Search Results

Search found 18151 results on 727 pages for 'upside down'.

Page 541/727 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

• Hyper-V snapshots – unable to start VM

  - by ahmedz

  I restarted my Host server after shutting down three guest VMs. After I restarted the machine I tried to start the VMs and got an error stating the the VM failed to start. SERVERNAME failed to start. Attachment 'avhd file path' is read only. Please provide read/write access to the attachment. Error: 'General access denied error' SERVENAME failed to start. (virtual machine ID 17292200-wd22-dd22-d23-dddddd2222) The issue seems to be with the disk space. The VHD file for this VM is 128 GB and there are two AVHD files of 58 and 75 GB. Whereas the total disk space on this drive (E) is 280 GB - the free space is only around 23 GB. I understand that the error is caused by the unavailability of the required disk space. Unfortunately, I cannot increase the disk space on this drive. However I have another drive (D) that has 400 GB of free space. I exported this VM to D drive and then tried to add the copied AVHD files but it gives me a similar error. I am running Windows Server 2008 R2 Datacenter. Any help is appreciated.

  Read the article

• Apache in MAC OS X

  - by Michal K.

  I have problems with apache on MAC OS Lion 10.7.5. I have VirtualHosts: <VirtualHost *:80> ServerName devel.dev DocumentRoot /var/www </VirtualHost> <VirtualHost *:80> ServerName test.dev DocumentRoot /var/www <Directory "/var/www"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have configured httpd.conf to ServerRoot = /usr/htdocs (empty directory). test.dev and devel.dev says always "It works!". Why ? In /var/www I have index.php which contains only one letter "k" (for tests). Edit, more info: I have restart apache milion times. File with VirtualHosts is included. error.log: [Tue Oct 02 20:03:55 2012] [notice] caught SIGTERM, shutting down [Tue Oct 02 20:03:55 2012] [warn] mod_bonjour: Cannot stat template index file '/System/Library/User Template/English.lproj/Sites/index.html'. [Tue Oct 02 20:03:55 2012] [notice] Digest: generating secret for digest authentication ... [Tue Oct 02 20:03:55 2012] [notice] Digest: done [Tue Oct 02 20:03:55 2012] [notice] Apache/2.2.22 (Unix) DAV/2 PHP/5.3.15 with Suhosin-Patch configured -- resuming normal operations When I stop apache, localhost still displays It works!

  Read the article

• Cisco ASA 5505 network route for static IP hosts

  - by TheCapn

  I've configured my internal VLAN using the most basic settings where ports 1-7 are assigned from a pool of addresses in the range 192.168.15.5 - 192.168.15.36. These hosts are given access to the internet and it works great. What I'm trying to set up now is allowing users who are connected to the device and specify their IP (say I connect and request 192.168.15.45) are given internet access and can still work alongside DHCP hosts. Those with a DHCP assigned address are blocked from the internet. Mostly the issue resides in that I am very new to working with the device. I feel that the solution is easy but I'm not looking in the right spots and don't have the correct terminology down to google it. Do I need to define access control lists? Group policies? a new VLAN? The rules that are set up seem to be specific to the entire /24 subnet but when I request a static IP outside of the DHCP range I get blocked from other hosts and the internet.

  Read the article

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• How to fix missing RAID1 drive

  - by Sodved

  I had to do some fiddling about with my cables inside thebox and now I am getting a "Critical Error" about the RAID disks during startup. I have a gigabyte GA-MA770T-UD3 motherboard. Aparently the RAID controller is an AMD SB710 chip. I'm pretty sure I know what happenned. The first time I rebooted I had forgotten the power cable on one of the disks in the RAID1 (mirror) and let it boot up. So I shut down and put the power back in. So now when it boots up I go into the RAID admin interface (between the BIOS screen and the OS loading): it shows the RAID1 as in error the logical device has one disk and says the other is disconnected or missing the other physical disk shows up as a single disk If I boot to the OS (Windows 7 32 bit) the data all seems to be there. If I go into computer management it says my partition is on a disk and working OK. But the other disk is offline because: "The disk is offline because it has a signature collision with another disk that is online" So I am guessing because I STUPIDLY booted up with only one of the disks powered on, the other disk fell out of synch with the mirror and so now cannot rejoin the mirror. How do I fix this? I want to get the RAID1 mirror working again. There does not appear to be any "Repair" option in the basic RAID admin tool which I get into during startup before the OS boots. I have not made any explicit changes to the online one (but I guess the OS has probably written some admin data).

  Read the article

• Mac Outlook showing all links in smart quotes?

  - by user2727128

  I was given the task of fixing my friend's email today and really don't know what the problem is. When an email is sent from his laptop (Mac) from Outlook the email address link in the signature shows exactly like this: [email protected]<mailto:[email protected]>. Additionally the website link displays like this: www.website.com<http://www.website.com>. And lastly, the image comes through as cid:randomstringofnumbers. When I sent him an email and he sent one back it converted my signature to same weird formatting. Plus, even in the header where it shows our emails, they are displaying the same way: [email protected]<mailto:[email protected]>. And the weirdest thing is that this problem seems to be "compounding". So when I scroll down to the last, most recent email in the thread I see this www.website.com<http://www.website.com> next email shows this: www.website.com<http://www.website.com><http://www.website.com> and the next this: www.website.com<http://www.website.com><http://www.website.com><http://www.website.com> This is happening to the emails too, everywhere. I'm thinking this might be something to do with smart quotes and the auto formatting but I'm not sure. Could this be the problem? And if so how do I fix it?

  Read the article

• Why did I loose access to the mailboxes on my old web/mail host after changing to a new one but keeping old MX values

  - by LaserBeak

  So I changed the NS records with registrar to point at the new webhosts DNS servers and edited the SOA record there, deleting the new hosts default MX records and instead putting in the old ones for the old web\mail hosts. The website A record is however pointing at the new webhosts servers and the site comes up fine. But none of this should cause me to loose access to mailboxes on my old hosts mail server right? I log into the control panel on the old host, all the mailboxes are there, all the passwords are fine but I can't log in using either webmail or pop3, says incorrect log-in/password. I even created a new mailbox and password for it respectively, but it would not let me log in. For what its worth I did not change\delete the records for 'A' on the old webhost zone file, since I am not hosting the site with them anymore and NS records are pointing to other hosts DNS servers/zone file so that shouldn't matter right? The old hosts mailserver is also not simply down, I can tell because through the control panel I setup a mail forward for one of the existing inboxes and when sending mail to it, it receives it and forwards it fine. So from this I can deduce that I have correctly inputted the old hosts MX records into the zone file hosted on the new hosts DNS and the mail is being sent to the old hosts mail server(s) and is successfully forwarded by it. But why can't I log into those account/inboxes anymore ?

  Read the article

• Apache not routing to tomcat on correct Virtual host

  - by ttheobald

  We are looking at moving from Websphere to Tomcat. I'm trying to send traffic to tomcat from apache web server based on the virtual host directives in apache web server. After some playing around I have it sort of working, but I'm noticing that if I have a JKMount directive in the first VirtualHost in apache, all virtualHosts will send to the application server. If I have the JKMount in Virtual hosts further down in the configs, then only that VirtualHost works with the request. For Example, with the configs below here are my symptoms mysite.com/Webapp1/ -- I resolve to the proper application mysite2.com/Webapp1/ -- I resolve to the proper application (bad!) mysite.com/MonitorApp/ -- I resolve to the proper application mysite2.com/MonitorApp/ -- I resolve to the proper application (bad!) mysite.com/Webapp2/ -- I DO NOT get to the app (good) mysite2.com/Webapp2/ -- I resolve to the proper application Here's what my web server virtualhosts look like. <VirtualHost 255.255.255.1:80> ServerName mysite.com ServerAlias aliasmysite.ca ##all our rewrite rules JkMount /Webapp1/* LoadBalanceWorker JKmount /MonitorApp/* LoadBalanceWorker </VirtualHost> <VirtualHost 255.255.255.2:80> ServerName mysite2.com ServerAlias aliasmysite2.ca ##all our rewrite rules JkMount /Webapp2/* LoadBalanceWorker </VirtualHost> we are running apache webserver 2.2.10 and tomcat 7.0.29 on Solaris10 I've posted an image of our architecture here. http://imgur.com/IFaA6Rh I HAVE not defined VirtualHosts on Tomcat. Based on what I've read, my understanding is that it's only needed if I'm accessing Tomcat directly. Any assistance is appreciated. Edit Here's my worker.properties. worker.list= LoadBalanceWorker,App1,App2 worker.intApp1.port=8009 worker.intApp1.host=10.15.8.8 worker.intApp1.type=ajp13 worker.intApp1.lbfactor=1 worker.intApp1.socket_timeout=30 worker.intApp1.socket_connect_timeout=5000 worker.intApp1.fail_on_status=302,500,503 worker.intApp1.recover_time=30 worker.intApp2.port=8009 worker.intApp2.host=10.15.8.9 worker.intApp2.type=ajp13 worker.intApp2.lbfactor=1 worker.intApp2.socket_timeout=30 worker.intApp2.socket_connect_timeout=5000 worker.intApp2.fail_on_status=302,500,503 worker.intApp2.recover_time=30 worker.LoadBalanceWorker.type=lb worker.LoadBalanceWorker.balanced_workers=intApp1,intApp2 worker.LoadBalanceWorker.sticky_session=1

  Read the article

• UEFI boot options gone

  - by user1797930

  I ran into some issues booting Windows after trying to make a complete backup of the disc. After searching for information about some of the error codes, I found advise to change some BIOS settings, but instead I thought I would just "restore defaults" to make sure all settings were set as originally intended. After doing so, all UEFI boot options except for "Windows Boot Manager" are gone. That means, including the CD/DVD drive, so I cannot even boot from a recovery DVD anymore - and as explained, Windows is not able to boot either. Do you have any advice? When I added a secondary drive originally, it was automatically added to the boot options menu. Even when removing and re-adding the drive physically, the option does not appear again. I have tried unplugging power, and hold down start button for 10 seconds, and boot afterwards - no change. It's a laptop so removing CMOS battery is not an option. I have read information that it is an issue with data removed from NVRAM, but I am unable to find a way to recover it. "Add new boot options" requires a path - but the CD/DVD was originally available without any CD's in the drive - so there is no path available to add the drive. I did try to open EFI shell, but it seems not to be embedded in the UEFI/BIOS. It just says "not found". I'm really lost here - any advice is appreciated.

  Read the article

• Directory service unavailiable, new hardware same settings

  - by Alex

  I'm working on a project with 2 sites connected by a VPN. Site 1 has the main server and there is a secondary server at site 2 which I am trying to replace. The current setup works perfectly however I can't for the life of me get the replacement server at site 2 up and running. I'm trying to replace like for like just upgraded hardware. I have installed the OS (all Server 2003 Standard SP2) and used exactly the same settings as the old server. I have setup Active Directory, DNS Server, DHCP Server and WINS Server configured. I have used all the same settings as the old server (except IP address and name). I can access the active directory but I can't do anything; add, edit, delete all returns "the directory service is unavaliable". No-one can login on any of the computers on site 2 and the internet is down. Plugging the old server back in and connecting it to the network rectifies the issue (so both new and old are connected at site 2), everyone can login and the internet is back (curious since the modem connects direct to the switch, and even with the new server online I can connect to the router via IP but not the net). I really don't have much experience but I've been roped into doing this because my company is too cheap to hire a real network admin. Any suggestions of where I can start to troubleshoot this, its driving me crazy and I only have a day before all the users are back on site.

  Read the article

• I have to manually change the DNS suffix order every time I connect to VPN. Can I change this permanently or fix the problem somehow?

  - by CarlB

  Sorry in advance but I'm a programmer, not a network engineer, so I'm a noob at this stuff. Anyway, when I am not connected to VPN from my work PC at home, I have the following DNS suffixes listed (real domain names substituted): enterprise.org network.org company.com us.enterprise.org After connecting to VPN, one more DNS suffix is added to the very top of the list: problem-domain.com At this point, most network functions that I can normally perform when actually connected to the LAN in the office are unusable. I get error messages about the network paths not being found and what-not. Anyway, I played around with the suffixes and realized that if I just moved problem-domain.com down one spot to the second in the list, all the problems went away. Unfortunately, it returns to the top spot every time I reconnect, and I tend to get disconnected frequently. Is there something else I can do about this or should I just contact the IT department? I've had this problem before and they weren't able to resolve it but I suppose it would be worth trying again if I could get a different person on the job. What I don't understand is that I thought it didn't matter what order the suffixes were in? Isn't Windows supposed to go through each suffix until it finds a match (or has gone through all the suffixes)? Why is it quitting after the first one? Thanks in advance.

  Read the article

• Potential impact of large broadcast domains

  - by john

  I recently switched jobs. By the time I left my last job our network was three years old and had been planned very well (in my opinion). Our address range was split down into a bunch of VLANs with the largest subnet a /22 range. It was textbook. The company I now work for has built up their network over about 20 years. It's quite large, reaches multiple sites, and has an eclectic mix of devices. This organisation only uses VLANs for very specific things. I only know of one usage of VLANs so far and that is the SAN which also crosses a site boundary. I'm not a network engineer, I'm a support technician. But occasionally I have to do some network traces for debugging problems and I'm astounded by the quantity of broadcast traffic I see. The largest network is a straight Class B network, so it uses a /16 mask. Of course if that were filled with devices the network would likely grind to a halt. I think there are probably 2000+ physical and virtual devices currently using that subnet, but it (mostly) seems to work. This practise seems to go against everything I've been taught. My question is: In your opinion and  From my perspective - What measurement of which metric would tell me that there is too much broadcast traffic bouncing about the network? And what are the tell-tale signs that you are perhaps treading on thin ice? The way I see it, there are more and more devices being added and that can only mean more broadcast traffic, so there must be a threshold. Would things just get slower and slower, or would the effects be more subtle than that?

  Read the article

• Hard Drive problem: is it the SATA controller or the HDD itself?

  - by Drooling_Sheep

  I have a Samsung 1.5TB hard drive hooked up to an ECS H55H-I mini-ITX motherboard. I have XBMC 10 (modified Ubuntu 10.04) installed for use as an HTPC. The hard drive encounters occasional errors during normal use which cause it to be remounted read-only. I have updated the BIOS on the motherboard, changed the SATA cable and moved it to different ports on the motherboard, installed and re-installed the OS (including different versions of XBMC and generic ubuntu), all to no avail. I recently ran tests both with badblocks -sv and smartctl -t long. Both reported no errors. This makes me think the motherboard or SATA controller is probably the issue. Does anyone know of any further tests I can do to help narrow this down? The processor is a Core i3. I forget the model number but it's one of the 32nm ones with on-package graphics. There's no discrete video card or optical drive. The power supply is a 150W Rosewill (pretty sure) that came with the case.

  Read the article

• Conditional formatting Excel 2007/2010: Highlight the first cell in the row that contains duplicate values?

  - by Nancy Prades

  I have a table with hundreds of columns and rows of data; each row and column have a header. For instance, column headers are ITEM, FILE1, FILE2, FILE3, etc. and row headers are AA, BB, CC, DD, and so on. Under conditional formatting, I used "Highlight Cells Rules" "Equal to", in order to highlight cells that have values equal to the value in another cell. In this case, my formula rule is: Rule: Cell Value = $A$1 Applies to: =$B$3:$G$8 When I input "X" into cell A1, Excel will highlight all of the cells that have a value equal to "X", in this case, the following cells are highlighted: B3, C5, G6, and E8. Here's my problem. The data that I am working with contains more than 100 columns and rows. I want to identify all of the ITEMS (AA, BB, CC, etc.) that contain the duplicate file "X". In order to do this I have to scroll right to left, and up and down. Here's my question. Is there a way to use conditional formatting to add an additional rule? I want to keep the current rule, but I also want the row header to be highlighted if any of the cells in that row contain a value equal to "x". In this case, I want AA, CC, DD, and FF to also be highlighted. Is this possible? I've spent days trying to figure this out - and no luck. Any help would be appreciated! :) Nancy A B C D E F G 1 X 2 ITEM FILE1 FILE2 FILE3 FILE4 FILE5 FILE 6 3 AA x t y u d w 4 BB r y a b k d 5 CC y x f u i g 6 DD t v b d f x 7 EE e w y s l n 8 FF w u n x e m

  Read the article

• How many guesses per second are possible against an encrypted disk? [closed]

  - by HappyDeveloper

  I understand that guesses per second depends on the hardware and the encryption algorithm, so I don't expect an absolute number as answer. For example, with an average machine you can make a lot (thousands?) of guesses per second for a hash created with a single md5 round, because md5 is fast, making brute force and dictionary attacks a real danger for most passwords. But if instead you use bcrypt with enough rounds, you can slow the attack down to 1 guess per second, for example. 1) So how does disk encryption usually work? This is how I imagine it, tell me if it is close to reality: When I enter the passphrase, it is hashed with a slow algorithm to generate a key (always the same?). Because this is slow, brute force is not a good approach to break it. Then, with the generated key, the disk is unencrypted on the fly very fast, so there is not a significant performance lose. 2) How can I test this with my own machine? I want to calculate the guesses per second my machine can make. 3) How many guesses per second are possible against an encrypted disk with the fastest PC ever so far?

  Read the article

• Network outage caused by SMC8013WG Cable Modem/Router ?

  - by mkocubinski

  At work, we have a basic Class C Network. The gateway/router is a SMC8013WG (stock comcast commercial cable modem), and simple unmanaged switch (HP Pro Curve 1400 24G). The SMC8013WG is our default gateway as well as DHCP server. Periodically, I'd say almost every other day.. the entire network will just stop responding. I won't be able to ping/see the gateway, any computers on our local network, or anything on the internet. The only way to fix this is to unplug the Comcast cable modem, wait, and plug back in. This unfailingly fixes the problem. But this doesn't make much sense to me.. shouldn't the network still be fine locally, since everything is plugged into the switch anyway? Why would resetting the router fix this? Can anyone suggest anything to check to in order to narrow this problem down? Just to be clear.. here is the basic topology: { Internet } -- (12.345.67.89) Comcast Cable Modem (192.168.1.1) -- Switch -- 192.168.1.2-254 P.S. Our IT guy is in about 3 hours a day every other week or so, so.. we're kind of on our own most of the time.

  Read the article

• vi and emacs: comparison? (not flamebait!)

  - by jared

  So, I've been enjoying learning and using vi for the last couple of years. The beauty of vi, for me, is that its UI is a language of movement and action with a very uniform, simple grammar, and which is terse enough that the requisite memorization pays ample dividends in how much more I enjoy working with text (by avoiding boring repetition and eliminating micro-hassles, like that half-second annoying wait while you scroll down the screen). (Note--I don't claim to have expert knowledge of vi, but I get around decently well: comfortable with limited '@' macros and regexp search-and-replace within files; frequently use multiple buffers, tabs, and windows; get around pretty well in the file browser; understand the grammar of actions + movement + subject (as described so aptly in this beautiful SO answer); and had some pretty sweet debugger and ctags integration going with PHP.) I wonder if some emacs folks could take a swing at explaining what emacs does brilliantly, or sum its strengths up in a phrase or two. Spare me the talk about productivity; I'm more interested in conceptual clarity. Lisp-centric answers are okay; I'm learning Scheme on the weekends, and would pick up emacs for that alone (have been using Racket).

  Read the article

• What can cause the system to freeze in a way where even the reset button takes a long time to react?

  - by ThiefMaster

  What can be the reason for system freezes that are so "hard" that even the hardware reset button takes about 3 seconds until it actually resets the system (and then it actually powers down and up again instead of doing a "clean" hard reset like when pressing it during a normally running system). Since it initially happened mainly while playing videos from YouTube I suspected the graphics card - however, I replaced it recently and it did not change it. It still happens from time to time (and sometimes more often, like a few times times in the last few hours). The system is running Windows 7 - but I don't think this matters since I don't think any software, not even the OS, can actually affect the reset button's behaviour. The PC is not overheated and the freezes happen randomly. There is also no malware on the system. The CPU is an Intel Core i7-920 on a Gigabyte EX58-UD5 mainboard. What could be the cause for this problem? Faulty RAM? I did not run a full memtest86 check yet, but I wonder if there is a more likely issue than faulty RAM - checking 12G of ram does take some time after all! There are no entries in the event log - but that's what I expected since the system freezes so hard that I doubt it has time to write anything to any log.

  Read the article

• vim: mapping <control-j> key

  - by bhh1988

  When I'm in insert mode, I sometimes want to be able to move around without using the arrow keys, and without having to go back into normal mode. So in my vimrc I've set up key bindings to do this: imap <C-l> <right> imap <C-h> <left> imap <C-k> <up> imap <C-j> <down> But for some odd reason the only one that doesn't work is the last one, . Doing this in insert mode just gives no response. I'm wondering why this might be, and I just don't know where to even begin looking for the problem. It doesn't appear to be mapped to anything since nothing happens when I do it, whether I'm in the terminal or in gvim. Any pointers would be great! Thanks!

  Read the article

• Linux can dual display but windows can't?

  - by Mr_CryptoPrime

  I have two monitors, one that is hdmi-to-dvi and the other vga-to-dvi. I have an AMD HD Radeon 6900 series graphics card installed. I got Ubuntu to display dual monitors, but then I restarted for an update and then Ubuntu wouldn't even boot in recovery mode, it just kept cycling forever...displaying something about "timeout: killing [filepath] [hexadecimal]. So I tried booting into windows (7-professional) and it crashed and displayed this after rebooting: IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT-IN-NONPAGED-AREA. I went into Bios and reverted to the system defaults and ran system restore and it booted ok, but the dvi-to-dvi monitor would not display. I made sure my drivers were updated and catalyst was updated. Also through research discovered only one is for vga and the other is digital only, so I put the vga-to-dvi in the vga slot and so on. Neither windows or catalyst will detect the dvi-to-dvi montior. Any suggestions? Thanks. EDIT: Found out that booting into Ubuntu with only one monitor (using either monitor with either cable) worked perfectly fine. I could then add another monitor and it displays ok. However, it will, out of the blue, suddenly distort the display. At first I thought the computer crashed, but it is something with the video output from the GPU to the monitor because I pushed the power button and it would refresh every 5secs or so and I could see the "Ubuntu will power down in X seconds", even though it was horribly distorted. Any ideas what's causing this?

  Read the article

• How to push changes from Test server to Live server?

  - by anonymous

  As a beginner, I finally noticed the issue with making changes to the live server I've been working on, now that I have a couple users on it, since I bring it down so often. I created an EC2 image of my live server and set up a separate instance on EC2, so now I have 2 EC2 instances, Stage and Production. I set up GitHub and push changes to stage and test my code there, and when it's all done and working, I push it to the production branch, and everything is good. And there is a slight issue here since I name my files config_stage.js and config_production.js and set up .gitignore on each server, and in my code, I would have it read the ENV flags and set up the appropriate configs, is this the correct approach? And my main question is: how do you keep track of non-code changes to the server? For example, I installed HAProxy, Stunnel, Redis, MongoDB and several other things onto the Stage server for testing and now that it's all working and good, how do I deploy them to production? Right now, I'm just keeping track of everything I installed and copying configuration files over, which is very tedious and I'm afraid I may have missed a step somewhere. Is there a better way to port these changes over from my test server to my live server?

  Read the article

• With Ubuntu 12.04 unlike 11.04 Wine installed application start menu links are missing

  - by Ron Whites

  With Ubuntu 12.04 and wine 1.4 unlike ubuntu 11.04 with wine 1.2.2 installed application start menu links are missing. For instance with Ubuntu 11.04 including Wine I can install one of our Windows applications and then can go to Applications Wine Programs Semantic Designs TestCoverage Documentation to bring up the documentation for how to run our tool. Unfortunately with Ubuntu 12.04 the Applications menu is gone and going to Dash I do see "Recent Apps and more apps" but my installed Wine application and related documentation link is shown present, even though the wine uninstaller shows in present. I found this online suggestion and tried using the gnome "main menu"... Windows key to launch the Dash. Enter "Main Menu" in the search field and open the old Edit Main Menu app. Select the Category (aka Unity Dash Filter) you want the item in. Name the Dash/Launcher Item Add the Command to launch said app With "mainmenu" then get down to the TestCoverage Documentation and I could see a command link in properties of .. env WINEPREFIX="/home/sdtest/.wine" wine C:\windows\command\start.exe /Unix /home/sdtest/.wine/dosdevices/c:/users/sdtest/Start\ Menu/Programs/Semantic\ Designs/Test\ Coverage/Java\ 1.7\ Documentation.lnk BUT I could not execute this link to view the installed documentation. So I copied the link properties into a file, set it as executable, and ran it as a bash script and the documentation came up! So why can't I use this link under main menu?

  Read the article

• Connection reset to some websites

  - by user143271

  I'm using a 2wire 3600HGV modem/router. Starting around this afternoon, any time I try to access anything from i.imgur.com I get The connection to i.imgur.com was interrupted in chrome, and the actual error is Error 101 (net::ERR_CONNECTION_RESET). It's network wide (tested multiple browsers on multiple computers and phones). I can access imgur.com just fine, but nothing from its content server i.imgur.com. If I disable wifi on my phone and use its 4G connection, I can access it just fine, so obviously imgur isn't down. I haven't changed any configuration on the router, and I have tried changing DNS servers (I tried google and OpenDNS). It also seems that imgur is not the only site; howtogeek and a couple of others seem to have the same problem. It looks like they are all edgecast cdn content servers, but not all edgecast cdn servers fail. Tumblr, for instance, works just fine. Does anyone have any idea what would be causing this? EDIT: Related to the edgecast remark, it would appear that this is a specific edgecast server: gs1.wpc.edgecastcdn.net. Tumbler's content is on gs1.wac.edgecastcdn.net, so it might be on a different server. Edit #2: These sites all respond to ping just fine as well.

  Read the article

• Mysql InnoDB and quickly applying large updates

  - by Tim

  Basically my problem is that I have a large table of about 17,000,000 products that I need to apply a bunch of updates to really quickly. The table has 30 columns with the id set as int(10) AUTO_INCREMENT. I have another table which all of the updates for this table are stored in, these updates have to be pre-calculated as they take a couple of days to calculate. This table is in the format of [ product_id int(10), update_value int(10) ]. The strategy I'm taking to issue these 17 million updates quickly is to load all of these updates into memory in a ruby script and group them in a hash of arrays so that each update_value is a key and each array is a list of sorted product_id's. { 150: => [1,2,3,4,5,6], 160: => [7,8,9,10] } Updates are then issued in the format of UPDATE product SET update_value = 150 WHERE product_id IN (1,2,3,4,5,6); UPDATE product SET update_value = 160 WHERE product_id IN (7,8,9,10); I'm pretty sure I'm doing this correctly in the sense that issuing the updates on sorted batches of product_id's should be the optimal way to do it with mysql / innodb. I'm hitting a weird issue though where when I was testing with updating ~13 million records, this only took around 45 minutes. Now I'm testing with more data, ~17 million records and the updates are taking closer to 120 minutes. I would have expected some sort of speed decrease here but not to the degree that I'm seeing. Any advice on how I can speed this up or what could be slowing me down with this larger record set? As far as server specs go they're pretty good, heaps of memory / cpu, the whole DB should fit into memory with plenty of room to grow.

  Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >