Search Results

Search found 14199 results on 568 pages for 'dirty bird design'.

Page 540/568 | < Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >

  • A Knights Tale

    - by Phil Factor
    There are so many lessons to be learned from the story of Knight Capital losing nearly half a billion dollars as a result of a deployment gone wrong. The Knight Capital Group (KCG N) was an American global financial services firm engaging in market making, electronic execution, and institutional sales and trading. According to the recent order (File No.3.15570) against Knight Capital by U.S. Securities and Exchange Commission?, Knight had, for many years used some software which broke up incoming “parent” orders into smaller “child” orders that were then transmitted to various exchanges or trading venues for execution. A tracking ‘cumulative quantity’ function counted the number of ‘child’ orders and stopped the process once the total of child orders matched the ‘parent’ and so the parent order had been completed. Back in the mists of time, some code had been added to it  which was excuted if a particular flag was set. It was called ‘power peg’ and seems to have had a similar design and purpose, but, one guesses, would have shared the same tracking function. This code had been abandoned in 2003, but never deleted. In 2005, The tracking function was moved to an earlier point in the main process. It would seem from the account that, from that point, had that flag ever been set, the old ‘Power Peg’ would have been executed like Godzilla bursting from the ice, making child orders without limit without any tracking function. It wasn’t, presumably because the software that set the flag was removed. In 2012, nearly a decade after ‘Power Peg’ was abandoned, Knight prepared a new module to their software to cope with the imminent Retail Liquidity Program (RLP) for the New York Stock Exchange. By this time, the flag had remained unused and someone made the fateful decision to reuse it, and replace the old ‘power peg’ code with this new RLP code. Had the two actions been done together in a single automated deployment, and the new deployment tested, all would have been well. It wasn’t. To quote… “Beginning on July 27, 2012, Knight deployed the new RLP code in SMARS in stages by placing it on a limited number of servers in SMARS on successive days. During the deployment of the new code, however, one of Knight’s technicians did not copy the new code to one of the eight SMARS computer servers. Knight did not have a second technician review this deployment and no one at Knight realized that the Power Peg code had not been removed from the eighth server, nor the new RLP code added. Knight had no written procedures that required such a review.” (para 15) “On August 1, Knight received orders from broker-dealers whose customers were eligible to participate in the RLP. The seven servers that received the new code processed these orders correctly. However, orders sent with the repurposed flag to the eighth server triggered the defective Power Peg code still present on that server. As a result, this server began sending child orders to certain trading centers for execution. Because the cumulative quantity function had been moved, this server continuously sent child orders, in rapid sequence, for each incoming parent order without regard to the number of share executions Knight had already received from trading centers. Although one part of Knight’s order handling system recognized that the parent orders had been filled, this information was not communicated to SMARS.” (para 16) SMARS routed millions of orders into the market over a 45-minute period, and obtained over 4 million executions in 154 stocks for more than 397 million shares. By the time that Knight stopped sending the orders, Knight had assumed a net long position in 80 stocks of approximately $3.5 billion and a net short position in 74 stocks of approximately $3.15 billion. Knight’s shares dropped more than 20% after traders saw extreme volume spikes in a number of stocks, including preferred shares of Wells Fargo (JWF) and semiconductor company Spansion (CODE). Both stocks, which see roughly 100,000 trade per day, had changed hands more than 4 million times by late morning. Ultimately, Knight lost over $460 million from this wild 45 minutes of trading. Obviously, I’m interested in all this because, at one time, I used to write trading systems for the City of London. Obviously, the US SEC is in a far better position than any of us to work out the failings of Knight’s IT department, and the report makes for painful reading. I can’t help observing, though, that even with the breathtaking mistakes all along the way, that a robust automated deployment process that was ‘all-or-nothing’, and tested from soup to nuts would have prevented the disaster. The report reads like a Greek Tragedy. All the way along one wants to shout ‘No! not that way!’ and ‘Aargh! Don’t do it!’. As the tragedy unfolds, the audience weeps for the players, trapped by a cruel fate. All application development and deployment requires defense in depth. All IT goes wrong occasionally, but if there is a culture of defensive programming throughout, the consequences are usually containable. For financial systems, these defenses are required by statute, and ignored only by the foolish. Knight’s mistakes weren’t made by just one hapless sysadmin, but were progressive errors by an  IT culture spanning at least ten years.  One can spell these out, but I think they’re obvious. One can only hope that the industry studies what happened in detail, learns from the mistakes, and draws the right conclusions.

    Read the article

  • 2D Particle Explosion

    - by TheBroodian
    I'm developing a 2D action game, and in said game I've given my primary character an ability he can use to throw a fireball. I'm trying to design an effect so that when said fireball collides (be it with terrain or with an enemy) that the fireball will explode. For the explosion effect I've created a particle that once placed into game space will follow random, yet autonomic behavior based on random variables. Here is my question: When I generate my explosion (essentially 90 of these particles) I get one of two behaviors, 1) They are all generated with the same random variables, and don't resemble an explosion at all, more like a large mass of clumped sprites that all follow the same randomly generated path. 2) If I assign each particle a unique seed to its random number generator, they are a little bit -more- spread out, yet clumping is still visible (they seem to fork out into 3 different directions) Does anybody have any tips for producing particle-based 2D explosions? I'll include the code for my particle and the event I'm generating them in. Fire particle class: public FireParticle(xTile.Dimensions.Location StartLocation, ContentManager content) { worldLocation = StartLocation; fireParticleAnimation = new FireParticleAnimation(content); random = new Random(); int rightorleft = random.Next(0, 3); int upordown = random.Next(1, 3); int xVelocity = random.Next(0, 101); int yVelocity = random.Next(0, 101); Vector2 tempVector2 = new Vector2(0,0); if (rightorleft == 1) { tempVector2 = new Vector2(xVelocity, tempVector2.Y); } else if (rightorleft == 2) { tempVector2 = new Vector2(-xVelocity, tempVector2.Y); } if (upordown == 1) { tempVector2 = new Vector2(tempVector2.X, -yVelocity); } else if (upordown == 2) { tempVector2 = new Vector2(tempVector2.X, yVelocity); } velocity = tempVector2; scale = random.Next(1, 11); upwardForce = -10; dead = false; } public FireParticle(xTile.Dimensions.Location StartLocation, ContentManager content, int seed) { worldLocation = StartLocation; fireParticleAnimation = new FireParticleAnimation(content); random = new Random(seed); int rightorleft = random.Next(0, 3); int upordown = random.Next(1, 3); int xVelocity = random.Next(0, 101); int yVelocity = random.Next(0, 101); Vector2 tempVector2 = new Vector2(0, 0); if (rightorleft == 1) { tempVector2 = new Vector2(xVelocity, tempVector2.Y); } else if (rightorleft == 2) { tempVector2 = new Vector2(-xVelocity, tempVector2.Y); } if (upordown == 1) { tempVector2 = new Vector2(tempVector2.X, -yVelocity); } else if (upordown == 2) { tempVector2 = new Vector2(tempVector2.X, yVelocity); } velocity = tempVector2; scale = random.Next(1, 11); upwardForce = -10; dead = false; } #endregion #region Update and Draw public void Update(GameTime gameTime) { elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; fireParticleAnimation.Update(gameTime); Vector2 moveAmount = velocity * elapsed; xTile.Dimensions.Location newPosition = new xTile.Dimensions.Location(worldLocation.X + (int)moveAmount.X, worldLocation.Y + (int)moveAmount.Y); worldLocation = newPosition; velocity.Y += upwardForce; if (fireParticleAnimation.finishedPlaying) { dead = true; } } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw( fireParticleAnimation.image.Image, new Rectangle((int)drawLocation.X, (int)drawLocation.Y, scale, scale), fireParticleAnimation.image.SizeAndsource, Color.White * fireParticleAnimation.image.Alpha); } Fireball explosion event: public override void Update(GameTime gameTime) { if (enabled) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; foreach (Heart_of_Fire.World_Objects.Particles.FireParticle particle in explosionParticles.ToList()) { particle.Update(gameTime); if (particle.Dead) { explosionParticles.Remove(particle); } } collisionRectangle = new Microsoft.Xna.Framework.Rectangle((int)wrldPstn.X, (int)wrldPstn.Y, 5, 5); explosionCheck = exploded; if (!exploded) { coreGraphic.Update(gameTime); tailGraphic.Update(gameTime); Vector2 moveAmount = velocity * elapsed; moveAmount = horizontalCollision(moveAmount, layer); moveAmount = verticalCollision(moveAmount, layer); Vector2 newPosition = new Vector2(wrldPstn.X + moveAmount.X, wrldPstn.Y + moveAmount.Y); if (hasCollidedHorizontally || hasCollidedVertically) { exploded = true; } wrldPstn = newPosition; worldLocation = new xTile.Dimensions.Location((int)wrldPstn.X, (int)wrldPstn.Y); } if (explosionCheck != exploded) { for (int i = 0; i < 90; i++) { explosionParticles.Add(new World_Objects.Particles.FireParticle( new Location( collisionRectangle.X + random.Next(0, 6), collisionRectangle.Y + random.Next(0, 6)), contentMgr)); } } if (exploded && explosionParticles.Count() == 0) { //enabled = false; } } }

    Read the article

  • The Best BPM Journey: More Exciting Destinations with Process Accelerators

    - by Cesare Rotundo
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Open World (OOW) earlier this month has been a great occasion to discuss with our BPM customers. It was interesting to hear definite patterns emerging from those conversations: “BPM is a journey”, “experiences to share”, “our organization now understands what BPM is”, and my favorite (with some caveats): “BPM is like wine tasting, once you start, you want to try more”. These customers have started their journey, climbed up the learning curve, and reached a vantage point that allows them to see their next BPM destination. They see the next few processes they are going to tackle and improve with BPM. These processes/destinations target both horizontal processes where BPM replaces or coordinates manual activities, and critical industry processes that the company needs to improve to compete and deliver increasing value. Each new destination generates value, allowing the organization to reduce the cost of manual processes that were not supported by apps/custom development, and increase efficiency of end-to-end processes partially covered by apps/custom dev. The question we wanted to answer is how to help organizations experience deeper success with BPM, by increasing their awareness of the potential for reaching new targets, and equipping them with the right tools. We decided that we needed to identify destinations, and plot routes to show the fastest path to those destinations. In the end we want to enable customers to reach “Process Excellence”: continuously set new targets and consistently and efficiently reach them. The result is Oracle Process Accelerators (PA), solutions built using the rich functionality in Oracle BPM Suite. PAs offers a rapidly expanding list of exciting destinations. Our launch of the latest installment of Process Accelerators at Oracle Open World includes new Industry-focused solutions such as Public Sector Incident Reporting and Financial Services Loan Origination, and improved other horizontal PAs, including Travel Request Management, Document Routing and Approval, and Internal Service Requests. Just before OOW we had extended the Oracle deployment of Travel Request Management, riding the enthusiastic response from early adopters among travelers (employees), management and support (approvers). “Getting there first” means being among the first to extract value from the PA approach, while acquiring deeper insights into the customers’ perspective. This is especially noteworthy when it comes to PAs, a set of solutions designed to be quickly deployed and iteratively improved by customers. The OOW launch has generated immediate feedback from customers, non-customers, analysts, and partners. They all confirmed that both Business and IT at organizations benefit from PAs when it comes to exploring the potential for BPM to improve their business processes. PAs help customers visualize what can be done with BPM, and PAs are made to be extended: you can see your destination, change the path to fit your needs, and deploy. We're discovering new destinations/processes that the market wants us to support, generic enough across industries and within industries. We'll keep on building sets of requirements, deliver functional design, construct solutions using Oracle BPM, and test them not only functionally but for performance, scalability, clustering, making them robust, product-quality. Delivering BPM solutions with product-grade quality is the equivalent of following a tried-and-tested path on a map. Do you know of existing destinations in your industry? If yes, we can draw a path to innovative processes together.

    Read the article

  • Proxied calls not working as expected

    - by AndyH
    I have been modifying an application to have a cleaner client/server split to allow for load splitting and resource sharing etc. Everything is written to an interface so it was easy to add a remoting layer to the interface using a proxy. Everything worked fine. The next phase was to add a caching layer to the interface and again this worked fine and speed was improved but not as much as I would have expected. On inspection it became very clear what was going on. I feel sure that this behavior has been seen many times before and there is probably a design pattern to solve the problem but it eludes me and I'm not even sure how to describe it. It is easiest explained with an example. Let's imagine the interface is interface IMyCode { List<IThing> getLots( List<String> ); IThing getOne( String id ); } The getLots() method calls getOne() and fills up the list before returning. The interface is implemented at the client which is proxied to a remoting client which then calls the remoting server which in turn calls the implementation at the server. At the client and the server layers there is also a cache. So we have :- Client interface | Client cache | Remote client | Remote server | Server cache | Server interface If we call getOne("A") at the client interface, the call is passed to the client cache which faults. This then calls the remote client which passes the call to the remote server. This then calls the server cache which also faults and so the call is eventually passed to the server interface which actually gets the IThing. In turn the server cache is filled and finally the client cache also. If getOne("A") is again called at the client interface the client cache has the data and it gets returned immediately. If a second client called getOne("B") it would fill the server cache with "B" as well as it's own client cache. Then, when the first client calls getOne("B") the client cache faults but the server cache has the data. This is all as one would expect and works well. Now lets call getLots( [ "C", "D" ] ). This works as you would expect by calling getOne() twice but there is a subtlety here. The call to getLots() cannot directly make use of the cache. Therefore the sequence is to call the client interface which in turn calls the remote client, then the remote server and eventually the server interface. This then calls getOne() to fill the list before returning. The problem is that the getOne() calls are being satisfied at the server when ideally they should be satisfied at the client. If you imagine that the client/server link is really slow then it becomes clear why the client call is more efficient than the server call once the client cache has the data. This example is contrived to illustrate the point. The more general problem is that you cannot just keep adding proxied layers to an interface and expect it to work as you would imagine. As soon as the call goes 'through' the proxy any subsequent calls are on the proxied side rather than 'self' side. Have I failed to learn or not learned something correctly? All this is implemented in Java and I haven't used EJBs. It seems that the example may be confusing. The problem is nothing to do with cache efficiencies. It is more to do with an illusion created by the use of proxies or AOP techniques in general. When you have an object whose class implements an interface there is an assumption that a call on that object might make further calls on that same object. For example, public String getInternalString() { return InetAddress.getLocalHost().toString(); } public String getString() { return getInternalString(); } If you get an object and call getString() the result depends where the code is running. If you add a remoting proxy to the class then the result could be different for calls to getString() and getInternalString() on the same object. This is because the initial call gets 'deproxied' before the actual method is called. I find this not only confusing but I wonder how I can control this behavior especially as the use of the proxy may be by a third party. The concept is fine but the practice is certainly not what I expected. Have I missed the point somewhere?

    Read the article

  • Oracle Cloud Applications: The Right Ingredients Baked In

    - by yaldahhakim
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Oracle Cloud Applications: The Right Ingredients Baked In Eggs, flour, milk, and sugar. The magic happens when you mix these ingredients together. The same goes for the hottest technologies fast changing how IT impacts our organizations today: cloud, social, mobile, and big data. By themselves they’re pretty good; combining them with a great recipe is what unlocks real transformation power. Choosing the right cloud can be very similar to choosing the right cake. First consider comparing the core ingredients that go into baking a cake and the core design principles in building a cloud-based application. For instance, if flour is the base ingredient of a cake, then rich functionality that spans complete business processes is the base of an enterprise-grade cloud. Cloud computing is more than just consuming an "application as service", and having someone else manage it for you. Rather, the value of cloud is about making your business more agile in the marketplace, and shortening the time it takes to deliver and adopt new innovation. It’s also about improving not only the efficiency at which we communicate but the actual quality of the information shared as well. Data from different systems, like ingredients in a cake, must also be blended together effectively and evaluated through a consolidated lens. When this doesn’t happen, for instance when data in your sales cloud doesn't seamlessly connect with your order management and other “back office” applications, the speed and quality of information can decrease drastically. It’s like mixing ingredients in a strainer with a straw – you just can’t bring it all together without losing something. Mixing ingredients is similar to bringing clouds together, and co-existing cloud applications with traditional on premise applications. This is where a shared services  platform built on open standards and Service Oriented Architecture (SOA) is critical. It’s essentially a cloud recipe that calls for not only great ingredients, but also ingredients you can get locally or most likely already have in your kitchen (or IT shop.) Open standards is the best way to deliver a cost effective, durable application integration strategy – regardless of where your apps are deployed. It’s also the best way to build your own cloud applications, or extend the ones you consume from a third party. Just like using standard ingredients and tools you already have in your kitchen, a standards based cloud enables your IT resources to ensure a cloud works easily with other systems. Your IT staff can also make changes using tools they are already familiar with. Or even more ideal, enable business users to actually tailor their experience without having to call upon IT for help at all. This frees IT resources to focus more on developing new innovative services for the organization vs. run and maintain. Carrying the cake analogy forward, you need to add all the ingredients in before you bake it. The same is true with a modern cloud. To harness the full power of cloud, you can’t leave out some of the most important ingredients and just layer them on top later. This is what a lot of our niche competitors have done when it comes to social, mobile, big data and analytics, and other key technologies impacting the way we do business. The transformational power of these technology trends comes from having a strategy from the get-go that combines them into a winning recipe, and delivers them in a unified way. In looking at ways Oracle’s cloud is different from other clouds – not only is breadth of functionality rich across functional pillars like CRM, HCM, ERP, etc. but it embeds social, mobile, and rich intelligence capabilities where they make the most sense across business processes. This strategy enables the Oracle Cloud to uniquely deliver on all three of these dimensions to help our customers unlock the full power of these transformational technologies.

    Read the article

  • OIM 11g - Multi Valued attribute reconciliation of a child form

    - by user604275
    This topic gives a brief description on how we can do reconciliation of a child form attribute which is also multi valued from a flat file . The format of the flat file is (an example): ManagementDomain1|Entitlement1|DIRECTORY SERVER,EMAIL ManagementDomain2|Entitlement2|EMAIL PROVIDER INSTANCE - UMS,EMAIL VERIFICATION In OIM there will be a parent form for fields Management domain and Entitlement.Reconciliation will assign Servers ( which are multi valued) to corresponding Management  Domain and Entitlement .In the flat file , multi valued fields are seperated by comma(,). In the design console, Create a form with 'Server Name' as a field and make it a child form . Open the corresponding Resource Object and add this field for reconcilitaion.While adding , choose 'Multivalued' check box. (please find attached screen shot on how to add it , Child Table.docx) Open process definiton and add child form fields for recociliation. Please click on the 'Create Reconcilitaion Profile' buttton on the resource object tab. The API methods used for child form reconciliation are : 1.           reconEventKey =   reconOpsIntf.createReconciliationEvent(resObjName, reconData,                                                            false); ·                                    ‘False’  here tells that we are creating the recon for a child table . 2.               2.       reconOpsIntf.providingAllMultiAttributeData(reconEventKey, RECON_FIELD_IN_RO, true);                RECON_FIELD_IN_RO is the field that we added in the Resource Object while adding for reconciliation, please refer the screen shot) 3.    reconOpsIntf.addDirectBulkMultiAttributeData(reconEventKey,RECON_FIELD_IN_RO, bulkChildDataMapList);                 bulkChildDataMapList  is coded as below :                 List<Map> bulkChildDataMapList = new ArrayList<Map>();                   for (int i = 0; i < stokens.length; i++) {                            Map<String, String> attributeMap = new HashMap<String, String>();                           String serverName = stokens[i].toUpperCase();                           attributeMap.put("Server Name", stokens[i]);                           bulkChildDataMapList.add(attributeMap);                         } 4                  4.       reconOpsIntf.finishReconciliationEvent(reconEventKey); 5.       reconOpsIntf.processReconciliationEvent(reconEventKey); Now, we have to register the plug-in, import metadata into MDS and then create a scheduled job to execute which will run the reconciliation.

    Read the article

  • UK OUG Conference Highlights and Insights

    - by Richard Bingham
    As per my preemptive post, this was the first time the annual conference organized by the UK Oracle User Group (UKOUG) was split into two events, one for Oracle Applications and another in December for Oracle Technology. Apps13, as it was branded, was hailed as a success, with over 1000 registered attendees and three days of sessions, exhibition, round-tables and many other types of content. As this poster on their stand illustrates, the UKOUG is a strong community with popular participants from both big and small Oracle partners and customers. The venue was a more intimate setting than previous years also, allowing everyone to casually bump into those they hoped to. It gave a real feeling of an Apps Community. The main themes over the days where CRM and Customer Experience, HCM, and FIN/SCM. This allowed people to attend just one focused day if they wanted. In addition the Apps Transformation stream ran across all three days, offering insights, advice, and details on the newer product solutions like Fusion Applications.  Here are some of the key take-aways I got from the conference, specific to my role in Fusion Applications Developer Relations: User Experience continues to be a significant reason for adopting some of the newer application products available, with immediately obvious gains in user productivity and satisfaction reported by customers. Also this doesn't stop with the baked-in UX either, with their Design Patterns proving popular and indeed currently being extended to including things like extending on ADF mobile and customizing the Simplified UI. More on this to come from us soon. The executive sessions emphasized the "it's a journey" phrase, illustrating that modern business applications are powered by technologies such as Cloud, Mobile, Social and Big Data and these can be harnessed to help propel your organization forward. Indeed the emphasis is away from the traditional vendor prescribed linear applications road map, and towards plotting a course based on business priorities supported by a broad range of integrated solutions. To help with this several conference sessions demoed the new "Applications Navigator" tool, developed in partnership with OUG members, which offers a visual framework to help organizations plan their Oracle Applications investments around business and technology imperatives. Initial reaction was positive, especially as customers do not need to decipher Oracle's huge product catalog and embeds the best blend of proven and integrated applications solutions. We'll share more on this when it is generally available. Several sessions focused around explanations and interpretation of Oracle OpenWorld 2013, helping highlight the key Oracle Applications messages and directions. With a relative small percentage of conference attendees also at OpenWorld (from a show of hands) this was a popular way to distill the information available down into specific items of interest for the community. Please note the original OpenWorld 2013 content is still available for download but will not remain available forever (via the Oracle website OpenWorld Content Catalog > pick a session > see the PDF download). With the release of E-Business Suite 12.2 the move to develop and deploy on the Fusion Middleware stack becomes a reality for many Oracle Applications customers. This coupled with recent E-Business Suite features such as the Integrated SOA Gateway and the E-Business Suite SDK for Java, illustrates how the gap between the technologies and techniques involved in extending E-Business Suite and Fusion Applications is quickly narrowing. We'll see this merging continue to evolve going forwards. Getting started with Oracle Cloud Applications is actually easier than many customers expected, with a broad selection of both large and medium sized organizations explaining how they added new features to their existing Oracle Applications portfolios. New functionality available from Fusion HCM and CX are popular extensions that do not have to disrupt those core business services. Coexistence is the buzzword here, and the available integration is also simpler than many expected, commonly involving an initial setup data load, then regularly incremental synchronizations, often without a need for real-time constant communication between systems. With much of this pre-built already the implementation process is also quite rapid. With most people dressed in suits, we wanted to get the conversations going without the traditional english reserve, so we decided to make ourselves a bit more obvious, as the photo below shows. This seemed to be quite successful and helped those interested identify and approach us. Keep a look out for similar again. In fact if you're in the UK there is an "Apps Transformation Day" planned by the UKOUG for the 19th March 2014, with more details to follow. Again something we'll be sure to participate in. I am hoping to attend the next half of the UKOUG annual conference, Tech13, that focuses more on Oracle technology and where there is more likely to be larger attendance of those interested in the lower-level aspects of applications customization and development. If you're going, let me know and maybe we can meet up.

    Read the article

  • Navigation in a #WP7 application with MVVM Light

    - by Laurent Bugnion
    In MVVM applications, it can be a bit of a challenge to send instructions to the view (for example a page) from a viewmodel. Thankfully, we have good tools at our disposal to help with that. In his excellent series “MVVM Light Toolkit soup to nuts”, Jesse Liberty proposes one approach using the MVVM Light messaging infrastructure. While this works fine, I would like to show here another approach using what I call a “view service”, i.e. an abstracted service that is invoked from the viewmodel, and implemented on the view. Multiple kinds of view services In fact, I use view services quite often, and even started standardizing them for the Windows Phone 7 applications I work on. If there is interest, I will be happy to show other such view services, for example Animation services, responsible to start/stop animations on the view. Dialog service, in charge of displaying messages to the user and gathering feedback. Navigation service, in charge of navigating to a given page directly from the viewmodel. In this article, I will concentrate on the navigation service. The INavigationService interface In most WP7 apps, the navigation service is used in quite a straightforward way. We want to: Navigate to a given URI. Go back. Be notified when a navigation is taking place, and be able to cancel. The INavigationService interface is quite simple indeed: public interface INavigationService { event NavigatingCancelEventHandler Navigating; void NavigateTo(Uri pageUri); void GoBack(); } Obviously, this interface can be extended if necessary, but in most of the apps I worked on, I found that this covers my needs. The NavigationService class It is possible to nicely pack the navigation service into its own class. To do this, we need to remember that all the PhoneApplicationPage instances use the same instance of the navigation service, exposed through their NavigationService property. In fact, in a WP7 application, it is the main frame (RootFrame, of type PhoneApplicationFrame) that is responsible for this task. So, our implementation of the NavigationService class can leverage this. First the class will grab the PhoneApplicationFrame and store a reference to it. Also, it registers a handler for the Navigating event, and forwards the event to the listening viewmodels (if any). Then, the NavigateTo and the GoBack methods are implemented. They are quite simple, because they are in fact just a gateway to the PhoneApplicationFrame. The whole class is as follows: public class NavigationService : INavigationService { private PhoneApplicationFrame _mainFrame; public event NavigatingCancelEventHandler Navigating; public void NavigateTo(Uri pageUri) { if (EnsureMainFrame()) { _mainFrame.Navigate(pageUri); } } public void GoBack() { if (EnsureMainFrame() && _mainFrame.CanGoBack) { _mainFrame.GoBack(); } } private bool EnsureMainFrame() { if (_mainFrame != null) { return true; } _mainFrame = Application.Current.RootVisual as PhoneApplicationFrame; if (_mainFrame != null) { // Could be null if the app runs inside a design tool _mainFrame.Navigating += (s, e) => { if (Navigating != null) { Navigating(s, e); } }; return true; } return false; } } Exposing URIs I find that it is a good practice to expose each page’s URI as a constant. In MVVM Light applications, a good place to do that is the ViewModelLocator, which already acts like a central point of setup for the views and their viewmodels. Note that in some cases, it is necessary to expose the URL as a string, for instance when a query string needs to be passed to the view. So for example we could have: public static readonly Uri MainPageUri = new Uri("/MainPage.xaml", UriKind.Relative); public const string AnotherPageUrl = "/AnotherPage.xaml?param1={0}&param2={1}"; Creating and using the NavigationService Normally, we only need one instance of the NavigationService class. In cases where you use an IOC container, it is easy to simply register a singleton instance. For example, I am using a modified version of a super simple IOC container, and so I can register the navigation service as follows: SimpleIoc.Register<INavigationService, NavigationService>(); Then, it can be resolved where needed with: SimpleIoc.Resolve<INavigationService>(); Or (more frequently), I simply declare a parameter on the viewmodel constructor of type INavigationService and let the IOC container do its magic and inject the instance of the NavigationService when the viewmodel is created. On supported platforms (for example Silverlight 4), it is also possible to use MEF. Or, of course, we can simply instantiate the NavigationService in the ViewModelLocator, and pass this instance as a parameter of the viewmodels’ constructor, injected as a property, etc… Once the instance has been passed to the viewmodel, it can be used, for example with: NavigationService.NavigateTo(ViewModelLocator.ComparisonPageUri); Testing Thanks to the INavigationService interface, navigation can be mocked and tested when the viewmodel is put under unit test. Simply implement and inject a mock class, and assert that the methods are called as they should by the viewmodel. Conclusion As usual, there are multiple ways to code a solution answering your needs. I find that view services are a really neat way to delegate view-specific responsibilities such as animation, dialogs and of course navigation to other classes through an abstracted interface. In some cases, such as the NavigationService class exposed here, it is even possible to standardize the implementation and pack it in a class library for reuse. I hope that this sample is useful! Happy coding. Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • Collaborative Whiteboard using WebSocket in GlassFish 4 - Text/JSON and Binary/ArrayBuffer Data Transfer (TOTD #189)

    - by arungupta
    This blog has published a few blogs on using JSR 356 Reference Implementation (Tyrus) as its integrated in GlassFish 4 promoted builds. TOTD #183: Getting Started with WebSocket in GlassFish TOTD #184: Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark TOTD #185: Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket TOTD #186: Custom Text and Binary Payloads using WebSocket One of the typical usecase for WebSocket is online collaborative games. This Tip Of The Day (TOTD) explains a sample that can be used to build such games easily. The application is a collaborative whiteboard where different shapes can be drawn in multiple colors. The shapes drawn on one browser are automatically drawn on all other peer browsers that are connected to the same endpoint. The shape, color, and coordinates of the image are transfered using a JSON structure. A browser may opt-out of sharing the figures. Alternatively any browser can send a snapshot of their existing whiteboard to all other browsers. Take a look at this video to understand how the application work and the underlying code. The complete sample code can be downloaded here. The code behind the application is also explained below. The web page (index.jsp) has a HTML5 Canvas as shown: <canvas id="myCanvas" width="150" height="150" style="border:1px solid #000000;"></canvas> And some radio buttons to choose the color and shape. By default, the shape, color, and coordinates of any figure drawn on the canvas are put in a JSON structure and sent as a message to the WebSocket endpoint. The JSON structure looks like: { "shape": "square", "color": "#FF0000", "coords": { "x": 31.59999942779541, "y": 49.91999053955078 }} The endpoint definition looks like: @WebSocketEndpoint(value = "websocket",encoders = {FigureDecoderEncoder.class},decoders = {FigureDecoderEncoder.class})public class Whiteboard { As you can see, the endpoint has decoder and encoder registered that decodes JSON to a Figure (a POJO class) and vice versa respectively. The decode method looks like: public Figure decode(String string) throws DecodeException { try { JSONObject jsonObject = new JSONObject(string); return new Figure(jsonObject); } catch (JSONException ex) { throw new DecodeException("Error parsing JSON", ex.getMessage(), ex.fillInStackTrace()); }} And the encode method looks like: public String encode(Figure figure) throws EncodeException { return figure.getJson().toString();} FigureDecoderEncoder implements both decoder and encoder functionality but thats purely for convenience. But the recommended design pattern is to keep them in separate classes. In certain cases, you may even need only one of them. On the client-side, the Canvas is initialized as: var canvas = document.getElementById("myCanvas");var context = canvas.getContext("2d");canvas.addEventListener("click", defineImage, false); The defineImage method constructs the JSON structure as shown above and sends it to the endpoint using websocket.send(). An instant snapshot of the canvas is sent using binary transfer with WebSocket. The WebSocket is initialized as: var wsUri = "ws://localhost:8080/whiteboard/websocket";var websocket = new WebSocket(wsUri);websocket.binaryType = "arraybuffer"; The important part is to set the binaryType property of WebSocket to arraybuffer. This ensures that any binary transfers using WebSocket are done using ArrayBuffer as the default type seem to be blob. The actual binary data transfer is done using the following: var image = context.getImageData(0, 0, canvas.width, canvas.height);var buffer = new ArrayBuffer(image.data.length);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = image.data[i];}websocket.send(bytes); This comprehensive sample shows the following features of JSR 356 API: Annotation-driven endpoints Send/receive text and binary payload in WebSocket Encoders/decoders for custom text payload In addition, it also shows how images can be captured and drawn using HTML5 Canvas in a JSP. How could this be turned in to an online game ? Imagine drawing a Tic-tac-toe board on the canvas with two players playing and others watching. Then you can build access rights and controls within the application itself. Instead of sending a snapshot of the canvas on demand, a new peer joining the game could be automatically transferred the current state as well. Do you want to build this game ? I built a similar game a few years ago. Do somebody want to rewrite the game using WebSocket APIs ? :-) Many thanks to Jitu and Akshay for helping through the WebSocket internals! Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

    Read the article

  • Windows 8/Surface Lunch Event Summary

    - by Tim Murphy
    Today was a big day for Microsoft with two separate launch event.  The first for Windows 8 and all of it’s hardware partners.  The second was specifically to introduce the Microsoft Windows 8 Surface tablet.  Below are some of the take-aways I got from the webcasts. Windows 8 Launch The three general area that Microsoft focused on were the release of the OS itself, the public unveiling of the Windows Store and the new devices available from its hardware partners. The release of the OS focused on the fact that it will be available at mid-night tonight for both new PCs and for upgrades.  I can’t say that this interested me that much since it was already known to most people.  I think what they did show well was how easy the OS really is to use. The Windows Store is also not a new feature to those of us who have been running the pre-release versions of Windows 8 or have owned Windows Phone 7 for the past 2 years.  What was interesting is that the Windows Store launches with more apps available than any other platforms store at their respective launch.  I think this says a lot about how Microsoft focuses on the ability of developers to create software and make it available.  The of course were sure to emphasize that the Windows Store has better monetary terms for developers than its competitors. The also showed off the fact that XBox Music streaming is available for to all Windows 8 user for free.  Couple this with the Bing suite of apps that give you news, weather, sports and finance right out of the box and I think most people will find the environment a joy to use. I think the hardware demo, while quick and furious, really show where Windows shine: CHOICE!  They made a statement that over 1000 devices have been certified for Windows 8.  They showed tablets, laptops, desktops, all-in-ones and convertibles.  Since these devices have industry standard connectors they give a much wider variety of accessories and devices that you can use with them. Steve Balmer then came on stage and tried to see how many times he could use the “magical”.  He focused on how the Windows 8 OS is designed to integrate with SkyDrive, Skype and Outlook.com.  He also enforced that they think Windows 8 is the best choice for the Enterprise when it comes to protecting data and integrating across devices including Windows Phone 8. With that we were left to wait for the second event of the day. Surface Launch The second event of the day started with kids with magnets.  Ok, they were adults, but who doesn’t like playing with magnets.  Steven Sinofsky detached and reattached the Surface keyboard repeatedly, clearly enjoying himself.  It turns out that there are 4 magnets in the cover, 2 for alignment and 2 as connectors. They then went to giving us the details on the display.  The 10.6” display is optically bonded to the case and is optimized to reduce glare.  I think this came through very well in the demonstrations. The properties of the case were also a great selling point.  The VaporMg allowed them to drop the device on stage, on purpose, and continue working.  Of course they had to bring out the skate boards made from Surface devices. “It just has to feel right” was the reason they gave for many of their design decisions from the weight and size of the device to the way the kickstand and camera work together.  While this gave you the feeling that the whole process was trial and error you could tell that a lot of science went into the specs.  This included making sure that the magnets were strong enough to hold the cover on and still have a 3 year old remove the cover without effort. I am glad that they also decided the a USB port would be part of the spec since it give so many options.  They made the point that this allows Surface to leverage over 420 million existing devices.  That works for me. The last feature that I really thought was important was the microSD port.  Begin stuck with the onboard memory has been an aggravation of mine with many of the devices in the market today. I think they did job of really getting the audience to understand why you want this platform and this particular device.  Using personal examples like creating a video of a birthday party and being in it or the fact that the device was being used to live blog the event and control the lights and presentation.  They showed very well that it was not only fun but very capable of getting real work done.  Handing out tablets to the crowd didn’t hurt either.  In the end I really wanted a Surface even though I really have no need for one on a daily basis.  Great job Microsoft! del.icio.us Tags: Windows 8,Win8,Windows 8 Luanch

    Read the article

  • Deduping your redundancies

    - by nospam(at)example.com (Joerg Moellenkamp)
    Robin Harris of Storagemojo pointed to an interesting article about about deduplication and it's impact to the resiliency of your data against data corruption on ACM Queue. The problem in short: A considerable number of filesystems store important metadata at multiple locations. For example the ZFS rootblock is copied to three locations. Other filesystems have similar provisions to protect their metadata. However you can easily proof, that the rootblock pointer in the uberblock of ZFS for example is pointing to blocks with absolutely equal content in all three locatition (with zdb -uu and zdb -r). It has to be that way, because they are protected by the same checksum. A number of devices offer block level dedup, either as an option or as part of their inner workings. However when you store three identical blocks on them and the devices does block level dedup internally, the device may just deduplicated your redundant metadata to a block stored just once that is stored on the non-voilatile storage. When this block is corrupted, you have essentially three corrupted copies. Three hit with one bullet. This is indeed an interesting problem: A device doing deduplication doesn't know if a block is important or just a datablock. This is the reason why I like deduplication like it's done in ZFS. It's an integrated part and so important parts don't get deduplicated away. A disk accessed by a block level interface doesn't know anything about the importance of a block. A metadata block is nothing different to it's inner mechanism than a normal data block because there is no way to tell that this is important and that those redundancies aren't allowed to fall prey to some clever deduplication mechanism. Robin talks about this in regard of the Sandforce disk controllers who use a kind of dedup to reduce some of the nasty effects of writing data to flash, but the problem is much broader. However this is relevant whenever you are using a device with block level deduplication. It's just the point that you have to activate it for most implementation by command, whereas certain devices do this by default or by design and you don't know about it. However I'm not perfectly sure about that ? given that storage administration and server administration are often different groups with different business objectives I would ask your storage guys if they have activated dedup without telling somebody elase on their boxes in order to speak less often with the storage sales rep. The problem is even more interesting with ZFS. You may use ditto blocks to protect important data to store multiple copies of data in the pool to increase redundancy, even when your pool just consists out of one disk or just a striped set of disk. However when your device is doing dedup internally it may remove your redundancy before it hits the nonvolatile storage. You've won nothing. Just spend your disk quota on the the LUNs in the SAN and you make your disk admin happy because of the good dedup ratio However you can just fall in this specific "deduped ditto block"trap when your pool just consists out of a single device, because ZFS writes ditto blocks on different disks, when there is more than just one disk. Yet another reason why you should spend some extra-thought when putting your zpool on a single LUN, especially when the LUN is sliced and dices out of a large heap of storage devices by a storage controller. However I have one problem with the articles and their specific mention of ZFS: You can just hit by this problem when you are using the deduplicating device for the pool. However in the specifically mentioned case of SSD this isn't the usecase. Most implementations of SSD in conjunction with ZFS are hybrid storage pools and so rotating rust disk is used as pool and SSD are used as L2ARC/sZIL. And there it simply doesn't matter: When you really have to resort to the sZIL (your system went down, it doesn't matter of one block or several blocks are corrupt, you have to fail back to the last known good transaction group the device. On the other side, when a block in L2ARC is corrupt, you simply read it from the pool and in HSP implementations this is the already mentioned rust. In conjunction with ZFS this is more interesting when using a storage array, that is capable to do dedup and where you use LUNs for your pool. However as mentioned before, on those devices it's a user made decision to do so, and so it's less probable that you deduplicating your redundancies. Other filesystems lacking acapability similar to hybrid storage pools are more "haunted" by this problem of SSD using dedup-like mechanisms internally, because those filesystem really store the data on the the SSD instead of using it just as accelerating devices. However at the end Robin is correct: It's jet another point why protecting your data by creating redundancies by dispersing it several disks (by mirror or parity RAIDs) is really important. No dedup mechanism inside a device can dedup away your redundancy when you write it to a totally different and indepenent device.

    Read the article

  • If I were in a Silverlight focus group, here is ten things I would say.

    - by mbcrump
    Silverlight is a great product right off the shelf. I use it, love it and spend a lot of time helping the community understand it. This however, doesn’t mean that I don’t think that it can get better. If I were invited to a Microsoft Focus Group about Silverlight here is 10 things I would say:  We need more navigation templates. I’ve found (4) templates that Microsoft has released (Cosmo, Windows 7, Accent and JetPack). This number needs to be around 16. In order to get more people developing for Silverlight, we need to give them a variety of templates to get them off the ground quickly. Silverlight needs to ship with the next version of Windows. At least version 4 needs to be pre-installed on Windows going forward. It’s small, in its own sandbox and I cannot find a reason for it not to be included. Silverlight needs to run on more platforms.  iOS and Android are the key here. I think Microsoft should shoot for Android first since I believe Android will take the lead in the mobile market (at least for the short-term). It would also be great to see Microsoft use Silverlight as the focus on their new tablets / “AppleTV”. I would even invest in getting it working with Kinect. When creating a new project in Silverlight, we should have the option to create a Unit Test. Most Silverlight developers are not unit testing. If this is surprising to you then you need to get out and talk to more developers. I partially blame this on Microsoft. When you create a new ASP.NET MVC application, you simply put a check to create a Unit Test project. We need the same thing for Silverlight. We should steer the developer into the right direction. Design patterns such as MVVM need to be easier to implement in Silverlight solutions.  I’d go so far as to say that MVVM Light should ship with Visual Studio. With the project / item templates and code snippets, Laurent puts you into the right direction. This is the way that it should have been. Easy for the 9-5 developer to grasp. I believe the majority of developers use code behind because that’s what is in all the demos provided by Microsoft. They are not trying to write sucky code it is that they simply don’t know a better way.  The XAP Files should be obfuscated/unused references deleted by default when in “Release” mode. A better Silverlight experience starts with a smaller XAP file. The less that a user has to download is the better, even with the majority of people on broadband. I would also recommend built-in obfuscation by Microsoft. People are paranoid that they can rename the .zip and run it through reflector. Get rid of the boring install experiences. Here is a great write up on what I’m talking about. The default “Install Silverlight” and “Loading screens” suck. They suck bad. We need a choice of templates that a professional designer has created.  Silverlight needs to supports more image formats. For example: it would be great to use .gif’s without converting them to .png.    Switching between Blend 4 and VS2010 to develop a Silverlight application is a pain. Probably one of the biggest issues that I can’t think of a good solution for. It would be nice if VS2012 had the best of both worlds and you never have to leave VS. We need reporting controls with SSRS included with the Silverlight Toolkit. I can’t think of another control that we need built into the toolkit. It would also be helpful to have export to .xls, .pdf and .doc included with the control. I hope that this post will at least get a few people talking. Who knows, Microsoft could be working on these things right now. Thanks for reading!  Subscribe to my feed CodeProject

    Read the article

  • Part 4 of 4 : Tips/Tricks for Silverlight Developers.

    - by mbcrump
    Part 1 | Part 2 | Part 3 | Part 4 I wanted to create a series of blog post that gets right to the point and is aimed specifically at Silverlight Developers. The most important things I want this series to answer is : What is it?  Why do I care? How do I do it? I hope that you enjoy this series. Let’s get started: Tip/Trick #16) What is it? Find out version information about Silverlight and which WebKit it is using by going to http://issilverlightinstalled.com/scriptverify/. Why do I care? I’ve had those users that its just easier to give them a site and say copy/paste the line that says User Agent in order to troubleshoot a Silverlight problem. I’ve also been debugging my own Silverlight applications and needed an easy way to determine if the plugin is disabled or not. How do I do it: Simply navigate to http://issilverlightinstalled.com/scriptverify/ and hit the Verify button. An example screenshot is located below: Results from Chrome 7 Results from Internet Explorer 8 (With Silverlight Disabled) Tip/Trick #17) What is it? Use Lambdas whenever you can. Why do I care?  It is my personal opinion that code is easier to read using Lambdas after you get past the syntax. How do I do it: For example: You may write code like the following: void MainPage_Loaded(object sender, RoutedEventArgs e) { //Check and see if we have a newer .XAP file on the server Application.Current.CheckAndDownloadUpdateAsync(); Application.Current.CheckAndDownloadUpdateCompleted += new CheckAndDownloadUpdateCompletedEventHandler(Current_CheckAndDownloadUpdateCompleted); } void Current_CheckAndDownloadUpdateCompleted(object sender, CheckAndDownloadUpdateCompletedEventArgs e) { if (e.UpdateAvailable) { MessageBox.Show( "An update has been installed. To see the updates please exit and restart the application"); } } To me this style forces me to look for the other Method to see what the code is actually doing. The style located below is much easier to read in my opinion and does the exact same thing. void MainPage_Loaded(object sender, RoutedEventArgs e) { //Check and see if we have a newer .XAP file on the server Application.Current.CheckAndDownloadUpdateAsync(); Application.Current.CheckAndDownloadUpdateCompleted += (s, e) => { if (e.UpdateAvailable) { MessageBox.Show( "An update has been installed. To see the updates please exit and restart the application"); } }; } Tip/Trick #18) What is it? Prevent development Web Service references from breaking when Visual Studio auto generates a new port number. Why do I care?  We have all been there, we are developing a Silverlight Application and all of a sudden our development web services break. We check and find out that the local port number that Visual Studio assigned has changed and now we need up to update all of our service references. We need a way to stop this. How do I do it: This can actually be prevented with just a few mouse click. Right click on your web solution and goto properties. Click the tab that says, Web. You just need to click the radio button and specify a port number. Now you won’t be bothered with that anymore. Tip/Trick #19) What is it? You can disable the Close Button a ChildWindow. Why do I care?  I wouldn’t blog about it if I hadn’t seen it. Devs trying to override keystrokes to prevent users from closing a Child Window. How do I do it: A property exist on the ChildWindow called “HasCloseButton”, you simply change that to false and your close button is gone. You can delete the “Cancel” button and add some logic to the OK button if you want the user to respond before proceeding. Tip/Trick #20) What is it? Cleanup your XAML. Why do I care?  By removing unneeded namespaces, not naming all of your controls and getting rid of designer markup you can improve code quality and readability. How do I do it: (This is a 3 in one tip) Remove unused Designer markup: 1) Have you ever wondered what the following code snippet does? xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480" This code is telling the designer to do something special with this page in “Design mode” Specifically the width and the height of the page. When its running in the browser it will not use this information and it is actually ignored by the XAML parser. In other words, if you don’t need it then delete it. 2) If you are not using a namespace then remove it. In the code sample below, I am using Resharper which will tell me the ones that I’m not using by the grayed out line below. If you don’t have resharper you can look in your XAML and manually remove the unneeded namespaces. 3) Don’t name an control unless you actually need to refer to it in procedural code. If you name a control you will take a slight performance hit that is totally unnecessary if its not being called. <TextBlock Height="23" Text="TextBlock" />   That is the end of the series. I hope that you enjoyed it and please check out Part 1 | Part 2 | Part 3 if your hungry for more.  Subscribe to my feed CodeProject

    Read the article

  • Viewing the NetBeans Central Registry (Part 2)

    - by Geertjan
    Jens Hofschröer, who has one of the very best NetBeans Platform blogs (if you more or less understand German), and who wrote, sometime ago, the initial version of the Import Statement Organizer, as well as being the main developer of a great gear design & manufacturing tool on the NetBeans Platform in Aachen, commented on my recent blog entry "Viewing the NetBeans Central Registry", where the root Node of the Central Registry is shown in a BeanTreeView, with the words: "I wrapped that Node in a FilterNode to provide the 'position' attribute and the 'file extension'. All Children are wrapped too. Then I used an OutlineView to show these two properties. Great tool to find wrong layer entries." I asked him for the code he describes above and he sent it to me. He discussed it here in his blog, while all the code involved can be read below. The result is as follows, where you can see that the OutlineView shows information that my simple implementation (via a BeanTreeView) kept hidden: And so here is the definition of the Node. class LayerPropertiesNode extends FilterNode { public LayerPropertiesNode(Node node) { super(node, isFolder(node) ? Children.create(new LayerPropertiesFactory(node), true) : Children.LEAF); } private static boolean isFolder(Node node) { return null != node.getLookup().lookup(DataFolder.class); } @Override public String getDisplayName() { return getLookup().lookup(FileObject.class).getName(); } @Override public Image getIcon(int type) { FileObject fo = getLookup().lookup(FileObject.class); try { DataObject data = DataObject.find(fo); return data.getNodeDelegate().getIcon(type); } catch (DataObjectNotFoundException ex) { Exceptions.printStackTrace(ex); } return super.getIcon(type); } @Override public Image getOpenedIcon(int type) { return getIcon(type); } @Override public PropertySet[] getPropertySets() { Set set = Sheet.createPropertiesSet(); set.put(new PropertySupport.ReadOnly<Integer>( "position", Integer.class, "Position", null) { @Override public Integer getValue() throws IllegalAccessException, InvocationTargetException { FileObject fileEntry = getLookup().lookup(FileObject.class); Integer posValue = (Integer) fileEntry.getAttribute("position"); return posValue != null ? posValue : Integer.valueOf(0); } }); set.put(new PropertySupport.ReadOnly<String>( "ext", String.class, "Extension", null) { @Override public String getValue() throws IllegalAccessException, InvocationTargetException { FileObject fileEntry = getLookup().lookup(FileObject.class); return fileEntry.getExt(); } }); PropertySet[] original = super.getPropertySets(); PropertySet[] withLayer = new PropertySet[original.length + 1]; System.arraycopy(original, 0, withLayer, 0, original.length); withLayer[withLayer.length - 1] = set; return withLayer; } private static class LayerPropertiesFactory extends ChildFactory<FileObject> { private final Node context; public LayerPropertiesFactory(Node context) { this.context = context; } @Override protected boolean createKeys(List<FileObject> list) { FileObject folder = context.getLookup().lookup(FileObject.class); FileObject[] children = folder.getChildren(); List<FileObject> ordered = FileUtil.getOrder(Arrays.asList(children), false); list.addAll(ordered); return true; } @Override protected Node createNodeForKey(FileObject key) { AbstractNode node = new AbstractNode(org.openide.nodes.Children.LEAF, key.isFolder() ? Lookups.fixed(key, DataFolder.findFolder(key)) : Lookups.singleton(key)); return new LayerPropertiesNode(node); } } } Then here is the definition of the Action, which pops up a JPanel, displaying an OutlineView: @ActionID(category = "Tools", id = "de.nigjo.nb.layerview.LayerViewAction") @ActionRegistration(displayName = "#CTL_LayerViewAction") @ActionReferences({ @ActionReference(path = "Menu/Tools", position = 1450, separatorBefore = 1425) }) @Messages("CTL_LayerViewAction=Display XML Layer") public final class LayerViewAction implements ActionListener { @Override public void actionPerformed(ActionEvent e) { try { Node node = DataObject.find(FileUtil.getConfigRoot()).getNodeDelegate(); node = new LayerPropertiesNode(node); node = new FilterNode(node) { @Override public Component getCustomizer() { LayerView view = new LayerView(); view.getExplorerManager().setRootContext(this); return view; } @Override public boolean hasCustomizer() { return true; } }; NodeOperation.getDefault().customize(node); } catch (DataObjectNotFoundException ex) { Exceptions.printStackTrace(ex); } } private static class LayerView extends JPanel implements ExplorerManager.Provider { private final ExplorerManager em; public LayerView() { super(new BorderLayout()); em = new ExplorerManager(); OutlineView view = new OutlineView("entry"); view.addPropertyColumn("position", "Position"); view.addPropertyColumn("ext", "Extension"); add(view); } @Override public ExplorerManager getExplorerManager() { return em; } } }

    Read the article

  • What are some concise and comprehensive introductory guide to unit testing for a self-taught programmer [closed]

    - by Superbest
    I don't have much formal training in programming and I have learned most things by looking up solutions on the internet to practical problems I have. There are some areas which I think would be valuable to learn, but which ended up both being difficult to learn and easy to avoid learning for a self-taught programmer. Unit testing is one of them. Specifically, I am interested in tests in and for C#/.NET applications using Microsoft.VisualStudio.TestTools in Visual Studio 2010 and/or 2012, but I really want a good introduction to the principles so language and IDE shouldn't matter much. At this time I'm interested in relatively trivial tests for small or medium sized programs (development time of weeks or months and mostly just myself developing). I don't necessarily intend to do test-driven development (I am aware that some say unit testing alone is supposed to be for developing features in TDD, and not an assurance that there are no bugs in the software, but unit testing is often the only kind of testing for which I have resources). I have found this tutorial which I feel gave me a decent idea of what unit tests and TDD looks like, but in trying to apply these ideas to my own projects, I often get confused by questions I can't answer and don't know how to answer, such as: What parts of my application and what sorts of things aren't necessarily worth testing? How fine grained should my tests be? Should they test every method and property separately, or work with a larger scope? What is a good naming convention for test methods? (since apparently the name of the method is the only way I will be able to tell from a glance at the test results table what works in my program and what doesn't) Is it bad to have many asserts in one test method? Since apparently VS2012 reports only that "an Assert.IsTrue failed within method MyTestMethod", and if MyTestMethod has 10 Assert.IsTrue statements, it will be irritating to figure out why a test is failing. If a lot of the functionality deals with writing and reading data to/from the disk in a not-exactly trivial fashion, how do I test that? If I provide a bunch of files as input by placing them in the program's directory, do I have to copy those files to the test project's bin/Debug folder now? If my program works with a large body of data and execution takes minutes or more, should my tests have it do the whole use all of the real data, a subset of it, or simulated data? If latter, how do I decide on the subset or how to simulate? Closely related to the previous point, if a class is such that its main operation happens in a state that is arrived to by the program after some involved operations (say, a class makes calculations on data derived from a few thousands of lines of code analyzing some raw data) how do I test just that class without inevitably ending up testing that class and all the other code that brings it to that state along with it? In general, what kind of approach should I use for test initialization? (hopefully that is the correct term, I mean preparing classes for testing by filling them in with appropriate data) How do I deal with private members? Do I just suck it up and assume that "not public = shouldn't be tested"? I have seen people suggest using private accessors and reflection, but these feel like clumsy and unsuited for regular use. Are these even good ideas? Is there anything like design patterns concerning testing specifically? I guess the main themes in what I'd like to learn more about are, (1) what are the overarching principles that should be followed (or at least considered) in every testing effort and (2) what are popular rules of thumb for writing tests. For example, at one point I recall hearing from someone that if a method is longer than 200 lines, it should be refactored - not a universally correct rule, but it has been quite helpful since I'd otherwise happily put hundreds of lines in single methods and then wonder why my code is so hard to read. Similarly I've found ReSharpers suggestions on member naming style and other things to be quite helpful in keeping my codebases sane. I see many resources both online and in print that talk about testing in the context of large applications (years of work, 10s of people or more). However, because I've never worked on such large projects, this context is very unfamiliar to me and makes the material difficult to follow and relate to my real world problems. Speaking of software development in general, advice given with the assumptions of large projects isn't always straightforward to apply to my own, smaller endeavors. Summary So my question is: What are some resources to learn about unit testing, for a hobbyist, self-taught programmer without much formal training? Ideally, I'm looking for a short and simple "bible of unit testing" which I can commit to memory, and then apply systematically by repeatedly asking myself "is this test following the bible of testing closely enough?" and then amending discrepancies if it doesn't.

    Read the article

  • The architecture and technologies to use for a secure, fast, reliable and easily scalable web application

    - by DSoul
    ^ For actual questions, skip to the lists down below I understand, that his is a vague topic, but please, before you turn the other way and disregard me, hear me out. I am currently doing research for a web application(I don't know if application is the correct word for it, but I will proceed w/ that for now), that one day might need to be everything mentioned in the title. I am bound by nothing. That means that every language, OS and framework is acceptable, but only if it proves it's usefulness. And if you are going to say, that scalability and speed depend on the code I write for this application, then I agree, but I am just trying to find something, that wouldn't stand in my way later on. I have done quite a bit reading on this subject, but I still don't have a clear picture, to what suits my needs, so I come to you, StackOverflow, to give me directions. I know you all must be wondering what I'm building, but I assure you, that it doesn't matter. I have heard of 12 factor app though, if you have any similar guidelines or what is, to suggest the please, go ahead. For the sake of keeping your answers as open as possible, I'm not gonna provide you my experience regarding anything written in this question. ^ Skippers, start here First off - the weights of the requirements are probably something like that (on a scale of 10): Security - 10 Speed - 5 Reliability (concurrency) - 7.5 Scalability - 10 Speed and concurrency are not a top priority, in the sense, that the program can be CPU intensive, and therefore slow, and only accept a not-that-high number of concurrent users, but both of these factors must be improvable by scaling the system Anyway, here are my questions: How many layers should the application have, so it would be future-proof and could best fulfill the aforementioned requirements? For now, what I have in mind is the most common version: Completely separated front end, that might be a web page or an MMI application or even both. Some middle-ware handling communication between the front and the back end. This is probably a server that communicates w/ the front end via HTTP. How the communication w/ the back end should be handled is probably dependent on the back end. The back end. Something that handles data through resources like DB and etc. and does various computations w/ the data. This, as the highest priority part of the software, must be easily spread to multiple computers later on and have no known security holes. I think ideally the middle-ware should send a request to a queue from where one of the back end processes takes this request, chops it up to smaller parts and buts these parts of the request back onto the same queue as the initial request, after what these parts will be then handled by other back end processes. Something *map-reduce*y, so to say. What frameworks, languages and etc. should these layers use? The technologies used here are not that important at this moment, you can ignore this part for now I've been pointed to node.js for this part. Do you guys know any better alternatives, or have any reasons why I should (not) use node.js for this particular job. I actually have no good idea, what to use for this job, there are too many options out there, so please direct me. This part (and the 2. one also, I think) depend a lot on the OS, so suggest any OSs alongside w/ the technologies/frameworks. Initially, all computers (or 1 for starters) hosting the back end are going to be virtual machines. Please do give suggestions to any part of the question, that you feel you have comprehensive knowledge and/or experience of. And also, point out if you feel that any part of the current set-up means an instant (or even distant) failure or if I missed a very important aspect to consider. I'm not looking for a definitive answer for how to achieve my goals, because there certainly isn't one, for I haven't provided you w/ all the required information. I'm just looking for recommendations and directions on what to look into. Also, bare in mind, that this isn't something that I have to get done quickly, to sell and let it be re-written by the new owner (which, I've been told for multiple times, is what I should aim for). I have all the time in the world and I really just want to learn doing something really high-end. Also, excuse me if my language isn't the best, I'm not a native. Anyway. Thanks in advance to anyone, who takes the time to help me out here. PS. When I do seem to come up w/ a good architecture/design for this project, I will certainly make it an open project and keep you guys up to date w/ it's development. As in what you could have told me earlier and etc. For obvious reasons the very same question got closed on SO, but could you guys still help me?.

    Read the article

  • Spring??Java EE 6?! ???????????????·????????Java Developers Workshop 2012 Summer????

    - by ???02
    ?Java EE 6??????????????????????????????????????/?????????????????????????Spring Framework?????????????????????????????????????????????????????????????????????????????? “Spring to Java EE 6”????·????????????????????Java EE 6????????????????????IT???????????????Java??????????????·???????????????8???????Java Developers Workshop 2012 Summer????????????????Best Practices for Migrating Spring to Java EE 6???????????????(???) ???????????????Spring Framework??Java EE 6???? ?????IT??????????????????·?????????????????? “Spring to Java EE 6”?????????????????????????????????????????????????????????????????????? ???????????Java?????????????????????????????????Java??????????????????????????????????????????????????100??Java??????????????????????????????????? ???????Java?????????????????1??????????·??????????????Java?????????????????????????????Java???????????????????·??????????????????·????????????Java????????????????????????????Java??????????????????????????????? ??????????????????????????????????????????????????Spring??Java EE 6??????????·???????Spring????????????????????Java EE 6?????????????????????????????????????????????????????Java EE 6??????????????????? 8???????Java Developers Workshop 2012 Summer??????????Java??????????????????????????????????Best Practices for Migrating Spring to Java EE 6??????????“Spring to Java EE 6”????????????????????????????“Spring to Java EE 6”??????????????????? Java??????????“Spring to Java EE 6”????·?????? ?????Spring??Java EE????????????????????????????????????????? Spring????????·?????????????J2EE Design and Development?????J2EE 1.4??????????????????????????Spring ?????????????????????????????? ???Spring???8?????????????????????????????????????Java EE?????????????????????????????????????????????????? ???????Java EE??????????????????????????Java EE??????????????????????????????????????????????????????????????????????????????????Spring????????Java EE 6???????????????????????????? ???????????????????????????????Java EE?Spring?????????????????????????????????????????Spring??Java EE 6???????????????????????????????? ?????“??”Spring??Java EE 6?????????? ???????? “??”?Spring??Java EE 6?????????????????????????????????? Spring????????????????????????????5?6???????????Spring?????????????????????????????????????????????????????????????????????? ????Spring?????????????????????????????????????????????????????????????????????????????????????????????????????? ???Spring????????????5??10?????????????????????????????????????????????????????????????????????????????????? ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????????????????????????????????????????????????????????????????????????????????·????????????????Java EE 6??????????????1????????????? Java EE 6???????????3????????????????·?????????????????????????????????????????????????????????????Java EE 6???????????????????????? ?????1???????????????Spring????????????????????????????????????????????????????????????????????????????????????????????? ?????????????????????????????????????????????????????????????????????????????????????????????????? Java EE???????????? ?????????????????????????Java EE?????????????????????????????Java EE??????????Spring?????????????????? ????Java EE?????? ??1????????Java EE?????????????????????Java EE?????????????????????????????????????????????????????????????? Java Developers Workshop 2012 Summer??????Java EE 6???????????? ????GlassFish?????????????????Java EE 6???WAR?????????????????????????????????????????????????????????????·????????????????????100KB?????????????????????????????????????????? Spring??????2????????Java EE???Dependency Injection(DI)??????????????DI??Spring?????????????????????????????Java EE 6???Context Dependency Injection(CDI)???????????DI?????????????Java EE 6????????????????CDI??????????????????? 3?????????????Aspect Oriented Programming(AOP)???????????????????????????????AOP?????????????????????????????????????????????????????????????AOP????????????????????????????????AOP??????????????????????????????????Java EE 6???Interceptor???????Spring AOP??????????????????????????????????????????? 4????????Java EE??????????IDE????????????????????EJB?????????????????????????????????????????Java EE 6?????????????????????????NetBeans?Eclipse?????????????IDE????????????????????????????????????????????????????????????????????????????????????????? ???????Spring?Java EE????????????? ??????????????????Spring??????????????????Java EE 6??????????? ????Java EE???????????(integration testing)?????????????????????Arquillian???????????????????????·????????Arqullian??????????????????????????????????????????????????????????????GlassFish?JBoss???????????·???????????JUnit??????·????????????????????????????? Spring??Java EE?????????5??????? Java EE 6??Spring?????????????????????????????Spring??Java EE 6???????????????????????????????????Spring????????????????????????????? ???????????“????·??·????”????????????????????????????????(????????·??)????????????Java EE 6?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????1-Spring?????????? ????????????????????Spring?????????????????XML?????????????????????O/R?????·?????????????????????Web????????·???????????????????????? ???????????????????????Spring??????????????????????Spring????????????????????????·???????????????????Spring 3.x??JPA?JSF????Java EE 6??????????????Spring???????????????????????Java EE 6??????????????????????????????????????????? ?????2-Spring?????????????????? ????????????????????????????Spring???????????????????????????????????????????????????Spring???????????????·???????????????????? ????????????????????????????????????“???(??)”???????Web MVC???Kodo??????????????JSF?JPA????????????????????????????????????????????????????????????????????????????????? ?????????????????JSF?????????????Playframework????????????????????????Java EE 6??????????????????????????????????????????????????????????Spring???API??????????????????? ?????3:Spring?????????Java EE 6???????????????? ??????????????????????????Spring??????Java EE????????·??????????????? ????Spring?????????????????????????·???????WAR?????????????????????????????Spring??????????????Spring Beans???????????????????????? ???Java EE??????????????????????????????????????????Java EE 6????????????????·???????CDI????EJB??????????????????????????WAR???????CDI Bean?Session Bean????????????????CDI/EJB????????????????????????????EJB??????Spring?????????????????????? Spring??????Java EE????????·?????????????????????????????????? ???????Spring??????????Java EE???????????WAR??????????????????????????Java EE?????????Spring??????????????????????Java EE??????????? ?????????????????????Spring?Java EE???????????????????????????????????????????????????????????????(???)??????????????????????3????????????????? ????????????Spring?Java EE?????????????? Spring????????????????????????EJB????????CDI??????????????????????????????????????????????????????????CDI????????@Inject????????????????????????? ?????4:Spring??????????? 4??????????????Spring??????????????????????3???????Spring?Java EE??????????? ????3???Java EE 6?????????????Spring???????????????????Java EE 6??????????????????????Java EE 6??????????????????????????????? ?????????Spring JDBC???????????????????????????????????????Spring JDBC????????????????????????????????????? ??????????????·?????????????????????????????????????????????Spring??????????EJB?DAO(Data Access Object)???????????Spring???????????????????????Java EE?????????(???????????????·???????????)? Java EE 6???EJB?JPA??????????????????EJB?????????????????????????JPA????????????????????????Java EE???????????????EJB???????????????????????Java EE 6???EJB????????????????????Spring DAO?Java EE????????????????????????????EJB???????????????Java EE 6?????EJB?????????????????????? Spring?JDBC Templates??????????????“???”?????????O/R????????????????JDBC Templates???????????????????????????????????????O/R???????????????????? ????????????????????JDBC Template??????????????????????????????????????????????????????????????CDI?????????????JDBC Template??????Spring???????????????????????????????????????JDBC Template?Spring????????????????????????????????Template Producer???????CDI??JDBC Template???????????? ?????5:Spring????????? ???????????Spring?????????????????????????????Spring??????????????????Java EE 6?????????????????????pom.xml?????????????????????????????????????????????·????????????WAR????????????????????? ?2????????????? ???Spring??Java EE 6????????????????????????????????????????????????????????????????????????? ????????????????2???????1????????????????????????????????????????????????????????????????????????????????Spring????????????????????????????????????????????????????????????????????????????????????????????????????10????????????????????????????????????????Java EE?????10??????????????·?????????????????????????????????????????? ??????????????????????????????????Spring???????????????????????????????Java EE?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????“?”???????? Spring????????????·????????????????????????????????????JCP???????·?????????????????????????????????????????????????????????????????????????????????????????????????Hibernate?JPA????????????Spring???????????????? ?????????????????????!?Java Developers Workshop 2012 Summer???????????????!! ???Java Developers Workshop 2012 Summer??????????????Oracle Technology Network?????·???? ????????????????????????????????????????????????OTN??????????????? ? ????????? ? Oracle Technology Network?????·???? ???? ?Java Developers Workshop 2012 Summer?– Java EE ?????? – ? ??????????oracle.com???????????????oracle.com????????????????????????????(???????)????????????????????????????????????????????????????????????????????

    Read the article

  • How and where to implement basic authentication in Kibana 3

    - by Jabb
    I have put my elasticsearch server behind a Apache reverse proxy that provides basic authentication. Authenticating to Apache directly from the browser works fine. However, when I use Kibana 3 to access the server, I receive authentication errors. Obviously because no auth headers are sent along with Kibana's Ajax calls. I added the below to elastic-angular-client.js in the Kibana vendor directory to implement authentication quick and dirty. But for some reason it does not work. $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); What is the best approach and place to implement basic authentication in Kibana? /*! elastic.js - v1.1.1 - 2013-05-24 * https://github.com/fullscale/elastic.js * Copyright (c) 2013 FullScale Labs, LLC; Licensed MIT */ /*jshint browser:true */ /*global angular:true */ 'use strict'; /* Angular.js service wrapping the elastic.js API. This module can simply be injected into your angular controllers. */ angular.module('elasticjs.service', []) .factory('ejsResource', ['$http', function ($http) { return function (config) { var // use existing ejs object if it exists ejs = window.ejs || {}, /* results are returned as a promise */ promiseThen = function (httpPromise, successcb, errorcb) { return httpPromise.then(function (response) { (successcb || angular.noop)(response.data); return response.data; }, function (response) { (errorcb || angular.noop)(response.data); return response.data; }); }; // check if we have a config object // if not, we have the server url so // we convert it to a config object if (config !== Object(config)) { config = {server: config}; } // set url to empty string if it was not specified if (config.server == null) { config.server = ''; } /* implement the elastic.js client interface for angular */ ejs.client = { server: function (s) { if (s == null) { return config.server; } config.server = s; return this; }, post: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); console.log($http.defaults.headers); path = config.server + path; var reqConfig = {url: path, data: data, method: 'POST'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, get: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; // no body on get request, data will be request params var reqConfig = {url: path, params: data, method: 'GET'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, put: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; var reqConfig = {url: path, data: data, method: 'PUT'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, del: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; var reqConfig = {url: path, data: data, method: 'DELETE'}; return promiseThen($http(angular.extend(reqConfig, config)), successcb, errorcb); }, head: function (path, data, successcb, errorcb) { $http.defaults.headers.common.Authorization = 'Basic ' + Base64Encode('user:Password'); path = config.server + path; // no body on HEAD request, data will be request params var reqConfig = {url: path, params: data, method: 'HEAD'}; return $http(angular.extend(reqConfig, config)) .then(function (response) { (successcb || angular.noop)(response.headers()); return response.headers(); }, function (response) { (errorcb || angular.noop)(undefined); return undefined; }); } }; return ejs; }; }]); UPDATE 1: I implemented Matts suggestion. However, the server returns a weird response. It seems that the authorization header is not working. Could it have to do with the fact, that I am running Kibana on port 81 and elasticsearch on 8181? OPTIONS /solar_vendor/_search HTTP/1.1 Host: 46.252.46.173:8181 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:25.0) Gecko/20100101 Firefox/25.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Origin: http://46.252.46.173:81 Access-Control-Request-Method: POST Access-Control-Request-Headers: authorization,content-type Connection: keep-alive Pragma: no-cache Cache-Control: no-cache This is the response HTTP/1.1 401 Authorization Required Date: Fri, 08 Nov 2013 23:47:02 GMT WWW-Authenticate: Basic realm="Username/Password" Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 346 Connection: close Content-Type: text/html; charset=iso-8859-1 UPDATE 2: Updated all instances with the modified headers in these Kibana files root@localhost:/var/www/kibana# grep -r 'ejsResource(' . ./src/app/controllers/dash.js: $scope.ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); ./src/app/services/querySrv.js: var ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); ./src/app/services/filterSrv.js: var ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); ./src/app/services/dashboard.js: var ejs = ejsResource({server: config.elasticsearch, headers: {'Access-Control-Request-Headers': 'Accept, Origin, Authorization', 'Authorization': 'Basic XXXXXXXXXXXXXXXXXXXXXXXXXXXXX=='}}); And modified my vhost conf for the reverse proxy like this <VirtualHost *:8181> ProxyRequests Off ProxyPass / http://127.0.0.1:9200/ ProxyPassReverse / https://127.0.0.1:9200/ <Location /> Order deny,allow Allow from all AuthType Basic AuthName “Username/Password” AuthUserFile /var/www/cake2.2.4/.htpasswd Require valid-user Header always set Access-Control-Allow-Methods "GET, POST, DELETE, OPTIONS, PUT" Header always set Access-Control-Allow-Headers "Content-Type, X-Requested-With, X-HTTP-Method-Override, Origin, Accept, Authorization" Header always set Access-Control-Allow-Credentials "true" Header always set Cache-Control "max-age=0" Header always set Access-Control-Allow-Origin * </Location> ErrorLog ${APACHE_LOG_DIR}/error.log </VirtualHost> Apache sends back the new response headers but the request header still seems to be wrong somewhere. Authentication just doesn't work. Request Headers OPTIONS /solar_vendor/_search HTTP/1.1 Host: 46.252.26.173:8181 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:25.0) Gecko/20100101 Firefox/25.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Origin: http://46.252.26.173:81 Access-Control-Request-Method: POST Access-Control-Request-Headers: authorization,content-type Connection: keep-alive Pragma: no-cache Cache-Control: no-cache Response Headers HTTP/1.1 401 Authorization Required Date: Sat, 09 Nov 2013 08:48:48 GMT Access-Control-Allow-Methods: GET, POST, DELETE, OPTIONS, PUT Access-Control-Allow-Headers: Content-Type, X-Requested-With, X-HTTP-Method-Override, Origin, Accept, Authorization Access-Control-Allow-Credentials: true Cache-Control: max-age=0 Access-Control-Allow-Origin: * WWW-Authenticate: Basic realm="Username/Password" Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 346 Connection: close Content-Type: text/html; charset=iso-8859-1 SOLUTION: After doing some more research, I found out that this is definitely a configuration issue with regard to CORS. There are quite a few posts available regarding that topic but it appears that in order to solve my problem, it would be necessary to to make some very granular configurations on apache and also make sure that the right stuff is sent from the browser. So I reconsidered the strategy and found a much simpler solution. Just modify the vhost reverse proxy config to move the elastisearch server AND kibana on the same http port. This also adds even better security to Kibana. This is what I did: <VirtualHost *:8181> ProxyRequests Off ProxyPass /bigdatadesk/ http://127.0.0.1:81/bigdatadesk/src/ ProxyPassReverse /bigdatadesk/ http://127.0.0.1:81/bigdatadesk/src/ ProxyPass / http://127.0.0.1:9200/ ProxyPassReverse / https://127.0.0.1:9200/ <Location /> Order deny,allow Allow from all AuthType Basic AuthName “Username/Password” AuthUserFile /var/www/.htpasswd Require valid-user </Location> ErrorLog ${APACHE_LOG_DIR}/error.log </VirtualHost>

    Read the article

  • Implementing an async "read all currently available data from stream" operation

    - by Jon
    I recently provided an answer to this question: C# - Realtime console output redirection. As often happens, explaining stuff (here "stuff" was how I tackled a similar problem) leads you to greater understanding and/or, as is the case here, "oops" moments. I realized that my solution, as implemented, has a bug. The bug has little practical importance, but it has an extremely large importance to me as a developer: I can't rest easy knowing that my code has the potential to blow up. Squashing the bug is the purpose of this question. I apologize for the long intro, so let's get dirty. I wanted to build a class that allows me to receive input from a console's standard output Stream. Console output streams are of type FileStream; the implementation can cast to that, if needed. There is also an associated StreamReader already present to leverage. There is only one thing I need to implement in this class to achieve my desired functionality: an async "read all the data available this moment" operation. Reading to the end of the stream is not viable because the stream will not end unless the process closes the console output handle, and it will not do that because it is interactive and expecting input before continuing. I will be using that hypothetical async operation to implement event-based notification, which will be more convenient for my callers. The public interface of the class is this: public class ConsoleAutomator { public event EventHandler<ConsoleOutputReadEventArgs> StandardOutputRead; public void StartSendingEvents(); public void StopSendingEvents(); } StartSendingEvents and StopSendingEvents do what they advertise; for the purposes of this discussion, we can assume that events are always being sent without loss of generality. The class uses these two fields internally: protected readonly StringBuilder inputAccumulator = new StringBuilder(); protected readonly byte[] buffer = new byte[256]; The functionality of the class is implemented in the methods below. To get the ball rolling: public void StartSendingEvents(); { this.stopAutomation = false; this.BeginReadAsync(); } To read data out of the Stream without blocking, and also without requiring a carriage return char, BeginRead is called: protected void BeginReadAsync() { if (!this.stopAutomation) { this.StandardOutput.BaseStream.BeginRead( this.buffer, 0, this.buffer.Length, this.ReadHappened, null); } } The challenging part: BeginRead requires using a buffer. This means that when reading from the stream, it is possible that the bytes available to read ("incoming chunk") are larger than the buffer. Remember that the goal here is to read all of the chunk and call event subscribers exactly once for each chunk. To this end, if the buffer is full after EndRead, we don't send its contents to subscribers immediately but instead append them to a StringBuilder. The contents of the StringBuilder are only sent back whenever there is no more to read from the stream. private void ReadHappened(IAsyncResult asyncResult) { var bytesRead = this.StandardOutput.BaseStream.EndRead(asyncResult); if (bytesRead == 0) { this.OnAutomationStopped(); return; } var input = this.StandardOutput.CurrentEncoding.GetString( this.buffer, 0, bytesRead); this.inputAccumulator.Append(input); if (bytesRead < this.buffer.Length) { this.OnInputRead(); // only send back if we 're sure we got it all } this.BeginReadAsync(); // continue "looping" with BeginRead } After any read which is not enough to fill the buffer (in which case we know that there was no more data to be read during the last read operation), all accumulated data is sent to the subscribers: private void OnInputRead() { var handler = this.StandardOutputRead; if (handler == null) { return; } handler(this, new ConsoleOutputReadEventArgs(this.inputAccumulator.ToString())); this.inputAccumulator.Clear(); } (I know that as long as there are no subscribers the data gets accumulated forever. This is a deliberate decision). The good This scheme works almost perfectly: Async functionality without spawning any threads Very convenient to the calling code (just subscribe to an event) Never more than one event for each time data is available to be read Is almost agnostic to the buffer size The bad That last almost is a very big one. Consider what happens when there is an incoming chunk with length exactly equal to the size of the buffer. The chunk will be read and buffered, but the event will not be triggered. This will be followed up by a BeginRead that expects to find more data belonging to the current chunk in order to send it back all in one piece, but... there will be no more data in the stream. In fact, as long as data is put into the stream in chunks with length exactly equal to the buffer size, the data will be buffered and the event will never be triggered. This scenario may be highly unlikely to occur in practice, especially since we can pick any number for the buffer size, but the problem is there. Solution? Unfortunately, after checking the available methods on FileStream and StreamReader, I can't find anything which lets me peek into the stream while also allowing async methods to be used on it. One "solution" would be to have a thread wait on a ManualResetEvent after the "buffer filled" condition is detected. If the event is not signaled (by the async callback) in a small amount of time, then more data from the stream will not be forthcoming and the data accumulated so far should be sent to subscribers. However, this introduces the need for another thread, requires thread synchronization, and is plain inelegant. Specifying a timeout for BeginRead would also suffice (call back into my code every now and then so I can check if there's data to be sent back; most of the time there will not be anything to do, so I expect the performance hit to be negligible). But it looks like timeouts are not supported in FileStream. Since I imagine that async calls with timeouts are an option in bare Win32, another approach might be to PInvoke the hell out of the problem. But this is also undesirable as it will introduce complexity and simply be a pain to code. Is there an elegant way to get around the problem? Thanks for being patient enough to read all of this. Update: I definitely did not communicate the scenario well in my initial writeup. I have since revised the writeup quite a bit, but to be extra sure: The question is about how to implement an async "read all the data available this moment" operation. My apologies to the people who took the time to read and answer without me making my intent clear enough.

    Read the article

  • HELP!! Delayed-job: Rake aborted! Can't modify frozen hash

    - by pmneve
    Too bad even the trace doesn't say which hash is involved. Sorry this post is long: am trying to provide enough context to be meaningful. Occurs intermittently when rake jobs:work is pulling a command out of delayed_jobs while my status observer is in the process of parsing a log file for detailed results of the previous delayed_job denizen. I have an observer class (in RAILS_ROOT/lib ) which listens for the events, makes a copy of them and calls the owner class ( in apps/models ) which then calls on the log parser (also in /lib) to do the actual work. (Should both of those classes, the observer and the parser be in app/models?) Am due to deliver this application in a few days and this is killing it (and me). Am using DirectoryWatcher to look for flag files that indicate the start and finish of the delayed_jobs. That is started at the end of environment.rb like this: require 'directory_watcher' $scriptStatusObserver = ScriptStatusObserver.new dirToWatch ="#{RAILS_ROOT}/tmp/flags" $directoryWatcher = DirectoryWatcher.new( dirToWatch ) $directoryWatcher.glob= "*.flg" $directoryWatcher.interval=(15) $directoryWatcher.add_observer( $scriptStatusObserver ) $directoryWatcher.persist=("#{RAILS_ROOT}/tmp/flags/dw_state.yml") $directoryWatcher.start at_exit { $directoryWatcher.stop } This code is outside of the run method (btw is that the best place or is inside the run better?) Here is the observer: require 'script_run' class ScriptStatusObserver def initialize @rcvdEvents = [] end def update( *events ) begin puts "#{LINE.to_s}: ScriptStatusObserver events: \n"+events.to_yaml cnt = 0 events.each do |e| if e.to_s.match(/^\s*added/) cnt = cnt + 1 @rcvdEvents << e end end ScriptRun.new.catch_up( @rcvdEvents ) if cnt > 0 @rcvdEvents.clear rescue puts $! end end end Here is ScriptRun (it attaches to an associative table built with has_many:through) require 'observer' class ScriptRun < ActiveRecord::Base set_table_name "scripts_runs" belongs_to :script belongs_to :run def parse( result ) parser = LogParser.new parser.parse(result) end def catch_up( events ) events.each do |e| typ = e.type path = e.path thisMatch = path.match(/flags\/(\d+)_(\d+)_([\d\.]+)_(\w+)\.flg/) run_id = thisMatch[1] script_id = thisMatch[2] ts = thisMatch[3] status = thisMatch[4] if e.to_s.match(/^\s*added/) status_update( script_id, run_id, status, ts, path ) end end end def status_update( script_id, run_id, status, ts, path ) scriptrun = ScriptRun.find(:first, :conditions => [ "run_id = ? and script_id = ?", run_id.to_i, script_id.to_i ]) if scriptrun.kind_of?(ScriptRun) currStatus = scriptrun.status if not currStatus == 'completed' scriptrun.update_attribute(:status, status) if status == 'parse' flag = File.new(path) logSpec = flag.gets flag.close logName = File.basename(logSpec) logPath = logSpec.sub(logName, '') logName =~ /^(([\w_]+)_([\w]+)_(\d+))\.log$/ name = $1 basename = $2 runenv = $3 tsOrPid = $4 result = Result.new result.log_path = logPath result.basename = basename result.name = name result.script_id = script_id.to_i result.run_id = run_id.to_i if runenv == 'sit' runenv = 'SIT3348' end result.application_environment_id = ApplicationEnvironment.find(:first, :conditions => [ "nodename = ?", runenv]).id parse(result) if run_completed?( run_id ) myRun = Run.find(run_id.to_i) if myRun.kind_of?( Run ) myRun.update_attribute( :completed, Time.now.to_f ) end end end end else puts "#{__LINE__.to_s}: ScriptRun.status_update: ScriptRun not found for run #{run_id} script #{script_id} ts #{ts.to_s}" end File.delete(path) end def run_completed?( id ) scriptruns = ScriptRun.find(:all, :conditions = [ "run_id = ?", id.to_i] ) scriptruns.each do |sr| if not sr.status == 'completed' return false end end return true end end LogParser is too long even for this post but it reads the script log and pulls detailed information (counts and timings) out of the log and writes to a details table. It also tallies and calculates averages and rolls those up into summary tables for quicker access from the web pages. Here is the error trace: (don't ask why everything is under my Windows profile. It's a long story) Scanner running 1270239731.43 directory_watcher.notify_observers: #, #] update:[#, /pneve/workspace/waftt-0.29/tmp/flags/100039_18_1270239550.108_parse.flg"] rake aborted! can't modify frozen hash C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:in []=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:inwrite_attribute_without_dirty' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/dirty.rb:139:in write_attribute' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:211:inlast_error=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:141:in handle_failed_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:115:inrun' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:162:in reserve_and_run_one_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:92:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:in times' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:66:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activesupport/ lib/active_support/core_ext/benchmark.rb:10:inrealtime' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:65:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:inloop' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/tasks.rb:13 c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:incall' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:597:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/1.8/monitor.rb:242:in synchronize ' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:590:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:583:in invoke' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2051:ininvoke_task' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:instandard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2023:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2001:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:in standard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:1998:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/bin/rake: 31 c:/Documents and Settings/pneve/ruby/bin/rake:16:in `load' c:/Documents and Settings/pneve/ruby/bin/rake:16

    Read the article

  • HELP!! Rake aborted! Can't modify frozen hash

    - by pmneve
    Too bad even the trace doesn't say which hash is involved. Sorry this post is long: am trying to provide enough context to be meaningful. Occurs intermittently when rake jobs:work is pulling a command out of delayed_jobs while my status observer is in the process of parsing a log file for detailed results of the previous delayed_job denizen. I have an observer class (in RAILS_ROOT/lib ) which listens for the events, makes a copy of them and calls the owner class ( in apps/models ) which then calls on the log parser (also in /lib) to do the actual work. (Should both of those classes, the observer and the parser be in app/models?) Am due to deliver this application in a few days and this is killing it (and me). Am using DirectoryWatcher to look for flag files that indicate the start and finish of the delayed_jobs. That is started at the end of environment.rb like this: require 'directory_watcher' $scriptStatusObserver = ScriptStatusObserver.new dirToWatch ="#{RAILS_ROOT}/tmp/flags" $directoryWatcher = DirectoryWatcher.new( dirToWatch ) $directoryWatcher.glob= "*.flg" $directoryWatcher.interval=(15) $directoryWatcher.add_observer( $scriptStatusObserver ) $directoryWatcher.persist=("#{RAILS_ROOT}/tmp/flags/dw_state.yml") $directoryWatcher.start at_exit { $directoryWatcher.stop } This code is outside of the run method (btw is that the best place or is inside the run better?) Here is the observer: require 'script_run' class ScriptStatusObserver def initialize @rcvdEvents = [] end def update( *events ) begin puts "#{LINE.to_s}: ScriptStatusObserver events: \n"+events.to_yaml cnt = 0 events.each do |e| if e.to_s.match(/^\s*added/) cnt = cnt + 1 @rcvdEvents << e end end ScriptRun.new.catch_up( @rcvdEvents ) if cnt > 0 @rcvdEvents.clear rescue puts $! end end end Here is ScriptRun (it attaches to an associative table built with has_many:through) require 'observer' class ScriptRun < ActiveRecord::Base set_table_name "scripts_runs" belongs_to :script belongs_to :run def parse( result ) parser = LogParser.new parser.parse(result) end def catch_up( events ) events.each do |e| typ = e.type path = e.path thisMatch = path.match(/flags\/(\d+)_(\d+)_([\d\.]+)_(\w+)\.flg/) run_id = thisMatch[1] script_id = thisMatch[2] ts = thisMatch[3] status = thisMatch[4] if e.to_s.match(/^\s*added/) status_update( script_id, run_id, status, ts, path ) end end end def status_update( script_id, run_id, status, ts, path ) scriptrun = ScriptRun.find(:first, :conditions => [ "run_id = ? and script_id = ?", run_id.to_i, script_id.to_i ]) if scriptrun.kind_of?(ScriptRun) currStatus = scriptrun.status if not currStatus == 'completed' scriptrun.update_attribute(:status, status) if status == 'parse' flag = File.new(path) logSpec = flag.gets flag.close logName = File.basename(logSpec) logPath = logSpec.sub(logName, '') logName =~ /^(([\w_]+)_([\w]+)_(\d+))\.log$/ name = $1 basename = $2 runenv = $3 tsOrPid = $4 result = Result.new result.log_path = logPath result.basename = basename result.name = name result.script_id = script_id.to_i result.run_id = run_id.to_i if runenv == 'sit' runenv = 'SIT3348' end result.application_environment_id = ApplicationEnvironment.find(:first, :conditions => [ "nodename = ?", runenv]).id parse(result) if run_completed?( run_id ) myRun = Run.find(run_id.to_i) if myRun.kind_of?( Run ) myRun.update_attribute( :completed, Time.now.to_f ) end end end end else puts "#{__LINE__.to_s}: ScriptRun.status_update: ScriptRun not found for run #{run_id} script #{script_id} ts #{ts.to_s}" end File.delete(path) end def run_completed?( id ) scriptruns = ScriptRun.find(:all, :conditions = [ "run_id = ?", id.to_i] ) scriptruns.each do |sr| if not sr.status == 'completed' return false end end return true end end LogParser is too long even for this post but it reads the script log and pulls detailed information (counts and timings) out of the log and writes to a details table. It also tallies and calculates averages and rolls those up into summary tables for quicker access from the web pages. Here is the error trace: (don't ask why everything is under my Windows profile. It's a long story) Scanner running 1270239731.43 directory_watcher.notify_observers: #, #] update:[#, /pneve/workspace/waftt-0.29/tmp/flags/100039_18_1270239550.108_parse.flg"] rake aborted! can't modify frozen hash C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:in []=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:inwrite_attribute_without_dirty' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/dirty.rb:139:in write_attribute' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:211:inlast_error=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:141:in handle_failed_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:115:inrun' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:162:in reserve_and_run_one_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:92:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:in times' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:66:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activesupport/ lib/active_support/core_ext/benchmark.rb:10:inrealtime' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:65:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:inloop' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/tasks.rb:13 c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:incall' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:597:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/1.8/monitor.rb:242:in synchronize ' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:590:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:583:in invoke' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2051:ininvoke_task' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:instandard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2023:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2001:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:in standard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:1998:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/bin/rake: 31 c:/Documents and Settings/pneve/ruby/bin/rake:16:in `load' c:/Documents and Settings/pneve/ruby/bin/rake:16

    Read the article

  • Implementing a robust async stream reader

    - by Jon
    I recently provided an answer to this question: C# - Realtime console output redirection. As often happens, explaining stuff (here "stuff" was how I tackled a similar problem) leads you to greater understanding and/or, as is the case here, "oops" moments. I realized that my solution, as implemented, has a bug. The bug has little practical importance, but it has an extremely large importance to me as a developer: I can't rest easy knowing that my code has the potential to blow up. Squashing the bug is the purpose of this question. I apologize for the long intro, so let's get dirty. I wanted to build a class that allows me to receive input from a Stream in an event-based manner. The stream, in my scenario, is guaranteed to be a FileStream and there is also an associated StreamReader already present to leverage. The public interface of the class is this: public class MyStreamManager { public event EventHandler<ConsoleOutputReadEventArgs> StandardOutputRead; public void StartSendingEvents(); public void StopSendingEvents(); } Obviously this specific scenario has to do with a console's standard output, but that is a detail and does not play an important role. StartSendingEvents and StopSendingEvents do what they advertise; for the purposes of this discussion, we can assume that events are always being sent without loss of generality. The class uses these two fields internally: protected readonly StringBuilder inputAccumulator = new StringBuilder(); protected readonly byte[] buffer = new byte[256]; The functionality of the class is implemented in the methods below. To get the ball rolling: public void StartSendingEvents(); { this.stopAutomation = false; this.BeginReadAsync(); } To read data out of the Stream without blocking, and also without requiring a carriage return char, BeginRead is called: protected void BeginReadAsync() { if (!this.stopAutomation) { this.StandardOutput.BaseStream.BeginRead( this.buffer, 0, this.buffer.Length, this.ReadHappened, null); } } The challenging part: BeginRead requires using a buffer. This means that when reading from the stream, it is possible that the bytes available to read ("incoming chunk") are larger than the buffer. Since we are only handing off data from the stream to a consumer, and that consumer may well have inside knowledge about the size and/or format of these chunks, I want to call event subscribers exactly once for each chunk. Otherwise the abstraction breaks down and the subscribers have to buffer the incoming data and reconstruct the chunks themselves using said knowledge. This is much less convenient to the calling code, and detracts from the usefulness of my class. To this end, if the buffer is full after EndRead, we don't send its contents to subscribers immediately but instead append them to a StringBuilder. The contents of the StringBuilder are only sent back whenever there is no more to read from the stream (thus preserving the chunks). private void ReadHappened(IAsyncResult asyncResult) { var bytesRead = this.StandardOutput.BaseStream.EndRead(asyncResult); if (bytesRead == 0) { this.OnAutomationStopped(); return; } var input = this.StandardOutput.CurrentEncoding.GetString( this.buffer, 0, bytesRead); this.inputAccumulator.Append(input); if (bytesRead < this.buffer.Length) { this.OnInputRead(); // only send back if we 're sure we got it all } this.BeginReadAsync(); // continue "looping" with BeginRead } After any read which is not enough to fill the buffer, all accumulated data is sent to the subscribers: private void OnInputRead() { var handler = this.StandardOutputRead; if (handler == null) { return; } handler(this, new ConsoleOutputReadEventArgs(this.inputAccumulator.ToString())); this.inputAccumulator.Clear(); } (I know that as long as there are no subscribers the data gets accumulated forever. This is a deliberate decision). The good This scheme works almost perfectly: Async functionality without spawning any threads Very convenient to the calling code (just subscribe to an event) Maintains the "chunkiness" of the data; this allows the calling code to use inside knowledge of the data without doing any extra work Is almost agnostic to the buffer size (it will work correctly with any size buffer irrespective of the data being read) The bad That last almost is a very big one. Consider what happens when there is an incoming chunk with length exactly equal to the size of the buffer. The chunk will be read and buffered, but the event will not be triggered. This will be followed up by a BeginRead that expects to find more data belonging to the current chunk in order to send it back all in one piece, but... there will be no more data in the stream. In fact, as long as data is put into the stream in chunks with length exactly equal to the buffer size, the data will be buffered and the event will never be triggered. This scenario may be highly unlikely to occur in practice, especially since we can pick any number for the buffer size, but the problem is there. Solution? Unfortunately, after checking the available methods on FileStream and StreamReader, I can't find anything which lets me peek into the stream while also allowing async methods to be used on it. One "solution" would be to have a thread wait on a ManualResetEvent after the "buffer filled" condition is detected. If the event is not signaled (by the async callback) in a small amount of time, then more data from the stream will not be forthcoming and the data accumulated so far should be sent to subscribers. However, this introduces the need for another thread, requires thread synchronization, and is plain inelegant. Specifying a timeout for BeginRead would also suffice (call back into my code every now and then so I can check if there's data to be sent back; most of the time there will not be anything to do, so I expect the performance hit to be negligible). But it looks like timeouts are not supported in FileStream. Since I imagine that async calls with timeouts are an option in bare Win32, another approach might be to PInvoke the hell out of the problem. But this is also undesirable as it will introduce complexity and simply be a pain to code. Is there an elegant way to get around the problem? Thanks for being patient enough to read all of this.

    Read the article

  • Xml failing to deserialise

    - by Carnotaurus
    I call a method to get my pages [see GetPages(String xmlFullFilePath)]. The FromXElement method is supposed to deserialise the LitePropertyData elements to strongly type LitePropertyData objects. Instead it fails on the following line: return (T)xmlSerializer.Deserialize(memoryStream); and gives the following error: <LitePropertyData xmlns=''> was not expected. What am I doing wrong? I have included the methods that I call and the xml data: public static T FromXElement<T>(this XElement xElement) { using (var memoryStream = new MemoryStream(Encoding.ASCII.GetBytes(xElement.ToString()))) { var xmlSerializer = new XmlSerializer(typeof(T)); return (T)xmlSerializer.Deserialize(memoryStream); } } public static List<LitePageData> GetPages(String xmlFullFilePath) { XDocument document = XDocument.Load(xmlFullFilePath); List<LitePageData> results = (from record in document.Descendants("row") select new LitePageData { Guid = IsValid(record, "Guid") ? record.Element("Guid").Value : null, ParentID = IsValid(record, "ParentID") ? Convert.ToInt32(record.Element("ParentID").Value) : (Int32?)null, Created = Convert.ToDateTime(record.Element("Created").Value), Changed = Convert.ToDateTime(record.Element("Changed").Value), Name = record.Element("Name").Value, ID = Convert.ToInt32(record.Element("ID").Value), LitePageTypeID = IsValid(record, "ParentID") ? Convert.ToInt32(record.Element("ParentID").Value) : (Int32?)null, Html = record.Element("Html").Value, FriendlyName = record.Element("FriendlyName").Value, Properties = record.Element("Properties") != null ? record.Element("Properties").Element("LitePropertyData").FromXElement<List<LitePropertyData>>() : new List<LitePropertyData>() }).ToList(); return results; } Here is the xml: <?xml version="1.0" encoding="utf-8"?> <root> <rows> <row> <ID>1</ID> <ImageUrl></ImageUrl> <Html>Home page</Html> <Created>01-01-2012</Created> <Changed>01-01-2012</Changed> <Name>Home page</Name> <FriendlyName>home-page</FriendlyName> </row> <row xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Guid>edeaf468-f490-4271-bf4d-be145bc6a1fd</Guid> <ID>8</ID> <Name>Unused</Name> <ParentID>1</ParentID> <Created>2006-03-25T10:57:17</Created> <Changed>2012-07-17T12:24:30.0984747+01:00</Changed> <ChangedBy /> <LitePageTypeID xsi:nil="true" /> <Html> What is the purpose of this option? This option checks the current document for accessibility issues. It uses Bobby to provide details of whether the current web page conforms to W3C's WCAG criteria for web content accessibility. Issues with Bobby and Cynthia Bobby and Cynthia are free services that supposedly allow a user to expose web page accessibility barriers. It is something of a guide but perhaps a blunt instrument. I tested a few of the webpages that I have designed. Sure enough, my pages fall short and for good reason. I am not about to claim that Bobby and Cynthia are useless. Although it is useful and commendable tool, it project appears to be overly ambitious. Nevertheless, let me explain my issues with Bobby and Cynthia: First, certain W3C standards for designing web documents are often too strict and unworkable. For instance, in some versions W3C standards for HTML, certain tags should not include a particular attribute, whereas in others they are requisite if the document is to be ???well-formed???. The standard that a designer chooses is determined usually by the requirements specification document. This specifies which browsers and versions of those browsers that the web page is expected to correctly display. Forcing a hypertext document to conform strictly to a specific W3C standard for HTML is often no simple task. In the worst case, it cannot conform without losing some aesthetics or accessibility functionality. Second, the case of HTML documents is not an isolated case. Standards for XML, XSL, JavaScript, VBScript, are analogous. Therefore, you might imagine the problems when you begin to combine these languages and formats in an HTML document. Third, there is always more than one way to skin a cat. For example, Bobby and Cynthia may flag those IMG tags that do not contain a TITLE attribute. There might be good reason that a web developer chooses not to include the title attribute. The title attribute has a limited numbers of characters and does not support carriage returns. This is a major defect in the design of this tag. In fact, before the TITLE attribute was supported, there was the ALT attribute. Most browsers support both, yet they both perform a similar function. However, both attributes share the same deficiencies. In practice, there are instances where neither attribute would be used. Instead, for example, the developer would write some JavaScript or VBScript to circumvent these deficiencies. The concern is that Bobby and Cynthia would not notice this because it does not ???understand??? what the JavaScript does. </Html> <FriendlyName>unused</FriendlyName> <IsDeleted>false</IsDeleted> <Properties> <LitePropertyData> <Description>Image for the page</Description> <DisplayEditUI>true</DisplayEditUI> <OwnerTab>1</OwnerTab> <DisplayName>Image Url</DisplayName> <FieldOrder>1</FieldOrder> <IsRequired>false</IsRequired> <Name>ImageUrl</Name> <IsModified>false</IsModified> <ParentPageID>3</ParentPageID> <Type>String</Type> <Value xsi:type="xsd:string">smarter.jpg</Value> </LitePropertyData> <LitePropertyData> <Description>WebItemApplicationEnum</Description> <DisplayEditUI>true</DisplayEditUI> <OwnerTab>1</OwnerTab> <DisplayName>WebItemApplicationEnum</DisplayName> <FieldOrder>1</FieldOrder> <IsRequired>false</IsRequired> <Name>WebItemApplicationEnum</Name> <IsModified>false</IsModified> <ParentPageID>3</ParentPageID> <Type>Number</Type> <Value xsi:type="xsd:string">1</Value> </LitePropertyData> </Properties> <Seo> <Author>Phil Carney</Author> <Classification /> <Copyright>Carnotaurus</Copyright> <Description> What is the purpose of this option? This option checks the current document for accessibility issues. It uses Bobby to provide details of whether the current web page conforms to W3C's WCAG criteria for web content accessibility. Issues with Bobby and Cynthia Bobby and Cynthia are free services that supposedly allow a user to expose web page accessibility barriers. It is something of a guide but perhaps a blunt instrument. I tested a few of the webpages that I have designed. Sure enough, my pages fall short and for good reason. I am not about to claim that Bobby and Cynthia are useless. Although it is useful and commendable tool, it project appears to be overly ambitious. Nevertheless, let me explain my issues with Bobby and Cynthia: First, certain W3C standards for designing web documents are often too strict and unworkable. For instance, in some versions W3C standards for HTML, certain tags should not include a particular attribute, whereas in others they are requisite if the document is to be ???well-formed???. The standard that a designer chooses is determined usually by the requirements specification document. This specifies which browsers and versions of those browsers that the web page is expected to correctly display. Forcing a hypertext document to conform strictly to a specific W3C standard for HTML is often no simple task. In the worst case, it cannot conform without losing some aesthetics or accessibility functionality. Second, the case of HTML documents is not an isolated case. Standards for XML, XSL, JavaScript, VBScript, are analogous. Therefore, you might imagine the problems when you begin to combine these languages and formats in an HTML document. Third, there is always more than one way to skin a cat. For example, Bobby and Cynthia may flag those IMG tags that do not contain a TITLE attribute. There might be good reason that a web developer chooses not to include the title attribute. The title attribute has a limited numbers of characters and does not support carriage returns. This is a major defect in the design of this tag. In fact, before the TITLE attribute was supported, there was the ALT attribute. Most browsers support both, yet they both perform a similar function. However, both attributes share the same deficiencies. In practice, there are instances where neither attribute would be used. Instead, for example, the developer would write some JavaScript or VBScript to circumvent these deficiencies. The concern is that Bobby and Cynthia would not notice this because it does not ???understand??? what the JavaScript does. </Description> <Keywords>unused</Keywords> <Title>unused</Title> </Seo> </row> </rows> </root> EDIT Here are my entities: public class LitePropertyData { public virtual string Description { get; set; } public virtual bool DisplayEditUI { get; set; } public int OwnerTab { get; set; } public virtual string DisplayName { get; set; } public int FieldOrder { get; set; } public bool IsRequired { get; set; } public string Name { get; set; } public virtual bool IsModified { get; set; } public virtual int ParentPageID { get; set; } public LiteDataType Type { get; set; } public object Value { get; set; } } [Serializable] public class LitePageData { public String Guid { get; set; } public Int32 ID { get; set; } public String Name { get; set; } public Int32? ParentID { get; set; } public DateTime Created { get; set; } public String CreatedBy { get; set; } public DateTime Changed { get; set; } public String ChangedBy { get; set; } public Int32? LitePageTypeID { get; set; } public String Html { get; set; } public String FriendlyName { get; set; } public Boolean IsDeleted { get; set; } public List<LitePropertyData> Properties { get; set; } public LiteSeoPageData Seo { get; set; } /// <summary> /// Saves the specified XML full file path. /// </summary> /// <param name="xmlFullFilePath">The XML full file path.</param> public void Save(String xmlFullFilePath) { XDocument doc = XDocument.Load(xmlFullFilePath); XElement demoNode = this.ToXElement<LitePageData>(); demoNode.Name = "row"; doc.Descendants("rows").Single().Add(demoNode); doc.Save(xmlFullFilePath); } }

    Read the article

  • Edit Contact code worked in 1.6 but doesn't work on Droid 2.1?

    - by user225405
    Hi All, I had some fairly simple code in my app to invoke Edit Contact activity on a known good contact index that worked in Android 1.6 but is broken for me now in Android 2.1 on the Droid. I built a sample activity/app 'EdCon' to show this: package com.jbh; import android.app.Activity; import android.content.Intent; import android.net.Uri; import android.os.Bundle; public class EdCon extends Activity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); // Build an intent to edit a known good contact index Intent i; i = new Intent(Intent.ACTION_EDIT); i.setData(Uri.parse("content://contacts/people/10")); startActivity(i); } } When I run this on my G1 running 1.6 it works as expected i.e. brings up the Edit Contact screen for the known index and then I can hit BACK to return to "Hello World, EdCon". When I run this on the Droid under 2.1 I get the following: 05-07 15:35:57.787: INFO/ActivityManager(1013): Starting activity: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 cmp=com.jbh/.EdCon } 05-07 15:35:57.826: DEBUG/AndroidRuntime(13780): Shutting down VM 05-07 15:35:57.826: DEBUG/dalvikvm(13780): DestroyJavaVM waiting for non-daemon threads to exit 05-07 15:35:57.928: DEBUG/dalvikvm(13780): DestroyJavaVM shutting VM down 05-07 15:35:57.928: DEBUG/dalvikvm(13780): HeapWorker thread shutting down 05-07 15:35:57.928: DEBUG/dalvikvm(13780): HeapWorker thread has shut down 05-07 15:35:57.928: DEBUG/jdwp(13780): JDWP shutting down net... 05-07 15:35:57.928: DEBUG/jdwp(13780): Got wake-up signal, bailing out of select 05-07 15:35:57.928: INFO/dalvikvm(13780): Debugger has detached; object registry had 1 entries 05-07 15:35:57.928: DEBUG/dalvikvm(13780): VM cleaning up 05-07 15:35:57.935: INFO/ActivityManager(1013): Start proc com.jbh for activity com.jbh/.EdCon: pid=13802 uid=10052 gids={1015} 05-07 15:35:57.967: ERROR/AndroidRuntime(13780): ERROR: thread attach failed 05-07 15:35:58.053: INFO/ActivityThread(13792): Publishing provider com.android.vending.SuggestionsProvider: com.android.vending.SuggestionsProvider 05-07 15:35:58.154: INFO/dalvikvm(13802): Debugger thread not active, ignoring DDM send (t=0x41504e4d l=38) 05-07 15:35:58.209: DEBUG/dalvikvm(13780): LinearAlloc 0x0 used 639500 of 5242880 (12%) 05-07 15:35:58.365: INFO/dalvikvm(13802): Debugger thread not active, ignoring DDM send (t=0x41504e4d l=18) 05-07 15:35:58.639: INFO/ActivityManager(1013): Starting activity: Intent { act=android.intent.action.EDIT dat=content://contacts/people/10 cmp=com.android.contacts/.ui.EditContactActivity } 05-07 15:35:58.975: DEBUG/dalvikvm(13137): GC freed 2902 objects / 166768 bytes in 61ms 05-07 15:35:59.100: DEBUG/vending(13792): com.android.vending.LocalDbSyncService.run(): Syncing local DB with package manager... 05-07 15:35:59.100: DEBUG/vending(13792): com.android.vending.LocalDbSyncService.syncLocalDbWithPackageManager(): No INSTALLING or UNINSTALLING assets. 05-07 15:35:59.115: INFO/ActivityManager(1013): Displayed activity com.android.contacts/.ui.EditContactActivity: 387 ms (total 1296 ms) 05-07 15:35:59.185: DEBUG/Sources(13137): Creating external source for type=com.facebook.auth.login, packageName=com.facebook.katana 05-07 15:35:59.225: DEBUG/vending(13792): com.android.vending.LocalDbSyncService.run(): Syncing done. 05-07 15:35:59.232: WARN/dalvikvm(13137): threadid=27: thread exiting with uncaught exception (group=0x4001b180) 05-07 15:35:59.232: ERROR/AndroidRuntime(13137): Uncaught handler: thread AsyncTask #1 exiting due to uncaught exception 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): java.lang.RuntimeException: An error occured while executing doInBackground() 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.os.AsyncTask$3.done(AsyncTask.java:200) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at java.util.concurrent.FutureTask$Sync.innerSetException(FutureTask.java:273) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at java.util.concurrent.FutureTask.setException(FutureTask.java:124) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:307) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at java.util.concurrent.FutureTask.run(FutureTask.java:137) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1068) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:561) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at java.lang.Thread.run(Thread.java:1096) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): Caused by: android.database.sqlite.SQLiteException: no such column: raw_contact_id: , while compiling: SELECT account_name, account_type, sourceid, version, dirty, data_id, res_package, mimetype, data1, data2, data3, data4, data5, data6, data7, data8, data9, data10, data11, data12, data13, data14, data15, data_sync1, data_sync2, data_sync3, data_sync4, _id, is_primary, is_super_primary, data_version, group_sourceid, sync1, sync2, sync3, sync4, deleted, contact_id, starred, is_restricted FROM contact_entities_view WHERE (1) AND (raw_contact_id=10) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.database.sqlite.SQLiteProgram.native_compile(Native Method) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.database.sqlite.SQLiteProgram.compile(SQLiteProgram.java:110) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.database.sqlite.SQLiteProgram.(SQLiteProgram.java:59) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.database.sqlite.SQLiteQuery.(SQLiteQuery.java:49) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.database.sqlite.SQLiteDirectCursorDriver.query(SQLiteDirectCursorDriver.java:49) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.database.sqlite.SQLiteDatabase.rawQueryWithFactory(SQLiteDatabase.java:1221) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.database.sqlite.SQLiteQueryBuilder.query(SQLiteQueryBuilder.java:316) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at com.android.providers.contacts.ContactsProvider2.query(ContactsProvider2.java:3850) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at com.android.providers.contacts.ContactsProvider2.query(ContactsProvider2.java:3840) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at com.android.providers.contacts.ContactsProvider2$RawContactsEntityIterator.(ContactsProvider2.java:4498) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at com.android.providers.contacts.ContactsProvider2.queryEntities(ContactsProvider2.java:4751) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.content.ContentProvider$Transport.queryEntities(ContentProvider.java:140) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.content.ContentProviderClient.queryEntities(ContentProviderClient.java:98) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.content.ContentResolver.queryEntities(ContentResolver.java:296) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at com.android.contacts.model.EntitySet.fromQuery(EntitySet.java:72) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at com.android.contacts.ui.EditContactActivity$QueryEntitiesTask.doInBackground(EditContactActivity.java:191) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at com.android.contacts.ui.EditContactActivity$QueryEntitiesTask.doInBackground(EditContactActivity.java:154) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at com.android.contacts.util.WeakAsyncTask.doInBackground(WeakAsyncTask.java:45) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at android.os.AsyncTask$2.call(AsyncTask.java:185) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:305) 05-07 15:35:59.295: ERROR/AndroidRuntime(13137): ... 4 more 05-07 15:35:59.303: INFO/Process(1013): Sending signal. PID: 13137 SIG: 3 05-07 15:35:59.303: INFO/dalvikvm(13137): threadid=7: reacting to signal 3 05-07 15:35:59.303: ERROR/dalvikvm(13137): Unable to open stack trace file '/data/anr/traces.txt': Permission denied 05-07 15:35:59.506: INFO/DumpStateReceiver(1013): Added state dump to 1 crashes 05-07 15:36:07.053: DEBUG/dalvikvm(12901): GC freed 389 objects / 25056 bytes in 145ms 05-07 15:36:17.287: DEBUG/dalvikvm(11649): GC freed 154 objects / 6816 bytes in 136ms 05-07 15:36:22.365: DEBUG/dalvikvm(13574): GC freed 348 objects / 67848 bytes in 112ms 05-07 15:36:27.451: DEBUG/dalvikvm(11836): GC freed 267 objects / 17432 bytes in 65ms 05-07 15:36:32.553: DEBUG/dalvikvm(12757): GC freed 1888 objects / 92440 bytes in 67ms 05-07 15:36:38.803: INFO/power(1013): * set_screen_state 0 05-07 15:36:38.813: DEBUG/SurfaceFlinger(1013): About to give-up screen, flinger = 0x114c30 05-07 15:36:38.826: DEBUG/Sensors(1013): using accelerometer (name=accelerometer) 05-07 15:36:38.834: DEBUG/PhoneWindow(13137): couldn't save which view has focus because the focused view android.widget.ScrollView@44883558 has no id. 05-07 15:36:38.865: DEBUG/WifiService(1013): ACTION_SCREEN_OFF 05-07 15:36:38.889: DEBUG/WifiService(1013): setting ACTION_DEVICE_IDLE timer for 900000ms 05-07 15:36:44.107: DEBUG/dalvikvm(1013): GC freed 7351 objects / 521440 bytes in 130ms 05-07 15:36:49.373: DEBUG/dalvikvm(13553): GC freed 321 objects / 12056 bytes in 102ms The no such column: raw_contact_id: looks like the issue but I'm not sure how or why that would happen or what it means. Any help appreciated! [email protected]

    Read the article

  • Implementing a robust async stream reader for a console

    - by Jon
    I recently provided an answer to this question: C# - Realtime console output redirection. As often happens, explaining stuff (here "stuff" was how I tackled a similar problem) leads you to greater understanding and/or, as is the case here, "oops" moments. I realized that my solution, as implemented, has a bug. The bug has little practical importance, but it has an extremely large importance to me as a developer: I can't rest easy knowing that my code has the potential to blow up. Squashing the bug is the purpose of this question. I apologize for the long intro, so let's get dirty. I wanted to build a class that allows me to receive input from a Stream in an event-based manner. The stream, in my scenario, is guaranteed to be a FileStream and there is also an associated StreamReader already present to leverage. The public interface of the class is this: public class MyStreamManager { public event EventHandler<ConsoleOutputReadEventArgs> StandardOutputRead; public void StartSendingEvents(); public void StopSendingEvents(); } Obviously this specific scenario has to do with a console's standard output. StartSendingEvents and StopSendingEvents do what they advertise; for the purposes of this discussion, we can assume that events are always being sent without loss of generality. The class uses these two fields internally: protected readonly StringBuilder inputAccumulator = new StringBuilder(); protected readonly byte[] buffer = new byte[256]; The functionality of the class is implemented in the methods below. To get the ball rolling: public void StartSendingEvents(); { this.stopAutomation = false; this.BeginReadAsync(); } To read data out of the Stream without blocking, and also without requiring a carriage return char, BeginRead is called: protected void BeginReadAsync() { if (!this.stopAutomation) { this.StandardOutput.BaseStream.BeginRead( this.buffer, 0, this.buffer.Length, this.ReadHappened, null); } } The challenging part: BeginRead requires using a buffer. This means that when reading from the stream, it is possible that the bytes available to read ("incoming chunk") are larger than the buffer. Since we are only handing off data from the stream to a consumer, and that consumer may well have inside knowledge about the size and/or format of these chunks, I want to call event subscribers exactly once for each chunk. Otherwise the abstraction breaks down and the subscribers have to buffer the incoming data and reconstruct the chunks themselves using said knowledge. This is much less convenient to the calling code, and detracts from the usefulness of my class. Edit: There are comments below correctly stating that since the data is coming from a stream, there is absolutely nothing that the receiver can infer about the structure of the data unless it is fully prepared to parse it. What I am trying to do here is leverage the "flush the output" "structure" that the owner of the console imparts while writing on it. I am prepared to assume (better: allow my caller to have the option to assume) that the OS will pass me the data written between two flushes of the stream in exactly one piece. To this end, if the buffer is full after EndRead, we don't send its contents to subscribers immediately but instead append them to a StringBuilder. The contents of the StringBuilder are only sent back whenever there is no more to read from the stream (thus preserving the chunks). private void ReadHappened(IAsyncResult asyncResult) { var bytesRead = this.StandardOutput.BaseStream.EndRead(asyncResult); if (bytesRead == 0) { this.OnAutomationStopped(); return; } var input = this.StandardOutput.CurrentEncoding.GetString( this.buffer, 0, bytesRead); this.inputAccumulator.Append(input); if (bytesRead < this.buffer.Length) { this.OnInputRead(); // only send back if we 're sure we got it all } this.BeginReadAsync(); // continue "looping" with BeginRead } After any read which is not enough to fill the buffer, all accumulated data is sent to the subscribers: private void OnInputRead() { var handler = this.StandardOutputRead; if (handler == null) { return; } handler(this, new ConsoleOutputReadEventArgs(this.inputAccumulator.ToString())); this.inputAccumulator.Clear(); } (I know that as long as there are no subscribers the data gets accumulated forever. This is a deliberate decision). The good This scheme works almost perfectly: Async functionality without spawning any threads Very convenient to the calling code (just subscribe to an event) Maintains the "chunkiness" of the data; this allows the calling code to use inside knowledge of the data without doing any extra work Is almost agnostic to the buffer size (it will work correctly with any size buffer irrespective of the data being read) The bad That last almost is a very big one. Consider what happens when there is an incoming chunk with length exactly equal to the size of the buffer. The chunk will be read and buffered, but the event will not be triggered. This will be followed up by a BeginRead that expects to find more data belonging to the current chunk in order to send it back all in one piece, but... there will be no more data in the stream. In fact, as long as data is put into the stream in chunks with length exactly equal to the buffer size, the data will be buffered and the event will never be triggered. This scenario may be highly unlikely to occur in practice, especially since we can pick any number for the buffer size, but the problem is there. Solution? Unfortunately, after checking the available methods on FileStream and StreamReader, I can't find anything which lets me peek into the stream while also allowing async methods to be used on it. One "solution" would be to have a thread wait on a ManualResetEvent after the "buffer filled" condition is detected. If the event is not signaled (by the async callback) in a small amount of time, then more data from the stream will not be forthcoming and the data accumulated so far should be sent to subscribers. However, this introduces the need for another thread, requires thread synchronization, and is plain inelegant. Specifying a timeout for BeginRead would also suffice (call back into my code every now and then so I can check if there's data to be sent back; most of the time there will not be anything to do, so I expect the performance hit to be negligible). But it looks like timeouts are not supported in FileStream. Since I imagine that async calls with timeouts are an option in bare Win32, another approach might be to PInvoke the hell out of the problem. But this is also undesirable as it will introduce complexity and simply be a pain to code. Is there an elegant way to get around the problem? Thanks for being patient enough to read all of this.

    Read the article

< Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >