Search Results

Search found 12012 results on 481 pages for 'posix api'.

Page 55/481 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• ColdFusion Server crash after thousands of HTTP requests

  - by Jason Bristol

  We are running ColdFusion 8 on a windows server 2003 VPS with an API that exposes student records to a partner API through a connector. Our API returns around 50k student records serialized in XML format pretty seamlessly. My question originates when something very frightening happened today when we tested our connector to our partners API. Our entire website and web host went down. We assumed that our host was just having some issues and after 4 hours with no resolution and no response from their customer service we finally got a response from them claiming that they had an "unauthorized user" in their network. After our server was back up we were unable to connect to our website as if the web service or coldfusion itself had froze. This is really where my concern comes from as I fear we may have overloaded the web service. As I mentioned before we tried sending over 50k HTTP POST requests over to our partner's API, however everything stopped after around 1.6k Is this bad practice or is there some sort of rate limiting I can relax somewhere in server configuration? We managed to find a workaround, but it bypasses our connector which is critical to our design. This would have been a one time deal as the purpose of so many requests was to populate our partner's website with current data, after that hourly syncs will keep requests down to around 100 per hour. UPDATE Our partner API is owned and operated by Pardot. We are converting students to prospects by passing student data to their API which unfortunately only seems to accept one student at a time. For that reason we have to do all 50k requests individually. Our server has 4GB of RAM, an Intel Core 2 Duo @ 2.8GHz running Windows Server 2003 SP2. I monitored the server during a 100 student sync, a 400 student sync, and a 1.4k student sync with the following results: 100 students - 2.25GB of Memory, 30-40% CPU utilization, 0.2-0.3% network bandwidth 400 students - 2.30GB of Memory, 30-50% CPU utilization, 0.2-1.0% network bandwidth 1.4k students - 2.30GB of Memory, 30-70% CPU utilization, 0.2-1.0% network bandwidth I know this is a far cry from 50k students, but I don't want to risk taking down our CMS system again assuming that was the cause. To give you a look at our code: <cfif (#getStudents.statusCode# eq "200 OK")> <cftry> <cfloop index="StudentXML" array="#XmlSearch(responseSTUD,'/students/student')#"> <cfset StudentXML = XmlParse(StudentXML)> <cfhttp url="#PARDOT_CMS_UPSERT#" method="post" timeout="10000" > <cfhttpparam type="url" name="user_key" value="#PARDOT_CMS_USERKEY#"> <cfhttpparam type="url" name="api_key" value="#api_key#"> <cfhttpparam type="url" name="email" value="#StudentXML.student.email.XmlText#"> <cfhttpparam type="url" name="first_name" value="#StudentXML.student.first.XmlText#"> <cfhttpparam type="url" name="last_name" value="#StudentXML.student.last.XmlText#"> <cfhttpparam type="url" name="in_cms" value="#StudentXML.student.studentid.XmlText#"> <cfhttpparam type="url" name="company" value="#StudentXML.student.agencyname.XmlText#"> <cfhttpparam type="url" name="country" value="#StudentXML.student.countryname.XmlText#"> <cfhttpparam type="url" name="address_one" value="#StudentXML.student.address.XmlText#"> <cfhttpparam type="url" name="address_two" value="#StudentXML.student.address2.XmlText#"> <cfhttpparam type="url" name="city" value="#StudentXML.student.city.XmlText#"> <cfhttpparam type="url" name="state" value="#StudentXML.student.state_province.XmlText#"> <cfhttpparam type="url" name="zip" value="#StudentXML.student.postalcode.XmlText#"> <cfhttpparam type="url" name="phone" value="#StudentXML.student.phone.XmlText#"> <cfhttpparam type="url" name="fax" value="#StudentXML.student.fax.XmlText#"> <cfhttpparam type="url" name="output" value="simple"> </cfhttp> </cfloop> <cfcatch type="any"> <cfdump var="#cfcatch.Message#"> </cfcatch> </cftry> </cfif> UPDATE 2 I checked the CF logs and found a couple of these: "Error","jrpp-8","06/06/13","16:10:18","CMS-API","Java heap space The specific sequence of files included or processed is: D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm, line: 675 " java.lang.OutOfMemoryError: Java heap space at java.util.Arrays.copyOf(Arrays.java:2882) at java.io.CharArrayWriter.write(CharArrayWriter.java:105) at coldfusion.runtime.CharBuffer.replace(CharBuffer.java:37) at coldfusion.runtime.CharBuffer.replace(CharBuffer.java:50) at coldfusion.runtime.NeoBodyContent.write(NeoBodyContent.java:254) at cfapi2ecfm292155732._factor30(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm:675) at cfapi2ecfm292155732._factor31(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm:662) at cfapi2ecfm292155732._factor36(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm:659) at cfapi2ecfm292155732._factor42(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm:657) at cfapi2ecfm292155732._factor37(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm) at cfapi2ecfm292155732._factor44(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm:456) at cfapi2ecfm292155732._factor38(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm) at cfapi2ecfm292155732._factor46(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm:455) at cfapi2ecfm292155732._factor39(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm) at cfapi2ecfm292155732._factor47(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm:453) at cfapi2ecfm292155732.runPage(D:\Clients\www.xxx.com\www\dev.cms\api\v1\api.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:192) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:366) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:279) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) Looks like I might have crashed the JVM in CF, is there a better way to do this? We are thinking of just exporting all records initially as a CSV file and importing it into Pardot seeing as we will never have to do a request this large again.

  Read the article

• Google I/O 2012 - Making Google Product Search Work for You Using the Content API for Shopping

  Google I/O 2012 - Making Google Product Search Work for You Using the Content API for Shopping Mayuresh Saoji, Danny Hermes To get the best out of product search, merchants need to provide complete and accurate product information, as well as fresh price and availability data for all products. This session will provide merchants with concrete steps they can take to improve their data quality using the Content API for Shopping. We will provide details on when it makes sense to use the Content API to submit data (as opposed to Feeds), and how to use the API. We will also go into details on how to debug API requests and errors, and talk about general best practices to follow in order to use the API optimally and efficiently. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 35 1 ratings Time: 43:50 More in Science & Technology

  Read the article

• Methodology to understanding JQuery plugin & API's developed by third parties

  - by Taoist

  I have a question about third party created JQuery plug ins and API's and the methodology for understanding them. Recently I downloaded the JQuery Masonry/Infinite scroll plug in and I couldn't figure out how to configure it based on the instructions. So I downloaded a fully developed demo, then manually deleted everything that wouldn't break the functionality. The code that was left allowed me to understand the plug in much greater detail than the documentation. I'm now having a similar issue with a plug in called JQuery knob. http://anthonyterrien.com/knob/ If you look at the JQuery Knob readme file it says this is working code: $(function() { $('.dial') .trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); But as far as I can tell it isn't at all. The read me also says the Plug in uses Canvas. I am wondering if I am suppose to wrap this code in a canvas context or if this functionality is already part of the plug in. I know this kind of "question" might not fit in here but I'm a bit confused on the assumptions around reading these kinds of documentation and thought I would post the query regardless. Curious to see if this is due to my "newbi" programming experience or if this is something seasoned coders also fight with. Thank you. Edit In response to Tyanna's reply. I modified the code and it still doesn't work. I posted it below. I made sure that I checked the Google Console to insure the basics were taken care of, such as not getting a read-error on the library. <!DOCTYPE html> <meta charset="UTF-8"> <title>knob</title> <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/hot-sneaks/jquery-ui.css" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.js" charset="utf-8"></script> <script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js"></script> <script src="js/jquery.knob.js"></script> <div id="button1">test </div> <script> $(function() { $("#button1").click(function () { $('.dial').trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); }); </script>

  Read the article

• Web Speech API franchit un nouveau cap, la spécification JavaScript permettra d'intégrer la reconnaissance vocale dans les pages Web

  La spécification Web Speech API franchit un nouveau cap l'API JavaScript permet d'intégrer la reconnaissance vocale dans les pages Web La spécification Web Speech API vient de franchir une étape importante dans sa normalisation. Le groupe de travail Web Speech API du W3C a récemment publié le futur standard avec un appel des membres pour un accord de la spécification finale. Cette spécification décrit une API JavaScript qui permettra aux développeurs d'intégrer la reconnaissance vocale dans les pages Web. Grâce à cette API, les développeurs pourront utiliser des Scripts pour générer du texte à partir des paroles, utiliser la reconnaissance vocale comme entrée pour l...

  Read the article

• Using oauth2_access_token to get connections in linkedIn

  - by Pedro

  I'm trying to get the connections in linkedIn using their API, but when I try to retrieve the connections I get a 401 unauthorized error. in the official documentation says You must use an access token to make an authenticated call on behalf of a user Make the API calls You can now use this access_token to make API calls on behalf of this user by appending "oauth2_access_token=access_token" at the end of the API call that you wish to make. The API call that I'm trying to do is the following Error -- http://api.linkedin.com/v1/people/~/connections:(id,headline,first-name,last-name)?format=json&oauth2_access_token=access_token I have tried to do it with the following endpoint without any problems. OK -- https://api.linkedin.com/v1/people/~:(id,first-name,last-name,formatted-name,date-of-birth,industry,email-address,location,headline,picture-urls::(original))?format=json&oauth2_access_token=access_token this list of endpoints for the connections API are described here http://developer.linkedin.com/documents/connections-api I just copied and pasted one endpoint from there, so the question is what's the problem with the endpoint for getting the connections? what am I missing? EDIT: for the preAuth Url I'm using https://www.linkedin.com/uas/oauth2/authorization?response_type=code&client_id=ConsumerKey&scope=r_fullprofile%20r_emailaddress%20r_network&state&state=NewGuid&redirect_uri=Encoded_Url https://www.linkedin.com/uas/oauth2/accessToken?grant_type=authorization_code&code=QueryString_Code&redirect_uri=EncodedCallback&client_id=ConsummerKey&client_secret=ConsumerSecret please find attached the login screen requesting the permissions EDIT2: Switched to https and worked like a charm!

  Read the article

• How do I search using the Google Maps API?

  - by Thomas

  Hello all, I'm trying to figure out how to search for nearby businesses in an iPhone app using the Google Maps API. I'm completely new to Javascript, and have waded through some of Google's sample code easily enough. I found how to grab the user's current location. Now I want to search for "restaurants" near that location. I'm just building on the sample code from here. I'll post it below with my changes anyway, just in case. <html> <head> <meta name="viewport" content="initial-scale=1.0, user-scalable=no" /> <meta http-equiv="content-type" content="text/html; charset=UTF-8"/> <title>Google Maps JavaScript API v3 Example: Map Geolocation</title> <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=true"></script> <script type="text/javascript" src="http://code.google.com/apis/gears/gears_init.js"></script> <script type="text/javascript"> var currentLocation; var detroit = new google.maps.LatLng(42.328784, -83.040877); var browserSupportFlag = new Boolean(); var map; var infowindow = new google.maps.InfoWindow(); function initialize() { var myOptions = { zoom: 6, mapTypeId: google.maps.MapTypeId.ROADMAP }; map = new google.maps.Map(document.getElementById("map_canvas"), myOptions); map.enableGoogleBar(); // Try W3C Geolocation method (Preferred) if(navigator.geolocation) { browserSupportFlag = true; navigator.geolocation.getCurrentPosition(function(position) { // TRP - Save current location in a variable (currentLocation) currentLocation = new google.maps.LatLng(position.coords.latitude,position.coords.longitude); // TRP - Center the map around current location map.setCenter(currentLocation); }, function() { handleNoGeolocation(browserSupportFlag); }); } else { // Browser doesn't support Geolocation browserSupportFlag = false; handleNoGeolocation(browserSupportFlag); } } function handleNoGeolocation(errorFlag) { if (errorFlag == true) { // TRP - Default location is Detroit, MI currentLocation = detroit; contentString = "Error: The Geolocation service failed."; } else { // TRP - This should never run. It's embedded in a UIWebView, running on iPhone contentString = "Error: Your browser doesn't support geolocation."; } // TRP - Set the map to the default location and display the error message map.setCenter(currentLocation); infowindow.setContent(contentString); infowindow.setPosition(currentLocation); infowindow.open(map); } </script> </head> <body style="margin:0px; padding:0px;" onload="initialize()"> <div id="map_canvas" style="width:100%; height:100%"></div> </body> </html>

  Read the article

• How do I get a delete trigger working using fluent API in CTP5?

  - by user668472

  I am having trouble getting referential integrity dialled down enough to allow my delete trigger to fire. I have a dependent entity with three FKs. I want it to be deleted when any of the principal entities is deleted. For principal entities Role and OrgUnit (see below) I can rely on conventions to create the required one-many relationship and cascade delete does what I want, ie: Association is removed when either principal is deleted. For Member, however, I have multiple cascade delete paths (not shown here) which SQL Server doesn't like, so I need to use fluent API to disable cascade deletes. Here is my (simplified) model: public class Association { public int id { get; set; } public int roleid { get; set; } public virtual Role role { get; set; } public int? memberid { get; set; } public virtual Member member { get; set; } public int orgunitid { get; set; } public int OrgUnit orgunit { get; set; } } public class Role { public int id { get; set; } public virtual ICollection<Association> associations { get; set; } } public class Member { public int id { get; set; } public virtual ICollection<Association> associations { get; set; } } public class Organization { public int id { get; set; } public virtual ICollection<Association> associations { get; set; } } My first run at fluent API code looks like this: protected override void OnModelCreating(System.Data.Entity.ModelConfiguration.ModelBuilder modelBuilder) { DbDatabase.SetInitializer<ConfDB_Model>(new ConfDBInitializer()); modelBuilder.Entity<Member>() .HasMany(m=>m.assocations) .WithOptional(a=>a.member) .HasForeignKey(a=>a.memberId) .WillCascadeOnDelete(false); } My seed function creates the delete trigger: protected override void Seed(ConfDB_Model context) { context.Database.SqlCommand("CREATE TRIGGER MemberAssocTrigger ON dbo.Members FOR DELETE AS DELETE Assocations FROM Associations, deleted WHERE Associations.memberId = deleted.id"); } PROBLEM: When I run this, create a Role, a Member, an OrgUnit, and an Association tying the three together all is fine. When I delete the Role, the Association gets cascade deleted as I expect. HOWEVER when I delete the Member I get an exception with a referential integrity error. I have tried setting ON CASCADE SET NULL because my memberid FK is nullable but SQL complains again about multiple cascade paths, so apparently I can cascade nothing in the Member-Association relationship. To get this to work I must add the following code to Seed(): context.Database.SqlCommand("ALTER TABLE dbo.ACLEntries DROP CONSTRAINT member_aclentries"); As you can see, this drops the constraint created by the model builder. QUESTION: this feels like a complete hack. Is there a way using fluent API for me to say that referential integrity should NOT be checked, or otherwise to get it to relax enough for the Member delete to work and allow the trigger to be fired? Thanks in advance for any help you can offer. Although fluent APIs may be "fluent" I find them far from intuitive.

  Read the article

• Javascript and Twitter API rate limitation? (Changing variable values in a loop)

  - by Pablo

  Hello, I have adapted an script from an example of http://github.com/remy/twitterlib. It´s a script that makes one query each 10 seconds to my Twitter timeline, to get only the messages that begin with a musical notation. It´s already working, but I don´t know it is the better way to do this... The Twitter API has a rate limit of 150 IP access per hour (queries from the same user). At this time, my Twitter API is blocked at 25 minutes because the 10 seconds frecuency between posts. If I set up a frecuency of 25 seconds between post, I am below the rate limit per hour, but the first 10 posts are shown so slowly. I think this way I can guarantee to be below the Twitter API rate limit and show the first 10 posts at normal speed: For the first 10 posts, I would like to set a frecuency of 5 seconds between queries. For the rest of the posts, I would like to set a frecuency of 25 seconds between queries. I think if making somewhere in the code a loop with the previous sentences, setting the "frecuency" value from 5000 to 25000 after the 10th query (or after 50 seconds, it´s the same), that´s it... Can you help me on modify this code below to make it work? Thank you in advance. var Queue = function (delay, callback) { var q = [], timer = null, processed = {}, empty = null, ignoreRT = twitterlib.filter.format('-"RT @"'); function process() { var item = null; if (q.length) { callback(q.shift()); } else { this.stop(); setTimeout(empty, 5000); } return this; } return { push: function (item) { var green = [], i; if (!(item instanceof Array)) { item = [item]; } if (timer == null && q.length == 0) { this.start(); } for (i = 0; i < item.length; i++) { if (!processed[item[i].id] && twitterlib.filter.match(item[i], ignoreRT)) { processed[item[i].id] = true; q.push(item[i]); } } q = q.sort(function (a, b) { return a.id > b.id; }); return this; }, start: function () { if (timer == null) { timer = setInterval(process, delay); } return this; }, stop: function () { clearInterval(timer); timer = null; return this; }, empty: function (fn) { empty = fn; return this; }, q: q, next: process }; }; $.extend($.expr[':'], { below: function (a, i, m) { var y = m[3]; return $(a).offset().top y; } }); function renderTweet(data) { var html = ''; html += ''; html += twitterlib.ify.clean(data.text); html += ''; since_id = data.id; return html; } function passToQueue(data) { if (data.length) { twitterQueue.push(data.reverse()); } } var frecuency = 10000; // The lapse between each new Queue var since_id = 1; var run = function () { twitterlib .timeline('twitteruser', { filter : "'?'", limit: 10 }, passToQueue) }; var twitterQueue = new Queue(frecuency, function (item) { var tweet = $(renderTweet(item)); var tweetClone = tweet.clone().hide().css({ visibility: 'hidden' }).prependTo('#tweets').slideDown(1000); tweet.css({ top: -200, position: 'absolute' }).prependTo('#tweets').animate({ top: 0 }, 1000, function () { tweetClone.css({ visibility: 'visible' }); $(this).remove(); }); $('#tweets p:below(' + window.innerHeight + ')').remove(); }).empty(run); run();

  Read the article

• Creating a Build Definition using the TFS 2010 API

  - by Jakob Ehn

  In this post I will show how to create a new build definition in TFS 2010 using the TFS API. When creating a build definition manually, using Team Explorer, the necessary steps are lined out in the New Build Definition Wizard:     So, lets see how the code looks like, using the same order. To start off, we need to connect to TFS and get a reference to the IBuildServer object: TfsTeamProjectCollection server = newTfsTeamProjectCollection(newUri("http://<tfs>:<port>/tfs")); server.EnsureAuthenticated(); IBuildServer buildServer = (IBuildServer) server.GetService(typeof (IBuildServer)); General First we create a IBuildDefinition object for the team project and set a name and description for it: var buildDefinition = buildServer.CreateBuildDefinition(teamProject); buildDefinition.Name = "TestBuild"; buildDefinition.Description = "description here..."; Trigger Next up, we set the trigger type. For this one, we set it to individual which corresponds to the Continuous Integration - Build each check-in trigger option buildDefinition.ContinuousIntegrationType = ContinuousIntegrationType.Individual; Workspace For the workspace mappings, we create two mappings here, where one is a cloak. Note the user of $(SourceDir) variable, which is expanded by Team Build into the sources directory when running the build. buildDefinition.Workspace.AddMapping("$/Path/project.sln", "$(SourceDir)", WorkspaceMappingType.Map); buildDefinition.Workspace.AddMapping("$/OtherPath/", "", WorkspaceMappingType.Cloak); Build Defaults In the build defaults, we set the build controller and the drop location. To get a build controller, we can (for example) use the GetBuildController method to get an existing build controller by name: buildDefinition.BuildController = buildServer.GetBuildController(buildController); buildDefinition.DefaultDropLocation = @\\SERVER\Drop\TestBuild; Process So far, this wasy easy. Now we get to the tricky part. TFS 2010 Build is based on Windows Workflow 4.0. The build process is defined in a separate .XAML file called a Build Process Template. By default, every new team team project containtwo build process templates called DefaultTemplate and UpgradeTemplate. In this sample, we want to create a build definition using the default template. We use te QueryProcessTemplates method to get a reference to the default for the current team project   //Get default template var defaultTemplate = buildServer.QueryProcessTemplates(teamProject).Where(p => p.TemplateType == ProcessTemplateType.Default).First(); buildDefinition.Process = defaultTemplate;   There are several build process templates that can be set for the default build process template. Only one of these are required, the ProjectsToBuild parameters which contains the solution(s) and configuration(s) that should be built. To set this info, we use the ProcessParameters property of thhe IBuildDefinition interface. The format of this property is actually just a serialized dictionary (IDictionary<string, object>) that maps a key (parameter name) to a value which can be any kind of object. This is rather messy, but fortunately, there is a helper class called WorkflowHelpers inthe Microsoft.TeamFoundation.Build.Workflow namespace, that simplifies working with this persistence format a bit. The following code shows how to set the BuildSettings information for a build definition: //Set process parameters varprocess = WorkflowHelpers.DeserializeProcessParameters(buildDefinition.ProcessParameters); //Set BuildSettings properties BuildSettings settings = newBuildSettings(); settings.ProjectsToBuild = newStringList("$/pathToProject/project.sln"); settings.PlatformConfigurations = newPlatformConfigurationList(); settings.PlatformConfigurations.Add(newPlatformConfiguration("Any CPU", "Debug")); process.Add("BuildSettings", settings); buildDefinition.ProcessParameters = WorkflowHelpers.SerializeProcessParameters(process); The other build process parameters of a build definition can be set using the same approach   Retention  Policy This one is easy, we just clear the default settings and set our own: buildDefinition.RetentionPolicyList.Clear(); buildDefinition.AddRetentionPolicy(BuildReason.Triggered, BuildStatus.Succeeded, 10, DeleteOptions.All); buildDefinition.AddRetentionPolicy(BuildReason.Triggered, BuildStatus.Failed, 10, DeleteOptions.All); buildDefinition.AddRetentionPolicy(BuildReason.Triggered, BuildStatus.Stopped, 1, DeleteOptions.All); buildDefinition.AddRetentionPolicy(BuildReason.Triggered, BuildStatus.PartiallySucceeded, 10, DeleteOptions.All); Save It! And we’re done, lets save the build definition: buildDefinition.Save(); That’s it!

  Read the article

• Oracle HRMS API – Create or Update Employee Phone

  - by PRajkumar

  API --  hr_phone_api.create_or_update_phone   Example -- DECLARE        ln_phone_id                              PER_PHONES.PHONE_ID%TYPE;        ln_object_version_number    PER_PHONES.OBJECT_VERSION_NUMBER%TYPE; BEGIN    -- Create or Update Employee Phone Detail    -- -----------------------------------------------------------     hr_phone_api.create_or_update_phone     (   -- Input data elements         -- -----------------------------         p_date_from                             => TO_DATE('13-JUN-2011'),         p_phone_type                          => 'W1',         p_phone_number                   => '9999999',         p_parent_id                              => 32979,         p_parent_table                         => 'PER_ALL_PEOPLE_F',         p_effective_date                       => TO_DATE('13-JUN-2011'),         -- Output data elements         -- --------------------------------         p_phone_id                              => ln_phone_id,         p_object_version_number    => ln_object_version_number      );    COMMIT; EXCEPTION       WHEN OTHERS THEN                     ROLLBACK;                      dbms_output.put_line(SQLERRM); END; / SHOW ERR;  

  Read the article

• TFS 2012 API Create Alert Subscriptions

  - by Bob Hardister

  Originally posted on: http://geekswithblogs.net/BobHardister/archive/2013/07/24/tfs-2012-api-create-alert-subscriptions.aspxThere were only a few post on this and I felt like really important information was left out: What the defaults are How to create the filter string Here’s the code to create the subscription. Get the Collection public TfsTeamProjectCollection GetCollection(string collectionUrl) { try { //connect to the TFS collection using the active user TfsTeamProjectCollection tpc = new TfsTeamProjectCollection(new Uri(collectionUrl)); tpc.EnsureAuthenticated(); return tpc; } catch (Exception) { return null; } } Use Impersonation Because my app is used to create “support tickets” as stories in TFS, I use impersonation so the subscription is setup for the “requester.”  That way I can take all the defaults for the subscription delivery preferences. public TfsTeamProjectCollection GetCollectionImpersonation(string collectionUrl, string impersonatingUserAccount) { // see: http://blogs.msdn.com/b/taylaf/archive/2009/12/04/introducing-tfs-impersonation.aspx try { TfsTeamProjectCollection tpc = GetCollection(collectionUrl); if (!(tpc == null)) { //get the TFS identity management service (v2 is 2012 only) IIdentityManagementService2 ims = tpc.GetService<IIdentityManagementService2>(); //look up the user we want to impersonate TeamFoundationIdentity identity = ims.ReadIdentity(IdentitySearchFactor.AccountName, impersonatingUserAccount, MembershipQuery.None, ReadIdentityOptions.None); //create a new connection using the impersonated user account //note: do not ensure authentication because the impersonated user may not have //windows authentication at execution if (!(identity == null)) { TfsTeamProjectCollection itpc = new TfsTeamProjectCollection(tpc.Uri, identity.Descriptor); return itpc; } else { //the user account is not found return null; } } else { return null; } } catch (Exception) { return null; } } Create the Alert Subscription public bool SetWiAlert(string collectionUrl, string projectName, int wiId, string emailAddress, string userAccount) { bool setSuccessful = false; try { //use impersonation so the event service creating the subscription will default to //the correct account: otherwise domain ambiguity could be a problem TfsTeamProjectCollection itpc = GetCollectionImpersonation(collectionUrl, userAccount); if (!(itpc == null)) { IEventService es = itpc.GetService(typeof(IEventService)) as IEventService; DeliveryPreference deliveryPreference = new DeliveryPreference(); //deliveryPreference.Address = emailAddress; deliveryPreference.Schedule = DeliverySchedule.Immediate; deliveryPreference.Type = DeliveryType.EmailHtml; //the following line does not work for two reasons: //string filter = string.Format("\"ID\" = '{0}' AND \"Authorized As\" <> '[Me]'", wiId); //1. the create fails because there is a space between Authorized As //2. the explicit query criteria are all incorrect anyway // see uncommented line for what does work: you have to create the subscription mannually // and then get it to view what the filter string needs to be (see following commented code) //this works string filter = string.Format("\"CoreFields/IntegerFields/Field[Name='ID']/NewValue\" = '12175'" + " AND \"CoreFields/StringFields/Field[Name='Authorized As']/NewValue\"" + " <> '@@MyDisplayName@@'", projectName, wiId); string eventName = string.Format("<PT N=\"ALM Ticket for Work Item {0}\"/>", wiId); es.SubscribeEvent("WorkItemChangedEvent", filter, deliveryPreference, eventName); ////use this code to get existing subscriptions: you can look at manually created ////subscriptions to see what the filter string needs to be //IIdentityManagementService2 ims = itpc.GetService<IIdentityManagementService2>(); //TeamFoundationIdentity identity = ims.ReadIdentity(IdentitySearchFactor.AccountName, // userAccount, // MembershipQuery.None, // ReadIdentityOptions.None); //var existingsubscriptions = es.GetEventSubscriptions(identity.Descriptor); setSuccessful = true; return setSuccessful; } else { return setSuccessful; } } catch (Exception) { return setSuccessful; } }

  Read the article

• Permissions issue Mac OS X Client -> Mac OS X Server

  - by Meltemi

  I can't get access to a folder on our server and can't understand why. Perhaps someone will see what I'm overlooking... Trouble accessing /Library/Subdirectory/NextDirectory/ User joe can ssh to the server just fine and cd to /Library/Subdirectory/ however trying to cd into the next folder, NextDirectory, gives this error: -bash: cd: NextDirectory/: Permission denied both username joe & bill are members of the group admin and both can get INTO Subdirectory without any trouble... hostname:Library joe$ ls -l | grep Subdirectory drwxrwxr-x 3 bill admin 102 Jun 1 14:51 Subdirectory and from w/in the Subversion folder hostname:Subdirectory joe$ ls -l drwxrwx--- 5 root admin 170 Jun 1 22:19 NextDirectory bill can cd into NextDirectory but joe cannot!?! What am I overlooking? What tools do we have to troubleshoot this? thanks!

  Read the article

• Monitoring and terminating a hanged process in Linux

  - by Yoav

  Hi, I'm writing a script that runs many simultaneous processes that run the "dig" command. Once in a while (relatively rare, but happens in every run since I run dig many times) the dig command hangs with 0% CPU. Therefore, my script never terminates. I've created a monitor process for each dig command I run, which terminates it after a while, but I was wondering if there isn't a simpler and more efficient way to run a process with a pre-determined "expiration date", i.e. if the process runs more then X seconds it gets a signal that terminates it. Thanks!

  Read the article

• Mutt and msmtp interoperability

  - by illusionoflife

  I am working on configuring /mutt/ to send mail via /msmtp/. Strangely, if I user /msmtp/ from shell, all okay, that means, that .msmtprc is correct. However, mail sent with mutt do not come. I have this line in .muttrc. set sendmail="msmtp" How can I debug this problem? EDIT: I found, that if I send just text, like msmtp 'my-email' <<< "Hello", it works. But if I send fully builded email-header, it do not. Is it gmail politics or what?

  Read the article

• Why is NTFS case sensitive?

  - by Luke

  I personally thought that NTFS was case insensitive, since you can type cmd, CMD, cMd or even CmD and still get the command prompt. However, why is it that during a CHKDSK x: /f /r, sometimes it fixes capitalization in some files? If it didn't care about the case, it shouldn't matter about that, and CHKDSK shouldn't be checking if it's actually CMD or cmd. Am I right? Where does it actually matter in the file system?

  Read the article

• What's the purpose of setgid directory?

  - by ???

  I know how setgid works, but I don't know why it is designed, is there any example to illustrate what problems it solves?

  Read the article

• bash pipe construct to prepend something to the stdoutput of previous command

  - by AndreasT

  I want to use sendmail to send me stuff and want to do it in a oneliner. echo "mail content" | sendmail emailataddres.com Sends it without subject. The subject line must come before the Mail content, so I am looking for something along the lines of: echo "mail content" | prepend "Subject: All that matters" | sendmail emailataddres.com sed and awk tend to be really awkward to use and remember. EDIT:Just to clarify: echo "Mail content" is just an illustrating example. I need to be able to prepend stuff to stdout streams from any source. e.g.: ifconfig, zcat, etc..

  Read the article

• Alternative to the tee command whitout STDOUT

  - by aef

  I'm using | sudo tee FILENAME to be able to write or append to a file for which superuser permissions are required quite often. Although I understand why it is helpful in some situation, that tee also sends its input to STDOUT again, I never ever actually used that part of tee for anything useful. In most situations, this feature only causes my screen to be filled with unwanted jitter, if I don't go the extra step and manually silence it with tee 1> /dev/null. My question: Is there is a command arround, which does exactly the same thing as tee, but does by default not output anything to STDOUT?

  Read the article

• google docs + web app

  - by King

  Hi Guys I am trying to create a web app to share docs with all editor features (just like google docs). My main requirements for this app are as follows: 1. Should have all editor features (can be done using open office api, google docs api, Microsoft office web apps api) 2. Should be shared between multiple users and can be edited by multiple users and other sync features (can be done using google docs api, Microsoft office web apps) 3. Can save the document created and edited on my own/ custom server addr. (Which api can support this??? I know open office can support this) Guys can you please suggest me one api which can be used to do all the above. Also please suggest if I am underestimating any API above regarding any functionality that i thing is not supported. Thanks King

  Read the article

• Implementation of APIs on diferent platforms

  - by b-gen-jack-o-neill

  OK, this is basicly just about any non-default OS API running on all different OS. But for my example let´s consider platform Windows, API SDL (Simple DirectMedia Layer). Actually this question came to my mind when I was reading about SDL. Originally, I thought that on Windows (and basicly any other OS) you must use OS API to make certain actions, like wrtiting to screen, creating window and so on, becouse that API knows what kernel calls and system subroutines calls it has to do. But when I read about SDL, I surprised me, becouse, you cannot make computer to do anything more than OS can, since you cannot acess HW directly, only thru OS API, from Console allocation to DirectX. So, my question actually is, how does this not-default-OS APIs work? Do they use (wrap) original system API (like MFC wraps win32 api)? Or, do they actually have direct acess to Windows kernel? Or is there any third, way in between? Thanks.

  Read the article

• Setting per-directory umask using ACLs

  - by Yarin

  We want to mimic the behavior of a system-wide 002 umask on a certain directory foo, in order to ensure the following result: All sub-directories created underneath foo will have 775 permissions All files created underneath foo and subdirectories will have 664 permissions 1 and 2 will happen for files/dirs created by all users, including root, and all daemons. Assuming that ACL is enabled on our partition, this is the command we've come up with: setfacl -R -d -m mask:002 foo This seems to be working- I'm basically just looking for confirmation. Is this the most effective way to apply a per-directory umask with an ACL?

  Read the article

• HTML5 offline cache google font api

  - by Bala Clark

  I'm trying to create an offline HTML5 test application, and am playing with the new google fonts api at the same time. Does anyone have any ideas how to cache the remote fonts? Simply putting the api call in the cache manifest doesn't work, I assume this is because the api actually loads other files (ttf, eot, etc). Any ideas if using the font api offline would be possible? For reference this is the call I am making: http://fonts.googleapis.com/css?family=IM+Fell+English|Molengo|Reenie+Beanie

  Read the article

• Implement eBay Finding/Feedback API [Java]

  - by zengr

  Hi, I have just started with the ebay Finding API and Feedback API and I need to deploy a basic API implementation on GAE/J. The problems are: How do we start with the local dev environment of the ebay SDK? There is no Java tutorial for the Finding API and feedback. GAE/J + ebay APIs won't cause any complexity right? I am looking for head start in the right direction,I am using Eclipse + GAE plugin.

  Read the article

• Updating the managed debugging API for .NET v4

  - by Brian Donahue

  In any successful investigation, the right tools play a big part in collecting evidence about the state of the "crime scene" as it was before the detectives arrived. Unfortunately for the Crash Scene Investigator, we don't have the budget to fly out to the customer's site, chalk the outline, and eat their doughnuts. We have to rely on the end-user to collect the evidence for us, which means giving them the fingerprint dust and the evidence baggies and leaving them to it. With that in mind, the Red Gate support team have been writing tools that can collect vital clues with a minimum of fuss. Years ago we would have asked for a memory dump, where we used to get the customer to run CDB.exe and produce dumps that we could analyze in-house, but those dumps were pretty unwieldy (500MB files) and the debugger often didn't dump exactly where we wanted, or made five or more dumps. What we wanted was just the minimum state information from the program at the time of failure, so we produced a managed debugger that captured every first and second-chance exception and logged the stack and a minimal amount of variables from the memory of the application, which could all be exported as XML. This caused less inconvenience to the end-user because it is much easier to send a 65KB XML file in an email than a 500MB file containing all of the application's memory. We don't need to have the entire victim shipped out to us when we just want to know what was under the fingernails. The thing that made creating a managed debugging tool possible was the MDbg Engine example written by Microsoft as part of the Debugging Tools for Windows distribution. Since the ICorDebug interface is a bit difficult to understand, they had kindly created some wrappers that provided an event-driven debugging model that was perfect for our needs, but .NET 4 applications under debugging started complaining that "The debugger's protocol is incompatible with the debuggee". The introduction of .NET Framework v4 had changed the managed debugging API significantly, however, without an update for the MDbg Engine code! After a few hours of research, I had finally worked out that most of the version 4 ICorDebug interface still works much the same way in "legacy" v2 mode and there was a relatively easy fix for the problem in that you can still get a reference to legacy ICorDebug by changing the way the interface is created. In .NET v2, the interface was acquired using the CreateDebuggingInterfaceFromVersion method in mscoree.dll. In v4, you must first create IClrMetaHost, enumerate the runtimes, get an ICLRRuntimeInfo interface to the .NET 4 runtime from that, and use the GetInterface method in mscoree.dll to return a "legacy" ICorDebug interface. The rest of the MDbg Engine will continue working the old way. Here is how I had changed the MDbg Engine code to support .NET v4: private void InitFromVersion(string debuggerVersion){if( debuggerVersion.StartsWith("v1") ){throw new ArgumentException( "Can't debug a version 1 CLR process (\"" + debuggerVersion + "\"). Run application in a version 2 CLR, or use a version 1 debugger instead." );} ICorDebug rawDebuggingAPI=null;if (debuggerVersion.StartsWith("v4")){Guid CLSID_MetaHost = new Guid("9280188D-0E8E-4867-B30C-7FA83884E8DE"); Guid IID_MetaHost = new Guid("D332DB9E-B9B3-4125-8207-A14884F53216"); ICLRMetaHost metahost = (ICLRMetaHost)NativeMethods.ClrCreateInterface(CLSID_MetaHost, IID_MetaHost); IEnumUnknown runtimes = metahost.EnumerateInstalledRuntimes(); ICLRRuntimeInfo runtime = GetRuntime(runtimes, debuggerVersion); //Defined in metahost.hGuid CLSID_CLRDebuggingLegacy = new Guid(0xDF8395B5, 0xA4BA, 0x450b, 0xA7, 0x7C, 0xA9, 0xA4, 0x77, 0x62, 0xC5, 0x20);Guid IID_ICorDebug = new Guid("3D6F5F61-7538-11D3-8D5B-00104B35E7EF"); Object res;runtime.GetInterface(ref CLSID_CLRDebuggingLegacy, ref IID_ICorDebug, out res); rawDebuggingAPI = (ICorDebug)res; }elserawDebuggingAPI = NativeMethods.CreateDebuggingInterfaceFromVersion((int)CorDebuggerVersion.Whidbey,debuggerVersion);if (rawDebuggingAPI != null)InitFromICorDebug(rawDebuggingAPI);elsethrow new ArgumentException("Support for debugging version " + debuggerVersion + " is not yet implemented");} The changes above will ensure that the debugger can support .NET Framework v2 and v4 applications with the same codebase, but we do compile two different applications: one targeting v2 and the other v4. As a footnote I need to add that some missing native methods and wrappers, along with the EnumerateRuntimes method code, came from the Mindbg project on Codeplex. Another change is that when using the MDbgEngine.CreateProcess to launch a process in the debugger, do not supply a null as the final argument. This does not work any more because GetCORVersion always returns "v2.0.50727" as the function has been deprecated in .NET v4. What's worse is that on a system with only .NET 4, the user will be prompted to download and install .NET v2! Not nice! This works much better: proc = m_Debugger.CreateProcess(ProcessName, ProcessArgs, DebugModeFlag.Default,String.Format("v{0}.{1}.{2}",System.Environment.Version.Major,System.Environment.Version.Minor,System.Environment.Version.Build)); Microsoft "unofficially" plan on updating the MDbg samples soon, but if you have an MDbg-based application, you can get it working right now by changing one method a bit and adding a few new interfaces (ICLRMetaHost, IEnumUnknown, and ICLRRuntimeInfo). The new, non-legacy implementation of MDbg Engine will add new, interesting features like dump-file support and by association I assume garbage-collection/managed object stats, so it will be well worth looking into if you want to extend the functionality of a managed debugger going forward.

  Read the article

• TFS API-Process Template currently applied to the Team Project

  - by Tarun Arora

  Download Demo Solution - here In this blog post I’ll show you how to use the TFS API to get the name of the Process Template that is currently applied to the Team Project. You can also download the demo solution attached, I’ve tested this solution against TFS 2010 and TFS 2011.    1. Connecting to TFS Programmatically I have a blog post that shows you from where to download the VS 2010 SP1 SDK and how to connect to TFS programmatically. private TfsTeamProjectCollection _tfs; private string _selectedTeamProject;   TeamProjectPicker tfsPP = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPP.ShowDialog(); this._tfs = tfsPP.SelectedTeamProjectCollection; this._selectedTeamProject = tfsPP.SelectedProjects[0].Name; 2. Programmatically get the Process Template details of the selected Team Project I’ll be making use of the VersionControlServer service to get the Team Project details and the ICommonStructureService to get the Project Properties. private ProjectProperty[] GetProcessTemplateDetailsForTheSelectedProject() { var vcs = _tfs.GetService<VersionControlServer>(); var ics = _tfs.GetService<ICommonStructureService>(); ProjectProperty[] ProjectProperties = null; var p = vcs.GetTeamProject(_selectedTeamProject); string ProjectName = string.Empty; string ProjectState = String.Empty; int templateId = 0; ProjectProperties = null; ics.GetProjectProperties(p.ArtifactUri.AbsoluteUri, out ProjectName, out ProjectState, out templateId, out ProjectProperties); return ProjectProperties; } 3. What’s the catch? The ProjectProperties will contain a property “Process Template” which as a value has the name of the process template. So, you will be able to use the below line of code to get the name of the process template. var processTemplateName = processTemplateDetails.Where(pt => pt.Name == "Process Template").Select(pt => pt.Value).FirstOrDefault();   However, if the process template does not contain the property “Process Template” then you will need to add it. So, the question becomes how do i add the Name property to the Process Template. Download the Process Template from the Process Template Manager on your local        Once you have downloaded the Process Template to your local machine, navigate to the Classification folder with in the template       From the classification folder open Classification.xml        Add a new property <property name=”Process Template” value=”MSF for CMMI Process Improvement v5.0” />           4. Putting it all together… using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.VersionControl.Client; using Microsoft.TeamFoundation.Server; using System.Diagnostics; using Microsoft.TeamFoundation.WorkItemTracking.Client; namespace TfsAPIDemoProcessTemplate { public partial class Form1 : Form { public Form1() { InitializeComponent(); } private TfsTeamProjectCollection _tfs; private string _selectedTeamProject; private void btnConnect_Click(object sender, EventArgs e) { TeamProjectPicker tfsPP = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPP.ShowDialog(); this._tfs = tfsPP.SelectedTeamProjectCollection; this._selectedTeamProject = tfsPP.SelectedProjects[0].Name; var processTemplateDetails = GetProcessTemplateDetailsForTheSelectedProject(); listBox1.Items.Clear(); listBox1.Items.Add(String.Format("Team Project Selected => '{0}'", _selectedTeamProject)); listBox1.Items.Add(Environment.NewLine); var processTemplateName = processTemplateDetails.Where(pt => pt.Name == "Process Template") .Select(pt => pt.Value).FirstOrDefault(); if (!string.IsNullOrEmpty(processTemplateName)) { listBox1.Items.Add(Environment.NewLine); listBox1.Items.Add(String.Format("Process Template Name: {0}", processTemplateName)); } else { listBox1.Items.Add(String.Format("The Process Template does not have the 'Name' property set up")); listBox1.Items.Add(String.Format("***TIP: Download the Process Template and in Classification.xml add a new property Name, update the template then you will be able to see the Process Template Name***")); listBox1.Items.Add(String.Format(" - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -")); } } private ProjectProperty[] GetProcessTemplateDetailsForTheSelectedProject() { var vcs = _tfs.GetService<VersionControlServer>(); var ics = _tfs.GetService<ICommonStructureService>(); ProjectProperty[] ProjectProperties = null; var p = vcs.GetTeamProject(_selectedTeamProject); string ProjectName = string.Empty; string ProjectState = String.Empty; int templateId = 0; ProjectProperties = null; ics.GetProjectProperties(p.ArtifactUri.AbsoluteUri, out ProjectName, out ProjectState, out templateId, out ProjectProperties); return ProjectProperties; } } } Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Have you come across a better way of doing this, please share your experience here. Questions/Feedback/Suggestions, etc please leave a comment. Thank You! Share this post : CodeProject

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >