Search Results

Search found 16794 results on 672 pages for 'memory usage'.

Page 540/672 | < Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >

• ZFS pool broken after upgrading to 14.04 LTS

  - by cruiserparts

  Well, I have been putting off upgrading to 14.04 for fear that I would break something. Actually for fear that it would break zfs (or I would break it). I am bascially slightly better than novice at linux. Spent the last couple of hours trying to get the pool back. Now I am at the stage where I don't think I have a complete failure, but I am worried that I may break it. So if could help me not break it, and recover it, I would be thankful. My zfs is file storage and not boot. It was working fine for a year and was working perfectly before the upgrade (scrub and everything was fine). I was confident that the upgrade would work (or at least I could fix it) because I had upgraded once in the past, the pool went missing, but I was able to get it back. I have reinstalled zfs, zfs utilities, and some dependencies (after searching this forum) I think what happened is 14.04 deleted some config file, or specified disk names differntly, but I could be wrong. When I set the pool up originally, I was using specific device Ids as I recall (because I did not want to break things if they got reassigned at boot) So see if this helps. I can confirm that old mountpoint folders are there but empty. no talloc stackframe at ../source3/param/loadparm.c:4864, leaking memory pool: naspool1 state: UNAVAIL status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM naspool1 UNAVAIL 0 0 0 insufficient replicas raidz1-0 UNAVAIL 0 0 0 insufficient replicas scsi-SATA_WDC_WD1001FALS-_WD-WMATV0990825 UNAVAIL 0 0 0 scsi-SATA_WDC_WD1001FALS-_WD-WMATV2995365 UNAVAIL 0 0 0 scsi-SATA_WDC_WD10EARS-00_WD-WMAV51894349 UNAVAIL 0 0 0 ___@ourserver:~$ sudo zpool import naspool1 cannot import 'naspool1': a pool with that name is already created/imported, and no additional pools with that name were found ___@ourserver:~$ sudo zfs list no datasets available What other output can I post to help? I'm thinking the update deleted some zfs config files. It seems like the pool exists and certainly 3 perfectly working disks did not fail at once. I am worried that I may break something without a little bit of guideance. Thanks.

  Read the article

• Understanding the Customer Form in Release 12 from an AR Perspective!!

  - by user793553

  Confused by the Customer Form in Release 12??  Read on, to get some insight into the evolution of this screen, and how it links in with Trading Community Architecture. Historically, the customer data model was owned by Oracle Receivables (AR).  However, as the data model changed and more complex relationships and attributes had to be tracked and monitored, the Trading Community Architecture (TCA) product was created.  All applications within the E-Business suite that require interaction with a customer integrate with TCA. Customer information is no longer stored in the individual applications but rather in a central repository/registry maintained within TCA.  It is important to understand the following entities/concepts stored in TCA: Party: A party is an entity with whom you can have a potential business relationship.  A party can be either a Person or an Organization.  The Party entity is completely independent of any business relationship; this means that a Party can exist even if you have no transactions with it.   The Party is the "umbrella" entity under which you capture all other attributes listed below. Customer: A customer is a party with whom you have an existing business relationship.  From an AR perspective, you can simplify the concepts by thinking of a Customer as a Party. This definition however does not apply to all other applications. In the Oracle Receivables Customer form, the information displayed at the Customer level is from TCA's Party information record. Customer Account (also called Account): An account contains information about how you transact business with a particular customer.  You can create multiple accounts for a customer.  When you create invoices and receipts you associate it to a particular Account of a Customer. Location: A Location is an address.  It is a point in space, typically identified by a street number, a street name, a city, a state or province, a country.  A location is independent of what it is used for - you do not associate a purpose to a location. Party Site: A Party Site is associated to a Party.  It is the location where a party is physically located.  When defining sites for a Party, only one can be an identifying address.  However, you can define other party sites associated to a party. You can define purposes/usage for Party Sites. Account Site: An Account Site is associated to a Customer Account. It is the location associated to the account you are transacting business with. You can define business purposes (also called site uses) for an Account site. Read more about the Customer Workbench in these notes: Doc ID 1436547.1 Oracle Receivables: Understanding the Customer Form in Release 12 Doc ID  1437866.1 Customer Form - Address: Troubleshooting, Known Issues and Patches Doc ID  1448442.1 Oracle Receivables (AR): Customer Workbench Information Center Do you find this type of blog entry useful?  Please add comments to let us know how we can help you more effectively.  Thank you!

  Read the article

• Simple OpenGL program major slow down at high resolution

  - by Grieverheart

  I have created a small OpenGL 3.3 (Core) program using freeglut. The whole geometry is two boxes and one plane with some textures. I can move around like in an FPS and that's it. The problem is I face a big slow down of fps when I make my window large (i.e. above 1920x1080). I have monitors GPU usage when in full-screen and it shows GPU load of nearly 100% and Memory Controller load of ~85%. When at 600x600, these numbers are at about 45%, my CPU is also at full load. I use deferred rendering at the moment but even when forward rendering, the slow down was nearly as severe. I can't imagine my GPU is not powerful enough for something this simple when I play many games at 1080p (I have a GeForce GT 120M btw). Below are my shaders, First Pass #VS #version 330 core uniform mat4 ModelViewMatrix; uniform mat3 NormalMatrix; uniform mat4 MVPMatrix; uniform float scale; layout(location = 0) in vec3 in_Position; layout(location = 1) in vec3 in_Normal; layout(location = 2) in vec2 in_TexCoord; smooth out vec3 pass_Normal; smooth out vec3 pass_Position; smooth out vec2 TexCoord; void main(void){ pass_Position = (ModelViewMatrix * vec4(scale * in_Position, 1.0)).xyz; pass_Normal = NormalMatrix * in_Normal; TexCoord = in_TexCoord; gl_Position = MVPMatrix * vec4(scale * in_Position, 1.0); } #FS #version 330 core uniform sampler2D inSampler; smooth in vec3 pass_Normal; smooth in vec3 pass_Position; smooth in vec2 TexCoord; layout(location = 0) out vec3 outPosition; layout(location = 1) out vec3 outDiffuse; layout(location = 2) out vec3 outNormal; void main(void){ outPosition = pass_Position; outDiffuse = texture(inSampler, TexCoord).xyz; outNormal = pass_Normal; } Second Pass #VS #version 330 core uniform float scale; layout(location = 0) in vec3 in_Position; void main(void){ gl_Position = mat4(1.0) * vec4(scale * in_Position, 1.0); } #FS #version 330 core struct Light{ vec3 direction; }; uniform ivec2 ScreenSize; uniform Light light; uniform sampler2D PositionMap; uniform sampler2D ColorMap; uniform sampler2D NormalMap; out vec4 out_Color; vec2 CalcTexCoord(void){ return gl_FragCoord.xy / ScreenSize; } vec4 CalcLight(vec3 position, vec3 normal){ vec4 DiffuseColor = vec4(0.0); vec4 SpecularColor = vec4(0.0); vec3 light_Direction = -normalize(light.direction); float diffuse = max(0.0, dot(normal, light_Direction)); if(diffuse 0.0){ DiffuseColor = diffuse * vec4(1.0); vec3 camera_Direction = normalize(-position); vec3 half_vector = normalize(camera_Direction + light_Direction); float specular = max(0.0, dot(normal, half_vector)); float fspecular = pow(specular, 128.0); SpecularColor = fspecular * vec4(1.0); } return DiffuseColor + SpecularColor + vec4(0.1); } void main(void){ vec2 TexCoord = CalcTexCoord(); vec3 Position = texture(PositionMap, TexCoord).xyz; vec3 Color = texture(ColorMap, TexCoord).xyz; vec3 Normal = normalize(texture(NormalMap, TexCoord).xyz); out_Color = vec4(Color, 1.0) * CalcLight(Position, Normal); } Is it normal for the GPU to be used that much under the described circumstances? Is it due to poor performance of freeglut? I understand that the problem could be specific to my code, but I can't paste the whole code here, if you need more info, please tell me.

  Read the article

• Oracle Solaris Crash Analysis Tool 5.3 now available

  - by user12609056

  Oracle Solaris Crash Analysis Tool 5.3 The Oracle Solaris Crash Analysis Tool Team is happy to announce the availability of release 5.3.  This release addresses bugs discovered since the release of 5.2 plus enhancements to support Oracle Solaris 11 and updates to Oracle Solaris versions 7 through 10. The packages are available on My Oracle Support - simply search for Patch 13365310 to find the downloadable packages. Release Notes General blast support The blast GUI has been removed and is no longer supported. Oracle Solaris 2.6 Support As of Oracle Solaris Crash Analysis Tool 5.3, support for Oracle Solaris 2.6 has been dropped. If you have systems running Solaris 2.6, you will need to use Oracle Solaris Crash Analysis Tool 5.2 or earlier to read its crash dumps. New Commands Sanity Command Though one can re-run the sanity checks that are run at tool start-up using the coreinfo command, many users were unaware that they were. Though these checks can still be run using that command, a new command, namely sanity, can now be used to re-run the checks at any time. Interface Changes scat_explore -r and -t option The -r option has ben added to scat_explore so that a base directory can be specified and the -t op[tion was added to enable color taggging of the output. The scat_explore sub-command now accepts new options. Usage is: scat --scat_explore [-atv] [-r base_dir] [-d dest] [unix.N] [vmcore.]N Where: -v Verbose Mode: The command will print messages highlighting what it's doing. -a Auto Mode: The command does not prompt for input from the user as it runs. -d dest Instructs scat_explore to save it's output in the directory dest instead of the present working directory. -r base_dir Instructs scat_explore to save it's under the directory base_dir instead of the present working directory. If it is not specified using the -d option, scat_explore names it's output file as "scat_explore_system_name_hostid_lbolt_value_corefile_name." -t Enable color tags. When enabled, scat_explore tags important text with colors that match the level of importance. These colors correspond to the color normally printed when running Oracle Solaris Crash Analysis Tool in interactive mode. Tag Name Definition FATAL An extremely important message which should be investigated. WARNING A warning that may or may not have anything to do with the crash. ERROR An error, usually printer with a suggested command ALERT Used to indicate something the tool discovered. INFO Purely informational message INFO2 A follow-up to an INFO tagged message REDZONE Usually used when prnting memory info showing something is in the kernel's REDZONE. N The number of the crash dump. Specifying unix.N vmcore.N is optional and not required. Example: $ scat --scat_explore -a -v -r /tmp vmcore.0 #Output directory: /tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 #Tar filename: scat_explore_oomph_833a2959_0x28800_vmcore.0.tar #Extracting crash data... #Gathering standard crash data collections... #Panic string indicates a possible hang... #Gathering Hang Related data... #Creating tar file... #Compressing tar file... #Successful extraction SCAT_EXPLORE_DATA_DIR=/tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 Sending scat_explore results The .tar.gz file that results from a scat_explore run may be sent using Oracle Secure File Transfer. The Oracle Secure File Transfer User Guide describes how to use it to send a file. The send_scat_explore script now has a -t option for specifying a to address for sending the results. This option is mandatory. Known Issues There are a couple known issues that we are addressing in release 5.4, which you should expect to see soon: Display of timestamps in threads and clock information is incorrect in some cases. There are alignment issues with some of the tables produced by the tool.

  Read the article

• WebCenter Customer Spotlight: Hitachi Data Systems

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter Watch this Webcast to see a live demo on how HDS creates multilingual content for their 35+ regional websites  Solution SummaryHitachi Data Systems (HDS) provides mid-range and high-end storage systems, software and services. It is a wholly owned subsidiary of Hitachi Ltd. HDS is based in Santa Clara, California, and has over 5,300 employees in more then 100 countries and regions. HDS's main objectives were to provide a consistent message across all their sites, to maintain a tight governance structure across their messages and related content, expand the use of the existing content management systems and implement a centralized translation management system. HDS implemented a global web content management system based on Oracle WebCenter Content and integrated the Lingotek translation management system to manage their multilingual content. The implemented solution provides each Geo with the ability to expand their web offering to meet local market needs, while staying aligned with the Corporate Web Guidelines Company OverviewHitachi Data Systems (HDS) provides mid-range and high-end storage systems, software and services. It is a wholly owned subsidiary of Hitachi Ltd. and part of the Hitachi Information Systems & Telecommunications Division. The company sells through direct and indirect channels in more than 170 countries and regions. Its customers include of 50 percent of the Fortune 100 companies. HDS is based in Santa Clara California and has over 5,300 employees in more than 100 countries and regions. Business ChallengesHDS has over 35 global websites and the lack of global web capabilities led to inconsistency of messaging, slower time to market and failed to address local language needs. There was an extensive operational overhead due to manual and redundant processes. Translation efforts where superficial, inconsistent and wasteful and the lack of translation automation tools discouraged localization.  HDS's main objectives were to provide a consistent message across all their sites, to maintain a tight governance structure across their messages and related content, expand the use of the existing content management systems and implement a centralized translation management system. Solution DeployedHDS implemented a global web content management system based on Oracle WebCenter Content. The solution supports decentralized publishing for their 35+ global sites to address local market needs while ensuring editorial and brand review trough embedded review processes. They integrated the Lingotek translation management system into Oracle WebCenter Content to manage their multilingual content. Business Results Provides each Geo with the ability to expand their web offering to meet local market needs, while staying aligned with the Corporate Web Guidelines Enables end-to-end content lifecycle management across multiple languages Leverage translation memory for reuse and consistency Reduce time to market with central repository of translated content Additional Information HDS Webcast Oracle WebCenter Content Lingotek website

  Read the article

• Cannot get 3D OpenGL support in Vmware guests, how can I fix this?

  - by jjapol

  I have been working at this problem for 2 days now. I cannot for the life of me enable 3D support in VMWare 9 guests. My specifications are: Hardware: Dell Latitude E5520 laptop. Processor: Intel i7-2620M CPU @ 2.70GHz × 4. Memory: 8GB. Video: Intel Sandybridge Mobile x86/MMX/SSE2 OS: Ubuntu 12.04.1 LTS, 32 bit. Vmware Workstation: 9.0.1 build-894247 Glxgears functions fine. Frame rate is ~60fps. Vmware guest: Windows 7 Starting the Windows 7 guest in VMware throws the following errors: No 3D support is available from the host. and Hardware graphics acceleration is not available. I've read through this VMware forum thread, but again the hardware in the post is different (nVidia). I've followed the instructions at this Ask Ubuntu post as closely as possible as the question is nearly the same as mine although my hardware is different. Answer 1 regarding setting mks.gl.allowBlacklistedDrivers = TRUE; in my vmx configuration file causes the VM to crash when it starts. The second answer I followed as closely as possible. I uninstalled VMware, Did sudo apt-get install build-essential linux-headers-$(uname -r) at a terminal, Added the PPA https://launchpad.net/~glasen/+archive/intel-driver, Then at a terminal did sudo apt-get update && sudo apt-get upgrade -y I reinstalled VMware and have the same results: no 3D in guests. I'm getting the feeling that something is awry with the Sandy Bridge driver, but I can't seem to come up with any solutions. Has anyone out there run across this problem also? By the way, the operation of the likes of Solidworks and AutoCad within a Windpws 7 guest does appear to be improved in VMware 9 vs VMware 8 in spite of the fact that 3D support is lacking in the Windows 7 guest. I'd also add that my glxinfo file was nearly identical to the glxinfo file posted at askubuntu.com/questions/181829/…. I had a total of seven minor differences per a comparison using Meld. –

  Read the article

• Need help fixing DPKG errors after update from 12.04 to 12.10

  - by James Wulfe

  So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" It should also be noted that it is just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy. Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I would also like to note i have cleaned apt cashe both through the terminal and manualy, i have tried installing them manually through dpkg from both the /var/cache/apt/archives/ location and from my own manually downloaded .deb files. i have tried using dpkg-reconfigure and i have used bleachbit to clean my system. I have also tested both my HDD and memory and found no significant errors to lead to the input/output errors. Quite frankly i am just out of options and have grown tired of trying to google a solution to this mess but still do not wish to pursue backing up settings and reinstalling the system. Any help would be appreciated. I am only interested in answers, please leave your feeling towards grammar, punctuation, and bias towards how a "post should look" at the door. If you dont have something to contribute towards solving my problem then you are just doing nothing but contributing to it. Thank you.

  Read the article

• Efficient inline templates and C++

  - by Darryl Gove

  I've talked before about calling inline templates from C++, I've also talked about calling inline templates efficiently. This time I want to talk about efficiently calling inline templates from C++. The obvious starting point is that I need to declare the inline templates as being extern "C": extern "C" { int mytemplate(int); } This enables us to call it, but the call may not be very efficient because the compiler will treat it as a function call, and may produce suboptimal code based on that premise. So we need to add the no_side_effect pragma: extern "C" { int mytemplate(int); #pragma no_side_effect(mytemplate) } However, this may still not produce optimal code. We've discussed how the no_side_effect pragma cannot be combined with exceptions, well we know that the code cannot produce exceptions, but the compiler doesn't know that. If we tell the compiler that information it may be able to produce even better code. We can do this by adding the "throw()" keyword to the template declaration: extern "C" { int mytemplate(int) throw(); #pragma no_side_effect(mytemplate) } The following is an example of how these changes might improve performance. We can take our previous example code and migrate it to C++, adding the use of a try...catch construct: #include <iostream extern "C" { int lzd(int); #pragma no_side_effect(lzd) } int a; int c=0; class myclass { int routine(); }; int myclass::routine() { try { for(a=0; a<1000; a++) { c=lzd(c); } } catch(...) { std::cout << "Something happened" << std::endl; } return 0; } Compiling this produces a slightly suboptimal code sequence in the hot loop: $ CC -O -xtarget=T4 -S t.cpp t.il ... /* 0x0014 23 */ lzd %o0,%o0 /* 0x0018 21 */ add %l6,1,%l6 /* 0x001c */ cmp %l6,1000 /* 0x0020 */ bl,pt %icc,.L77000033 /* 0x0024 23 */ st %o0,[%l7] There's a store in the delay slot of the branch, so we're repeatedly storing data back to memory. If we change the function declaration to include "throw()", we get better code: $ CC -O -xtarget=T4 -S t.cpp t.il ... /* 0x0014 21 */ add %i1,1,%i1 /* 0x0018 23 */ lzd %o0,%o0 /* 0x001c 21 */ cmp %i1,999 /* 0x0020 */ ble,pt %icc,.L77000019 /* 0x0024 */ nop The store has gone, but the code is still suboptimal - there's a nop in the delay slot rather than useful work. However, it's good enough for this example. The point I'm making is that the compiler produces the better code with both the "throw()" and the no side effect pragma.

  Read the article

• eSTEP Newsletter October 2012 now available

  - by uwes

  Dear Partners,We would like to inform you that the October '12 issue of our Newsletter is now available.The issue contains information to the following topics:News from CorpOracle Announces Oracle Solaris 11.1 at Oracle OpenWorld; Oracle Announces Oracle Exadata X3 Database In-Memory Machine; Oracle Enterprise Manager 12c introduces New Tools and Programs for Partners; Oracle Unveils First Industry-Specific Engineered System - the Oracle Networks Applications Platform,;  Oracle Unveils Expanded Oracle Cloud Offerings; Oracle Outlines Plans to Make the Future Java During JavaOne 2012 Strategy Keynote; Some interesting Java Facts and Figures; Oracle Announces MySQL 5.6 Release Candidate Technical Section What's up with LDoms (4 tech articles); Oracle SPARC T4 Systems cut Complexity, cost of Cryptographic Tasks; PeopleSoft Enterprise Financials 9.1; PeopleSoft HCM 9.1 combined online and batch benchmark,; Product Update Bulletin Oracle Solaris Cluster Oct 2012; Sun ZFS Storage 7420; SPARC Product Line Update; SPARC M-series -  New DAT 160 plus EOL of M3000 series; SPARC SuperCluster and SPARC T4 Servers Included in Enterprise Reference Architecture Sizing Tool; Oracle MagazineLearning & EventsRecently delivered Techcasts: An Update after the Oracle Open World, An Update on OVM Server for SPARC; Update to Oracle Database ApplianceReferencesBridgestone Aircraft Tire Reduces Required Disk Capacity by 50% with Virtualized Storage Solution; Fiat Group Automobiles Aligns Operational Decisions with Strategy by Using End-to-End Enterprise Performance Management System; Birkbeck, University of London Develops World-Class Computer Science Facilities While Reducing Costs with Ultrareliable and Scalable Data Infrastructure How toIntroducing Oracle System Assistant; How to Prepare a ZFS Storage Appliance to Serve as a Storage Device; Migrating Oracle Solaris 8 P2V with Oracle Database 10.2 and ASM; White paper on Best Practices for Building a Virtualized SPARC Computing Environment, How to extend the Oracle Solaris Studio IDE with NetBeans Plug-Ins; How I simplified Oracle Database 11g Installation on Oracle Linux 6You find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below.URL: http://launch.oracle.com/PIN: eSTEP_2011Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab. Feel free to explore and any feedback is appreciated to help us improve the service and information we deliver.Thanks and best regards,Partner HW Enablement EMEA

  Read the article

• HDMI sound gone, can't figure out how to turn it back on

  - by Oli

  I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

  Read the article

• I can't install Ubuntu 12.04.1 on iMac G5

  - by user89004

  So, I have this iMac G5 that doesn't have iSight, only a small light sensor I think undernieth, machine model 8.2. I tried burning a Ubuntu 12.04.1 PowerPC 64bit .iso to a cd but the computer just won't boot it, I don't know why. Next I tried with a USB but it wouldn't let me boot that either, I created the usb on my dad's win7 laptop as the process was way easier than on freakin Mac or Ubuntu (no command typing AT ALL on windows) I'm able to get into openfirmware and type boot usb and it does show some weird writing that scrolls so fast I can't see anything and then it just gives me this huge no sign like a stop sign and freezez. The sign is grey and the line in the middle is tilted towards the left. An other issue I'm having with hdiutil is that I can't convert the stupid .iso I just downloaded into a .img because the file keeps on dissapearing right when it's done converting it. I used the syntax from Ubuntu support how to create a bootable usb drive under Mac OS X. I even didn't include the 2 stupid ~ that are shown in the syntax that are completly worthless, God only know why they put them there, and I even tried running the whole thing as root with sudo su before the command. The funny thing is that if I convert something smaller it works. The command I was using is hdiutil convert -format UDRW -o /path/to/target.img /path/to/ubuntu.iso I even tried hdiutil convert /path/to/ubuntu.iso -format UDRW -o /path/to/target.img but the same thing happens, the dummy .img.dmg file dissapears when the conversion is done no matter where I set the output file to go. I have tried several different folders, the same thing happens with all of them. I also tried burning a Ubuntu mini iso on a cd, can't remember if it was 11.10 or 12.10 but even thoguh holding c when the iMac boots up does show me the cd and I can boot from it, I get this weird error upon hitting install, it says something like invalid memory access, release keys and error strings I can't read. I don't have any original DVDs from this iMac and can't run hardware diagnostics. WHatever option I try at the command prompt from the mini ubuntu cd I get the same result, error code and openfirmware backdrop that's frozen. I noticed that the pen drive I created on my dads Win7 laptop is formated with MS-DOS but I can still mount it no problem, so it shouldn't have a problem booting it, right? I used the advice on ubuntu.com to make it, from here. Also, my partition is HFS+ so I can't use it as a hard drive and boot from it. I don' have 2 partitions either, just one HDD, one partition. Please help!!!

  Read the article

• Asynchrony in C# 5 (Part I)

  - by javarg

  I’ve been playing around with the new Async CTP preview available for download from Microsoft. It’s amazing how language trends are influencing the evolution of Microsoft’s developing platform. Much effort is being done at language level today than previous versions of .NET. In these post series I’ll review some major features contained in this release: Asynchronous functions TPL Dataflow Task based asynchronous Pattern Part I: Asynchronous Functions This is a mean of expressing asynchronous operations. This kind of functions must return void or Task/Task<> (functions returning void let us implement Fire & Forget asynchronous operations). The two new keywords introduced are async and await. async: marks a function as asynchronous, indicating that some part of its execution may take place some time later (after the method call has returned). Thus, all async functions must include some kind of asynchronous operations. This keyword on its own does not make a function asynchronous thought, its nature depends on its implementation. await: allows us to define operations inside a function that will be awaited for continuation (more on this later). Async function sample: Async/Await Sample async void ShowDateTimeAsync() {     while (true)     {         var client = new ServiceReference1.Service1Client();         var dt = await client.GetDateTimeTaskAsync();         Console.WriteLine("Current DateTime is: {0}", dt);         await TaskEx.Delay(1000);     } } The previous sample is a typical usage scenario for these new features. Suppose we query some external Web Service to get data (in this case the current DateTime) and we do so at regular intervals in order to refresh user’s UI. Note the async and await functions working together. The ShowDateTimeAsync method indicate its asynchronous nature to the caller using the keyword async (that it may complete after returning control to its caller). The await keyword indicates the flow control of the method will continue executing asynchronously after client.GetDateTimeTaskAsync returns. The latter is the most important thing to understand about the behavior of this method and how this actually works. The flow control of the method will be reconstructed after any asynchronous operation completes (specified with the keyword await). This reconstruction of flow control is the real magic behind the scene and it is done by C#/VB compilers. Note how we didn’t use any of the regular existing async patterns and we’ve defined the method very much like a synchronous one. Now, compare the following code snippet  in contrast to the previuous async/await: Traditional UI Async void ComplicatedShowDateTime() {     var client = new ServiceReference1.Service1Client();     client.GetDateTimeCompleted += (s, e) =>     {         Console.WriteLine("Current DateTime is: {0}", e.Result);         client.GetDateTimeAsync();     };     client.GetDateTimeAsync(); } The previous implementation is somehow similar to the first shown, but more complicated. Note how the while loop is implemented as a chained callback to the same method (client.GetDateTimeAsync) inside the event handler (please, do not do this in your own application, this is just an example).  How it works? Using an state workflow (or jump table actually), the compiler expands our code and create the necessary steps to execute it, resuming pending operations after any asynchronous one. The intention of the new Async/Await pattern is to let us think and code as we normally do when designing and algorithm. It also allows us to preserve the logical flow control of the program (without using any tricky coding patterns to accomplish this). The compiler will then create the necessary workflow to execute operations as the happen in time.

  Read the article

• Configuring Full-Text Search for pdf and docx files

  - by Lukasz Kurylo

  I think in may I was creating a little filters module based on Full Text-Search. I have configured my dev machine, the same for two testing servers – in our company for internal testing before we deployed it to client, and then on the testing client server. Until last week this build  was still on the testing server and finally we got feedback that we can deploy it on the production one. I only say that, I lost half a day because I had not correctly remembered what I was doing to configure the FTS on the previous servers and I had no notes for that. I foolishly believed in my memory. Lesson learned.   For future reference a bunch of steps to configure the FTS for searching in *.pdf and *.docx files (and by the way in other Office files like *.xlsx).   1. From the page (link) download and install the *.pdf IFilter for FTS. 2. To the PATH global system variable add path to the catalog, where you installed the plugin. Default for this version is: C:\Program Files\Adobe\Adobe PDF iFilter 9 for 64-bit platforms\bin 3. From the page (link) download a FilterPackx64.exe and install it. 4. Now from SSMS execute the following procedures: -sp_fulltext_service 'load_os_resources',1 -sp_fulltext_service 'verify_signature', 0 5. Restart the server 6. Now we must check if the plugins are visible: -select document_type, path from sys.fulltext_document_types where document_type = '.pdf' -select document_type, path from sys.fulltext_document_types where document_type = '.docx' 7. If we see a result, then we can assume that everything is ok*. 8. Right now we can create a catalog for FTS and indexes on appropriate columns.     *I lost a lot of hours to find out, why the plugin for the *.pdf files wasn’t indexed any file in the database, but in the sys.fulltext_document_types table there was available a line for this plugin. After the deeper investigation I found that the *.pdf files actually were indexed. At least the EOF sign was added to the indexes and nothing more for each file. In the end the problem was that, I forgot to add the /bin in the path to the plugin in PATH variable..

  Read the article

• My collection of favourite TFS utilities

  - by Aaron Kowall

  So, you’re in charge of your company or team’s Team Foundation Server.  Wish it was easier to manage, administer, extend?  Well, here are a few utilities that I highly recommend looking at. I’ve recently had need to rebuild my laptop and upgrade my local TFS environment to TFS 2012 Update 1.  This gave me cause to enumerate some of the utilities I like to have on hand. One of the reasons I love to use TFS on projects is that it’s basically a complete ALM toolkit.  Everything from Task Management, Version Control, Build Management, Test Management, Metrics and Reporting are all there ‘in the box’.  However, no matter how complete a product set it, there are always ways to make it better.  Here are a list of utilities and libraries that are pretty generally useful.  this is not intended to be an exhaustive list of TFS extensions but rather a set that I recommend you look at.  There are many more out there that may be applicable in one scenario or another.  This set of tools should work with TFS 2012 or 2010 if you grab the right version. Most of these tools (and more) are available from the Visual Studio Gallery or CodePlex. General TFS Power Tools – This is ‘the’ collection of utilities and extensions delivered by the Product Group.  Highly recommended from here are the Best Practice Analyzer for ensuring your TFS implementation is healthy and the Team Foundation Server Backups to ensure your TFS databases are backed up correctly. TFS Administrators Toolkit – helps make updates to work item types and reports across many team projects.  Also provides visibility of disk usage by finding large files in version control or test attachments to assist in managing storage utilization. Version Control Git-TF - a set of cross-platform, command line tools that facilitate sharing of changes between TFS and Git. These tools allow a developer to use a local Git repository, and configure it to share changes with a TFS server.  Great for all Git lovers who must integrate into a TFS repository. Testing TFS 2012 Tester Power Tool – A utility for bulk copying test cases which assists in an approach for managing test cases across multiple releases.  A little plug that this utility was written and maintained by Anna Russo of Imaginet where I also work. Test Scribe - A documentation power tool designed to construct documents directly from the TFS for test plan and test run artifacts for the purpose of discussion, reporting etc. Reporting Community TFS Report Extensions - a single repository of SQL Server Reporting Services report for Team Foundation 2010 (and above).  Check out the Test Plan Status report by Imaginet’s Steve St. Jean.  Very valuable for your test managers. Builds TFS Build Manager – A great utility if you are build manager over a complex build environment with many TFS build definitions. Community TFS Build Extensions – contains many custom build activities.  Current release binaries are for TFS 2010 but many of the activities can be recompiled for use with TFS 2012. While compiling this list, I was surprised by the number of TFS utilities and extensions I no longer use/need in TFS 2012 because of the great work by the TFS team addressing many gaps since the 2010 release. Are there any utilities you depend on that I’ve missed?  I’d love to hear about them in the comments!

  Read the article

• How do I stop icons appearing on the desktop under conky?

  - by Seamus

  When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr}

  Read the article

• How to handle interruptions in developer work without losing concentration? [closed]

  - by tomaszs

  I work as a developer for some years now. Mainly the issue why it's antisocial work is because you need to spend much time programming. I've been always the kind of developer who likes to cut off from any sources of distraction and spend several hours on project because in this way i (as i hope) do it faster. There are also other kinds of developers, more social that can chat, read, watch movies while development and they are ok with this and don't hesitate to be interrupted in their work in any time and come back to the project without any problem. For me any distraction is source of frustration because i need to spend substantial time to load my mind with all info about the project and to concentrate back on the tasks. I always thought it's better to do this that way because project is completed faster. But it makes some things difficult: it's hard to chat with someone who needs to have some important info: because you are a bit frustrated when you know you loose your Zen. And sometimes its more important to chat with someone than to loose Zen. Well.. mostly in any other kind of work the ability to be "multitask" is very important. But as a developer and as a person it's also very important to stay social. And i see now that the problem of concentration makes it difficult to make the right chose: the cost of maintaining concentration is just sometimes so damn high! So is it only me that i have so little concentration skills so any interruption is for me a big deal? Maybe it's just i have so bad memory so that i dont remember all issues of a project so long? Or maybe i develop the project in a fashion that requires me to store so much info on my mind only to be able to start working with code? Or should i just accept that being more social will make me finish project slower and in the fashion that i personally consider non 100% productive? And it's just normal thing and i should just accept it and start to live like any other person who has many works and don't assume that programming is in any case other than any other work and i just do fuzz about the whole concentration thing? This is question for mid-pro developers. I think you was having the same dillema in your life. I would be glad if you could help me take the right road here because it's just driving me and i suppose people i work with crazy for years.

  Read the article

• Cloud Computing: Start with the problem

  - by BuckWoody

  At one point in my life I would build my own computing system for home use. I wanted a particular video card, a certain set of drives, and a lot of memory. Not only could I not find those things in a vendor’s pre-built computer, but those were more expensive – by a lot. As time moved on and the computing industry matured, I actually find that I can buy a vendor’s system as cheaply – and in some cases far more cheaply – than I can build it myself.   This paradigm holds true for almost any product, even clothing and furniture. And it’s also held true for software… Mostly. If you need an office productivity package, you simply buy one or use open-sourced software for that. There’s really no need to write your own Word Processor – it’s kind of been done a thousand times over. Even if you need a full system for customer relationship management or other needs, you simply buy one. But there is no “cloud solution in a box”.  Sure, if you’re after “Software as a Service” – type solutions, like being able to process video (Windows Azure Media Services) or running a Pig or Hive job in Hadoop (Hadoop on Windows Azure) you can simply use one of those, or if you just want to deploy a Virtual Machine (Windows Azure Virtual Machines) you can get that, but if you’re looking for a solution to a problem your organization has, you may need to mix Software, Infrastructure, and perhaps even Platforms (such as Windows Azure Computing) to solve the issue. It’s all about starting from the problem-end first. We’ve become so accustomed to looking for a box of software that will solve the problem, that we often start with the solution and try to fit it to the problem, rather than the other way around.  When I talk with my fellow architects at other companies, one of the hardest things to get them to do is to ignore the technology for a moment and describe what the issues are. It’s interesting to monitor the conversation and watch how many times we deviate from the problem into the solution. So, in your work today, try a little experiment: watch how many times you go after a problem by starting with the solution. Tomorrow, make a conscious effort to reverse that. You might be surprised at the results.

  Read the article

• Gauging Maturity of your BPM Strategy - part 1 / 2

  - by Sanjeev Sharma

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} In this post I will discuss the essence of maturity assessment and the business imperative for doing the same in the context of BPM. Social psychology purports that an individual progresses from being a beginner to an expert in a given activity or task along four stages of self-awareness: Unconscious Incompetence where the individual does not understand or know how to do something and does not necessarily recognize the deficit and may even deny the usefulness of the skill. Conscious Incompetence where the individual recognizes the deficit, as well as the value of a new skill in addressing the deficit. Conscious Competence where the individual understands or knows how to do something but demonstrating the skill requires explicit concentration. Unconscious Competence where the individual has had so much practice with a skill that it has become "second nature" and serves as a basis of developing other complementary skills. We can extend the above thinking to an organization as a whole by measuring an organization’s level of competence in a specific area or capability, as an aggregate of the competence levels of individuals it is comprised of. After all organizations too like individuals, evolve through experience, develop “memory” and capabilities that are shaped through a constant cycle of learning, un-learning and re-learning. Hence the key to organizational success lies in developing these capabilities to enable execution of its strategy in-line with the external environment i.e. demand, competition, economy etc. However developing a capability merits establishing a base line in order to Assess the magnitude of improvement from past investments Identify gaps and short-comings Prioritize future investments in the right areas A maturity assessment is essentially an organizational self-awareness check that is aimed at depicting the “as-is” snapshot of an existing capability in-order to guide future investments to develop that capability in-line with business goals. This effectively is the essence of a maturity Organizational capabilities stem through its architecture, routines, culture and intellectual resources that are implicitly and explicitly embedded in its business processes. Given that business processes underpin realization of organizational capabilities, is what has prompted business transformation and process management efforts. Thus, the BPM capability of an organization needs to be measured on an on-going basis to ensure delivery of its planned benefits. In my next post I will describe Oracle’s BPM Maturity assessment methodology.

  Read the article

• Monitor the Weather from Your Windows 7 Taskbar

  - by Asian Angel

  Keeping up with the weather forecast can be hard when you are extra busy with work. If you need a simple but nice looking way to integrate weather monitoring into your Taskbar then join us as we look at WeatherBar. Setting Up & Using WeatherBar To get started unzip the following files, place them in an appropriate “Program Files Folder”, and create a shortcut. When you start WeatherBar for the first time you will be presented with the following window and a random/default location. To get WeatherBar set up for your location there are only two settings to adjust (using the “Pencil & Gear Buttons”). Clicking on the “Pencil Button” will open up this small window…enter the name of your location and click “OK”. Next click on the “Gear Button” where you can choose the “Update Interval” and “Measurement Format” that best suits your needs. Click “OK” when finished and WeatherBar will be ready to go. That definitely looks nice. When you are finished viewing this window minimize it to the “Taskbar Icon” instead of clicking on the “Close Button”…otherwise the entire app will close. Left click on the “Taskbar Icon” to bring the window back up… Hovering the mouse over the “Taskbar Icon” provides a nice thumbnail of the weather forecast. Right clicking on the “Taskbar Icon” will display a nice mini forecast. Conclusion While WeatherBar may not be for everyone it does provide a nice easy way to monitor the weather from your “Taskbar” without taking up a lot of room. Links Download WeatherBar Similar Articles Productive Geek Tips Monitor the Weather for Your Location in ChromeCheck Weather Conditions in Real-time with Weather WatcherMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersTaskbar Eliminator Does What the Name Implies: Hides Your Windows TaskbarBring Misplaced Off-Screen Windows Back to Your Desktop (Keyboard Trick) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Failed to install GRUB on a separate '/boot' partition on a fake RAID 0 (12.04LTS)

  - by gerben

  I'm having some problems getting GRUB configured for Ubuntu 12.04LTS on a fake RAID 0. I can either get the GRUB rescue prompt at startup, or just a GRUB prompt but I cannot boot to Ubuntu manually. How can I configure the GRUB to actually use the Ubuntu install? The steps taken: Installing Ubuntu on fake raid The Ubuntu installer cannot install Ubuntu on the drive. After defining the partitions to use it fails with "Error: ???", pressing OK terminates the installer. Therefore, I used GParted to configure the partitions: /dev/mapper/sil_agadaccfacbg : (the RAID configuration, created partition): /dev/mapper/sil_agadaccfacbg1:ext2, 200MiB, (with 'boot' flag) /dev/mapper/sil_agadaccfacbg3:ext2, 67.75GiB, (which will contain Ubuntu) /dev/mapper/sil_agadaccfacbg2:extended, 1.00GiB, (for swap) Contains: /dev/mapper/sil_agadaccfacbg5: unknown Because of the fake-RAID, I already mounted the destination partitions before running the Ubuntu installer: > mkdir /mnt/boot > sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt/boot > mkdir /mnt/ubuntu > sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt/ubuntu In the installer I chose the following partition usage: /dev/mapper/sil_agadaccfacbg1 ext2, mount at /boot (209MB) /dev/mapper/sil_agadaccfacbg3 ext2, mount at / (72751MB) /dev/mapper/sil_agadaccfacbg5 swap Device for boot loader installation: /dev/mapper/sil_agadaccfacbg, linux device-mapper (striped) (74.0GB) This will install Ubuntu, but will fail to install GRUB (it seems to use /dev/sda no matter which one I choose) Installing GRUB with dpkg-reconfigure I followed this guide, but adapted it for two partitions: sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt/ubuntu sudo mount --bind /dev /mnt/ubuntu/dev sudo mount --bind /proc /mnt/ubuntu/proc sudo mount --bind /sys /mnt/ubuntu/sys sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt/boot sudo mount --bind /boot /mnt/boot sudo chroot /mnt/ubuntu dpkg-reconfigure grub-pc However, it does not ask where to install GRUB (I should choose /dev/mapper/sil_agadaccfacbg somewhere..) After reboot I get the GRUB rescue prompt with message no such device Installing GRUB with grub-install After the same mount commands as above, I continued with: > sudo grub-install --root-directory=/mnt/boot /dev/mapper/sil_agadaccfacbg This gives the following message: /usr/sbin/grub-probe: error: cannot find a device for /mnt/boot/boot/grub (is /dev mounted?) It does succeed when mounting just the boot partition : sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt sudo grub-install --root-directory=/mnt/ /dev/mapper/sil_agadaccfacbg This finishes with: Installation finished. No error reported. After reboot I get the GRUB console, with welcome text. Attempting to manually start Ubuntu: ls (hd0) (hd0,msdos3) : (Ubuntu install partition) (hd0,msdos1) : (Ubuntu boot partition) (hd1) (hd1,msdos1) : (Ubuntu live USB) ls (hd0,msdos3)/ contains: - vmlinuz - lib/ - tmp/ - initrd.img - mnt/ - var/ - proc/ - boot/ - root/ - etc/ - run/ - media/ - sbin/ - bin/ - selinux/ - dev/ - srv/ - home/ - sys/ ls (hd0,msdos1)/ contains: -grub/ -boot/ -initrd.img-3.8.0-29-generic -vmlinuz-3.8.0.29-generic -config-3.8 linux (hd0,msdos3)/vmlinuz This returns "error: out of disk" Installing GRUB on Ubuntu partition with grub-install > sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt > sudo grub-install --root-directory=/mnt/ /dev/mapper/sil_agadaccfacbg This finishes with message: > Installation finished. No error reported. After reboot get the message "error: out of disk" and the GRUB rescue prompt. Configuring GRUB with grub-mkconfig Attempting to run grub-mkconfig with different destinations results in the same message: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). Remarks: Initially I didn't use a separate /boot partition, but the GRUB install then also failed. Because some mention that a small partition at the beginning of the drive is necessary on old machines, I retried with a /boot partition This is a single boot (no other OS's installed/used)

  Read the article

• Personal Financial Management – The need for resuscitation

  - by Salil Ravindran

  Until a year or so ago, PFM (Personal Financial Management) was the blue eyed boy of every channel banking head. In an age when bank account portability is still fiction, PFM was expected to incentivise customers to switch banks. It still is, in some emerging economies, but if the state of PFM in matured markets is anything to go by, it is in a state of coma and badly requires resuscitation. Studies conducted around the year show an alarming decline and stagnation in PFM usage in mature markets. A Sept 2012 report by Aite Group – Strategies for PFM Success shows that 72% of users hadn’t used PFM and worse, 58% of them were not kicked about using it. Of the rest who had used it, only half did on a bank site. While there are multiple reasons for this lack of adoption, some are glaringly obvious. While pretty graphs and pie charts are important to provide a visual representation of my income and expense, it is simply not enough to encourage me to return. Static representation of data without any insightful analysis does not help me. Budgeting and Cash Flow is important but when I have an operative account, a couple of savings accounts, a mortgage loan and a couple of credit cards help me with what my affordability is in specific contexts rather than telling me I just busted my budget. Help me with relative importance of each budget category so that I know it is fine to go over budget on books for my daughter as against going over budget on eating out. Budget over runs and spend analysis are post facto and I am informed of my sins only when I return to online banking. That too, only if I decide to come to the PFM area. Fundamentally, PFM should be a part of my banking engagement rather than an analysis tool. It should be contextual so that I can make insight based decisions. So what can be done to resuscitate PFM? Amalgamation with banking activities – In most cases, PFM tools are integrated into online banking pages and they are like chapter 37 of a long story. PFM needs to be a way of banking rather than a tool. Available balances should shift to Spendable Balances. Budget and goal related insights should be integrated with transaction sessions to drive pre-event financial decisions. Personal Financial Guidance - Banks need to think ground level and see if their PFM offering is really helping customers achieve self actualisation. Banks need to recognise that most customers out there are non-proficient about making the best value of their money. Customers return when they know that they are being guided rather than being just informed on their finance. Integrating contextual financial offers and financial planning into PFM is one way ahead. Yet another way is to help customers tag unwanted spending thereby encouraging sound savings habits. Mobile PFM – Most banks have left all those numbers on online banking. With access mostly having moved to devices and the success of apps, moving PFM on to devices will give it a much needed shot in the arm. This is not only about presenting the same wine in a new bottle but also about leveraging the power of the device in pushing real time notifications to make pre-purchase decisions. The pursuit should be to analyse spend, budgets and financial goals real time and push them pre-event on to the device. So next time, I should know that I have over run my eating out budget before walking into that burger joint and not after. Increase participation and collaboration – Peer group experiences and comments are valued above those offered by the bank. Integrating social media into PFM engagement will let customers share and solicit their financial management experiences with their peer group. Peer comparisons help benchmark one’s savings and spending habits with those of the peer group and increases stickiness. While mature markets have gone through this learning in some way over the last one year, banks in maturing digital banking economies increasingly seem to be falling into this trap. Best practices lie in profiling and segmenting customers, being where they are and contextually guiding them to identify and achieve their financial goals. Banks could look at the likes of Simple and Movenbank to draw inpiration from.

  Read the article

• Is there a pedagogical game engine?

  - by K.G.

  I'm looking for a book, website, or other resource that gives modern 3D game engines the same treatment as Operating Systems: Design and Implementation gave operating systems. I have read Jason Gregory's Game Engine Architecture, which I enjoyed. However, by intent the author treated components of the architecture as atomic units, whereas what I'm interested in is the plumbing between those units that makes a coherent whole out of ideally loosely coupled parts. In books such as these, one usually reads that "that's academic," but that's the point! I have also read Julian Gold's Object-oriented Game Development, which likewise was good, but I feel is beginning to show its age. Since even mobile platforms these days are multicore and have fast video memory, those kinds of things (concurrency, display item buffering) would ideally be covered. There are other resources, such as the Doom 3 source code, which is highly instructive for its being a shipped product. The problem with those is as follows: float Q_rsqrt( float number ) { long i; float x2, y; const float threehalfs = 1.5F; x2 = number * 0.5F; y = number; i = * ( long * ) &y; // evil floating point bit level hacking i = 0x5f3759df - ( i >> 1 ); // what the f***? y = * ( float * ) &i; y = y * ( threehalfs - ( x2 * y * y ) ); // 1st iteration // y = y * ( threehalfs - ( x2 * y * y ) ); // 2nd iteration, this can be removed return y; } To wit, while brilliant, this kind of source requires more enlightenment than I can usually muster upon first read. In summary, here's my white whale: For an adult reader with experience in programming. I wish I could save all the trees killed by every. Single. Game Programming book ever devoting the first two chapters to "Now just what is a variable anyway?" In C or C++, very preferably C++. Languages that are more concise are fantastic for teaching, except for when what you want to learn is how to cope with a verbose language. There is also the benefit of the guardrails that C++ doesn't provide, such as garbage collection. Platform agnostic. I'm sincerely afraid that this book is out there and it's Visual C++/DirectX oriented. I'm a Linux guy, and I'd do what it takes, but I would very much like to be able to use OpenGL. Thanks for everything! Before anyone gets on my case about it, Fast inverse square root was from Quake III Arena, not Doom 3!

  Read the article

• iwlwifi on lenovo z570 disabled by hardware switch

  - by Kevin Gallagher

  It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

  Read the article

• Stale statistics on a newly created temporary table in a stored procedure can lead to poor performance

  - by sqlworkshops

  When you create a temporary table you expect a new table with no past history (statistics based on past existence), this is not true if you have less than 6 updates to the temporary table. This might lead to poor performance of queries which are sensitive to the content of temporary tables.I was optimizing SQL Server Performance at one of my customers who provides search functionality on their website. They use stored procedure with temporary table for the search. The performance of the search depended on who searched what in the past, option (recompile) by itself had no effect. Sometimes a simple search led to timeout because of non-optimal plan usage due to this behavior. This is not a plan caching issue rather temporary table statistics caching issue, which was part of the temporary object caching feature that was introduced in SQL Server 2005 and is also present in SQL Server 2008 and SQL Server 2012. In this customer case we implemented a workaround to avoid this issue (see below for example for workarounds).When temporary tables are cached, the statistics are not newly created rather cached from the past and updated based on automatic update statistics threshold. Caching temporary tables/objects is good for performance, but caching stale statistics from the past is not optimal.We can work around this issue by disabling temporary table caching by explicitly executing a DDL statement on the temporary table. One possibility is to execute an alter table statement, but this can lead to duplicate constraint name error on concurrent stored procedure execution. The other way to work around this is to create an index.I think there might be many customers in such a situation without knowing that stale statistics are being cached along with temporary table leading to poor performance.Ideal solution is to have more aggressive statistics update when the temporary table has less number of rows when temporary table caching is used. I will open a connect item to report this issue.Meanwhile you can mitigate the issue by creating an index on the temporary table. You can monitor active temporary tables using Windows Server Performance Monitor counter: SQL Server: General Statistics->Active Temp Tables. The script to understand the issue and the workaround is listed below:set nocount onset statistics time offset statistics io offdrop table tab7gocreate table tab7 (c1 int primary key clustered, c2 int, c3 char(200))gocreate index test on tab7(c2, c1, c3)gobegin trandeclare @i intset @i = 1while @i <= 50000begininsert into tab7 values (@i, 1, ‘a’)set @i = @i + 1endcommit trangoinsert into tab7 values (50001, 1, ‘a’)gocheckpointgodrop proc test_slowgocreate proc test_slow @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_slow 1godbcc dropcleanbuffersgo–high reads that are not expected for parameter ’2'exec test_slow 2godrop proc test_with_recompilegocreate proc test_with_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_with_recompile 1godbcc dropcleanbuffersgo–high reads that are not expected for parameter ’2'–low reads on 3rd execution as expected for parameter ’2'exec test_with_recompile 2godrop proc test_with_alter_table_recompilegocreate proc test_with_alter_table_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)–to avoid caching of temporary tables one can create a constraint–but this might lead to duplicate constraint name error on concurrent usagealter table #temp1 add constraint test123 unique(c1)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_with_alter_table_recompile 1godbcc dropcleanbuffersgo–low reads as expected for parameter ’2'exec test_with_alter_table_recompile 2godrop proc test_with_index_recompilegocreate proc test_with_index_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)–to avoid caching of temporary tables one can create an indexcreate index test on #temp1(c1)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgoset statistics time onset statistics io ondbcc dropcleanbuffersgo–high reads as expected for parameter ’1'exec test_with_index_recompile 1godbcc dropcleanbuffersgo–low reads as expected for parameter ’2'exec test_with_index_recompile 2go

  Read the article

• How to update off screen bitmap in a surfaceview thread

  - by DKDiveDude

  I have a Surfaceview thread and an off canvas texture bitmap that is being generated (changed), first row (line), every frame and then copied one position (line) down on regular surfaceview bitmap to make a scrolling effect, and I then continue to draw other things on top of that. Well that is what I really want, however I can't get it to work even though I am creating a separate canvas for off screen bitmap. It is just not scrolling at all. I other words I have a memory bitmap, same size as Surfaceview canvas, which I need to scroll (shift) down one line every frame, and then replace top line with new random texture, and then draw that on regular Surfaceview canvas. Here is what I thought would work; My surfaceChanged where I specify bitmap and canvasses and start thread: @Override public void surfaceCreated(SurfaceHolder holder) { intSurfaceWidth = mSurfaceView.getWidth(); intSurfaceHeight = mSurfaceView.getHeight(); memBitmap = Bitmap.createBitmap(intSurfaceWidth, intSurfaceHeight, Bitmap.Config.ARGB_8888); memCanvas = new Canvas(memCanvas); myThread = new MyThread(holder, this); myThread.setRunning(true); blnPause = false; myThread.start(); } My thread, only showing essential middle running part: @Override public void run() { while (running) { c = null; try { // Lock canvas for drawing c = myHolder.lockCanvas(null); synchronized (mSurfaceHolder) { // First draw off screen bitmap to off screen canvas one line down memCanvas.drawBitmap(memBitmap, 0, 1, null); // Create random one line(row) texture bitmap memTexture = Bitmap.createBitmap(imgTexture, 0, rnd.nextInt(intTextureImageHeight), intSurfaceWidth, 1); // Now add this texture bitmap to top of off screen canvas and hopefully bitmap memCanvas.drawBitmap(textureBitmap, intSurfaceWidth, 0, null); // Draw above updated off screen bitmap to regular canvas, at least I thought it would update (save changes) shifting down and add the texture line to off screen bitmap the off screen canvas was pointing to. c.drawBitmap(memBitmap, 0, 0, null); // Other drawing to canvas comes here } finally { // do this in a finally so that if an exception is thrown // during the above, we don't leave the Surface in an // inconsistent state if (c != null) { myHolder.unlockCanvasAndPost(c); } } } } For my game Tunnel Run. Right now I have a working solution where I instead have an array of bitmaps, size of surface height, that I populate with my random texture and then shift down in a loop for each frame. I get 50 frames per second, but I think I can do better by instead scrolling bitmap.

  Read the article

< Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >