Search Results

Search found 34060 results on 1363 pages for 'webpage access'.

Page 541/1363 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

• Filtered Router Interface

  - by jviotti

  I'm having some problems with a Scientific-Atlanta DPR2320R2. In specific with the WIFI. A few months ago I changed its password and username and now I can't remember. So I tried cracking it with Hydra but it drove things worse. Content of webadmin was rendered partial, and threw lot of errors. I then reseted the router. I found myself abled to browse the web with ethernet-connected pc. Wifi is configured by registering the device's MAC Address, and indeed the router has been reseted and register MAC address were lost. No device could connect to wifi. In fact, the device does not even recognize the network. I tried the pointing to 192.168.0.1 to restablish the MAC's. But I couldn't connect to the router access point. Tried listing up hosts: $ nmap -sP 192.168.0.0/24 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:18 ART Host 192.168.0.1 is up (0.0018s latency). Host 192.168.0.11 is up (0.00025s latency). Nmap done: 256 IP addresses (2 hosts up) scanned in 59.62 seconds Then checked 192.168.0.1 was really up by sending pings. It responded to all my pings. I quick-scanned the access point: $ nmap 192.168.0.1 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:08 ART Interesting ports on 192.168.0.1: Not shown: 999 closed ports PORT STATE SERVICE 80/tcp filtered http Nmap done: 1 IP address (1 host up) scanned in 6.73 seconds Look the state of the port 80: FILTERED. I'm pretty confused now. Any suggestion would be appreciated. Thanks in advance.

  Read the article

• Apache 2 proxy for Tomcat 7

  - by hsnm

  Following the how-to, I wanted to make a proxy for traffic to the address /app to be processed by Tomcat 7. I added this to my httpd.conf: LoadModule proxy_module {path-to-modules}/mod_proxy.so LoadModule deflate_module modules/mod_deflate.so ProxyPass /app http://localhost:8081 ProxyPassReverse /app http://localhost:8081 I also have this on my server.xml: <Connector port="8081" enableLookups="false" acceptCount="100" connectionTimeout="20000" proxyName="localhost" proxyPort="80"/> And I have the folder /var/lib/tomcat7/webapps/app with my application files. I restarted both Tomcat 7 and Apache 2 after doing the configurations above. Problem: When navigating to my webpage.com/app, I get the error 500. I consulted apache logs, it says: [warn] proxy: No protocol handler was valid for the URL /app. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. Update: This is running in ubuntu. I resolved this by adding LoadModule proxy_http_module modules/mod_proxy_http.so to my httpd.conf. Now I have another question: How can I make this proxy to work on SSL through port 443?

  Read the article

• running automated fsck on remote server

  - by GriffinHeart

  I had another question about df, and now i came to conclusion i need to run fsck my partition, i've been reading about it and would like some advice, if possible. The situation is like this, no physical access to the server and i want to run fsck. from what i read i just need to touch /forcefsck and when i reboot it will run fsck. My question is, at its basis, with what arguments will the fsck run? Will it need user input to correct errors, etc? and after running will it save a log of what happened? if this was how it ran it would be perfect, anyway of enforcing that on reboot? fsck -v -p /machine/disk/p1 2>&1 > fscklog.txt Also here they describe this: it's also a good idea on debian and debian-derivatives like ubuntu to edit /etc/default/rcS on remote servers and set "FSCKFIX=yes" that adds "-y" to the boot time fsck, so it doesn't risk the remote server being stuck waiting for someone to login at the console and run fsck. But on Centos that doesn't seem to exist I only have ssh access at the moment so that is why i'm being so picky with it. here's some info about disks and mounted volumes on the server: http://pastebin.centos.org/33314 Thanks.

  Read the article

• What keeps you from changing your public IP address and wreak havok?

  - by Whitemage

  An interesting question was asked to me and I did not know what to answer.. So I'll ask here. Let's say I subscribed to an ISP and I'm using cable internet access. ISP gives me a public IP address of 60.61.62.63. What keeps me from changing this IP address to, let's say, 60.61.62.75 and mess with another consumer's internet access? For the sake of this argument, let's say that this other IP address is also owned by the same ISP. Also, let's assume that it's possible for me to go into the cable modem settings and manually change the IP address. Under a business contract where you are allocated static addresses, you are also assigned a default gaetway, a network address and a broadcast address. So that's 3 addresses the ISP "loses" to you. That seems very wastefull for dynamically assigned IP addresses where the majority of customers are.. Could they simply be using static arps? ACLs? Other simple mechanisms? Anyone who worked at an ISP would be willing to explain this a bit?

  Read the article

• How do I set up DNS with nic.io to point to an AWS EC2 server?

  - by Chad Johnson

  I purchased a domain one week ago via nic.io. I have elected to provide my own DNS [because they provided no other option]. I'm trying to point my .io domain at my EC2 server instance. I've allocated an elastic IP and associated it with the instance. I can SSH into the instance and access point 80 via the IP address just fine. The IP is 54.235.201.241. nic.io support said the following: "You have selected to provide your own DNS and therefore if there is an issue with the set-up of the name servers you will need to contact your DNS provider." So, I created a Hosted Zone via Route 53 in AWS. This created NS and SOA records. I then set the Primary and Secondary servers at nic.io's domain admin page to the SOA record domains. Additionally, I set the optional servers to the NS domains. I did this two days ago, and I can't access the server via the domain. I ran a DNS check here...still not sure what I need to do: http://mydnscheck.com/?domain=chadjohnson.io&ns1=&ns2=&ns3=&ns4=&ns5=&ns6=. I have no idea what I'm supposed to do. Does anyone have any ideas?

  Read the article

• nginx rewrite or internal redirection cycle

  - by gyre

  Im banging my head against a table trying to figure out what is causing redirection cycle in my nginx configuration when trying to access URL which does not exist Configuration goes as follows: server { listen 127.0.0.1:8080; server_name .somedomain.com; root /var/www/somedomain.com; access_log /var/log/nginx/somedomain.com-access.nginx.log; error_log /var/log/nginx/somedomain.com-error.nginx.log debug; location ~* \.php.$ { # Proxy all requests with an URI ending with .php* # (includes PHP, PHP3, PHP4, PHP5...) include /etc/nginx/fastcgi.conf; } # all other files location / { root /var/www/somedomain.com; try_files $uri $uri/ ; } error_page 404 /errors/404.html; location /errors/ { alias /var/www/errors/; } #this loads custom logging configuration which disables favicon error logging include /etc/nginx/drop.conf; } this domain is a simple STATIC HTML site just for some testing purposes. I'd expect that the error_page directive would kick in in response to PHP-FPM not being able to find given files as I have fastcgi_intercept_errors on; in http block and nave error_page set up, but I'm guessing the request fails even before that somewhere on internal redirects. Any help would be much appreciated.

  Read the article

• Mysql can not resolve hostnames when checking privileges

  - by Fabio

  I'm going crazy to solve this. I have a mysql installation (on machine db.example.org) which doesn't resolve a given hostname. I gave privileges using hostnames i.e. GRANT USAGE ON *.* TO 'user'@'host1.example.org' IDENTIFIED BY PASSWORD 'secret' GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, INDEX ON `my_database`.* TO 'user'@'host1.example.org' However when I try to connect using mysql -u user -p -h db.example.org I obtain ERROR 1045 (28000): Access denied for user 'user'@'192.168.11.244' (using password: YES) I already checked for correct name resolution in the dns system: $ dig -x 192.168.11.244 ;; ANSWER SECTION: 244.11.168.192.in-addr.arpa. 68900 IN PTR host1.example.org. I've also checked for skip-name-resolve option in mysql variables in fact if I can access from another machine on the same subnet using hostname privileges. The only difference is that host1.example.org and db.example.org point the same ip on the same machine i.e. both db.example.org and host1.example.org have ip 192.168.11.244. In this way all the applications using that database can use the name db.example.org and we can move the data on other hosts (if needed) just by changing the dns record, leaving the application code unchanged. What should I do to solve this or at least to understand what's happening?

  Read the article

• How to create custom content for nginx error 502 page, keep origin url on browser

  - by user123862

  i'm trying to get custom language and message for nginx error page but keep url on browser.. not success for eg: i go to url : xaluan.com/aaa/bbb.html on the time server down.. nginx will show error 502. with the same url but custom message as my language. test 1. I created a custom page at /usr/local/nginx/html/205.html as following config but it show on web site when error is default nginx error at domain.com/50.html ( the content of webpage not same as i created) error_page 502 /502.html; location = /502.html { root /usr/local/nginx/html; } test 2. Then i create same page at my www domain folder /home/xaluano/public_html/502.html but this keep redirect me to root domain.com/502.html the content now same as i created. but.. the url still not as i need error_page 502 /502.html; location = /502.html { root /home/xaluano/public_html; internal; } EDIT UPDATE for more detail 10/06/2012 please download my nginx config http://pastebin.com/7iLD6WQq and vhost config following: http://pastebin.com/ZZ91KiY6 == the case test.. if apache httpd service stop: #service httpd stop then open browser go to: xaluan.com/modules.php?name=News&file=article&sid=123456 I will see the 502 error with the same url on browser address == Custome error page I need the config which help when apache fail .. will show the custom message tell user wail for 1 minute for service back then refress current page with same url ( refresh I can do easy by javascript ), Nginx dosent change url so java-script can work out. any help will be great.. thank in advance

  Read the article

• What could cause a huge packet loss in Ubuntu 9.10, for both wired and wireless?

  - by xzenox

  I was previously using 9.04 fine (and in fact, I am posting this from my old 9.04 live cd). I tested the following install steps in a virtualbox vm prior to following the sames ones to upgrade my laptop: Download/burn ubuntu minimal cd (12mb one) Install ubuntu minimal sudo apt-get update sudo apt-get upgrade sudo apt-get ubuntu-desktop ubuntu-standard In the VM worked fine and I found myself with a working 9.10 ubuntu, network worked fine and I was able to test my backups and DropBox without a hitch (host was 9.04). When I followed the same steps on my laptop, everything worked up to after 9.10 being installed and working. As far as I can tell, everything besides eth0/wireless works. For some reason, I am unable to access the internet. Ping reports that over 99% of packets get lost (over an hour or so of pinging). This means for example that if I try hard enough, I can load a webpage but only at the cost of much patience... This happens both for a wired and wireless connection to my wrt310n (updated with latest firmware). At first I thought that it could be related to the ipv6 issues ppl have been experiencing however even after disabling ipv6 at the kernel level (through grub), I still get the issue. I do not think this is related to DNS issues or the likes since even when I ping my ISP's gateway IP, I have the same amount of packet loss. No DNS resolving should be required there. Access to my router works peachy with no packet loss there. I've tried different MTU values but to no avail. Note that this issue affects every web-enabled application: firefox, ping, synaptic, etc. The same hardware/router combo works with 9.04 but not with 9.10. In fact, when I did: sudo apt-get ubuntu-desktop ubuntu-standard after 9.10 minimal was installed, it downloaded over 400mb of packages without a hitch so my guess is that one of those packages either in ubuntu-desktop or ubuntu-standard is causing havok. Thoughts?

  Read the article

• scanner no longer working windows 7

  - by Sackling

  I have a windows 7 64 pro machine that for some reason no longer works with a brother all in one printer/scanner, when I try to scan. This happened seemingly out of nowhere. Printing still works. When I try to scan from photoshop, photoshop crashes. When I try to scan from device manager (which takes a really long time to access the printer) I get an error saying: "operation could not be completed. (error 0x00000015). the device is not ready. I tried uninstalling/reinstalling the printer and drivers. I have also run the brother driver cleaner and then reinstalled and get the same results every time. I had access to another HP all in one. And very strangely When I setup this new printer I have a similar issue that happens. I am able to print but when I try to scan from the HP tool nothing pops up. So my thoughts are it is something to do with the twain driver? But I don't know what to do or check. Any help is appreciated.

  Read the article

• Apache Proxy Pass and Web Sockets

  - by James

  I'm using Apache with the mod_proxy module to reverse proxy my Node.js application through to port 80, so that we can access it as an internal application. I have a file in sites-enabled which contains this: VirtualHost *:80> DocumentRoot /var/www/internal/ ServerName internal ServerAlias internal <Directory /var/www/internal/public/> Options All AllowOverride All Order allow,deny Allow from all </Directory> ProxyRequests off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8080/ retry=0 ProxyPassReverse / http://localhost:8080/ ProxyPreserveHost on ProxyTimeout 1200 LogLevel debug AllowEncodedSlashes on </VirtualHost> As I said, our application is written in Node.js and we're using socket.io to make use of web-sockets, as our application also contains realtime elements to it. The problem is, mod_proxy doesn't seem to handle web sockets and we get errors when trying to use them: WebSocket connection to 'ws://bloot/socket.io/1/websocket/nHtTh6ZwQjSXlmI7UMua' failed: Unexpected response code: 502 How can we fix this issue and keep sockets working, as the only way we can get it working currently is to access the site via ip:port which we don't want to do. Also, as a side question, how can I get ErrorDocument to work properly? Our error files are stored in /var/www/internal/public/error/ but they seem to get put through the proxy too?

  Read the article

• Windows XP mounting USB drive to same letter as previously mapped network drive

  - by GAThrawn

  Why does Windows always mount a USB drive as the next drive letter after the last physical drive, even when that letter is already taken by a mapped drive, and is there any way to improve this behaviour? What happens is I tend to use a few different flash drives on my PC, as well as having both a Blackberry and a personal phone that mount as USB drives when I plug them in to charge. Being on a corporate PC I also have a number of mapped network drives (some set by login script, some set as persistent mappings in my profile). When I first login I'll have drive letters like this: C: - Local Drive D: - DVD Drive G: - Login script mapped drive J: - Login script mapped drive When I plug the Blackberry in it'll mount two drives (one for onboard storage, one for the SD card) as E: and F:. If I then plug in another USB drive it will mount as G:, even though that's already taken by a network mapped drive. This leaves me with the following drives: C: - Local Drive D: - DVD Drive E: - USB drive (Blackberry) F: - USB drive (Blackberry) G: - Login script mapped drive [G: - USB drive - mounted but not visible in Explorer or command prompt] J: - Login script mapped drive I then have to go into Disk Management, find the new USB drive that's mounted to G: and re-assign it to another letter eg Z:, once this is done Auto-Play detects it and throws up its normal dialog, and its browseable in Explorer. While this is OK to do if you only use one or two USB drives and have admin access to your PC with your login account, its a total pain in the proverbial if you regularly use a whole load of different USB devices, and corporate policy means you have one account for your normal login (that only has User access to workstations), but have to use a different account for any privileged action. I realize that one possible reason for this is the difference between hardware which is mounted and assigned drive letters at the systen level, and mapped drives which are done at the user level. For USB devices that are already plugged in before login, then obviously they're mounted before Windows knows what network drives may be mapped. However if you plug the USB devices in after you're fully logged in and have drives mapped then Windows must know which letters are available?

  Read the article

• Archive software for big files and fast index

  - by AkiRoss

  I'm currently using tar for archiving some files. Problem is: archives are pretty big, contains many data and tar is very slow when listing and extracting. I often need to extract single files or folders from the archive, but I don't currently have an external index of files. So, is there an alternative for Linux, allowing me to build uncompressed archive files, preserving the file attributes AND having fast access list table? I'm talking about archives of 10 to 100 GB, and it's pretty impractical to wait several minutes to access a single file. Anyway, any trick to solve this problem is welcome (but single archives are non-optional, so no rsync or similar). Thanks in advance! EDIT: I'm not compressing archives, and using tar I think they are too slow. To be precise about "slow", I'd like that: listing archive content should take time linear in files count inside the archive, but with very little constant (e.g. if a list of all the files is included at the head of the archive, it could be very fast). extraction of a target file/directory should (filesystem premitting) take time linear with the target size (e.g. if I'm extracting a 2MB PDF file in a 40GB directory, I'd really like it to take less than few minutes... If not seconds). Of course, this is just my idea and not a requirement. I guess such performances could be achievable if the archive contained an index of all the files with respective offset and such index is well organized (e.g. tree structure).

  Read the article

• Why are folders disappearing in Windows XP?

  - by XenoFoxx

  I am researching a problem for a friend, and unfortunatly do not have direct access to his computer. I've tried to gather as much information as possible and I have researched it on various websites. I've not found anyone having the same problem my friend is having. So here goes: He has a media server in his home running Microsoft Windows XP. It has 3 drives, 1 for the OS and 2 for mass storage. Not long ago he went to access one of the mass storage media drives and it was empty, except for a single folder. His first assumption was that his roommate had deleted everything on the drive (excluding the remaining folder). He then checked the properties of the drive and it was still saying that the hard drive was nearly full. I told him to check the recycling bin, thinking that whoever deleted them didn't clear them from recycling and that they were still taking up space on the drive. My friend said the recycling bin was empty. So we have a drive that the Windows file management system says is empty (again except for the remaining folder), but the properties of the drive say it's mostly full. Now it gets weirder My friend tried to create a new folder on this drive and it auto-named itself "New Folder(1)" which means that it recognizes there is already a "New Folder" in that directory. He tried to rename it to a name that he KNEW was there previsouly, and Windows wouldn't allow it because it was a duplicate folder name. SO now it seems the folders are there, but not displaying in Windows Explorer. Both of us have no idea why this is occuring, why the folders vanished, why the one remaining folder didn't vanish, or how to make them visable again. Anyone else ever experience this? I can get more details if needed.

  Read the article

• How to HIDE "client denied by server configuration:" error in log

  - by Keith

  I want to block access to my web server by default as a precaution but I keep getting the following errors showing up in my error log. [Wed Jun 27 23:30:54 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/Edu.jar [Wed Jun 27 23:32:40 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/REST.jar [Wed Jun 27 23:35:39 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/Set.jar [Thu Jun 28 01:01:17 2012] [error] [client 58.218.199.227] client denied by server configuration: /home/www/default/proxyheader.php [Thu Jun 28 02:34:57 2012] [error] [client 58.218.199.227] client denied by server configuration: /home/www/default/proxy.php [Thu Jun 28 05:41:33 2012] [error] [client 58.218.199.227] client denied by server configuration: /home/www/default/proxyheader.php [Thu Jun 28 06:55:10 2012] [error] [client 180.76.6.20] client denied by server configuration: /home/www/default/ [Thu Jun 28 07:31:26 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/Edu.jar [Thu Jun 28 07:32:25 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/REST.jar [Thu Jun 28 07:36:10 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/Set.jar I don't really want these errors to show up but whatever I do, I can't get rid of them. Does anyone know how I can achieve this? Here is a copy of my configuration. <VirtualHost *:80> DocumentRoot /home/www/default <Directory /> AllowOverride None Order Deny,Allow Deny from all </Directory> #ErrorLog /var/log/apache2/error.log #LogLevel warn CustomLog /var/log/apache2/access.log combined </VirtualHost>

  Read the article

• Configure nginx for multiple node.js apps with own domains

  - by udo

  I have a node webapp up and running with my nginx on debian squeeze. Now I want to add another one with an own domain but when I do so, only the first app is served and even if I go to the second domain I simply get redirected to the first webapp. Hope you see what I did wrong here: example1.conf: upstream example1.com { server 127.0.0.1:3000; } server { listen 80; server_name www.example1.com; rewrite ^/(.*) http://example1.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example1.com; access_log /var/log/nginx/example1.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example1.com; proxy_redirect off; } } example2.conf: upstream example2.com { server 127.0.0.1:1111; } server { listen 80; server_name www.example2.com; rewrite ^/(.*) http://example2.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example2.com; access_log /var/log/nginx/example2.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example2.com; proxy_redirect off; } } curl simply does this: zazzl:Desktop udo$ curl -I http://example2.com/ HTTP/1.1 301 Moved Permanently Server: nginx/1.2.2 Date: Sat, 04 Aug 2012 13:46:30 GMT Content-Type: text/html Content-Length: 184 Connection: keep-alive Location: http://example1.com/ Thanks :)

  Read the article

• Install mod_perl2 on Apache 2.2.14 (Ubuntu10.04)

  - by MICADO

  I have installed via synaptic package ibapache2-mod-perl2. I tried this line in httpd.conf: "LoadModule perl_module modules/mod_perl.so" Apache tells me when I reload the server : "[warn] module perl_module is already loaded, skipping". Well ok, but when i try to look in the browser to a repertory i don't have access .Apache send me the error : Forbidden You don't have permission to access /cgi-bin/ on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.0.10 Port 90 But this should show modperl is installed and that's not the case... I would like my virtual host that follows run with mod_perl2 <VirtualHost v1:80> ServerAdmin webmaster@localhost ServerName v1 DocumentRoot /var/www/v1 <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/v1/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www/v1/cgi-bin/ <Directory "/var/www/v1/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> I'd like to know how to configure mod_perl2. Do i have to change something in the apache configuration file to make my cgi repertory works with mod_perl2? Thanks to any help!

  Read the article

• error creating MS Exchange distribution list: Active directory response: 00000005: SecErr: DSID-031521D0

  - by BabakBani

  We've migrated a client from google apps to an MS Exchange 2010 SP2 on-premise setup. The setup /prepareAD went well, and the software was installed with the Administrator account. We've used the Exchange Management Console to setup mailboxes and had to google up the appropriate workarounds such as going into each users Advanced Security Settings and selecting "include inheritable permissions from this object's parents", and changing their logon-to from specific machines to "all computers" so that they can connect to Outlook Web Access, and in turn so their Outlook 2007-2010 clients can connect to Exchange. Sending and receiving emails are working well. Now that all this is in place, we can create Dynamic Distrubution Lists with no problem, but as soon as we try and create a DISTRIBUTION LIST, either in the EMC or the Exchange PowerShell, we get an error. As the error message in the powershell is more verbose, I include this if anyone can suggest how we remedy this: [PS] C:\Windows\system32new-DistributionGroup -Name 'projects' -SamAccountName 'projects' -Alias 'projects' Active Directory operation failed on DC.cppe.local. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-DistributionGroup], ADOperationException + FullyQualifiedErrorId : 1EA5CD3E,Microsoft.Exchange.Management.RecipientTasks.NewDistributionGroup

  Read the article

• How to find out which program a default beep is coming from in Windows 7?

  - by leeand00

  There's a "default beep" (as defined in System Sounds) that emanates from my computer every so often. It kind of goes like this (where each number is a "default beep" sound): 1, 2, 3, 4, 5. So there's a distinct pattern to it. I thought I had this figured out a way to figure out what was happening by going to Control Panel-Ease of Access-Ease of Access Center-Replace sounds with visual cues But that just isn't the case. Whichever window I click on, that one displays the visual queue when this happens. It's driving me crazy, and I can't figure out which program is causing this. Update: it appears to only happen on one user profile on the computer...does that help? Update 2: Discovered that this sound was coming from a utility on my laptop called ASUS NB Probe; I'm certain that it is emanating from this program because the error message displayed by it changes in sync with the sound playing. Apparently the S.M.A.R.T. feature of my hard drive was reporting an issue. It displays the issue for a brief second and then makes it disappear, I'll have to keep watching it to see what it says, but I believe is says something about a read. I have an external hdd connected with eSATA to a container of sorts (BlacX) that you can plug two hdds into. I have one hdd attached and it's a Western Digital WD1001FALS - 00E8B0 Thanks again! Now I'm off to go around the Internet and report on this...since I posted it so many places!

  Read the article

• Pitfalls to using Gluster as a home/profile directory server?

  - by Bart Silverstrim

  I was asking recently about options for divvying up access to file servers, as we have a NAS solution that gets fairly bogged down when our users (with giant profiles, especially) all log in nearly simultaneously. I ran across Gluster and it looks like it can cluster different physical storage media into a single virtual volume and share it out like a virtual NAS from the client perspective and it support CIFS. My question is whether something like this would be feasible to use for home and profile directories in an active directory environment. I was worried about ACL's, primarily, as I didn't think CIFS was fine-grained enough to support NTFS permissions and it didn't look like Gluster exports those permission levels, just the base permissions for basic file sharing. I got the impression that using Gluster would allow for data to be redundant across multiple servers and would speed up access to the files under heavy load, while allowing us to dynamically boost storage capacity by just adding another server and telling Gluster's master node to add that server. Maybe I'm wrong with my understanding of it though. Anyone else use it or care to share how feasible this is?

  Read the article

• Permissions on mac for itunes library with multiple users - idea

  - by John

  I currently have a lot of music on an external drive and my itunes set up from there. However, periodically, when the external drive isn't connected, itunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my mac HD is large enough to house the music collection. However, I have 4 family members - all with their own logins - using this same gob of music. I don't want 4 copies of the library, only one with all libraries referencing it. So, what I want to do is: 1 - move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. 2 - get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let itunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the itunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any xml library file editing if possible. Am I dreaming? Thanks for help.

  Read the article

• Problem building PHP extension module

  - by tixrus

  I'm trying to get GD into my PHP. So I compiled it, made php.ini point to it, restarted apache etc. But no GD. So in apache error log it says PHP Warning: PHP Startup: gd: Unable to initialize module\nModule compiled with module API=20060613\nPHP compiled with module API=20090115\nThese options need to match\n in Unknown on line 0 So a bit of googling says I should not use the phpize I have before configuring and making these. I should use a new one called phpize5. I surely don't have any such thing. Unless its packed up inside something else in my php5.3. distro. Where do you get it. In Ubuntu I could just run sudo apt-get install php-dev, (apparently) and it would just appear by magic. At least that's what the webpage said. Unfortunately I am running MacOSX version Leopard. How can I build this GD module so that it will match the API number in my PHP?

  Read the article

• Mod_rewrite is ignoring the extension of a file

  - by ngl5000

  This is my entire mod_rewrite condition: <IfModule mod_rewrite.c> <Directory /var/www/> Options FollowSymLinks -Multiviews AllowOverride None Order allow,deny allow from all RewriteEngine On # force www. (also does the IP thing) RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} !^mysite\.com [NC] RewriteRule ^(.*)$ http://mysite.com/$1 [R=301,L] RewriteCond %{REQUEST_URI} ^system.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_URI} ^application.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)\.(\d+)\.(js|css|png|jpg|gif)$ $1.$3 [L] RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] RewriteCond %{REQUEST_URI} !^(/index\.php|/assets|/robots\.txt|/sitemap\.xml|/favicon\.ico) RewriteRule ^(.*)$ /index.php/$1 [L] # Block access to "hidden" directories or files whose names begin with a period. This # includes directories used by version control systems such as Subversion or Git. RewriteCond %{SCRIPT_FILENAME} -d [OR] RewriteCond %{SCRIPT_FILENAME} -f RewriteRule "(^|/)\." - [F] </Directory> </IfModule> It is suppose to allow only access to mysite.com(/index.php|/assets|/robots.txt|/sitemap.xml|/favicon.ico) The error was noticed with: mysite.com/sitemap vs mysite.com/sitemap.xml Both of these addresses are resolving to the xml file while the first url should be resolving to mysite.com/index.php/sitemap * For some reason mod_rewrite is completely ignoring the lack of an extension. It sounded like a Multiviews problem to me so I disabled Multiviews and it is still going on. ***And then a different rule will eventually take the index.php out, I am having another problem with an extra '/' being left behind when this happens. This httpd file is setting up for my codeigniter php framework

  Read the article

• How can I enable PHP5 for a site? Having problems with every single method.

  - by John Stephens

  I'm working on a client site that is hosted on someone's DIY Debian Linux server [Apache/1.3.33 (Debian GNU/Linux)], and I'm trying to install a script that requires PHP5. By default, the server parses .php files with PHP 4.3.10-22, which is configured at /etc/php4/apache/php.ini, according to phpinfo(). On the server I can see a config directory for PHP5 adjacent to the PHP4 directory: /etc/php5.0/apache2/php.ini. I have tried multiple methods to enable PHP5 for the document root where the site's files are hosted, including all available methods mentioned here. By far, the most common suggestion I've found is to add one or both of the following lines to the site's .htaccess file: AddHandler application/x-httpd-php5 .php AddType application/x-httpd-php5 .php Trouble is, when either or both of those lines are present, the site forces my browser to download any .php files requested, without parsing the PHP at all. All of the other methods mentioned in the above article cause a 500 Internal Server Error. There is no hosting control panel I can access in a browser to enable PHP5 for the site, but I do have shell access. When I asked the server administrator about this issue, he encouraged me to search for the answer on Google. Where could I begin to troubleshoot this issue? Are there ways to test or verify the server's specific PHP5 installation and configuration, using the command line or some other method? Do you have other suggestions to enable PHP5?

  Read the article

• Virtualization and best hardware sharing scenario for me

  - by azera

  Hello, Following this thread on super user, I now want to start installing all my vm on the hardware. As a remainder, i have a (powerful enough) server on which i want to install 3 OS: there is a debian (general dev testbed purposes), an ipcop (network control/firewall) and a freenas (local network file sharing). I'm wondering which scenario would be the best for me and if I will be able to share the hardware to do what i want; either a - install an hypervisor like the free vmware esx and all three vms in it, or b - install debian, and the other two running inside it with virtual box My need being that: the ipcop should handle all network traffic to the internet, meaning all traffic from my main computer but also all traffic from the other two vm the freenas shares should be accessible from the other two vm and my main computer too i don't really care about the debian access, i only need to access it from my main computer, not the other vms Will I need to install additionnal network cards for each vm or can they all share the same one happily ? (right now I have two, one linking the server to my router [which only ipcop is gonna use] and one linking it to my switch [which i would like all three to use]) As for harddrives, I was going to use 1 harddrive cut in 3 partitions to install all three OSes, then add to that the freenas drives, will it be correct ? Thanks a lot for anyone who can help me, this is kind of a vast area and I'm not sure which way to go at all

  Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >