Search Results

Search found 26555 results on 1063 pages for 'active directory explorer'.

Page 544/1063 | < Previous Page | 540 541 542 543 544 545 546 547 548 549 550 551  | Next Page >

• No device file for partition on logical volume (Linux LVM)

  - by Brian

  I created a logical volume (scandata) containing a single ext3 partition. It is the only logical volume in its volume group (case4t). Said volume group is comprised by 3 physical volumes, which are three primary partitions on a single block device (/dev/sdb). When I created it, I could mount the partition via the block device /dev/mapper/case4t-scandatap1. Since last reboot the aforementioned block device file has disappeared. It may be of note -- I'm not sure -- that my superior (a college professor) had prompted this reboot by running sudo chmod -R [his name] /usr/bin, which obliterated all suid in its path, preventing the both of us from sudo-ing. That issue has been (temporarily) rectified via this operation. Now I'll cut the chatter and get started with the terminal dumps: $ sudo pvs; sudo vgs; sudo lvs Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Scanning for physical volume names PV VG Fmt Attr PSize PFree /dev/sdb1 case4t lvm2 a- 819.32G 0 /dev/sdb2 case4t lvm2 a- 866.40G 0 /dev/sdb3 case4t lvm2 a- 47.09G 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" VG #PV #LV #SN Attr VSize VFree case4t 3 1 0 wz--n- 1.69T 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all logical volumes LV VG Attr LSize Origin Snap% Move Log Copy% Convert scandata case4t -wi-a- 1.69T Wiping internal VG cache $ sudo vgchange -a y Logging initialised at Sat Jan 8 11:43:14 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" 1 logical volume(s) in volume group "case4t" already active 1 existing logical volume(s) in volume group "case4t" monitored Found volume group "case4t" Activated logical volumes in volume group "case4t" 1 logical volume(s) in volume group "case4t" now active Wiping internal VG cache $ ls /dev | grep case4t case4t $ ls /dev/mapper case4t-scandata control $ sudo fdisk -l /dev/case4t/scandata Disk /dev/case4t/scandata: 1860.5 GB, 1860584865792 bytes 255 heads, 63 sectors/track, 226203 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00049bf5 Device Boot Start End Blocks Id System /dev/case4t/scandata1 1 226203 1816975566 83 Linux $ sudo parted /dev/case4t/scandata print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/case4t-scandata: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 1861GB 1861GB primary ext3 $ sudo fdisk -l /dev/sdb Disk /dev/sdb: 1860.5 GB, 1860593254400 bytes 255 heads, 63 sectors/track, 226204 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000081 Device Boot Start End Blocks Id System /dev/sdb1 1 106955 859116006 83 Linux /dev/sdb2 113103 226204 908491815 83 Linux /dev/sdb3 106956 113102 49375777+ 83 Linux Partition table entries are not in disk order $ sudo parted /dev/sdb print Model: DELL PERC 6/i (scsi) Disk /dev/sdb: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 880GB 880GB primary reiserfs 3 880GB 930GB 50.6GB primary 2 930GB 1861GB 930GB primary I find it a bit strange that partition one above is said to be reiserfs, or if it matters -- it was previously reiserfs, but LVM recognizes it as a PV. To reiterate, neither /dev/mapper/case4t-scandatap1 (which I had used previously) nor /dev/case4t/scandata1 (as printed by fdisk) exists. And /dev/case4t/scandata (no partition number) cannot be mounted: $sudo mount -t ext3 /dev/case4t/scandata /mnt/new mount: wrong fs type, bad option, bad superblock on /dev/mapper/case4t-scandata, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so All I get on syslog is: [170059.538137] VFS: Can't find ext3 filesystem on dev dm-0. Thanks in advance for any help you can offer, Brian P.S. I am on Ubuntu GNU/Linux 2.6.28-11-server (Jaunty) (out of date, I know -- that's on the laundry list).

  Read the article

• OpenSSL response 404 issue on centOS 6

  - by dsp_099

  I followed this tutorial (though it's for 5.2, I figured I'd be alright). The changes I had to make that seemed to have worked: Rename ca.csr to ca.cslr (that's the one the command generated) List it in the ssl.conf as ca.cslr instead of ca.csr I have the following in the httpd.conf <VirtualHost *:80> DocumentRoot /etc/test ServerName site.com </VirtualHost> <VirtualHost *:433> SSLEngine on SSLCertificateFile /etc/pki/tls/certs/ca.crt SSLCertificateKeyFile /etc/pki/tls/private/ca.key <Directory /etc/test> AllowOverride All </Directory> DocumentRoot /etc/test ServerName cryptokings.com </VirtualHost> /test contains a folder inside of it, accessible via http://site.com/test/foo, however attempting to access it via https://site.com/test/foo results in warning that the certificate is untrusted (self-signed, no biggie) a 404 error. Chrome's complains about the certificate are the following: The identity of this website has not been verified. • Server's certificate does not match the URL. • Server's certificate is not trusted. I think those warnings are a side-effect of a self-signed certificate - or is the first one something that needs to be addressed? I seem to be able fetch the root page via https just fine though, it shows a standard CentOS setup page. (That said, I haven't added a VirtualHost entry for it so I suppose that makes sense) I think I've made a mistake somewhere during the setup as I'm not too familiar with the process. During setup, I was prompted for a type of password that would be required when apache restarts but running service httpd restart does not seem to prompt me for one. Any help would be appreciated.

  Read the article

• Error with procmail script to use Maildir format

  - by bradlis7

  I have this code in /etc/procmailrc: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code to the sending user as well. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user. Sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Do I need a space between the two blocks? Thanks for the help.

  Read the article

• Canonical Redirect on Dynamic Mass Virtual Hosts on Apache

  - by Josh

  I have a Web app on Apache that allows users to point their domain to the server. Right now I'm using Apache's dynamic mass virtual hosts with an entry VirtualDocumentRoot /www/hosts/%0/docs So with www.companydomain.com it points to /www/hosts/www.companydomain.com/docs The problem is when the user goes to companydomain.com it will point to /www/hosts/companydomain.com/docs Is there an easy way to automatically have Apache check to see if a directory exists for the virtual host, and if not, look for the host name with "www." in front of it? Other subdomains are fine (i.e. abc.domain.com should point to a diff. directory than def.domain.com) but the whole "www" issue is a mystery to me. I am using dynamic mass virtual hosts so the server does not have to restart after each registration for the application. If there is a different way that is fine as long as apache isn't restarted each time. How can I accomplish this? Worst case scenario if there were a way to redirect to a "default" location on the server if not found I could always do a check via PHP or something but I feel like that is a bit hacked together and there has to be a more efficient way. Thanks in advance!

  Read the article

• Filtering bad requests from Apache -> logger -> rsyslog to syslog-ng on a remote logging server possible?

  - by zeyus

  EDIT: Thanks for the help Here is a quick idea of the setup: webserver X In apache httpd.conf: LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vcombined CustomLog "|/usr/bin/logger -p local6.info -t access " vcombined In rsyslog.conf: *.* @logserver Logserver syslog-ng.conf: ... parser p_apache {csv-parser(columns( "APACHE.VIRTUAL_HOST", "APACHE.CLIENT_IP", "APACHE.IDENT_NAME", "APACHE.USER_NAME", "APACHE.TIMESTAMP", "APACHE.REQUEST_URL", "APACHE.REQUEST_STATUS", "APACHE.CONTENT_LENGTH", "APACHE.REFERER", "APACHE.USER_AGENT", "APACHE.PROCESS_TIME", "APACHE.SERVER_NAME") # flags: # escape-none,escape-backslash,escape-double-char, # strip-whitespace flags(escape-double-char,strip-whitespace) delimiters(" ") quote-pairs('""[]') );}; ... source s_net { udp(ip(0.0.0.0) port(514) so_rcvbuf(1048576)); }; destination hosts_acc { file("/var/log/hosts/$HOST/${APACHE.VIRTUAL_HOST}_acc.log"); }; filter f_apacheacc { facility(local6); }; log { source(s_net); parser(p_apache); filter(f_apacheacc); destination(hosts_acc); }; ... The log's get there just fine, but there are a LOT of logs like the following: -rw------- 1 root root 5726 Apr 6 01:02 xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 23435 Apr 6 01:06 \xc3\x9ed$yA;_acc.log -rw------- 1 root root 745 Apr 6 00:57 xc3\x9ed$yA;_acc.log -rw------- 1 root root 8440 Apr 5 22:50 \xc3\xaf_F\xc3\x95$yA;_acc.log -rw------- 1 root root 3112 Apr 6 00:58 xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 4220 Apr 5 22:03 xe2\x80\x98\twd\xc2\xa2\xc2\xb0\xc3\x96$yA;_acc.log -rw------- 1 root root 1055 Apr 5 22:03 xe2\x80\x98\xc2\x9dw\xc3\x94\xc3\xb4T\xc5\x93$yA;_acc.log -rw------- 1 root root 1821 Apr 6 00:58 \xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 2875 Apr 6 01:02 xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 3165 Apr 5 22:48 \xe2\x80\x99-w\xc3\xaf_F\xc3\x95$yA;_acc.log -rw------- 1 root root 3165 Apr 5 22:40 \xe2\x80\x99\xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 15825 Apr 5 22:50 xe2\x80\x99\xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 1055 Apr 5 22:39 \xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 2110 Apr 5 22:50 xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 2034 Apr 5 22:50 \xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 4066 Apr 5 22:45 xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 7212 Apr 6 13:30 \xe2\x80\xb9>$yA;_acc.log -rw------- 1 root root 3000 Apr 6 13:25 xe2\x80\xb9>$yA;_acc.log My question is where, and how can I filter these out, I don't want them on the filesystem (But actually I guess it wouldn't be a bad idea to keep them logged, but in their correct VHost file) Here is an example VHost <VirtualHost *:80> ServerAdmin [email protected] ServerName xxx.xx DocumentRoot /var/www/vhosts/xxx <Directory /var/www/vhosts/xxx> AllowOverride All Options All RewriteEngine on </Directory> </VirtualHost> And the default "catch-all" vhost at the bottom of the vhosts config file: <VirtualHost *:80> ServerName default ServerAlias * ServerAlias catchall.xxx.xx DocumentRoot /var/www/vhosts/nodomain <Directory "/var/www/vhosts/nodomain"> Options Indexes FollowSymLinks AllowOverride none Allow from All </Directory> CustomLog /dev/null combined ErrorLog /dev/null </VirtualHost> I had posted this in a related question but It's better in it's own question. Here are some examples from inside the log files r_acc.log: Apr 7 11:16:27 xxxxx access: r PC 5.0; eSobiSubscriber 2.0.4.16; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" Apr 7 11:16:28 xxxxx access: r PC 5.0; eSobiSubscriber 2.0.4.16; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" ######################## D46-28E2-0FBC95-78798EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log: Apr 7 14:54:06 xxxxx access: D46-28E2-0FBC95-78798EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; B557000E-F20D-35DD-021A-9824EC-17A4AFV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 3BD03D7B-EEFD-83FF-7599-B751AD-6F0A2EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 9CAE0724-D455-0B31-3378-871C11-BBD0A4V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; C1E24799-3979-2452-81-3BAA0FFD361F5A; 0E701CBC-5832-5AB6-D5-CFBF9BDE863EAA; 464714B1-B3E2-774A-A4-FEA612A46CEE06; 74C817B0-D081-D2CC-6D-C4EF0F1B4F49BB; 1338B1DE-67CD-977C-B35D-1F2C4441DD6A; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C; BRI/2)" ######################## V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log: Apr 7 14:55:04 xxxxx access: V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; FEEACE4F-092A-1D46-28E2-0FBC95-78798EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; B557000E-F20D-35DD-021A-9824EC-17A4AFV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 3BD03D7B-EEFD-83FF-7599-B751AD-6F0A2EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 9CAE0724-D455-0B31-3378-871C11-BBD0A4V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; C1E24799-3979-2452-81-3BAA0FFD361F5A; 0E701CBC-5832-5AB6-D5-CFBF9BDE863EAA; 464714B1-B3E2-774A-A4-FEA612A46CEE06; 74C817B0-D081-D2CC-6D-C4EF0F1B4F49BB; 1338B1DE-67CD-977C-B35D-1F2C4441DD6A; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C; BRI/2)" ################### xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA;_acc.log: Apr 7 19:48:39 xxxxx access: xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 3C12D25C-9D40-91CF-1F40-AC-B1A083426DV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; D4713FA8-0142-A0C2-4812-BA-E03221005BV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 199BAF2A-ECD5-39FA-65C3-E8-B107FAFF08V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 384BDA70-9954-7744-05A0-C4-C7D9FEA685V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; EE7292A9-333C-AF70-5A7F-55-CAA7D0BA39V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; -AD7D48FA3A55-2A33-D10B-B4B66276D8B8; -166A9C6A2E71-24DF-A192-C8258AA4DE14; -00077C6C84E0-A302-4954-3D6D17C54D31; 3F56C318-EC3C-432B-680F-7E4BB2B852C4; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" Apr 7 19:48:39 xxxxx access: xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 3C12D25C-9D40-91CF-1F40-AC-B1A083426DV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; D4713FA8-0142-A0C2-4812-BA-E03221005BV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 199BAF2A-ECD5-39FA-65C3-E8-B107FAFF08V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 384BDA70-9954-7744-05A0-C4-C7D9FEA685V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; EE7292A9-333C-AF70-5A7F-55-CAA7D0BA39V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; -AD7D48FA3A55-2A33-D10B-B4B66276D8B8; -166A9C6A2E71-24DF-A192-C8258AA4DE14; -00077C6C84E0-A302-4954-3D6D17C54D31; 3F56C318-EC3C-432B-680F-7E4BB2B852C4; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" Thanks

  Read the article

• Sharing disk volumes across OpenVZ guests to reduce Package Management Overhead

  - by andyortlieb

  Is it feasible to create a single "master" OpenVZ guest who would only be used for package management, and use something like mount --bind on several other OpenVZ guests sort of trick them into using the environment installed by the master guest? The point of this would be so that users can maintain their own containers, and yet stay in sync with the master development environment, so they'll always have the latest & greatest requirements without worrying too much about system administration. If they need to install their own packages, could put them in /opt, or /usr/local (or set a path to their home directory)? To rephrase, I would like several (developer's, for example) OpenVZ guests whose /bin, /usr (and so on...) actually refer to the same disk location as that of a master OpenVZ guest who can be started up to install and update common packages for the environment to be shared by all of this group of OpenVZ guests. For what it's worth, we're running Debian 6. Edit: I have tried mounting (bind, and readonly) /bin, /lib, /sbin, /usr in this fashion and it refuses to start the containers stating that files are already mounted or otherwise in use: Starting container ... vzquota : (error) Quota on syscall for id 1102: Device or resource busy vzquota : (error) Possible reasons: vzquota : (error) - Container's root is already mounted vzquota : (error) - there are opened files inside Container's private area vzquota : (error) - your current working directory is inside Container's vzquota : (error) private area vzquota : (error) Currently used file(s): /var/lib/vz/private/1102/sbin /var/lib/vz/private/1102/usr /var/lib/vz/private/1102/lib /var/lib/vz/private/1102/bin vzquota on failed [3] If I unmount these four volumes, and start the guest, and then mount them after the guest has started, the guest never sees them mounted.

  Read the article

• can't figure out why apache LDAP auth fails

  - by SethG

  Suddenly, yesterday, one of my apache servers became unable to connect to my LDAP (AD) server. I have two sites running on that server, both of which use LDAP to auth against my AD server when a user logs in to either site. It had been working fine two days ago. For reasons unknown, as of yesterday, it stopped working. The error log only says this: auth_ldap authenticate: user foo authentication failed; URI /FrontPage [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server], referer: http://mysite.com/ I thought perhaps my self-signed SSL cert had expired, so I created a new one for mysite.com, but not for the server hostname itself, and the problem persisted. I enabled debug-level logging. It shows the full SSL transaction with the LDAP server, and it appears to complete without errors until the very end when I get the "Can't contact LDAP server" message. I can run ldapsearch from the commandline on this server, and I can login to it, which also uses LDAP, so I know that the server can connect to and query the LDAP/AD server. It is only apache that cannot connect. Googling for an answer has turned up nothing, so I'm asking here. Can anybody provide insight to this problem? Here's the LDAP section from the apache config: <Directory "/web/wiki/"> Order allow,deny Allow from all AuthType Basic AuthName "Login" AuthBasicProvider ldap AuthzLDAPAuthoritative off #AuthBasicAuthoritative off AuthLDAPUrl ldaps://domain.server.ip/dc=full,dc=context,dc=server,dc=name?sAMAccountName?sub AuthLDAPBindDN cn=ldapbinduser,cn=Users,dc=full,dc=context,dc=server,dc=name AuthLDAPBindPassword password require valid-user </Directory>

  Read the article

• IIS running but not serving content

  - by Kyle

  I have an internal dev server running Windows 2k8 R2 with the Web and FTP Server roles set up which won't serve any content at all. Trying to connect from another host via telnet yields 'connection failed': c:\>telnet devserver 80 Connecting To devserver...Could not open connection to the host, on port 80: Conn ect failed Using netstat -an | find "80" on the dev server returns no connections on port 80 (a few on 1801, etc) tcpview confirms this, listing no open connections on port 80. The following services related to the Web role are running: World Wide Web Publishing Service Application Host Helper Service Microsoft FTP Service (ftp connections to port 21 are granted) Windows Process Activation Service The default website bindings are: Type Host Name Port IP Address Binding Information http 80 * net.tcp 808:* net.pipe * net.msmq localhost msmq.formatname localhost When setting up a new application under the default site, the test function passes both connection/authorisation only if the 'connect as' user is local admin, otherwise the test errors with 'invalid application path'. At no point is the W3SVC service PID bound to port 80 (it is running and bound to 21 for ftp). There are no W3SVC log directory at c:\inetpub\logs\LogFiles\ (only FTPSVC2), and no HTTPERR directory at c:\windows\system32\ or c:\windows\system32\logfiles\. There do not appear to be any related errors in the event logs. I'd really appreciate any thoughts on be a good place dig into what's (not) going on here!

  Read the article

• How do I get a subdomain on Xampp Apache @ localhost?

  - by jasondavis

  **UPDATE- I got it working now, I just had to change to The port number is important here. I just modified my windows HOST file @ C:\Windows\System32\drivers\etc and added this to the end of it 127.0.0.1 images.localhost 127.0.0.1 w-w-w.friendproject-.com 127.0.0.1 friendproject.-com Then I modified my httpd-vhosts.conf file on Apache under Xampp @ C:\webserver\apache\conf\extra Under the part where it shows examples for adding virtualhost I added this code below: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /htdocs/images/ ServerName images.localhost </VirtualHost> <VirtualHost *:80> DocumentRoot /htdocs/ ServerName friendproject.com/ </VirtualHost> <VirtualHost *:80> DocumentRoot /htdocs/ ServerName w-ww-.friendproject.c-om/ </VirtualHost> Now the problem is when I go to any of the newly added domains in the browser I get this error below and even worse news is I now get this error even when going to http://localhost/ which worked fine before doing this I realize I can change everything back but I really need to at least get htt-p://im-ages.localhost to work. What do I do? Access forbidden! You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster . Error 403 localhost 07/25/09 21:20:14 Apache/2.2.11 (Win32) DAV/2 mod_ssl/2.2.11 OpenSSL/0.9.8i PHP/5.2.9

  Read the article

• How can I get WAMP and a domain name to work on a non-standard port?

  - by David Murdoch

  I have read countless articles on setting up a domain on WAMP to listen on a port other than 80; none of them are working. I've got Windows Server 2008 (Standard) with IIS 7 installed and running on port 80 (and 443). I've got WAMP installed with the following configuration. Listen 81 ServerName sub.example.com:81 DocumentRoot "C:/Path/To/www" <Directory "C:/Path/To/www"> Options All MultiViews AllowOverride All # onlineoffline tag - don't remove Order Allow,Deny Allow from all </Directory> localhost:81 works with the above configuration but sub.example.com:81 does not. Just to make sure my firewall wasn't getting in the way I have disabled it completely. My sub.example.com domain is already pointing to my server and works on IIS on port 80. Also, if I disable IIS and change the Apache port from 81 to 80 it works. Yes, I am restarting Apache after each httpd.conf change. :-) I don't need any other domain (or sub domains [I don't even care about localhost]) configured which is why I'm not using a VirtualHost. Any ideas what is going on here? What could I be doing wrong? Update Changing Listen to 80 but keeping ServerName as sub.example.com:81 causes navigation to sub.example.com:80 to work; this just doesn't seem right to me. Could ServerName be ignoring the :port part somehow? netstat -a -n | find "TCP": >netstat -a -n | find "TCP" TCP 0.0.0.0:81 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:912 0.0.0.0:0 LISTENING ... TCP 127.0.0.1:81 127.0.0.1:49709 TIME_WAIT ...

  Read the article

• MS Securily Essentials efficiency / usage, suspicious processes

  - by biggvsdiccvs

  I recently noticed that my (originally pretty fast) Windows 7 Pro laptop started getting slow and using a lot of CPU power for no apparent reason. A full scan by Microsoft Security Essentials revealed nothing. After some investigation, I found multiple instances of a strange process called urpev.exe and a couple of similar exe files sitting in subdirectories of Users//AppData/Roaming (this particular one was in a folder called Xyceowme). Description: "Mescrosift Visaal Studie 2010". Company name: "Mesrosift Corporatien". Is it a virus or something? :) Now, all of these exe files were scheduled to be started from the Task Scheduler by tasks with names like "Security Center Update - 1291373911" and similar. My user name was listed as the author of the tasks. I disabled the tasks, restarted the computer in safe mode and moved all of the exe files to quarantine for further investigation. All of this was done last night. I just scanned the files with Security Essentials again (not updated since yesterday) in the quarantine location and this time it found PWS:Win32/Zbot.gen!plock in urpev.exe (but not in the other exe files, which are most likely viruses, too). Category: Password Stealer Description: This program is dangerous and captures user passwords. Another strange process is browser.exe (not chrome.exe) by Google Inc., described as Google Chrome. I uninstalled Chrome but it's still there. It runs out of Users\\AppData\LocalLow\UIVoice\ToolMedium\browser.exe and if I move it in safe mode, it just reappears there, and multiple instances run. Needless to say, it I kill it, it just runs again. Couldn't see anything in Task Scheduler, but found a couple of references to it in the Registry Editor: HKEY_CURRENT_USER/Software/Microsoft/Internet Explorer/LowRegistry/Audio/PolicyConfig/PropertyStore/ HKEY_USERS/S-1-5-21-1685709306-872053864-2599010960-1002/Software/Microsoft/Internet Explorer/LowRegistry/Audio/PolicyConfig/PropertyStore/ Maybe it's a legit process, but seems kind of strange. For the time being, I suspended the process and killed all of the child processes when I booted up the laptop. I used Security Essentials to scan the system periodically, but obviously it's not effective at least against one virus. I had the "real-time protection" turned off. Would it help if it were turned on and how much of a nuisance would it be? I wonder if there is a better alternative to Security Essentials. Over the years I've used multiple antivirus products at home and especially at work and was not very happy with any of them. Apparently, asking for software recommendations or comparisons is taboo here, but I will mention that I installed Malware Bytes and it was able to find an quarantine a bunch of suspicious files, and at least some of which were truly infected, but when it scans the bogus security center update executables from Mesrosift Corporatien, it finds nothing wrong. Also, any thoughts on the browser.exe mystery? Neither MS Security Essentials nor Malware Bytes found anything wrong with that file. However, after I ran a Malware Bytes scan and quarantined everything it found suspicious and rebooted the laptop, the process did not run.

  Read the article

• Dynamic virtual host configuration in Apache

  - by Kostas Andrianopoulos

  I want to make a virtual host in Apache with dynamic configuration for my websites. For example something like this would be perfect. <VirtualHost *:80> AssignUserId $domain webspaces ServerName $subdomain.$domain.$tld ServerAdmin admin@$domain.$tld DocumentRoot "/home/webspaces/$domain.$tld/subdomains/$subdomain" <Directory "/home/webspaces/$domain.$tld/subdomains/$subdomain"> .... </Directory> php_admin_value open_basedir "/tmp/:/usr/share/pear/:/home/webspaces/$domain.$tld/subdomains/$subdomain" </VirtualHost> $subdomain, $domain, $tld would be extracted from the HTTP_HOST variable using regex at request time. No more loads of configuration, no more apache reloading every x minutes, no more stupid logic. Notice that I use mpm-itk (AssignUserId directive) so each virtual host runs as a different user. I do not intend to change this part. Since now I have tried: - mod_vhost_alias but this allows dynamic configuration of only the document root. - mod_macro but this still requires the arguments of the vhost to be declared explicitly for each vhost. - I have read about mod_vhs and other modules which store configuration in a SQL or LDAP server which is not acceptable as there is no need for configuration! Those 3 necessary arguments can be generated at runtime. - I have seen some Perl suggestions like this, but as the author states $s->add_config would add a directive after every request, thus leading to a memory leak, and $r->add_config seems not to be a feasible solution.

  Read the article

• Static file serving only works if root is a subfolder under public

  - by lulalala

  I am trying to serve static cache files using nginx. There are index.html files under the rails_root/public/cache directory. I tried the following configuration first, which doesn't work: root <%= current_path %>/public; # $uri always contains one slash(the first slash but not the last) try_files /cache$uri/index.html /cache$uri.html @rails; This give error: [error] 4056#0: *13503414 directory index of "(...)current/public/" is forbidden, request: "GET / HTTP/1.1" I then tried root <%= current_path %>/public/cache; # $uri always contains one slash(the first slash but not the last) try_files $uri/index.html $uri.html @rails; And to my surprise this works. Why is it that I can do the latter not the former( since they point to the same location) The permissions of the folders are: 775 public 755 cache 644 index.html The thing is that my favicon sitting under public/ is served correctly: # asset server server { listen 80; server_name assets.<%= server_name %>; expires max; add_header Cache-Control public; charset utf-8; root <%= current_path %>/public; }

  Read the article

• Matlab computations done over Apple Filing Protocol (AFP) depend on POSIX permissions, ignores ACLs

  - by flumignan

  I'm a system administrator and have never used Matlab, so forgive my general ignorance of the program. My users have encountered problems when executing scripted Matlab actions over AFP to a Mac OS X Server 10.6.7 where the access control list (ACL) should allow actions, but the POSIX-style permissions disallow the activity. It seems as if Matlab, run locally on the Mac workstations on datasets on the remote server, ignores the ACLs entirely. This is the only application I've ever seen behave this way. The server's filesystem is HFS+J and all other activity is performing as expected. These users cannot use CIFS because of our integration with external directory systems. In this example, the directory bxdata, the members of the group cibturner should be able to modify the files. Indeed, they can using any other method except via Matlab scripts. When the Matlab script hits these files, the POSIX permissions of 644 disallow modification. It's as if the ACLs are irrelevant. [root@cib 16:00:24 /14181.2_5sM]# ls -leh@ bxdata/ total 128 -rw-r--r--+ 1 kel32 staff 18K Feb 15 09:31 TS-5sMath030708-21073-1.edat 0: group:cibturner inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 1: group:cibsrlocaladmins inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 2: group:crcservergroup inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown -rw-r--r--+ 1 kel32 staff 25K Feb 15 09:31 TS-5sMath030708-21073-1.txt 0: group:cibturner inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 1: group:cibsrlocaladmins inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 2: group:crcservergroup inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown Because this server has HIPAA data, security is critical. We are not using networked home directories or SAN technology. The MatLab program is run on the user's hard drive; access is granted via Kerberized AFP.

  Read the article

• Moving symlinks into a folder based on id3 tags.

  - by Reti

  I'm trying to get my music folder into something sensible. Right now, I have all my music stored in /home/foo so I have all of the albums soft linked to ~/music. I want the structure to be ~/music/<artist>/<album> I've got all of the symlinks into ~/music right now so I just need to get the symlinks into the proper structure. I'm trying to do this by delving into the symlinked album, getting the artist name with id3info. I can do this, but I can't seem to get it to work correctly. for i in $( find -L $i -name "*.mp3" -printf "%h\n") do echo "$i" #testing purposes #find its artist #the stuff after read file just cuts up id3info to get just the artist name #$artist = find -L $i -name "*.mp3" | read file; id3info $file | grep TPE | sed "s|.*: \(.*\)|\1|"|head -n1 #move it to correct artist folder #mv "$i" "$artist" done Now, it does find the correct folder, but every time there is a space in the dir name it makes it a newline. Here's a sample of what I'm trying to do $ ls DJ Exortius/ The Trance Mix 3 Wanderlust - DJ Exortius [TRANCE DEEP VOCAL TECH]@ I'm trying to mv The Trance Mix 3 Wanderlust - DJ Exortius [TRANCE DEEP VOCAL TECH]@ into the real directory DJ Exortius. DJ Exortius already exists, so it's just a matter of moving it into the correct directory that's based on the id3 tag of the mp3 inside. Thanks! PS: I've tried easytag, but when I restructure the album, it moves it from /home/foo which is not what I want.

  Read the article

• Securing smtp with login

  - by Paul Peelen

  I have a ispconfig server, and it seems that someone is using it to send spam. I got about 130 "Mail Delivery System" email about declined send email. This spammer uses my email address as sent from adress, so I get all these email adresses to my mail. I am using Postfix and Courier. I installed my server according to this guide: http://www.howtoforge.com/perfect-server-debian-lenny-ispconfig3-p3 I did this a few months ago. My question: Can I secure my server to require login to be able to send email, and if so... how? Thanks! EDIT Some data from mail.log, these kind of error show up constantly: Jun 15 17:58:16 bolt postfix/qmgr[10712]: CC7DA1242AE: from=<paul@*****.se>, size=3782, nrcpt=1 (queue active) Jun 15 17:58:16 bolt postfix/smtp[11337]: CC7DA1242AE: to=<[email protected]>, relay=none, delay=4641, delays=4640/0.01/0.32/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=cmlisboa.pt type=MX: Host not found, try again) Jun 15 17:58:19 bolt postfix/smtpd[10836]: connect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: NOQUEUE: reject: RCPT from static-200-105-220-154.acelerate.net[200.105.220.154]: 550 5.1.1 <advertising@*****.com>: Recipient address rejected: User unknown in virtual mailbox table; from=<[email protected]> to=<advertising@*****.com> proto=ESMTP helo=<static-200-105-220-154.acelerate.net> Jun 15 17:58:20 bolt postfix/smtpd[10836]: lost connection after DATA (0 bytes) from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:20 bolt postfix/smtpd[10836]: disconnect from static-200-105-220-154.acelerate.net[200.105.220.154] Jun 15 17:58:29 bolt postfix/smtpd[10834]: connect from unknown[62.176.172.226] Jun 15 17:58:32 bolt postfix/smtpd[10834]: 386791241F9: client=unknown[62.176.172.226] Jun 15 17:58:34 bolt postfix/cleanup[10975]: 386791241F9: message-id=<[email protected]> Jun 15 17:58:34 bolt postfix/qmgr[10712]: 386791241F9: from=<[email protected]>, size=867, nrcpt=1 (queue active) Jun 15 17:58:35 bolt postfix/smtpd[10834]: disconnect from unknown[62.176.172.226] Jun 15 17:58:35 bolt amavis[11084]: (11084-17) Blocked SPAM, [62.176.172.226] [62.176.172.226] <[email protected]> -> <*****@*****>, Message-ID: <[email protected]>, mail_id: XczovKoMBYNr, Hits: 18.471, size: 867, 833 ms Jun 15 17:58:35 bolt postfix/smtp[10732]: 386791241F9: to=<*****@*****>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.5, delays=2.7/0/0/0.83, dsn=2.7.0, status=sent (250 2.7.0 Ok, discarded, id=11084-17 - SPAM) Jun 15 17:58:35 bolt postfix/qmgr[10712]: 386791241F9: removed Jun 15 17:58:43 bolt postfix/smtpd[10836]: warning: 178.121.154.194: address not listed for hostname mm-194-154-121-178.dynamic.pppoe.mgts.by Jun 15 17:58:43 bolt postfix/smtpd[10836]: connect from unknown[178.121.154.194] Jun 15 17:58:45 bolt postfix/smtpd[10727]: connect from unknown[180.134.223.86] EDIT #2 Got some more info from the logs, this is a send request: mail.info.1:Jun 15 16:41:57 bolt amavis[5399]: (05399-06) Passed CLEAN, [110.139.48.64] [110.139.48.64] <paul@*****.se> -> <[email protected]>, Message-ID: <CHILKAT-MID-7c54ebcf-5501-de9b-f0b1-4f0234290d8d@HP-IRISH>, mail_id: 35l56Ramx6Nc, Hits: -2.941, size: 3329, queued_as: 2485770086, 136 ms mail.info.1:Jun 15 16:41:57 bolt postfix/smtp[4743]: 375C570082: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=4.8, delays=4.7/0/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=05399-06, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 2485770086) Which apparently got thrue. Any ideas how to restrict this?

  Read the article

• Email test deferred (mail transport unavailable) with ClamAV

  - by dirt

  I'm trying to set up a simple new mail server; when I send a test email to the server the email is getting hung up during delivery (user mapping is found) and the email is never found in /home/user/Maildir/new Here is my maillog after a fresh reboot and test email, there are a few warnings I am unfamiliar with. Can you please point me in the right direction? Oct 25 14:54:57 loki dovecot: master: Dovecot v2.0.9 starting up (core dumps disabled) Oct 25 14:54:58 loki postfix/postfix-script[1369]: starting the Postfix mail system Oct 25 14:54:58 loki postfix/master[1370]: daemon started -- version 2.6.6, configuration /etc/postfix Oct 25 14:56:00 loki postfix/tlsmgr[1457]: warning: request to update table btree:/etc/postfix/smtpd_scache in non-postfix directory /etc/postfix Oct 25 14:56:00 loki postfix/tlsmgr[1457]: warning: redirecting the request to postfix-owned data_directory /var/lib/postfix Oct 25 14:56:00 loki postfix/smtpd[1455]: connect from mail-ob0-f180.google.com[209.85.214.180] Oct 25 14:56:01 loki postfix/smtpd[1455]: 1CF5E20A8B: client=mail-ob0-f180.google.com[209.85.214.180] Oct 25 14:56:01 loki postfix/cleanup[1461]: 1CF5E20A8B: message-id= Oct 25 14:56:01 loki postfix/qmgr[1379]: 1CF5E20A8B: from=, size=1788, nrcpt=1 (queue active) Oct 25 14:56:01 loki postfix/qmgr[1379]: warning: connect to transport private/scan: No such file or directory Oct 25 14:56:01 loki postfix/error[1462]: 1CF5E20A8B: to=, orig_to=, relay=none, delay=0.18, delays=0.15/0.02/0/0.01, dsn=4.3.0, status=deferred (mail transport unavailable) Oct 25 14:56:01 loki postfix/smtpd[1455]: disconnect from mail-ob0-f180.google.com[209.85.214.180] master.cf snippets: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd submission inet n - n - - smtpd -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING smtps inet n - n - - smtpd -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING scan unix - - n - 16 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes 127.0.0.1:10026 inet n - n - 16 smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks_style=host -o smtpd_authorized_xforward_hosts=127.0.0.0/8

  Read the article

• Access violations on Windows 2008 VPS

  - by James Hay

  I'm running a Windows 2008 VPS with 2GB RAM. I'm trying to install hMailServer on the VPS but when I get to the "choose installation directory" dialog I get error messages that keep popping up and make it so that I cannot continue. As soon as the dialog opens I get these two errors: "Access violation at address 73F53560. Read of addresss 00000014." "Access violation at address 73EEBE21. Read of addresss 00000018." Once I close these it frees up again but as soon as I click "Browse.." (to choose the directory) I get the following errors repeatedly that reopen if I close them. "Access violation at address 73F0E371. Read of address 00000014." "Access violation at address 73F4A006. Read of address 00000000." I have no idea how to fix these. I can't run memory diagnostics, I assume because it's a VPS and not an actual server.

  Read the article

• Multiple Homed Windows 2008 Server / Windows 7 Client

  - by Daniel Scott

  I have a small Windows 2008 network, with some Windows 7 clients. The clients are both laptops with docking stations and I would like them to communicate with the Windows 2008 server (for filesharing) through the wired network whilst they're docked. Internet connectivity for all machines (clients and server) is via a Wireless LAN, so the wireless adapter in the Windows 7 clients stays active while they're docked. When the laptops are un-docked, it would be nice to still be able to contact the windows 2008 server for print sharing (and slower file sharing) - hence the server also being on the wireless LAN. The windows 2008 server is running Active Directory, DHCP and DNS. It controls DHCP leases on the wired network and holds the DNS records for "myserver.mycompany.local", which is what the filesharing clients connect to. Ideally I'd like the DNS records to return the wired IP first so that this is the address that the laptops will attempt initially - but there doesn't seem to be a way to do that? At present the server's IP on the wireless LAN comes out of an nslookup above the wired Lan IP. The multi-homing works perfectly - but in the wrong order! Switch on the wireless lan and ping myserver and it goes to the wireless IP. Disable the wireless on the client and do the same ping again and after a couple of seconds it starts pinging the wired address. Does anyone have any suggestions on how to make this work in a predictable order? - or even if it can work. Alternative 1? If it can't work, then would this work: Remove the wireless adapter from the server, put a wireless router/bridge on the wired network (set up to route to/from the wireless LAN's subnet), then configure the clients with two routes to the (now) single IP of the server with metrics favouring direct communication over the wired LAN first? Alternative 2? Should I instead single-home the laptops so all of their connectivity is via the wired-LAN while they're docked? (and route via the windows 2008 server - or a dedicated wireless bridge/router)? My concern here is that I'd like undocking to be seamless - and if the clients are in the middle of downloading something from the internet I wouldn't want whatever they're doing interupted as they switch IP addresses onto the Wireless network. Perhaps this isn't the case and I'm concerned over nothing? Any thoughts? :) UPDATE I seem to have cracked it (at least DNS entries come out in the order I hope for - and pinging the server with various combinations of wired, wireless and both interfaces enabled uses the IP I want) ... I set the binding order of the NICs on the Server (which is acting as Domain Controller, DHCP and DNS server) so that the Wired NIC is before the Wireless adapter. (Start -- type "Network Interfaces" -- Select "View Network Connections" -- Press Alt to show classic dropdown menus -- Advanced -- Advanced Settings) Now, an nslookup (from the client) of the server's hostname returns the Wired IP first, followed by the Wireless IP. The wired IP now seems to be used whenever it's contactable. Incidentally, the metrics on the wired and wireless routes (on the client) also favour the wired LAN (based on Windows' automatically assigned metrics) - but this was always the case, even when I was having trouble getting the wired IP to be "favoured". I'm not entirely sure if this is coincidence - or if a DNS server running on Windows, handing back IP addresses for itself does actually take the binding order of it's own network interfaces into account? It would be interesting to hear from someone who can confirm or deny that (or confirm that the binding order on the server plays a role for some other reason?)

  Read the article

• Can't get port based virtual hosts working in Apache2.2 CentOS 5.2, Plesk 8.6

  - by soopadoubled

  I have installed Google Sitemap Generator on my CentOS server, which is running plesk 8.6. Google Sitemap Generator adds an include to an external conf in my httpd.conf as follows: Listen 8181 NameVirtualHost *:8181 <VirtualHost *:8181> DocumentRoot "/usr/local/google-sitemap-generator/admin-console" ScriptAlias /cgi-bin/ "/usr/local/google-sitemap-generator/admin-console/cgi-bin/" <Directory "/usr/local/google-sitemap-generator/admin-console"> Allow from all Options ExecCGI DirectoryIndex index.html </Directory> </VirtualHost> LoadModule google_sitemap_generator_module /usr/local/google-sitemap-generator/lib/mod_sitemap.so After installation I should be able to navigate to myserverip:8181 and access the GSG console. Unfortunately my browser throws up "Safari can’t open the page “http://myserverip:8181/” because the server where this page is located isn’t responding." I've checked the port with netstat and nmap, and it's open and listening. I've added a rule to allow traffic on 8181 in iptables, but no joy. Is there anything obvious I could be missing? Any ideas would be greatly appreciated. Cheers, Ian

  Read the article

• Nagios notifications definitions

  - by Colin

  I am trying to monitor a web server in such a way that I want to search for a particular string on a page via http. The command is defined in command.cfg as follows # 'check_http-mysite command definition' define command { command_name check_http-mysite command_line /usr/lib/nagios/plugins/check_http -H mysite.example.com -s "Some text" } # 'notify-host-by-sms' command definition define command { command_name notify-host-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$ :Host$HOSTALIAS$ is $HOSTSTATE$ ($OUTPUT$)" } # 'notify-service-by-sms' command definition define command { command_name notify-service-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ ($OUTPUT$)" } Now if nagios doesn't find "Some text" on the home page mysite.example.com, nagios should notify a contact via sms through the Clickatell http API which I have a script for that that I have tested and found that it works fine. Whenever I change the command definition to search for a string which is not on the page, and restart nagios, I can see on the web interface that the string was not found. What I don't understand is why isn't the notification sent though I have defined the host, hostgroup, contact, contactgroup and service and so forth. What I'm I missing, these are my definitions, In my web access through the cgi I can see that I have notifications have been defined and enabled though I don't get both email and sms notifications during hard status changes. host.cfg define host { use generic-host host_name HAL alias IBM-1 address xxx.xxx.xxx.xxx check_command check_http-mysite } *hostgroups_nagios2.cfg* # my website define hostgroup{ hostgroup_name my-servers alias All My Servers members HAL } *contacts_nagios2.cfg* define contact { contact_name colin alias Colin Y service_notification_period 24x7 host_notification_period 24x7 service_notification_options w,u,c,r,f,s host_notification_options d,u,r,f,s service_notification_commands notify-service-by-email,notify-service-by-sms host_notification_commands notify-host-by-email,notify-host-by-sms email [email protected] pager +254xxxxxxxxx } define contactgroup{ contactgroup_name site_admin alias Site Administrator members colin } *services_nagios2.cfg* # check for particular string in page via http define service { hostgroup_name my-servers service_description STRING CHECK check_command check_http-mysite use generic-service notification_interval 0 ; set > 0 if you want to be renotified contacts colin contact_groups site_admin } Could someone please tell me where I'm going wrong. Here are the generic-host and generic-service definitions *generic-service_nagios2.cfg* # generic service template definition define service{ name generic-service ; The 'name' of this service template active_checks_enabled 1 ; Active service checks are enabled passive_checks_enabled 1 ; Passive service checks are enabled/accepted parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems) obsess_over_service 1 ; We should obsess over this service (if necessary) check_freshness 0 ; Default is to NOT check service 'freshness' notifications_enabled 1 ; Service notifications are enabled event_handler_enabled 1 ; Service event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts notification_interval 0 ; Only send notifications on status change by default. is_volatile 0 check_period 24x7 normal_check_interval 5 retry_check_interval 1 max_check_attempts 4 notification_period 24x7 notification_options w,u,c,r contact_groups site_admin register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE! } *generic-host_nagios2.cfg* define host{ name generic-host ; The name of this host template notifications_enabled 1 ; Host notifications are enabled event_handler_enabled 1 ; Host event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts max_check_attempts 10 notification_interval 0 notification_period 24x7 notification_options d,u,r contact_groups site_admin register 1 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE! }

  Read the article

• trying to allow domain admins access in apache

  - by sharif

  I am trying to authenticate domain admins through apache and it is not working. Error i get is as follows [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(1432): [client 172.16.0.85] kerb_authenticate_user entered with user (NULL) and auth_type Kerberos [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(915): [client 172.16.0.85] Using HTTP/[email protected] as server principal for password verification [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(655): [client 172.16.0.85] Trying to get TGT for user [email protected] [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(569): [client 172.16.0.85] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Mon Sep 24 14:54:45 2012] [debug] src/mod_auth_kerb.c(994): [client 172.16.0.85] kerb_authenticate_user_krb5pwd ret=0 [email protected] authtype=Basic [Mon Sep 24 14:54:45 2012] [debug] mod_authnz_ldap.c(561): [client 172.16.0.85] ldap authorize: Creating LDAP req structure [Mon Sep 24 14:54:45 2012] [debug] mod_authnz_ldap.c(573): [client 172.16.0.85] auth_ldap authorise: User DN not found, LDAP: ldap_simple_bind_s() failed Below is what I have in my httpd file Alias /compass "/data/intranet/html/compass" <Directory "/data/intranet/html/compass"> AuthType Kerberos AuthName KerberosLogin KrbServiceName HTTP/intranet.xxx.com KrbMethodNegotiate On KrbMethodK5Passwd On KrbAuthRealms xxx.COM Krb5KeyTab /etc/httpd/conf/intranet.keytab # require valid-user # Options Indexes MultiViews FollowSymLinks # AllowOverride All # Order allow,deny # Allow from all # SetOutputFilter DEFLATE # taken from http://blogs.freebsdish.org/tmclaugh/2010/07/15/mod_auth_kerb-ad-and-ldap-authorization/ # download extra module and install # Strip the kerberos realm from the principle. # MapUsernameRule (.*)@(.*) "$1" AuthLDAPURL "ldap://echo.uk.xxx.com akhutan.usa.xxx.com/dc=xxx,dc=com?sAMAccountName" AuthLDAPBindDN cn=Administrator,ou=Users,dc=xxx,dc=com AuthLDAPBindPassword *** Require ldap-group cn=Domain Admins,ou=Users,dc=xxx,dc=com </Directory> I have followed this guide. I have download and install the tarball. when I try to uncomment MapUsernameRule i get failed error when restarting apache Reloading httpd: not reloading due to configuration syntax error I am using centos 5 64bit. I have added the following line but i still get syntax error LoadModule mod_map_user modules/mod_map_user.so

  Read the article

• Why doesn't my symbolic link work?

  - by orokusaki

  I'm trying to better understand symbolic links... and not having very much luck. This is my actual shell output with username/host changed: username@host:~$ mkdir actual username@host:~$ mkdir proper username@host:~$ touch actual/file-1.txt username@host:~$ echo "file 1" > actual/file-1.txt username@host:~$ touch actual/file-2.txt username@host:~$ echo "file 2" > actual/file-2.txt username@host:~$ ln -s actual/file-1.txt actual/file-2.txt proper username@host:~$ # Now, try to use the files through their links username@host:~$ cat proper/file-1.txt cat: proper/file-1.txt: No such file or directory username@host:~$ cat proper/file-2.txt cat: proper/file-2.txt: No such file or directory username@host:~$ # Check that actual files do in fact exist username@host:~$ cat actual/file-1.txt file 1 username@host:~$ cat actual/file-2.txt file 2 username@host:~$ # Remove the links and go home :( username@host:~$ rm proper/file-1.txt username@host:~$ rm proper/file-2.txt I thought that a symbolic link was supposed to operate transparently, in the sense that you could operate on the file that it points to as if you were accessing the file directly (except of course in the case of rm where of course the link is simply removed).

  Read the article

• Tell VLC where to look for plugins.dat file

  - by puk

  I am trying to build vlc from source (I will include installation script below), but when I try to run vlc I get the following error main libvlc warning: cannot read /home/user/downloads/vlc3/vlc/src/.libs/vlc/plugins/plugins.dat (No such file or directory) Why is it even looking in that non existant directory? The plugins.dat file is in /usr/lib/vlc/plugins/. I tried export VLC_PLUGIN_PATH=/usr/lib/vlc/plugins/ But it still looks in that non existent path. I can create a symbolic link, but that is a terrible way to do it. If in 6 months I delete my downloads folder, all of a sudden my vlc will break. Here is the script I am running to install: ./configure --enable-rpi-omxil --enable-dvbpsi --enable-x264 --enable-xcb --with-x --enable-xvideo --enable-sdl --enable-avcodec --enable-avformat --enable-swscale --enable-mad --enable-a52 --enable-libmpeg2 --enable-dvdnav --enable-faad --enable-vorbis --enable-ogg --enable-theora --enable-mkv --enable-freetype --enable-fribidi --enable-speex --enable-flac --enable-live555 --enable-caca --enable-skins2 --enable-alsa --enable-ncurses --enable-debug --enable-lirc --enable-live555 --enable-shout --enable-taglib --enable-vcdx --enable-realrtsp --enable-svg --enable-dvdread --enable-dc1394 --enable-twolame --enable-dirac --enable-aa --enable-jack --enable-bluray --enable-opencv --enable-sftp --enable-pulse --enable-projectm --enable-vsxu --enable-atmo --enable-glspectrum '--with-extra-libs=/usr/local/lib' '--with-extra-includes=/usr/local/include' '--x-libraries=/usr/local/lib' '--x-includes=/usr/local/include' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' EDIT: I am using the following version: VLC media player 2.2.0-git Weatherwax (revision 2.1.0-git-1168-g5804dd1) And the --plugin-path option is no longer supported.

  Read the article

• 502: proxy: pass request body failed

  - by Andrei Serdeliuc

  Sometimes I get the following error (in apache's error.log) when viewing my site over https: (502)Unknown error 502: proxy: pass request body failed to xxx.xxx.xxx.xxx:443 I'm not entirely sure what this is and why it happens, it's also not consistent. The request route is: Browser Proxy server (apache with mod_proxy + mod_ssl) Load balancer (aws) Web server (apache with mod_ssl) The configuration on the proxy server is as follows: <VirtualHost *:443> ProxyRequests Off ProxyVia On ServerName www.xxx.co.uk ServerAlias xxx.co.uk <Directory proxy:*> Order deny,allow Allow from all </Directory> <Proxy *> AddDefaultCharset off Order deny,allow Allow from all </Proxy> ProxyPass / balancer://cluster:443/ lbmethod=byrequests ProxyPassReverse / balancer://cluster:443/ ProxyPreserveHost off SSLProxyEngine On SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /var/www/vhosts/xxx/ssl/www.xxx.co.uk.cert SSLCertificateKeyFile /var/www/vhosts/xxx/ssl/www.xxx.co.uk.key <Proxy balancer://cluster> BalancerMember https://xxx.eu-west-1.elb.amazonaws.com </Proxy> </VirtualHost> Any idea what the issue might be?

  Read the article

< Previous Page | 540 541 542 543 544 545 546 547 548 549 550 551  | Next Page >