Search Results

Search found 23614 results on 945 pages for 'update from'.

Page 548/945 | < Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >

• Network Drive Via Ethernet Port for Speed?

  - by Yar

  I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

  Read the article

• Could someone explain why my world reconstructed from depth position is incorrect?

  - by yuumei

  I am attempting to reconstruct the world position in the fragment shader from a depth texture. I pass in the 8 frustum points in world space and interpolate them across fragments and then interpolate from near to far by the depth: highp float depth = (2.0 * CameraPlanes.x) / (CameraPlanes.y + CameraPlanes.x - texture( depthTexture, textureCoord ).x * (CameraPlanes.y - CameraPlanes.x)); // Reconstruct the world position from the linear depth highp vec3 world = mix( nearWorldPos, farWorldPos, depth ); CameraPlanes.x is the near plane CameraPlanes.y is the far. Assuming that my frustum positions are correct, and my depth looks correct, why is my world position wrong? (My depth texture is of format GL_DEPTH_COMPONENT32F if that matters) Thanks! :D Update: Screenshot of world position http://imgur.com/sSlHd So you can see it looks nearly correct. However as the camera moves, the colours (positions) change, which they shouldnt. I can get this to work, if I do the following: Write this into the depth attachment in the previous pass: gl_FragDepth = gl_FragCoord.z / gl_FragCoord.w / CameraPlanes.y; and then read the depth texture like so: depth = texture( depthTexture, textureCoord ).x However this will kill the hardware z buffer optimizations.

  Read the article

• Is chroot the right choice for my use case?

  - by Anthony

  Backstory: I am working on setting up a MineCraft server and want to allow admins to have ssh access to the MineCraft server console and appropriate mc server files, but not the whole system. The console provided by the minecraft server is only available to the user that launched the process. In addition, the admins will need terminal access to some basic cli tools such as wget, cp, mv, rm, and a text editor. Plan: I have already setup the ssh aspect of things, requiring pre-shared keys and whatnot. Setup a jailed environment in which all user activity will be contained. Setup user accounts. - The first user account will be the minecraft user. The minecraft user will start the MC server in a multiuser screen session and allow the other admins to attach to it. - Subsequent users should have their own /home directory for normal usage. Setup acl for the appropriate files to allow each user to edit the mc server files. No one will be doing system updates, nor will anyone be installing any programs, so I'll be the only user with sudo. The Issues: I don't want the ssh users to have access to the whole system. Users will still need to use wget or curl to update the mc server files. Is chroot the right tool for this use case, or is there something more appropriate for the job? I have no experience setting up a chroot environment and have found several tools to aid in this process. Jailkit seems to be the most robust, but it's not in the standard repos.

  Read the article

• How can I accurately determine the age of a hard drive?

  - by Todd Stout

  Yes, if it's large, heavy, and only 65 Meg in capacity, you can assume it's ancient. An RLL controller would positively indicate the drive is from antiquity. What about drives that are only 3 or 4 years old? If I know the serial number, make and model is there a public database that indicates a manufacturing date? Update: As trite as this question might seem to some, the hard drive I was looking at that precipitated this question had no obvious manufacturing date stamped on it. I realize that most do. I think the answers given are very useful to myself and others.

  Read the article

• Pull row of data from one place in spreadsheet to another

  - by bookcasey

  I have a list of names and their assorted properties. I am trying to find a way to quickly move an entire row's worth of data into a different sheet so I can manipulate it. Currently I can accomplish this by copy and pasting the entire row, but this is not elegant nor dynamic (the number in blue does not update with this method): My ideal solution: A name is typed into the "Name" column. The spreadsheet program pulls the associated row from the "main" sheet into the new sheet. I am currently using Numbers.app, but am curious if this is possible in Excel, OpenOffice Calc, Google Docs, or any other spreadsheet program. Thank you.

  Read the article

• Prevent Mac OS X from prompting disk initialization/formatting

  - by Just-A-User.A-Superuser

  I have a TrueCrypt partition. When I insert it in Mac OS X, it always prompt me to initialize the hard disk. Is there a way to prevent Mac OS X from detecting uninitialize hard disk? [UPDATE] By the way, as Truecrypt suggested while I'm in Windows, I must make partitions so the OS won't detect the hard drive as uninitialized. Windows respected that the drive already have contents by the mere fact that it has partitions, while Mac OS X thinks that it is still uninitialized. I think Mac OS X is trying to be smart by detecting if each partition has a valid filesystem id/marker.

  Read the article

• How to make google Chrome omnibar search sites permanent?

  - by tim

  In google Chrome, when you have visited a site, say wikipedia.com, your can thereafter search the site directly from the omnibar by typing in a few letters then hitting tab. However, I noticed that after I clear my cache, Chrome does not remember the search autofills, and I once again have to visit the site manually for it to take effect. Is there a way to make the omnibar searches permanent even after doing a full cache clear in google Chrome? Thanks. Update: I tried the suggestion below, but bookmarking the site just allowed me to autocomplete the address. It did not allow me the option to hit tab to do the search directly in the omnibar. Any suggestions?

  Read the article

• Wireless BMC4311 driver install

  - by user113910

  Exasperated with Ubuntu 12.04 and BCM4311 driver. HP2133 (was SUSE 10) Installed 12.04 in March. It ran well until November with no updates) then updates killed my wireless controller. Trolled forums & other for fix. Tried sudo -apt-get ing & gedit ing. Finally got it working (on full update with STA driver) Hwew!—thought that was it, only to fail again after 3-4 days. Tried all the fixes again but sudo -apt-get ing & gedit ing does not fix. I'm not without experience either: first 'boot-loader' I/P from 20 switch panel, seq to 4096 bit core-store: run to I/P larger processes from paper tape reader. Gone thru acoustic-coupled networks-to-billboards (before 'the net') pre-DOS, DOS, Windows 3.1 & all the others. This is a tough problem. Any advice?

  Read the article

• Mountain Lion screen crashes after returning from sleep

  - by Aron Rotteveel

  During the past 3 days I have experienced the following issue: when returning from sleep, I see an extremely garbled version of my desktop. The only thing that seems to help is a reboot. My first guess is that this is related to the video card. After looking into this issue, I found a lot of problems related to ML and returning from sleep, such as this post on AskDifferent, but I think this is a different issue because it does not speak of a garbled screen. Some more details: System: MacBook Pro 15" early 2011, 2,2GHZ I7, 8GB Ram, AMD Radeon HD6750M 1024 The issue seems to happen only when I open my laptop in the morning; if I close and open my laptop during the day, it does not seem to happen. The issue 'solves' when rebooting. Photo of how this looks: Update November 27th 2012: I re-installed my laptop a couple of weeks ago, which seemed to have solved the problem, but sadly, it still persists.

  Read the article

• How SSD hard drive affected speed of your website (asp.net/linq/ms sql database)

  - by Sergey Osypchuk

  I have a small database (<1G) But we have a lot of complex logi? in website and client complains on render time, which is 3-5 seconds. We are not google, and thousands of users a day is our dream, so size is not a problem, but speed is important. Can anybody share with experience with SSD drives for ASP.NET (MVC)/LINQ/MS SQL based application ? How you performance increased? UPDATE: this whitepaper states that it will be 20 times faster. http://www.texmemsys.com/files/f000174.pdf

  Read the article

• Why can't I reconnect to my Philips SHB9000 bluetooth headset?

  - by Thomas Eyde

  When I connected my Philips SHB9000 bluetooth to my Windows 7 (64 bit) for the very first time, it worked well. I had to manually change the default playback device, but otherwise it worked. Then, when I start up my computer from standby, it's nearly random when I can reconnect or not. My last option is to remove the bluetooth device and reconnect it. But now, even that doesn't work. The sad thing is, this used to work better on Windows 7 beta. Windows Update has a new driver which fails to install. Searching for this driver yields nothing. I thought all vendors had an official site for their drivers? Well, Philips seems to have none. If there is no answer to this problem, my advice is to NOT buy this headset. It's good looking, the sound is nice, but what need do we have from that if we can't use the bloody device?

  Read the article

• bluetooth doesn't recognize mouse (and other devices)... sometimes

  - by Angelo

  I have a problem with bluetooth with Vista, running on my MacBook. It often doesn't recognize my wireless Magic Mouse. And I saw that it even doesn't seem to start as the pictogram in the task-bar isn't there most of the time I run Vista. But I'm only an Apple-nerd, so I don't know to much about this issue on Vista. When reinstalling Boothcamp or other updates, then once in a while bluetooth recognizes my own mouse (and other devices from some neighbours... so that implicates that the problem must be the bluetooth function in the first place, not my mouse.) Is there some update for the bluetooth application? Angelo

  Read the article

• First ATMs programming language

  - by revo

  First ATMs performed tasks like a cash dispenser, they were offline machines which worked with punch cards impregnated with Carbon and a 6-digit PIN code. Maximum withdrawal with a card was 10 pounds and each one was a one-time use card - ATM swallowed cards! The first ATM was installed in London in the year 1967, as I looked at time line of programming languages, there were many programming languages made before that decade. I don't know about the hardware neither, but in which programming language it was written? *I didn't find a detailed biography of John Shepherd-Barron (ATM inventor at 70s) Update I found this picture, which is taken from a newspaper back to the year 1972 in Iran. Translated PS : Shows Mr. Rad-lon (if spelled correctly), The manager of Barros (if spelled correctly) International Educational Institute in United Kingdom at the right, and Mr. Jim Sutherland - Expert of Computer Kiosks. In the rest of the text I found on this paper, these kind of ATMs which called "Automated Computer Kiosk" were advertised with this: Mr. Rad-lon (if spelled correctly) puts his card to one specific location of Automated Computer Kiosk and after 10 seconds he withdraws his cash. Two more questions are: 1- How those ATMs were so fast? (withdrawal in 10 seconds in that year) 2- I didn't find any text on Internet which state about "Automated Computer Kiosk", Is it valid or were they being called Computer in that time?

  Read the article

• Optimal Disk Setup for OLTP SQL Server

  - by Chris

  We have a high transaction (lots of reads and writes) database server (running SQL 2005) that is currently set up with a RAID 1 OS partition (C:) and a RAID 5 data/log/tempdb partition (D:). The C: has 2 drives and the D: has 4 drives. The server has around 300 databases ranging from 10MB to 2GB in size. I have been reading up on best practices for partioning the disks, but would like some opinions on our setup since we are so limited in the number of disks. It seems like RAID 10 is popular, but I dont think we could use it with only 6 total disks to work with. Thanks. Update I went with 3 RAID 1 Partitions (2 disks each) Partition 1: OS, TempDB, Backups Partition 2: Logs Partition 3: Data

  Read the article

• Wrong screen resolution with HDMI output to HDTV

  - by bruno077

  I own an HDTV with a native resolution of 1360x768. Sometimes I plug in my laptop to watch movies, and I used to do it with a VGA cable. I've had no problem setting the laptop to the TV native resolution with the VGA cable (1360x768). Having acquired an HDMI cable recently, I can't go past 1280x720, and if I do, the TV displays "invalid format". At 1280x720, the image is viewable but not centered, so for example I can't see the windows taskbar or titlebars. I've tried both cables (VGA and HDMI) with the same settings: Laptop's display turned off and trying to set the Tv's native resolution. What could I try to fix this issue? Could it be a faulty cable? (I'm using a Thinkpad with Windows 7) EDIT: My graphics adapter appears listed as Mobile Intel(R) 4 Series Express Chipset Family (Searching for my laptop's model yields Intel GMA 4500MHD as the graphic card) I'm downloading a driver update from Intel's website. I'll report my progress when I check its behavior tomorrow.

  Read the article

• Javascript MVC in principle

  - by Michael

  Suppose I want to implement MVC in JavaScript. I am not asking about MVC frameworks. I am asking how to build it in principle. Let's consider a search page of an e-commerce site, which works s follows: User chooses a product and its attributes and press a "search" button. Application sends the search request to the server, receives a list of products. Application displays the list in the web page. I think the Model holds a Query and list of Product objects and "publishes" such events as "query updated", "list of products updated", etc. The Model is not aware of DOM and server, or course. View holds the entire DOM tree and "subscribes" to the Model events to update the DOM. Besides, it "publishes" such events as "user chose a product", "user pressed the search button" etc. Controller does not hold any data. It "subscribes" to the View events, calls the server and updates the Model. Does it make sense?

  Read the article

• How to remotely install Linux via SSH?

  - by netvope

  I need to remotely install Ubuntu Server 10.04 (x86) on a server currently running RHEL 3.4 (x86). I'll have to be very careful because no one can press the restart button for me if anything goes wrong. Have you ever remotely installed Linux? Which way would you recommend? Any advice for things to watch out? Update: Thanks for your help. I managed to "change the tires while driving"! The main components of my method are drawn from HOWTO - Install Debian Onto a Remote Linux System, grub legacy: Booting once-only, grub single boot and kernel panic reboot , and Ubuntu Community Documentation: InstallationFromKnoppix Here is the outline of what I did: Run debootstrap on an existing Ubuntu server Transfer the files to the swap partition of the RHEL 3.4 server Boot into tha swap partition (the debootstrap system) Transfer the files to the original root partition Boot into the new Ubuntu system and finish up the installation with tasksel, apt-get, etc I tested the method in a VM and then applied to the server. I was lucky enough that everything went smoothly :)

  Read the article

• Screencast not producing files

  - by JohnS

  I'm using Gnome 3 on 12.04 and trying to create a screencast. I start the screencast using the Ctrl-Alt-Shift-R shortcut and the red light appears in the bottom right corner. I go about my business then press the key combination again when done. The problem is that the screencast file gets generated maybe 1 out of 10 times. Is there a log file I can look at to determine the issue? How about a settings file? UPDATE: I did some additional testing. What's happening is that the screencast does work but it appends the new video to the existing file. Even if the file is renamed or moved to trash. Emptying trash does not create a new file either. Not sure where the video gets recorded to then. The only reliable way I've found to have a new file created is to log out of the session and log back in. Is this expected behaviour? Is there a way to force screencast to create a new file every time Ctrl-Alt-Shift-R is pressed?

  Read the article

• Poor backlink profile - search rankings not updated for 2+ months

  - by fistameeny

  I am carrying out some work on a website that is a PR2 with a few good quality, relevant backlinks (PR4-6). It has a presence on Twitter that is updated regularly, a Google Places listing, and listings on some decent directories (Qype etc). The site was rebuilt into Drupal 7 two months ago, with all the basics done - URL rewriting, XML Sitemap submitted to Google, and most importantly, good quality, structured content. I've noticed that Google is still showing "old" URL's from the previous version of the site that was ditched 8 weeks ago. I think the site may be penalised under the Penguin update, as a previous SEO company created many low quality links from link farms/directories. My question is what the correct way to deal with this is. Bing Webmaster Tools can "disavow" links, and I guess I can attempt to contact the link farms to have them removed. I've already submitted a request to Google to request that we have the penalty removed as we're trying to tidy up a bad history. We submit updated sitemaps to Google and Bing daily, and have built some further decent quality, relevant links. Is there anything further I can do?

  Read the article

• Ubuntu 12.04 and Nvidia GTX 550 Ti

  - by Jim

  OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

  Read the article

• Moving while doing loop animation in RPGMaker

  - by AzDesign

  I made a custom class to display character portrait in RPGMaker XP Here is the class : class Poser attr_accessor :images def initialize @images = Sprite.new @images.bitmap = RPG::Cache.picture('Character.png') #100x300 @images.x = 540 #place it on the bottom right corner of the screen @images.y = 180 end end Create an event on the map to create an instance as global variable, tada! image popped out. Ok nice. But Im not satisfied, Now I want it to have bobbing-head animation-like (just like when we breathe, sometimes bob our head up and down) so I added another method : def move(x,y) @images.x += x @images.y += y end def animate(x,y,step,delay) forward = true 2.times { step.times { wait(delay) if forward move(x/step,y/step) else move(-x/step,-y/step) end } wait(delay*3) forward = false } end def wait(time) while time > 0 time -= 1 Graphics.update end end I called the method to run the animation and it works, so far so good, but the problem is, WHILE the portrait goes up and down, I cannot move my character until the animation is finished. So that's it, I'm stuck in the loop block, what I want is to watch the portrait moving up and down while I walk around village, talk to npc, etc. Anyone can solve my problem ? Or better solution ? Thanks in advance

  Read the article

• Lost icons (firefox,notepadpp,fzilla) on Windows 7

  - by Shiki

  Okay the deal is simple. I lost the icons and see that white icon instead of them in the taskbar which is really annoying. Tried reinstalling Firefox, no use. (Tried checking the firefox icon in the app folder (program files), but same situation there, no icon). OS: Windows 7 x64 up-to-date, every update installed (Maybe related: I installed my PC with a wrong account name. Renamed it. That rename caused much headache since Windows messes with my user folder, bla bla. Now I made a new user, called "S" and I'm using this ever since that incident.)

  Read the article

• svcbundle for easier SMF manifest creation

  - by Glynn Foster

  One of the new features we've introduced in Oracle Solaris 11.1 is a new utility called svcbundle. This utility allows for the easy creation of Service Management Facility (SMF) manifests and profiles, allowing you to take advantage of the benefits of automatic application restart without requiring you to have full knowledge of the XML file format that is used when integrating with the SMF. Integrating into SMF is one of the easiest and most obvious ways to take advantage of some of the mission critical aspects of the operating system, but many customers were often finding the initial learning curve of creating an XML manifest to be too hard. With the release of Oracle Solaris 11 11/11, SMF had a more integral part to play as more and more system configuration was starting to use the SMF configuration repository for the backend storage. This provides a number of aspects, including the ability to carefully manage customized administrative configuration, site specific configuration, and vendor provided configuration at different layers, helping to preserve them during system update. I've written a new article, Using svcbundle to Create SMF Manifests and Profiles in Oracle Solaris 11, to give you a feel for the help we can provide in converting your applications over to SMF, or doing some site wide configuration using profiles. This is the first pass at creating such a tool, so we'd love to hear feedback of your experiences using it.

  Read the article

• DOS Batch file to find "new" files by date

  - by Todd McArthur

  My PC has entered an infinite BSOD loop - but I do have access to a safe-mode command prompt. I'm trying to get an idea of "what changed" that might have triggered this. e.g. I might have gotten a virus, or an app update went belly up. I'd like to thus see which files were created/modified in the last few days/week or at least the *.exe, *.dll, *.com, *.bat etc. I thought I was ok with my Batch-fu but I'm stumped on how to write a quick batch file/command that would list the files for me. REM This will find the files, but the results are all muddled REM all EXE files, reverse sort by date, recursively through sub-directories dir *.exe /O-D /S What I'd really like is to find all (executable filetypes) that were created/modified in the last 3-7 days. Can anyone point me in the right direction?

  Read the article

• Exchange 2007 Email Address Policies

  - by Ryan Migita

  We have recently upgraded to Exchange 2007 (from 2003) and have noticed the change from recipient policies to email address policies. We have two separate domains (let's call them domaina.com and domainb.com) we receive email for, have email address policies and both email address policies are not applied. In our Exchange 2003 environment, domaina.com was the default email address when we created new mailboxes and due to the migration, domainb is the default (and its email address policy is a higher priority). Now, when we create a new mailbox (or edit existing ones), the primary email address becomes domainb.com. Now the question is, is this as simple as putting the email address policies in the correct order? Do I have to apply both policies? What effect will the above changes make to existing mailboxes? Since we do not have any conditions set on the policies, I assume prior to making these changes, I should force all domainb mailboxes to not automatically update email address based on policy? Thanks in advance!

  Read the article

< Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >