Search Results

Search found 22546 results on 902 pages for 'mode management'.

Page 541/902 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

• ESX hosts lose connectivity with iSCSI SAN LUNs

  - by Themist

  I've been experiencing this issue for a couple of months now where my ESX hosts lose connectivity with my iSCSI SAN vmfs volumes. As a results the ESX hosts enter a nonresponsive mode the associated VMs disconnect and the only remedy is to reboot the host. This issue happens randomly . I have escalated this issue with VMWare but I haven't had any solution to the issue yet. I see no errors on my switches and there are no hardware issues as well. My SAN infrastucture is solid and there are 2 paths for every vmfs volume. Did anybody else experienced a similar issue? Themis

  Read the article

• Sound quality in bluetooth headphones doesn't change to high

  - by Sergiy Byelozyorov

  My Bluetooth headset Philips SHB6610 has several profiles. It can work as low-quality headset (HFP) and high-quality headphones (A2DP). I mean sound quality. Typically whenever I start to play the music in my media player it works in high quality, while if I receive a call on Skype it switches to low-quality. Once call is finished it falls back on high quality again. However, from time to time, it happens that I connect headphones to the computer and they just stay in low-quality mode. I don't know how can I change the profile manually, since it was always done automatically so far. The only thing that helps (but not always) is re-pairing of headphones with PC. I am using Windows 7 on Toshiba Satellite Pro P300-1CG laptop, with Belkin Mini Bluetooth Adapter.

  Read the article

• What's the performance on USB docking stations, and can they be used when laptop is closed?

  - by David

  I'm looking into a docking station for a Dell Studio laptop. I don't see the traditional docking stations I'm familiar with - the kind (for a Dell Latitude, for example) where you sit the laptop on top of a long row of pins. Instead, I'm seeing a lot of USB docking stations. When I close my laptop, I want it to go into sleep mode. If I then connect a USB docking station to the laptop while it's closed, will it wake up? What's the performance on USB 2.0 docking stations with a new Dell Studio? Can all of the video and internet traffic really go through a USB 2.0 connection while still providing the best video frame rates and internet speeds? When you undock, I assume you'd have to use the "Safely Remove Hardware" feature in Windows. Will that successfully 'remove' everything attached to the docking station - external drives, thumb drives, etc?

  Read the article

• Problem with IIS 6.0 in WOW WCF 4 (.net 4.0)

  - by Kevin

  We just upgraded to WCF 4 on IIS 6 (running in WoW 32 bit mode), and all of a sudden the services started running into what appears to be concurrency problems. Upon finding out we had a problem, we changed the Behavior Configuration Changes on the WCF server to the follow: <serviceThrottling maxConcurrentCalls="1000" maxConcurrentInstances="1000" maxConcurrentSessions="1000" /> We also changed the number of worker processes from 1 to 5. Doing all of this seemed to have no effect. The service seemed to be running, but throttled by something. Is there anything else that might need to be changed to remove the "artificial" throttling? Were using the default configuration WCF which should be Per-Call (not singleton).

  Read the article

• Cannot change permissions in symlinked dropbox directory in Ubuntu 10.10

  - by Reactor5

  Title pretty much says it all, but here's what I'm doing... ls -l produces this... drwx------ 1 brian brian 4096 2010-12-28 14:19 foldername -rw------- 1 brian brian 0 2010-12-28 15:54 index.html after typing something like chmod o=rx index.html the output of ls -l is the same. This happens whether or not I'm in the original location or the symlink location. However, as a further twist, the output of chmod -v o=rx index.html is the following: mode of `index.html' changed to 0605 (rw----r-x) The location is also being symlinked to by apache. What's going on with my permissions?

  Read the article

• Looking for a USB Thumbdrive / Flash drive encryption solution (not TrueCrypt)

  - by Max888

  I am looking for a USB Thumbdrive / Flash drive encryption solution. I have searched the net but I have never come accross a solution which meets the following: Must handle at least 4GB volume If possible, fully portable (no install required required) Does not require admin rights in order to access/write encrypted files on the flash drive Does not corrupt data should the flash drive is removed from a USB port and the data is in a 'unencrypted' status Data is automatically encrypted if the flash drive is removed from a USB port and the data is in a 'unencrypted' status Portable apps must be able to run from the 'unencrypted' volume (in non-admin mode) PLEASE do not mention TrueCrypt as I am not considering (especially for wish list #3) Many thanks! Update 5th October 2009: Still unresolved.

  Read the article

• Best solution for Multi-WAN failover (inside & out)?

  - by Sean O

  Looking for a way to setup 2 ISPs in failover mode, for both incoming & outgoing traffic, for our small (<100 devices) network. The leading contender for now seems to be the Peplink Balance 310. However, a reseller I spoke with said it's great for 100% outgoing connectivity, but didn't seem to be confident in its abilities to handle incoming traffic. This is important as we host our own web site, Exchange e-mail, and virtual desktops (RDP). Do any Peplink owners use this for failover of incoming traffic? Are there other devices I should be considering? We're currently using a Cisco 1800 series router & ASA 5500 series firewall, with Comcast & T-1 lines (the goal being to replace the T with DSL/FiOS {whenever that becomes availble}). Price range: ~$1000 - $2500 USD. Thanks.

  Read the article

• Anyone have experience with Silicon Mechanics 4-Node Machines?

  - by Matt Simmons

  I'm taking a look at buying some new servers (small infrastructure, 2 racks, etc), and although I like a lot of the features in blades, I'm looking at the price point for Silicon Mechanics' 4-node machines. http://www.siliconmechanics.com/i27091/xeon-2U-4-Node.php It's a bit like a mini-blade enclosure, but has no shared resources, except for the redundant power supplies. A single point of management would be great, but for the low price point here, I'm possibly willing to give that up, if the server quality is adequate. Basically, have you used these machines? Any problems? Anything you like?

  Read the article

• Windows Server 2003 Licensing

  - by Phil

  Hi all, I'm looking to get a Windows Server 2003 box in the middle of my linux network. :( I'm just concerned about CAL licensing for it. No devices will access any network server function of Windows Server 2003. I don't need Windows for DHCP or DNS or file and print sharing. I have linux boxes to do that! xD I just need a box running Windows (of some variety) to host those few apps that have to run on Windows like my AV management console. In short do I need any CALs for my server if its not acting as server itself. I think Windows Server 2003 comes with 5 CALs which can be per user for the admins to use RDP? Thanks, Phil

  Read the article

• Using the Juniper EX3300 Switch as a router?

  - by Richard Whitman

  I have a Juniper EX3300 switch in a data center. And I have connected one of the uplink ports (ge-0/1/0) to my ISP's router. I want to configure it so that all the devices connected to ports in the same VLAN as ge-0/1/0 can access the Internet. I have done some research, and I haven't gotten anywhere really. I have configured the interface as follows: ge-0/1/0 { ether-options { no-auto-negotiation; link-mode full-duplex; speed { 1g; } } unit 0 { family inet { address xx.xx.xx.xx/32; } } } where xx.xx.xx.xx is the "Customer Router Port IP" assigned by my ISP. When I try to commit, I get the following error: Interface ge-0/1/0.0 not enabled for switching Can some one tell me what is the right way to configure it?

  Read the article

• Impersonation on IIS 7.0 passes the machine credentials for Crystal Reports

  - by pknox

  On a 32-bit Windows 2008 server running the Donor2 Application in the Classic .NET Managed Pipeline mode, configured for Windows Integrated Authentication and Impersonation, all of the .NET pages are passing the authenticated user’s credentials [DomainName\UserName]. This is the correct, expected behavior. The Crystal Reports pages, instead of passing the authenticated user’s credentials, are passing the IIS Server’s credentials [DomainName\MachineName$]. One of the very frustrating aspects of this situation is that I have another server which, as far as I can tell, is configured identically. That server, when loading Crystal Reports, is passing the authenticated user’s credentials [DomainName\UserName] as expected. I have obviously missed something, but I have no idea what it could be.

  Read the article

• Virtual PC: Cannot restore machine from hibernate

  - by Paul Lammertsma

  I have two virtual machines set up from Virtual PC on Windows 7 Professional: Windows XP Mode and Xubuntu. Last time I used them (last month or so), I had closed them by hibernating. Evidently, I have meanwhile downloaded a Windows Update affecting VPC and now receive the following error in restoring either of them from hibernation: 'Xubuntu' could not be restored because of either host processor type mismatch or lack of hardware-assisted virtualization support in the system. I've been through the virtual machine's settings, and there's nowhere an option to simply reboot it. (Virtualization is not the problem, as I can create a new virtual machine without any problems.) Any ideas?

  Read the article

• Problem after resizing partition for Fedora under Vmware fusion

  - by user20196

  Hi, I am running FC9 under VMware Fusion 3.0 I wanted to resize my /dev/sda2 partition. In order to do that I did the following: 0. changed the size of the vmware file (under VMware settings). 1. rebooted the host to rescue mode without mounted disks 2. fdisk - removed & added /dev/sda2 - i had bigger /dev/sda2 3. lvm pvresize /dev/sda2 4. lvm pvdisplay - it showed me bigger size on /dev/VolGroup00 for /dev/sda2 5. lvm vgchange -a y - device-mapper: reload ioctl failed: Invalid argument - 2 logical volume(s) in volume group "VolGroup00" now active This is not true because there is no /dev/VolGroup00/LogVol00 My whole "/" disappeared. dmsetup table, shows: VolGroup00-LogVol01: 0 2097152 linear 8:2 38338944 VolGroup00-LogVol00: Can some one help me to solve this? Thank You.

  Read the article

• How to enable CDR on AsteriskNow 1.5

  - by Michal Niklas

  I have upgraded PBX to Asterisk 1.6.2.7 and now CDR files are not created. It looks that such logging is disabled: Connected to Asterisk 1.6.2.7 currently running on pbx2 (pid = 5824) Verbosity is at least 3 pbx2*CLI> cdr show status pbx2*CLI> Call Detail Record (CDR) settings ---------------------------------- Logging: Disabled Mode: Simple Asterisk shows that CDR modules are loaded: pbx2*CLI> module show like cd Module Description Use Count cdr_manager.so Asterisk Manager Interface CDR Backend 0 cdr_csv.so Comma Separated Values CDR Backend 0 app_cdr.so Tell Asterisk to not maintain a CDR for 0 app_forkcdr.so Fork The CDR into 2 separate entities 0 func_cdr.so Call Detail Record (CDR) dialplan functi 0 cdr_custom.so Customizable Comma Separated Values CDR 0 6 modules loaded How to enable creating CDR csv files?

  Read the article

• How to enable "Sleep" for Windows 2012 server

  - by Ramesh

  I recently installed Windows Server 2012. This will serve as the dev-instance for our engineers and will be accessed in multiple time zones. I therefore plan to run this 24x7 but want to conserve energy by going to sleep mode when not in use & enable Wake-On-Magic-Packet. Based on the previous post it appears that there is no option to sleep Win Server 2012 with Hyper-V. Since I don't care much about virtualization now, I uninstalled Hyper-V. In addition to this, I have done the following 1) Ran powercfg -a. Don't find sleep. 2) Added [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hvboot] "Start"=dword:00000003 to try gaining sleep - no luck! 3) Only see Shutdown and Restart in power options. Please help me sleep and save the planet :-) Thanks, Ramesh

  Read the article

• Setup Linksys 3200 remote access

  - by Greg

  I'm trying to setup remote access for my linksys 3200 so that I can configure it through the WAN port. I have turned on remote access, however when I try to connect I get a 404 error. The settings I have are: When I try to access xxx.xxx.xxx.xxx:9999 I just get a 404 error. I have allowed RDP access to a computer behind the router and this works fine on the same IP address. Any idea's on what else I have to do to allow remote management access? UPDATE: I tried changing the port to 80 and it works. Change it back to any other number and it doesn't work. Modem is setup with a DMZ to the router's IP. Why does it only work on port 80? BTW I can't use port 80 because there is a website hosted behind the router.

  Read the article

• How to get HP ASM to work under Xen Hypervisor?

  - by Dennis

  I have a HP DL560, currently running Debian Squeeze as dom0 on Xen Hypervisor, and the fans constantly run at 100%. In the past this wasn't a problem because I could install HP's ASM which includes fan management. However since I have installed a xen enabled kernel, the hp-health driver (the piece of ASM that controls the fans) won't start (at boot or manually). Anyone know of any way to make it work? (Or any other method of controlling the fans safely.) Note that the server has four i386 Xeon CPUs, each with its own fan, plus an extra case fan, and all of the fans can be doubled for redundancy. Also everything works fine under Squeeze without the xen-enabled kernel (can still boot the other one and hp-health loads fine on boot).

  Read the article

• Fixing Windows 7 hibernation

  - by 80skeys

  I've been mucking around with the partitions on my laptop (I'm an experienced Linux/grub guy) and have somehow ended up affecting the ability of Windows 7 to go into hibernate mode. All other functionality seems to be okay. But when I press Hibernate, it behaves as if it starts to (screen goes dark, a little disk activity) but never powers off and if I move the mouse the login screen instantly comes up. I don't know if Window uses a separate partition for hibernation? There is a 200MB partition on the drive - I seem to recall it was related to diagnostics or some other Windows- boot menu stuff. In any case, wondering if there's some commands I can run to restore the ability to hibernate and also which partitions need to be marked "active" and if there's anything I need to do to the MBR of the hard drive or the MBR of the Windows partition? As I said, Windows boots fine as long as it is designated the Active partition. I just need to fix Hibernation.

  Read the article

• How do I change the number of days a copied transaction log is kept in a log shipping configuration?

  - by Decker

  I think this is a pretty simple and perhaps stupid question. I've established log shipping between two SQL Server 2008 servers using the GUI (i.e. the SQL Server Management Studio). It's been running fine -- but now I want to change the number of days the copied files are retained on the secondary server. Is it simply a matter of going back to the GUI and change it there. Is it smart enough just to make that simple change or is the GUI only used to create the initial log shipping configuration?

  Read the article

• how to program a special key on my laptop?

  - by daniel11

  ok so i have a set of touch screen buttons on the top of my laptop's keyboard, (one turns on power save mode, one disables/enables the mouse touch pad, one toggles the wifi adapter, and two turns the volume up/down) however theres another one that opened a file backup utility that came with my laptop. but since i bought my laptop , ive uninstalled that utility, rendering this button useless. So i was wondering if it was possible to reprogram that button to open another file or program on my computer? And if so what are the requirements and how would i go about doing it? Thanks in advance!

  Read the article

• Repeated Reporting Services Login issue when deploying through BIDS to a remote server

  - by Richard Edwards

  We are having a problem deploying a reporting services report to a sql reporting services computer that is configured in SharePoint Integrated mode. I can successfully deploy to the SharePoint document libraries set up for reports and data connections if I do it locally from the box that SharePoint and Reporting Services are deployed on. If I try and do the same thing with the exact same deployment properties from a remote box, I constantly get a Reporting Services Login dialog popping up and no combination of domain\username and password will work. I've even tried the machines local admin account and still nothing. Any ideas where to start looking?

  Read the article

• panic! apache2 cannot start due to unable to read error.log !

  - by vvvvvvv

  apache2 fails to start because it cannot open error.log I've checked the syslog, and found something troubling... Jan 20 02:58:18 unassigned sm-mta[3559]: o0FAD04C017861: to=<[email protected]>, delay=4+22:45:18, xdelay=00:06:18, mailer=esmtp, pri=63390823, relay=asdfa$ Jan 20 03:00:01 unassigned /USR/SBIN/CRON[3939]: (root) CMD (if [ -x /usr/bin/vnstat ] && [ `ls /var/lib/vnstat/ | wc -l` -ge 1 ]; then /usr/bin/vnstat -u; f$ Jan 20 03:00:01 unassigned /USR/SBIN/CRON[3944]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jan 20 03:00:01 unassigned /USR/SBIN/CRON[3949]: (www-data) CMD ([ -x /usr/lib/cgi-bin/awstats.pl -a -f /etc/awstats/awstats.conf -a -r /var/log/apache/acces$ Jan 20 03:02:48 unassigned kernel: [371919.642705] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:02:48 unassigned kernel: [371919.642754] ata3.00: BMDMA stat 0x24 Jan 20 03:02:48 unassigned kernel: [371919.642779] ata3.00: cmd 25/00:08:37:59:e2/00:00:42:00:00/e0 tag 0 dma 4096 in Jan 20 03:02:48 unassigned kernel: [371919.642780] res 51/01:00:37:59:e2/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:02:48 unassigned kernel: [371919.642824] ata3.00: status: { DRDY ERR } Jan 20 03:02:48 unassigned kernel: [371919.657647] ata3.00: configured for UDMA/133 Jan 20 03:02:48 unassigned kernel: [371919.657661] ata3: EH complete Jan 20 03:02:50 unassigned kernel: [371921.857580] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:02:50 unassigned kernel: [371921.857620] ata3.00: BMDMA stat 0x24 Jan 20 03:02:50 unassigned kernel: [371921.857645] ata3.00: cmd 25/00:08:37:59:e2/00:00:42:00:00/e0 tag 0 dma 4096 in Jan 20 03:02:50 unassigned kernel: [371921.857646] res 51/01:00:37:59:e2/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:02:50 unassigned kernel: [371921.857688] ata3.00: status: { DRDY ERR } Jan 20 03:02:50 unassigned kernel: [371921.881468] ata3.00: configured for UDMA/133 Jan 20 03:02:54 unassigned kernel: [371921.881479] ata3: EH complete Jan 20 03:02:54 unassigned kernel: [371924.081382] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:02:54 unassigned kernel: [371924.081417] ata3.00: BMDMA stat 0x24 Jan 20 03:02:54 unassigned kernel: [371924.081443] ata3.00: cmd 25/00:08:37:59:e2/00:00:42:00:00/e0 tag 0 dma 4096 in Jan 20 03:02:54 unassigned kernel: [371924.081444] res 51/01:00:37:59:e2/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:02:54 unassigned kernel: [371924.081487] ata3.00: status: { DRDY ERR } Jan 20 03:02:54 unassigned kernel: [371924.105252] ata3.00: configured for UDMA/133 Jan 20 03:02:54 unassigned kernel: [371924.105261] ata3: EH complete Jan 20 03:02:54 unassigned kernel: [371933.656925] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) Jan 20 03:02:54 unassigned kernel: [371933.656941] sd 2:0:0:0: [sda] Write Protect is off Jan 20 03:02:54 unassigned kernel: [371933.656944] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 20 03:02:54 unassigned kernel: [371933.656956] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 20 03:02:54 unassigned kernel: [371933.656972] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) Jan 20 03:02:54 unassigned kernel: [371933.656979] sd 2:0:0:0: [sda] Write Protect is off Jan 20 03:02:54 unassigned kernel: [371933.656982] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 20 03:02:54 unassigned kernel: [371933.656993] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 20 03:03:34 unassigned kernel: [371966.060069] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371971.776846] ata3.00: BMDMA stat 0x24 Jan 20 03:05:48 unassigned kernel: [371971.776871] ata3.00: cmd 25/00:18:87:10:ee/00:00:42:00:00/e0 tag 0 dma 12288 in Jan 20 03:05:48 unassigned kernel: [371971.776872] res 51/01:00:87:10:ee/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:05:48 unassigned kernel: [371971.776914] ata3.00: status: { DRDY ERR } Jan 20 03:05:48 unassigned kernel: [371971.800668] ata3.00: configured for UDMA/133 Jan 20 03:05:48 unassigned kernel: [371971.800687] ata3: EH complete Jan 20 03:05:48 unassigned kernel: [371974.157850] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371974.157885] ata3.00: BMDMA stat 0x24 Jan 20 03:05:48 unassigned kernel: [371974.157911] ata3.00: cmd 25/00:18:87:10:ee/00:00:42:00:00/e0 tag 0 dma 12288 in Jan 20 03:05:48 unassigned kernel: [371974.157912] res 51/01:00:88:10:ee/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:05:48 unassigned kernel: [371974.157956] ata3.00: status: { DRDY ERR } Jan 20 03:05:48 unassigned kernel: [371974.179773] ata3.00: configured for UDMA/133 Jan 20 03:05:48 unassigned kernel: [371974.179786] ata3: EH complete Jan 20 03:05:48 unassigned kernel: [371976.398570] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371976.398610] ata3.00: BMDMA stat 0x24 Jan 20 03:05:48 unassigned kernel: [371976.398635] ata3.00: cmd 25/00:18:87:10:ee/00:00:42:00:00/e0 tag 0 dma 12288 in Jan 20 03:05:48 unassigned kernel: [371976.398636] res 51/01:00:88:10:ee/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:05:48 unassigned kernel: [371976.398678] ata3.00: status: { DRDY ERR } Jan 20 03:05:48 unassigned kernel: [371976.423477] ata3.00: configured for UDMA/133 Jan 20 03:05:48 unassigned kernel: [371976.423495] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK Jan 20 03:05:48 unassigned kernel: [371976.423498] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] Jan 20 03:05:48 unassigned kernel: [371976.423501] Descriptor sense data with sense descriptors (in hex): Jan 20 03:05:48 unassigned kernel: [371976.423503] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Jan 20 03:05:48 unassigned kernel: [371976.423508] 42 ee 10 88 Jan 20 03:05:48 unassigned kernel: [371976.423510] sd 2:0:0:0: [sda] Add. Sense: Address mark not found for data field Jan 20 03:05:48 unassigned kernel: [371976.423515] end_request: I/O error, dev sda, sector 1122898056 Jan 20 03:05:48 unassigned kernel: [371976.423536] ata3: EH complete Jan 20 03:05:48 unassigned kernel: [371978.630504] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371978.630547] ata3.00: BMDMA stat 0x24

  Read the article

• Linked vSphere servers preventing cloning?

  - by brian

  I've currently got a pair of vSphere5 standard servers (physical, not VAs) managing about a hundred ESX 4.1 and 5 hosts in two different physical and logical datacenters. With our last purchase, we bought another vSphere license for the new vS server. I unmanaged all the ESX servers in one datacenter and added them to new vSphere server. Our previous single-vS-server layout used to be: -vSphere1 --Datacenter1 (where the physical ESX host was located) ---Folder ----ESX server1 --Datacenter2 ---Folder ----ESX server2 Now it looks like -vSphere1 --Datacenter1 ---Folder ----ESX server1 -vSphere2 (new vSphere server) --Datacenter2 ---Folder ----ESX server2 ESX server2 was removed from vSphere1's inventory and added to vSphere2's, so it is now managed by vSphere2. This is nice and all, as no vSphere <-- ESX management traffic leaves the physical datacenter, except for one huge oversight: when I go to clone a VM, the opposite vSphere server (and thus other datacenter) does not show up in the list on the first page of the wizard. Is this a bug, a license limitation, or is it just simply not possible to clone a VM from an ESX box managed by one vS server to another ESX box managed by a /different/ vS server?

  Read the article

• Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

  - by 2020mobile

  Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

  Read the article

• How can I connect JConsole to WebLogic using the WL SSL Listen Port

  - by Mircea Vutcovici

  I would like to be able to use JConsole on remote WebLogic servers via the multiplexer port on SSL. Is it possible this without doing any configuration changes WebLogic? Only by adding some jars (e.g. wljmxclient.jar) or parameters to JConsole. I've tried with variations of the following command without success: $JAVA_HOME/bin/jconsole -J-Djava.class.path=$JAVA_HOME/lib/jconsole.jar:\ $JAVA_HOME/lib/tools.jar:$WL_HOME/server/lib/wljmxclient.jar \ -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote -debug \ service:jmx:rmi:///jndi/iiop://server_name:7441/jmxrmi I think that one of the problem is that the SSL is not enabled in JConsole.

  Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >