Search Results

Search found 14789 results on 592 pages for 'pro backup'.

Page 546/592 | < Previous Page | 542 543 544 545 546 547 548 549 550 551 552 553  | Next Page >

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing.

  Read the article

• Which RAM is faster (or, is Crucial's Memory Advisor giving non-optimal advice)?

  - by adpe

  In general, if a PC's motherboard is only specified for RAM up to a given core speed x, will that PC be faster with: RAM of latency y capable of running at a maximum core speed >x or RAM of latency <y capable of running at a maximum core speed of exactly x ? I would have thought the latter, but Crucial's Memory Adviser tool advises the former. So, which of us is correct - me, or the machine? (Here is a concrete example: I wish to upgrade a Toshiba Satellite Pro L300-155 laptop from its current 1GB RAM to 2GB Crucial RAM. The laptop's specifications are given here. I see from those specifications that the laptop is designed for DDR2-667 Ram. Crucial sells two compatible 2GB kits, priced exactly the same as each other: DDR2-667, CL=5; DDR2-800, CL=6. It seems to me that of these two upgrade kits, the first kit would run slightly faster on the L300-155 than the second, because both will presumably be capped at DDR2-667 core speed (see laptop specs), but the second kit has more latency. However, Crucial's Memory Advisor tool recommends the second kit.)

  Read the article

• System randomly freezes yet mouse still moves

  - by user784446

  This problem has lasted for the past 48 hours. The first time it happened, a program I was running stopped responding, so I tried to end it from task manager. The processes at first were listed fine until hovered upon. Eventually, despite the mouse still being able to move, after a few persisting clicks the mouse finally stopped moving. The screen went blank shortly thereafter. The second time it occurred, items on the screen stopped responding - hovering over the taskbar or such wouldn't elicit a response. Sound would still play however. Eventually, the mouse became unresponsive and the system restarted itself. I suspect that it may be a problem of my SSD drive. After looking through some Google search results, I downloaded HDTunePro to determine if there's a problem with the drive. Results returned a problem of reallocated sector count. An error scan also revealed 48 bad sectors. Also, an attempt to backup the contents of the most important areas of the drive returned a few explorer "Error: cannot read source from disk" errors. Should I ditch the drive and use another drive or is there anything that can be done to repair the drive? SSD: OCZ Petrol 64gb CPU: AMD Athlon II X4 640 RAM: Generic 3GB DDR2 Motherboard: Gigabyte MA74GM-S2H OS: Windows 7 Ultimate x64 Thanks!

  Read the article

• How do I setup a secondary incoming mail server?

  - by abrahamvegh

  I currently have a server running Debian 6, with postfix and dovecot handling email. This server hosts email for a number of domains and users, so I use MySQL as my backing store for users and forwardings and everything related. Currently, this server is the only server listed in an MX record for all of the domains it serves. I would like to create a secondary server that would be listed in the DNS with a lower priority (e.g. current primary server is priority 5, secondary would be priority 10), so that in the event that I need to reboot the primary server, or otherwise make it unavailable, the secondary server would receive email, and hold it until the primary server came back up, at which point it would deliver any held email to the primary server. I do not need the secondary server to function as a backup sending server. Users would never need to see the secondary server, they would simply not lose incoming emails if the primary server is down, and they would be unable to send or receive until the primary came back up. How would I go about doing this? I would like to use the same software if they can handle this task, because I’m already familiar with managing them.

  Read the article

• mail server checklist..

  - by Jeff

  currently we ran into some issues with our mail server setup. im preparing a list of actions that we should enforce and use in order to maintain a proper email solution within our company. we have around 80 exchange users, and send mass emails out almost on a monthly bases to 20,000 + customers each time.. the checklist i currently have: 1) mcafee mxlogic 'cloud' anti-spam functionality for incoming message. 2) antivirus on each computer in company 3) antivirus on exchange and DNS servers 4) setup SPF record 5) setup DKIM 6) setup domainkey 7) setup senderID 8) submit spf to microsoft, yahoo, etc. for 'whitelist' purposes. 9) configure size limits for messages in exchange to safe numbers 10) i have 2 outside IPs for my email server, incase one gets blacklisted, switch to the backup. 11) my internet site rests on a different ip than the mail server 12) all mass emails for company sent through 3rd party company (listtrak.com) 13) setup domain alias, media, enews, and bounce for the 3rd party mass mail software. 14) verify the setup using [email protected] 15) configure group policy and our opendns.org account to prevent unwanted actions and website viewing mass emails: 1) schedule them to send different amounts at different times (1,000 at 10am, 1,000 at 4pm, 1,000 10am next day).. 2) setup user prefences, decide what they want to receive ect. ( there interests) 3) send a more steady flow of email, maybe 100 a week with top new products instead of 20,000k every other month.. if anyone has suggestions or additions/subtractions to this checklist they are greatly appreciated. thank you

  Read the article

• Giving the root user priority to maintain Debian (while server collapsing under heavy load)

  - by Saix

  Is there any way to setup Debian to prioritize any or specific root's activity before every other? For instance, several times per year something gets wrong (usually man's fault by overstressing apache/mysql) and system gets unresponsive under heavy load like 200 (8-core cpu). I know there are limits for php scripts to run then kill, but that's not the way because this limit has to be at least 45 minutes long. The problem is, until I'm able to login via SSH and let apache/mysql restart under this server stress, it nearly hits these 45 minutes anyway. Also hardware restart causing usually to run fsck at boot time on all harddrives since it's usually pretty long the box haven't been restarted. I was told it's really not good idea disabling fsck but then again, it takes more then hour to complete. What is the fastest way to restart apache/mysql? Is there any way to give ssh users or root user higher priority so the logging in and completing these restarts (rather stops though) commands wouldn't take so long? One comes to my mind.. use NICE for apache/mysql but no way. I can't risk limiting those two vital apps 24/7 or could I? I'm a little bit scared if any other system process wouldn't slow the pages down too much. Any backup process, swap (if any) etc. There is pretty heavy PHP framework with 20k visits a day, so it needs every hw/sw resource available. I can't throttle it the whole time, just in certain points when system gets unresponsive, so I could maintain it.

  Read the article

• Software for RAID Failure Alerts?

  - by QF_Developer

  I have two 256 GB Samsung 840 Pro SSD disks in a RAID 1 array. I would like to receive a notification if one of the disks in the array fails. Can anybody recommend an application I can install on the server to fire an email if such an event occurs? Here are some additional specs: Supermicro X9SCM-IIF motherboard utilising the hardware RAID controller. OS = Windows 2012 Standard Also is it possible to simulate a disk failure by pulling it out of the bay? SSDs appear to fail close together when in a mirrored config so I'd like to know ASAP if one goes down so I can swap them out with minimum delay. UPDATE 26th June 2013 ------------------------ None of the software that ships with the Supermicro X9SCM-* motherboards offer support for RAID monitoring. As has been pointed out here, these boards are built on an Intel chipset for RAID and so I installed Intel Rapid Storage Technology that supports automated email notifications on RAID failure http://www.intel.com/support/chipsets/imsm/sb/cs-020784.htm One small issue, the software only allows you to send email notifications without SMTP authentication. There's a bunch of different workarounds here: http://communities.intel.com/thread/30771

  Read the article

• RSS "Newspaper" / Google Reader replacement

  - by Sean D

  With the impending demise of Google Reader I've been looking at ways to replace it. I've decided that what might be cool is to get an email every morning, with all the updates from the last twenty-four hours, maybe in the style of a newspaper. That's not a very original idea, since sites like http://fivefilters.org/pdf-newspaper/ and http://feedjournal.com/ already do this, but they both have various drawbacks. In particular both require a single feed, will just take the last n items, and clicking around on their website. The Pro option for feedjournal seems almost like it would do the job, but the project seems to be dead, and there's no way to buy it. Before I hack together something crazy I'd like to know if there's a better solution to my problem. In short: I want to replace Google Reader with a daily pdf email, how should I do this? edit: I didn't award the bounty because nobody solved the problem (not that I'm assuming it has a solution). Answers like "well for the way I do things this wouldn't work" aren't actually helpful, even if they are well-meaning.

  Read the article

• Timeperiod Setting

  - by Alvin G. Matunog

  I am running Nagios 3.2.3 on CentOS 5.7 32bit and I have a bit of a problem scheduling timeperiods. Please help me. Objective, to stop monitoring during server restart (since the server will be restarted and will be restarted automatically because of updates and system backup). The restart is scheduled every 1st Sunday of every month. My monitoring runs 24x7 but during restarts I want to stop the monitoring and resume after 30 mins. So every 1st Sunday I want my schedule to be 00:00-11:30,12:00-24:00. This means that it will stop at 11:30 and resumes on 12:00nn. If I set this on every Sunday there is no problem. But if I set this time on every 1st Sundays, it stops at 11:30 but resumes on the next day (Monday) and not on 12:00nn Sunday. I don't know what I am missing. If I set on regular weekdays there is no problem. But on Offset weekdays (1st Sunday) it doesn`t work the way it should have. Here is my definition; define timeperiod{ name 1st_sunday timeperiod_name 1st_sunday alias No monitoring every 1st Sunday thursday 1 00:00-11:30,12:00-24:00 } define timeperiod{ timeperiod_name irregular alias regular checking use 1st_sunday sunday 08:30-22:00 monday 08:30-22:00 tuesday 08:30-22:00 wednesday 08:30-22:00 thursday 08:30-19:10,19:20-22:00 friday 08:30-22:00 saturday 08:30-22:00 } Can anyone help me? Please? Thank you.

  Read the article

• JavaScript settings are on but I still have issues with web sites using JavaScript.

  - by Mike

  I have two computers that are the same at home except I have installed Adobe Acrobat 9 Pro Extended on my main computer along with the 2010 Outlook (Beta). I have issues when I log into a website that uses pop up calendars to select the date. I pasted it below. I checked my other computer and it is fine. I've checked the Java setting and they are correct. I am at a loss. Any suggestions? Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPDTDF; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; eMusic DLM/4; .NET4.0C) Timestamp: Mon, 26 Jul 2010 22:03:59 UTC Message: 'CalendarPopup' is undefined Line: 390 Char: 2 Code: 0 Message: 'CalendarPopup' is undefined Line: 410 Char: 2 Code: 0

  Read the article

• Viability of Mac OS X 10.9 Time Machine Server in office environment

  - by user197609

  Currently we have about 20 Mac OS 10.9 MacBook Pros (almost all with SSDs) backing up to individual USB drives. I'd like to consolidate these to one drobo thunderbolt drive array attached to a Mac Mini server (running 10.9 server) using time machine server. My question is, will this scale to 20 users? Examples I have seen seem to be 5 or 6 users tops, and this isn't easy for me to test (I'd rather not ask everyone to backup to the array and then switch back to USB drives if it brings our network to its knees). My primary concern is saturating our gigabit network, as time machine backs up every hour for every machine, so there would usually be a couple people backing up at any given time. We also have some people occasionally on our 802.11ac network and not on ethernet (usually connected via 802.11n until people upgrade to newer machines), but most of the time people are connected to our thunderbolt displays which have a gigabit ethernet connection on them. Our network topology is one 32 port gigabit switch with 5 smaller gigabit switches at each desk cluster. The mac mini server is connected directly to the top level switch. Update: Failing information from someone who has done this in practice, I suppose my question is really around how switches work. If three or four people are backing up simultaneously, and then other two (different) users transfer a file between each other, will they be able to transfer the file at gigabit speeds?

  Read the article

• Windows 7 Sharing issue on RAID 5 Array(s)

  - by K.A.I.N

  Greetings all, I'm having a very odd error with a windows 7 ultimate x64 system. The network system setup is as follows: 2x XP Pro 32 Bit machines 1x Vista ultimate x64 machine 2x Windows 7 x64 Ultimate machines all chained into 1x 16 port netgear prosafe gigabit switch, the windows 7 & vista machines are duplexed. Also there is a router (netgear Rangemax) chained off the switch I am basically using one of the windows 7 machines to host storage & stream media to other machines. To this end i have put 2x 3tb hardware RAID 5 arrays in it and assorted other spare disks which i have shared the roots of. The unusual problems start when i am getting Access denied, Please contact administrator for permission blah blah blah when trying to access both of the RAID 5 arrays but not the other stand alones. I have checked the permission settings, i have added everyone to the read permission for the root, i have tried moving things into sub directories then sharing them. I have tried various setting combinations in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa and always the same. I have tried flushing caches all round, disabling and re-enabling shares & sharing after restart as well as several other things & the result is always the same... No problem on individual drives but access denied on both the RAID arrays from both XP & Vista & Windows 7 machines. One interesting quirk that may lead to an answer is that there is no "offline status" information regarding the folders when you select the RAID 5s from a windows 7 machine yet there is on the normal drives which say they are online. It is as if the raid is present but turned off or spun down but as far as i was aware windows will spin an array back up on network request and on the machine itself the drives seem to be online and can be accessed. Have to admit this has me stumped. Any suggestions anyone? Thanks in advance for any fellow geek assistance. K.A.I.N

  Read the article

• 20 1TB drives vs. 10 2TB drives in RAID5/6 server

  - by Hunter

  Hi everyone, I will be setting up a server at work and I need some advice on some details. The setup will be one blade-type server (8-core, 16GB RAM) with two subsystems - one for the main storage the other to back it up. I'm shooting for a 20TB array (I know it'll be less after formatting and parity drives). So is there any advantage one way or the other with either 20 1TB drives or 10 2TB drives? I'm not sure right now how many controllers I should have either (in the quote I have is a dual-port controller). I would think two controllers for a server of this size would be a better choice than the dual-port controller (but I really don't know). And would an array of this size have any performance issues in RAID 5 or 6 (I know RAID 5 or 6 are "slower" because of all the parity calculations). Also, these will be either WD RE3 (1TB) or the RE4 (2TB). Oh, also, for the backup array would it be ok to use the WD 2TB green drives (also in RAID5 or 6)?

  Read the article

• Searching SharePoint site with Windows Explorer

  - by alexsome

  Every week, I manually backup recent versions of the files on my group's SharePoint site. I open the library in Windows Explorer, search for all files modified in the past week, then copy and paste them to a network location. We need this process because our SharePoint site has a quota that we would easily meet if we had unlimited versions, so we keep a history of older versions on the network. Recently I got an upgrade to my work computer and I am unable to search the site using Windows Explorer. When I run the search for files modified in the last week no results are returned. If I run a search with no criteria on the file library, all the files are found but the "modified on" field is blank. So the search results only have the file and type fields. The new computer has Windows XP, just like the old one did. I hope this makes sense. Does anyone have any clue what the problem could be? I'd be happy to provide more info if necessary. It's bugging me to no end and I'm not even sure where to begin looking - it's either a trivial issue or a very obscure one. Thanks a lot.

  Read the article

• Log Problem and bash script

  - by GvWorker

  Hello Guys, I have 11 Debian servers running on rackspace cloud hosting. All running VHCS2 for hosting management. 1 server is used for application and 10 are used for only smtp. My question is regarding smtp servers. Each server hosted 1 domain. My problem is when my client use smtp there's a log created in this directory /var/log/ but within 24 hours drives are full and server refuse all smtp connections. Then I deleted the logs and ran following command to check the disk space. df -h but it shows hdd still full and server is still refusing the smtp connections. Then I ran following command to see the truth du --max-depth=1 -h It shows the truth. The real disk space used. Then I rebooted the server and now server working fine. But after few hours same situation happened. Then I created the following script. #!/bin/sh rm -fr /var/log/* rm -fr /var/log/apache2/*.log rm -fr /var/log/apache2/*.log.* rm -fr /var/log/apache2/users/* rm -fr /var/log/apache2/backup/* reboot It worked for days but after that logs are again filling the hdd. Now I want the following solutions. If anybody can help me. When I delete files from server hdd will free up without rebooting Log should be in specific range. Like a specific size of file where old data overwrite with new data

  Read the article

• Why is my rsync so slow?

  - by iblue

  My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

  Read the article

• My scanner isn't responding. It is connected to a SCSI interface using Windows XP

  - by Bob

  I have a Microtek ScanMaker 9600XL scanner. The best part about it is that it is 12x17 inches. Wowza! The worst part about it is that I've had it working at one point, with the same cable, same card, same computer, but have since re-installed Windows XP on it. Currently it will turn on, and blink the Power and Ready lights. They should be solid. I've done my best to find documentation for this, but all I've really gotten is the content on the Microtek site. I've tried turning the scanner on, then the PC. Turning the PC on, then the scanner. When I try launching the software it pops up a dialog saying "ScanWizard Pro can't find any scanners! Use SCSI Check to find a scanner." I know the scanner has a pair of little buttons on the back. These cycle up/down a counter. I think it goes 0-7. Any thoughts on what that does, or how to proceed troubleshooting? I think my next step is to try each of those numbers, and do both pc booted first, and scanner booted first for each of those numbers...

  Read the article

• Truecrypt files corrupted after moving PC into another case

  - by Dygerati

  I recently bought a new PC case and transferred all of my PC hardware into it. The only hardware modification was the addition of two identical ram modules. The entire process went smoothly, and everything worked and booted as before. The only side-effect I found when accessing one my of file-based hidden truecrypt volumes shortly there after. Some of the files in the volume - NOT all - seemed to be entirely corrupted. The directory and file names are garbled characters, but a few of the directories in the same volume appear and function normally. Also, all files in the non-hidden tc volume were still intact. Is this not weird? The only other real change I could think of would be that the hard drives were connected to different SATA ports on the mobo. I really don't know how the truecrypt encryption works well enough to know what could cause this...and the fact that not all the files were corrupted makes it more bizarre still. So, first off (and I'm not too hopeful on this point), would it be possible to restore these files? I had a backup of most, but not all of the files involved. Other than that I'm just curious how this happened and how I can prevent it next time. Thanks!

  Read the article

• mysqldump isn't able to export a specific database, phpMyAdmin crashes

  - by Devils Child

  I'm experiencing problems with a database on my server (Note: All other databases work fine). Once I try to export it with mysqldump I get this error: # mysqldump -u root -pXXXXXXXXX databasename > /root/databasename.sql mysqldump: Couldn't execute 'show table status like 'apps'': Lost connection to MySQL server during query (2013) Also, phpMyAdmin throws an error when selecting this database and immediately logs out. However, the web site which uses this database works fine. I can also execute SELECT statements on the table named "apps" from the MySQL shell. I tried restarting the MySQL daemon as well as REPAIR DATABASE and REPAIR TABLE but the problem still persists. I had this problem before, then it disappeared somehow without me doing anything to resolve the issue. Now, the problem is back and I'm simply unable to create a backup of this database. Used software Debian 6.0.7 x64 MySQL 5.1.66-0 MySQL Version: mysql> SHOW VARIABLES LIKE "%version%"; +-------------------------+-------------------+ | Variable_name | Value | +-------------------------+-------------------+ | protocol_version | 10 | | version | 5.1.66-0+squeeze1 | | version_comment | (Debian) | | version_compile_machine | x86_64 | | version_compile_os | debian-linux-gnu | +-------------------------+-------------------+

  Read the article

• Huh? JDK not found? (on Windows 7 64-bit)

  - by Android Eve

  I am setting up a development environment for the latest Android 2.3 on a fresh install of Windows 7 64-bit. I first installed the 64-bit JDK 6 (jdk-6u23-windows-x64.exe). Then, I installed 64-bit Eclipse Classic 3.6 (eclipse-SDK-3.6.1-win32-x86_64.zip). Then, I proceed to install the Android SDK Starter Package: installer_r08-windows.exe. But... upon start it says: "Java SE Development Kit (JDK) not found." Why? I just installed it. Is this a mismatch between 32-bit and 64-bit? How do I solve this? Update (1): I tried setting the %JAVA_HOME% environment variable, as well as setting the Installed JREs in Eclipse, as suggested below. None of these solved the problem. It appears that I am not the only experiencing the problem, as this thread suggests: http://stackoverflow.com/questions/1919340/android-sdk-setup-under-windows-7-pro-64-bit I wonder whether there is a 64-bit version of the Android SDK. Update (2): I used the zip version instead (android-sdk_r08-windows.zip), ran android.bat, updated all SDK packages, and installed the ADT plugin (8.0.1), not before having to check: 'Contact all update sites during install to find required software'. We'll see how this goes... Update (3): It worked! (going to accept @bubu's answer shortly) -- but why doesn't the emulator include the HelloAndroid app when I run it (Ctrl+F11) from Eclipse?

  Read the article

• query keepalived

  - by tdimmig

  *Note: I have trouble deciding what should go in serverfault and what should go in superuser, if some kindly admin decides this is in the wrong place please move it for me - many thanks. I am implementing a basic HA system with keepalived. I only want to be notified of the failover in the case of hardware failure. I do, however, have the servers switch roles periodically. I have a track_script running on the backup that will vary it's return between 0 and 1 on an interval (once a week, once a month, whatever). Upon returning 0, the priority is raised above that of the master, upon returning 1 the priority is lowered again. This way they trade places on the configured interval. The question: What can I do to tell the difference between a switch caused by my script, and a switch caused because one of the servers died? I certainly want to be notified when there is an actual problem, but not every time the servers change places because of the script. I see that version 1.2.7 has snmp support and I may be able to use it to get some information that could tell me one way or another, but to be honest I've never used snmp before and I don't know how to get the information I want with it (my Google foo failed me).

  Read the article

• Best way to restrict access to a folder in Dropbox

  - by Joe S

  I currently run a business with around 10 staff members and we currently use Dropbox Pro 100GB to share all of our files. It works very well and is inexpensive, however, I am taking on a number of new staff and would like to move the more sensitive documents into their own, protected folder. Currently, we all share one Dropbox account, I am aware that Dropbox for teams supports this, but it is far too expensive for us as a small company. I have researched a number of solutions: 1) Set up a new standard Dropbox account just for use by management, which will contain all of the sensitive documents, and join the shared folder of the rest of my team to access the rest of the documents. As i understand it, this is not possible with a free account, as any dropbox shared folder added to your account will use up your quota 2) Set up some sort of TrueCrypt container, and install TrueCrypt on each trusted staff member's machine, and store the documents inside that. Would this be difficult to use? I'd imagine the sync-ing would not work so well as the disk would technically be mounted at the time of use and any changes would be a change to the actual container rather than individual files. I was just wondering if anyone knows a way to do this without the drawbacks outlined above? Thanks!

  Read the article

• Installed Memory (RAM): 8GB (4GB Useable)

  - by Mike Bannister

  I have 4X 2GB RAM sticks installed, Windows 7 Ultimate x64 shows "Installed Memory (RAM): 8GB (4GB Useable)" in the system information. The motherboard says it supports up to 16GB of memory. I had Windows XP x64 and I'm pretty sure it was able to use all 8Gigs of memory. I've just formatted and am not burning through 4GB for sure. *The BIOS only show 4096MB while booting. I was only able to find one option relating to memory mapping and it took it from 4Gigs to 3 and change. CPU-Z shows all 4 sticks as 2048MB I went in to msconfig and checked the limits, they are not set. I tried resetting the CPU and RAM sticks 3 times, the CPU has no pins to be bent (flat contacts, I5) I rearranged all the RAM. I have separate video memory from the system memory. I have a 64 bit OS (I am 100% certain) Hardware: Memory: Four Corsair XMS3 TW3X4G1333C9AG Motherboard: Asus P7P55D Pro CPU: Intel Core i5-760 BX80605I5760 Graphics: Two ZOTAC ZT-50401-10L GeForce GTX 550 Ti If anyone has new ideas or knows the exact setting in the bios, it would be greatly appreciated.

  Read the article

• Are these hardwares compatible?

  - by Tom Kaufmann

  I am trying to upgrade my new machine but I want to do it myself. This is my 1st attempt at building system. After carefully reading reviewing feedback and my budget I have decided to select the below listed components. Can anybody let me know are they compatible or not? Transcend 64 GB 2.5" SATA Solid State Drive Asus GeForce GTX550 1GB DDR5 ENGTX550 TI DI/1GD5 Graphics Card Seagate Barracuda 1 TB HDD Internal Hard Drive Cooler Master eXtreme Power Pro 600 Power Supply Intel Core i5 2500K Sandy Bridge 3.30 GHz 95 W 4 Core Desktop Processor Intel DX79TO Motherboard Corsair CMZ8GX3M2A1600C9 8 GB DDR3 SDRAM 1600 MHz Dual Channel Kit Desktop Memory Sony AD-7260S-ZS Internal DVD Writer - Black Cooler Master Hyper TX3 EVO Intel CPU Cooler Cooler Master Elite 335U Cabinet LG E2051T 20.1 Inch SuperSlim Monitor Is any of these hardware components incompatible with I5 2500K? If you have any other suggestions for selecting any other harwdware that can boost up my performance or lower my cost while having the same performance, please suggest. But my primary questions is whether they are compatible or not! Any help is appreciated. Thank you.

  Read the article

• Constant crashes in windows 7 64bit when playing games

  - by yx.

  I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

  Read the article

< Previous Page | 542 543 544 545 546 547 548 549 550 551 552 553  | Next Page >