Search Results

Search found 3567 results on 143 pages for 'instructions'.

Page 55/143 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• SSIS DSN Not Showing as ODBC Data Source

  - by user1114330

  I have been following the directions here: http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/05ccd778-b78c-4a83-a10a-c4ae412cc6e4 And ran into a problem where my System DSN is not showing up as a ODBC provider. I found this which seemed promising: http://support.microsoft.com/kb/2000277 I was not able to delete the key but followed but I did what was suggested: "If unable to delete the key, double-click the key and erase the Data value entered. Once done, the value should read ' (value not set) '" However, after following the instructions my System DSN still does not appear as an option. The USER DSN however does show...has shown but does not work as I get a permissions error. Any ideas?

  Read the article

• ADSL connetion (BSNL dataone) with puppy Linux

  - by Vaibhav Garg

  I have an old PC which I want to use for internet browsing. I tried using Puppy Linux (version 4.3.1) for the same but have not been able to connect. I connect via PPPoE. My network card is RTL 8029b which is automatically detected by Puppy Linux. However, the LED indicator on the MODEM designating LAN connectivity stays off. This post is being typed from the same PC running XP, so there are no connection issues. I am a complete newbie for Linux. can somebody point me to instructions. I will be willing to give any more information if required. P.S. My MODEM is Huewei Smartax MT 882 Thanks

  Read the article

• Performance Alert Writing to event Log but not running program

  - by TooFat

  I followed the instructions here How to create and configure performance alerts in Windows Server 2003 to set up an alert if the available logical disk space on one of my drives goes below a certain number. I selected the option to write to the application event log and select the "run this program" option and put in the path to a script that sends me an email. If I copy the path to the script and run it everything works and I get the email. When I start the alert I can see that the limit I set is being exceeded and the logs are being written to the application log, but the email is never being sent. I have the runas user and pword set to a Domain Admin. If I make the "run this program path" to C:\Windows\System32\calc.exe" it also doesn't start up the calculator. The Performance Logs and alerts services is running as Local Admin with allow to interact with desktop. What am I doing wrong?

  Read the article

• How to add in in appendix page numbers separately from the regular heading page numbers

  - by O_O

  I had regular page numbers on my Microsoft Word 2007 document at the bottom center of my page, starting from 1 from Insert tab Page Number Bottom of page Plain Number 2. I added an appendix with Heading 6 and followed the instructions from http://support.microsoft.com/kb/290953 to create separate page numbers just for the appendix, i.e. A-1, A-2, B-1, B-2, etc. The Page Number Format configuration I did is here: ]When I try to set this however, it changes all of the page numbers to this format, even the ones that aren't from heading 6 (meaning it changes the non-appendix content to this page number format). Here's another example: 1 Heading1 has page number A-4 (note it starts at A-1 at the title page) ... Appendix A has page number A-12 I would like to change it so that 1 Heading1 has page number 4 (note it starts at 1 at the title page) ... Appendix A has page number A-1 Anyone know why this is happening? Thank you!!

  Read the article

• VirtualBox 4.1.20 (Windows 7 / Ubuntu 12.04 (32 bit)) copy/paste is broken

  - by user1628257

  I have a Windows 7 Pro host, and Ubuntu 12.04 LTS guest. I cannot get the shared clipboard working. I have installed Guest Additions 4.1.20 on VirtualBox 4.1.20, have restarted, followed instructions found at http://www.virtualbox.org/manual/ch04.html#idp18411760, and have enabled bidirectional clipboard sharing within VirtualBox options. However, I still cannot copy and paste between the host and guest. Copy/paste works great within the host, and within the guest, but not between the two. I'm out of ideas.

  Read the article

• Upgrading openSUSE 11.1 with Plesk Panel 9.3 to PHP 5.3

  - by Jonathan

  I'm running a VPS with openSUSE 11.1 (i586). On the VPS is Parallels Plesk Panel 9.3.0 installed. The current PHP-version is PHP 5.2.11. I want to upgrade PHP to PHP 5.3, but I can't find good instructions on how to do this. If I check for updates in Zypper, it says this is the latest release. In the Plesk Updates isn't an update either, both via the webbased interface and the command line interface. On Software.openSUSE.org I can find packages for PHP 5.3.1 in both the server:php/server_apache_openSUSE_11.1-repo and the server:php/openSUSE_11.1-repo (can't post the link because I'm a newbie here). But if I add one of those to Zypper, I still don't see an update. Is there here somebody who knows how to do this? And is it completely safe to update that way? I don't want to end up with a broken VPS... Thanks! Jonathan

  Read the article

• Cannot get git working

  - by Devin Dixon

  I'm trying to install my own git server with these instructions. http://cisight.com/how-to-setup-git-server-using-gitolite-in-ubuntu-11-10-oneiric/ But I am get stuck at this point. git clone --verbose [email protected]:testing.git Cloning into 'testing'... Permission denied (publickey). fatal: The remote end hung up unexpectedly And I think it has something to do with this: gitolite@ip-xxxx:~$ gl-setup tmp/john.pub key_read: uudecode Aklkdfgkldkgldkgldkgfdlkgldkgdlfkgldkgldkgdlkgkfdnknbkdnbkdnbkdnbkfnbkdfnbkdnfbkdfnbdknbkdnbkfnbkdbnkdbnkdfnbkd [email protected] failed fprint failed I always get the fail and I think its preventing me from cloning repo.The repo is there along with gitolite-admin.git repo. The permissions are this: drwxr-x--- 8 gitolite gitolite 4096 Jun 6 16:29 gitolite-admin.git drwxr-x--- 7 gitolite gitolite 4096 Jun 6 16:29 testing.git So my question is what am I missing here?

  Read the article

• Webserver: chrooted PHP gives mysql.sock error when attempting to reach mysql

  - by Jon L.

  Hey guys, I've configured an Ubuntu webserver with Nginx + PHP5-FPM. I've created a chrooted environment (using jailkit) that I'm tossing my developers into, from where they can develop their test applications. Chroot jail: /home/jail Nginx and PHP5-FPM run outside the chroot, but are configured to function with websites within the chrooted environment. So far, Nginx and PHP5-FPM are serving up files without issue, except for the following: When attempting to connect to MySQL, we receive this error: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' Now, I believe the issue is due to the non-chrooted php.ini referencing mysqld.sock outside of the chroot environment (it's actually using the MySQL default setting currently). My question is, how can I configure PHP to access MySQL via loopback or similar? (Found that as a suggestion in a google result, but without any instructions) Or if I'm missing some other obvious setting, let me know. If there's an option of creating a hardlink (that would remain available even if mysql is restarted), that would be handy as well.

  Read the article

• Using Windows 7 drivers in Windows Server 2008 R2

  - by Robert Koritnik

  Maybe I should post this to http://www.serverfault.com. Windows 7 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 doesn't event though it's practically the same OS when it comes to drivers. But I know that this has a very good reason. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are normally desktop machines and would need Windows 7 driver spectrum... Question I know I've been reading about some trick on the internet that first installed Windows 7 on the machine, than do something to get either all Windows 7 driver collection or just those installed, and then install Windows Server 2008 and use those drivers. The thing is: I can't seem to find these instructions on the internet any more. If anybody knows where these are please provide the link for the rest of us.

  Read the article

• Amazon EC2 Creating Tunnel with OpenVPN

  - by nocode

  I have followed these instructions: http://aws.amazon.com/articles/0639686206802544 I can ping the VPN endpoints and I have the corresponding VPC CIDR pointing to the EC2 instance in the route table. Here is my config: port 1194 proto udp dev tun # Remote peer and network remote Elastic_IP route 10.0.0.0/16 # Configure local and remote VPN endpoints ifconfig 169.254.255.1 169.254.255.2 # The pre-shared static key secret /etc/openvpn/ovpn.key keepalive 10 120 persist-key persist-tun log /var/log/openvpn.log verb 3 When I look at my logs, I get this error: RESOLVE: Cannot resolve host address: 10.0.0.0/16: Name or service not known OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.0/16 in VPC1, the CIDR is 172.31.0.0/16 which is targeting the EC2 instance also running OpenVPN. I'm getting the same error from the Instance in VPC2 with the corresponding CIDR. Just for testing, i stopped the IPTABLES service I am running the Amazon linux AMI image (x64) as specified in the article I linked.

  Read the article

• OfficeLive email settings - Authorization Failed

  - by serhio

  Is there anybody who tried creating emails with Microsoft's OfficeLive I wonder how to add a created office live e-mail to Outlook? By e.g. my LiveId is [email protected], password: pmegmailcom officeLive site: www.mysite.com, email: [email protected], password: pcontactmysitecom I do new mail account in Outlook: Your name: MySiteTeam; Email address: [email protected] Incoming mail server: pop3.live.com; Outgoing mail server: smtp.live.com User Name: [email protected]; Password: pmegmailcom My outgoing server requires authentication - Yes Use same settings as my incoming mail server - Yes Pop3 port: 995 (SSL - Yes), Smtp port: 587 (SSL - Yes) In fact, I follow the following office live forum moderators instructions. When testing finds POP3 server, finds SMTP server, does not pass authorization. What I do wrong?

  Read the article

• Unlocking AMD Phenom II X2 550 Black Edition cores - what are the risks?

  - by Vilx-

  I've got the above mentioned CPU and a GigaByte GA-MA790XT-UD4P motherboard, which should be capable of unlocking the extra two cores - if I'm lucky and they're not faulty. The Internet is full of instructions on how to do that. What I don't have is spare money to buy new hardware if I brick something. What are the risks when attempting to do this? Is it completely safe, or can I be left with an expensive pile of junk? What should I keep in mind when doing so? Bigger cooler maybe (I'm running with the default box cooler)? Should I lower the frequencies too? I've never done any OC before.

  Read the article

• Why isn't sox able to convert to mp3?

  - by marue

  I installed Sox, i installed lame-398, but sox is not able to convert any file to mp3. It fails with the messages: ./../sox FAIL util: Unable to load LAME encoder library (libmp3lame). ./../sox FAIL formats: can't open output file `funktech.mp3': How can i check if lame has been installed correct? How can i get sox to find the mp3Library? edit: I did not install sox at all, it works without installing directly from the commandline. Lame was installed by following the instructions on their site: ./configure make make install which results in the following files being found in /usr/local/lib/ : libmp3lame.dylib, libmp3lame.la, libmp3lame.a Maybe symlinking libmp3lame.la, which is marked as executable, to /usr/bin would help?

  Read the article

• Finding out what user Apache is running as?

  - by Anna

  I want to secure a file upload directory on my server as described beautifully here, but I have one problem before I can follow these instructions. I don't know what user Apache is running as. I've found a suggestion that you can look in httpd.conf and there will be a "User" line, but there is no such line in my httpd.conf file, so I guess Apache is running as the default user. I can't find out what that is, though. So, my question is (are): how do I find out what the default user is do I need to change the default user if the answer is yes and I change the default user by editing httpd.conf, is it likely to screw anything up? Thanks! ----- UPDATE ------ Seems to have been answered here. Sorry, I got told off on StackOverflow and told to post it here, then posted it here, then it got answered on StackOverflow anyway!

  Read the article

• Installing Win8 from ISO image error

  - by eco_bach

  I installed a new SSD in my PC laptop which came with an OEM version of Windows 8. After trying unsuccesfully to get the OEM version of Windows onto the SSD drive I gave up and purchased and downloaded a NEW copy of Windows 8. After that I created an ISO image on my desktop machine and followed the instructions here to create a bootable USB flash drive. However, after going through the boot install process with the USB flash drive on my laptop I get the following message 'The product key entered does not match any of the Windows images available for installation. Enter a different product key.' But I wasn't asked to enter any key! Is this because the ISO image was created on a different machine? I really don't get why this should be so difficult.

  Read the article

• Asus G53SX How to use the recovery partition

  - by Amento

  I am trying to use the recovery partition on my Asus G53SX laptop, but the instructions in the included booklet don't match up with what happens on the computer. It says press F9 during bootup and then press ENTER to select windows setup. Then select the language you want to recover, and so on. When I press F9 I end up in the boot manager and from there I can access safe mode and all these things. The closest thing I can find in this list is "Repair your computer" but this menu takes me to recovery points and backup images, none which are mentioned in the booklet. How can I use the recovery partition to restore my laptop to factory state?

  Read the article

• Couple folders went 'access denied' in Windows. Why and how to fix?

  - by Nathaniel

  So, after a failed Windows 7 install, I put XP back on, and had a adrenaline shot when I got an access denied on a couple of my backed up folders. I already tried the instructions here at Microsoft KB, but it didn't fix it. I did add myself with full permissions on the main section of the Security tab, though, and that gave me access into the folder (I could do it in XP Home because of the Windows NT SP4 Security Configuration Manager). However, it appears some subfolders are still inaccessible. Two questions, then. Why exactly did this happen and how do I fix it?

  Read the article

• Linksys WRT54Gx as Repeater Bridge

  - by Robert Koritnik

  I have a Linksys WRT54Gx router with DD-WRT software working fine. But. Is it possible to use it as a Repeater Bridge when the host router isn't configured to be in the default 192.168.1.1 subnet? I've set everything from these instructions. I've also tried setting repeater router's IP address to be inside host's subnet, setting Gateway + DNS IP addresses... But It still didn't work. Client machines connecting to second router (my Linksys) were configured to use DHCP and also static IPs within host's subnet. Nothing worked. Can anyone tell me how to configure it to make it work?

  Read the article

• Outlook 2007 VBA/Macro

  - by user27538

  Hi, I am a very basic user new to macros and vba. My problem is that I recive online orders to which i need to click an auto generated unique order hyperlink to confirm receipt of the order within a specified time period. This is a mundane task having to be on 'standby' and was wondering if there was a way to have this link automatically clicked when the email arrives. Just to reiterate the link has a unique reference and is different on each email. Please bare in mind that I am a very basic user and would probably require step by step instructions. Many thanks in advance

  Read the article

• rpm -Uvh & yum install

  - by Nyxynyx

  I am new to linux and wants to understand the reason for using some commands. I am trying to install PostgreSQL on CentOs by following the instructions here. First we do rpm -ivh pgdg-centos91-9.1-4.noarch.rpm which installs the rpm package into the system. But why does it ask us to do yum install postgresql91-server (which i assume installs postgresql) again if we have used rpm -ivh to install the package? Additionally, what is the reason for adding the lines exclude=postgresql* into /etc/yum.repos.d/CentOS-Base.repo under [base] and [updates]. Why is it that we exclude yum from accessing these packages, then use yum to install postgresql91-server?

  Read the article

• How to make a pxe bootable 10MegaByte or larger dos image?

  - by rjt

  Would like to make a "massive" DOS floppy disk image, say 10MegaBytes or more containing all the firmware updates i need for any system, harddrive, BIOS. i do not need the DOS image to be networkable as everything will be on the PXE booted image, but networking would be nice. Since ZipDisks were attached to the floppy disk controller and were over 100MegaBytes, this should be possible. i tried a long time ago to do this and spent too much time on it only to have it fail to boot. So if someone has reliable instructions on how to create such a nightmarish beast and edit it, please let me know. One image that can used for PXE and copied to a USB stick would be a plus. Too bad manufacturers don't supply a single bootable Linux ISO containing all their firmware updates, that would be easy to boot over-the-lan and have networking. HP servers do this and it is awesome.

  Read the article

• Munin Aggregated Graphs Configuration Error

  - by Sparsh Gupta

  I tried making some Munin Aggregated graphs but somehow I am unable to make the configuration work. I think I have followed the instructions but since its not working, I would love some assistance or guidance as to what I am doing wrong. I want to Aggregate (sum) the total number of requests / second all my nginx servers are doing combined together. The configuration looks like [TRAFFIC.AGGREGATED] update no requests.graph_title nGinx requests requests.graph_vlabel nGinx requests per second requests.draw LINE2 requests.graph_args --base 1000 requests.graph_category nginx requests.label req/sec requests.type DERIVE requests.min 0 requests.graph_order output requests.output.sum \ lb1.visualwebsiteoptimizer.com:nginx_request_lb1.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb2.visualwebsiteoptimizer.com_request.request \ lb3.visualwebsiteoptimizer.com:nginx_request_lb3.visualwebsiteoptimizer.com_request.request The munin graph I want to aggregate is http://exchange.munin-monitoring.org/plugins/nginx_request/details Thanks Sparsh Gupta

  Read the article

• Has anyones successfully configured mutt for GMail on FreeBSD? If so, how?

  - by Hank Gay

  I've tried following the instructions here and here. Currently, I can read email from my GMail account, but not send—this is on a personal computer, so even if I configured Sendmail, I doubt any of the mail would survive the spam filter gauntlet. Both guides seem to require the --enable-smtp option for mutt, which I don't think is being exposed by ports. I've tried the mutt and mutt-devel ports and neither seem to give me that option. On a far less important note, I also haven't been able to change folders, e.g., I get told that Sent Mail is not a valid folder when I attempt to go into it. If you can troubleshoot this problem, it's pure gravy. I really only care about sending. Thanks, Hank

  Read the article

• Can a generic drum unit cause a Brother HL-2170w Laser B&W printer print dirty?

  - by marcamillion

  I tried a generic drum & generic toner - and it prints dirty. I also tried cleaning everything per the instructions in the documentation. Could it be a faulty drum unit? Or is it just a generic drum unit issue? I am about to buy a new drum unit, and don't want to buy generic if it will always cause this issue. Thoughts? P.S. I tried new toner cartridges (generic, but I know these work with a 'genuine drum' properly).

  Read the article

• Setting up multiple wireless access points on same network

  - by SqlRyan

  I'd like to add wireless to my network, and I need multiple access points to cover the whole area. I'd like to set them up so that there's only one "wireless network" that the clients see, and it switches them as seamlessly as possible between access points as they wander around (if that's not possible, then at least have it so that they don't need to set up the security by hand on each one the first time, if possible). I've searched online, and there are quite a few sets of mixed instructions (same vs different SSID, frequency, does the security need to match exactly, etc.). Can somebody who has some experience doing this please let me know what they did? I imagine it's pretty simple, but there seems to be no clear cut "yes, you can do this" online, even though I know you can. I have a mid-size LAN with about 20 workstations and two Domain Controllers on it. Also, I'll be doing this with consumer wireless components, if it makes a difference, not enterprise-level components (ie. Linksys rather than Cisco).

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >