Search Results

Search found 20283 results on 812 pages for 'security context'.

Page 542/812 | < Previous Page | 538 539 540 541 542 543 544 545 546 547 548 549  | Next Page >

• Galaxy Note II MTP on Ubuntu 12.04

  - by Anass Ahmed

  I bought a branding new Galaxy Note II and I tried to mount its storage to my ubuntu laptop. As you know, Android 4.0+ uses MTP by default. Android 4.1 doesn't support USB Mass Storage anymore! So I have to use MTP to open my files via USB. I followed this article to get it work. It worked only for External Memory Card. but the internal cannot be reached! $mount /dev/sda3 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /media/Islamics type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda8 on /media/Technology type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda7 on /media/Misc type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/anass/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=anass) gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev) mtpfs on /media/GalaxyNote2 type fuse.mtpfs (rw,nosuid,nodev,allow_other,user=anass)

  Read the article

• Can Clojure's thread-based agents handle c10k performance?

  - by elliot42

  I'm writing a c10k-style service and am trying to evaluate Clojure's performance. Can Clojure agents handle this scale of concurrency with its thread-based agents? Other high performance systems seem to be moving towards async-IO/events/greenlets, albeit at a seemingly higher complexity cost. Suppose there are 10,000 clients connected, sending messages that should be appended to 1,000 local files--the Clojure service is trying to write to as many files in parallel as it can, while not letting any two separate requests mangle the same single file by writing at the same time. Clojure agents are extremely elegant conceptually--they would allow separate files to be written independently and asynchronously, while serializing (in the database sense) multiple requests to write to the same file. My understanding is that agents work by starting a thread for each operation (assume we are IO-bound and using send-off)--so in this case is it correct that it would start 1,000+ threads? Can current-day systems handle this number of threads efficiently? Most of them should be IO-bound and sleeping most of the time, but I presume there would still be a context-switching penalty that is theoretically higher than async-IO/event-based systems (e.g. Erlang, Go, node.js). If the Clojure solution can handle the performance, it seems like the most elegant thing to code. However if it can't handle the performance then something like Erlang or Go's lightweight processes might be preferable, since they are designed to have tens of thousands of them spawned at once, and are only moderately more complex to implement. Has anyone approached this problem in Clojure or compared to these other platforms? (Thanks for your thoughts!)

  Read the article

• EPM Architecture: Reporting and Analysis

  - by Marc Schumacher

  Reporting and Analysis is the basis for all Oracle EPM reporting components. Through the Java based Reporting and Analysis web application deployed on WebLogic, it enables users to browse through reports for all kind of Oracle EPM reporting components. Typical users access the web application by browser through Oracle HTTP Server (OHS). Reporting and Analysis Web application talks to the Reporting and Analysis Agent using CORBA protocol on various ports. All communication to the repository databases (EPM System Registry and Reporting and Analysis database) from web and application layer is done using JDBC. As an additional data store, the Reporting and Analysis Agent uses the file system to lay down individual reports. While the reporting artifacts are stored on the file system, the folder structure and report based security information is stored in the relational database. The file system can be either local or remote (e.g. network share, network file system). If an external user directory is used, Reporting and Analysis services also communicate to this directory. The next post will cover WebAnalysis.

  Read the article

• Is there a command-line utility app which can find a specific block of lines in a text file, and replace it?

  - by fred.bear

  UPDATE (see end of question) The text "search and replace" utility programs I've seen, seem to only search on a line-by-line basis... Is there a command-line tool which can locate one block of lines (in a text file), and replace it with another block of lines.? For example: Does the test file file contain this exact group of lines: 'Twas brillig, and the slithy toves Did gyre and gimble in the wabe: All mimsy were the borogoves, And the mome raths outgrabe. 'Beware the Jabberwock, my son! The jaws that bite, the claws that catch! Beware the Jubjub bird, and shun The frumious Bandersnatch!' I want this, so that I can replace multiple lines of text in a file and know I'm not overwriting the wrong lines. I would never replace "The Jabberwocky" (Lewis Carroll), but it makes a novel example :) UPDATE: ..(sub-update) My following comment about reasons when not use sed are only in the context of; don't push any tool too far beyond its design intent (I use sed quite often, and consider it to be invaluable.) I just now found an interesting web page about sed and when not to use it. So, because of all the sed answers, I"ll post the link.. it is part of the sed FAQ on sourceforge Also, I'm pretty sure there is some way diff can do the job of locating the block of text (once it's located, the replacement is quite straight foward; using head and tail) ... 'diff' dumps all the necessary data, but I haven't yet worked out how to filter it , ... (I'm still working on it)

  Read the article

• CodePlex Daily Summary for Saturday, March 24, 2012

  CodePlex Daily Summary for Saturday, March 24, 2012Popular Releasesmenu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Indiefreaks Game Framework: 0.9.2.0: Feature: Added SunBurn engine v2.0.18.7 support (doesn't support versions below). Feature: Added GammaCorrection Post processor to allow developers or even players to tweak the Gamma of the game depending on their screen (courtesy of bamyazi) Feature: Added Windows, Xbox 360 & WP7 enabled StorageManager (based on Nick Gravelyn's EasyStorage) to read/write files for player or game data. Feature: Added VirtualGamePad feature for WP7 allowing developers to define Touch areas on screen and mapped...Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LLBLGen LINQPad Data Context Driver Version 2.1: Sixth release of a LLBLGen Pro Typed Data Context Driver for LINQPad. For LLBLGen Pro versions 3.1 and 3.5(coming). New features:When you switch the query language to SQL, LINQPad updates the Schema Explorer to show SQL column names rather than CLR property names Connection dialog unloads assemblies when it has closed down so they are no longer locked - this allows them to be rebuilt while LINQPad is still open Connection dialog includes a button to quickly add assemblies needed for the...People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Image 3D Viewer: Image 3D Viewer: WPF .Net 3.5 .Net 4 .Net 4.5Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTNew ProjectsAsp.NET Url Router: 1.Url rewritting. 2.Provider regex matcher 3.Support custom url validate handler.BC-Web: ch projectCape: Dynamically generates Capistrano recipes for Rake tasks.cstgamebgs: Project for wp7GCalculator: GCalculator for performing basic arithmetic operations. Windows Sidebar Gadget invacc: Invacc- for inventory and Account Onlineirgsh-node: Worker nodes of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-repo: Repository manager node of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-web: Web interface and task manager of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/Kinect Explorer For SharePoint 2010: Kinect Explorer for SharePoint is a tool which provide Natural User Interface to browse through SharePoint sites. Use body gestures to browse, read, move, copy documents. Use Speech services to read-out the files.MCU: mcu devMVC3ShellCode: MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode NetWatch: NetWatch - network watchdog Small application primary designed for network connectivity monitoring. You can configure set of network tests (ping, http, ...) and time plan for this tests. Application is running in windows notification area and notife you each problem. NMortgage: The goal of this project will be to give a prospective home buyer or an existing home owner the insight they need to explore effects of different repayment strategies or different mortgage structures. Nucleo.NET MVP: The Nucleo MVP framework provides a Model-View-Presenter approach that isn't obtrusive, can be utilized in multiple environments, and is versatile. Providing a lot of features you see in other frameworks, the Nucleo MVP framework provides many extensibility points, pretty much allowing you to rewrite most of the framework. It features dynamic injection support, presenter and view initializers (like what you see in ASP.NET MVC), model property injection, attribute- and convention-based vie...P2PShare: This project is to build a new and moden System for p2p file shearing supporting downloads from HTTP, HTTPS, FTP support for P2Pshare client list servers so files can point to a server or a host only file so no servers are used and only p2p is usedPipeLayer: proyecto de sistemas inteligentespython-irgsh: Python library for BlankOn Package Factory - http://irgsh.blankonlinux.or.id/RamGec XNA Controls - Window Elements Library for XNA Solutions: Lightweight, ultra-high performance and flexible library for displaying and managing Window Controls for XNA system. Features its own Window Designer for creating custom windows and controls.RPG Character Generators and Tools: Various tools for pen and paper style role playing games.Screen scraper: A program that can be used to download public domain MP3 and other media such as pdf documents.SharePoint Bdc request library: The given set of classes simplifies an access to the external data, which can be reached through BDC. The library allows to make simple requests for values from external data source, using a BDC Entity Instance Identifier(s) or a value of a certain BDC Entity field. Developed to interact with Business Data Connectivity of SharePoint 2010.testtom03232012git01: testtom03232012git01testtom03232012git02: testtom03232012git02the north star uc: University projectTyphon: Typhon is a role playing simulation management application, much like Nova, but written in MVC/C#.VRE LabTrove-SharePoint connector: The VRE LabTrove-SharePoint Connector provides a means of integrating the ability to view, post to, and edit posts stored in a LabTrove electronic laboratory notebook from within the familiar environment of Microsoft SharePoint. Once installed and configured, these Web Parts give SharePoint users a straightforward way to interact with any LabTrove installation that they wish to use. They also facilitate users to attach data that is stored in a SharePoint Document Library to the LabTrove posts...

  Read the article

• Topeka Dot Net User Group (DNUG) Meeting &ndash; April 6, 2010

  - by Robz / Fervent Coder

  Topeka DNUG is free for anyone to attend! Mark your calendars now! SPEAKER: Troy Tuttle is a self-described pragmatic agilist, and Kanban practitioner, with more than a decade of experience in delivering software in the finance and health industries and as a consultant. He advocates teams improve their performance through pursuit of better practices like continuous integration and automated testing. Troy is the founder of the Kansas City Limited WIP Society and is a speaker at local area groups on team related topics. He currently works as a Project Lead Consultant with AdventureTech Group of Kansas City, KS. TOPIC: Why Kanban? Kanban is receiving a large amount of attention recently. What does it offer compared to other approaches? Answering that question may require you to hit the “reset” button on previously held biases and assumptions. Kanban blends Lean thought with ideas from first generation agile methodologies. To get started with Kanban, we will examine what steps are necessary to establish a transparent, work-limited, pull system. We will highlight the perils of allowing too much work-in-progress and how it affects development performance. Once established, Kanban teams need only a few metrics and tools to monitor their performance and improvement. WHERE: Federal Home Loan Bank Topeka on the Security Benefit Campus – Directions? WHEN: 11:30 AM - 1:00 PM on April 6th, 2010 REGISTER: http://topekadotnet.wufoo.com/forms/topeka-dnug-meeting-attendance/ ADDITIONAL INFO: As always, please sign in and out of FHLBank to help them with their accountability. Please park in the visitors section at the front of the building when you arrive. If  there are no spots in visitors you may park in the overflow lot at the far east end of the facility.  Lunch will be provided and we will have some great door prizes!

  Read the article

• OpenGL ES Loading

  - by kuroutadori

  I want to know what is the norm of loading rendering code. Take a button. When the application is loaded, a texture is loaded which has the image of the button on it. When the button is tapped, it then adds a loader into a queue, which is loaded on render thread. It then loads up an array buffer with vertexes and tex coords when render is called. It then adds to a render tree. Then it renders. the render function looks like this void render() { update(); mBaseRenderer->render(); } update() is when the queue is checked to see if anything needs loading. mBaseRenderer->render() is the render tree. What I am asking then is, should I even have the update() there at all and instead have everything preloaded before it renders? If I can have it loaded when need, for instance when there is tap, then how can it be done (My current code causes an dequeueing buffer error (Unknown error: -75) which I assume is to do with OpenGL ES and the context)?

  Read the article

• Partner Showcase -- GreyHeller

  - by PeopleTools Strategy

  This is the next in a series of posts spotlighting some of our creative partners.  GreyHeller is a PeopleSoft-focused software company founded by PeopleTools alumni Larry Grey and Chris Heller.  GreyHeller’s products focus on addressing the technology needs of PeopleSoft customers in the areas of mobile Enablement, reporting/business intelligence, security, and change management.  The company helps customers protect and extend their investment in PeopleSoft.GreyHeller’s products and services are in use by nearly 100 PeopleSoft customers on 6 continents.  Their product solutions are lightweight bolt-ons--extensions to a customer’s PeopleSoft environment requiring no new infrastructure.  This makes for rapid implementations.A major area of interest for PeopleSoft customers these days is mobile enablement.  GreyHeller's current mobile implementations include the following customers: Texas Christian University (Live:  TCU student newspaper article here) Coppin State University (Live) University of Cambridge (June go-live) HealthSouth (June go-live) Frostburg State Univrsity (Q3 go-live) Amedisys (Q3 go-live) GreyHeller maintains a PeopleTools-focused blog that provides tips, techniques, and code snippets aimed at helping PeopleSoft customers make the most of their PeopleSoft system.  In addition to their blog, the GreyHeller team conducts and records weekly webinars that demonstrate latest PeopleTools features and Tips and techniques.  Recordings of these webinars can be accessed here.Visit GreyHeller’s web site for more information on the company and its work.

  Read the article

• Bazaar - pull the last revision only (and not the whole branch)

  - by Sandman4

  Shortly: How can I take the latest revision (only) from a remote bazaar repository and add it as a new revision to a local repository. Background: I have a development system and a production system. On a development system there's a bazaar repository having branch with lots of development revisions. Once in a while I want to incorporate the latest developments into production system. I want to do so by some sort of "pulling" (development system can not connect to production for security reasons, but production can initiate connection to development). On the production, I don't want the whole development revision history, only those revisions which actually go into production (normally it's the branch tip). Yet I want version control on the production system to keep track of what actually goes into production each time. bzr pull pulls the whole branch. bzr pull --revision=last:1 also pulls the whole branch, up to the specified revision. bzr merge --pull --revision=last:1 also pulls the whole branch. bzr merge --pull --revision=last:2..last:1 and bzr merge --pull --change=last:1 both pull only the new changes introduced in the latest revision, but not changes introduced in the older revisions. With lightweight checkout I have no track of revisions which are pulled into production - local working tree remains part of the remote repository The only way I see so far is importing the working tree using some rsync or scp and committing them to a local branch afterwards. Any better ideas ?

  Read the article

• Removed Java replaced with newest "Sun Java", disc won't boot, and won't let me re-install grub using boot repair disc

  - by Al Rowe

  Had a minor problem with my Stock market platform. Set-up screen would freeze program. Called their tech support, got their "Linux guy", who advised remove all Java and replace, not with synaptic version, but newest Sun Java. After removing, computer auto rebooted, and went to blue mem-test screen. Showed no errors, but couldn't get back in. Tried two versions of boot repair disc from iso (checked md5sum, showed good.), but fix aborted, giving apt-error detected. Opened a terminal and typed (or copy/paste): sudo chroot "/mnt/boot-sav/sda1" apt-get -f install. My system is Ubuntu 12.04. Had a few very minor issues from install, all fixed. Also added some of my favorite gnome tricks just to make life easier, but none that could have caused this. Added script to add shortcuts to desktop, open terminal in any menu from inside it, access root terminal, etc. System was firewalled and using avast antivirus (o.k., I'm paranoid. Used to do Windows sys-op and security.) But relative newbie to Linux.

  Read the article

• Reverse WiFi to Broadcast connection coming from a USB device

  - by Daniel Clem

  I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

  Read the article

• Today's Links (6/28/2011)

  - by Bob Rhubart

  Connecting People, Processes, and Content: An Online Event | Brian Dirking Dirking shares information on an Oracle Online Forum coming up on July 19. Social Relationships don't count until they count | Steve Jones "It's actually the interactions that matter to back up the social experience rather than the existence of a social link," says Jones. ORACLENERD: KScope 11: Cary Millsap Commenting on Cary Millsap's KScope presentation on Agile, Oracle ACE Chet Justice says, "I fight with methodology on a daily basis, mostly resulting in me hitting my head against the closest wall." The Sage Kings of Antiquity | Richard Veryard "Given that the empirical evidence for enterprise architecture is fairly weak, anecdotal and inconclusive, we are still more dependent than we might like on the authority of experts," says Veryard, "whether this be semi-anonymous committees (such as TOGAF) or famous consultants (such as Zachman)." Oracle Business Intelligence Blog: New BI Mobile Demos "These are short videos that showcase some of the capabilities in our mobile app," says Abhinav Agarwal. "One focuses on the Oracle BI platform, while the other showcases what is possible with the mobile app accessing Oracle Business Intelligence Applications, like Financial Analytics." MySQL HA Events in the UK, Germany & France | Oracle's MySQL Blog Oracle is running MySQL High Availability breakfast seminars in London (June 29), Düsseldorf (July 13) and Paris (September 7). "During these free seminars, we will review the various options and technologies at your disposal to implement highly available and highly scalable MySQL infrastructures, as well as best practices in terms of architectures," says Bertrand Matthelié. VENNSTER BLOG: User Experience in Fusion apps "When I heard about the Fusion Applications User Experience efforts, I was skeptical," says Oracle ACE Director Lonneke Dikmans of Vennster "My view of Oracle and User Experience has changed drastically today." Power Your Cloud with Oracle Fusion Middleware Running in over 50 cities across the globe, this event is aimed at Architects, IT Managers, and technical leaders like you who are using Fusion Middleware or trying to learn more about middleware in the context of Cloud computing.

  Read the article

• Everybody's Heard About the Bird: OTN ArchBeat Top Tweets for June 2013

  - by Bob Rhubart

  Your clicks count! Here at the Top 10 most popular tweets for June 2013 from @OTN ARchBeat on Twitter. Oracle #SOA Suite 11g Developers Cookbook Published | Antony Reynolds Jun 28, 2013 at 12:25 PM Notes on Oracle #BPM PS6 Adaptive Case Management | Graeme Colman Jun 24, 2013 at 11:55 AM Calling #ADF BC Web Service from #BPM Process | @AndrejusB Jun 24, 2013 at 12:12 PM ZDNet's @JoeMcKendrick interviews #SOA guru and author Thomas Erl (@soaschool). Jun 25, 2013 at 08:33 AM Two Weeks and counting: OTN Architect Day: Cloud Computing - July 9 - Redwood Shores, CA. Registration is free. Jun 25, 2013 at 06:00 PM Changing #WebLogic Server Deployment Order using #MBeans | @ArtofBI Jun 24, 2013 at 12:07 PM Getting Started with #WebCenter Portal — Content Contribution Project — Part 2 | Husain Dalal #fusionmiddleware Jun 24, 2013 at 09:58 AM Your next boss may not be the CIO, or any other IT manager for that matter | ZDNet Jun 25, 2013 at 02:00 PM Single Sign-On with Security Assertion Markup Language between Oracle and SAP | Ronaldo Fernandes Jun 26, 2013 at 04:08 PM RT @oracletechnet: It's Not TV, It's OTN: Top 10 Videos on the OTN YouTube Channel Jun 27, 2013 at 09:06 AM Thought for the Day "At some point you have to decide whether you're going to be a politician or an engineer. You cannot be both. To be a politician is to champion perception over reality. To be an engineer is to make perception subservient to reality. They are opposites. You can't do both simultaneously. " — H. W. Kenton Source: softwarequotes.com

  Read the article

• MySQL - Configuration

  - by Stuart Brierley

  Having previously detailed how to install MySQL Server, the next step is configuring MySQL. The MySQL configuration wizard can either be run immediately following installation from the MySQL installation wizard or manually from the Start Menu. Following the splash screen you can then choose whether to run a detailed or standard configuration. The detailed configuration allows you to create the optimal configuration for your specific machine, whereas the standard configuration creates a general configuration that can then be manually tuned. I chose detailed.   You are then asked to choose the type of server instance that is being configured. In this case it is a developer machine. Following this you are asked to choose the type of database usage that you expect on the server. I opted for multifunctional. You must then specify the location of the InnoDB tablespace.   Next specify the number of concurent connections to the server.   Now you must configure the networking options. I left the Strict mode enabled as this is the recommended option, but I disabled TCP/IP networking as I wanted to restrict this MySQL installation to the local machine only.   Set the character set that is best suited to your use - for me this was the default standard character set. Next up is the option to run MySQL as a service and whether or not to include the mysql dircetories in the windows PATH. I kept the install as a windows service option enabled, but unchecked the Launch MySQL server automatically option. This is because I only wanted MySQL running when I specifically want to use it. I also enabled the include in windows PATH option.   You can then change the security settings for the mysql installation. I opted to change the root password, disable root from local machines and disable annoymous access.   You are now ready to execute the configuration.   Once completed you should hopefully see the completed screen with lots of nice ticks against the various configuration tasks.

  Read the article

• The premier support for Sun Cluster 3.1 ended

  - by JuergenS

  In October 2011 the premier support for Sun Cluster 3.1 ended. See details in Oracle Lifetime Support Policy for Oracle and Sun System Software document. There no 'Extended Support' and the 'Sustaining Support Ends' is indefinite. But for indefinite 'Sustaining Support' I like to point out from the mentioned document (version Sept. 2011) on page 5: Sustaining Support does NOT include: * New program updates, fixes, security alerts, general maintenance releases, selected functionality releases and documentation updates or upgrade tools * Certification with most new third-party products/versions and most new Oracle products * 24 hour commitment and response guidelines for Severity 1 service requests *Previously released fixes or updates that Oracle no longer supports This means Solaris 10 9/10 update9 is the last qualified release for Sun Cluster 3.1. So, Sun Cluster 3.1 is not qualified on Solaris 10 8/11 Update10. Furthermore there is an issue around with SVM patch 145899-06 or higher. This SVM patch is part of Solaris 10 8/11 Update10. The 145899-06 is the first released patch of this number, therefore the support for Sun Cluster 3.1 ends with the previous SVM patches 144622-01 and 139967-02. For details about the known problem with SVM patch 145899-06 please refer to doc 1378828.1. Further this means you should freeze (no patching, no upgrade) your Sun Cluster 3.1 configuration not later than Solaris 10 9/10 update9. Or even better plan an upgrade to Solaris Cluster 3.3 now to get back to full support.

  Read the article

• Library Organization in .NET

  - by Greg Ros

  I've written a .NET bitwise operations library as part of my projects (stuff ranging from get MSB set to some more complicated bitwise transformations) and I mean to release it as free software. I'm a bit confused about a design aspect of the library, though. Many of the methods/transformations in the library come with different endianness. A simple example is a getBitAt method that regards index 0 as the least significant bit, or the most significant bit, depending on the version used. In practice, I've found that using separate functions for different endianness results in much more comprehensible and reusable code than assuming all operations are little-endian or something. I'm really stumped regarding how best to package the library. Should I have methods that have LE and BE versions take an enum parameter in their signature, e.g. Endianness.Little, Endianness.Big? Should I have different static classes with identically named methods? such as MSB.GetBit and LSB.GetBit On a much wider note, is there a standard I could use in cases like this? Some guide? Is my design issue trivial? I have a perfectionist bent, and I sometimes get stuck on tricky design issues like this... Note: I've sort of realized I'm using endianness somewhat colloquially to refer to the order/place value of digital component parts (be they bits, bytes, or words) in a larger whole, in any setting. I'm not talking about machine-level endianness or serial transmission endianness. Just about place-value semantics in general. So there isn't a context of targeting different machines/transmission techniques or something.

  Read the article

• How to build the mainline kernel source package?

  - by Maxime R.

  Ubuntu kernel PPA only provides linux-headers*.deb and linux-image*.deb packages. How can I build the corresponding linux-source*.deb package ? Context: I'm currently running Ubuntu 11.10 with the mainline kernel (3.2 rc6 now) to get a better support for my sandybridge IGP (Dell E6420 laptop with intel i5-2520M CPU). Appears, i'd like to install this touchpad driver, ALPS touchpads being badly supported (see previous link bug report), while waiting for upstream support in kernel version 3.3. Problem is, DKMS keeps complaining about not finding the full kernel source: Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. Appears I may not need the full source but I'd still like to try having it installed to see if it solve my problem. What I tried : Uncompressing the kernel.org source archive in /usr/src/. DKMS still complaining. Manually updating the kernel source package with uupdate and the mainline source package like explained here. Did not succeed. Manually building the linux-source package following @roadmr and @elmicha instructions. I eventually succeeded to build it but DKMS still complained about the missing source. At last I noticed an error I did not catch in the first place while reinstalling the kernel headers. Appears the .deb I got may have been corrupted, downloading it again did the trick :) Alas, while DKMS agreed to compile the module i ran into the following error which appears to have already been reported. This issue isn't yet solved but I won't try to because of the following: in the end I decided to test the precise kernel version 3.2-rc6 through the xorg-edgers ppa which appears to be correctly patched: it works. Nevertheless, it might still be of some interest to know how to build the mainline linux-source package as the Ubuntu Kernel Team doesn't provide it. Not to mention that I learned a lot in the process ^^

  Read the article

• Event notifications for Reporting Systems

  - by Marc Schluper

  The last couple of months I have been working on an application that allows people to browse a data mart. Nice, but nothing new. In this context I have an idea that I want to publish before anyone else patents it: event notifications. You see, reporting systems are not used as much as we’d like. Typically, users don’t know where to look for reports that might interest them. At best, there are some standard reports that people generate every so often, i.e. based on a time trigger. Or some reporting systems can be configured to send monthly reports around, for convenience. But apart from that, the reporting system is just sitting there, waiting for the rare curious user who makes the effort to dig a bit for treasures to be found. Wouldn’t it be great if there were data triggers? Imagine we could configure the reporting system to let us know when something interesting has happened. It would send us a message containing a link that would take us to the relevant section of the reporting system, showing a report with all the data pertaining to that event, preparing us for proper actions. Here in the North West this would really be great. You see, it rains here most of the time from October to June, so why even check the weather forecast? But sometimes, sometimes it snows. And sometimes the sun shines. So rather than me going to the weather site and seeing over and over again that it will be raining, making me think “why bother?” I’d like to configure the weather site so that it lets me know when the rain stops. Now, hopefully nobody has patented this idea already. Let me know.

  Read the article

• Antenna Aligner Part 3: Kaspersky

  - by Chris George

  Quick one today. Since starting this project, I've been encountering times where Nomad fails to build my app. It would then take repeated attempts at building to then see a build go through successfully. Rob, who works on Nomad at Red Gate, investigated this and it showed that certain parts of the message required to trigger the 'cloud build' were not getting through to the Nomad app, causing the HTTP connection to stall until timeout. After much scratching heads, it turns out that the Kaspersky Internet Security system I have installed on my laptop at home, was being very aggressive and was causing the problem. Perhaps it's trying to protect me from myself? Anyway, we came up with an interim solution why the Nomad guys investigate with Kaspersky by setting Visual Studio to be a trusted application with the Kaspersky settings and setting it to not scan network traffic. Hey presto! This worked and I have not had a single build problem since (other than losing internet connection, or that embarrassing moment when you blame everyone else then realise you've accidentally switched off your wireless on the laptop).

  Read the article

• SharePoint 2010 in the cloud a.k.a. SharePoint Online

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). There are 3 ways to run SharePoint On premises, you buy the servers, and you run the servers. Hosted servers, where you don’t run the servers, but you let a hosting company run dedicated servers. Multi-tenant, like SharePoint online – this is what I am talking about in this blog post. Also known as SaaS (Software as a Service). The advantages of a cloud solution are undeniable. Availability, (SharePoint line offers a 99.9% uptime SLA) Reliability. Cost. Due to economies of scale, and no need to hire specialized dedicated staff. Scalability. Security. Flexibility – grow or shrink as you need to. If you are seriously considering SharePoint 2010 in the cloud, there are some things you need to know about SharePoint online. What will work - OOTB Customization, collaboration features etc. will work SharePoint Designer 2010 is supported, so no code workflows will work Visual Studio sandbox solutions, client object model will work. What won’t work - SharePoint 2010 online cloud environment supports only sandbox solutions. BCS, business connectivity services is not supported in SharePoint online. What you can do however is to host your services in Azure, and call them using Silverlight. Custom timer jobs will not work. Long story short, get used to Sandbox solutions – and the new way of programming. Sandbox solutions are pretty damn good. Most of the complaints I have heard around sandbox solutions being too restrictive, are uninformed mechanisms of doing things mired in the ways of 2002. .. or you could just live in 2002 too. Comment on the article ....

  Read the article

• SOA Cloud and Service Technology Symposium December 4-5th 2013 in Mexico

  - by JuergenKress

  Do you want to attend the SOA; Cloud and Service Technology Symposium December 4-5th 2013 in Mexico? Please feel free to use the promotional code “Q14CB324” for a 50% discount. Here are the Conference presentations from Partners and Oracle: "Cloud Service Brokers" Jürgen Kress, Oracle, Rolando Carrasco, S&P Solutions "Fast Data - Delivering High-Velocity and Volume Big Data Business Value in Real Time" Robin Smith, Oracle, Robert Greene, Oracle "Unlocking the Value of Big Data" Raul Goycoolea Seoane, Oracle "Modeling Business Process Architecture on BPMN 2.0 and Decomposing it to Service Inventory" Jorge Heredia, Itehl Consulting "BPM and Dynamic/Adaptive Case Management - Friends or Foes?" Manas Deb, Oracle "Building SOA and MDM Solutions to Enable Cloud Adoption" Luis Weir, HCL, John Dunn, HCL "Secure Applications in the Cloud: Security & Privacy Patterns and Mechanisms" Ricardo Puttini, University of Brasília, Anderson Nascimento, University of Brasília "SOA, Data Grids, Mobile and Clouds - Where Next for SOA?" Matt Brasier, C2B2 Consulting LTD "Achieving Greater Responsiveness with BPM" Andre Boaventura, Oracle Do you want to meet the Oracle team at the conference? Please send us a message on twitter @soacommunity. Do you want to network at the conference? Please use the #soacommunity. For details and registrations please visit the conference website. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: SOA Symposium,Thmas Erl,Service Technolgy Symosium,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• How to Get a Smartphone-Style Word Suggestion on Windows

  - by Zainul Franciscus

  Have you ever wished that you can type faster and better in Windows ? Then you’re in luck, because today we’ll show you how to get a smartphone’s word suggestion in Windows. To accomplish that, you need to install AI Type, a software that gives word suggestion when you write in Windows.  AI Type not only fulfils our gratification to have a smartphone-style word suggestion for Windows,  AI Type also improves our writings by suggesting word according to its context. It  will also try to match words according to the  probability in which other users may have used it. Installing AI Type is a breeze; Just download the installer from AI Type website, run the executable, fill in a registration form, and you’re all set to use AI Type for your daily writing. Once you’re done with the installation, AI Type appears on your system tray. Latest Features How-To Geek ETC Macs Don’t Make You Creative! So Why Do Artists Really Love Apple? MacX DVD Ripper Pro is Free for How-To Geek Readers (Time Limited!) HTG Explains: What’s a Solid State Drive and What Do I Need to Know? How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Sync Blocker Stops iTunes from Automatically Syncing The Journey to the Mystical Forest [Wallpaper] Trace Your Browser’s Roots on the Browser Family Tree [Infographic] Save Files Directly from Your Browser to the Cloud in Chrome and Iron The Steve Jobs Chronicles – Charlie and the Apple Factory [Video] Google Chrome Updates; Faster, Cleaner Menus, Encrypted Password Syncing, and More

  Read the article

• Cannot install Ubuntu on an Acer Aspire One 756

  - by Byron807

  I have used Ubuntu before, in virtual machines, but today I decided to make the leap and I bought a netbook to install Ubuntu as a "real" OS alongside Windows. The netbook I bought is an Acer Aspire One 756, with a 64-bit Intel processor, 4GB RAM, and Windows 8 as the default OS. I have now encountered several obstacles that actually prevent me from installing Ubuntu 12.10. Here are all the things I have tried so far: Used a live CD, in combination with a USB DVD drive. (I should point out that the Aspire One does not have an optical drive.) The computer does not boot in Ubuntu; the drive keeps spinning, but nothing happens, even though I changed the boot order in the BIOS. Used a USB drive created via the tool available on pendrivelinux.com. Again, I've made changes to the BIOS to make sure the computer tries to boot from USB before using the built-in HDD. The results vary in this case: sometimes, the computer keeps rebooting like crazy until I remove the USB drive, at which point the computer boots into Windows 8, as expected. If I use a different USB drive, I get an error message that says that the USB drive has been blocked due to "the current security policy". Tried to install Ubuntu via Wubi. The program appears to install something, but at some point during the installation process, I get a non-specified error message and nothing else happens. I am not sure if these are known issues; in any case, searching the forum has not yielded any results, so I thought I should simply describe my problem here in the hope that this question has not been answered before. I would greatly appreciate any help with this annoying problem. Of course, if anything is unclear, do not hesitate to ask for further details.

  Read the article

• Effortlessly resize images in Orchard 1.7

  - by Bertrand Le Roy

  I’ve written several times about image resizing in .NET, but never in the context of Orchard. With the imminent release of Orchard 1.7, it’s time to correct this. The new version comes with an extensible media pipeline that enables you to define complex image processing workflows that can automatically resize, change formats or apply watermarks. This is not the subject of this post however. What I want to show here is one of the underlying APIs that enable that feature, and that comes in the form of a new shape. Once you have enabled the media processing feature, a new ResizeMediaUrl shape becomes available from your views. All you have to do is feed it a virtual path and size (and, if you need to override defaults, a few other optional parameters), and it will do all the work for you of creating a unique URL for the resized image, and write that image to disk the first time the shape is rendered: <img src="@Display.ResizeMediaUrl(Path: img, Width: 59)"/> Notice how I only specified a maximum width. The height could of course be specified, but in this case will be automatically determined so that the aspect ratio is preserved. The second time the shape is rendered, the shape will notice that the resized file already exists on disk, and it will serve that directly, so caching is handled automatically and the image can be served almost as fast as the original static one, because it is also a static image. Only the URL generation and checking for the file existence takes time. Here is what the generated thumbnails look like on disk: In the case of those product images, the product page will download 12kB worth of images instead of 1.87MB. The full size images will only be downloaded as needed, if the user clicks on one of the thumbnails to get the full-scale. This is an extremely useful tool to use in your themes to easily render images of the exact right size and thus limit your bandwidth consumption. Mobile users will thank you for that.

  Read the article

• Apple's Java Mac OS X 2012-006 Update

  - by Sharon Zakhour

  The recent Java Mac OS X 2012-006 update from Apple removes the Apple Java 6 plug-in from your Mac. The Mac OS X Install FAQ will be updated with the next 7u release, but you may find the following information useful in the meantime. Q: I have installed Java for OS X 2012-006 and Apple Java 6 can no longer be used for applets or Web Start. How do I get it back? A: The Java for OS X 2012-006 update from Apple uninstalls the Apple-provided Java applet plug-in from all web browsers. You can download the latest version of Java from Oracle, which has improved security, reliability and compatibility. If you prefer to continue using Apple's Java 6 plug-in, you can follow the steps provided in How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality. Q: After installing Java for OS X 2012-006, can I continue to use Apple's Java 6 alongside the OS X JDK or JRE for Java 7? A: If you want to continue to develop with Java 6 in a Terminal window you can modify the startup script for your favorite command environment. For bash, use this: export JAVA_HOME=`/usr/libexec/java_home -v 1.6` Some applications use /usr/bin/java to invoke Java. After installing Java for OS X 2012-006, /usr/bin/java will find the newest JDK installed, and will use that for all of the Java related command line tools in /usr/bin. You may need to modify those applications to find Java 6, or contact the developer for a newer version of the application. Also, this update removes Apple provided Java Preferences app. For more information on how to determine the default version of Java on your system, see Determining the Installed Version of the JRE in the JRE 7 Installation for Mac OS X page.

  Read the article

< Previous Page | 538 539 540 541 542 543 544 545 546 547 548 549  | Next Page >