Search Results

Search found 20465 results on 819 pages for 'remote tools'.

Page 55/819 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

  • Powershell Get-Process cannot connect to remote computer

    - by amandion
    I've been struggling with this for a few hours and can't figure this out. I have two Windows 7 computers. One is my workstation that is using Powershell to do administrative maintenance. The other is the machine I'd like to use Powershell remoting on to execute remote Powershell cmdlets on. On both computers, I've enabled Powershell remoting and added all computers to TrustedHosts with the * value. On the remote computer, I've started the Remote registry service and ensured that the DCOM, Winmgmt and the Winrm services are running. Firewall is disabled on remote machine too. The cmdlet I try to run is: Get-Process -ComputerName $name Where $name is the name of the remote machine. I keep getting an error saying that it could not connect to the remote PC. I've also tried using the IP and I get the same error. These PCs are not in a domain. I am able to do the following successfully: Invoke-Command {get-Process} -ComputerName $name -Credential $creds Where $name is the machine name and $creds is the user name and password for the remote computer's local Admin account. This gives me the same output I would expect. While this is an acceptable workaround, I am curious, why doesn't using get-process with remoting work as it should? I've seen a few articles on the web suggesting people have had success with it on its own. Each time I am using Powershell on my workstation with elevated privileges. Any ideas?

    Read the article

  • MachForm, RackForms(FromBoss), Form Tools [on hold]

    - by user39200
    This is my first question here. I am looking for a form builder solution that will allow rapid form development even by beginners, without needing much knowledge of programming. I prefer a solution that we can install on our servers. I have 3 products shortlisted for further review: MachForm, RackForms(formerly FormBoss) and Form Tools If anyone has used any of these products, I would appreciate your input on your experience with using these products and your recommendations. Does anyone know of other products that I must be sure to include in my review? We will eventually move over hundreds of forms to the chosen solution and I would like to make sure as much as I can that it will still be a viable solution in the coming years. Looking forward to everyone's feedback!

    Read the article

  • Silverlight 4 released. Availability of tools announcement

    Todays the day! Tuesday at DevConnections in Las Vegas, Scott Guthrie just announced the launch of Silverlight 4. We wanted to take the opportunity at DevConnections to let a large audience of our customers online/offline know that were done and shipped Silverlight 4. As of today its now available for you to download/use. Heres some helpful quick update information for you: Download the bits Understanding what is in the bits RIA Services Windows Phone 7 Developer Tools VS2008...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How can I attach multiple urls to a single git remote?

    - by deterb
    I'm currently using git on windows through a combination of msysgit and Cygwin. I have a laptop which I move around quite a bit, so it's not on a consistent location. Unfortunately, I don't have a consistent name for it due to the computer name not being resolved on all of the locations I connect to, so I can't just use the computer name as the host for the url (e.g. git://compname/repo), so I have to use the IP address. Is there a way I can add multiple urls to pull from for a particular remote? I've seen git remote set-url --add [--push] <name> <newurl> as a way to add multiple URLs to a remote, and I can see the updates in the .git/config file, but git only tries to use the first one. Is there a way to get git to try to use all of the urls? I've tried both git fetch and git remote update, but neither tries anything after the first url. Note that I haven't tried this on linux yet, and I can't fix the computer name resolution as this is at work. Thanks

    Read the article

  • jQuery validation plugin: valid() does not work with remote validation ?

    - by a-dilla
    I got started by following this awesome tutorial, but wanted to do the validation on on keyup and place my errors somewhere else. The remote validation shows its own error message at the appropriate times, making me think I had it working. But if I ask specifically if a field with remote validation is valid, it says no, actually, its not. In application.js I have this... $("#new_user").validate({ rules: { "user[login]": {required: true, minlength: 3, remote: "/live_validations/check_login"}, }, messages: { "user[login]": {required: " ", minlength: " ", remote: " "}, } }); $("#user_login").keyup(function(){ if($(this).valid()){ $(this).siblings(".feedback").html("0"); }else{ $(this).siblings(".feedback").html("1"); } }) And then this in the rails app... def check_login @user = User.find_by_login(params[:user][:login]) respond_to do |format| format.json { render :json => @user ? "false" : "true" } end end I think that my problem might have everything to do with this ticket over at jQuery, and tried to implement that code, but, being new to jQuery, it's all a bit over my head. When I say bit, I mean way way. Any ideas to fix it, or a new way to look at it, would be a big help.

    Read the article

  • How to force a login for an administrator when using Remote Desktop Connection and fast user switching enabled?

    - by brett rogers
    Scenario: I am at work. I want to remote desktop into my machine at home. Problem is, my 5-year-old daughter is playing games on Starfall.com (or something similar) on her (non-admin) account. When I attempt to connect I see this message: Another user is currently logged on to this computer. If you continue, this user has to disconnect from this computer. Do you want to continue? I click Yes and then see Please wait for 'UserName' to respond This presents my daughter with an Allow/Disallow dialog on whether to let me connect. She clicks Disallow (or No or whatever it says) and then I see 'UserName' has denied your request Question: How can I force my account to log in and disconnect her session? Additional Info: My account is an administrator account. My daughter's account is a non-administrator account. Home machine is Windows 7 Pro with fast user switching enabled. Turning off fast user switching is not an option (Kyle pointed out in his answer that turning it off would allow the admin to force another user off). I would keep fast user switching's ability to change accounts without closing the previous account's session over being able to force myself to connect.

    Read the article

  • How do I improve my screen resolution in Windows Remote Desktop?

    - by Jeff
    I'm RDP'ing into a Win2K3 machine from a WinXP machine, and I cannot stand the low screen resolution I get on the Win2K3 box. Text is too large and the graphics/colors aren't very smooth. How do I improve this? If I right-click on the desktop of the remote machine and go to Properties - Settings, I see that the screen resolution is set to 1280x1024 (should be okay, I would think), and the color quality is Medium (16 bit) (not optimal) and I don't have the option to change either setting (because they're set in the .rdp file for the session, right?). If I move over to the Appearance tab, I see that font size is set to Normal, with no option to make it smaller. The thing is, these settings are close to what I have on the XP machine I'm RDP'ing in from. The only difference (in those settings) is the color quality, which is 32 bit. Any ideas on how I can improve the situation? Other tidbits: The graphics card on the Win2K3 machine is ATI ES1000. I think I have the latest drivers for it. I'm running VMware Workstation on the Win2K3 machine, and if I create a Win2K3 VM and RDP into it from the XP machine, the resolution is just fine.

    Read the article

  • Wake on Lan Remote not waking PC while the PC does receive the packet.

    - by Nycrea
    Over the last couple of weeks, I have been trying to set up WOL from a remote location. When I use my laptop to wake the machine locally, it works just fine. (for some reason, when I try to wake from my phone with an app called "WOL wake on lan" it does not work locally either, but I'll get to that later) Anyway, when the machine is turned on, and I let it 'listen' for incoming magic packets (with a program called "WOL magic packet sender") on my specified port, it does receive them, though when turned off, the machine does not wake. When sending from phone, either locally or via 3G remotely, it does receive but does not wake as well. Because the machine does receive them when turned on and listening, but does not wake when turned off, I am convinced the cause of the problem is my receiving PC, rather than the router or the sender. Some extra info: The receiving machine is a PC running Windows 7 64bit. My router is the Netgear JWNR2000v2. I have the port I use forwarded to my PC's static IP in the router. If anyone could help, or just share your own story with the same problem, maybe we can work this out. Thanks a lot in advance.

    Read the article

  • Remote Desktop Services Licensing - Does server have to have a RDS role?

    - by transistor1
    I recently set up a "micro" size Windows 2008 Datacenter server on Amazon AWS. My small group needs several concurrent RDS users to be able to access the machine. Without installing the "Remote Desktop Server" role, it allows 2 concurrent connections. I read on MS' website that in order to set up multiple users, we needed to install the RDS role. I did so, but now the application we are trying to share is running much slower than it was before. Prior to the role installation, it was taking about 5 seconds to open; now it is taking a few minutes to open -- without any other users logged on except me. My assumption is that the RDS role may be too much for this micro instance to handle, and currently, changing to another size instance is not an option (it may be possible later if we were to receive enough funding). This leads me to the following questions: 1) Is it a sensible assessment to assume that it is the RDS role is slowing things down, or are there other things that I could look at to speed it up? We are talking about a machine with ~600MB of memory. 2) If I revert back to the pre-RDS role, is there any legitimate way (in terms of purchasing RDS licenses) to get more than 2 concurrent desktops? I did read this, and am not questioning that the answerer is knowlegeable; but someone else may have some other experience. I am also making it clear that we want to do this in a legitimate way. Thanks in advance for any assistance that can be provided! EDIT: if it is helpful in answering the question, the application in question is a Lotus Approach database. Also, I am asking this from a technical perspective: not a legal one. I want to know if it is possible to install valid licenses without the RDS role.

    Read the article

  • Tools to Help Post Content On Your WordPress Blog

    - by Matthew Guay
    Now that you’ve got a nice blog, you want to do more with it and start posting content.  Here we look at some tools that will allow you to post directly to your WordPress blog. Writing a new blog post is easy with WordPress as we saw in our previous post about Starting your own WordPress blog.  The web editor gives you a lot of features and even lets you edit your post’s source code if you enjoy hacking HTML.  There are other tools that will allow you to post content, here we look at how you can post with dedicated apps, browser plugins, and even by email. Windows Live Writer Windows Live Writer (part of the Windows Live Essentials Suite) is a great app for posting content to your blog.  This free program for Microsoft lets you post content to a variety of blogging services, including Blogger, Typepad, LiveJournal, and of course WordPress.  You can write blog posts directly from its Word-like editor, complete with pictures and advanced formatting.  Even if you’re offline, you can still write posts and save them for when you’re online again. For more information about installing Live writer, check out our article on how to Install Windows Live Essentials In Windows 7. Once Live Writer is installed, open it to add your blog.  If you already had Live Writer installed and configured for a blog, you can add your new blog, too.  Just click your blog’s name in the top right corner, and select “Add blog account”. Select “Other blog service” to add your WordPress blog to Writer, and click Next.   Enter your blog’s web address, and your username and password.  Check Remember my password so you don’t have to enter it every time you write something. Writer will analyze your blog and setup your account. During the setup process it may ask to post a temporary post.  This will let you preview blog posts using your blog’s real theme, which is helpful, so click Yes. Finally, add your Blog’s name, and click Finish. You can now use the rich editor to write and add content to a new blog post.   Select the Preview tab to see how your post will look on your blog… Or, if you’re a HTML geek, select the Source tab to edit the code of your blog post. From the bottom of the window, you can choose categories, insert tags, and even schedule the post to publish on a different day.  Live Writer is fully integrated with WordPress; you’re not missing anything by using the desktop editor. If you want to edit a post you’ve already published, click the Open button and select the post.  You can chose and edit any post, including ones you published via the web interface or other editors. Add Multimedia Content to your Posts with Live Writer Back in the Edit tab, you can add pictures, videos and more from the sidebar.  Select what you want to insert. Pictures If you insert a picture, you can add many nice borders and designs to it. Or, you can even add artistic effects from the Effects tab in the sidebar. Photo Gallery If you want to post several pictures, say some of your vacation shots, then inserting a picture gallery may be the best option.  Select Insert Photo Gallery in the sidebar, and then choose the pictures you want in the gallery. Once the gallery is inserted, you can choose from several styles to showcase your pictures. When you post the blog, you will be asked to sign in with your Windows Live ID as the gallery pictures will be stored in the free Skydrive storage service. Your blog readers can see the preview of your pictures directly on your blog, and then can view each individual picture, download them, or see a slideshow online via the link. Video If you want to add a video to your blog post, select Video from the sidebar as above.  You can select a video that’s already online, or you can choose a new video from file and upload it via YouTube directly from Windows Live Writer.   Note that you will have to sign in with your YouTube account to upload videos to YouTube, so if you’re not logged in you’ll be prompted to do so when you click Insert. Geek Tip:  If you ever want to copy your Live Writer settings to another computer, check out our article on how to Backup Your Windows Live Writer Settings. Microsoft Office Word Word 2007 and 2010 also let you post content directly to your blog.  This is especially nice if you’ve already typed up a document and think it would be good on your Blog as well.  Check out our in-depth tutorial on posting blog posts via Word 2007 using Word 2007 as a blogging tool. This works in Word 2010 too, except the Office Orb has been replaced by the new Backstage view.  So, in Word 2010, to start a new blog post, click File \ New then select Blog post.  Proceed as you would in Word 2007 to add your blog settings and post the content you want. Or, if you’ve already written a document and want to post it, select File \ Share (or Save and Send in the final version of Word 2010), and then click Publish as Blog Post.  If you haven’t setup your blog account yet, set it up as shown in the Word 2007 article. Post Via Email Most of us use email daily, and already have our favorite email app or service.  Whether on your desktop or mobile phone, it’s easy to create rich emails and add content.  WordPress lets you generate a unique email address that you can use to easily post content and email to your blog.  Just compose your email with the subject as the title of your post, and send it to this unique address.  Your new post will be up in minutes. To active this feature, click the My Account button in the top menu bar in your WordPress.com account, and select My Blogs. Click the Enable button under Post by Email beside your blog’s name.   Now you’ll have a private email you can use to post to your blog.  Anything you send to this email will be posted as a new post.  If you think your email may be compromised, click Regenerate to get a new publishing email address. Any email program or webapp now is a blog post editor.  Feel free to use rich formatting or insert pictures; it all comes through great.  This is also a great way to post to your blog from your mobile device.  Whether you’re using webmail or a dedicated email client on your phone, you can now blog from anywhere.   Mobile Applications WordPress also offer dedicated applications for blogging directly from your mobile device.  You can write new posts, edit existing ones, and manage comments all from your Smartphone.  Currently they offer apps for iPhone, Android, and Blackberry.  Check them out at the link below. Conclusion Whether you want to write from your browser or email a post to your blog, WordPress is flexible enough to work right along with your preferences.  However you post, you can be sure that it will look professional and be easily accessible with your WordPress blog. Download Windows Live Writer Download WordPress apps for your mobile device Similar Articles Productive Geek Tips Quick Tip: Set a Future Date for a Post in WordPressAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogFuture Date a Post in Windows Live WriterHow To Start Your Own Professional Blog with WordPressUsing Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Connect to running web role on Azure using Remote Desktop Connection and VS2012

    - by Magnus Karlsson
    We want to be able to collect IntelliTrace information from our running app and also use remote desktop to connect to the IIS and look around(probably debugging). 1. Create certificate 1.1 Right-click the cloud project (marked in red) and select “Configure remote desktop”. 1.2 In the drop down list of certificates, choose <create> at the bottom. 1.3. Follow the instructions, you can set it up with default values. 1.4 When done. Choose the certificate and click “Copy to File…” as seen in the left of the picture above. 1.5. Save the file with any name you want. Now we will save it to local storage to be able to import it to our solution through the azure configuration manager in step 3. 2. Save certificate to local storage Now we need to attach it to our local certificate storage to be able to reach it from our confiuguration manager in visual studio. Microsoft provides the following steps for doing this: http://support.microsoft.com/kb/232137 In order to view the Certificates store on the local computer, perform the following steps: Click Start, and then click Run. Type "MMC.EXE" (without the quotation marks) and click OK. Click Console in the new MMC you created, and then click Add/Remove Snap-in. In the new window, click Add. Highlight the Certificates snap-in, and then click Add. Choose the Computer option and click Next. Select Local Computer on the next screen, and then click OK. Click Close , and then click OK. You have now added the Certificates snap-in, which will allow you to work with any certificates in your computer's certificate store. You may want to save this MMC for later use. Now that you have access to the Certificates snap-in, you can import the server certificate into you computer's certificate store by following these steps: Open the Certificates (Local Computer) snap-in and navigate to Personal, and then Certificates. Note: Certificates may not be listed. If it is not, that is because there are no certificates installed. Right-click Certificates (or Personal if that option does not exist.) Choose All Tasks, and then click Import. When the wizard starts, click Next. Browse to the PFX file you created containing your server certificate and private key. Click Next. Enter the password you gave the PFX file when you created it. Be sure the Mark the key as exportable option is selected if you want to be able to export the key pair again from this computer. As an added security measure, you may want to leave this option unchecked to ensure that no one can make a backup of your private key. Click Next, and then choose the Certificate Store you want to save the certificate to. You should select Personal because it is a Web server certificate. If you included the certificates in the certification hierarchy, it will also be added to this store. Click Next. You should see a summary of screen showing what the wizard is about to do. If this information is correct, click Finish. You will now see the server certificate for your Web server in the list of Personal Certificates. It will be denoted by the common name of the server (found in the subject section of the certificate). Now that you have the certificate backup imported into the certificate store, you can enable Internet Information Services 5.0 to use that certificate (and the corresponding private key). To do this, perform the following steps: Open the Internet Services Manager (under Administrative Tools) and navigate to the Web site you want to enable secure communications (SSL/TLS) on. Right-click on the site and click Properties. You should now see the properties screen for the Web site. Click the Directory Security tab. Under the Secure Communications section, click Server Certificate. This will start the Web Site Certificate Wizard. Click Next. Choose the Assign an existing certificate option and click Next. You will now see a screen showing that contents of your computer's personal certificate store. Highlight your Web server certificate (denoted by the common name), and then click Next. You will now see a summary screen showing you all the details about the certificate you are installing. Be sure that this information is correct or you may have problems using SSL or TLS in HTTP communications. Click Next, and then click OK to exit the wizard. You should now have an SSL/TLS-enabled Web server. Be sure to protect your PFX files from any unwanted personnel. Image of a typical MMC.EXE with the certificates up.   3. Import the certificate to you visual studio project. 3.1 Now right click your equivalent to the MvcWebRole1 (as seen in the first picture under the red oval) and choose properties. 3.2 Choose Certificates. Right click the ellipsis to the right of the “thumbprint” and you should be able to select your newly created certificate here. After selecting it- save the file.   4. Upload the certificate to your Azure subscription. 4.1 Go to the azure management portal, click the services menu icon to the left and choose the service. Click Upload in the bottom menu.     5. Connect to server. Since I tried to use account settings(have to use another name) we have to set up a new name for the connection. No biggie. 5.1 Go to azure management portal, select your service and in the bottom menu, choose “REMOTE”. This will display the configuration for remote connection. It will actually change your ServiceConfiguration.cscfg file. After you change It here it might be good to choose download and replace the one in your project. Set a name that is not your windows azure account name and not Administrator. 5.2 Goto visual studio, click Server Explorer. Choose as selected in the picture below and click “COnnect using remote desktop”.   5.2 You will now be able to log in with the name and password set up in step 5.1. and voila! Windows server 2012, IIS and other nice stuff!   To do this one I’ve been using http://msdn.microsoft.com/en-us/library/windowsazure/ff683671.aspx where you can collect some of this information and additional one.

    Read the article

  • OS X, Mercurial and MediaTemple problem

    - by bschaeffer
    I've installed Mercurial per MT's knowledge base file here. Working with it server side using ssh from my Mac works fine. I can initialize repositories and the like, but pulling from the server or pushing from my Mac produces an error I don't understand. Here's what I get when call hg push from my local installation (hash marks represent my server number): remote: Traceback (most recent call last): remote: File "/home/#####/users/.home/data/mercurial-1.5/hg", line 27, in ? remote: mercurial.dispatch.run() remote: File "/nfs/c05/h01/mnt/#####/data/mercurial-1.5/mercurial/dispatch.py", line 16, in run remote: sys.exit(dispatch(sys.argv[1:])) remote: File "/nfs/c05/h01/mnt/#####/data/mercurial-1.5/mercurial/dispatch.py", line 21, in dispatch remote: u = _ui.ui() remote: File "/nfs/c05/h01/mnt/#####/data/mercurial-1.5/mercurial/ui.py", line 38, in __init__ remote: for f in util.rcpath(): remote: File "/nfs/c05/h01/mnt/#####/data/mercurial-1.5/mercurial/util.py", line 1200, in rcpath remote: _rcpath = os_rcpath() remote: File "/nfs/c05/h01/mnt/#####/data/mercurial-1.5/mercurial/util.py", line 1174, in os_rcpath remote: path = system_rcpath() remote: File "/nfs/c05/h01/mnt/#####/data/mercurial-1.5/mercurial/posix.py", line 41, in system_rcpath remote: path.extend(rcfiles(os.path.dirname(sys.argv[0]) + remote: File "/nfs/c05/h01/mnt/#####/data/mercurial-1.5/mercurial/posix.py", line 30, in rcfiles remote: rcs.extend([os.path.join(rcdir, f) remote: File "/nfs/c05/h01/mnt/#####/data/mercurial-1.5/mercurial/demandimport.py", line 75, in __getattribute__ remote: self._load() remote: File "/nfs/c05/h01/mnt/#####/data/mercurial-1.5/mercurial/demandimport.py", line 47, in _load remote: mod = _origimport(head, globals, locals) remote: ImportError: No module named osutil abort: no suitable response from remote hg! Mercurial on my Mac is configured as follows [ui] username = John Smith editor = te -w remotecmd = ~/data/mercurial-1.5/hg My local single repo is configured as follows (hash marks represent my server number): [paths] default = ssh://mysite.com@s#####.gridserver.com/domains/mysite.com/html Mercurial on the server is configured with a just a username: [ui] username = John Smith The server .bash_profile is configured as follows (per the installation guide): # Aliases alias ls-a='ls -a -l' # Added this as suggested by the MediaTemple guide export PYTHONPATH=${HOME}/lib/python:$PYTHONPATH export PATH=${HOME}/bin:$PATH I understand this probably isn't a MediaTemple problem, but more likely an installation problem. I would really appreciate any assitance on this problem. Thanks in advance!

    Read the article

  • Using jQuery tools from within GWT -- is there a way to allow exchanges?

    - by culov
    I have a GWT web-app with a nearly full page Google map window. Inside the the map, I have infowindows which include links. What I want to do is use jquery tools overlays (http://flowplayer.org/tools/overlay/apple.html) to open the overlay and display it on top of the map once the link inside the info window is clicked. Now, the link source is generated dynamically, and it is hosted on a different server, so i have to open it in an iframe and set the source of the iframe before it opens. this seems simple enough since i only have 1 iframe on the page: function changeSource(url){ $("#menuIFrame").attr("src",url); } To call this before opening the overlay (which is done on mouse release), i create the following element in the google maps infowindow via GWT: <a href="http://whatever.com/menu/" onClick="changeSource('http://whatever.com/menu/');" rel=#menu"> View menu </a> Jquery tools works by opening whatever div has the id assigned to the value of 'rel', but because i have my javascript/jquery on my LandingPage.html in GWT, there appears to be some sort of disconnect between the two because the changeSource function is never called AND the overlay is never added to the window. Here's my app: http://truxmapper.appspot.com/ As you can see, the other overlays will work fine, but once you click an infowindow and try to view the menu, it will simply use the href to open the url in that window. Does anyone know of a solution that will allow me to accomplish my goal? Thanks!

    Read the article

  • C# Process.Start() on an executable on a remote system - security warning?

    - by BrettRobi
    I've created a Windows Service that accepts commands from remote machines via WCF. One of those commands is to run a specified executable (let's ignore the security implications of such functionality). In my Service I am using Process.Start() to run the executable. All works well if the executable is local to the machine, but if it is on a remote file share it is failing with no error (or more accurately just hanging). I suspect the problem is that it is triggering the standard Windows 'Unverified Publisher' warning that one would see if they double click an exe on a remote system. Is there any way I can bypass this from my service so that I can truly run any executable? As I said I understand the security implications of allowing it to run any executable, but this is really what I need. I would have thought this warning was only a user mode concept, but it really does seem to be getting in the way of my Service. Ideas?

    Read the article

  • Using SQL Developer to Debug your Anonymous PL/SQL Blocks

    - by JeffS
    Everyone knows that SQL Developer has a PL/SQL debugger – check! Everyone also knows that it’s only setup for debugging standalone PL/SQL objects like Functions, Procedures, and Packages, right? – NO! SQL Developer can also debug your Stored Java Procedures AND it can debug your standalone PLSQL blocks. These bits of PLSQL which do not live in the database are also known as ‘Anonymous Blocks.’ Anonymous PL/SQL blocks can be submitted to interactive tools such as SQL*Plus and Enterprise Manager, or embedded in an Oracle Precompiler or OCI program. At run time, the program sends these blocks to the Oracle database, where they are compiled and executed. Here’s an example of something you might want help debugging: Declare x number := 0; Begin Dbms_Output.Put(Sysdate || ' ' || Systimestamp); For Stuff In 1..100 Loop Dbms_Output.Put_Line('Stuff is equal to ' || Stuff || '.'); x := Stuff; End Loop; End; / With the power of remote debugging and unshared worksheets, we are going to be able to debug this ANON block! The trick – we need to create a dummy stored procedure and call it in our ANON block. Then we’re going to create an unshared worksheet and execute the script from there while the SQL Developer session is listening for remote debug connections. We step through the dummy procedure, and this takes OUT to our calling ANON block. Then we can use watches, breakpoints, and all that fancy debugger stuff! First things first, create this dummy procedure - create or replace procedure do_nothing is begin null; end; Then mouse-right-click on your Connection and select ‘Remote Debug.’ For an in-depth post on how to use the remote debugger, check out Barry’s excellent post on the subject. Open an unshared worksheet using Ctrl+Shift+N. This gives us a dedicated connection for our worksheet and any scripts or commands executed in it. Paste in your ANON block you want to debug. Add in a call to the dummy procedure above to the first line of your BEGIN block like so Begin do_nothing(); ... Then we need to setup the machine for remote debug for the session we have listening – basically we connect to SQL Developer. You can do that via a Environment Variable, or you can just add this line to your script - CALL DBMS_DEBUG_JDWP.CONNECT_TCP( 'localhost', '4000' ); Where ‘localhost’ is the machine where SQL Developer is running and ’4000′ is the port you started the debug listener on. Ok, with that all set, now just RUN the script. Once the PL/SQL call is made, the debugger will be invoked. You’ll end up in the DO_NOTHING() object. Debugging an ANON block from SQL Developer is possible! If you step out to the ANON block, we’ll end up in the script that’s used to call the procedure – which is the script you want to debug. The Anonymous Block is opened in a new SQL Dev page You can now step through the block, using watches and breakpoints as expected. I’m guessing your scripts are going to be a bit more complicated than mine, but this serves as a decent example to get you started. Here’s a screenshot of a watch and breakpoint defined in the anon block being debugged: Breakpoints, watches, and callstacks - oh my! For giggles, I created a breakpoint with a passcount of 90 for the FOR LOOP to see if it works. And of course it does You Might Also EnjoyUsing Pass Counts to Turbo Charge Your PL/SQL BreakpointsSQL Developer Tip: Viewing REFCURSOR OutputThe PL/SQL Debugger Strikes Back: Episode VDebugging PL/SQL with SQL Developer: Episode IVHow to find dependent objects in your PL/SQL Programs using SQL Developer

    Read the article

  • .NET Process.Start() on an executable on a remote system - security warning?

    - by BrettRobi
    I've created a Windows Service that accepts commands from remote machines via WCF. One of those commands is to run a specified executable (let's ignore the security implications of such functionality). In my Service I am using Process.Start() to run the executable. All works well if the executable is local to the machine, but if it is on a remote file share it is failing with no error (or more accurately just hanging). I suspect the problem is that it is triggering the standard Windows 'Unverified Publisher' warning that one would see if they double click an exe on a remote system. Is there any way I can bypass this from my service so that I can truly run any executable? As I said I understand the security implications of allowing it to run any executable, but this is really what I need. I would have thought this warning was only a user mode concept, but it really does seem to be getting in the way of my Service. Ideas?

    Read the article

  • How do you Remove an Invalid Remote Branch Reference from Git?

    - by Casey
    In my current repo I have the following output: $ git branch -a * master remotes/origin/master remotes/public/master I want to delete 'remotes/public/master' from the branch list: $ git branch -d remotes/public/master error: branch 'remotes/public/master' not found. Also, the output of 'git remote' is strange, since it does not list 'public': $ git remote show origin How can I delete 'remotes/public/master' from the branch list? Update, tried the 'git push' command: $ git push public :master fatal: 'public' does not appear to be a git repository fatal: The remote end hung up unexpectedly Solution: The accepted answer had the solution at the bottom! git gc --prune=now

    Read the article

  • Why doesn't jquery validation plugin's remote attribute work for me?

    - by Pandiya Chendur
    I use jquery validation plugin and the remote attribute works with emailId but not with mobileNo? var validator = $("#addform").validate({ rules: { Name: "required", MobileNo: { required: true, minlength: 10, remote: '<%=Url.Action("getClientMobNo", "Clients") %>' }, Address: "required" }, messages: { Name: "please provide a client name", MobileNo: { required: "Please provide a mobile phone no", rangelength: jQuery.format("Enter at least {0} characters"), remote: jQuery.format("This MobileNo is already in use") }, Address: "please provide client address" }, A null value is passed to my controller action.. Any suggestion... public JsonResult getClientMobNo(string mobno) { JsonResult result = new JsonResult(); string status = clirep.getClientMobNo(Convert.ToInt64(mobno)); if (status == "Mobile No already exists") { result.Data = false; } else { result.Data = true; } return result; }

    Read the article

  • Business Owners - What Remote Desktop Solution Do You Use To Service Your Clients PCs?

    - by Sootah
    Howdy fellow computer geeks, I am the owner of a local computer repair business that primarily services its clients on-site. On the occasions that we do service the machines in the office we generally have one of our techs pick the computer up while they are out and about and bring it back with them. Only rarely will we require the customer to bring us the computer themselves. In order to reduce costs, be much more efficient, and potentially expand our market far beyond what would be feasible with travel required; I am looking at ways that we can service our clients remotely whenever possible. What we're in need of is a solid remote desktop application that will be incredibly easy for our customers to connect to, as well as be robust enough that we don't need the client babysitting the computer during the entire repair. Ideally I would like to use a web-based solution so that we don't have to walk the customers through installing, connecting, and configuring it over the phone. This would be unacceptable because of the level of service they are used to. Effectively we'd want them to be able to just go to a URL, enter a PIN or something, and then they are connected and ready to rumble. (Obviously the option to just email them a link that'd do all this for them would be what we'd be aiming for) Along with the ease of use factor, we would need the product to not require any further intervention on the part of the client after we have connected. Nobody is going to be happy if we have to call them every 15 minutes so they can reconnect to us every time we reboot - so auto-reconnect is an absolute must. The only product I know of right now that does any of this is LogMeIn Rescue. It allows unattended access, the applet is lightweight and installs quickly, and the customer can either enter a PIN on the site or just click a link emailed to them in order to connect. The only real downside I see to LogMeIn Rescue is that it's $120.00/month per technician. While we'd ultimately end up saving far more than that per month just in fuel costs alone, I'd like to explore any other options out there that I may not have come across. So - Are there any equally good products out there? If so what are they, why do you recommend them, how have you been utilizing them yourself, and what do they cost? Thanks in advance for your help! -Sootah

    Read the article

  • How to setup Hadoop cluster so that it accepts mapreduce jobs from remote computers?

    - by drasto
    There is a computer I use for Hadoop map/reduce testing. This computer runs 4 Linux virtual machines (using Oracle virtual box). Each of them has Cloudera with Hadoop (distribution c3u4) installed and serves as a node of Hadoop cluster. One of those 4 nodes is master node running namenode and jobtracker, others are slave nodes. Normally I use this cluster from local network for testing. However when I try to access it from another network I cannot send any jobs to it. The computer running Hadoop cluster has public IP and can be reached over internet for another services. For example I am able to get HDFS (namenode) administration site and map/reduce (jobtracker) administration site (on ports 50070 and 50030 respectively) from remote network. Also it is possible to use Hue. Ports 8020 and 8021 are both allowed. What is blocking my map/reduce job submits from reaching the cluster? Is there some setting that I must change first in order to be able to submit map/reduce jobs remotely? Here is my mapred-site.xml file: <configuration> <property> <name>mapred.job.tracker</name> <value>master:8021</value> </property> <!-- Enable Hue plugins --> <property> <name>mapred.jobtracker.plugins</name> <value>org.apache.hadoop.thriftfs.ThriftJobTrackerPlugin</value> <description>Comma-separated list of jobtracker plug-ins to be activated. </description> </property> <property> <name>jobtracker.thrift.address</name> <value>0.0.0.0:9290</value> </property> </configuration> And this is in /etc/hosts file: 192.168.1.15 master 192.168.1.14 slave1 192.168.1.13 slave2 192.168.1.9 slave3

    Read the article

  • SLES 10 Sp3 VMware tools error on install

    - by Elgreco
    I installed SUSE enterprise server 10 SP3 on a Esx 4 server The problem starts with the installation of vmware tools. "VmwareTools-4.0.0-193498.tar.gz" The tools wont start: Unable to start services for vmware tools Paravirtual ISCSI module: Failed Guest vmxnet fast network device: Failed. I fixed the guest vmxent ERROR by changing the NIC mode. any hint? i cant be the only one with the same problem..

    Read the article

  • Remote hosts accessing AD's registry

    - by smitty user
    I have a situation here. I have an intrusion detection system and it constantly alerts me that a remote host is accessing our AD's registry remotely. Our remote hosts are mainly Windows XP and our ADs are W2K8. The remote hosts access them over SMB port 445 Is it normal for Windows hosts to access AD's remote registry? My colleagues confirmed with me that both host and AD is clean from virus with endpoint protection enabled. Thanks.

    Read the article

  • Windows SBS 2003 Remote Desktop Problem

    - by david.healed
    Hi, I used to remote access the SBS 2003 server through RDC and it has been working all the time but now I am unable to connect to the server. Whenever I pressed the "Connect" button on the Remote Desktop Connection dialog, a dialog with messages like "Connecting to: xx.xx.xx.xx" and "Configuring remote session..." appeared and then disappeared quickly, leaving the Remote Desktop Connection dialog there. How to fix the problem? Thank you.

    Read the article

  • Difference between VMWare tools?

    - by tore-
    I'm currently writing a module for puppet which installs VMWare tools to virtual nodes. I want to do this via yum and and yum-repo. VMWare have their own repo (http://packages.vmware.com/tools/esx/3.5latest/rhel5/x86_64/index.html) which I thought I could use, rather than creating my own. But then I noticed that their repo files is alot different than the rpm file used when installing VMWare Tools on the node, via the "Install/upgrade VMWare Tools" in vSphere. Does anyone know what the real difference is? Does anyone have any preferences?

    Read the article

  • Sourcing local .bashrc .vimrc without copy to remote machine

    - by David Strejc
    Does anyone have an idea or hack on how to source my local dotfiles (I will probably need more of them so this solution should work with many files) on remote machines without scp them to remote machine? Is something like scp .bashrc to /tmp folder on remote machine and then exporting BASHRC env variable the best solution? I need this because of our company policy and fast cloud servers deployment and redeployment and I don't want to touch .bashrc files on remote machine so my colleges are able to use their default env which doesn't suit me.

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >