Search Results

Search found 1812 results on 73 pages for 'amd radeon'.

Page 55/73 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

  - by Jagged

  I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

  Read the article

• How can I fix apt-get autoremove wanting to uninstall most of my packages?

  - by Stefano

  I did change my packages in synaptic from manually installed to Automatically (they were not manually installed but automatically). Now they are marked for Autoremove. I tested it with sudo apt-get autoremove and the result is shown below (a reduced version because its almost all packages). I remember last year I had same issue and solved it via Ubuntu forums but the forum is down and I cannot reach the post! Anyone has any idea how to fix this? sudo apt-get autoremove Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: unity-asset-pool unity-greeter unity-lens-applications unity-lens-files unity-lens-music unity-lens-photos unity-lens-video unity-scope-gdrive unity-scope-musicstores unity-scope-video-remote unity-services unity-tweak-tool unity-webapps-amazoncloudreader unity-webapps-common unity-webapps-facebookmessenger unity-webapps-gmail unity-webapps-googledocs unity-webapps-googleplus unity-webapps-launchpad unity-webapps-linkedi xserver-xorg-input-wacom xserver-xorg-video-all xserver-xorg-video-ati xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-intel xserver-xorg-video-mach64 xserver-xorg-video-mga xserver-xorg-video-modesetting xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-qxl xserver-xorg-video-r128 xserver-xorg-video-radeon xserver-xorg-video-s3 xserver-xorg-video-savage xserver-xorg-video-siliconmotion xserver-xorg-video-sis xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident xserver-xorg-video-vesa xserver-xorg-video-vmware xul-ext-unity xul-ext-webaccounts xul-ext-websites-integration y-ppa-manager yad zenity zenity-common zip 0 upgraded, 0 newly installed, 1440 to remove and 0 not upgraded. After this operation, 3,853 MB disk space will be freed. Do you want to continue [Y/n]?

  Read the article

• Permission issues causes Unity Segmentation fault

  - by Dj Gilcrease

  I upgraded from 13.04 to 13.10 and I can boot to the unity-greeter and login just fine, but after login I just get a black screen with a cursor. I have tried following http://help.ubuntu.com/community/BinaryDriverHowto/ATI http://help.ubuntu.com/community/RadeonDriver and the manual install of the downloaded AMD drivers. All have the same affect. Also I have read Black screen after login with cursor I get a black screen after logging in ubuntu 13.04 black screen after login Ubuntu 13.10 - Black screen after login session Ubuntu 13.04 - Black screen with unresponsive cursor Upgrade to Ubuntu 13.04 Problem - Boots into Blank Black Screen All of which were no further help then the two support articles about ATI drivers So I switched back to the default drivers and went a little further into debugging, when I do ctrl+alt+F1 and login and try unity --debug > unity_start.log then ctrl+alt+F8 the screen stays black with a cursor and when I switch back ctrl+alt+F1 the contents of the log output are http://pastebin.com/rdQG4Hb0 However when I try sudo unity --debug > unity_start_root.log then ctrl+alt+F8, unity starts and the output of the log is http://pastebin.com/Yv4RD2j7 The fact that it starts as root tells be it is either a permissions issue of some required file or there is some setting that is specific to my user that is causing the SIGSEGV. So to narrow this down I activated the guest account and tried to login and got the same black screens with only a mouse cursor, so this tells me that it is not a configuration issue, but a permissions issue, so how do I narrow down which file has the wrong permissions? Also is there anything further that may help debug this issue? Ok after a few more hours of googling I found that if I add myself to the video group I can login and see the desktop, but there are lots of other permission related issues, so I am thinking something went wonky with PolicyKit during the upgrade, is there a way to reset PolicyKit settings for a user?

  Read the article

• The ship "shudders" in scrolling Asteroids

  - by Ciaran

  In my Asteroids game the user can scroll through space. When scrolling, the ship is drawn in the centre of the window. I use interpolation. I scroll the window uing glOrtho, centering it around the centre of the ship. On my first machine (7 years old, Windows XP, NVIDIA), I am doing 50 updates and 76 frames per second. This is smooth. My other machine an old compaq laptop (Pentium III) with Linux and Radeon OpenGL driver delivers 50 updates and 30 frames per second. The ship regularly seems to "shudder" back and forth when at maximum thrust. When you position the mouse cursor beside the ship it is obvious that its relative position in the window changes. Also, the stars seem blurred into short "lines". Playing the game in non-scrolling mode, the ship moves within the window, glOrtho is therefore not called repeatedly and there is no problem. I suspect a bug in my positioning of the ship and the window but I have dumped out these values and they seem to only go forward, not forward-back-forward. The driver does support double buffering. I guess if it is my bug I need to slow the frame-rate down to debug properly. My question: is this an obvious driver bug or is the slower machine uncovering a bug in my stuff and if so, some debugging tips would be appreciated. I am drawing in world co-ordinates and letting OpenGL do the scaling and translation so if I had a quick way of verifying what pixel co-ordinates OpenGL produces for the ship centre, that would help clarify this.

  Read the article

• Java crashes on lubuntu but not Ubuntu

  - by Echogene

  I have lubuntu and Ubuntu partitions on my drive. I've been having an interesting time with the new lubuntu partition. I've encountered strange things with the game Minecraft, Java and graphics drivers on the lubuntu partition. Firstly, I'll say that Minecraft runs fine at about 60fps on the Ubuntu partition with the latest drivers. (This is lower than it should be as it's a pretty decent graphics card [Radeon HD 5700].) When I first started lubuntu, I tried to see if I could get Minecraft running on Java. Java crashed when loading the main game graphics on both Sun and OpenJDK without proprietary drivers. Java also crashed on both Javas with proprietary drivers after the necessary restart. However, after disabling (with 'remove' button) the proprietary drivers with jockey-gtk in the session after the restart to install the drivers, Minecraft ran very well at ~120fps. This didn't continue after another restart, when it ran at 9fps. After failing thereafter on lubuntu to get it working at 15fps, I tried reinstalling lubuntu and installed the exact same driver (the latest one, not the one appearing on jockey) and Java versions as on Ubuntu. That is, now Ubuntu and lubuntu have the same graphics driver and Java version. Minecraft still crashes in the same way on lubuntu but works fine on Ubuntu. I would appreciate any explanation for any of these events. What differences between lubuntu and Ubuntu could cause this? Edit: After installing the 32bit driver version on lubuntu (seeing as lubuntu is 32bit), I have Java "working" for Minecraft. However, it is at <15fps again and it can't log in to servers as it takes too long.

  Read the article

• indirect rendering issue on 12.04, using ati driver

  - by lurscher

  I have ubuntu 12.04 64-bit system, when i run glxinfo i see some strange error about indirect rendering and failed to load some lib32/dri/swrast_dri libraries. Any idea what is going on? please let me know if i can enhance the relevant information provided in this question $ LIBGL_DEBUG=verbose glxinfo name of display: :0 libGL: screen 0 does not appear to be DRI2 capable libGL: OpenDriver: trying /usr/lib32/dri/tls/swrast_dri.so libGL: OpenDriver: trying /usr/lib32/dri/swrast_dri.so libGL error: dlopen /usr/lib32/dri/swrast_dri.so failed (/usr/lib32/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL: OpenDriver: trying /usr/lib/dri/tls/swrast_dri.so libGL: OpenDriver: trying /usr/lib/dri/swrast_dri.so libGL error: dlopen /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: swrast_dri.so libGL error: reverting to indirect rendering display: :0 screen: 0 direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose) server glx vendor string: ATI server glx version string: 1.4 server glx extensions: GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group client glx vendor string: Mesa Project and SGI client glx version string: 1.4 client glx extensions: GLX_ARB_create_context, GLX_ARB_create_context_profile, GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_framebuffer_sRGB, GLX_EXT_create_context_es2_profile, GLX_MESA_copy_sub_buffer, GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap, GLX_INTEL_swap_event GLX version: 1.4 GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_multithread_makecurrent, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: AMD Radeon HD 6800 Series OpenGL version string: 1.4 (2.1 (4.2.11762 Compatibility Profile Context)) OpenGL extensions: GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program, GL_ARB_fragment_program_shadow, GL_ARB_framebuffer_object, GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, GL_ARB_texture_compression, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_blit, GL_EXT_framebuffer_multisample, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture3D, GL_EXT_texture_compression_s3tc, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod, GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_ATI_draw_buffers, GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_NV_texture_rectangle, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

  Read the article

• Ubuntu Studio Audio Issue with Alsa - No sound

  - by ddragon

  Spec: OS: Ubuntu Studio 13.10 64bit CPU: AMD FX 4100 Quad Core Memory: 6GB DDR3 Video: Radeon HD 4250 (embedded on the mobo) Sound: Delta 66 PCI Issue: I just installed Ubuntu Studio and found out that the streaming audio on a few common website such as Youtube had no sound, and also my CD/DVDs via a player. Thus, in the terminal, I entered: sudo alsa force-reload It actually worked but the sound/audio output was MONO and NOT Stereo (the sources are set to stereo stereo), and it seemed I was not able to locate any settings that can switch the output sound to stereo at all. I went through many forums and eventually "autoremove" pulseaudio since many said I would not be able to utilize both pulseaudio and alsa in this case. Now, I have no audio whatsoever. Does this version of Ubuntu only offer mono sound/audio no matter what I do? Then, I may just need to ditch the whole thing and go back to Windows, which I don't want to since Ubuntu Studio offers many great apps, soundfonts etc.. I have also installed restricted extra, but even after rebooting, it did not resolve the issue. In the terminal mode, I pulled "alsamixer" and unmuted almost everything. But still no sound after a reboot. Just an FYI, I have no saved data under this version of Ubuntu Studio yet, so please feel free to let me know whether I need to install Studio 12.10 instead or mess with some installing/uninstalling apps/plug-ins, etc... If it breaks at some point, all I need to do is to re-install it, which I do not mind at all. Or, if you can provide me a step by step instruction to get this work, I do not mind clean install the Studio 13.10 then wait for your instruction AT ALL!

  Read the article

• Help find correct alsa model for onboard sound (alc887?) that will work with jack and have correct mixer setup

  - by Jazz

  I have a Gigabyte GA-MA74GMT-S2 motherboard. I am using Jack for sound - connected to ALSA. I am running Ubuntu 12.04. aplay -l reports card 0: SB [HDA ATI SB], device 0: ALC887 Analog [ALC887 Analog] The problem is that the default setup, that alsa decides to use, causes stuttering and xruns no matter how generous I set the frames/period or periods/buffer etc. Also, Jack works fine if I plug in an external USB sound system and use that. My processor is an AMD phenom x4 945, and I have 8GB ram, and Video card is Geforce GTX550 Ti, all of which should be quite capable enough. I also tried Pulseaudio and that works fine, but I need to use Jack At first I thought it might be an interrupt conflict, but I have found that adding "options snd-hda-intel model=generic" to /etc/modprobe.d/alsa-base.conf causes it to play correctly, but the limited mixer setup lacks controls I need - so this setup isn't good enough. Still, it seems to prove it isn't a hardware conflict. I have tried many other models, such as 3stack, 6stack, auto and even basic, and they all suffer from the stuttering. I eventually found "options snd-hda-intel model=3stack-6ch-intel" works without stuttering, and mixer is much closer to what it needs to be. Can anyone help on how to get a correct and accurate model for ALSA to use? More info on the hardware that might help... *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:16 memory:fe024000-fe027fff

  Read the article

• How can I reinstall XRandR without serious disruption to 12.04?

  - by broiyan

  This is the sequence that leads to xrandr going missing: Installed 12.04 on a system with a motherboard using the Intel G45 chipset and the E8400 Core 2 Duo and AMD Radeon HD 5450 video card. Installed fglrx when ubuntu prompted via Additional Drivers. Ran Catalyst (Administrative) to select multi-desktop and rebooted. Ran Catalyst (Administrative) to select Xinerama and rebooted. Answer yes to about 3 prompts that request to send bug reports to ubuntu. At this point Settings > Appearances no longer offers the widget that allows you to resize the Unity Launcher icons. Also Settings > Displays says randr extension is not present. BTW: This same sequence is repeatable, including the issues with the missing icon resizer and xrandr, so there is clearly bug fixing potential here. How can I get xrandr reinstalled without un-installing a large set of dependencies? I realize that if I un-install xrandr I will have the chance to re-install but the number of dependencies is large and so an un-install will cause many systems to be un-installed and I am afraid that will ruin Ubuntu 12.04. Hence, I'm looking for a more direct fix. I thought rebooting the .ISO disk and reinstalling would be a good fix but obviously not since this problem is repeatable.

  Read the article

• Window borders missing - gtk-window-decorator segmentation fault

  - by Balakrshnan Ramakrishnan

  I have been using Ubuntu for about 1 year now and I got a problem just two days ago. Suddenly I started experiencing a problem with the window borders (title bar with close, maximize, and minimize buttons). The problem : The window borders disappear I run "gtk-window-decorator --replace" For like 20 seconds everything is back to normal But it again returns to the problem. I searched over the Internet and found that my problem is similar to what is specified in this bug report: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/814091 This bug report says that the "fix released". I updated everything using the Update Manager, but still the problem remains. Can anyone let me know whether the problem is fixed? If yes, can you please let me know how to do it? I have already tried normal replace/reset commands like unity --reset unity --replace compiz --replace The "window borders" plugin is on in CCSM (CompizConfig Settings Manager) and it points to "gtk-window-decorator". I use Ubuntu 11.10 on an Intel Core2Duo T6500 with AMD Mobility Radeon HD 4300 graphics card. If you need more information, please let me know.

  Read the article

• Why do I need lib64 on my 32 bit machine?

  - by Tim

  I am trying to install Oracle on my 32-bit machine that runs Ubuntu 10.4. I am following install Oracle on Ubuntu tutorial. At the very first step there is a requirement to manually install library libstdc++5. Author does 2 steps: download libstdc++5_3.3.6-17ubuntu1_amd64.deb from here download ia32-libs_2.7ubuntu6.1_amd64.deb from here As you may have probably noticed these 2 files contain an "_amd64" postfix, which pointed me out that author is using 64-bit amd processor. Each of these files author copied to /usr/lib64 and /usr/lib32 folders correspondingly and simply make soft links libstdc++.so.5 in both folders. Since I am running 32-bit machine I have simply downloaded those 2 files without "_amd64" postfix. Unexpectedly for me I have also found 2 lib folders in my /usr folder: /usr/lib64 and /usr/lib. So here is my problem: I do not understand which files and where do I have to copy: 1) Do I have to make the same steps as the author has done, i.e. download files with "_amd64" postfixes and place them in my /usr/lib64 and /usr/lib folders? 2) Or do I have to use libraries without "_amd64" postfix? And one more question: why do I have /usr/lib64 at all?

  Read the article

• Sound & video problem with Toshiba Satellite L35-SP1011

  - by Diego Garcia

  I've installed Ubuntu 10.04 on a Satellite L35-SP1011 and there's no sound. Actually i have many video problems cause i had to disable effect because when it had effect activated, laptop got frozen many times. I saw this problem but in older ubuntu versions and tried some fixes without success. Any idea on how to solve my audio and video problems? I've tried these instructions https://help.ubuntu.com/community/RadeonDriver without success. My video card is a ATI Express 200M. lspci output 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] complete lspci output at http://pastebin.com/AVk1WWQt Update #1 - It's the same on Ubuntu 10.10 and Kubuntu 10.10... Slow graphics, and no sound. Update #2 - Sound SOLVED I edited /etc/modprobe/alsa-base.conf in Ubuntu 10.10 and added options snd-hda-intel model=asus Now i'm working on video, I added xorg-edgers ppa, updated and upgraded without big difference... it's working better but without transparency.

  Read the article

• How to improve battery life on Samsung 13.3” Series 7 Ultra (NP730U3E-S01AU)?

  - by beam022

  Recently I've bought a Series 7 Ultra Samsung ultrabook and decided to change the OS from originally installed Windows 8 to Ubuntu 14.04LTS. However, it's difficult not to notice great decrease in battery life: on pre-installed Windows 8 battery would last for about 6 hours while on Ubuntu it's almost empty after 2 hours of same kind of work (wi-fi, web, vlc, spotify, intellij idea). I'm not here to say that Ubuntu's battery performance is worse than Windows, but to ask for suggestions how to improve the situation (2 hours of work is pretty poor battery life). Can you recommend some sources, applications or tips/tricks that would improve battery life on my ultrabook? I really like the Ubuntu experience, but this makes my machine much less reliable. I suspect that graphic video card might be one of the issues here. Let me give you tech specs of the ultrabook: Processor: Intel® Core™ i5 Processor 3337U (1.80GHz, 3MB L3 Cache) Chipset: Intel HM76 Graphic: AMD Radeon™ HD 8570M Graphics with 1GB gDDR3 Graphic Memory (PowerExpress) and Intel(R) HD Graphics 4000 Display: 13.3" SuperBright+ 350nit FHD LED Display (1920 x 1080), Anti-Reflective Memory: 10GB DDR3 System Memory at 1,600MHz Hard-drive: 128GB Solid-state Drive More informations here, on the official page. If it's helpful to provide additional info, I'm happy to do it, just let me know what you need. Thank you.

  Read the article

• Installation taking a very long time, hangs at "Configuring bcmwl-kernel-source"

  - by user290522

  I am installing Ubuntu 14.04(32-bit) on my laptop (Compaq Presario V2000), and after about 7 hours, it is still in Configuring bcmwl-kernel-source (i386) mode. The messages I read are as follows: ubuntu kernel: [22814.858163] ACPI: \_SB_.PCI0.LPC0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported with the numbers in the square brackets increasing. I have had Windows XP professional on this laptop, and I am erasing it. I am not sure if I should turn off the laptop, and start all over again. About 4 years ago I installed Ubuntu on this laptop, and that was very fast. The only problem I encountered was my wireless, and could not make it to work, and switched back to Windows. I appreciate any comments regarding this installation taking such a long time. After 40 hours the installation was still in configuring mode with the following messages: ubuntu CRON[29329]: (root) CMD ( cd/ && run-part .. report /etc/cron-hourly) I did the following to check for errors: pressed ctrl-alt-f2. This time the system froze. I had no other choice but to turn off the laptop, and start all over again. The exact model of the laptop is "Compaq Presario V2069CL Notebook PC" with AMD processor.

  Read the article

• How to re-configure graphics from Intel integrated to Intel / ATI switchable?

  - by Bucic

  There are lots of 'how to get switchable graphics to work' guides but I found none on how to configure a system for switchable graphics operation on Ubuntu from the ground up, nor explaining the current driver situation for particular computer models (integrated+discrete combinations). Example: https://help.ubuntu.com/community/HybridGraphics My system being mature and on Intel integrated card also makes things complicated. System information: Ubuntu 12.04 amd64, installed clean with system configured to use only the integrated Intel card Lenovo Thinkpad T500 Intel GMA 4500MHD / ATI Mobility Radeon HD 3650 Current situation: Mature and up-to-date system with no configuration changes to what's given above. I've made a backup image of the system (Clonezilla) so regardless of what's written below let's assume it's our starting point. If something in What I have already tried is not clear you may as well diregard it. What I have already tried: Configuring BIOS to switchable graphics and: Installing Additional Hardware drivers - returned an error. Installing proprietary amd-driver-installer-12.6-legacy-x86.x86_64.run automatically - system starts to 'low-graphics mode'. Tried fixing as per https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6.2C_special_case_for_Intel.2BAC8-ATI_hybrid_graphics Got lost, gave up. Please note that while configuring BIOS for integrated graphics only is pretty straightforward, configuring for switchable graphics is not.

  Read the article

• Screen becomes black after pressing dash or alt-tab

  - by cegerxwin

  I did an upgrade from 11.04 to 11.10. Unity 3d becomes a black screen after pressing the dash-button or after pressing alt-tab to switch between open windows. I can see the panel on the top(lock,sound,..) and the panel on the left (launcher) but the rest is black. It looks like a maximised black window. The open Windows are active but I cant see them. I logout by pressing logout in the right top corner and pressing enter (because logout is default focused on the dialogue screen) and leave unity3d. Unity3d worked with 11.04 very good. If I press the dash button the dash looks like an 16-Bit or 8-Bit window and buttons for maximise, minimise and close are displayed and looks inverted. I have rebooted my notebook just now and log in to Unity 3D and tested some features of Unity and everything works well. The black thing is only a layer. I can use my desktop but cant see anything because of the layer, but everything works. It seems so, that a layer appear when pressing dash or alt-tab and does not disappear when close dash or choose a running app with alt-tab. you will see the necessary info related video problems: Unity support: /usr/lib/nux/unity_support_test -p OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RC410 OpenGL version string: 2.1 Mesa 7.11-devel Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes xorg glxinfo lspci -nn | grep VGA 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]

  Read the article

• Ubuntu 12.04 NVIDIA GeForce Go 7600 black screen during boot

  - by Florian Schmidt

  I'm using Ubuntu as the only operating system since two years. In the first Ubuntu versions I had seen my BIOS screen and the boot screens. Actually im using Ubuntu 12.04 and my screen stays black until Ubuntu is started (both screens are missing). I guess this situation appeared the first time in Ubuntu 11 (not sure). I searched via google and tried the popular activities but was not able to fix my issue. I opened the laptop and checked all connections. I'm using boot option nomodeset. I had a look through many many web pages. I don't know how to continue and hope somebody could be helpful. My hardware: Acer Aspire 9300 AMD Turion 64 x2 NVIDIA GeForce Go 7600 (using proposed driver) lspci | grep NVIDIA 00:00.0 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:04.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 03:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce Go 7600] (rev a1) So my question is what to do to fix the black screen during boot?

  Read the article

• Windows being placed on wrong monitor

  - by osarusan

  I'm running a fresh install of Ubuntu 12.04x64 (ATI Radeon HD4770 with open source drivers) and I am having trouble getting windows to appear on the right screen. Yesterday I plugged in my secondary monitor and it worked perfectly out of the box, except that for some reason, compiz wants to place windows on the secondary monitor rather than the first. This is a problem because I don't use the secondary monitor 100% of the time, and I don't want windows being placed on it when it is off. Also, it's only some windows that are getting placed there. For example, the "Edit Connections" window from the networking menu is always placed off my primary screen. There are a number of other windows that do the same. While some, like nautilus, always appear on the proper monitor. I played around with Compiz Config Settings Manager and found that if I disable the "Place Windows" plugin, all of the windows appear on the proper monitor -- except that they are placed underneath the Unity Panel, so I have to alt-drag them out each time in order to use them. With out without that plugin, I can't seem to get a sensible setup. The windows are supposed to appear only on the active display, but for some reason Compiz doesn't want to do that with some windows. Does anyone know a fix for this? I'd rather not have to disable and re-enable my monitor every single time I use it...

  Read the article

• Problems with both LightDM and GDM using DisplayLink USB monitor

  - by Austin

  When I use LightDM, it will auto-login to desktop just fine. The only problem is Compiz doesn't work, and menus don't work. I can't right-click the desktop, and I can't select program menus in the top bar (I.e clicking "File" does nothing). When I use GDM, I only get a blank blue screen and the mouse cursor. I can't Ctrl+Alt+Backspace to restart, but I can Ctrl+Alt+F1 and Ctrl+Alt+F7 to switch modes. I don't think it's auto-logging me in, but I'm not sure. It plays the login screen noise. Will update with more information when I get home! EDIT: Okay, so I did a fresh install, just to ensure I hadn't borked something playing in the console. I reconfigured my setup as I did before, with the same results. Here's what I followed. The only difference is that instead of setting "vga=normal nomodeset" I set "GRUB_GFXPAYLOAD_LINUX = text". Also I only have the DisplayLink monitor configured in my xorg.conf file. At this point I'm using the open radeon driver, although I used the proprietary ati driver before. I'm not sure if I'm having a problem with: - X configuration - Graphics driver - DisplayLink driver - Unity - LightDM - Compiz - Or something else The resolution of the monitor is 800x480, 16bit. I tried setting a larger virtual resolution of 1200x720 (because the real resolution is lower than the recommended resolution), but it causes Ubuntu to boot into low graphics mode. When I get home I'm going to install the fglrx driver and see if it enables virtual resolutions, which may further enable my window manager to function properly.

  Read the article

• OpenGL: Attempt to allocate a texture to big for the current hardware

  - by AnonymousMan

  I'm getting the following error: java.io.IOException: Attempt to allocate a texture to big for the current hardware at org.newdawn.slick.opengl.InternalTextureLoader.getTexture(InternalTextureLoader.java:320) at org.newdawn.slick.opengl.InternalTextureLoader.getTexture(InternalTextureLoader.java:254) at org.newdawn.slick.opengl.InternalTextureLoader.getTexture(InternalTextureLoader.java:200) at org.newdawn.slick.opengl.TextureLoader.getTexture(TextureLoader.java:64) at org.newdawn.slick.opengl.TextureLoader.getTexture(TextureLoader.java:24) The image I'm trying to use is 128x128. System.out.println(GL11.glGetInteger(GL11.GL_MAX_TEXTURE_SIZE)); I get: 32. 32??!! My graphics card is AMD Radeon HD 7970M with 2048 MB GDDR5 RAM, I can run all the latest games in 1080p and 60fps with no problem, and those textures sure as hell doesn't look like they are 32x32 pixels to me! How can I fix this? -- Edit: Here's the chaos code I use to init OpenGL: Display.setDisplayMode(new DisplayMode(500,500)); Display.create(); if (!GLContext.getCapabilities().OpenGL11) { throw new Exception("OpenGL 1.1 not supported."); } Display.setTitle("Game"); glMatrixMode(GL_PROJECTION); glLoadIdentity(); GLU.gluPerspective(45, 1, 0.1f, 5000); Mouse.setGrabbed(true); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glEnable(GL_TEXTURE_2D); glClearColor(0, 0, 0, 0); glEnable(GL_DEPTH_TEST); glDepthFunc(GL_LEQUAL); glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glEnable(GL_BLEND); glEnable(GL_POINT_SMOOTH); glEnable(GL_LINE_SMOOTH); glEnable(GL_POLYGON_SMOOTH); glEnable(GL_POLYGON_OFFSET_FILL); glShadeModel(GL_SMOOTH); Display is a LWJGL thing, it makes the OpenGL context and the window. Anyway, I don't think there's anything in the init code that can help me but you never know...

  Read the article

• How to create an Ubuntu 12.10 live CD?

  - by B Biswas

  I downloaded the Ubuntu 12.10 installer from Ubuntu website. However, I find that it is not an iso image and I am unable to create a live CD (or DVD) from it. I could not find any help from Ubuntu website as well as internet. Please help. PS - My OS is Windows XP. The Ubuntu installer I downloaded from Ubuntu website is a zip file. I unzipped the file and it has a wubi file. PS - Thanks. I could create a Live CD. 1) First I tried to do it in my laptop which has Win 7. It was showing the Ubuntu installer as a zip file and could not able to burn it in to a DVD. At that time I raised the question. 2) Later I copied the installer in my desktop which has Win XP. There the installer is shown as an ISO file and I burnt it in to a DVD and created the Live CD. This is working nicely in the the desktop. 3) I tried to run the Live Cd in my Laptop which is an AMD machine, the system does not boot up. 4) In my office desktop which has Win 7 the Ubuntu installer is showing as an ISO file. My questions are as follows: A) Why the Ubuntu installer file is showing differently in different machines? B) Why the Live CD is not working in my Laptop?

  Read the article

• Canon Pixma 432 network scanner

  - by Donald Cutler

  I have a problem with a Canon Pixma MX432 Printer/Scanner. I just removed Windows 7 and installed Ubuntu 14.04 8/17/2014 on an older desktop that I built (The computer is an AMD build with an ASUS motherboard). The printer/scanner is an all-in-one unit that is networked in my house via WiFi. All of the computers in my house can access this printer/scanner. My Macbook, my wife's Windows 8 laptop, and my kids mini iPads. I am giving Linux a test-drive with some success as far as setting devices up. But, for the life of me I cannot figure out my scanner issue. If anyone can help I would appreciate it. Make/Model: Canon Pixma MX432 PPD Driver: I have no idea how to get this info. Supported?: no, from the information I gather from old forum posts. Works?: the printer works via WiFi perfectly, but not the scanner. The Simple Scan program sees the scanner, but produces an error when I attempt to scan. I also tried XSANE, but that program does not even detect the scanner. NOTE: THE PRINTER IS WORKING OFF OF AN UBUNTU DRIVER AND NOT A CANON DRIVER. Linux Version: Ubuntu 14.04 I tried the steps in this post, downloaded the "scangearmp-mx430series-1.90-1-deb.tar.gz" file, but could not get the scanner to work. http://ubuntuforums.org/archive/index.php/t-2096430.html any suggestions?

  Read the article

• Insufficient permissions within Eclipse when installed via synaptic in Ubuntu 12.04

  - by Clayton

  I installed Eclipse via the Synaptic Package Manager on Ubuntu 12.04 Desktop (more details on footer). However, from within Eclipse, I lack sufficient permissions to perform upgrades on my package and add-ons. I'm a recovering Windows user, and while I have a couple of years Ubuntu experience, I am unfamiliar with the command-line and mainly interact through the packaged GUI. Specifically, I am trying to install the upgrade for Eclipse CVS Clientorg.eclipse.cvs.feature.group1.3.100.v20110520-0800-7B78FHl9VF7BD7KBM4GP9C I am tracking the varying installation advice on a similar question eclipse install: Gaurav Butola Basically, the most current upgrades are available directly from eclipse?... But at some point I remember reading that the latest version of eclipse had been designed for the previous LTS of Ubuntu - I don't know if that is still true. I have read about the vulnerabilities of Java 6, and so I have gone with Open Java 7 openjdk-amd64 (if that has any relevance to which Eclipse package and installation method I choose). But I'm not crazy about the idea of creating a gksudo link in the sidebar launcher. I don't know enough about chown to use it - if that's even appropriate (I don't want stray java escaping from Eclipse and connecting to SkyNet). Another possible solution that I foresee is modifying my user's group memberships/privileges on the file system as a whole. The only other information that I think might be relevant is that I notice that Synaptic installed all of the files into /usr/ instead of /opt/ like I have seen recommended. So should I be changing ownership, reinstalling using a non-Synaptic method, or what? Any advice is greatly appreciated. Ubuntu information Ubuntu 12.04 LTS Memory 2.9 GiB Processor AMD Sempron(tm) Processor LE-1300 Graphics VESA: XXXXXXX OS type 64-bit Eclipse Version: 3.7.2 Build id: I20110613-1736 Ubuntu Developers :/usr/share$ ls -h -l drwxr-xr-x 5 root root 4.0K Sep 13 08:43 eclipse Install paths: /. /usr /usr/share ...

  Read the article

• Black Screen after Resume from Sleep (Kubuntu)

  - by user20271

  I know there is a lot of other posts like this, but I have been looking for hours and I still haven't found any solution. I have recently installed Kubuntu Linux along side my Windows 7, the sleep on my Win7 works fine and resumes like normal. When I am loaded into Kubuntu, and I put my laptop to sleep, it goes into sleep as normal. When I go to RESUME from the sleep, the screen stays solid black, it doesn't light up, no blinking curser or anything. The Wi-Fi light is 'off' (orange) and I cannot turn it on. The Caps lock and the Num lock lights on the keyboard blink slowly. I hear something on the inside of the computer start to spin. I am not very experienced with Kubuntu/Linux, but I do know a bunch of computer terminology, I am still far from an expert though. I have about 300GB designated to my Win7 stuff, and another partition with about 100GB for my Kubuntu Linux. My computers specs are as follows: Windows 7 64-bit I have the most recent version of Kubuntu because I just downloaded it a few days ago and updated it yesterday. AMD Athlon Duel-Core processor 4GB of RAM And it is a HP G61 Laptop

  Read the article

• Elementary OS boots to a terminal (other OS) [on hold]

  - by Benjamin Watson

  Im new to this site, please forgive me if I missed some posting protocol of some sort. I am attempting to install Luna on my samsung s2 laptop (a8 amd radeon 7640g) and when I click on try luna, it just pulls up a terminal after the insignia (curvy E). When I install it, same issue. CTRL-ALT-f7 reveals this (hand typed, sorry if there's typos) Starting preload: *starting CUPS printing spooler/server *stopping save kernel messages preload. fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 dosfsck 3.0.12, 29 oct 2011 FAT32, LFN /dev/sda1: 3 files, 245/189518 clusters /dev/sda2: clean, 133841/30294016 files, 2529529/121164544 blocks Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd *starting AppArmor profiles speech-dispacher disabled; edit /etc/default/speech-dispenser *stopping system V initialisation compatibility *starting system V runlevel compatability *starting apci daemon *starting anac(h)ronistic cron *starting save kernal messages *starting ntp server ntpd *starting regular background program processing damon *starting deferred execution scheduler *stopping anac(h)ronistic cron *starting LightDM Display Manager *starting bluetooth daemon *starting mDNS/DNS-SD daemon *starting CPU interrupts balancing daemon *stopping Send an event to indicate plymouth is up saned disabled ; edit /etc/default/saned *starting network connection manager *starting crash report submission daemon *checking battery state... That's it. I can't make heads or tails of it. Please note that while I've been running linux for about a year, I'm still fairly new to all of this, so try to be detailed in your explanations and/or descriptions of what I need to do. Any/all help would be appreciated. Thank you for your time.

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >