Search Results

Search found 17285 results on 692 pages for 'incremental build'.

Page 548/692 | < Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >

• Utility to LOGICALLY compare two xml files?

  - by Matthew

  Right now we are attempting to build golden configurations for our environment. One piece of software that we use relies on large XML files to contain the bulk of its configuration. We want tot ake our lab environment, catalog it as our "golden configuration" and then be able to audit against that configuration in the future. Since diff is bytewise comparison and NOT logical comparison, we can't use it to compare files in this case (XML is unordered, so it won't work). What I am looking for is something that can parse the two XML files, and compare them element by element. So far we have yet to find any utilities that can do this. OS doesn't matter, I can do it on anything where it will work. The preference is something off the shelf. Any ideas? Edit: One issue we have run into is one vendor's config files will occasionally mention the same element several times, each time with different attributes. Whatever diff utility we use would need to be able to identify either the set of attributes or identify them all as part of one element. Tall order :)

  Read the article

• Why do messenger keeps coming up when I adjust screen brightness?

  - by Asaf R

  My Dell Studio XPS 13 has a brightness up & down buttons (Fn + up arrow / down arrow), as do most laptops have. It's running Windows 7 64bit and I've installed Windows Live Messenger (build 14 and something) on it. When I hit Fn + down arrow, to reduce screen brightness, the Messenger window pops up. That's true whether it has been running in background (system tray / minimized) before or not. Note, to make messenger hide itself to the system tray, I've set it to Vista Compatibility mode. I don't think that has anything to do with it though, since if I shut compatibility mode off, the problem persists. There's a thread on the matter here, but with no solution. Thanks, Asaf SOLUTION: Stop Intellitype when using internal keyboard. See detailed howto here. EDIT: Some new findings on the matter - If I exit messenger entirely and restart (or simply stop) the service "Windows Live ID Sign-in Assistant" the problem is solved until I run messenger again. It persists even after entirely closing messenger, until I restart the said service. EDIT2: The above service "Windows Live ID Sign-in Assistant" actual name is wlidsvc. There's no shortcut defined for messenger, nor is there any other hot key in its preferences. EDIT3: I'm not sure if it's relates, but some of the Fn keys are not working - Fn + F1 doesn't put the machine to sleep, Fn + F3 doesn't show battery status. EDIT4: Problem probably relates to conflict with IntelliType Pro. See my answer below. Said conflict also causes Undo command when disabling Wireless (Wireless touch button), and other side effects for various keys.

  Read the article

• Problem installing SQLite3 RubyGem on Ubuntu

  - by misbehavens

  I am having a problem trying to install the SQLite3 RubyGem. Here's what I'm doing: $ sudo gem install --remote sqlite3-ruby Here's the output: Building native extensions. This could take a while... ERROR: Error installing sqlite3-ruby: ERROR: Failed to build gem native extension. /usr/bin/ruby1.8 extconf.rb checking for fdatasync() in -lrt... yes checking for sqlite3.h... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby1.8 --with-sqlite3-dir --without-sqlite3-dir --with-sqlite3-include --without-sqlite3-include=${sqlite3-dir}/include --with-sqlite3-lib --without-sqlite3-lib=${sqlite3-dir}/lib --with-rtlib --without-rtlib Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/sqlite3-ruby-1.2.5 for inspection. Results logged to /usr/lib/ruby/gems/1.8/gems/sqlite3-ruby-1.2.5/ext/sqlite3_api/gem_make.out

  Read the article

• What parts of a motherboard age, and how can I choose one with the longest possible life?

  - by Robert Harvey

  I have a home-built computer that's probably about four years old. I realize this probably seems ancient to some folks, but computers have no moving parts (except the fans), so theoretically they should last a long time, if I still have software to run on them. A few weeks ago, it began blue-screening and freezing up, with various error messages. It almost always happened about five minutes after startup. I assumed that the video card was overheating, since the cheap little fan on the heatsink died, so I replaced it. Long story short, after upgrading the video drivers a couple of times and performing some other troubleshooting, I remembered that the last time this happened, I took out the memory SIMS and cleaned the contacts with a gum eraser, so I did that again (noting that the SATA cables were very close to the chips on the SIMS). I re-routed the cables and reinstalled the SIMS. So far, so good; the machine has been trouble-free since. But blue-screens are distressing; I never know what bits are being chewed up in my OS installation when something like this happens. So I'm wondering if I'm choosing my components properly. If it matters, it's an Intel D915GAG motherboard and Corsair memory, but what I'm wondering is, should I be looking for certain characteristics when I choose these parts for my next computer, so that I can avoid this problem in my next build?

  Read the article

• Apache is running the wrong version of PHP.

  - by The Rook

  I am trying to enable CURL in php, and possibly update php as well. I have run into a road block where Apache seems to be running the wrong version of PHP. Here is some evidence. #lsof | grep php httpd 18397 nobody 135w REG 8,3 242 528537 /usr/local/apache/modules/libphp5.so I download the latest php 5.2.13 and build from source. I run a service httpd stop, do a make install and then I manually overwrite /usr/local/apache/modules/libphp5.so just to be safe. Using ldd i can see that its my fresh binary compiled with curl (the old one doesn't have curl.) ldd /usr/local/apache/modules/libphp5.so | grep curl libcurl.so.4 => /usr/local/lib/libcurl.so.4 (0x0064e000) I execute a phpinfo() and 5.2.3 is being executed instated of my new 5.2.13 and "curl" is nowhere to be found. What am I doing wrong? Why is curl disabled even though its statically linked? This is a RHEL 5.5 system.

  Read the article

• FTP not listing directory NcFTP PASV

  - by Jacob Talbot

  I am attempting to setup Multicraft on my server, all is running smoothly however the FTP won't allow anyone to connect from a remote FTP client, where net2ftp will work smoothly from a remote location. I have included the transcript from my FTP client, Transmit below to give you an idea of what's going on. I have disabled iptables as well, and still no luck either way. Transmit 4.1.7 (x86_64) Session Transcript [Version 10.8.2 (Build 12C54)] (21/10/12 11:23 PM) LibNcFTP 3.2.3 (July 23, 2009) compiled for UNIX 220: Multicraft 1.7.1 FTP server Connected to ateam.bn-mc.net. Cmd: USER jacob.9 331: Username ok, send password. Cmd: PASS xxxxxxxx 230: Login successful Cmd: TYPE A 200: Type set to: ASCII. Logged in to ateam.bn-mc.net as jacob.9. Cmd: SYST 215: UNIX Type: L8 Cmd: FEAT 211: Features supported: EPRT EPSV MDTM MLSD MLST type*;perm*;size*;modify*;unique*;unix.mode;unix.uid;unix.gid; REST STREAM SIZE TVFS UTF8 End FEAT. Cmd: OPTS UTF8 ON 200: OK Cmd: PWD 257: "/" is the current directory. Cmd: PASV Could not read reply from control connection -- timed out. (SReadline 1)

  Read the article

• management network to a network port for additional ones munin and monit

  - by paolo

  management network to a network port for additional ones munin and monit I want to build a separate Netzwek for server management. I have several network cards a linux / debian / ubuntu with computer. Set both network cards sin in the /etc/network/interfaces. # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 10.0.0.240 netmast 255.255.255.0 network 10.0.0.0 brodacast 10.0.0.255 gateway 10.0.0.254 auto eth1 iface eth1 inet static address 10.0.10.240 netmast 255.255.255.0 network 10.0.10.0 brodacast 10.0.10.255 post-up ip route add 10.0.0.0/24 dev eth0 src 10.0.0.240 table eth0-WAN post-up ip route add default via 10.0.0.254 table eth0-WAN post-up ip route add 10.0.10.0/24 dev eth1 src 10.0.10.240 table eth1-LAN post-up ip route add default via 10.0.10.200 table eth1-LAN post-up ip rule add from 10.0.0.240 table eth0-WAN post-up ip rule add from 10.0.10.240 table eth1-LAN still i adjusted / etc/iproute2/rt_tables and following routes set up in the /etc/network/interfaces I want to have both applications and the network interface separately as munin and monit only on eth1 and not have to eth0. it goes to the reboot but sometimes not always. # Traceroute-i eth1 10.0.10.200 not go what am I doing wrong?

  Read the article

• Google Chrome warning that Javascript is disabled

  - by kirchoffs415

  I hope somebody can help. I keep getting the following message when I log on: Your Javascript is disabled. Limited functionality is available. It will stay for maybe a day sometimes two. I have uninstalled javascript and reinstalled but still the same. I am using chrome. Any help would be grateful many thanks Dominic My system spec is as follows System InformationOS Name Microsoft® Windows Vista™ Home Premium Version 6.0.6002 Service Pack 2 Build 6002 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DOM-PC System Manufacturer Dell Inc. System Model Inspiron 1545 System Type X86-based PC Processor Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Dell Inc. A05, 25/02/2009 SMBIOS Version 2.4 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume3 Locale United Kingdom Hardware Abstraction Layer Version = "6.0.6002.18005" User Name DOM-PC\DOM Time Zone GMT Standard Time Installed Physical Memory (RAM) 3.00 GB Total Physical Memory 2.96 GB Available Physical Memory 1.38 GB Total Virtual Memory 5.89 GB Available Virtual Memory 4.25 GB Page File Space 3.00 GB Page File C:\pagefile.sys My System Specs

  Read the article

• Setting up MongoDB in High Performance Computing LSF linux cluster

  - by Dnaiel

  I am trying to run mongo in a LSF cluster computing environment where I have no admin control. Our sysadmin installed mongodb, but it is not running. Any ideas on what should I ask the server admin to do for it to run? Or if I could run it locally? [node1382]allelix> mongod --dbpath /users/dnaiel/ma/mongodb/ Tue Oct 2 21:33:48 [initandlisten] MongoDB starting : pid=22436 port=27017 dbpath=/seq/epigenome01/allelix/ma/mongodb/ 64-bit host=node1382 Tue Oct 2 21:33:48 [initandlisten] Tue Oct 2 21:33:48 [initandlisten] ** WARNING: You are running on a NUMA machine. Tue Oct 2 21:33:48 [initandlisten] ** We suggest launching mongod like this to avoid performance problems: Tue Oct 2 21:33:48 [initandlisten] ** numactl --interleave=all mongod [other options] Tue Oct 2 21:33:48 [initandlisten] Tue Oct 2 21:33:48 [initandlisten] db version v2.2.0, pdfile version 4.5 Tue Oct 2 21:33:48 [initandlisten] git version: f5e83eae9cfbec7fb7a071321928f00d1b0c5207 Tue Oct 2 21:33:48 [initandlisten] build info: Linux ip-10-2-29-40 2.6.21.7-2.ec2.v1.2.fc8xen #1 SMP Fri Nov 20 17:48:28 EST 2009 x86_64 BOOST_LIB_VERSION=1_49 Tue Oct 2 21:33:48 [initandlisten] options: { dbpath: "/users/dnaiel/ma/mongodb/" } Tue Oct 2 21:33:48 [initandlisten] journal dir=users/dnaiel/ma/mongodb/journal Tue Oct 2 21:33:48 [initandlisten] recover begin Tue Oct 2 21:33:48 [initandlisten] info no lsn file in journal/ directory Tue Oct 2 21:33:48 [initandlisten] recover lsn: 0 Tue Oct 2 21:33:48 [initandlisten] recover /seq/epigenome01/allelix/ma/mongodb/journal/j._0 Tue Oct 2 21:33:48 [initandlisten] recover cleaning up Tue Oct 2 21:33:48 [initandlisten] removeJournalFiles Tue Oct 2 21:33:48 [initandlisten] recover done Tue Oct 2 21:33:48 [websvr] admin web console waiting for connections on port 28017 Tue Oct 2 21:33:48 [initandlisten] waiting for connections on port 27017 It basically waits forever and cannot start mongodb. These servers are not webservers but they do have network access, it's a cloud computing LSF environment system. Any advice would be welcome, thanks in advance.

  Read the article

• Mongrel Cluster on Ubuntu Server Karmic

  - by trobrock

  I am trying to get mongrel cluster working on my Ubuntu Server Karmic box in preparation to setup Capistrano. I've been trying to get the two to work all day and finally decided to completely remove Capistrano and see if I can just get Mongrel Cluster to work. I ran this to install mongrel cluster: gem install mongrel mongrel_cluster Everything installed fine, when I change into my app's directory... # mongrel_rails -bash: mongrel_rails: command not found I can run it from its install location: # /var/lib/gems/1.8/bin/mongrel_rails Usage: mongrel_rails <command> [options] Available commands are: ... It lets me build the cluster configuration file fine, but when I run the clister:start command: # /var/lib/gems/1.8/bin/mongrel_rails cluster::start starting port 8000 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8000 -P tmp/pids/mongrel.8000.pid -l log/mongrel.8000.log starting port 8001 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8001 -P tmp/pids/mongrel.8001.pid -l log/mongrel.8001.log starting port 8002 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8002 -P tmp/pids/mongrel.8002.pid -l log/mongrel.8002.log It seems it isnt calling it from the right directory after that command, what can I do to fix this? I tried setting the path previously when trying to set up Capistrano, but the path didnt stay set when Capistrano used ssh to run the commands.

  Read the article

• Computer hangs at boot screen with new RAID card

  - by shanethehat

  I am trying to build a new server around a Biostar TH61 motherboard and an Adaptec 6405E RAID controller card. The machine booted fine from USB before the RAID card and drives were installed. After installing, on the first boot the card was detected, but then started to spit out the following message every 10 seconds: Error: Controller Kernel Stopped Running << Press any key to continue ... Following the troubleshooting guide I unplugged everything, reseated the card, and reattached all the drives. This time the machine is sitting on the boot screen without any error messages and flashing a cursor, but after 15 minutes of this, nothing seems to be happening. Given that there are no error messages I'm hesitant to reboot again. Is it normal for a RAID card to sit without a status message when it firsts boots, maybe to initialise the drives or something? The current screen output looks a bit like this: Controller #00 found at PCI Slot:01, Bus:01, Dev:00, Func:00 Controller Model: Adaptec 6405E Firmware Version: 5.2-0[18512] Memory Size: 128MB Serial number: 111111111111111 SAS WWN: 50000D1104AE9180 _ Update: So after waiting 30 minutes I've rebooted back to the Kernal Stopped Running error. Maybe time to update the RAID BIOS.

  Read the article

• Account Preferences Crashes

  - by Vivek Sundaram

  When I click on System Preferences Accounts, I get a crash [every single time]. Here are a few interesting snippets from the "Problem Report". Any ideas on how to tackle this? Process: System Preferences [607] Path: /Applications/System Preferences.app/Contents/MacOS/System Preferences Identifier: com.apple.systempreferences Version: 7.0 (7.0) Build Info: SystemPrefsApp-1750100~5 Code Type: X86-64 (Native) Parent Process: launchd [184] OS Version: Mac OS X 10.6.5 (10H574) Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000117547860 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Application Specific Information: objc_msgSend() selector name: willSelect objc[607]: garbage collection is ON Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 libobjc.A.dylib 0x00007fff80fd211c objc_msgSend + 40 1 com.apple.systempreferences 0x0000000100008426 0x100000000 + 33830 2 com.apple.systempreferences 0x0000000100006fb8 0x100000000 + 28600 3 com.apple.Foundation 0x00007fff84ede23c __NSFireDelayedPerform + 404 4 com.apple.CoreFoundation 0x00007fff824acbe8 __CFRunLoopRun + 6488 5 com.apple.CoreFoundation 0x00007fff824aadbf CFRunLoopRunSpecific + 575 6 com.apple.HIToolbox 0x00007fff82ec691a RunCurrentEventLoopInMode + 333 7 com.apple.HIToolbox 0x00007fff82ec671f ReceiveNextEventCommon + 310 8 com.apple.HIToolbox 0x00007fff82ec65d8 BlockUntilNextEventMatchingListInMode + 59 9 com.apple.AppKit 0x00007fff866c0e64 _DPSNextEvent + 718 10 com.apple.AppKit 0x00007fff866c07a9 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155 11 com.apple.AppKit 0x00007fff8668648b -[NSApplication run] + 395 12 com.apple.AppKit 0x00007fff8667f1a8 NSApplicationMain + 364 13 com.apple.systempreferences 0x0000000100001cf4 0x100000000 + 7412 ... Thread 0 crashed with X86 Thread State (64-bit): rax: 0x0000000000000001 rbx: 0x0000000200037840 rcx: 0x0000000200058031 rdx: 0x00007fff5fbfe2c0 ... Binary Images: 0x100000000 - 0x10001eff7 com.apple.systempreferences 7.0 (7.0) <30C04F1A-7711-1359-8A0E-D707B8BF2EB4> /Applications/System Preferences.app/Contents/MacOS/System Preferences 0x100758000 - 0x10076dfff com.apple.frameworks.opendirectoryconfigui 10.6.4 (10.6.4) <4711F2E8-DFA5-4C81-BB2A-B1E39D5B1B91> /System/Library/PrivateFrameworks/OpenDirectoryConfigUI.framework/Versions/A/OpenDirectoryConfigUI ...

  Read the article

• Have it fixed or buy a new one?

  - by Workshop Alex

  My dual-monitor system has just become a single-monitor system again when the older monitor decided it would be nice to just turn to black. It's a Samsung LCD monitor and is over three years old. Not sure if the warranty is still valid but I just wonder what option would me more efficient: 1) Have the monitor fixed for a small amount. 2) Buy a new monitor for a slightly bigger amount. When monitors were still expensive, I wouldn't doubt about this and would just have my monitor repaired. But prices are so low nowadays, (and repairs are expensive) that I wonder if it's worth the trouble... Of course, I'm in no hurry since I still have another monitor. It's just that I liked the dual-monitor setup. Solved! Just ordered a new monitor. A Samsumg Syncmaster T260HD 25,5". Much more than it would cost me if I just had my old one repaired but I noticed that this one has a build-in TV tuner, plus speakers. It's way more expensive than a repair, but it's worth the additional value it provides.

  Read the article

• How to debug a kernel created using ubuntu-vm-builder?

  - by user265592

  Aim: Trying to perform a code walkthrough of what functions are getting called for sending and receiving packets over the network. I am building a kernel and using gdb for debugging/ tracing purposes. I have build a vm using the following command : time sudo ubuntu-vm-builder qemu precise --arch 'amd64' --mem '1024' --rootsize '4096' --swapsize '1024' --kernel-flavour 'generic' --hostname 'ubuntu' --components 'main' --name 'Bob' --user 'ubuntu' --pass 'ubuntu' --bridge 'br0' --libvirt 'qemu:///system' And I can run the VM successfully in qemu using the following command: qemu-system-x86_64 -smp 1 -drive file=tmpGgEOzK.qcow2 "$@" -net nic -net user -serial stdio -redir tcp:2222::22 Now, I want to debug the kernel using gdb. For this I need an executable with debug symbols(vmlinux), which apparently I don't have, as the vm-builder never asked for any such options and simply created a .qcow2 file. Question 1: Am I taking the correct approach to solve the problem and is there an easier way to do it? Question 2: Is there a way to debug this kernel using GDB? P.S: I don't have hardware support for KVM. Please correct me if I am wrong. Thanks.

  Read the article

• Restoring Windows 2008 Server X86 and X64

  - by rihatum

  Restoring Windows 2008 Server (Domain Controller) We are using Backup Exec System Recovery 2010 to Image our DC. Now this software has a feature to convert the backup into a vmware or hyper-v VM I have also used disk2vhd to convert one of our dc's to a vhd and when I connected it into Hyper-V, it booted fine, I can login - BUT :-) As soon as I login, I get the activation error, that change product key, this product key isn't good for this machine etc. Question is : When in a real recovery situation, what would be the procedure to restore it either virtual or onto a physical box but be able to login and change product key etc ? In this scenario its just locked down and I cant' do anything, if this is the case, how would I replicate my production environment via these tools ? Any Ideas ? Will be grateful for some real world examples here. Same thing happens with our exchange backup / test restore either physical or virtual, can login but nothing else. Now we don't have the keys as they are OEM keys and just wondering what will happen in a real scenario, would we be purchasing another KEY or using the OEM key on our new server ? This is a test environment I am trying to create by restoring our backups either into hyper-v or physical test machines. Also, If I build up a machine (Server 2008) in a VM (Hyper-V), How can I restore just the system state backup of my DC into it ? will that give me the activation error too ? even though I would use the TRIAL ISOs provided by Microsoft ? Kind regards

  Read the article

• NFS Datastore Appears Empty!

  - by daemonchild

  Hi guys, I've got an NFS server problem. The datastore connected and seems to be a valid datastore in both the vSphere client and under /vmfs/volumes. The issue is that it appears to be empty! I can create files (eg: touch /vmfs/volumes/nfs_common/thefile) and it is correctly written to the nfs store. I can verify this by looking on the nfs server itself. But the vmkernel only sees an empty datastore; the file disappears. Another freebsd box can mount the same NFS share and see the files correctly. Some useful data: ESXi 4.0.0 Build 208167 NFS is unfsd running on a Buffalo Linkstation Pro Duo (a bit hacky I know). The share has file system permissions set to 777 at the moment. My /etc/exports is as follows, and as I say it connects fine. /mnt/array1/ESX_Shared 192.168.16.0/255.255.255.0(insecure,rw,sync,no_root_squash,no_subtree_check) The ESXi servers can also successfully mount NFS shares from other NFS servers. Any ideas guys? Thanks, Tom

  Read the article

• How to convert an MKV to AVI with minimal loss

  - by Linux Jedi

  To convert an MKV to AVI, I do two things. The first thing I do is this: ffmpeg -i filename.mkv -vcodec copy -acodec copy output.avi This converts the MKV to an AVI, but the problem is that the video does not play smoothly for some reason. That's fine, because if I do one more thing it gets fixed: ffmpeg -i output.avi -vcodec mpeg4 -b 4000k -acodec mp2 -ab 320k converted.avi After I do this then the file plays without problem. I had success doing it this way for one file, but then I tried it on another file, and there is a slight, but noticeable loss in video quality. This is the output I get when doing the second step: FFmpeg version 0.6.1, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 29 2010 18:02:10 with gcc 4.2.1 (Apple Inc. build 5664) configuration: libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 Seems stream 0 codec frame rate differs from container frame rate: 359.00 (359/1) -> 29.92 (359/12) Input #0, avi, from 'output.avi': Metadata: ISFT : Lavf52.64.2 Duration: 00:04:17.21, start: 0.000000, bitrate: 3074 kb/s Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], 29.92 fps, 29.92 tbr, 29.92 tbn, 359 tbc Stream #0.1: Audio: vorbis, 48000 Hz, stereo, s16 Output #0, avi, to 'nidome_no_kanojo.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], q=2-31, 4000 kb/s, 29.92 tbn, 29.92 tbc Stream #0.1: Audio: mp2, 48000 Hz, stereo, s16, 320 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 I just used arbitrarily large settings on the second step and it worked nicely before but not in this case. What settings should I use?

  Read the article

• Dell R320 RAID 10 with CacheCade

  - by Geekman

  I'm looking for a higher-performance build for our 1RU Dell R320 servers, in terms of IOPS. Right now I'm fairly settled on: 4 x 600 GB 3.5" 15K RPM SAS RAID 1+0 array This should give good performance, but if possible, I want to also add an SSD Cache into the mix, but I'm not sure if there's enough room? According to the tech-specs, there's only up to 4 total 3.5" drive bays available. Is there any way to fit at least a single SSD drive along-side the 4x3.5" drives? I was hoping there's a special spot to put the cache SSD drive (though from memory, I doubt there'd be room). Or am I right in thinking that the cache drives are simply drives plugged in "normally" just as any other drive, but are nominated as CacheCade drives in the PERC controller? Are there any options for having the 4x600GB RAID 10 array, and the SSD cache drive, too? Based on the tech-specs (with up to 8x2.5" drives), maybe I need to use 2.5" SAS drives, leaving another 4 bays spare, plenty of room for the SSD cache drive. Has anyone achieved this using 3.5" drives, somehow?

  Read the article

• Intel ICH9/10R raid 5 drive failure

  - by davpen

  About a year ago I was using the native Intel ICH9R Raid 5 an Intel P35 based motherboard. The system was running Vista x64 and when one of the drives failed Vista blue screened on boot until I had figured out which drive had failed and removed it (a rather nerve racking hit and miss affair). The same thing happened some months later on another similar system so it wasn't a once off. This wasn't the robust raid 5 drive failure behavior that I would have hoped for and expected. I moved to Highpoint Rocketraid 2300 and haven't had any problems although I have yet to have a drive fail with this set up. But I am now looking to build a new system based on an i7 and Windows 7. At the moment Highpoint doesn't have drivers for Windows 7 so I am considering moving back to the on board Intel Raid. Yes I know I that I might get away with using the Vista drivers but I don't really want to take that chance with critical data. The question then is has anyone else experienced a drive failure with Intel raid and how did the OS and drivers handle it? Is it safe to go back?

  Read the article

• Cannot start Postgres daemon after installing with Yum

  - by Sean the Bean

  I was trying to install Postgres 9.1.4 on Fedora 17 using Yum. If I do: sudo yum install postgres-libs sudo yum install postgres sudo yum install postgis All the installs appear to complete successfully (i.e., no errors), but I cannot start the Postgres daemon using: service postgresql initdb Like the official Postgres download guide says to do (http://www.postgresql.org/download/linux/redhat/). The error says Unknown operation initdb. RPM tells me that it installed psql to /usr/bin/, which I confirmed. It turns out that only a few components installed correctly (psql, pg_dump, pg_configure, and a few others), but most are missing (e.g., pg_ctl and postgres). I've tried several different configurations and had several of my coworkers (with more linux experience than me) look at it, but so far nothing has worked. Two of them have also run into similar issues installing Postgres using apt-get on Ubuntu, which makes me think the rpm isn't doing its job. It seems the only solution to build it from source, which is more robust anyway, but of course it takes longer. I'm wondering, though, if anyone else has run into this issue and/or has successfully installed Postgres on either Fedora or Ubuntu using a package manager like yum or apt-get? Is the rpm broken?

  Read the article

• picking a linux compatable motherboard

  - by Chris

  Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

  Read the article

• RTL8192SU + RTL8191E Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8191E working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? new in Mandriva Linux Control Center 2010.0 it shows up in Other/Unknown as RTL8191S WLAN Adapter and on the right pane this shows up Identification Vendor: ?Manufacturer Realtek Description: ?RTL8191S WLAN Adapter Media class: ? Connection Bus: ?USB Bus PCI #: ?1 PCI device #: ?5 Vendor ID: ?0x0bda Device ID: ?0x8172 Sub vendor ID: ?0x0000 Sub device ID: ?0x0000 Misc Module: ?rtl819xU In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• Memory modules not running at rated speeds.

  - by Wesley

  Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

  Read the article

• IPSec tunnelling with ISA Server 2000...

  - by Izhido

  Believe it or not, our corporate network still uses ISA Server 2000 (in a Windows Server 2003 machine) to enable / control Internet access to / from it. I was asked recently to configure that ISA Server to create a site-to-site VPN for a new branch in a office about 25 km. away from it. The idea is basically to enable not only computers, but also Palm devices (WiFi-enabled, of course), to be able to see other computers in both sites. I was also told that a simple VPN-enabled wireless AP/router (in this case, a Cisco WRV210 unit) should be enough to establish communications with the main office. To be fair, the router looks easy to configure; it was confusing at first, but further understanding of how site-to-site VPNs work cleared all doubts about it. Now I need to make modifications to our ISA Server in order to recognize the newly installed & configured "remote" VPN site. Thing is, either my Googling skills are pathethically horrible, or there doesn't seem to be much (or any, at all) information about how to configure an ISA Server 2000 for this purpose. Lots of stuff on 2004, of course; also, I think I saw something for 2006. But nothing I could find about 2000. Reading about 2004, it seems that the only way I can do site-on-site with a Cisco router (read: a non-ISA-Server machine) is through something they call a "IPSec tunnel". Fair enough. However, I can't figure for the life of me how could I even start to find, leave alone configure, such a thing. Do you, people, happen to know how to do IPSec tunelling on a ISA Server 2000, so I can connect to a Cisco WRV210 VPN-enabled router, and build a site-to-site VPN for both networks? Or is this not possible at all? (Meaning I should change anything in this configuration to make it work...)

  Read the article

• port forwarding with socks over proxy

  - by Oz123

  I am trying to browse a wiki that runs on a server inside one domain from another domain. The wiki is accessible only on the LAN, but I need to browse it from another LAN to which I connect with an SSH tunnel ... Here is my setup and the steps I did so far: ~.ssh/confing on wikihost: Host gateway User kisteuser Port 443 Hostname gateway.companydomain.com ProxyCommand /home/myuser/bin/ssh-https-tunnel %h %p # ssh-https-tunnel: # http://ttcplinux.sourceforge.net/tools/stunnel Protocol 2 IdentityFile ~/.ssh/key_dsa LocalForward 11069 localhost:11069 Host server1 User kisteuser Hostname localhost Port 11069 LocalForward 8022 server1:22 LocalForward 17001 server1:7100 LocalForward 8080 www-proxy:3128 RemoteForward 11069 localhost:22 from wikihost myuser@wikihost: ssh -XC -t gateway.companydomain.com ssh -L11069:localhost:22 server1 on another terminal: ssh gateway.companydomain.com Now, on my companydomain I would like to start firefox and browse the wiki on wikihost. I did: [email protected] ~ $ ssh gateway Have a lot of fun... kisteuser@gateway ~ $ ssh -D 8383 localhost user@localhost's password: user@wikiserver:~> My .ssh/config on that side looks like that: host server1 localforward 11069 localhost:11069 host localhost user myuser port 11069 host wikiserver forwardagent yes user myuser port 11069 hostname localhost Now, I started firefox on the server called gateway, and edited the proxy settings to use SOCKSv5, specifying that the proxy should be gateway and use the port 8383... kisteuser@gateway ~ $ LANG=C firefox -P --no-remote And, now I get the following error popping in the Terminal of wikiserver: myuser@wikiserver:~> channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused Confused? Me too ... Please help me understand how to properly build the tunnels and browse the wiki over SOCKS protocol. update: I managed to browse the wiki on wikiserver with the following changes: host wikiserver forwardagent yes user myuser port 11069 hostname localhost localforward 8339 localhost:8443 Now when I ssh gateway I launch Firefox and go to localhost:8339 and I hit the start page of the wiki, which is served on Port 8443. Now I ask myself is SOCKS really needed? Can someone elaborate on that ?

  Read the article

< Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >