Search Results

Search found 18424 results on 737 pages for 'load balance'.

Page 547/737 | < Previous Page | 543 544 545 546 547 548 549 550 551 552 553 554  | Next Page >

• Ivy bridge i3 recognized as Xeon e3-1200

  - by user287072

  The situation: I've got a Ivy bridge i3 3225 which is being recognized as a Xeon e3-1200 series cpu by Ubuntu 14.04 64bit. The problem: cpu fan makes more noise than necessary (under dual-boot Win8 the fans are off), cannot install the intel graphics drivers from 01.org. Goals: - find a fix for the load fans could be they are not CPU related, I've tried some fan controller packages, but they made no difference. - get the intel graphics to install (this now fails as xeon cpu's are not supported, I got the package working on a i5 laptop) - get to know some more about how hardware recognition works Tried so far: - a reinstall of Ubuntu, but it was recognized again as a Xeon cpu. - different fan control packages, but they either do not recognized the fans, or just keep fan speed to high. Any pointers as how to get Ubuntu recognized it are more than welcome. lspci -nnQ 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) 00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK106 [GeForce GTX 660] [10de:11c0] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GK106 HDMI Audio Controller [10de:0e0b] (rev a1) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09) 04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 03)

  Read the article

• Using the @ in SQL Azure Connections

  - by BuckWoody

  The other day I was working with a client on an application they were changing to a hybrid architecture – some data on-premise and other data in SQL Azure and Windows Azure Blob storage. I had them make a couple of corrections - the first was that all communications to SQL Azure need to be encrypted. It’s a simple addition to the connection string, depending on the library you use. Which brought up another interesting point. They had been using something that looked like this, using the .NET provider: Server=tcp:[serverName].database.windows.net;Database=myDataBase; User ID=LoginName;Password=myPassword; Trusted_Connection=False;Encrypt=True; This includes most of the formatting needed for SQL Azure. It specifies TCP as the transport mechanism, the database name is included, Trusted_Connection is off, and encryption is on. But it needed one more change: Server=tcp:[serverName].database.windows.net;Database=myDataBase; User ID=[LoginName]@[serverName];Password=myPassword; Trusted_Connection=False;Encrypt=True; Notice the difference? It’s the User ID parameter. It includes the @ symbol and the name of the server – not the whole DNS name, just the server name itself. The developers were a bit surprised, since it had been working with the first format that just used the user name. Why did both work, and why is one better than the other? It has to do with the connection library you use. For most libraries, the user name is enough. But for some libraries (subject to change so I don’t list them here) the server name parameter isn’t sent in the way the load balancer understands, so you need to include the server name right in the login, so the system can parse it correctly. Keep in mind, the string limit for that is 128 characters – so take the @ symbol and the server name into consideration for user names. The user connection info is detailed here: http://msdn.microsoft.com/en-us/library/ee336268.aspx Upshot? Include the @servername on your connection string just to be safe. And plan for that extra space…  

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• Unity Dash and top toolbar won't open after updating to 12.10

  - by pgrytdal

  Today, I updated to Ubuntu 12.10. After re-starting, like the updater suggested, the toolbar on the top of the screen, and the dash won't load. I seem to be missing other features, as well, like alttab to switch windows, etc. I am able to access the Terminal, by typing CtrlAltT, which is how I was bale to access Firefox. How do I fix this problem? Edit: 2:10 PM on 10/19/12 As Chris Carter suggested, I'm including the results of the teminal command lspci (Sorry... I dont know how to format between Back-tics): 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Acer Incorporated [ALI] AMD RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Unable to configure/setup 5.1 audio with 12.04

  - by Vipin Vinayan

  I am kinda new to Ubuntu as well. I have been having this issue with audio for quite sometime now. Initially, when I installed version 11.10 (I guess), I was able to use my 5.1 speakers without any issues. If my memory serves me right, it was after an update that the 5.1 audio stopped working and the video resolution would not get saved. I temporarily fixed the resolution issue by creating a start-up shell script that would update the resolution and load it. But the issue with audio has been going on for quite sometime now. Even though I have option for 5.1, only two speakers seem to be working. I thought an upgrade should fix the issue and so upgraded the OS to version 12.04. I also tried uninstalling alsa and pulse audio, reinstalling them, changing the /etc/pulse/daemon.conf channels from 2 to 6. I have also tried installing pavucontrol but nothing seems to have worked and the issue still persists. Is there anything else you could suggest? The lspci log on my computer is as follows 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Would really appreciate a response that will assist me in resolving my issue. Thanks in advance Vipin

  Read the article

• At $20/month Windows Azure host my website with 99.97% uptime

  - by Gopinath

  Couple of years ago a reliable and decent performing Windows hosting was not affordable to many enthusiastic developers who want to try a startup idea or build a hobby site. I tried to start an ASP.NET website few years ago to provide services like – Mobile Tracing, Vehicle Tracing. But due to high cost of Windows hosting I developed those services using PHP (not an easy task for .NET developer) and hosted on them Linux servers.  But with recent evolution of Windows Azure, hosting ASP.NET websites on highly reliable servers is affordable. Today anyone can host a high responsive and available ASP.NET website for just $20/month using Windows Azure. My website coziie.com is running on Windows Azure and serves close to quarter millions visitors a month with 99.97% of uptime and most of the page load times are less than 3 seconds. All I spend to run this website is just around $20, if you translate it to India rupees its roughly Rs.1000. The web sever of coziie.com is powered by a single Extra Small Web role instance and the backend is powered by a SQL Azure instance. Azure is quite impressive to provide 99.97% of uptime. Response times during peak are around 3 seconds and on nomarl loads it is around 1.5 seconds. Here is the report of uptime provided by Royal Pingdom over last one year For just $20/month Windows Azure takes care of the following apart from hosting Patches up Windows OS to the latest version Upgrades ASP.NET to the latest version – coziie.com is running on ASP.NET MVC 3 and soon I’ll upgrade it to ASP.NET MVC 4 Hosts data on latest and best version Sql Server database SQL Azure maintains 3 copies of database and automatically recovers in case of server failures and disasters. I never worry about database backups/restore. Provides staging environment for deploying applications for testing purpose and move them to production – I upgrade  twice a month on average With Windows Azure I no longer focus on server maintenance or data backups. They are taken up by Microsoft team and I just focus on building my website. Wish there is a low cost Linux version of Windows Azure so that I can stop worrying about server maintenance of this blog!! If you are looking for a Windows hosting, look no further than Windows Azure. If you find $20/month is a bit expensive to start with you may explore Azure Website (sort of shared hosted environment) which is free to start with and as your traffic grows you can move to paid hosting.

  Read the article

• Are there any concerns with using a static read-only unit of work so that it behaves like a cache?

  - by Rowan Freeman

  Related question: How do I cache data that rarely changes? I'm making an ASP.NET MVC4 application. On every request the security details about the user will need to be checked with the area/controller/action that they are accessing to see if they are allowed to view it. The security information is stored in the database. For example: User Permission UserPermission Action ActionPermission A "Permission" is a token that is applied to an MVC action to indicate that the token is required in order to access the action. Once a user is given the permission (via the UserPermission table) then they have the token and can therefore access the action. I've been looking in to how to cache this data (since it rarely changes) so that I'm only querying in-memory data and not hitting a database (which is a considerable performance hit at the moment). I've tried storing things in lists, using a caching provider but I either run in to problems or performance doesn't improve. One problem that I constantly run in to is that I'm using lazy loading and dynamic proxies with EntityFramework. This means that even if I ToList() everything and store them somewhere static, the relationships are never populated. For example, User.Permissions is an ICollection but it's always null. I don't want to Include() everything because I'm trying to keep things simple and generic (and easy to modify). One thing I know is that an EntityFramework DbContext is a unit of work that acts with 1st-level caching. That is, for the duration of the unit of work, everything that is accessed is cached in memory. I want to create a read-only DbContext that will exist indefinitely and will only be used to read about permission data. Upon testing this it worked perfectly; my page load times went from 200ms+ to 20ms. I can easily force the data to refresh at certain intervals or simply leave it to refresh when the application pool is recycled. Basically it will behave like a cache. Note that the rest of the application will interact with other contexts that exist per request as normal. Is there any disadvantage to this approach? Could I be doing something different?

  Read the article

• Can't install alternate CD from USB?

  - by mattias

  Hi im trying to install ubuntu 12.04 with full hard disk encryption. After downloading and installing the Ubuntu live CD, I learned that truecrypt doesnt support full disk encryption on linux. I also learned that the best way to get "nearly full disk encryption" on ubuntu is by installing it from the alternate install CD. I tried that, but something is wrong with my CD reader/burner so it doesnt boot up when i insert the cd. My thought here was to take the .iso that I downloaded on my unencrypted Ubuntu system, use Unetbootin to make the usb drive. The usb drive used for this is exactly the same brand as one that I know has worked with a previous ubuntu live system on the same computer. I also used unetbootin for that usb, but I created it from windows that time. The usb stick boots up fine and i get through the first couple of steps in the installation process. However, After a while I get a "box" with the following error message "Load Installer components from CD" There was a problem reading data from the CD-ROM. Please make sure it is in the drive. If retrying does not work, you should check the integrity of your CD-ROM. "Failed to copy file from CD-ROM. Retry? " Then I cant get any further. I googled a lot and found this page which seems to tackle this very problem: http://www.dotkam.com/2010/11/29/ins...mage-from-usb/ I tried to do what it said. After pressing TAB, I wrote : cdrom-detect/try-usb=true without quotes because that's what i think is right. When I press TAB, there already is a text saying : /ubnkern initrd=/ubninit vga=788 -- quiet which can be removed. I have tried to both delete the text before the "--" and just inserting cdrom-detect/try-usb=true before it. Any idea of what can be wrong? I would like to do a full system encryption, or as full as it is possible. I dont want to just encrypt my /home folder. Maybe this isn't the easiest way. I use SanDisk usb sticks. I know there is a problem with U3 launcher on some SanDisks, but I never had to remove U3 before from similar disks, and the alternate install does boot up, so I dont think using U3 removal would help me. Any help or indication to an easier way to do this would be appreciated

  Read the article

• Inline template efficiency

  - by Darryl Gove

  I like inline templates, and use them quite extensively. Whenever I write code with them I'm always careful to check the disassembly to see that the resulting output is efficient. Here's a potential cause of inefficiency. Suppose we want to use the mis-named Leading Zero Detect (LZD) instruction on T4 (this instruction does a count of the number of leading zero bits in an integer register - so it should really be called leading zero count). So we put together an inline template called lzd.il looking like: .inline lzd lzd %o0,%o0 .end And we throw together some code that uses it: int lzd(int); int a; int c=0; int main() { for(a=0; a<1000; a++) { c=lzd(c); } return 0; } We compile the code with some amount of optimisation, and look at the resulting code: $ cc -O -xtarget=T4 -S lzd.c lzd.il $ more lzd.s .L77000018: /* 0x001c 11 */ lzd %o0,%o0 /* 0x0020 9 */ ld [%i1],%i3 /* 0x0024 11 */ st %o0,[%i2] /* 0x0028 9 */ add %i3,1,%i0 /* 0x002c */ cmp %i0,999 /* 0x0030 */ ble,pt %icc,.L77000018 /* 0x0034 */ st %i0,[%i1] What is surprising is that we're seeing a number of loads and stores in the code. Everything could be held in registers, so why is this happening? The problem is that the code is only inlined at the code generation stage - when the actual instructions are generated. Earlier compiler phases see a function call. The called functions can do all kinds of nastiness to global variables (like 'a' in this code) so we need to load them from memory after the function call, and store them to memory before the function call. Fortunately we can use a #pragma directive to tell the compiler that the routine lzd() has no side effects - meaning that it does not read or write to memory. The directive to do that is #pragma no_side_effect(<routine name), and it needs to be placed after the declaration of the function. The new code looks like: int lzd(int); #pragma no_side_effect(lzd) int a; int c=0; int main() { for(a=0; a<1000; a++) { c=lzd(c); } return 0; } Now the loop looks much neater: /* 0x0014 10 */ add %i1,1,%i1 ! 11 ! { ! 12 ! c=lzd(c); /* 0x0018 12 */ lzd %o0,%o0 /* 0x001c 10 */ cmp %i1,999 /* 0x0020 */ ble,pt %icc,.L77000018 /* 0x0024 */ nop

  Read the article

• Image loaded from TGA texture isn't displayed correctly

  - by Ramy Al Zuhouri

  I have a TGA texture containing this image: The texture is 256x256. So I'm trying to load it and map it to a cube: #import <OpenGL/OpenGL.h> #import <GLUT/GLUT.h> #import <stdlib.h> #import <stdio.h> #import <assert.h> GLuint width=640, height=480; GLuint texture; const char* const filename= "/Users/ramy/Documents/C/OpenGL/Test/Test/texture.tga"; void init() { // Initialization glEnable(GL_DEPTH_TEST); glViewport(-500, -500, 1000, 1000); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45, width/(float)height, 1, 1000); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); gluLookAt(0, 0, -100, 0, 0, 0, 0, 1, 0); // Texture char bitmap[256][256][3]; FILE* fp=fopen(filename, "r"); assert(fp); assert(fread(bitmap, 3*sizeof(char), 256*256, fp) == 256*256); fclose(fp); glGenTextures(1, &texture); glBindTexture(GL_TEXTURE_2D, texture); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, 256, 256, 0, GL_RGB, GL_UNSIGNED_BYTE, bitmap); } void display() { glClearColor(0, 0, 0, 0); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glEnable(GL_TEXTURE_2D); glBindTexture(GL_TEXTURE_2D, texture); glColor3ub(255, 255, 255); glBegin(GL_QUADS); glVertex3f(0, 0, 0); glTexCoord2f(0.0, 0.0); glVertex3f(40, 0, 0); glTexCoord2f(0.0, 1.0); glVertex3f(40, 40, 0); glTexCoord2f(1.0, 1.0); glVertex3f(0, 40, 0); glTexCoord2f(1.0, 0.0); glEnd(); glDisable(GL_TEXTURE_2D); glutSwapBuffers(); } int main(int argc, char** argv) { glutInit(&argc, argv); glutInitDisplayMode(GLUT_RGB | GLUT_DEPTH | GLUT_DOUBLE); glutInitWindowPosition(100, 100); glutInitWindowSize(width, height); glutCreateWindow(argv[0]); glutDisplayFunc(display); init(); glutMainLoop(); return 0; } But this is what I get when the window loads: So just half of the image is correctly displayed, and also with different colors.Then if I resize the window I get this: Magically the image seems to fix itself, even if the colors are wrong.Why?

  Read the article

• How are Reads Distributed in a Workload

  - by Bill Graziano

  People have uploaded nearly one millions rows of trace data to TraceTune.  That’s enough data to start to look at the results in aggregate.  The first thing I want to look at is logical reads.  This is the easiest metric to identify and fix. When you upload a trace, I rank each statement based on the total number of logical reads.  I also calculate each statement’s percentage of the total logical reads.  I do the same thing for CPU, duration and logical writes.  When you view a statement you can see all the details like this: This single statement consumed 61.4% of the total logical reads on the system while we were tracing it.  I also wanted to see the distribution of reads across statements.  That graph looks like this: On average, the highest ranked statement consumed just under 50% of the reads on the system.  When I tune a system, I’m usually starting in one of two modes: this “piece” is slow or the whole system is slow.  If a given piece (screen, report, query, etc.) is slow you can usually find the specific statements behind it and tune it.  You can make that individual piece faster but you may not affect the whole system. When you’re trying to speed up an entire server you need to identity those queries that are using the most disk resources in aggregate.  Fixing those will make them faster and it will leave more disk throughput for the rest of the queries. Here are some of the things I’ve learned querying this data: The highest ranked query averages just under 50% of the total reads on the system. The top 3 ranked queries average 73% of the total reads on the system. The top 10 ranked queries average 91% of the total reads on the system. Remember these are averages across all the traces that have been uploaded.  And I’m guessing that people mainly upload traces where there are performance problems so your mileage may vary. I also learned that slow queries aren’t the problem.  Before I wrote ClearTrace I used to identify queries by filtering on high logical reads using Profiler.  That picked out individual queries but those rarely ran often enough to put a large load on the system. If you look at the execution count by rank you’d see that the highest ranked queries also have the highest execution counts.  The graph would look very similar to the one above but flatter.  These queries don’t look that bad individually but run so often that they hog the disk capacity. The take away from all this is that you really should be tuning the top 10 queries if you want to make your system faster.  Tuning individually slow queries will help those specific queries but won’t have much impact on the system as a whole.

  Read the article

• New ZFS Encryption features in Solaris 11.1

  - by darrenm

  Solaris 11.1 brings a few small but significant improvements to ZFS dataset encryption.  There is a new readonly property 'keychangedate' that shows that date and time of the last wrapping key change (basically the last time 'zfs key -c' was run on the dataset), this is similar to the 'rekeydate' property that shows the last time we added a new data encryption key. $ zfs get creation,keychangedate,rekeydate rpool/export/home/bob NAME PROPERTY VALUE SOURCE rpool/export/home/bob creation Mon Mar 21 11:05 2011 - rpool/export/home/bob keychangedate Fri Oct 26 11:50 2012 local rpool/export/home/bob rekeydate Tue Oct 30 9:53 2012 local The above example shows that we have changed both the wrapping key and added new data encryption keys since the filesystem was initially created.  If we haven't changed a wrapping key then it will be the same as the creation date.  It should be obvious but for filesystems that were created prior to Solaris 11.1 we don't have this data so it will be displayed as '-' instead. Another change that I made was to relax the restriction that the size of the wrapping key needed to match the size of the data encryption key (ie the size given in the encryption property).  In Solaris 11 Express and Solaris 11 if you set encryption=aes-256-ccm we required that the wrapping key be 256 bits in length.  This restriction was unnecessary and made it impossible to select encryption property values with key lengths 128 and 192 when the wrapping key was stored in the Oracle Key Manager.  This is because currently the Oracle Key Manager stores AES 256 bit keys only.  Now with Solaris 11.1 this restriciton has been removed. There is still one case were the wrapping key size and data encryption key size will always match and that is where they keysource property sets the format to be 'passphrase', since this is a key generated internally to libzfs and to preseve compatibility on upgrade from older releases the code will always generate a wrapping key (using PKCS#5 PBKDF2 as before) that matches the key length size of the encryption property. The pam_zfs_key module has been updated so that it allows you to specify encryption=off. There were also some bugs fixed including not attempting to load keys for datasets that are delegated to zones and some other fixes to error paths to ensure that we could support Zones On Shared Storage where all the datasets in the ZFS pool were encrypted that I discussed in my previous blog entry. If there are features you would like to see for ZFS encryption please let me know (direct email or comments on this blog are fine, or if you have a support contract having your support rep log an enhancement request).

  Read the article

• Criteria for selecting timeout value?

  - by stijn

  Situation: a piece of software reads frames of data from a file in a seperate thread and puts it on a queue, emptied by another thread. That second thread periodically checks on the queue and fails rather gracefully, by showing an error message stating the read timed out, if no data is available within a certain amount of time. Initially this timeout was set to 200mSec. There was no real reasoning behind that constant though, but it worked fine. We measured on a couple of machines and for large data frames, larger than what would be used by customers, a read took like 20mSec whith no other load on the machine. However one customer now gets timeout errors now and then (on the second try all is fine, probably the file is in cache or the virus scanner leaves it alone). The programmers are like 'well, yeah, but that customer's machine is full of cruft, virus scanners, tons of unneeded background processes etc'. Of course the customer is like 'hey this should just work, shouldn't it'? While the programers have a point, since the software is heavy enough to validate the need for a dedicated machine, that does not make the customer happy. Increasing the timeout to 2 seconds, for example, solves the problem. But I'd like to make a proper decision now instead of just randomly pick some magic constant that is probably ok in 99% of cases. What criteria should be used for that? We could just pick a large number, but that feels wrong. (and then we end up with a program that has the horrible bahaviour of hanging when trying to read from a disconnected drive for instance, whereas we'd rather make it show an error right away). Or we could make the timeout value a user setting, but then we need to ducument it clearly and even then not all customers are tech savy enough to really understand what it does. Or we could try and wait until another customer reports timeouts and increase the value again. And again. Until we find something ok for 99.99% of the cases.. Any good practice for this type of situation?

  Read the article

• Oracle GoldenGate 11gR2 Event Marker System

  - by Doug Reid

  0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Oracle GoldenGate 11gR2 includes a number of refinements to the Event Marker system. Using event markers enables GoldenGate processes to take a defined action based on an event in the data stream. This feature within Oracle GoldenGate simplifies methods to embed specific custom processing in the areas of error handling, alerts, and notification. The event marker system effectively allows for DML driven workflows to be created within GoldenGate and enables customers to craft non-standard processing based on special events. There are a number of supported event actions including: trace, log, checkpoint before, suspend, abort, and several others. With 11gR1 events can now be triggered by DDL operations, plus variables can be passed in and out of the system to shell scripts. Some good use cases for this feature are Automatic switchover to the secondary system during planned outages Better monitoring over source systems’ performance and automated switchover to the standby system in case of an outage with the primary system Automatic switchover from initial load to changed data movement Automatic synchronization of any type of batch processing taking place on both the source and target databases for database consistency Automatic stoppage of the Delivery module to allow end-of-day reporting Finding, tracking, and reporting on transactions that are of interest including the ones that do not have primary keys or transaction record numbers If you would like to see a demo, please visit our youtube channel (http://youtube.com/oraclegoldengate)  To learn more about the new features of Oracle GoldenGate 11gR2 and to ask questions to the PM team, please join us on September 12th  8am or 10am PST for our live webcast. Click here to register.

  Read the article

• How do I set image position in conky

  - by realitygenerator

  I copied and modified an existing .conkyrc file from the ubuntu forum and I'm trying to place the LinuxMint logo in a specific position Below are my conkyrc file and the screenshot # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type desktop own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont URW Gothic:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left #alignment top_right #alignment bottom_left #alignment bottom_right. alignment top_middle # Gap between borders of screen and text gap_x 10 gap_y 10 #Display temp in fahrenheit temperature_unit fahrenheit #Choose which screen on which to display # stuff after 'TEXT' will be formatted on screen TEXT $color ${color green}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine LinuxMint 11 "Katya" (Oneric) ${image ~/Conky/Logo_Linux_Mint.png -s 80x60 -f 86400} ${color green}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${hwmon temp 1} $cpubar ${cpugraph 000000 ffffff} NAME PID CPU% MEM% ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4} ${color green}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Root: ${fs_free_perc /}% ${fs_bar 6 /}$color hda1: ${fs_free_perc /media/sda1}% ${fs_bar 6 /media/sda1}$color ${color green}NETWORK (${addr eth1}) ${hr 2}$color Down: $color${downspeed eth1} k/s ${alignr}Up: ${upspeed eth1} k/s ${downspeedgraph eth1 25,140 000000 ff0000} ${alignr}${upspeedgraph eth1 25,140 000000 00ff00}$color Total: ${totaldown eth1} ${alignr}Total: ${totalup eth1} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color green}LOGGING ${hr 2}$color ${execi 30 tail -n3 /var/log/messages | awk '{print " ",$5,$6,$7,$8,$9,$10}' | fold -w50} ${color green}FORTUNE ${hr 2}$color ${execi 120 fortune -s | fold -w50} I want to put the mint logo right after the word (oneric). Any help would be greatly appreciated.

  Read the article

• C++ and SDL resource management for 2D game

  - by KuruptedMagi

  My first question is about stateManagers. I do not use the singleton pattern (read many random posts with various reasons not to use it), I have gameStateManager which runs the pointer cCurrentGameState-render(), etc. I want to make a transitioning game, this engine should ideally cover both a platformer and a bird's eye RPG (with some recoding, I just mean the base engine), both of which will load different levels and events, such as world map, dungeon, shops, etc. So I then thought, rather then having to store all this data within all the states, I would break the engine into gameStates, and playStates... when gameState reaches gameStatePlay(), gameStatePlay simply runs the usual handleInput, logic, and render for the playStates, just as the low level gameStateManager does. This lets me store all the player data within the base playstate class without storing useless data in the gameStates. Now I have added a seperate mapEditor, which uses editorStates from gameStateEditor. Is this too much usage of the gameState concept? It seems to work pretty well for me, so I was wondering if I am too far off a common implementation of this. My second question is on image resources. I have my sprite class with nothing but static members, mainly loadImage, applySurface, and my screen pointer. I also have a map pairing imageName enums with actual SDL_Surface pointers, and one pairing clipNumber enums with a wrapper class for a vector of clips, so that each reference in the map can have different amounts of clips with different sizes. I thought it would be better to store all these images, and screen within one static body, since 20 different goblins all use the same sprite sheet, and all need to print to the same screen, and of course, this way I do not need to pass my screen reference to every little entity. The imageMap seems to work very well, I can even add the ability to search through the map at creation of entity type to see if a particular image at creation, creating if it doesnt exist, and destroying the image if the last entity that needs it was just destroyed. The vectored clip map however, seems to take too long to initialize, so if i run past the state that initializes them to fast, the game crashes <. Plus, the clip map call is half of this line =P SPRITE::applySurface( cEditorMap.cTiles[x][y].iX, cEditorMap.cTiles[x][y].iY, SPRITE::mImages[ IMAGE_TILEMAP ], SPRITE::screen, SPRITE::mImageClips[IMAGE_TILEMAP]->clips.at( cEditorMap.cTiles[x][y].iTileType ) ); Again, do I have the right idea? I like the imageMap, but am I better off with each entity storing its own clips? My last question is about collision detection. I only grasp the basics, will look at per-pixel and circular soon, but how can I determine which side the collision comes from with just the basic square collision detection, I tried breaking each entity into 4 collision zones, but that just gave me problems with walking through walls and the like <. Also, is per-pixel color collision a good way to decide what collision just occured, or is checking multiple colors for multiple entities too taxing each cycle?

  Read the article

• Creating Corporate Windows Phone Applications

  - by Tim Murphy

  Most developers write Windows Phone applications for their own gratification and their own wallets.  While most of the time I would put myself in the same camp, I am also a consultant.  This means that I have corporate clients who want corporate solutions.  I recently got a request for a system rebuild that includes a Windows Phone component.  This brought up the questions of what are the important aspects to consider when building for this situation. Let’s break it down in to the points that are important to a company using a mobile application.  The company want to make sure that their proprietary software is safe from use by unauthorized users.  They also want to make sure that the data is secure on the device. The first point is a challenge.  There is no such thing as true private distribution in the Windows Phone ecosystem at this time.  What is available is the ability to specify you application for targeted distribution.  Even with targeted distribution you can’t ensure that only individuals within your organization will be able to load you application.  Because of this I am taking two additional steps.  The first is to register the phone’s DeviceUniqueId within your system.  Add a system sign-in and that should cover access to your application. The second half of the problem is securing the data on the phone.  This is where the ProtectedData API within the System.Security.Cryptography namespace comes in.  It allows you to encrypt your data before pushing it to isolated storage on the device. With the announcement of Windows Phone 8 coming this fall, many of these points will have different solutions.  Private signing and distribution of applications will be available.  We will also have native access to BitLocker.  When you combine these capabilities enterprise application development for Windows Phone will be much simpler.  Until then work with the above suggestions to develop your enterprise solutions. del.icio.us Tags: Windows Phone 7,Windows Phone,Corporate Deployment,Software Design,Mango,Targeted Applications,ProtectedData API,Windows Phone 8

  Read the article

• Need help on a problemset in a programming contest

  - by topher

  I've attended a local programming contest on my country. The name of the contest is "ACM-ICPC Indonesia National Contest 2013". The contest has ended on 2013-10-13 15:00:00 (GMT +7) and I am still curious about one of the problems. You can find the original version of the problem here. Brief Problem Explanation: There are a set of "jobs" (tasks) that should be performed on several "servers" (computers). Each job should be executed strictly from start time Si to end time Ei Each server can only perform one task at a time. (The complicated thing goes here) It takes some time for a server to switch from one job to another. If a server finishes job Jx, then to start job Jy it will need an intermission time Tx,y after job Jx completes. This is the time required by the server to clean up job Jx and load job Jy. In other word, job Jy can be run after job Jx if and only if Ex + Tx,y = Sy. The problem is to compute the minimum number of servers needed to do all jobs. Example: For example, let there be 3 jobs S(1) = 3 and E(1) = 6 S(2) = 10 and E(2) = 15 S(3) = 16 and E(3) = 20 T(1,2) = 2, T(1,3) = 5 T(2,1) = 0, T(2,3) = 3 T(3,1) = 0, T(3,2) = 0 In this example, we need 2 servers: Server 1: J(1), J(2) Server 2: J(3) Sample Input: Short explanation: The first 3 is the number of test cases, following by number of jobs (the second 3 means that there are 3 jobs for case 1), then followed by Ei and Si, then the T matrix (sized equal with number of jobs). 3 3 3 6 10 15 16 20 0 2 5 0 0 3 0 0 0 4 8 10 4 7 12 15 1 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 8 10 4 7 12 15 1 4 0 50 50 50 50 0 50 50 50 50 0 50 50 50 50 0 Sample Output: Case #1: 2 Case #2: 1 Case #3: 4 Personal Comments: The time required can be represented as a graph matrix, so I'm supposing this as a directed acyclic graph problem. Methods I tried so far is brute force and greedy, but got Wrong Answer. (Unfortunately I don't have my code anymore) Could probably solved by dynamic programming too, but I'm not sure. I really have no clear idea on how to solve this problem. So a simple hint or insight will be very helpful to me.

  Read the article

• Small hiccup with VMware Player after upgrading to Ubuntu 12.04

  The upgrade process Finally, it was time to upgrade to a new LTS version of Ubuntu - 12.04 aka Precise Pangolin. I scheduled the weekend for this task and despite the nickname of Mauritius (Cyber Island) it took roughly 6 hours to download nearly 2.400 packages. No problem in general, as I have spare machines to work on, and it was weekend anyway. All went very smooth and only a few packages required manual attention due to local modifications in the configuration. With the new kernel 3.2.0-24 it was necessary to reboot the system and compared to the last upgrade, I got my graphical login as expected. Compilation of VMware Player 4.x fails A quick test on the installed applications, Firefox, Thunderbird, Chromium, Skype, CrossOver, etc. reveils that everything is fine in general. Firing up VMware Player displays the known kernel mod dialog that requires to compile the modules for the newly booted kernel. Usually, this isn't a big issue but this time I was confronted with the situation that vmnet didn't compile as expected ("Failed to compile module vmnet"). Luckily, this issue is already well-known, even though with "Failed to compile module vmmon" as general reason but nevertheless it was very easy and quick to find the solution to this problem. In VMware Communities there are several forum threads related to this topic and VMware provides the necessary patch file for Workstation 8.0.2 and Player 4.0.2. In case that you are still on Workstation 7.x or Player 3.x there is another patch file available. After download extract the file like so: tar -xzvf vmware802fixlinux320.tar.gz and run the patch script as super-user: sudo ./patch-modules_3.2.0.sh This will alter the existing installation and source files of VMware Player on your machine. As last step, which isn't described in many other resources, you have to restart the vmware service, or for the heart-fainted, just reboot your system: sudo service vmware restart This will load the newly created kernel modules into your userspace, and after that VMware Player will start as usual. Summary Upgrading any derivate of Ubuntu, in my case Xubuntu, is quick and easy done but it might hold some surprises from time to time. Nonetheless, it is absolutely worthy to go for it. Currently, this patch for VMware is the only obstacle I had to face so far and my system feels and looks better than before. Happy upgrade! Resources I used the following links based on Google search results: http://communities.vmware.com/message/1902218#1902218http://weltall.heliohost.org/wordpress/2012/01/26/vmware-workstation-8-0-2-player-4-0-2-fix-for-linux-kernel-3-2-and-3-3/ Update on VMware Player 4.0.3 Please continue to read on my follow-up article in case that you upgraded either VMware Workstation 8.0.3 or VMware Player 4.0.3.

  Read the article

• Combobox binding with different types

  - by George Evjen

  Binding to comboboxes in Silverlight has been an adventure the past couple of days. In our framework at ArchitectNow we use LookupGroups and LookupValues. In our database we would have a LookupGroup of NBA Teams for example. The group would be called NBATeams, we get the LookupGroupID and then get the values from the LookupValues table. So we would end up with a list of all 30+ teams. Our lookup values entity has a display text(string), value(string), IsActive and some other fields. With our applications we load all this information into the system when the user is logging in or right after they login. So in cache we have a list of groups and values that we can get at whenever we want to. We get this information in our framework simply by creating an observable collection of type LookupValue. To get a list of these values into our property all we have to do is. var NBATeams = AppContext.Current.LookupSerivce.GetLookupValues(“NBATeams”); Our combobox then is bound like this. (We use telerik components in most if not all our projects) <telerik:RadComboBox ItemsSource="{Binding NBATeams}”></telerik:RadComboBox> This should give you a list in your combobox. We also set up another property in our ViewModel that is a just single object of NBATeams  - “SelectedNBATeam” Our selectedItem in our combobox would look like, we would set this to a two way binding since we are sending data back. SelectedItem={Binding SelectedNBATeam, mode=TwoWay}” This is all pretty straight forward and we use this pattern throughout all our applications. What do you do though when you have a combobox in a ItemsControl or ListBox? Here we have a list of NBA Teams that are a string that are being brought back from the database. We cant have the selected item be our LookupValue because the data is a string and its being bound in an ItemsControl. In the example above we would just have the combobox in a form. Here though we have it in a ItemsControl, where there is no selected item from the initial ItemsSource. In order to get the selected item to be displayed in the combobox you have to convert the LookupValue to a string. Then instead of using SelectedItem in the combobox use SelectedValue. To convert the LookupValue we do this. Create an observable collection of strings public ObservableCollection<string> NBATeams { get; set;} Then convert your lookups to strings var NBATeams = new ObservableCollection<string>(AppContext.Current.LookupService.GetLookupValues(“NBATeams”).Select(x => x.DisplayText)); This will give us a list of strings and our selected value should be bound to the NBATeams property in our ItemsSource in our ItemsControl. SelectedValue={Binding NBATeam, mode=TwoWay}”

  Read the article

• 5.1 surround sound

  - by rocker9455

  Ok, So i've always had trouble with enabling 5.1 in ubuntu. Running 'alsamixer': I have: Master, Heaphones, PCM, Front, Front Mi, Front Mi, Surround, Center All are at 100% Card:HDA Intel Chip:Realtek ALC888 (This is my onboard sound, Its a dell studio, with 7.1 integrated sound) Running "speaker-test -c6 -twav" I only get the front 2 speakers (Right/Left) making any noise. The others make no noise at all. I have no other sound card to use as all my PCI slots are used up. Daemon.conf: ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10

  Read the article

• What is the best way to implement collision detection using Bullet physics engine and a track generated from a curve?

  - by tigrou

  I am developing a small racing game were the track is generated from a curve. As said above, the track is generated, but not infinite. The track of one level could fit with no problem in memory and will contain a reasonably small amount of triangles. For collisions, I would like to use Bullet physics engine and know what is the best way to handle collisions with the track efficiently. NOTE : The track will be stored as a static rigid body (mass = 0). The player will be represented by a sphere shape for collisions. Here is some possibilities i have in mind : Create one rigid body, then, put all triangles of the track (except non collidable stuff) into it. Result : 1 body with many triangles (eg : 30000 triangles) Split the track into several sections (eg: 10 sections). Then, for each section, create a rigid body and put corresponding triangles in it. Result : small amount of bodies with relatively small amount of triangles (eg : 1500 triangles per section). Split the track into many sub-sections (eg : 1200 sections). Here one subsection = very small step when generating the curve. Again for each sub-section, create a body and put triangles in it. Result : many bodies with very small amount of triangles (eg : 20 triangles). Advantage : it could be possible to "extra data" to each of the subsection, that could be used when handling collisions. Same as 2, but only put sections N and N+1 in physics engine (where N = current section where the player is). When player reach section N+1, unload section N and load section N+2 and so on... Issue : harder to implement, problems if the player suddenly "jump" from one section to another (eg : player fly away from section N, and fall on section N + 4 that was underneath : no collision handled, player will fall into void ) Same as 4, but with many sub-sections. Issues : since subsections are very small there will be constantly new bodies added and removed to physics engine at runtime. Possibilities for player to accidently skip some sections and fall into the void are higher than 4.

  Read the article

• Is my work on a developer test being taken advantage of?

  - by CodeWarrior

  I am looking for a job and have applied to a number of positions. One of them responded, I had a pretty lengthy phone interview (perhaps an hour +) and they then set me up with a developer test. I was told that this test is estimated to take between 6 and 8 hours and that, provided it met with their approval, I could be paid for my work on it. That gave me some pause, but I endeavored. The developer test took place on a VM accessed via RDP. The task was to implement a search page in a web project that requests data from the server, displays it on the screen in a table, has a pretty complicated search filtering scheme (there are about 15 statuses and when sending the search to the server you can search by these statuses) in addition to the string/field search. They want some SVG icons to change color on certain data values, they want some data to be represented differently than how it is in the database, etc. Loooong story short, this took one heck of a lot longer than 6-8 hours. Much of it was due to the very poor VM that I was running on (Visual Studio 2013 took 10 minutes to load, and another 15 minutes to open the 3 GB ginormous solution). After completing, I was told to commit my changes to source control... Hmm, OK. I get an email back that they thought that the SVGs could have their color changed differently, they found a bug in this edge-case, there was an occasional problem with this other thing that I never experienced, etc. So I am 13-14 hours into this thing now, and I have to do bug fixes. I do them, and they come back with some more. This is all apparently going into a production application. I noticed some anomalies in the code that was already in there where it looked like other people had coded all of one functionality and not anything else that I could find. Am I just being used for cheap labor? Even if they pay me the promised 50 dollars and hour for 6 hours, I have committed like 18 hours to this thing now. If I bug fix all of the stuff they keep coming up with, I will have worked at least 16 hours for free. I have taken a number of developer tests. I have never taken one where I worked on code that was destined for production. I have never taken one where I implemented a feature that was in the pipeline for development (it was planned for, and I implemented it through the course of the test). And I have never taken one that took 4 rounds and a total of 20+ hours. I get the impression that they are using their developer test to field some of the functionality, that they don't have time for in their normal team, on the cheap. Also, I wouldn't mind a 'devtest' tag.

  Read the article

• Oracle Linux Hands-on Lab from your Home? Yes You Can Do That!

  - by Zeynep Koch

  We're taking the very popular OTN Sysadmin Days and going virtual! We have two days to choose from: Americas - Tuesday January 15th, 2013 9:00 a.m – 1:00 p.m. PT / 12:00 p.m. – 4:00 p.m. ET / 1:00 p.m. - 5:00 p.m. BRT EMEA -  Tuesday January 29th, 2013 - 9:00 a.m – 13:00 p.m GMT / 10:00 a.m – 14:00 p,m CET / 12:00 p.m – 16:00 p.m AST / 13:00 p.m – 17:00 p,m MSK / 14:30 p.m – 18:30 p.m IST You'll be able to perform real-world tasks with Oracle Linux and if you have questions you can ask for help from the Oracle experts through chat window. There's one caveat: you'll have to do a little homework ahead of time. Load the virtual images onto your laptop, find the instructions, and make sure everything is working properly. This wiki https://wikis.oracle.com/display/virtualsysadminday/Home explains what you need to do. If you have questions, ask them as comments to the wiki:https://wikis.oracle.com/display/virtualsysadminday/Home.  Oracle Linux Track  1. Oracle Linux Technology Overview - In this session we will go over the latest Oracle Linux features including tools for Linux administration such as the Unbreakable Linux Network (ULN) and public yum. We will also show you a demo of Ksplice zero downtime kernel updates, only available to Oracle Linux customers. You will see how easy it is to switch from Red Hat support to Oracle Linux support by using ULN. Last but not least, we’ll introduce the 3 hands-on labs that will follow this session in the Linux track. 2. HOL: Package Management -  In this lab session you will use the package management on Oracle Linux using RPM and yum. Some of the tasks that you will experience include listing installed packages, obtaining additional information about packages, searching for packages and installing/updating them as well as verifying package integrity and removing software. We’ll also review Linux services and run levels, how to start and stop them, checking the status of a particular service and enabling a service to be started automatically at system boot. 3. HOL: Storage Management - In this hands-on lab session, you will learn about storage management with LVM2, the Linux Logical Volume Manager, preparing block devices, creating physical and logical volumes, creating file systems on top of logical volumes, and resizing file systems dynamically. You will also practice setting up software RAID devices, configuring encrypted block devices.Btrfs File System - In this hands-on lab session, we will introduce you to Btrfs file system. You will be able to create and mount a Btrfs file system and learn to setup a mirrored/striped file system across multiple block devices. You’ll also learn how to add and remove block devices, and create file system snapshots. Register for this FREE event.

  Read the article

• RTS Game Style Application [closed]

  - by Daniel Wynand van Wyk

  My question may seem somewhat odd, but I hope that my specifications will clarify EXACTLY what it is that I am after. I need some help choosing the right tooling for a particular endeavour. My background is in desktop application development and large back-end systems. I have worked primarily on the Microsoft stack using C# and the .Net framework. My goal is to develop a 2D, RTS style, interactive office simulation. The simulation will model various office spaces, office equipment, employees and their interactions with one another. The idea is to abstract the concept of an office completely. Under the hood the application will do many things that are nothing like a game. This includes P2P networking, VPN tunnelling, streaming video, instant messaging, document collaboration, remote screen sharing, file-sharing, virus scanning, VOIP, document scanning, faxing, emailing, distributed computing, content management and much more! A somewhat similar thing has been attempted by IBM, where they created a virtual office in second life. If their attempt was a game, the game-play would be notably horrible, to say the least! The users/players will drive and control my application through the various objects modelled in the simulation. A single application capable of performing all of these various tasks would be a nightmare to navigate for even the most expert user. Using the concept of a game, I can easily separate functionality by assigning them to objects that relate 1-1 with their real world counter-parts. This can greatly simplify computing for novice users, with many added benefits in terms of visibility, transparency of process and centralized configuration. My hope is to make complex computing tasks accessible to all kinds of users and to greatly reduce the cognitive load associated with using the many different utilities and applications inside office settings. The complexity is therefore limited to the complexity of the space in which you find yourself. I want the application to target as many platforms as possible and run on computers that have no accelerated graphics capabilities. The simulation won't contain any of the fancy eye-candy you find in modern games, to the contrary, my "game" will purposefully be clean and simple. The closest thing I could imagine would be an old game like "Theme Hospital" or the first instalment of "The Sims". All the content will be pre-created and not user-generated like Second Life. New functionality will be added via a plugin system. Given my background and nature of my "game", I would like to spend most of my time writing code that does not have to do with the simulated office, as the "game" is really just a glorified application menu. I have done much reading about existing engines, frameworks and tools. I need the help of an experienced game developer who has tried and tested various products over the years who can guide me in the right direction given my very particular needs. I would appreciate any help I can get!

  Read the article

< Previous Page | 543 544 545 546 547 548 549 550 551 552 553 554  | Next Page >