Search Results

Search found 18637 results on 746 pages for 'network printers'.

Page 541/746 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

• Can't Start ISC DHCP IPv6 Server

  - by MrDaniel

  Trying to enable the ISC DHCP server for just IPv6 on Ubuntu 12.04 LTS. I have downloaded and installed the DHCP server via the following command: $ sudo apt-get install isc-dhcp-server Then I have followed the instructions in the following resources, Ubuntu Wiki DHCPv6, SixXS - Configuring ISC DHCPv6 Server and Linux IPv6 HOWTO - Configuration of the ISC DHCP server for IPv6 . So from review all those resources it seems like I need to: set a static IPv6 address for the Interface I want to run the DHCPv6 server from that is part of the IPv6 network subnet outside the DHCP range. Edit the /etc/dhcp/dhcpd6.conf file to configure the DHCPv6 range etc. Create the /var/lib/dhcp/dhcpd6.leases Manually start the DHCPv6 server. Setting the Static IP for eth0 $ sudo ifconfig eth0 inet6 add 2001:db8:0:1::128/64 My dhcpd6.conf default-lease-time 600; max-lease-time 7200; log-facility local7; subnet6 2001:db8:0:1::/64 { #Range for clients range6 2001:db8:0:1::129 2001:db8:0:1::254; } Created the dhcpd6.leases file As indicated in the dhcpd.leases man page. $ touch /var/lib/dhcp/dhcpd6.leases #Tried with sudo as well Manually starting the DHCPv6 server. Attempted to start the server using the following command: $ sudo dhcp -6 -f -cf /etc/dhcp/dhcpd6.conf eth0 The problem, the DHCP will not start, with an append error for the dhcpd6.leases file as indicated below when running the manual start command noted above. Can't open /var/lib/dhcp/dhcpd6.leases for append. Any ideas what I might be missing?

  Read the article

• Problems with Maverick upgrade

  - by altenuta

  I upgraded to Maverick 10.10 from Lucid. I have an old Toshiba Satellite with a 1.1 MHz and 256MB RAM. Initially I couldn't get my wireless to work. That solved itself after installing various updates and programs. The problems that remain are: I have to authorize at least 2 times at start-up. This machine is Ubuntu only. No boot load screen. I have a ton of programs and system directories that are in my home folder. Is this normal? It is difficult to wake the computer from sleep. Usually I just shut it down and restart. Tonight I waited and got a message about corrupt memory. The computer takes forever to do just about everything. Slow to start programs or doing things on the web. I am a longtime Mac user (since 1986). I also manage a network of several windoze machines. I am definitely a GUI guy and do very little in the terminal so I really need to know where to begin to get things straightened out. Can I rescue this machine without wiping it and doing a fresh install? This is basically a hobby machine. Aside from all the programs and upgrades I've installed, I have almost no files or documents to worry about saving. Anyone have any ideas about the problems I'm having and the best way to proceed? Thanks, Al

  Read the article

• webm html5 videos lose connection with apache server

  - by Jizbo Jonez

  webm html5 videos that are played through a domain on my server sometimes lose connection. A video that is playing will start to buffer and then stop part of way through with that message "Video playback aborted due to a network error." displayed on the html5 video player. I am delivering the webm videos via a php script on an LAMP server. There doesn't seem to be any errors in the server logs. Is there any php.ini settings or httpd.conf that I need to set? I recently set 'Keep Alive" to "on" in httpd.conf could that be causing this?

  Read the article

• Can Remote Desktop be set up to use IPv6?

  - by Garrett

  I have both a Windows 7 Ultimate and a Windows XP Professional machine set up on my home network. I would like to be able to access them from school. Port forwarding is not currently an option (long story). Is there a way to set it so that I can RDP (yes it has to be RDP not something like TeamViewer or LogMeIn) over IPv6, possibly using Teredo? I have tried but I can't seem to get it working. Also I cannot ping these machines' IPv6 addresses. How can I get this set up?

  Read the article

• Making an advertising server ads from different ad networks

  - by John

  In India there are many ad-networks(other than Adsense) who pay per acquisition or per lead. So Javascript ad code is not required(as fraud clicks don't matter as long as one converts). So an ad network will have many companies and each company will have many banner sizes for ads. Also suddenly any ad may be stopped just because company's target has met. Which is a common nuisance since if we don't remove those url's then that company will get conversions for free. I've a dozen sites and removing the ads are difficult every now and then. Also CPA based ads may not convert at all. That means I'll need to remove non-performing ads regularly. I've gone through: How can I show multiple ad networks on my site? . I've also visited DFP solution but without Adsense they wouldn't let me open account. I want to make an ad server wherein I'll feed new ads (banner image + link for click). I want to maintain categories there like ( shoes, phones, books etc). So if an ad is paused - i'll simply remove/pause the ad there while other ads in the category keep running. Also changing ad code within sites will no more be required. For example - let me have an ad category "clothing" where I can add ads from different companies. So if one of my site requests an ad from there it'll randomly select an ad in this category and return it to site for display. Removing/adding ads within this category will not affect the site requesting those ads. Any idea how to implement it?

  Read the article

• What's the fastest and automatic way to transfer 2GB of data between 2 PCs every night?

  - by phan

  While it's fast (less than 2 minutes) I hate having to copy files from PC #1 onto a USB stick, and then manually popping it in PC #2 to copy the files to PC #2. Dropbox is too slow in uploading and then downloading 2GBs (synching), it could take hours. Copying 2GBs over the network is also slow because we're dealing with 10,000 little files that totals 2GBs, and not just one, giant 2gb file. Not sure why, but dealing with 10,000 little files makes the copy process much longer. Is there any other method that I'm missing? Any ideas? I'm using Win7 on both PCs. Edit: These files change every single night.

  Read the article

• Unable to connect to another computer from the Task Scheduler on Windows 7

  - by Clem

  I am getting the following error when trying to connect to another computer from the Task Scheduler on Windows 7: "The remote computer was not found." The computer that I am trying to connect to is definitely on the network as I can ping it and browse its shared folders in Windows Explorer. Note that I get the same error message when trying to perform the same operation from Performance Monitor. This suggests that I need to something to enable remote connection to the Task Scheduler. I am not very experienced with Windows administration and I am not sure where to look. To give a bit more context, I want to use the Task Scheduler to automatically start Perf Mon on a few machines at my company. I'd like to setup the Task Scheduler remotely. Does anyone know what I need to do?

  Read the article

• CodePlex Daily Summary for Sunday, June 08, 2014

  CodePlex Daily Summary for Sunday, June 08, 2014Popular ReleasesGFramework: GFramework V1.0: GFramework V1.0SFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarAspose for Apache POI: Aspose.Words vs Apache POI WP - v 1.1: Release contain the Code Comparison for Features in Apache POI WP SDK and Aspose.Words What's New ?Following Examples: Working with Headers Working with Footers Access Ranges in Document Delete Ranges in Document Insert Before and After Ranges Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;MyBB: MyBB 1.6.13 Türkçe Kurulum Paketi: MyBB 1.6.13 - Resmi Tam Türkçe UTF-8 Sifir Kurulum Paketi Rar Pass - Sifresi: mybb.com.tr Yayinci site: http://www.mybb.com.tr Orjinal indirme adresi: http://download.mybb.com.tr Destek 1: http://destek.mybb.com.tr/showthread.php?tid=12326 Destek 2: http://tr.mybbdepo.com/mybb-1-6-13-turkce-sifir-kurulum-paketi-konusu.html Dosya: MyBB1613KurulumPaketiTR.rar MD5: d2745b79aa8cc5f8cc09e8a91b50d3cc SHA-1: 6fbb8e611e6d78f8cd3d88d7a773edc67ecc2a3e Ekleyen: XpSerkan MCTR TEAM - Gururla Sunar.SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.PlaySly: GetDirectLink 1.0.1.0: ConfiguraciónNuevo sistema de configuración Nuevo formulario de configuración Añadidas configuraciones visuales Fuente principal, fuente secundaria, fuente menus, fuente botones grandes, fuente botones pequeños Color fondo, color fondo menus, color fondo botones y colores de fuentes Ahora las fuentes soportan estilo (irregular, negrita, tachado y subrayado) Añadidas configuraciones de reproductor Pausar al iniciar para que el vídeo cargue (buffering) Añadidas configuraciones sobre...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...Media Player (Technology Area): Media Player 0.3 (Codname Kalo): Themes are included, along with a picture viewer. This does not require 0.2 to be installed51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...ClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedTEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Pong: Pong_v1.0: Folder Content + the exe file.MudRoom: Parser Test 0.01a: Binary build of proof of concept code that supports a few verbs and can act on a few objects. Shows the basics of compound verb actions, adjective support, and the ignoring of filler words.New Projects2112110162: 2112110162 nguyen do datASP.NET Identity 2.0 AWS DynamoDb: This project provides a high performance cloud solution for ASP.NET Identity 2.0 using AWS DynamoDb replacing the Entity Framework / MSSQL provider.Eye tracking | Accessibility version.: Este projeto tem o objetivo de oferecer de forma barata uma ferramenta para se comunicar com pessoas que só podem mexer os olhos.HCRM: House CRMhuynhtanphat1995: cfzxJJ94_HelloWorld: Hello World Hello World C++ Hello World Ckbvault-mysql: KBVault MySQL is a free knowledge base web application.Khue's project: helloNDataTable: Similar to the DataSet and DataTable Class. using XML to support cross platform data transmission. Suitable for network data transmission. Net Slate: An app that learns users interest and becomes smarter, by providing news according to your interest. NR comes with highly customizable User interface, with dynaPA kece: Edugra is one of android-based applicationPowerCLI Navigator: PowerCLI Navigator is a PowerShell host application meant to improve system administrators' experience with VMware PowerCLI and vSphere management automation.project1: sdczxproject1-kimquyendang: chuoiproject1-vannghia: jghjghjRandom Katas: Random Code Kata implementations in a variety of languages. For personal edification, but if others are interested, have at it.TestWeb: TestWebTimelapse Camera Archive: An ASP.NET web application that organizes, archives, and makes available photos from FTP-capable IP cameras.Ubnt Discovery: This tool allows you to discovery Ubiquiti devices in your network.Website Practice: The aim of this project is to learn team foundation service using codeplex on a website project.Z3_SMC: testzDocumentationHelper: Custom Documentation Helper

  Read the article

• Use router as external high powered Wi-Fi adapter

  - by skywinder

  I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

  Read the article

• How to get my laptop to detect SD cards inserted into its built-in card reader?

  - by Candelight

  My laptop has a built-in SD Card reader but it cannot detect one when inserted. Here is the result when I type lspci from the terminal: 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:09.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

  Read the article

• OpenVSwitch and Virtualbox configuration

  - by Newbie

  I am trying to setup a lab network with OpenVSwitch (Virtual L3 Switch). I want to connect my 3 Virtualbox guest machines (running Debian 6) using OpenVSwitch. But, confused as what should I do first and how should I do this. I mean should I install OpenVSwitch on my VM or on my host machine? If I install on my host machine, then should I make to connect to my VMs. OR If I install OpenVSwitch on one of my VM, then how to connect the rest of the VMs to virtual switch. I know, there is option to connect internal networks in virtualbox, but I a want L3 switch to interconnect my VLANs. Can someone guide me here. Please & Thank you.

  Read the article

• Setting up a Time Capsule with port forwarding

  - by Kaji

  Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

  Read the article

• Setting up a Time Capsule with port forwarding

  - by Kaji

  Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

  Read the article

• Create access point (uap0) on debian 7(arm) - not found?

  - by ethrbunny

  I'm working with a fanless PC that has an ARM chipset, 2 eth plugs and a wifi card (among other things). If I install debian 6 on it all three network interfaces are available at boot time. Today I tried to install debian 7 and had numerous errors indicating that the wireless card isn't supported. uap0: error fetching interface information: Device not found SIOCSIFADDR: No such device uap0: ERROR while getting interface flags: No such device uap0: ERROR while getting interface flags: No such device No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! I've tried comparing the kernel module list to the working system but there are too many other differences to make something obvious enough (to me) stand out. How would I get started debugging this problem?

  Read the article

• hung up troubleshooting packet discards

  - by Chris Satola

  I realize my question is generic, but hopefully someone may have some guidance for me. My network consists of Cisco switches. I am seeing a significant amount (upwards of millions of packets per day) transmit drops between two switches. One being a 3750 and the other a 3560. The peak throughput of this link is only upper 400Mbps, so it shouldn't be a bandwidth issue. At this point, I am sort of clueless where to look or what tools I can use to determine what packets are dropping and why. I can setup a SPAN port on that link and wireshark it, but I don't know if that could tell me anything. Does anyone have any suggestions? Thanks in advance.

  Read the article

• sasl and tls with dns load balancing

  - by achal tomar

  I am using DNS load balancing in my centOs 5 server.The mail sent to the load balancer server are balanced by sending them to 4 more servers who then pass the mails to their destinations in the network.The mails are generated by a Php script which gives all the mail to the load balancer server. Now i want sasl and tls authentication in the load balancer server so that i can prevent the mail server from spammers,Can anyone tell me how to do this. The load balancer pass the mails to other servers based on equal mx record preference,so i want sasl authentication with Dns load balancing.

  Read the article

• Blank screen after GRUB (64 bit) - cannot install Ubuntu

  - by peGGi

  My laptop's specs: Lenovo IdeaPad Z570 Intel Core i5-2410M @ 2.3Ghz 6 Gb RAM DDR3 640 Gb ATAPI Hard-disk Drive @ 5,200 RPM NVIDIA GeForce G520M with Optimus switching technology Broadcom 802.11n Network Adapter REALTEK soundcard Windows 7 Home Premium 64-bit I downloaded Ubuntu Studio 11.04 and burned the iso image onto two different DVDs, using two different programs (one DVD is RW, the other is just R). I verified the hash MD5sum thing. I get as far as GRUB with the 4 options (install, advanced install, disk verification, system rescue) but no matter which one I select, I get a blank screen and nothing happens. The DVD drive spins down after about 30 seconds. Also just before the GRUB screen I get a message saying Error: "Prefix" is not set. I'm not sure if that's relevant. I have tried all the options using both DVDs. Same thing happens. I have changed the graphics setting in BIOS to UMA or Optimus, but still happens either way. I've tried booting with the wireless switch turned off, same thing happens. I downloaded 'vanilla' Ubuntu 64-bit and burned onto a CD, and the same thing happens. I have downloaded Ubuntu 32-bit and I am able to boot from the live CD (interestingly the wireless card won't work, but that's maybe another issue). I have searched extensively through these forums and other sites but I can't see anything that will help me. Is there something I'm missing? I'd really appreciate help on this. The laptop is less than 2 weeks old. I was so looking forward to getting Ubuntu Studio up and running. I've gone about as far as my technical abilities will allow.

  Read the article

• Showing protocol specific mini icons for Jabber/XMPP gateway contacts

  - by aef

  Since a short while I'm using Ubuntu Oneiric Ocelot (11.10) with gnome-shell (Gnome 3) and I'm trying to get accustomed to the default Empathy Instant Messaging client. I'm using a gateway service on the side of my Jabber/XMPP server to communicate with lots of contacts over proprietary networks like ICQ or MSN. So I don't use Empathy's native support for ICQ and MSN, and I don't want to change back to using such a thing for various reasons. One thing that annoys me is that Empathy does not make it clear to me that these contacts are from another instant messaging network. If I enable the View Show Protocols option they are all recognized as Jabber/XMPP contacts. Although I perfectly understand why that happens, I would like to be able to change this behavior to make Empathy mark these contacts correctly. Is there a configuration option or a plugin for this? Or may this feature still be in development and will be available later?

  Read the article

• Risk to native OS from Live CD?

  - by Frost Shadow

  Will booting from a Live CD (I was thinking Anonym OS) have any risk to the native OS? I wanted to try it out on my school´s computer, but I´d rather not have to explain why I accidentally reformatted the HD and deleted everything.. I know once you´ve booted the right way, it shouldn´t leave any trace on the HD, but is it possible I can push some wrong button and end up trying to overwrite the native with the Live OS? Also, since the computer itself is connected to the internet, will the network administrator be able to see that i´ve booted from a Live CD? I´m thinking yes, but just thought I´d check. Thanks for any help!

  Read the article

• Set default owner/user

  - by Daniel Hollands

  I'm a web developer, and so have set-up an old machine in the office as an Ubuntu Server, for the purposes of testing websites. I've set-up LAMP and have created a /var/www folder, from which all my local sites are served. The issue is that of user permissions, i.e. any files that I copy into that folder (from my Windows machine via the network) automatically take on me (daniel) as their owner. The problem is that I want www-data to become the owner. I did some research and saw that it should be possible to use setuid (and setgid) to automatically set www-data as the owner of all files put into /var/www automatically, so far I've not had any luck making it work. Can someone help please? Thank you UPDATE: Would this do what I want it to do? Default file permissions for php user www-data UPDATE 2: I've kinda fixed my issue by changing my samba settings. Using Webmin, I was able to go in and change the default settings (as seen here: http://imageshack.us/photo/my-images/521/captureon.png/)

  Read the article

• IIS cannot access itself

  - by dave

  We are on a corporate network that uses ISA and I am having issues trying to not have requests go through ISA. I have IIS7 on my local Windows 7 machine that has websites and a service layer. The websites access the service layer using a xxxx.servicelayer.local address that is set up in my HOSTS file to point to 127.0.0.1. I have Windows Firewall client which I have disabled. I have tried both adding this address into IE so that it does not go through ISA and also disabled this section altogether. When the website (which is actually IIS making the request to itself) tries to access the service layer I receive an ISA error that proxy authentication has failed. Considering that everything I can see to configure is set to not go through the proxy, ISA, I cannot see how this is actually going through the proxy and giving this error. Is there something within Windows 7 that forces the proxy setting, some sort of caching or similar?

  Read the article

• Setting up SSL with 389 Directory Server for LDAP authentication

  - by GioMac

  I've got 389 Directory Server running on RHEL 5 with groups, users, posix etc. RHEL clients are authenticating users with LDAP - no problems, everything works perfect, but passwords are sent in plaintext and are visible with network sniffer. So, decided to run with SSL: Created CA - got both private and public CA certificates Using CA certs: generated both of private and public certificates and combined (1st file) for 389DS according to 389DS certificate request, imported with CA public cert to 389DS from graphical console (2nd file). Enabled SSL in 389DS On the client, using authconfig-gtk enabled SSL for LDAP, specified only CA public certificate Doesn't work. Howto? What is the best way to integrate safely?

  Read the article

• Help me to set samba and apache on my Ubuntu VM from Vista, starting from ping

  - by avastreg

  Ok the title is not so clear after all, so let's start with the problem description posting some points: i'm on Win Vista i have a Virtual Box Ubuntu 9.04 server (Virtual Machine) installed in windows i'm under Active Directory (maybe helps), with network 192.168.2.x After Ubuntu installation (LAMP), i have: Ubuntu Ip set to 10.0.2.15 (dhcp) Vista pings Ubuntu and Ubuntu pings Vista (only IPs, not names) Can't connect to Apache (default install ubuntu server) at the url h**p://10.0.2.15/ On Ubuntu, testing Apache by doing 'wget http://10.0.2.15/' works Tried to setup samba, writing a share def, but nothing, i can't access from Vista to Ubuntu My scope is: Setting up samba to work on files from windows Reaching apache to test web pages Ok i'm not completely noob (but i'm on the noob way anyway) and i've tried many solutions, so please try to help me; let's look together what went wrong :)

  Read the article

• ZFS: RAIDZ versus stripe with ditto blocks

  - by RandomInsano

  I'm going to build a ZFS file server from FreeBSD. I learned recently that I can't expand a RAIDZ udev once it's part of the pool. That's a problem since I'm a home user and will probably add one disk a year tops. But what if I set copies=3 against my entire pool and just throw individual drives into the pool separated? I've read somewheres that the copies will try and distribute across drives if possible. Is there a guarantee there? I really just want protection from bit rot and drive failure on the cheap. Speed's not an issue since it'll go over a 1Gb network and at MOST stream 720p podcasts. Would my data be guaranteed safe from a single drive failure? Are there things I'm not considering? Any and all input is appreciated.

  Read the article

• I've created a software RAID on SUSE EL 10 and now I need to monitor it.......

  - by Thomas B.

  I have created a Software Raid using the yast2 GUI on SUSE ES 10/11. The raid works great and it's a raid 5. I have 5 Drives they are cheap 2GB Cases that have 2 - 1TB Drives in each case (Serial ATA Drives) and I connect them in via Esata to the motherboard. The problem I have as this is "cheap" storage when of the the 5 drives goes out on the RAID I seem to have no logs of any issues and it get's harder and harder to write to it until it dies. I use SAMBA to mount the 4TB parition to my PC's in my home on a GIG network. My question is this, are there any good (Free) tools in Linux to monitor a raid or the drives on the raid to detect any problems??? I haven't found any yet and was just wondering if some exist.

  Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >