Search Results

Search found 4688 results on 188 pages for 'cd burning'.

Page 55/188 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• Cluster Node Recovery Using Second Node in Solaris Cluster

  - by Onur Bingul

  Assumptions:Node 0a is the cluster node that has crashed and could not boot anymore.Node 0b is the node in cluster and in production with services active.Both nodes have their boot disk mirrored via SDS/SVM.We have many options to clone the boot disk from node 0b:- make a copy via network using the ufsdump command and pipe to ufsrestore - make a copy inserting the disk locally on node 0b and creating the third mirror with SDS- make a copy inserting the disk locally on node 0b using dd commandIn this procedure we are going to use dd command (from my experience this is the best option).Bare in mind that in the examples provided we work on Sun Fire V240 systems which have SCSI internal disks. In the case of Fibre Channel (FC) internal disks you must pay attention to the unique identifier, or World Wide Name (WWN), associated with each FC disk (in this case take a look at infodoc #40133 in order to recreate the device tree correctly).Procedure:On node 0b the boot disk is c1t0d0 (c1t1d0 mirror) and this is the VTOC:* Partition  Tag  Flags    Sector     Count    Sector  Mount Directory      0      2    00          0   2106432   2106431      1      3    01    2106432  74630784  76737215      2      5    00          0 143349312 143349311      4      7    00   76737216  50340672 127077887      5      4    00  127077888  14683968 141761855      6      0    00  141761856   1058304 142820159      7      0    00  142820160    529152 143349311We will insert the new disk on node 0b and it will be seen as c1t2d0.1) On node 0b we make a copy via dd from disk c1t0d0s2 to disk c1t2d0s2# dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2 bs=8192kA copy of a 72GB disk will take approximately about 45 minutes.Note: as an alternative to make identical copy of root over network follow Document ID: 47498Title: Sun[TM] Cluster 3.0: How to Rebuild a node with Veritas Volume Manager2) Perform an fsck on disk c1t2d0 data slices:   1.  fsck -o f /dev/rdsk/c1t2d0s0 (root)   2.  fsck -o f /dev/rdsk/c1t2d0s4 (/var)   3.  fsck -o f /dev/rdsk/c1t2d0s5 (/usr)   4.  fsck -o f /dev/rdsk/c1t2d0s6 (/globaldevices)3) Mount the root file system in order to edit following files for changing the node name:# mount /dev/dsk/c1t2d0s0 /mntChange the hostname from 0b to 0a:# cd /mnt/etc# vi hosts # vi hostname.bge0 # vi hostname.bge2 # vi nodename 4) Change the /mnt/etc/vfstab from the actual:/dev/md/dsk/d201        -       -       swap    -       no      -/dev/md/dsk/d200        /dev/md/rdsk/d200       /       ufs     1       no      -/dev/md/dsk/d205        /dev/md/rdsk/d205       /usr    ufs     1       no      logging/dev/md/dsk/d204        /dev/md/rdsk/d204       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d206        /dev/md/rdsk/d206       /global/.devices/node@2 ufs     2       noglobalto this (unencapsulate disk from SDS/SVM):/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/dsk/c1t0d0s0       /dev/rdsk/c1t0d0s0       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs     2       no globalIt is important that global device partition (slice 6) in the new vfstab will point to the physical partition of the disk (in our case slice 6).Be careful with the name you use for the new disk. In this case we define it as c1t0d0 because we will insert it as target 0 in node 0a.But this could be different based on the configuration you are working on.5) Remove following entry from /mnt/etc/system (part of unencapsulation procedure):rootdev:/pseudo/md@0:0,200,blk6) Correct the link shared -> ../../global/.devices/node@2/dev/md/shared in order to point to the nodeid of node 0a (in our case nodeid 1):# cd /mnt/dev/mdhow it is now.... node 0b has nodeid 2lrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@2/dev/md/shared# rm shared# ln -s ../../global/.devices/node@1/dev/md/shared sharedhow is going to be... with nodeid 1 for node 0alrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@1/dev/md/shared7) Change nodeid (in our case from 2 to 1):# cd /mnt/etc/cluster# vi nodeid8) Change the file /mnt/etc/path_to_inst in order to reflect the correct nodeid for node 0a:# cd /mnt/etc# vi path_to_instChange entries from node@2 to node@1 with the vi command ":%s/node@2/node@1/g"9) Write the bootblock to the disk... just in case:# /usr/sbin/installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0Now the disk is ready to be inserted in node 0a in order to bootup the node.10) Bootup node 0a with command "boot -sx"... this is becasue we need to make some changes in ccr files in order to recreate did environment.11) Modify cluster ccr:# cd /etc/cluster/ccr# rm did_instances# rm did_instances.bak# vi directory - remove the did_instances line.# /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/directory # grep ccr_gennum /etc/cluster/ccr/directory ccr_gennum -1 # /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/infrastructure # grep ccr_gennum /etc/cluster/ccr/infrastructure ccr_gennum -112) Bring the node 0a down again to the ok prompt and then issue the command "boot -r"Now the node will join the cluster and from scstat and metaset command you can verify functionality. Next step is to encapsulate the boot disk in SDS/SVM and create the mirrors.In our case node 0b has metadevice name starting from d200. For this reason on node 0a we need to create metadevice starting from d100. This is just an example, you can have different names.The important thing to remember is that metadevice boot disks have different names on each node.13) Remove metadevice pointing to the boot and mirror disks (inherit from node 0b):# metaclear -r -f d200# metaclear -r -f d201# metaclear -r -f d204# metaclear -r -f d205# metaclear -r -f d206verify from metastat that no metadevices are set for boot and mirror disks.14) Encapsulate the boot disk:# metainit -f d110 1 1 c1t0d0s0# metainit d100 -m d110# metaroot d10015) Reboot node 0a.16) Create all the metadevice for slices remaining on boot disk# metainit -f d111 1 1 c1t0d0s1# metainit d101 -m d111# metainit -f d114 1 1 c1t0d0s4# metainit d104 -m d114# metainit -f d115 1 1 c1t0d0s5# metainit d105 -m d115# metainit -f d116 1 1 c1t0d0s6# metainit d106 -m d11617) Edit the vfstab in order to specifiy metadevices created:old:/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs      2       no  globalnew:/dev/md/dsk/d101        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/md/dsk/d105        /dev/md/rdsk/d105       /usr    ufs     1       no      logging/dev/md/dsk/d104        /dev/md/rdsk/d104       /var    ufs     1       no      logging#/dev/md/dsk/106       /dev/md/rdsk/d106       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d106        /dev/md/rdsk/d106       /global/.devices/node@1 ufs     2       noglobal18) Reboot node 0a in order to check new SDS/SVM boot configuration.19) Label the mirror disk c1t1d0 with the VTOC of boot disk c1t0d0:# prtvtoc /dev/dsk/c1t0d0s2 > /var/tmp/VTOC_c1t0d0 # fmthard -s /var/tmp/VTOC_c1t0d0 /dev/rdsk/c1t1d0s220) Put DB replica on slice 7 of disk c1t1d0:# metadb -a -c 3 /dev/dsk/c1t1d0s721) Create metadevice for mirror disk c1t1d0 and attach the new mirror side:# metainit d120 1 1 c1t1d0s0# metattach d100 d120# metainit d121 1 1 c1t1d0s1# metattach d101 d121# metainit d124 1 1 c1t1d0s4# metattach d104 d124# metainit d125 1 1 c1t1d0s5# metattach d105 d125# metainit d126 1 1 c1t1d0s6# metattach d106 d126

  Read the article

• Static IP settings on Windows 2003 server not getting saved

  - by Prashant Mandhare

  We have a Dell PowerEgde 1950 server with Broadcom NetXtreme gigabit ethernet card, and we are facing a strange problem with static IP assignment. When we assign a static IP to this broadcom NIC, settings are not getting saved. Following are the steps to reproduce problem open TCP/IP properties window for broadcom NIC manually enter static IP address and other details like gateway, DNS, etc. apply and close properties dialog. re-open TCP/IP properties windows, you will see your static IP settings lost and changed to "obtain IP address manually" but when checked using ipconfig command, you will still see your same static IP settings but, when checked using ipconfig command after rebooting server, these static ip settings are completely gone and automatically obtained IP is assigned Supplementary information: Recently we had formatted this server and installed windows 2003 from OEM windows setup CD (not from OS installation CD received from Dell). After windows installation was over, broadcom NIC drivers were installed.

  Read the article

• Git apache : unable to push via http

  - by GlinesMome

  I have to setup a server which can allow http vcs management (such as git and svn). svn support works well, but I have some trouble with git. Actual configuration: CentOS 5 Apache 2.2.8 Git 1.7.4.1 The /etc/httpd/conf/httpd.conf content: ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 10 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule mysql_auth_module modules/mod_auth_mysql.so LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.2/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.2 PassengerRuby /usr/bin/ruby Include conf.d/*.conf User apache Group apache ServerAdmin aedi.admin@domain ServerName s1.domain UseCanonicalName Off DocumentRoot "/data/www/" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/data/www/"> Options -Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <IfModule mod_userdir.c> UserDir disable </IfModule> DirectoryIndex index.html index.html.var AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> TypesConfig /etc/mime.types DefaultType text/plain <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </IfModule> </Directory> <IfModule mod_dav_fs.c> DAVLockDB /var/lib/dav/lockdb ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" <IfModule mod_negotiation.c> <IfModule mod_include.c> <Directory "/var/www/error"> AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback </Directory> </IfModule> </IfModule> BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80> DocumentRoot /data/www/s1/html ServerName s1.asso.domain ErrorLog logs/s1.error.log </VirtualHost> <VirtualHost *:80> DocumentRoot /data/www/s2/old ServerName s2.domain ErrorLog logs/s2.error.log RailsBaseURI /blog <Directory /data/www/s2/html/blog> Options -MultiViews </Directory> </VirtualHost> <VirtualHost *:443> DocumentRoot /data/www/s2/html ServerName s2.domain ErrorLog logs/s2.error.log RailsBaseURI /blog <Directory /data/www/s2/html/blog> Options -MultiViews </Directory> </VirtualHost> The /etc/httpd/conf.d/git.conf content: Alias /git /data/www/s2/git <Directory /data/www/s2/git> Options +Indexes DAV on SSLRequireSSL </Directory> Fine, every repository are created by the same way: git --bare init "$1.git" && cd "$1.git" && git update-server-info && chmod -R 770 . && cd .. && git clone `pwd`/"$1.git" && cd "$1" && echo 42 > answer && git add . && git commit -m "Initial commit" && git push origin master && git rm answer && git commit -a -m "Clean repository" && git push && cd .. && rm -Rf "$1" Then, on the client side, I try: ~ $ git clone https://s2.domain/git/repo.git Cloning into 'repo'... warning: You appear to have cloned an empty repository. ~ $ cd repo repo $ echo 42 > answer && git add . && git commit -m "init" && git push origin master [master (root-commit) a2aadb1] init 1 file changed, 1 insertion(+) create mode 100644 answer Fetching remote heads... refs/ refs/heads/ refs/tags/ updating 'refs/heads/master' from 0000000000000000000000000000000000000000 to a2aadb1772e12104ce358f7ff9a11db5d93ead7d sending 3 objects MOVE d81cc0710eb6cf9efd5b920a8453e1e07157b6cd failed, aborting (22/502) MOVE 2c186ad49fa24695512df5e41cb5e6f2d33c119b failed, aborting (22/502) MOVE a2aadb1772e12104ce358f7ff9a11db5d93ead7d failed, aborting (22/502) Updating remote server info fatal: git-http-push failed The apache associated logs: my.ip - - [21/Sep/2012:16:19:19 +0200] "GET /git/repo.git/info/refs?service=git-upload-pack HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:19 +0200] "GET /git/repo.git/HEAD HTTP/1.1" 200 23 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:48 +0200] "GET /git/repo.git/info/refs?service=git-receive-pack HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "GET /git/repo.git/HEAD HTTP/1.1" 200 23 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/ HTTP/1.1" 207 569 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "HEAD /git/repo.git/info/refs HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "HEAD /git/repo.git/objects/info/packs HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/info/ HTTP/1.1" 405 336 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "LOCK /git/repo.git/info/refs HTTP/1.1" 200 475 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "GET /git/repo.git/objects/info/packs HTTP/1.1" 200 1 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/ HTTP/1.1" 207 2608 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/heads/ HTTP/1.1" 207 941 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/tags/ HTTP/1.1" 207 940 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/refs/ HTTP/1.1" 405 336 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/refs/heads/ HTTP/1.1" 405 342 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "LOCK /git/repo.git/refs/heads/master HTTP/1.1" 200 475 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/a2/ HTTP/1.1" 404 317 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/2c/ HTTP/1.1" 207 4565 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/d8/ HTTP/1.1" 207 4565 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/d8/1cc0710eb6cf9efd5b920a8453e1e07157b6cd_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/objects/a2/ HTTP/1.1" 201 296 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/2c/186ad49fa24695512df5e41cb5e6f2d33c119b_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/d8/1cc0710eb6cf9efd5b920a8453e1e07157b6cd_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/2c/186ad49fa24695512df5e41cb5e6f2d33c119b_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/a2/aadb1772e12104ce358f7ff9a11db5d93ead7d_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/a2/aadb1772e12104ce358f7ff9a11db5d93ead7d_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "UNLOCK /git/repo.git/refs/heads/master HTTP/1.1" 204 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/ HTTP/1.1" 207 2608 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/heads/ HTTP/1.1" 207 941 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/tags/ HTTP/1.1" 207 940 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "UNLOCK /git/repo.git/info/refs HTTP/1.1" 204 - "-" "git/1.7.11.4" I have tried many configurations (even smart http from progit), but a major part of them consider the fact that they have a dedicated domain, but I'm in a sub-directory, so I can't apply these examples. Have you got an idea of the problem? have you got solutions? have you got configuration example with non-root directory? For your help, In advance, Thanks.

  Read the article

• "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

  - by anjanesh

  I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

  Read the article

• I am trying to deploy my first rails app using Capistrano and am getting an error.

  - by Andrew Bucknell

  My deployment of a rails app with capistrano is failing and I hoping someone can provide me with pointers to troubleshoot. The following is the command output andrew@melb-web:~/projects/rails/guestbook2$ cap deploy:setup * executing `deploy:setup' * executing "mkdir -p /var/www/dev/guestbook2 /var/www/dev/guestbook2/releases /var/www/dev/guestbook2/shared /var/www/dev/guestbook2/shared/system /var/www/dev/guestbook2/shared/log /var/www/dev/guestbook2/shared/pids && chmod g+w /var/www/dev/guestbook2 /var/www/dev/guestbook2/releases /var/www/dev/guestbook2/shared /var/www/dev/guestbook2/shared/system /var/www/dev/guestbook2/shared/log /var/www/dev/guestbook2/shared/pids" servers: ["dev.andrewbucknell.com"] Enter passphrase for /home/andrew/.ssh/id_dsa: Enter passphrase for /home/andrew/.ssh/id_dsa: [dev.andrewbucknell.com] executing command command finished andrew@melb-web:~/projects/rails/guestbook2$ cap deploy:check * executing `deploy:check' * executing "test -d /var/www/dev/guestbook2/releases" servers: ["dev.andrewbucknell.com"] Enter passphrase for /home/andrew/.ssh/id_dsa: [dev.andrewbucknell.com] executing command command finished * executing "test -w /var/www/dev/guestbook2" servers: ["dev.andrewbucknell.com"] [dev.andrewbucknell.com] executing command command finished * executing "test -w /var/www/dev/guestbook2/releases" servers: ["dev.andrewbucknell.com"] [dev.andrewbucknell.com] executing command command finished * executing "which git" servers: ["dev.andrewbucknell.com"] [dev.andrewbucknell.com] executing command command finished * executing "test -w /var/www/dev/guestbook2/shared" servers: ["dev.andrewbucknell.com"] [dev.andrewbucknell.com] executing command command finished You appear to have all necessary dependencies installed andrew@melb-web:~/projects/rails/guestbook2$ cap deploy:migrations * executing `deploy:migrations' * executing `deploy:update_code' updating the cached checkout on all servers executing locally: "git ls-remote [email protected]:/home/andrew/git/guestbook2.git master" Enter passphrase for key '/home/andrew/.ssh/id_dsa': * executing "if [ -d /var/www/dev/guestbook2/shared/cached-copy ]; then cd /var/www/dev/guestbook2/shared/cached-copy && git fetch origin && git reset --hard 369c5e04aaf83ad77efbfba0141001ac90915029 && git clean -d -x -f; else git clone [email protected]:/home/andrew/git/guestbook2.git /var/www/dev/guestbook2/shared/cached-copy && cd /var/www/dev/guestbook2/shared/cached-copy && git checkout -b deploy 369c5e04aaf83ad77efbfba0141001ac90915029; fi" servers: ["dev.andrewbucknell.com"] Enter passphrase for /home/andrew/.ssh/id_dsa: [dev.andrewbucknell.com] executing command ** [dev.andrewbucknell.com :: err] Permission denied, please try again. ** Permission denied, please try again. ** Permission denied (publickey,password). ** [dev.andrewbucknell.com :: err] fatal: The remote end hung up unexpectedly ** [dev.andrewbucknell.com :: out] Initialized empty Git repository in /var/www/dev/guestbook2/shared/cached-copy/.git/ command finished failed: "sh -c 'if [ -d /var/www/dev/guestbook2/shared/cached-copy ]; then cd /var/www/dev/guestbook2/shared/cached-copy && git fetch origin && git reset --hard 369c5e04aaf83ad77efbfba0141001ac90915029 && git clean -d -x -f; else git clone [email protected]:/home/andrew/git/guestbook2.git /var/www/dev/guestbook2/shared/cached-copy && cd /var/www/dev/guestbook2/shared/cached-copy && git checkout -b deploy 369c5e04aaf83ad77efbfba0141001ac90915029; fi'" on dev.andrewbucknell.com andrew@melb-web:~/projects/rails/guestbook2$ The following fragment is from cap -d deploy:migrations Preparing to execute command: "find /var/www/dev/guestbook2/releases/20100305124415/public/images /var/www/dev/guestbook2/releases/20100305124415/public/stylesheets /var/www/dev/guestbook2/releases/20100305124415/public/javascripts -exec touch -t 201003051244.22 {} ';'; true" Execute ([Yes], No, Abort) ? |y| yes * executing `deploy:migrate' * executing "ls -x /var/www/dev/guestbook2/releases" Preparing to execute command: "ls -x /var/www/dev/guestbook2/releases" Execute ([Yes], No, Abort) ? |y| yes /usr/lib/ruby/gems/1.8/gems/capistrano-2.5.17/lib/capistrano/recipes/deploy.rb:55:in `join': can't convert nil into String (TypeError) from /usr/lib/ruby/gems/1.8/gems/capistrano-2.5.17/lib/capistrano/recipes/deploy.rb:55:in `load'

  Read the article

• How do I get GNU screen not to start in my home directory in OS X?

  - by Benjamin Oakes

  GNU Screen (screen) behaves differently on OS X 10.5 (Leopard) and 10.6 (Snow Leopard) compared to Linux (at least Ubuntu, Red Hat, and Gentoo) and OS X 10.4 (Tiger). In 10.5 and 10.6, new screens (made with screen or ^A c) always places me in my home directory ~. In Linux and OS X Tiger, new screens have a pwd of wherever the screen was created originally. Made up examples to illustrate what I mean: Tiger: $ cd ~/foo $ pwd /Users/ben/foo $ screen $ pwd /Users/ben/foo $ screen # or ^A c $ pwd /Users/ben/foo Leopard, Snow Leopard: $ cd ~/foo $ pwd /Users/ben/foo $ screen $ pwd /Users/ben $ screen # or ^A c $ pwd /Users/ben How do I get Leopard and Snow Leopard to behave like Tiger used to?

  Read the article

• Can't re-install OS on Asus Eee PC 1018P

  - by cornerback84

  My friend has an Asus Eee PC 1018P. It has no CD/DVD drive (neither does he have a USB CD/DVD drive). The OS wasn't working fine, so we decided to restore the system using the provided OS backup from HD. But mid way through the installation it was interrupted and the computer was restarted (not a hardware or software issue – we did it). Now we cannot run the backup and we also tried to install Windows 7 through USB, but as soon as we start to install the OS, it says that some device driver is missing. It turns out that the OS needs a USB device driver to continue. It has USB 3.0 – maybe that's why the OS needs the driver. I tried disabling 3.0 and enabling 2.0 but then it does not boot from USB drive for some reason. We are stuck with this. The backup doesn't run and when booting from USB, it says that it needs a device driver. Anyone has any idea what we could do?

  Read the article

• mount_afp on linux, user rights

  - by Antonio Sesto

  I need to mount a remote filesystem on a linux box using the afp protocol. The linux box runs an old Debian 4. I downloaded the source code of mount_afp, compiled it and installed it with all the required packages. Then created /etc/fuse with the following command: mknod /dev/fuse c 10 229 (according to the instructions here) I can mount the remote filesystem as root by executing: mount_afp afp://USER:PASSWD@REMOTE_SERVER/FOLDER /mnt/MOUNTPOINT/ but the same command fails when run as normal user (of the local machine). After reading here and there, I created a group fuse, and added my normal user U to the group fuse: [prompt] groups U U fuse Then modified the group of /dev/fuse, that now has the following rights: 0 crwxrwx--- 1 root fuse 10, 229 Feb 8 15:33 /dev/fuse However, if the user U tries to mount the remote filesystem by using the same command as above, U gets the following error: Incorrect permissions on /dev/fuse, mode of device is 20770, uid/gid is 0/1007. But your effective uid/gid is 1004/1004 But the user U with uid 1004 has also gid 1007 (group fuse). I might think the problem is related to real/effective/etc. ID, but I do not know how to proceed and could not find any clear instructions. Could you please help me? There is also another problem. If I mount /mnt/MOUNTPOINT as root and run ls -l /mnt, I get: drwxrwxrwx 15 root root 466 Feb 8 16:34 MONTPOINT If I run ls -l /mnt as normal user U I get: ? ?????????? ? ? ? ? ? MOUNTPOINT in fact when I try to cd /mnt/MOUNTPOINT I get: $-> cd /mnt/MOUNTPOINT -sh: cd: /mnt/MOUNTPOINT: Not a directory Then I unmount /mnt/MOUNTPOINT as root and run again ls -l /mnt as normal user U I get: 0 drwxr-xr-x 2 root root 6 Feb 8 15:32 MOUNTPOINT/ After reading Frank's answer, I killed every shell/process running with privileges of user U. Still U cannot mount the remote filesystem, but the error message has changed. Now it is: "Login error: Authentication failed". The problem is not related to remote login/password since the same command works perfectly when run as root of the local machine. Since I cannot get mount_afp to work with normal users, I decided to follow mgorven's suggestion. So I run the commands: mount_afp -o allow_other afp://USER:PASSWD@REMOTE_SERVER/FOLDER /mnt/MOUNTPOINT/ and mount_afp -o user=U afp://USER:PASSWD@REMOTE_SERVER/FOLDER /mnt/MOUNTPOINT/ The mount succeeds but user U cannot access the mount point. If U executes ls -l in /mnt U@LOCAL_HOST [/mnt] $-> ls -l ls: cannot access MOUNT_POINT: Permission denied total 0 ? ?????????? ? ? ? ? ? MOUNT_POINT Is it so hard to have this utility working?

  Read the article

• Git - post-receive hook with git pull "Failed to find a valid git directory"

  - by ludicco

  It's very weird but when setting a git repository and creating a post-receive hook with: echo "--initializing hook--" cd ~/websites/testing echo "--prepare update--" git pull echo "--update completed--" the hook runs indeed, but it never manage to run git pull properly: 6bfa32c..71c3d2a master -> master --initializing hook-- --prepare update-- fatal: Not a git repository: '.' Failed to find a valid git directory. --update completed-- so I'm asking myself now, how it's possible to make the hook update the clone with post-receive? in this case the user running the processes is the same, and its everything inside the user folder so I really don't understand...because if if I go manually into cd ~/websites/testing git pull it works without any problem... any help on that would be pretty much appreciated Thanks a lot

  Read the article

• Running Batch File As An Administrator…

  - by WidmarkRob

  I successfully created a batch file to flush my DNS. I have added a pause, I noticed in the title bar of the console window… It's not running as administrator. I've already tried a couple of variations of this… Just a little guidance would be most appreciated. I remember reading a blog somewhere, it said something about capitalization wasn't important… Is camel casing important in writing batch files? @echo off echo. pause CD.. CD.. echo. runas /user:<Administrator> ipconfig /flushdns echo. pause echo.

  Read the article

• Simple bash scripting

  - by Richard Cotton

  I'm trying to get to grips with bash scripting via cygwin. My script is about as simple as it gets. I change the directory to the root of my C drive, and print the new location. #!/usr/bin/bash cd /cygdrive/c pwd is saved in the file chdir.sh in my home directory. I then call ./chdir.sh from the bash prompt. This results in the error : No such file or directorygdrive/c /cygdrive/c/Documents and Settings/rcotton I definitely have a C drive, and the command cd /cygdrive/c works when I call it directly from the bash prompt. I realise that this problem is likely stupidly simple; please can you tell me what I'm doing wrong.

  Read the article

• Fedora 16 can connect to samba share using smbclient but not in nautilus 3.2.1

  - by Nathan Jones

  I have a machine running Ubuntu 11.10 Server acting as a Samba server to share my home directory. Everything works fine on my Windows 7 machine, but on my Fedora 16 laptop, if I use Nautilus to try to access the share using smb://192.168.0.8/nathan in the location bar, it just has the loading cursor and does nothing. It never shows any errors, nothing. Using smbclient works just fine, but I'd like to get it working in Nautilus. I know that there can be problems with SELinux and Samba, so I created a file called booleans.local that contains samba_enable_home_dirs=1. My smb.conf file looks like this: # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. pam password change = yes # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections map to guest = bad user ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones usershare allow guests = yes #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username [homes] comment = Home Directories browseable = yes # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. read only = no # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0775 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0775 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = no create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom smbusers: <nathan> = <"nathan"> Any help would be very much appreciated! Thanks!

  Read the article

• how change nginx temp & log folder or disable logging completely

  - by Ehsan Khodarahmi

  I'm running nginx 1.3.5 under windows seven, I need to execute nginx directly from a read-only media (CD or DVD), but when I want to run it, it fails with this error: nginx: [alert] could not open error log file: CreateFile() "logs/error.log" fail ed (5: Access is denied) 2012/08/28 13:52:46 [emerg] 5604#2864: CreateDirectory() "J:\nginx-1.3.5/temp/client_body_temp" failed (5: Access is denied) where J is my CD-ROM drive letter. I've changed nginx.conf to disable logging completely, but seems anyway it still tries to build a file named 'error.log' in '/logs' folder & some extra temporary contents in '/temp' folder at the startup, so I want to change 'logs' & 'temp' directory path to windows temp folder (%temp%), but I dont have any idea that how can I do it. Also I want to know why nginx still creates 'logs/error.log' after disableing error logging ?

  Read the article

• Acer Aspire 1360 Recovery CDs

  - by John

  I have replaced a dead hard disk in an out of warranty Acer Apire 1360 laptop. The two recovery CDs I have dont appear to be bootable, they just contain .hdd and .ghs (image?) files. On the original broken hard drive there was a hidden partition which could be invoked by pressing alt+f10 when booting. You would then be prompted for the 2 recovery CDs to perform the restore. Obviously the new hard drive does not contain the hidden Acer recovery partition. This being the case, how do I go about restoring Win XP? The 2 CDs are called Aspire 1360/1520 Serires Recovery CD Disk 1 of 2 and 2 of 2. Am I missing a futher bootable recovery CD? Can anyone confirm how many restore CDs originally came with the laptop.

  Read the article

• setting up a shared folder in linux

  - by Chris

  I'm trying to set up a folder in my home directory that will be shared with another user but for some reason it is not working this is what I've done, I have tried two different ways using ACL's and chown/chgrp etc I set up a group called say: sharedgroup and added both my user (john) and fred to it so when I run groups john john wheel sharedgroup groups fred sharedgroup fred mkdir /home/john/shared vim /home/john/shared/hello.txt (typed in some text saved it) chown -R :sharedgroup shared chmod -R o=-rwx shared ll drwxrwx--- 2 john sharedgroup 4096 Sep 9 21:14 shared ll shared -rw-rw-r-- 1 john sharedgroup 7 Sep 9 21:14 hello.txt (I also tried adding in the s permissions but that didn't help either) then when I log out of the server and log back in as fred and try these commands they fail vim /home/john/shared/hello.txt (won't allow me to write opens a blank file) cd /home/john/shared -bash: cd: /home/john/cis: Permission Denied ls /home/john/shared -ls: /home/john/shared: Permission Denied ls -lad /home/john/shared -ls: /home/john/shared: Permission Denied id fred uid=500(fred) gid=502(sharedgroup) groups=502(sharedgroup),500(fred) context=user_u:system_r:unconfined_t Any idea what I'm doing wrong??

  Read the article

• Can Linux file permissions be fooled?

  - by puk

  I came across this example today and I wondered how reliable Linux file permissions are for hiding information $ mkdir fooledYa $ mkdir fooledYa/ohReally $ chmod 0300 fooledYa/ $ cd fooledYa/ $ ls >>> ls: cannot open directory .: Permission denied $ cd ohReally $ ls -ld . >>> drwxrwxr-x 2 user user 4096 2012-05-30 17:42 . Now I am not a Linux OS expert, so I have no doubt that someone out there will explain to me that this is perfectly logical from the OS's point of view. However, my question still stands, is it possible to fool, not hack, the OS into letting you view files/inode info which you are not supposed to? What if I had issued the command chmod 0000 fooledYa, could an experienced programmer find some round about way to read a file such as fooledYa/ohReally/foo.txt?

  Read the article

• What usb-bootable utility should I use to copy SATA hard drives?

  - by Steve Brown

  I have a computer that only has two SATA connections and I need to copy one SATA hard drive to another. Since I have to unplug the CD drive to copy the drives I need a USB-bootable utility. I have an old school copy of Norton Ghost (CD based): Ghost has always worked well for me in the past - I see there is a new "version 15" out but I'm not sure if it is worth buying. A friend has Acronis True Image on a USB drive: We tried to use that on the computer but it was unable to copy both partitions (restore partition and main partition). Of course there may be some problem with the drive that is keeping Acronis from working (it is just exiting with a lame error about not being able to copy the disks and no error code or detailed information), but I'm interested in knowing if there is a better, more solid, or widely used solution that I should invest in. What usb-bootable utilities can I use to copy SATA hard drives?

  Read the article

• Free MP3 merge for Mac OS X

  - by Lilly

  Hi, I need to merge several MP3 tracks into one, I use Mac OS X 10.5. I want to convert all my Harry Potter CDs to my iPod, but not every minute a new track (as it is on the CDs) but chapterwise. Where can I get a free software? Help, please! (I've already tried: Jfuse, but after I had merged a few chapters it said I had to buy it; emicsoft VOB Converter for Mac; File Stitcher; but since they all were shareware, for free they would only let me merge 2 files at once (that would take me days) or half of each file which is useless of course; iTunes advanced settings ("join CD tracks") when importing the CDs, but it would let me only join the complete CD, not chapters...) (Sorry for my English, hope you could understand what I wanted to say)

  Read the article

• Cannot install passenger with Nginx

  - by Luc

  Hello, I have a rack application that I want to migrate from Ruby 1.8.7 + Apache + passenger to Ruby 1.9.1 + Nginx + passenger. I have made up the following script for a quick install all in one, and it raises an error... Here is the installation script: (basic one with all the steps I need to install everything on a Ubuntu 10.04 Lucid Lynx fresh box) Nginx sources cd /tmp wget http://nginx.org/download/nginx-0.7.66.tar.gz tar xzf nginx-0.7.66.tar.gz cd nginx-0.7.66 openssl required for SSL/TLS sudo apt-get install openssl sudo apt-get install libssl-dev Compilation stuff sudo apt-get zlib1g-dev Ruby interpreter 1.9.1 sudo apt-get install ruby1.9.1 ruby1.9.1-dev rubygems1.9.1 irb1.9.1 ri1.9.1 rdoc1.9.1 build-essential nginx libopenssl-ruby1.9.1 Make sure default ruby uses version 1.9.1 sudo update-alternatives --install /usr/bin/ruby ruby /usr/bin/ruby1.9.1 400 --slave /usr/share/man/man1/ruby.1.gz ruby.1.gz /usr/share/man/man1/ruby1.9.1.1.gz --slave /usr/bin/ri ri /usr/bin/ri1.9.1 --slave /usr/bin/irb irb /usr/bin/irb1.9.1 --slave /usr/bin/rdoc rdoc /usr/bin/rdoc1.9.1 sudo update-alternatives --config ruby Passenger (rake-0.8.7, fastthread-1.0.7, rack-1.1.0, passenger-2.2.14) sudo gem install passenger Activate Passenger in nginx, select option 2 to use nginx sources donwloaded above cd /var/lib/gems/1.9.1/gems/passenger-2.2.14/bin sudo ./passenger-install-nginx-module And this is the error message I got: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/ContentHandler.c gcc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Wunused-function -Wunused-variable -Wunused-value -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I /tmp/pcre-8.00 -I objs -I src/http -I src/http/modules -I src/mail \ -o objs/addon/nginx/StaticContentHandler.o \ /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c: In function ‘passenger_static_content_handler’: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c:71: error: ‘ngx_http_request_t’ has no member named ‘zero_in_uri’ make[1]: *** [objs/addon/nginx/StaticContentHandler.o] Error 1 make[1]: Leaving directory `/tmp/nginx-0.7.66' make: *** [build] Error 2 -------------------------------------------- It looks like something went wrong Please read our Users guide for troubleshooting tips: /var/lib/gems/1.9.1/gems/passenger-2.2.14/doc/Users guide Nginx.html I do not understand the reason of this error. Is this a compatibility problem ? Hope you have any clues :) Thanks a lot, Luc

  Read the article

• Free mp3 merge for Mac OSX

  - by Lilly

  Hi, I need to merge several mp3 tracks into one, I use MAC OS X 10.5. I want to convert all my Harry Potter CDs to my iPod, but not every minute a new track (as it is on the CDs) but chapterwise. Where can I get a free software? Help, please! (I've already tried: Jfuse, but after I had merged a few chapters it said I had to buy it; emicsoft VOB Converter for MAC; File Stitcher; but since they all were shareware, for free they would only let me merge 2 files at once (that would take me days) or half of each file which is useless of course; iTunes advanced settings ("join CD tracks") when importing the CDs, but it would let me only join the complete CD, not chapters...) (Sorry for my English, hope you could understand what I wanted to say)

  Read the article

• git init --bare permission denied on 16gb USB stick

  - by Sour Lemon

  I am using GIT on a Windows 7 machine (64 bit) and have been learning how to use GIT to version control my files. Now I want to be able to create a --bare repository on an external device (in this case a 16gb USB stick) but unfortunately when I try to create a --bare repository on it I get the following error: f:/: Permission denied I am using the GIT Bash program which is installed with GIT on Windows machines, so these are the commands I am typing in (I am also opening the program as administrator by holding ctrl + shift when I open it) cd /f git init --bare f:/: Permission denied However if I create a normal repository it works just fine: cd /f git init Initialized empty repository in f:/.git/ Can anybody shed some light on why I can't create a --bare repository? Any help would be much appreciated.

  Read the article

• Testing home directory scripts by setting $HOME to the location of the test directory

  - by intuited

  I have an interdependent collection of scripts in my ~/bin directory as well as a developed ~/.vim directory and some other libraries and such in other subdirectories. I've been versioning all of this using git, and have realized that it would be potentially very easy and useful to do development and testing of new and existing scripts, vim plugins, etc. using a cloned repo, and then pull the working code into my actual home directory with a merge. The easiest way to do this would seem to be to just change & export $HOME, eg cd ~/testing; git clone ~ home export HOME=~/testing/home cd ~ screen -S testing-home # start vim, write/revise plugins, edit scripts, etc. # test revisions However since I've never tried this before I'm concerned that some programs, environment variables, etc., may end up using my actual home directory instead of the exported one. Is this a viable strategy? Are there just a few outliers that I should be careful about? Is there a much better way to do this sort of thing?

  Read the article

• Amazon ec2 folder missing

  - by CQM

  To set permissions on the settings file On your Amazon EC2 instance, at a command prompt, use the following command to set permissions: sudo chmod 666 /var/www/html/sites/default/settings.php except I don't have a www folder in my instance [ec2-user@ip-10-242-118-215 ~]$ cd / [ec2-user@ip-10-242-118-215 /]$ ls bin cgroup etc lib local media opt root selinux sys usr boot dev home lib64 lost+found mnt proc sbin srv tmp var [ec2-user@ip-10-242-118-215 /]$ cd var [ec2-user@ip-10-242-118-215 var]$ ls account db games local log nis preserve run tmp cache empty lib lock mail opt racoon spool yp Please advise, did I forget to install something that the amazon instructions assumed I knew about? Running 64bit Amazon linux ami march 2012 I feel like the webserver is missing?

  Read the article

• Solaris10 x86 mirror. Making second disk booteable when failure

  - by Kani

  Did a mirror (RAID1) with Solaris 10 in x86. Everything OK. Now, I´m trying to make the second disk booteable, this is: from grub or in case of failure of disk1. I edited /boot/grub/menu.lst: #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris 10 9/10 s10x_u9wos_14a X86 findroot (rootfs1,0,a) kernel /platform/i86pc/multiboot module /platform/i86pc/boot_archive #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot -s module /boot/amd64/x86.miniroot-safe #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe #---------------------END BOOTADM-------------------- #Make second disk booteable!!!!!!! title alternate boot findroot (rootfs1,1,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe But is not working. In the BIOS, when I select "alternate boot" I get: Error 15: 15 file not found also, how to configure to GRUB to make the disk2 to boot in case of error in disk1? Additionally, I did (but not related to GRUB): eeprom altbootpath=/devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a Here is the output of some commands that may help you: /sbin/biosdev 0x80 /pci@0,0/pci108e,5352@1f,2/disk@0,0 0x81 /pci@0,0/pci108e,5352@1f,2/disk@1,0 ls -l /dev/dsk/c1t?d0s0 lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t0d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@0,0:a lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t1d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a more /boot/solaris/bootenv.rc setprop ata-dma-enabled '1' setprop atapi-cd-dma-enabled '0' setprop ttyb-rts-dtr-off 'false' setprop ttyb-ignore-cd 'true' setprop ttya-rts-dtr-off 'false' setprop ttya-ignore-cd 'true' setprop ttyb-mode '9600,8,n,1,-' setprop ttya-mode '9600,8,n,1,-' setprop lba-access-ok '1' setprop prealloc-chunk-size '0x2000' setprop bootpath '/pci@0,0/pci108e,5352@1f,2/disk@0,0:a' setprop keyboard-layout 'US-English' setprop console 'text' setprop altbootpath '/pci@0,0/pci108e,5352@1f,2/disk@1,0:a' cat /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - #/dev/dsk/c1t0d0s1 - - swap - no - /dev/md/dsk/d1 - - swap - no - /dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no - /devices - /devices devfs - no - sharefs - /etc/dfs/sharetab sharefs - no - ctfs - /system/contract ctfs - no - objfs - /system/object objfs - no - swap - /tmp tmpfs - yes - df -h Filesystem size used avail capacity Mounted on /dev/md/dsk/d0 909G 11G 889G 2% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 14G 972K 14G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab /usr/lib/libc/libc_hwcap1.so.1 909G 11G 889G 2% /lib/libc.so.1 fd 0K 0K 0K 0% /dev/fd swap 14G 40K 14G 1% /tmp swap 14G 28K 14G 1% /var/run

  Read the article

• Como instalar Windows (x86/x64) sobre Linux (Ubuntu)

  - by yorrany

  I installed Ubuntu edition (10.04) on my windows 7, completely eliminating it to the original installation. After I was forced to reverse the process, but could not find tools or explanations of how to do it. To clarify the equipment, it is: a netbook, acer, no optical drive cd / dvd, the process should be fully via USB. I hope I was clear enough, count on the support of you. Thank you. -- Instalei a edição Ubuntu (10.04) sobre meu Windows 7, eliminando completamente a a instalação original. Depois fui forçado à reverter o processo, mas não encontrei ferramentas ou explicações de como fazê-lo. Para esclarecer sobre o equipamento, trata-se de: um netbook, acer, sem leitor óptico de cd/dvd, o processo deverá ser totalmente via USB. Espero ter sido bastante claro, conto com o suporte de vocês. Muito obrigado.

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >