when I installed Samba to be able to share certain folders on my server to my mac. Now I receive an error msg: There are no shares available or you are not allowed to access them on the server. Please contact your system administrator to resolve the problem. From what I understand is that the problem is on the server and not on my mac. I have tried to restart the computer and without adding any of the folders Samba is sharing adding the timemachine "afp://...@...". Is there a problem running them both at the same time, do I need to configure samba so that it doesn't reject afp? I'm pretty new at this...

    Read the article

  • Can't get .htaccess to work

    - by orokusaki
    I'm using Apache2 on Ubuntu Lucid Lynx. I have config set to use .htaccess like normal. This is my default site: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride All Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> I've tried lower case "all" (AllowOverride all) as well. My .htaccess file looks like this: //Rewrite all requests to www Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^mydomain.com [nc] RewriteRule ^(.*)$ http://www.mydomain.com/$1 [r=301,nc] //301 Redirect "old_junk.html" File to "new_junk.html" Redirect 301 /old_junk.html /new_junk.html //301 Redirect Entire Directory "old_junk/" to "new_junk/" RedirectMatch 301 /old_junk/(.*) /new_junk//$1 // Copy and paste redirect examples from above: (with mydomain replaced with my actual domain... and my computer is plugged in)

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >