Search Results

Search found 17782 results on 712 pages for 'questions and answers'.

Page 543/712 | < Previous Page | 539 540 541 542 543 544 545 546 547 548 549 550  | Next Page >

• Ierrs on Network Interface - Pfsense/Freebsd

  - by JFA

  Hello all, We're using PfSense as an internal router/firewall (no connection to WAN). Using the Web-GUI, under Status --- Interfaces, there's one particular interface where I have some errors: In/out errors 3513/0 I then SSHed to the firewall to validate the info provided by the WebGUI and here's the output: # netstat -ni -I bce2 Name Mtu Network Address Ipkts Ierrs Opkt Oerrs Coll bce2 1500 <Link#3> 00:23:7d:cd:a2:a2 1404522323 3513 749797131 0 0 bce2 1500 10.42.1.0/24 10.42.1.24 6 - 6 - - As you can see, both present the same info (errors on incoming packets). I switched cables, changed network card, changed port on switch and I still see the errors. My 2 questions really are: 1) Is there any way I could get more info on the nature of these errors? or is this all I can get? 2) Should I be worried about this? As you can see, the errors are a VERY LOW percentage of all the total incoming packets. In other words, is this normal on a high-traffic gigabit interface? Thanks! JFA

  Read the article

• Lenovo Mini Wireless Keyboard N5901: Remap orange "My Computer" button

  - by Jon Schneider

  I have a Lenovo Mini Wireless Keyboard N5901 (a.k.a. Part No. 57Y6336) that I'm using with an HTPC running Windows 7. The remote comes with an orange button in the top-left corner that by default, when pressed, opens the Windows "My Computer" window. I would like to remap / reprogram this button to act like the green "Windows Media Center" button instead on a Windows Media Center (WMC) remote; that is, open Windows Media Center if it isn't already open, or go to the WMC homepage if WMC is already open. I've tried several keyboard-remapping utilities (as recommended in other, more general "how to remap keyboard key?" SuperUser.com questions) including SharpKeys, Key Mapper, and KeyTweak, with no luck so far. None of these utilities recognize the orange button -- they all do recognize that some key was pressed, but display a value for the key of "unsupported" or something similar. I was able to use a utility called Keyboard Scan Code Generator to determine that a press of the orange button has a KeyData value of 16777217 (0x1000001), and a "Virtual Code" value of 182. (The other "media" buttons on the N5901 have the same KeyData value, but different Virtual Code values). I'm not sure at this point where in Windows this keystroke is being interpreted as a command to open "My Computer." There is no special software / driver for this device; it worked out of the box with Windows 7, no special driver install necessary. Is there any way to accomplish this? Thanks in advance for any suggestions!

  Read the article

• Windows 2000 uninstall on a dual-boot 2000/XP system

  - by Viktor

  While several questions have already been answered about removing an OS from a dual-booting machine, most refer to Windows 7 vs. Linux/Vista/XP. I have W2K installed on my older HDD (Drive C). Later on I bought a new HDD and installed XP's under W2K environment. Each time I turned my PC on, I had the choice of W2K or XP OS, which I still have. I eventually stopped using the w2k OS and as the older HDD where this OS is installed is getting old, I plan to remove it completely. The problem is that the active master boot record is on this very HDD. So when I remove the HDD, I get no OS loader, no matter what boot drive I choose in BIOS. Apparently I have to set the boot record on the newer HDD with XP's. Some advise to use the bootable XP CD and try to set the active MBR from there.. I don't have the CD anymore. Regardless, I suspect there is much less to solving this problem than running the recovery console, like a simple boot.ini file edit. But I might be wrong.

  Read the article

• Dealing with HTTP w00tw00t attacks

  - by Saif Bechan

  I have a server with apache and I recently installed mod_security2 because I get attacked a lot by this: My apache version is apache v2.2.3 and I use mod_security2.c This were the entries from the error log: [Wed Mar 24 02:35:41 2010] [error] [client 88.191.109.38] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Mar 24 02:47:31 2010] [error] [client 202.75.211.90] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Mar 24 02:47:49 2010] [error] [client 95.228.153.177] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Mar 24 02:48:03 2010] [error] [client 88.191.109.38] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) Here are the errors from the access_log: 202.75.211.90 - - [29/Mar/2010:10:43:15 +0200] "GET /w00tw00t.at.ISC.SANS.DFind:) HTTP/1.1" 400 392 "-" "-" 211.155.228.169 - - [29/Mar/2010:11:40:41 +0200] "GET /w00tw00t.at.ISC.SANS.DFind:) HTTP/1.1" 400 392 "-" "-" 211.155.228.169 - - [29/Mar/2010:12:37:19 +0200] "GET /w00tw00t.at.ISC.SANS.DFind:) HTTP/1.1" 400 392 "-" "-" I tried configuring mod_security2 like this: SecFilterSelective REQUEST_URI "w00tw00t\.at\.ISC\.SANS\.DFind" SecFilterSelective REQUEST_URI "\w00tw00t\.at\.ISC\.SANS" SecFilterSelective REQUEST_URI "w00tw00t\.at\.ISC\.SANS" SecFilterSelective REQUEST_URI "w00tw00t\.at\.ISC\.SANS\.DFind:" SecFilterSelective REQUEST_URI "w00tw00t\.at\.ISC\.SANS\.DFind:\)" The thing in mod_security2 is that SecFilterSelective can not be used, it gives me errors. Instead I use a rule like this: SecRule REQUEST_URI "w00tw00t\.at\.ISC\.SANS\.DFind" SecRule REQUEST_URI "\w00tw00t\.at\.ISC\.SANS" SecRule REQUEST_URI "w00tw00t\.at\.ISC\.SANS" SecRule REQUEST_URI "w00tw00t\.at\.ISC\.SANS\.DFind:" SecRule REQUEST_URI "w00tw00t\.at\.ISC\.SANS\.DFind:\)" Even this does not work. I don't know what to do anymore. Anyone have any advice? Update 1 I see that nobody can solve this problem using mod_security. So far using ip-tables seems like the best option to do this but I think the file will become extremely large because the ip changes serveral times a day. I came up with 2 other solutions, can someone comment on them on being good or not. The first solution that comes to my mind is excluding these attacks from my apache error logs. This will make is easier for me to spot other urgent errors as they occur and don't have to spit trough a long log. The second option is better i think, and that is blocking hosts that are not sent in the correct way. In this example the w00tw00t attack is send without hostname, so i think i can block the hosts that are not in the correct form. Update 2 After going trough the answers I came to the following conclusions. To have custom logging for apache will consume some unnecessary recourses, and if there really is a problem you probably will want to look at the full log without anything missing. It is better to just ignore the hits and concentrate on a better way of analyzing your error logs. Using filters for your logs a good approach for this. Final thoughts on the subject The attack mentioned above will not reach your machine if you at least have an up to date system so there are basically no worries. It can be hard to filter out all the bogus attacks from the real ones after a while, because both the error logs and access logs get extremely large. Preventing this from happening in any way will cost you resources and they it is a good practice not to waste your resources on unimportant stuff. The solution i use now is Linux logwatch. It sends me summaries of the logs and they are filtered and grouped. This way you can easily separate the important from the unimportant. Thank you all for the help, and I hope this post can be helpful to someone else too.

  Read the article

• directory with 980MB meta data, millions of files, how to delete it? (ext3)

  - by Alexandre

  Hello, So I'm stuck with this directory: drwxrwxrwx 2 dan users 980M 2010-12-22 18:38 sessions2 The directories contents is small - just millions of tiny little files. I want to wipe it from the filesystem but have been unable to. My first try was: find sessions2 -type f -delete and find sessions2 -type f -print0 | xargs -0 rm -f but had to stop because both caused escalating memory usage. At one point it was using 65% of the system's memory. So I thought (no doubt incorrectly), that it had to do with the fact that dir_index was enabled on the system. Perhaps find was trying to read the entire index into memory? So I did this (foolishly): tune2fs -O^dir_index /dev/xxx Alright, so that should do it. Ran the find command above again and... same thing. Crazy memory usage. I hurriedly ran tune2fs -Odir_index /dev/xxx to reenable dir_index, and ran to Server Fault! 2 questions: 1) How do I get rid of this directory on my live system? I don't care how long it takes, as long as it uses little memory and little CPU. By the way, using nice find ... I was able to reduce CPU usage, so my problem right now is only memory usage. 2) I disabled dir_index for about 20 minutes. No doubt new files were written to the filesystem in the meanwhile. I reenabled dir_index. Does that mean the system will not find the files that were written before dir_index was reenabled since their filenames will be missing from the old indexes? If so and I know these new files aren't important, can I maintain the old indexes? If not, how do I rebuild the indexes? Can it be done on a live system? Thanks!

  Read the article

• RAID-1 and regular drive removal (using RAID-1 as a backup measure)

  - by Vi

  Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again. Questions: Is it a good idea? Will write-intent bitmap be enough for this task or I need something else? Should I consider doing it at filesystem level (3b. if yes, how?). Basic requirements are: Quick resync when I re-add the external drive (provided I hasn't changed that partition). More or less consistent data on the removed drive if I remove it not during write/resync operation. If I remove the drive during resync I expect the data to be somewhat inconsistent, but expect quick resync completion when I re-add it again. E.g. I want the the remaining drive to track what is changed (there can be a lot of changes) and that sync back only those parts that need it.

  Read the article

• SQL Server 2005 Merge Replication to SQL Server CE 3.5

  - by user33067

  Hi, In my organization, we have a SQL Server 2005 database server (DBServer). Users of an application will normally be connected to DBServer, but, occasionally, would like to disconnect and continue their work on a laptop using SQL Server Compact Edition 3.5 (SQLCE). Due to this, we have been looking into using Merge Replication between the DBServer and SQLCE. From what I have read about this process, IIS must be installed on "the server"... yet, I have found no indication to whether this is talking about DBServer or SQLCE. I had assumed the documentation was referring to DBServer and proposed this to our networking staff. That idea was quickly put to rest as it is not our policy to install IIS on an internal server. This is where our SQL Server 2005 web server (WebServer) entered the picture. The idea being that IIS would be installed on WebServer and would be the conduit for DBServer and SQLCE to communicate. This sounded like a good idea at first, until I started looking for documentation on this type of setup. Everything I have been able deals with a DBServer -- SQLCE -- DBServer setup... nothing on DBServer -- WebServer -- SQLCE -- WebServer -- DBServer. Questions: Is going with a 3 server setup ideal? Does anyone have documentation on this type of setup? Does IIS even need to be running on one of the big servers, or can it just run off the laptop with SQLCE on it? (I'd really like this option ;))

  Read the article

• OSX esc key stops working (randomly)

  - by Jan Hancic

  I have a 2011 macbook Air with OS X Mountain Lion (I've upgraded from Lion). And ever since upgrading my escape key randomly stops working. And it's not that the keyboard on the laptop would be damaged as the same happens if I use apple's bluetooth keyboard. So I'm guessing it's a software issue. Also in some cases pressing ctrl+esc achieves the same thing as just esc so I'm 100% it's not a hardware problem. Does anybody have any idea what this might be all about and how to fix it? edit: the escape key stops working completely but it starts working again after I restart the computer. edit2: this usually happens after the computer wakes from sleep. So it's not like that is just stopps working in the middle of using it, but rather after I put it to sleep (or just close the lid) and then open it again. Has nobody got the same issue? Is there a better place to ask OSX related questions than SuperUser maybe?

  Read the article

• Filesystems for webserver with SATA and Solid State disk,

  - by Jorisslob

  We have just ordered a new webserver with 120 Gb solid state disk and a SATA disk. I am trying to plan ahead what sort of filesystem to use. This system will be running Linux, Apache/Tomcat to host java services. The main service is a system where people can upload reasonably large files (in the order of 100 Mb, images, image stacks and video), which people will be able to annotate and which will be sent to a database server when annotation is complete. Thus far, I plan to put most of the utility programs of the operating system om the SSD and put the large media files there. The SATA disks will hold the less volitile data like apache, tomcat and the servlets. For filesystems I have considered going for the stable EXT3 because I hear that it is best supported. The downside seems to be that it not the ideal choice for large files. That is why I am leaning towards using XFS for the SSD and EXT3 for the SATA. My questions are: 1) Does this sound like a reasonable setup? 2) What filesystems would you recommend for the SSD and for the SATA? Thanks

  Read the article

• How to make 7zip faster

  - by user34463

  I normally use winRAR over 7Zip simply because its faster and only a little less efficient with compression. I did a few tests on different filetypes and sizes comparing the 7zip and winRAR default settings on their normal compression and their best compression, and in a lot of cases winRAR was 50% faster and in some it was actually 100% faster. But, I do like FOSS more. So here are my questions: Is there a way to make 7zip speed up? I'd like it to at least be on par with rar's speed Is there a way to make recovery segments in 7zip like you can in rar? I didn't see any, but I guess it could be a command line thing. I tested winrar and 7zip using the latest stable version of each (4.something with 7zip). Is the 9.x beta release noticeably faster at compression? I'm talking about faster at a comparable setting in WinRAR, not just lowering to bare minimum compression. If it matters, I use a quad core intel i7 720 (1.6ghz)/(2.8ghz) with 4gb DDR3 ram, and the 64-bit version of 7zip.

  Read the article

• ADSIEdit Cleanup After Exchange 2003 Crash During Transition To Exchange 2010

  - by ThaKidd

  Hello all. I would value some input from a few Exchange 2010 experts. I have almost completed the transition from Exchange 2003 Standard to Exchange 2010 Standard. Everything went smoothly until I tried to uninstall Exchange 2003. At that point the server bit the dust and died completely. I now have NO access to the old Exchange System Management MMC as I am running Windows 2008 SR2 and Windows 7 only. I can only fix this with ADSIEdit, EMShell, and EMConsole. I have used the 2010 shell to move/remove/verify that all mailboxes, public folders and OAB are hosted on Exchange 2010. I also verified that the routing connector has been deleted. The only two things that were not done was to remove the Recipient Update Service and actually perform the removal of the 2003 software. I have spent a lot of time going through ASDIedit and have located the old Administrative Group and the Exchange 2003 server listed under it. I also located the Recipient Update Service which includes two entries; Enterprise and my domain name. I have read that it is an unwise idea to remove the old administrative group so I won't bother messing with that. I am repeatedly getting three warnings in the Application Log. Both are from MSExchangeTransport EventID 5006 (Cannot find route to Mailbox Server OLDSERVER) and 5020 (The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003) So my questions are: To clean out AD of the old Exchange 2003 info, can I delete the server name folder (Configuration - Services - Microsoft Exchange - ExchOrg - Administrative Groups - First Administrative Group - Servers - Old Server) and also delete the Update Recipient Service (Enterprise) and Update Recipient Service (DOMAIN) containers safely? Are there any additional items I need to address to ensure the AD is clean? Thanks in advance for your help!

  Read the article

• What free space thresholds/limits are advisable for 640 GB and 2 TB hard disk drives with ZEVO ZFS on OS X?

  - by Graham Perrin

  Assuming that free space advice for ZEVO will not differ from advice for other modern implementations of ZFS … Question Please, what percentages or amounts of free space are advisable for hard disk drives of the following sizes? 640 GB 2 TB Thoughts A standard answer for modern implementations of ZFS might be "no more than 96 percent full". However if apply that to (say) a single-disk 640 GB dataset where some of the files most commonly used (by VirtualBox) are larger than 15 GB each, then I guess that blocks for those files will become sub optimally spread across the platters with around 26 GB free. I read that in most cases, fragmentation and defragmentation should not be a concern with ZFS. Sill, I like the mental picture of most fragments of a large .vdi in reasonably close proximity to each other. (Do features of ZFS make that wish for proximity too old-fashioned?) Side note: there might arise the question of how to optimise performance after a threshold is 'broken'. If it arises, I'll keep it separate. Background On a 640 GB StoreJet Transcend (product ID 0x2329) in the past I probably went beyond an advisable threshold. Currently the largest file is around 17 GB –  – and I doubt that any .vdi or other file on this disk will grow beyond 40 GB. (Ignore the purple masses, those are bundles of 8 MB band files.) Without HFS Plus: the thresholds of twenty, ten and five percent that I associate with Mobile Time Machine file system need not apply. I currently use ZEVO Community Edition 1.1.1 with Mountain Lion, OS X 10.8.2, but I'd like answers to be not too version-specific. References, chronological order ZFS Block Allocation (Jeff Bonwick's Blog) (2006-11-04) Space Maps (Jeff Bonwick's Blog) (2007-09-13) Doubling Exchange Performance (Bizarre ! Vous avez dit Bizarre ?) (2010-03-11) … So to solve this problem, what went in 2010/Q1 software release is multifold. The most important thing is: we increased the threshold at which we switched from 'first fit' (go fast) to 'best fit' (pack tight) from 70% full to 96% full. With TB drives, each slab is at least 5GB and 4% is still 200MB plenty of space and no need to do anything radical before that. This gave us the biggest bang. Second, instead of trying to reuse the same primary slabs until it failed an allocation we decided to stop giving the primary slab this preferential threatment as soon as the biggest allocation that could be satisfied by a slab was down to 128K (metaslab_df_alloc_threshold). At that point we were ready to switch to another slab that had more free space. We also decided to reduce the SMO bonus. Before, a slab that was 50% empty was preferred over slabs that had never been used. In order to foster more write aggregation, we reduced the threshold to 33% empty. This means that a random write workload now spread to more slabs where each one will have larger amount of free space leading to more write aggregation. Finally we also saw that slab loading was contributing to lower performance and implemented a slab prefetch mechanism to reduce down time associated with that operation. The conjunction of all these changes lead to 50% improved OLTP and 70% reduced variability from run to run … OLTP Improvements in Sun Storage 7000 2010.Q1 (Performance Profiles) (2010-03-11) Alasdair on Everything » ZFS runs really slowly when free disk usage goes above 80% (2010-07-18) where commentary includes: … OpenSolaris has changed this in onnv revision 11146 … [CFT] Improved ZFS metaslab code (faster write speed) (2010-08-22)

  Read the article

• Launching firefox on remote server causes local firefox to start instead

  - by terdon

  Right, this is strange. I am connecting from my laptop (LMDE) to a remote host (SUSE linux enterprise) using ssh -X. I want to launch a firefox instance running on the remote server so I can have access to webpages on a private network. User@RemoteMachine $ which -a firefox /usr/bin/firefox User@RemoteMachine $ /usr/bin/firefox --version Mozilla Firefox 2.0.0.2, Copyright (c) 1998 - 2007 mozilla.org User@LocalMachine $ which -a firefox /usr/bin/firefox User@LocalMachine $ /usr/bin/firefox --version Mozilla Firefox 14.0.1 Now, if firefox is not running on the local machine, everything goes as expected and executing firefox on the remote machine causes a firefox (v 2.0) window running on the remote machine to show up. However, if firefox is running on the local machine a second window of firefox 14.0.1 running on the local machine appears. I have checked top in both machines. In the 2nd case, a firefox process briefely appears on the remote machine and then disappears when the local version of firefox is launched. My questions are the following: What gives? How/why can firefox connect to its existing instance on the local machine? The remote machine appears to have access to the local machine. It, in fact, appears to have the right to execute programs on my local machine. Am I missing something or is this just weird? Is this not a security risk?

  Read the article

• Why is my Current Printer unavailable in Office ?

  - by cros

  Whenever I try to print any document from Microsoft Office 2007 in Windows Vista 64-bit there is a great possibility that the print job will fail with the following error message: Current printer is unavailable. Select another printer. Only problem is no printer works, not even Bullzip PDF Printer. The only way to resolve this that I have found so far is a reboot, but I don't want to do that all the time. I am using Windows Vista 64-bit. I've had the problem using both SP1 and SP2. The problem occurs on both locally installed and network printers, as well as the virtual printer Bullzip PDF Printer. My primary source of the problem has been Excel, but the error has also occurred in Word. Changing the default printer and restarting the Microsoft Office-application solves this temporarily, but not permanently. Google:ing the error message returns a lot of questions but no solutions, so seems like a frequent problem. What could be a permanent solution for this problem? UPDATE: It seems that my problem stems from me opening MS Office applications by opening a document from Total Commander with administrative rights. This somehow makes the applications not find the printers. Opening MS Office applications either from the Start menu or by opening a document in a non-administrator Explorer allows me to print.

  Read the article

• How can I trigger the creation of a new CLB file?

  - by Xperimental

  I'm currently having a problem with an application using COM running on Windows Vista. The application runs ok on one machine, but doesn't work on a similar configured machine. Both machines are virtual images originating from the same source image. While searching the registry for causes of this error, I came across the CLBVersion key in HKCR\CLSID which seems to have something to do with COM. The value of the key differs between the two machines (0x6 on the erroneous one, 0xc on the working one). Also there are files containing the same number in their filenames in the %SystemRoot\Registration directories of the machines. They are called R000000000006.clb and R00000000000c.clb respectively. I have already searched the windows event log for anything leading to the creation of those files (I have searched by the creation date of the files). Now a few questions regarding the registry keys and the files: Is it correct, that this is connected to COM? What is the function of the files? What causes the creation of a new "CLBVersion"? Is there a way for me to trigger the creation of a new CLB file? edit: I have now found out, that this has nothing to do with my application error. But I would still be interested in details about the registry key and the files. An installation of Visual Studio 2005 has brought the second machine to the same configuration (0xc in registry and file) as the other one.

  Read the article

• Why am I getting 403 Forbidden after enabling HTTPS for Apache on Mac OS X?

  - by Daryl Spitzer

  I enabled HTTPS on the Apache server built-in to Mac OS X 10.6 (on my MacBook Pro) by uncommenting: Include /private/etc/apache2/extra/httpd-ssl.conf ...in /etc/apache2/httpd.conf and modifying /etc/apache2/extra/httpd-ssl.conf to include: DocumentRoot "/Users/dspitzer/foo/bar" ServerName dot.com:443 ServerAdmin [email protected] ... SSLCertificateFile "/private/etc/apache2/siab_cert.pem" SSLCertificateKeyFile "/private/etc/apache2/siab_key.pem" Then I restart apache (with sudo apachectl restart) and go to https://localhost/ in Safari, where I get: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>403 Forbidden</title> </head><body> <h1>Forbidden</h1> <p>You don't have permission to access / on this server.</p> </body></html> I've tried changing 443 in /etc/apache2/extra/httpd-ssl.conf to 8443 and going to https://localhost:8443/ and I get the same error. I read http://serverfault.com/questions/88037/why-am-i-getting-this-403-forbidden-error and confirmed that execute permission is given for all parent directories of the vhost dir: /Users/dspitzer/foo/bar. Is there a log file somewhere that might give me a clue?

  Read the article

• PHP upgrade to 5.3 from 5.2, sessions no longer get stored

  - by Damo

  background link: http://stackoverflow.com/questions/7014945/php-upgrade-5-2-to-5-3-session-issue I have upgraded PHP on my 2008 std server from PHP 5.2 to PHP 5.3. Following the upgrade, sessions no longer work correctly. I have copied over the settings from my PHP.ini files which are applicable and configure new settings in line with the server or PHP's recommendations. PHP executes fine correctly, however session data does not get saved. I have session data stored in c:\temp. For each session created, I can see the session file in this folder. However no information gets written into the session file. Permissions wise, IUSR and EVERYONE has write access to this folder. If I downgrade to PHP 5.2, sessions are saved correctly and the site functions correctly. I have followed advise to ensure my code is optimised. closing session files correctly and forcing a session reset. I'm stumped. session Session Support enabled Registered save handlers files user sqlite Registered serializer handlers php php_binary wddx DirectiveLocal ValueMaster Value session.auto_startOffOff session.bug_compat_42OnOn session.bug_compat_warnOnOn session.cache_expire180180 session.cache_limiternocachenocache session.cookie_domainno valueno value session.cookie_httponlyOffOff session.cookie_lifetime00 session.cookie_path// session.cookie_secureOffOff session.entropy_fileno valueno value session.entropy_length00 session.gc_divisor100100 session.gc_maxlifetime14401440 session.gc_probability11 session.hash_bits_per_character44 session.hash_function00 session.namePHPSESSID53PHPSESSID53 session.referer_checkno valueno value session.save_handlerfilesfiles session.save_path/temp/temp session.serialize_handlerphpphp session.use_cookiesOnOn session.use_only_cookiesOnOn session.use_trans_sid00

  Read the article

• Simple P2V help from Linux to Windows

  - by Ke.

  I have two OS's installed on different drives in my PC. One linux (Centos 5.4) and one windows 7. Its getting tiresome to constantly have to stop and restart the PC when I want to use either OS. I would very much like to use Windows 7 as my host OS and access my linux OS from within Windows. However, im having trouble deciphering exactly how to do this (many of the articles seem confusing and a bit overkill) From what i have seen its possible to use VMWare converter to convert the physical linux image to a virtual image so that I can use it in windows. As im having problems understanding how this is done, I would really appreciate a step by step guide (for a newbie), or any simple tutorials that you can point me at. Some questions beforehand: 1) My linux image is around 80gb, do i need to take this into consideration? The linux drive is around 180gb in total. All my other drives are NTFS non writeable in linux (as I use them in windows and ntfs is dodgy in linux), so probably not possible to move the image over to my ntfs drives 2) Can I just zip the linux files up somehow and transfer it to windows to create the p2v? 3) Is it possible to do the P2V conversion while I am logged into windows. I can see the actual linux drive loaded in disk manager, but windows doesnt read linux file systems so im confused as to how to access the linux drive if this is possible. 4) Or will i need to do the whole p2v conversion inside linux? Cheers, any help is much appreciated Ke (a confused p2v newbie)

  Read the article

• Problems migrating software RAID 5 to new server (linux)

  - by leleu

  I have a CentOS setup with sw RAID5 that holds my data. Well, the server died, so I bought another box to migrate my drives to. Only thing is, I cannot get the RAID array rebuilt (not even sure it needs rebuilding, might just need the /dev/md0 mapping created... but I don't even know how to determine what I need!) Some details: RAID5 software (used mdadm) 4x 250GB drives (2 are SATA, 2 are EIDE -- would this matter? It worked fine in the other box...) latest CentOS distro built using mdadm I've got a decent amount of experience with standard linux stuff, but the hardware level stuff runs me in circles. I've spent some time googling and elsewhere here on SF, so please be kind for my newbie questions :). My question is this: how can I diagnose the problem? For all I know, I'm using the wrong device blocks when I try to rebuild the array, but I can't find the command to display only the devices that have some physical attachment. Is there some simple way for me to run mdadm, having it scan over all my physical drives, and say "hey, drives 2,5,6,7 are a software array, want me to mount it?" I basically just took the drives from my old box and put it into my new one. They show up in the BIOS. What steps do I need to take in order to get the array up, running, and mounted? Thanks in advance!

  Read the article

• ASDIEdit Cleanup After Exchange 2003 Crash During Transition To Exchange 2010

  - by ThaKidd

  Hello all. I would value some input from a few experts. I have almost completed the transition from Exchange 2003 Standard to Exchange 2010 Standard. Everything went smoothly until I tried to uninstall Exchange 2003. At that point the server bit the dust and died completely. I now have NO access to the old Exchange System Management MMC as I am running Windows 2008 SR2 and Windows 7 only. I can only fix this with ASDIEdit, EMShell, and EMConsole. I have used the 2010 shell to move/remove/verify that all mailboxes, public folders and OAB are hosted on Exchange 2010. I also verified that the routing connector has been deleted. The only two things that were not done was to remove the Recipient Update Service and actually perform the removal of the 2003 software. I have spent a lot of time going through ASDIedit and have located the old Administrative Group and the Exchange 2003 server listed under it. I also located the Recipient Update Service which includes two entries; Enterprise and my domain name. I have read that it is an unwise idea to remove the old administrative group so I won't bother messing with that. I am repeatedly getting three warnings in the Application Log. Both are from MSExchangeTransport EventID 5006 (Cannot find route to Mailbox Server OLDSERVER) and 5020 (The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003) So my questions are: To clean out AD of the old Exchange 2003 info, can I delete the server name folder (Configuration - Services - Microsoft Exchange - ExchOrg - Administrative Groups - First Administrative Group - Servers - Old Server) and also delete the Update Recipient Service (Enterprise) and Update Recipient Service (DOMAIN) containers safely? Are there any additional items I need to address to ensure the AD is clean? Thanks in advance for your help!

  Read the article

• cPanel web servers mounting home partition to a NAS or SAN

  - by Scott

  Hello, I currently have 2 cPanel web servers that are little 1RU dual cpu quad core xeons. They have a lot of resources for processing and handling web requests, and never exceed more than 10% cpu usage. They also have plenty of RAM. The problem is though that they both have RAID 1 160Gb SAS hard disk drives in them that are 75% full, and growing by the day. I didnt think that the amount of disk usage would be so high, but due to the nature of the sites hosted, this has become an issue. The easy fix would be just to upgrade the hard drives to something bigger (probably not of the SAS variety), but I am thinking of keeping the current machines as "processing servers" and buying a central "storage server" with about 12TB of storage. The /home/ partition on each of the 1RU servers would be mounted to a NAS or SAN point on this central storage server. My questions are: - Has anyone got a cPanel setup where they mount /home/ to a NAS or SAN elsewhere? If so, can you provide details as to what you did and how it went :) - Any recommendations on networking? Is gigabit ethernet enough? Is TCP/IP going to be a noticable performance problem? Anyone used a TOE key? - Anyone benchmarked or had any performance issues with SAN over NAS? Any help greatly appreciated. Scott

  Read the article

• Recovery of Windows DFS partion with shadow copy versioned files when overwritten with older modifie

  - by patjbs

  I've noticed the following "bug" on a DFS volume with shadow copies: Pretend you have the following folders/files under shadow copy versioning, going back two weeks. MyDirectory+ MyFile - Modified Date 8/1/2009 The current date: 8/30/2009 You have another version of MyFile stored elsewhere, with a modified date of 7/1/2009. Copy your other version of MyFile into MyDirectory, overwriting the newest version. I expected that you could roll back to the version that was there when it last imaged, say on the prior day and recover your 8/1 version. Not the case. Now, when you go to look at previous versions for the past two weeks, the versioning of that file will be entirely lost, and you'll be stuck with your older 7/1 version. Suckage. Questions: (1) Is this intentional, and if so, what's the rationale? I assume that DFS picks up on the versioning based on the current file, and that's what's wiping out prior versions, but it seems like a fairly stupid/naive way of handling versioning to me. (2) Is there a way to backtrack out of this, without resorting to restoration from other backup mediums? Thanks!

  Read the article

• Understanding Linux SCSI queue depths

  - by Troels Arvin

  I'm experimenting with the effects of different SCSI queue depth values on a Dell server running CentOS Linux 5.4 (x86_64). The server has two QLogic QLE2560 FC HBAs connected via multipathing to a storage system. The storage system has allocated two LUNs to the server, each connected through four paths in an active-active-active-active round-robin configuration. All in all, the two LUNs exist as eight /dev/sdX devices, represented by two devices in /dev/mpath. I currently adjust the queue depth values in /etc/modprobe.conf and check the result (after rebooting) by looking in the seventh column of /proc/scsi/sg/devices. Two questions related to that: Is there a way to adjust queue depths without rebooting or unloading the qla2xxx kernel module? E.g., can I echo a new queue depth value into some /proc or /sys-like file to update the queue depth? If I set the queue depth to 128, is that 128 in total for all devices handled by the qla2xxx module?, or 128 for each HBA? (256 in total), or 128 for each of the eight /dev/sdX devices (1024 in toal)?, or 128 for each of the two /dev/mpath/... devices (256 in total)? This is important for me to know so that my server doesn't flood the storage system, affecting other servers connected to it.

  Read the article

• Any Recommendations for a Web Based Large File Transfer System?

  - by Glen Richards

  I'm looking for a server software product that: Allows my users to share large files with: The general public securely to 1 or more people (notification via email, optionally with a token that gives them x period of time to download) Allows anyone in the general public to share files with my users. Perhaps by invitation. Has to be user friendly enough to allow my users to use this with out having to bug me as the admin. It needs to be a system that we can install on our own server (we don't want shared data sitting on anyone else's server) A web based solution. Using some kind or secure comms channel would be good too, eg, ssh Files to share could be over 1 GB. I found the question below. WebDav does not sound user friendly enough: http://serverfault.com/questions/86878/recommendations-for-a-secure-and-simple-dropbox-system I've done a lot of searching, but I can't get the search terms right. There are too many services that provide this, but I want something we can install on our own server. A last resort would be to roll my own. Any ideas appreciated. Glen EDIT Sorry Tom and Jeff but Glen specifically says that he's looking for a 'product' so given that I specialise in this field thought that my expertise in this area may have been of use to him. I don't see how him writing services is going to be easy for him to maintain going forward (large IT admin overhead) or simple for his users and the general public to work with.

  Read the article

• How to boot Linux from a 16gb USB flash drive

  - by Chris Harris

  I'm trying to install Linux on a single partition of a USB flash drive that's larger than 4gb. The first place I went to is http://pendrivelinux.com. I can follow these instructions for installing Xubuntu 9.04 perfectly, which unfortunately break down when I try to scale it up beyond 4gb. There are several other tools to do this (unetbootin and usb-creator) which follow a very similar formula. I figured out that a big problem of mine was that all of these tools assume the USB drive is formatted in FAT32, which unfortunately cannot hold a single file larger than 4gb. This is unfortunate because I want to use just one partition, so that my persistance file, casper-rw, looks like one big partition to the OS once I've booted off of the USB drive. I then tried following a myriad of instructions involving formatting the drive as one large ext2 filesystem and using extlinux to create a single bootable ext2 file system. This doesn't work for me however, after about 20 attempts verifying and slightly tweaking the formula, I cannot seem to get a "good" bootable ext2 file system built. I'm not entirely sure what's going on, but it seems as though no matter how hard I try, I cannot get the ext2 file system to remain coherent after copying the Linux ISO contents over, copying the MBR, and executing extlinux to create the ext bootloader. Every time, after I follow these steps (in any order) and reboot, I get an unbootable USB drive. If I then mount the drive under Linux again, I see a mess of a file system (inodes have clearly been screwed up somewhere along the way). I suspected that the USB drive wasn't being fully flushed, so I tried using the "sync" and "unmount" commands before rebooting which didn't affect things at all. I guess I have several possible questions - but let's start with the obvious - is there something I'm missing to create a bootable ext2 USB flash drive that's large (e.g. 16gb)?

  Read the article

< Previous Page | 539 540 541 542 543 544 545 546 547 548 549 550  | Next Page >